SUPERMICRO-ECFM-Y1731-MI-MIB
376 objects
The Proprietary MIB for ECFM-Y1731 module with multiple instance capability
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmMDLevelOrNone Dot1agCfmMepId Dot1agCfmMepIdOrZero |
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowPointer RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.7 | IdentityfsMIY1731MIB | The Proprietary MIB for ECFM-Y1731 module with multiple instance capability | ||
| 1.3.6.1.4.1.10876.101.2.7.0 | NodefsMIY1731Notifications | |||
| 1.3.6.1.4.1.10876.101.2.7.0.1 | NotificationfsMIY1731FrameLossTrap | current | Any MEP can measure frame-loss. A notification is sent to the management entity with the OID of the MEP that has measured frame-loss exceeded thresholds. To wa… | |
| 1.3.6.1.4.1.10876.101.2.7.0.2 | NotificationfsMIY1731DefectConditionTrap | current | A MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whe… | |
| 1.3.6.1.4.1.10876.101.2.7.0.3 | NotificationfsMIY1731TstRecivedWithErrorTrap | current | Any MEP has received a TST PDU and the validation criteria has failed A notification is sent to the management entity with the OID of the MEP that has received… | |
| 1.3.6.1.4.1.10876.101.2.7.0.4 | NotificationfsMIY1731FrameDelayTrap | current | Any MEP can measure frame-delay. A notification is sent to the management entity with the OID of the MEP that has measured frame-delay exceeded threshold. To w… | |
| 1.3.6.1.4.1.10876.101.2.7.0.5 | NotificationfsMIY1731TxFailTrap | current | To warn the system administrator when there is CFM Tx Failure occurred. The management entity receiving the notification can identify the system from the netwo… | |
| 1.3.6.1.4.1.10876.101.2.7.1 | NodefsMIY1731MIBObjects | |||
| 1.3.6.1.4.1.10876.101.2.7.1.1 | NodefsMIY1731System | |||
| 1.3.6.1.4.1.10876.101.2.7.1.1.1 | TablefsMIY1731PortTable | not-accessible | current | Contains ECFM information specific to interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1 | RowfsMIY1731PortEntry | not-accessible | current | Each entry in this table is for each interface present in the system. This table is indexed by the fsMIY1731PortIfIndex |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.1 | ColumnfsMIY1731PortIfIndex | not-accessible | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.2 | ColumnfsMIY1731PortAisOut | read-write | current | Number of AIS PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.3 | ColumnfsMIY1731PortAisIn | read-write | current | Number of AIS PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.4 | ColumnfsMIY1731PortLckOut | read-write | current | Number of LCK PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.5 | ColumnfsMIY1731PortLckIn | read-write | current | Number of LCK PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.6 | ColumnfsMIY1731PortTstOut | read-write | current | Number of TST PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.7 | ColumnfsMIY1731PortTstIn | read-write | current | Number of TST PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.8 | ColumnfsMIY1731PortLmmOut | read-write | current | Number of LMM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.9 | ColumnfsMIY1731PortLmmIn | read-write | current | Number of LMM PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.10 | ColumnfsMIY1731PortLmrOut | read-write | current | Number of LMR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.11 | ColumnfsMIY1731PortLmrIn | read-write | current | Number of LMR PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.12 | ColumnfsMIY1731Port1DmOut | read-write | current | Number of 1DM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.13 | ColumnfsMIY1731Port1DmIn | read-write | current | Number of 1DM PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.14 | ColumnfsMIY1731PortDmmOut | read-write | current | Number of DMM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.15 | ColumnfsMIY1731PortDmmIn | read-write | current | Number of DMM PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.16 | ColumnfsMIY1731PortDmrOut | read-write | current | Number of DMR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.17 | ColumnfsMIY1731PortDmrIn | read-write | current | Number of DMR PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.18 | ColumnfsMIY1731PortApsOut | read-write | current | Number of APS PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.19 | ColumnfsMIY1731PortApsIn | read-write | current | Number of APS PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.20 | ColumnfsMIY1731PortMccOut | read-write | current | Number of MCC PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.21 | ColumnfsMIY1731PortMccIn | read-write | current | Number of MCC PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.22 | ColumnfsMIY1731PortVsmOut | read-write | current | Number of VSM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.23 | ColumnfsMIY1731PortVsmIn | read-write | current | Number of VSM PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.24 | ColumnfsMIY1731PortVsrOut | read-write | current | Number of VSR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.25 | ColumnfsMIY1731PortVsrIn | read-write | current | Number of VSR PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.26 | ColumnfsMIY1731PortExmOut | read-write | current | Number of EXM PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.27 | ColumnfsMIY1731PortExmIn | read-write | current | Number of EXM PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.28 | ColumnfsMIY1731PortExrOut | read-write | current | Number of EXR PDUs transmitted by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.29 | ColumnfsMIY1731PortExrIn | read-write | current | Number of EXR PDUs received by this interface. |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.30 | ColumnfsMIY1731PortOperStatus | read-write | current | The administrative module status of Ethernet Y1731 functionality. This enables or disables Y1731 in the system. If set to enable, enables the Y1731 for a parti… |
| 1.3.6.1.4.1.10876.101.2.7.1.1.1.1.31 | ColumnfsMIY1731LastTxFailOpcode | read-only | current | This object will contain the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure… |
| 1.3.6.1.4.1.10876.101.2.7.1.2 | NodefsMIY1731Context | |||
| 1.3.6.1.4.1.10876.101.2.7.1.2.1 | TablefsMIY1731ContextTable | not-accessible | current | List of per virtual context ECFM-Y1731 Module Parameters. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1 | RowfsMIY1731ContextEntry | not-accessible | current | Per virtual context ECFM-Y1731 module parmaters. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.1 | ColumnfsMIY1731ContextId | not-accessible | current | Identifies the virtual context in the system. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.2 | ColumnfsMIY1731ContextName | read-only | current | Name of the virtual context. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.3 | ColumnfsMIY1731FrameLossBufferClear | read-write | current | Trigger to remove the contents of Buffer maintained for storing frame-loss measured at various times. Note: Get operation value should be ignored. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.4 | ColumnfsMIY1731FrameDelayBufferClear | read-write | current | Trigger to remove the contents of Buffer maintained for storing frame-delay measured at various times. Note: Get operation value should be ignored. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.5 | ColumnfsMIY1731LbrCacheClear | read-write | current | Trigger to remove the contents of loopback cache maintained for storing loop back replies. Note: Get operation value should be ignored. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.6 | ColumnfsMIY1731ErrorLogClear | read-write | current | Trigger to remove the contents of continuity check error log maintained to store continuity check errors detected by MEP. Note: Get operation value should be i… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.7 | ColumnfsMIY1731FrameLossBufferSize | read-write | current | The Maximum size (in entries) of the Frame Loss Buffer. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.8 | ColumnfsMIY1731FrameDelayBufferSize | read-write | current | The Maximum number of entries for the Frame Delay Buffer |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.9 | ColumnfsMIY1731LbrCacheSize | read-write | current | The Maximum number of entries for the loopback replies (LBR) Cache |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.10 | ColumnfsMIY1731LbrCacheHoldTime | read-write | current | The Time (in minutes) for which loopback replies (LBR) cache table entries are retained. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.11 | ColumnfsMIY1731TrapControl | read-write | current | A vector of Boolean notification types, used to enable or disable the Y1731 notification types: bTrapBadPduReceived bTrapFrameLoss bTrapFrameDelay bTrapDefRdiC… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.12 | ColumnfsMIY1731ErrorLogStatus | read-write | current | The administrative status of Error Log. This enables or disables the logging of errors or defects detected by MEP. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.13 | ColumnfsMIY1731ErrorLogSize | read-write | current | The Maximum number of entries for the Error Log, only if fsMIY1731ErrorLogStatus is enabled. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.14 | ColumnfsMIY1731OperStatus | read-write | current | The administrative module status of Ethernet Y1731 functionality in CFM module. This enables or disables Y1731 in the system. A value of 'enabled' (1) indicate… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.1.1.15 | ColumnfsMIY1731LbrCacheStatus | read-write | current | The administrative status of LBR cache. This enables or disables caching of LBRs |
| 1.3.6.1.4.1.10876.101.2.7.1.2.2 | TablefsMIY1731MegTable | not-accessible | current | The Maintenance Entity Group table. Each row in the table represents a different Maintenance Entity Group. A Maintenance Entity Group is described in ITU-T Rec… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.2.1 | RowfsMIY1731MegEntry | not-accessible | current | The Maintenance Entity Group table entry. This entry is not lost upon reboot. It is backed up by stable storage. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.2.1.1 | ColumnfsMIY1731MegIndex | not-accessible | current | The index to the Maintenance Entity Group table. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.2.1.2 | ColumnfsMIY1731MegClientMEGLevel | read-write | current | The MEG Level at which the most immediate client layer MEPs or MIPs exist. The value (-1) is reserved to indicate that no client MEG level has been configured. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.2.1.3 | ColumnfsMIY1731MegVlanPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG u… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.2.1.4 | ColumnfsMIY1731MegDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CFM frame. Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the M… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.2.1.5 | ColumnfsMIY1731MegRowStatus | read-write | current | Indicates the status of MEG row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3 | TablefsMIY1731MeTable | not-accessible | current | The Maintenance Entity table. Each row in the table represents an ME. An ME represents a relationship between two MEPs, each configured with a single service i… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3.1 | RowfsMIY1731MeEntry | not-accessible | current | The ME table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3.1.1 | ColumnfsMIY1731MeIndex | not-accessible | current | Index of the ME table. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3.1.2 | ColumnfsMIY1731MeCciEnabled | read-write | current | If set to true, all MEPs in the ME will generate CCM messages. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3.1.3 | ColumnfsMIY1731MeCcmApplication | read-write | current | An enumerated value indicating the ETH-CC Role. Note: Performance Monitoring is applicable only for point-to-point Maintenance Entity (ME). |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3.1.4 | ColumnfsMIY1731MeMegIdIcc | read-write | current | Unique code assigned to Network Operator or Service Provider maintained by ITU-T Telecommunication Standardization Bureau. The ITU Carrier Code used to form ME… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3.1.5 | ColumnfsMIY1731MeMegIdUmc | read-write | current | Unique code assigned by Network Operator or Service Provider and is appended to fsMIY1731MeMegIdIcc to form the MEGID The unique MEGID Code used to form MEGID.… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.3.1.6 | ColumnfsMIY1731MeRowStatus | read-write | current | Indicates the status of ME row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4 | TablefsMIY1731MepTable | not-accessible | current | The Maintenance Entity Group End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1 | RowfsMIY1731MepEntry | not-accessible | current | The MEP table entry |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.1 | ColumnfsMIY1731MepIdentifier | not-accessible | current | Integer that is unique among all the MEPs in the same ME. Other definition is: a small integer, unique over a given Maintenance Entity, identifying a specific … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.2 | ColumnfsMIY1731MepOutOfService | read-write | current | A Boolean indicating the administrative service that is being or to be performed. true indicates operation needs to be performed Out-of-service and false indic… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.3 | ColumnfsMIY1731MepRdiCapability | read-write | current | The administrative status of RDI Transmission capability. This enables or disables the transmission of RDI bit in the CCM PDU by the MEP. If fsMIY1731MepRdiPer… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.4 | ColumnfsMIY1731MepRdiPeriod | read-write | current | Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability) is enabled. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.5 | ColumnfsMIY1731MepCcmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CCM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.6 | ColumnfsMIY1731MepCcmPriority | read-write | current | This Mib object is used for configuring CCM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.7 | ColumnfsMIY1731MepMulticastLbmRecvCapability | read-write | current | The administrative status of Multicast LBM frame reception. This enables or disables the capability of MEP to process the multicast LBM. A value of 'enabled' (… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.8 | ColumnfsMIY1731MepLoopbackCapability | read-write | current | The administrative status of Loopback (ping) capability. This enables or disables capability of MEP to initiate and process Loopback (ping) operation. A value … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.9 | ColumnfsMIY1731MepLbmCurrentTransId | read-only | current | Identifies the current LBM Transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.10 | ColumnfsMIY1731MepTransmitLbmStatus | read-write | current | An Enumerated value set to 'start' to initiate LBM transmission and 'stop' to stop LBM transmission. 'ready' and 'notReady' indicates whether LBM can be initia… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.11 | ColumnfsMIY1731MepTransmitLbmResultOK | read-only | current | Indicates the result of LBM transaction, - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.12 | ColumnfsMIY1731MepTransmitLbmDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitLbm… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.13 | ColumnfsMIY1731MepTransmitLbmDestMepId | read-write | current | The Maintenance association End Point Identifier of another MEP in the same Maintenance Entity to which the LBM is to be sent. This address will be used if the… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.14 | ColumnfsMIY1731MepTransmitLbmDestType | read-write | current | Indicates the Lbm Destination Type i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network). |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.15 | ColumnfsMIY1731MepTransmitLbmMessages | read-write | current | The number of Loopback messages to be transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.16 | ColumnfsMIY1731MepTransmitLbmInterval | read-write | current | Interval between two successive LBM transmissions to be used by the MEP. fsMIY1731MepTransmitLbmIntervalType are used as units for this object. Ranges applicab… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.17 | ColumnfsMIY1731MepTransmitLbmIntervalType | read-write | current | Units of fsMIY1731MepTransmitLbmInterval to be used by the MEP for LBM transmission. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.18 | ColumnfsMIY1731MepTransmitLbmDeadline | read-write | current | Specify a timeout, in seconds, before loopback (ping) exits. Loopback (ping) exits, if configured number of messages fsMIY1731MepTransmitLbmMessages are sent b… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.19 | ColumnfsMIY1731MepTransmitLbmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LBM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.20 | ColumnfsMIY1731MepTransmitLbmPriority | read-write | current | This Mib object is used for configuring LBM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.21 | ColumnfsMIY1731MepTransmitLbmVariableBytes | read-write | current | Indicates a varying number of data bytes is to be transmitted in the LBM. 'true' indicates that LBMs to be transmitted are with varying bytes of data and 'fals… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.22 | ColumnfsMIY1731MepTransmitLbmTlvType | read-write | current | Indicates the type of the TLV to be included in the LBM frame, if required to be send. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.23 | ColumnfsMIY1731MepTransmitLbmDataPattern | read-write | current | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent, determined by the fsMIY1731MepTransmitLbmTlvType. Size of d… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.24 | ColumnfsMIY1731MepTransmitLbmDataPatternSize | read-write | current | Indicates the size (bytes) of the pattern(fsMIY1731MepTransmitLbmDataPatterm) to be included in the Data TLV, if the Data TLV is to be included in the LBM. fsM… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.25 | ColumnfsMIY1731MepTransmitLbmTestPatternType | read-write | current | Indicates the type of pattern to be included in the test TLV of the LBM, if the Test TLV is selected to be sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.26 | ColumnfsMIY1731MepTransmitLbmTestPatternSize | read-write | current | Indicates the size of the pattern to be included in the Test TLV, if the Test TLV is selected to be sent. Maximum frame size supported by ECFM is 9K, following… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.27 | ColumnfsMIY1731MepTransmitLbmSeqNumber | read-only | current | The sequence number to be transmitted in the next LBM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.28 | ColumnfsMIY1731MepBitErroredLbrIn | read-write | current | The number of bit-errored LBRs received. LBR with different pattern as of Test TLV in the sent LBM is considered as bit-errored LBR |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.29 | ColumnfsMIY1731MepTransmitLtmStatus | read-write | current | A Enumerated value set to 'transmit' to initiate LTM transmission. 'ready' and 'notReady' indicates whether LTM can be initiated or not. Note: User can not set… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.30 | ColumnfsMIY1731MepTransmitLtmResultOK | read-only | current | Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.31 | ColumnfsMIY1731MepTransmitLtmFlags | read-write | current | The flags field for LTMs transmitted by the MEP. Indicates that only MAC address learned in bridge's forwarding tables is to be used to forward the LTM to the … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.32 | ColumnfsMIY1731MepTransmitLtmTargetMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitLtm… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.33 | ColumnfsMIY1731MepTransmitLtmTargetMepId | read-write | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.34 | ColumnfsMIY1731MepTransmitLtmTargetIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.35 | ColumnfsMIY1731MepTransmitLtmTtl | read-write | current | The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each entity tha… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.36 | ColumnfsMIY1731MepTransmitLtmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LTM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.37 | ColumnfsMIY1731MepTransmitLtmPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LTM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.38 | ColumnfsMIY1731MepTransmitLtmSeqNumber | read-only | current | The sequence number to be transmitted in next LBM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.39 | ColumnfsMIY1731MepTransmitLtmTimeout | read-write | current | Time for all the replies (LTR) of a LTM to be received by the MEP.No reply (LTR) would be entertained thereafter (timeout). |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.40 | ColumnfsMIY1731MepMulticastTstRecvCapability | read-write | current | The administrative status of multicast TST frame reception. This enables or disables the capability of MEP to process the multicast TST. A value of 'enabled' (… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.41 | ColumnfsMIY1731MepTransmitTstPatternType | read-write | current | Indicates the type of the pattern to be included in the test TLV of TST frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.42 | ColumnfsMIY1731MepTransmitTstVariableBytes | read-write | current | Indicates a varying number of data bytes to send in the TST. True indicates that TSTs are to be send with varying bytes of data and False indicates that TST(s)… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.43 | ColumnfsMIY1731MepTransmitTstPatternSize | read-write | current | Indicates the size of the pattern to be included in the Test TLV of the TST message. Maximum frame size supported by ECFM is 9K, following is the calculation f… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.44 | ColumnfsMIY1731MepTransmitTstDestType | read-write | current | Indicates the TST Destination Types (unicast,MEPID,Multicast) |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.45 | ColumnfsMIY1731MepTransmitTstDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitTst… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.46 | ColumnfsMIY1731MepTransmitTstDestMepId | read-write | current | The Maintenance Entity Group End Point Identifier of another MEP in the same Maintenance Association to which the TST is to be sent. This address will be used … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.47 | ColumnfsMIY1731MepTransmitTstSeqNumber | read-only | current | Sequence number to be sent in the TST message. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.48 | ColumnfsMIY1731MepTransmitTstPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted TST frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.49 | ColumnfsMIY1731MepTransmitTstDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted TST frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.50 | ColumnfsMIY1731MepTransmitTstMessages | read-write | current | The number of Test messages to be transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.51 | ColumnfsMIY1731MepTransmitTstStatus | read-write | current | An Enumerated value set to 'start' to initiate TST transmission and 'stop' to stop TST transmission. 'ready' and 'notReady' indicates whether TST can be initia… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.52 | ColumnfsMIY1731MepTransmitTstResultOK | read-only | current | Indicates the result of the operation: - true The Test Message(s) will be (or has been) sent. - false The Test Message(s) will not be sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.53 | ColumnfsMIY1731MepTransmitTstInterval | read-write | current | Interval between two successive TST transmissions to be used by the MEP. fsMIY1731MepTransmitTstIntervalType is used as units for this object. Ranges applicabl… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.54 | ColumnfsMIY1731MepTransmitTstIntervalType | read-write | current | Units of fsMIY1731MepTransmitTstInterval to be used by the MEP for TSTs transmission. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.55 | ColumnfsMIY1731MepTransmitTstDeadline | read-write | current | Specify a timeout(in seconds), before test exits. Test exits, if configured number of messages are sent before timeout. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.56 | ColumnfsMIY1731MepBitErroredTstIn | read-write | current | The number of bit-errored TST messages received. Reception of invalid TST message is considered as bit-errored TST messages. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.57 | ColumnfsMIY1731MepValidTstIn | read-write | current | Number of valid TST messages received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.58 | ColumnfsMIY1731MepTstOut | read-write | current | Number of TST messages transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.59 | ColumnfsMIY1731MepTransmitLmmStatus | read-write | current | An Enumerated value set to 'start' to initiate LM transmission and 'stop' to stop LM transmission. 'ready' and 'notReady' indicates whether LM can be initiated… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.60 | ColumnfsMIY1731MepTransmitLmmResultOK | read-only | current | Indicates the result of the operation: - true The Loss measurement Message (LMM) will be (or has been) sent. - false The Loss measurement Message (LMM) will no… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.61 | ColumnfsMIY1731MepTransmitLmmInterval | read-write | current | Interval between two successive LMM transmissions to be used by the MEP. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.62 | ColumnfsMIY1731MepTransmitLmmDeadline | read-write | current | Specify a timeout, in seconds, before loss measurement exits. Loss Measurement exits, if configured number of messages are sent before timeout. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.63 | ColumnfsMIY1731MepTransmitLmmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.64 | ColumnfsMIY1731MepTransmitLmmPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.65 | ColumnfsMIY1731MepTransmitLmmDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for LMM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.66 | ColumnfsMIY1731MepTransmitLmmDestMepId | read-write | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.67 | ColumnfsMIY1731MepTransmitLmmDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for LM frame transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.68 | ColumnfsMIY1731MepTransmitLmmMessages | read-write | current | The number of LMM messages to be transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.69 | ColumnfsMIY1731MepTxFCf | read-only | current | The counter of in-profile data frames transmitted towards its peer MEP transmitted in the last CCM or LMM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.70 | ColumnfsMIY1731MepRxFCb | read-only | current | The counter of in-profile data frames received from its peer MEP at the time of receiving the last CCM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.71 | ColumnfsMIY1731MepTxFCb | read-only | current | The value of fsMIY1731MepTxFCf field in the last CCM or LMR frame received from its peer MEP. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.72 | ColumnfsMIY1731MepNearEndFrameLossThreshold | read-write | current | Threshold value for the near-end frame loss. Notification is sent to Management Application if calculated near-end frame loss exceeds configured threshold. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.73 | ColumnfsMIY1731MepFarEndFrameLossThreshold | read-write | current | Threshold value for the far-end frame loss. Notification is sent to Management Application if calculated far-end frame loss exceeds configured threshold. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.74 | ColumnfsMIY1731MepTransmitDmStatus | read-write | current | An Enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM transmission. 'ready' and 'notReady' indicates whether 1DM… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.75 | ColumnfsMIY1731MepTransmitDmResultOK | read-only | current | Indicates the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Delay measurement Message (1DM… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.76 | ColumnfsMIY1731MepTransmitDmType | read-write | current | Type of delay measurement to be initiated: - oneWay(1) Measurement (by 1DM) is calculated at destination end. - twoWay(2) Measurement (by DMM-DMR) is calculate… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.77 | ColumnfsMIY1731MepTransmitDmInterval | read-write | current | Interval between two successive DM messages (1DM or DMM) transmissions to be used by the MEP. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.78 | ColumnfsMIY1731MepTransmitDmMessages | read-write | current | The number of DM (1DM or DMM) messages to be transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.79 | ColumnfsMIY1731MepTransmitDmmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted DMM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.80 | ColumnfsMIY1731MepTransmit1DmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.81 | ColumnfsMIY1731MepTransmitDmmPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted DMM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.82 | ColumnfsMIY1731MepTransmit1DmPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.83 | ColumnfsMIY1731MepTransmitDmDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for 1DM or DMM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.84 | ColumnfsMIY1731MepTransmitDmDestMepId | read-write | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.85 | ColumnfsMIY1731MepTransmitDmDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for Delay frame transmission. False indicates that unicast destination MAC address of the target MEP is use… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.86 | ColumnfsMIY1731MepTransmitDmDeadline | read-write | current | Specify a timeout, in seconds, before Delay Measurement operation exits. Delay Measurement operation exits, if configured number of messages are sent before ti… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.87 | ColumnfsMIY1731MepDmrOptionalFields | read-write | current | Indicates whether to include optional fields in the DMR Frame or not. True indicates optional fields are to be included and False indicates optional fields are… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.88 | ColumnfsMIY1731Mep1DmRecvCapability | read-write | current | The administrative status of 1DM Frame reception. This enables or disables the capability of MEP to process the 1DM Frames. A value of 'enabled' (1) indicates … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.89 | ColumnfsMIY1731MepFrameDelayThreshold | read-write | current | Threshold (in microseconds) for the Frame delay. Notification is sent to Management application if calculated frame delay exceeds configured threshold. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.90 | ColumnfsMIY1731MepAisCapability | read-write | current | The administrative status of AIS capability.This enables or disables transmission of AIS frames. A value of 'enabled' (1) indicates AIS frames will be transmit… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.91 | ColumnfsMIY1731MepAisCondition | read-only | current | Indicates MEP is in AIS condition. AIS condition occurs when it receives an AIS frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.92 | ColumnfsMIY1731MepAisInterval | read-write | current | Interval between two successive AIS transmissions. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.93 | ColumnfsMIY1731MepAisPeriod | read-write | current | Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability) is enabled. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.94 | ColumnfsMIY1731MepAisPriority | read-write | current | This Mib object is used for configuring AIS Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.95 | ColumnfsMIY1731MepAisDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted AIS frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.96 | ColumnfsMIY1731MepAisDestIsMulticast | read-write | current | An Enumerated value set to indicate the type of AIS transmission, unicast or multicast. 'true' indicates that AIS(s) are to be transmitted as multicast, 'false… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.97 | ColumnfsMIY1731MepAisClientMacAddress | read-write | current | A unicast destination MAC address of the Client MEP to which AIS frame is to send. This object is not supported on MEPs created over MPLS-TP networks, as these… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.98 | ColumnfsMIY1731MepLckDestIsMulticast | read-write | current | An Enumerated value set to indicate the type of LCK transmission, unicast or multicast. 'true' indicates that LCK signals are to be transmitted as multicast, '… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.99 | ColumnfsMIY1731MepLckClientMacAddress | read-write | current | A unicast destination MAC address of the Client MEP to which AIS frame is to send. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.100 | ColumnfsMIY1731MepLckCondition | read-only | current | Indicates if MEP is in LCK condition. LCK condition occurs when it receives a LCK frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.101 | ColumnfsMIY1731MepLckInterval | read-write | current | Interval between two successive LCK transmissions to be used by the MEP. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.102 | ColumnfsMIY1731MepLckPeriod | read-write | current | Time period (in seconds) for which LCK messages are to be transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.103 | ColumnfsMIY1731MepLckPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LCK frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.104 | ColumnfsMIY1731MepLckDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LCK frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.105 | ColumnfsMIY1731MepLckDelay | read-write | current | When a MEP is set as locked (for out-of-service operations), data traffic through that MEP will be blocked after this delay. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.106 | ColumnfsMIY1731MepDefectConditions | read-only | current | A vector of Boolean indicates the defect conditions. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.107 | ColumnfsMIY1731MepUnicastCcmMacAddress | read-write | current | Unicast MacAddress used for performance monitoring through Continuity Check Messages. Continuity Check Messages are to be transmitted as multicast frames incas… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.108 | ColumnfsMIY1731MepRowStatus | read-write | current | Indicates the status of MEP row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.109 | ColumnfsMIY1731MepRxFCf | read-only | current | The value of fsMIY1731MepRxFCf field is the value of in-profile data frames received from its peer MEP. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.110 | ColumnfsMIY1731Mep1DmTransInterval | read-write | current | Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The v… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.111 | ColumnfsMIY1731MepTransmitThDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Throughput Measurement. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.112 | ColumnfsMIY1731MepTransmitThDestMepId | read-write | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.113 | ColumnfsMIY1731MepTransmitThDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for Throughput Measurement. False indicates that unicast destination MAC address of the target MEP is used … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.114 | ColumnfsMIY1731MepTransmitThMessages | read-write | current | The number of Throughput messages (LBM / TST) to be transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.115 | ColumnfsMIY1731MepTransmitThPps | read-write | current | The number of Throughput messages being transmitted in a second. It is used to calculate the time interval between two successive message transmission. It's de… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.116 | ColumnfsMIY1731MepTransmitThDeadline | read-write | current | Specify a timeout, in seconds, before Throughput Measurement operation exits. Throughput Measurement operation exits, if configured number of messages are sent… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.117 | ColumnfsMIY1731MepTransmitThType | read-write | current | Type of Throughput measurement to be initiated: - oneWay(1) Measurement (by TST) is calculated at initiation end with the use of VSM PDUs. - twoWay(2) Measurem… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.118 | ColumnfsMIY1731MepTransmitThStatus | read-write | current | An Enumerated value set to 'start' to initiate Throughput transaction and 'stop' to stop Throughput transaction. 'ready' and 'notReady' indicates whether Throu… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.119 | ColumnfsMIY1731MepTransmitThFrameSize | read-write | current | Indicates the initial total packet size configured by the user including the Test TLV of the (LBM / TST) message. Maximum frame size supported by ECFM is 9K, f… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.120 | ColumnfsMIY1731MepTransmitThBurstMessages | read-write | current | The number of Throughput messages (LBM / TST) to be transmitted in a burst. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.121 | ColumnfsMIY1731MepTransmitThBurstDeadline | read-write | current | Specify the time period, in milliseconds, for which a burst exists (LB Burst / TST Burst ). |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.122 | ColumnfsMIY1731MepTransmitThBurstType | read-write | current | Throughput Burst can be initiated as: - burstMessages(1) Number of Throughput messages (LBM / TST) to be transmitted in a burst. - burstDeadline(2) Timeout, in… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.123 | ColumnfsMIY1731MepTransmitThTestPatternType | read-write | current | Indicates the type of the pattern to be included in the test TLV of Throughput frame(LBM/TST PDU) . TestTlvPattern Types can be: patternNullSignalWithoutCRC32(… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.124 | ColumnfsMIY1731MepThVerifiedBps | read-only | current | This indicates the verified throughput value. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.125 | ColumnfsMIY1731MepThUnVerifiedBps | read-only | current | This indicates the throughput value under verification. This is the throughput value for which verification is still to be performed. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.126 | ColumnfsMIY1731MepTransmitLbmMode | read-write | current | LBMs can be initiated as: - burst(1) Lbms are initiated without waiting for the reception of LBR PDUs. - requestResponse(2) After initiating the Lbm wait for t… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.127 | ColumnfsMIY1731MepLbmOut | read-write | current | Number of LBM messages transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.128 | ColumnfsMIY1731MepTransmitLbmTimeout | read-write | current | Time for all the replies (LBR) of LBMs to be received by the MEP.No reply (LBR) would be entertained thereafter (timeout). |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.129 | ColumnfsMIY1731MepTstCapability | read-write | current | The administrative status of Tst capability. This enables or disables capability of MEP to initiate and process Tst operation. A value of 'enabled' (1) indicat… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.130 | ColumnfsMIY1731MepTransmitThResultOK | read-only | current | Indicates the result of Th transaction, - true The TH Message(s) will be (or has been) sent. - false The TH Message(s) will not be sent due to some internal pr… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.131 | ColumnfsMIY1731MepThVerifiedFrameSize | read-only | current | Indicates the Frame Size with which verified Throughput is achieved |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.132 | ColumnfsMIY1731MepAisOffload | read-create | current | The administrative MEP AIS Offloading status. When value 'enabled' (1) is set, the AIS Offloading is enabled for the MEP. When value 'disabled' (2) is set, the… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.133 | ColumnfsMIY1731MepLbmTTL | read-write | current | This object specifies the time-to-live(TTL) value to be used in the MPLS outer label header when loopback connectivity verification (ping) or diagnostic tests … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.134 | ColumnfsMIY1731MepLbmIcc | read-write | current | This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC based MPLS-TP network for which loopback connectivity verification (ping) or diagnostic … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.135 | ColumnfsMIY1731MepLbmNodeId | read-write | current | This object specifies the Node Id of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests has to be … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.4.1.136 | ColumnfsMIY1731MepLbmIfNum | read-write | current | This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests h… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.5 | TablefsMIY1731ErrorLogTable | not-accessible | current | The Error Log table. Size of this table is defined by the object fsMIY1731ErrorLogSize. If the addition of an error entry would exceed the resources allocated … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.5.1 | RowfsMIY1731ErrorLogEntry | not-accessible | current | The Error Log Table. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.5.1.1 | ColumnfsMIY1731ErrorLogSeqNumber | not-accessible | current | Locally maintained sequence number of Error Log Entries |
| 1.3.6.1.4.1.10876.101.2.7.1.2.5.1.2 | ColumnfsMIY1731ErrorLogTimeStamp | read-only | current | Identifies the time at which error or defect is detected by a MEP. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.5.1.3 | ColumnfsMIY1731ErrorLogType | read-only | current | Indicates the type of error or defect detected by MEP. Type of errors/defects are: bDefRdiCondition, bDefLossOfContinuity, bDefUnexpectedPeriod, bDefUnexpected… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.5.1.4 | ColumnfsMIY1731ErrorLogRMepIdentifier | read-only | current | Identifies the specific remote MEP due to which defect is detected. Zero indicates that no remote MEP contributes for the occurence of defect. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.6 | TablefsMIY1731LtrTable | not-accessible | current | This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allo… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.6.1 | RowfsMIY1731LtrEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.6.1.1 | ColumnfsMIY1731LtrSeqNumber | not-accessible | current | Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.6.1.2 | ColumnfsMIY1731LtrReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. fsMIY1731LtrReceiveOrder are assigned sequentially from 1, in… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.6.1.3 | ColumnfsMIY1731LtrReceiveTime | read-only | current | Indicates the time taken to receive a LTR in response to a transmitted LTM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7 | TablefsMIY1731LbmTable | not-accessible | current | This table extends the MEP table and contains information of Loopback messages sent by a specific MEP. SNMP SMI does not allow to state in a MIB that an object… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1 | RowfsMIY1731LbmEntry | not-accessible | current | The Loopback Message table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.1 | ColumnfsMIY1731LbmTransId | not-accessible | current | Transaction Identifier identifies a loopback or ping (LBM)transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.2 | ColumnfsMIY1731LbmSeqNumber | not-accessible | current | Sequence number returned by a previous transmit loopback message, indicating which LBM's response is going to be returned. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.3 | ColumnfsMIY1731LbmBytesSent | read-only | current | The size (in bytes) of the LBM transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.4 | ColumnfsMIY1731LbmTargetMacAddress | read-only | current | Mac Address of the target MP (MEP or MIP) to which LBM has been sent. For multicast LBM this object should not be considered. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.5 | ColumnfsMIY1731LbmUnexptedLbrIn | read-only | current | The Number of unexpected Lbrs Received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.6 | ColumnfsMIY1731LbmDuplicatedLbrIn | read-only | current | The Number of Duplicated Lbrs Received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.7 | ColumnfsMIY1731LbmNumOfResponders | read-only | current | The Number of Responders which have sent the reply (LBR) for the initiated LBM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.8 | ColumnfsMIY1731LbmDestType | read-only | current | Indicates the type (i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination for which LBM was sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.9 | ColumnfsMIY1731LbmDestMepId | read-only | current | Target MEP ID to which LBM was sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.10 | ColumnfsMIY1731LbmIcc | read-only | current | This object specifies the ICC of the MIP node in ICC based MPLS-TP network for which LBM was sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.11 | ColumnfsMIY1731LbmNodeId | read-only | current | This object specifies the Node Id of the specific MIP node in MPLS-TP network for which LBM was sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.12 | ColumnfsMIY1731LbmIfNum | read-only | current | This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which LBM was sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.7.1.13 | ColumnfsMIY1731LbmTTL | read-only | current | This object specifies the time-to-live(TTL) value used in the MPLS outer label header in the LBM which was sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8 | TablefsMIY1731LbrTable | not-accessible | current | This table extends the MEP table and contains a list of Loopback replies received by a specific MEP in response to a loopback message. Size of this table is de… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1 | RowfsMIY1731LbrEntry | not-accessible | current | The Loopback Reply table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.1 | ColumnfsMIY1731LbrSeqNumber | not-accessible | current | Sequence number received in the Loopback reply. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.2 | ColumnfsMIY1731LbrReceiveOrder | not-accessible | current | Order in which LBRs are received for a same Sequence Number field value. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.3 | ColumnfsMIY1731LbrResponderMacAddress | read-only | current | The Mac Address of the MP which has sent the response for the LBM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.4 | ColumnfsMIY1731LbrReceiveTime | read-only | current | Time taken to receive a LBR in response to the transmitted LBM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.5 | ColumnfsMIY1731LbrErrorType | read-only | current | Indicates that received loobback reply is errored one. bit 0 indicates bad MSDU (when data in the LBR does not match what was sent in the LBM) bit 1 indicates … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.6 | ColumnfsMIY1731LbrDestType | read-only | current | Indicates the Type ((i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination from which LBR was received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.7 | ColumnfsMIY1731LbrDestMepId | read-only | current | MEP which has sent the response for the LBM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.8 | ColumnfsMIY1731LbrICC | read-only | current | This object specifies the ICC of the MIP node in ICC based MPLS-TP network from which LBR was received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.9 | ColumnfsMIY1731LbrNodeId | read-only | current | This object specifies the Node Id of the specific MIP node in MPLS-TP network from which LBR was received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.8.1.10 | ColumnfsMIY1731LbrIfNum | read-only | current | This object specifies the Interface Number of the specific MIP node in MPLS-TP network from which LBR was received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9 | TablefsMIY1731LbStatsTable | not-accessible | current | This table extends the MEP table and contains output of loopback or ping transaction. Output includes number of replies recieved, time taken for a reply to com… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1 | RowfsMIY1731LbStatsEntry | not-accessible | current | The Loopback Statistics table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1.1 | ColumnfsMIY1731LbStatsLbmOut | read-only | current | Number of LBMs sent in a loopback or ping transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1.2 | ColumnfsMIY1731LbStatsLbrIn | read-only | current | Number of replies (LBR) received in a loopback or ping transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1.3 | ColumnfsMIY1731LbStatsLbrTimeAverage | read-only | current | Average time taken to receive the replies (LBR) for the current loopback or ping transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1.4 | ColumnfsMIY1731LbStatsLbrTimeMin | read-only | current | Minimum time taken to receive the replies (LBR) for the current loopback or ping transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1.5 | ColumnfsMIY1731LbStatsLbrTimeMax | read-only | current | Maximum time taken to receive the replies (LBR) for the current loopback or ping transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1.6 | ColumnfsMIY1731LbStatsTotalResponders | read-only | current | Total Number of Responders which have sent the reply (LBR) for the initiated LBM. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.9.1.7 | ColumnfsMIY1731LbStatsAvgLbrsPerResponder | read-only | current | Average Number of LBR(s) received per Responder. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10 | TablefsMIY1731FdTable | not-accessible | current | This table extends the MEP table and contains a list of information about the Frame Delay measured at various times by a MEP. Size of this table is defined by … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1 | RowfsMIY1731FdEntry | not-accessible | current | The Frame delay buffer table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.1 | ColumnfsMIY1731FdTransId | not-accessible | current | Identifies a delay measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.2 | ColumnfsMIY1731FdSeqNumber | not-accessible | current | Locally maintained sequence number of FD Entries |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.3 | ColumnfsMIY1731FdTxTimeStampf | read-only | current | TxTimeStampf value sent in a Delay measurement message (DMM). or received in 1DM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.4 | ColumnfsMIY1731FdMeasurementTimeStamp | read-only | current | Time at which measurement takes place. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.5 | ColumnfsMIY1731FdPeerMepMacAddress | read-only | current | Identifies the Mac Address of the peer MEP to which DM message(s) is sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.6 | ColumnfsMIY1731FdIfIndex | read-only | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which meas… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.7 | ColumnfsMIY1731FdDelayValue | read-only | current | This object contains the measured frame delay value. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.8 | ColumnfsMIY1731FdIFDV | read-only | current | Inter frame delay variation, (IFDV), calculated with respect to current transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.9 | ColumnfsMIY1731FdFDV | read-only | current | Frame delay variation, (IFDV), calculated with respect to current transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.10.1.10 | ColumnfsMIY1731FdMeasurementType | read-only | current | Type of the frame-delay measurement (oneWay or twoWay). |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11 | TablefsMIY1731FdStatsTable | not-accessible | current | This table extends the MEP table and contains output of one-way and two-way delay measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1 | RowfsMIY1731FdStatsEntry | not-accessible | current | The Delay Statistics table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.1 | ColumnfsMIY1731FdStatsTimeStamp | read-only | current | Time stamp at which one-way or two-way delay measurement (DMM) is initiated. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.2 | ColumnfsMIY1731FdStatsDmmOut | read-only | current | Number of DMMs sent for a two-way delay measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.3 | ColumnfsMIY1731FdStatsDmrIn | read-only | current | Number of requests received for a one-way or responses received for two-way delay measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.4 | ColumnfsMIY1731FdStatsDelayAverage | read-only | current | Average delay measured for a one-way or two-way delay measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.5 | ColumnfsMIY1731FdStatsFDVAverage | read-only | current | Frame Delay Variation (FDV) average calculated for a delay measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.6 | ColumnfsMIY1731FdStatsIFDVAverage | read-only | current | Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.7 | ColumnfsMIY1731FdStatsDelayMin | read-only | current | This object contains the minimum value of frame-delay. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.11.1.8 | ColumnfsMIY1731FdStatsDelayMax | read-only | current | This object contains the maximum value of frame-delay. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12 | TablefsMIY1731FlTable | not-accessible | current | This table extends the MEP table and contains a information about the Frame-loss measured at various times by a MEP. Size of this table is defined by the objec… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1 | RowfsMIY1731FlEntry | not-accessible | current | The Frame Loss Statistics table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.1 | ColumnfsMIY1731FlTransId | not-accessible | current | Identifies a loss measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.2 | ColumnfsMIY1731FlSeqNumber | not-accessible | current | Locally maintained sequence number of Frame Loss Entries |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.3 | ColumnfsMIY1731FlMeasurementTimeStamp | read-only | current | Time at which frame-loss is actually measured. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.4 | ColumnfsMIY1731FlPeerMepMacAddress | read-only | current | Identifies the Mac Address of the peer MEP to which loss measurement message(s) is sent. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.5 | ColumnfsMIY1731FlIfIndex | read-only | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which meas… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.6 | ColumnfsMIY1731FlFarEndLoss | read-only | current | This object contains the far-end frame-loss value. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.7 | ColumnfsMIY1731FlNearEndLoss | read-only | current | This object contains the near-end frame-loss value. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.12.1.8 | ColumnfsMIY1731FlMeasurementTime | read-only | current | Time taken to measure frame-loss. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13 | TablefsMIY1731FlStatsTable | not-accessible | current | This table extends the MEP table and contains output of frame-loss measurement transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1 | RowfsMIY1731FlStatsEntry | not-accessible | current | The Frame Loss Statistics table entry. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.1 | ColumnfsMIY1731FlStatsTimeStamp | read-only | current | Time stamp at which frame-loss measurement transaction is initiated. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.2 | ColumnfsMIY1731FlStatsMessagesOut | read-only | current | Number of frames with ETH-LM information sent for a transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.3 | ColumnfsMIY1731FlStatsMessagesIn | read-only | current | Number of frames with ETH-LM information received for a transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.4 | ColumnfsMIY1731FlStatsFarEndLossAverage | read-only | current | Average of the far-end frame-loss measured for a transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.5 | ColumnfsMIY1731FlStatsNearEndLossAverage | read-only | current | Average of the near-end frame-loss measured for a transaction. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.6 | ColumnfsMIY1731FlStatsMeasurementType | read-only | current | Type of the frame-loss measurement (Single-ended or Dual-ended) done. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.7 | ColumnfsMIY1731FlStatsFarEndLossMin | read-only | current | This object contains the minimum value of far-end frame-loss. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.8 | ColumnfsMIY1731FlStatsFarEndLossMax | read-only | current | This object contains the maxmium value of far-end frame-loss. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.9 | ColumnfsMIY1731FlStatsNearEndLossMin | read-only | current | This object contains the minimum value of near-end frame-loss. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.13.1.10 | ColumnfsMIY1731FlStatsNearEndLossMax | read-only | current | This object contains the maxmium value of near-end frame-loss. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.14 | TablefsMIY1731MplstpExtRemoteMepTable | not-accessible | current | The Remote Maintenance End Point table for the Y.1731 extensions over MPLS-TP networks. Each row in the table realizes an ME for the MPLS-TP networks using the… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.14.1 | RowfsMIY1731MplstpExtRemoteMepEntry | not-accessible | current | An instance of the Remote Maintenenace End Point table entry used in Y.1731 based MPLS-TP networks. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.14.1.1 | ColumnfsMIY1731MplstpExtRMepIdentifier | not-accessible | current | Maintenance End Point Identifier of a Remote MEP associated with the Local-MEP(fsMIY1731MepIdentifier) which together constitutes an ME. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.14.1.2 | ColumnfsMIY1731MplstpExtRMepServicePointer | read-create | current | This object identifies the MPLS Transport path which represents the ME. This object may point to an entry in the mplsTunnelTable, if the value of the object fs… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.14.1.3 | ColumnfsMIY1731MplstpExtRMepRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15 | TablefsMIY1731StatsTable | not-accessible | current | List of per virtual context ECFM-Y1731 Module Statistics. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1 | RowfsMIY1731StatsEntry | not-accessible | current | Per virtual context ECFM-Y1731 Module Statistics. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.1 | ColumnfsMIY1731AisOut | read-write | current | Number of AIS PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.2 | ColumnfsMIY1731AisIn | read-write | current | Number of AIS PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.3 | ColumnfsMIY1731LckOut | read-write | current | Number of LCK PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.4 | ColumnfsMIY1731LckIn | read-write | current | Number of LCK PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.5 | ColumnfsMIY1731TstOut | read-write | current | Number of TST PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.6 | ColumnfsMIY1731TstIn | read-write | current | Number of TST PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.7 | ColumnfsMIY1731LmmOut | read-write | current | Number of LMM PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.8 | ColumnfsMIY1731LmmIn | read-write | current | Number of LMM PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.9 | ColumnfsMIY1731LmrOut | read-write | current | Number of LMR PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.10 | ColumnfsMIY1731LmrIn | read-write | current | Number of LMR PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.11 | ColumnfsMIY17311DmOut | read-write | current | Number of 1DM PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.12 | ColumnfsMIY17311DmIn | read-write | current | Number of 1DM PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.13 | ColumnfsMIY1731DmmOut | read-write | current | Number of DMM PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.14 | ColumnfsMIY1731DmmIn | read-write | current | Number of DMM PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.15 | ColumnfsMIY1731DmrOut | read-write | current | Number of DMR PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.16 | ColumnfsMIY1731DmrIn | read-write | current | Number of DMR PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.17 | ColumnfsMIY1731ApsOut | read-write | current | Number of APS PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.18 | ColumnfsMIY1731ApsIn | read-write | current | Number of APS PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.19 | ColumnfsMIY1731MccOut | read-write | current | Number of MCC PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.20 | ColumnfsMIY1731MccIn | read-write | current | Number of MCC PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.21 | ColumnfsMIY1731VsmOut | read-write | current | Number of VSM PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.22 | ColumnfsMIY1731VsmIn | read-write | current | Number of VSM PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.23 | ColumnfsMIY1731VsrOut | read-write | current | Number of VSR PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.24 | ColumnfsMIY1731VsrIn | read-write | current | Number of VSR PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.25 | ColumnfsMIY1731ExmOut | read-write | current | Number of EXM PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.26 | ColumnfsMIY1731ExmIn | read-write | current | Number of EXM PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.27 | ColumnfsMIY1731ExrOut | read-write | current | Number of EXR PDUs transmitted. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.28 | ColumnfsMIY1731ExrIn | read-write | current | Number of EXR PDUs received. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.15.1.29 | ColumnfsMIY1731TxFailOpcode | read-only | current | This object contains the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure tra… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16 | TablefsMIY1731MepAvailabilityTable | not-accessible | current | The Maintenance Entity Group End Point (MEP) Availability table. Each row in the table is associated with a different MEP. This table uses three indices. The f… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1 | RowfsMIY1731MepAvailabilityEntry | not-accessible | current | The MEP Availability table entry |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.1 | ColumnfsMIY1731MepAvailabilityStatus | read-write | current | An Enumerated value set to 'start' to initiate Avilability Measurement and 'stop' to stop Availability Measurement. 'ready' and 'notReady' indicates whether Av… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.2 | ColumnfsMIY1731MepAvailabilityResultOK | read-only | current | Indicates the result of the operation: - true Initiating Availability measurement by sending LM Message (LMM) is successful. - false Initiating Availability me… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.3 | ColumnfsMIY1731MepAvailabilityInterval | read-write | current | A time interval much smaller than Deadline, Interval between two successive LMM transmissions to be used by the MEP for calculating Availability. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.4 | ColumnfsMIY1731MepAvailabilityDeadline | read-write | current | Specify a timeout, in seconds, the Time interval to conduct the availability functionality |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.5 | ColumnfsMIY1731MepAvailabilityLowerThreshold | read-write | current | Availability frame loss ratio threshold, the lower threshold used to define an interval as available. If far-end loss ratio is lesser than configured lower thr… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.6 | ColumnfsMIY1731MepAvailabilityUpperThreshold | read-write | current | Unavailability frame loss ratio threshold, the upper threshold to define an interval as unavailable. If far-end loss ratio is greater than configured upper thr… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.7 | ColumnfsMIY1731MepAvailabilityModestAreaIsAvailable | read-write | current | Defines whether the area between upper and lower threshold is referred as available or unavailable. True - If Calculated Frame loss ration falls between upper … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.8 | ColumnfsMIY1731MepAvailabilityWindowSize | read-write | current | Number of consecutive small time intervals for assessing availability |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.9 | ColumnfsMIY1731MepAvailabilityDestMacAddress | read-write | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Availability Measurement. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.10 | ColumnfsMIY1731MepAvailabilityDestMepId | read-write | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.11 | ColumnfsMIY1731MepAvailabilityDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for LMM transmission during Availability Measurement. False indicates that unicast destination MAC address … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.12 | ColumnfsMIY1731MepAvailabilityType | read-write | current | defStatic indicates that the algorithm for Availability Measurement is static window algorithm. The availability measurement will be conducted as per MEF 10.2 … |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.13 | ColumnfsMIY1731MepAvailabilitySchldDownInitTime | read-write | current | Time when Scheduled down time is initiated, denotes the beginning of time interval agreed upon by both the Subscriber and Service Provider during which a servi… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.14 | ColumnfsMIY1731MepAvailabilitySchldDownEndTime | read-write | current | Time when Scheduled down time is ending, denotes the ending of time interval agreed upon by both the Subscriber and Service Provider during which a service may… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.15 | ColumnfsMIY1731MepAvailabilityPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.16 | ColumnfsMIY1731MepAvailabilityDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.17 | ColumnfsMIY1731MepAvailabilityPercentage | read-only | current | This object contains the percentage of Availability If fsMIY1731MepAvailabilityType is selected as defStatic, this object contains the Availability Performance… |
| 1.3.6.1.4.1.10876.101.2.7.1.2.16.1.18 | ColumnfsMIY1731MepAvailabilityRowStatus | read-write | current | Indicates the status of MEP Availability Table row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FsY1731AisLckInterval | INTEGER { interval1s (1), interval1min (2) } | current | Indicates the interval at which AIS or LCK(s) are sent by a MEP. The possible values are: interval1s(1) AIS or LCK(s) are sent every second. interval1min(2) AIS or LCK(s) are sent every minute. Note: enumerations start … |
| FsY1731AvailabilityInterval | INTEGER { interval100ms (1), interval1s (2), interval10s (3), interval1min (4), interval10min (5), interval30min (6), interval1hour (7) } | current | Indicates the interval at which Availability Measurement is carried out by sendiong LMM. The possible values are: interval100ms(1) Availability Measurement is carried out at every 100 milliseconds. interval1s(2) Availab… |
| FsY1731AvailabilityType | INTEGER { defStatic (1), defSliding (2) } | current | Indicates type of availability measurement to be carried out The valid values are: Static (1) Static Availability Measurement will be carried out. Sliding(2) Sliding Availability Measurement will be carried out. |
| FsY1731CcmApplication | INTEGER { ccFaultManagement (0), ccPerformanceMonitoring (1), ccProtectionSwitching (2) } | current | An enumerated value indicates the ETH-CC role to be or currently being performed. ccFaultManagement(0) Indicates ETH-CC is used for Fault Management. ccPerformanceMonitoring(1) Indicates ETH-CC is used for Performance M… |
| FsY1731DestType | INTEGER { unicast (0), mepid (1), multicast (2), mipid (3) } | current | An Enumerated value indicates the type of transaction, unicast ,through MEPID or multicast. unicast(0) Indicates the operation is to be unicast. mepid(1) Indicates that MEPID of the target MEP is used for operation. mul… |
| FsY1731EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| FsY1731ErrorLogType | INTEGER{ logRdiConditionEntry(1), logLossOfContinuityEntry(2), logUnexpectedPeriodEntry(3), logUnexpectedMepEntry(4), logMisMergeEntry(5), logUnexpectedMegLevelEntry(6), logLocalLinkFailureEntry(7), logInternalHWFailureEntry(8), logInternalSWFailureEntry(9), logAisConditonEntry(10), logLckConditionEntry(11), logRdiConditionExit(12), logLossOfContinuityExit(13), logUnexpectedPeriodExit(14), logUnexpectedMepExit(15), logMisMergeExit(16), logUnexpectedMegLevelExit(17), logLocalLinkFailureExit(18), logInternalHWFailureExit(19), logInternalSWFailureExit(20), logAisConditonExit(21), logLckConditionExit(22) } | current | A MEP can detect and report a number of defects. logRdiConditionEntry(1) The MEP has encountered remote MEP defect condition entry. logLossOfContinuityEntry(2) The MEP has encountered loss of continuity defect condition… |
| FsY1731LbrErrType | INTEGER { none (0), badMacServiceDataUnit (1), crc32CheckFailure (2) } | current | An enumerated value indicates the received loopback reply error type. none (0) Indicates that no error was encountered in the received LBR. BadMacServiceDataUnit (1) Indicates bad/corrupt mac service data unit Crc32Chec… |
| FsY1731LmmInterval | INTEGER { interval100ms (1), interval1s (2), interval10s (3), interval1min (4), interval10min (5) } | current | Indicates the interval at which LMMs are sent by a MEP. The possible values are: interval100ms(1) LMMs are sent every 100 milliseconds. interval1s(2) LMMs are sent every second. interval10s(3) LMMs are sent every 10 sec… |
| FsY1731MepDefects | BITS{ none (0), bDefRdiCondition (1), bDefLossOfContinuity (2), bDefUnexpectedPeriod (3), bDefUnexpectedMep (4), bDefMisMerge (5), bDefUnexpectedMegLevel (6), bDefLocalLinkFailure (7), bDefInternalHWFailure (8), bDefInternalSWFailure (9), bDefAisCondition (10), bDefLckCondition (11) } | current | A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects conditions are: none (0) Dummy Bit bDefRdiCondition (1) The MEP has encountered remote MEP defect cond… |
| FsY1731TestTlvPatternType | INTEGER { patternNullSignalWithoutCRC32 (0), patternNullSignalWithCRC32 (1), patternPRBSWithoutCRC32 (2), patternPRBSWithCRC32 (3) } | current | An enumerated value indicates the Test pattern for Test TLV to be included in LBM or TST message. patternNullSignalWithoutCRC32(0) Pattern contains null signal without any CRC. patternNullSignalWithCRC32(1) Pattern cont… |
| FsY1731TimeIntervalType | INTEGER { microseconds (1), milliseconds (2), seconds (3) } | current | Indicates the units of interval at which LBM or TSTs are sent by a MEP. The possible values are: microseconds(1) units for LBMs or TSTs transmission interval are microseconds. milliseconds(2) units for LBMs or TSTs tran… |
| FsY1731TimeRepresentation | OCTET STRING (SIZE (8)) | current | A specification used to represent time stamp. field octets contents range 1 1-4 seconds 0..4294967295 2 5-8 nanoseconds 0..0..4294967295 |
| FsY1731TransmitLbmTlvTypeOrNone | INTEGER { none (0), dataTlv (1), testTlv (2) } | current | An enumerated value indicates which TLV is to be included in the LBM. none(0) Indicates No TLV is included in the LBM. dataTlv (1) Indicates Data TLV is included in the LBM. testTlv (2) Indicates Test TLV is included in… |
| FsY1731TransmitStatus | INTEGER { ready (0), notReady (1), start (2), stop (3) } | current | An enumerated value indicates whether particular transmission can be initiated. ready(0) Indicates transmission can be initiated. notReady(1) Indicates transmission can not be initiated. start(2) To initiate the transmi… |
| FsY1731Traps | BITS{ none (0), bTrapTstReceivedWithError (1), bTrapFrameLoss (2), bTrapFrameDelay (3), bTrapDefRdiCondition (4), bTrapDefLossOfContinuity (5), bTrapDefUnexpectedPeriod (6), bTrapDefUnexpectedMep (7), bTrapDefMisMerge (8), bTrapDefUnexpectedMegLevel (9), bTrapDefLocalLinkFailure (10), bTrapDefInternalHWFailure (11), bTrapDefInternalSWFailure (12), bTrapDefAisCondition (13), bTrapDefLckCondition (14) } | current | Indicates the notifications to be provided to Management entity. Multiple notifications can be enabled at the same time. Notifictions are: none(0) Dummy Bit bTrapTstReceivedWithError(1) The MEP has received a TST PDU wi… |