SUPERMICRO-ELPS-MIB
123 objects
This MIB is a proprietary MIB for ELPS to provide Enhanced linear protection switching as per ITU-T G.8031/Y.1342 for vlan services and draft-ietf-mpls-tp-linear-protection-02 for MPLS LSP and Pseudowires.
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmMepId |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-SMI | Counter32 enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowPointer RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.25 | Identityfselps | This MIB is a proprietary MIB for ELPS to provide Enhanced linear protection switching as per ITU-T G.8031/Y.1342 for vlan services and draft-ietf-mpls-tp-line… | ||
| 1.3.6.1.4.1.10876.101.2.25.1 | NodefsElpsSystem | |||
| 1.3.6.1.4.1.10876.101.2.25.1.1 | ScalarfsElpsGlobalTraceOption | read-write | current | This object is used to enable the global trace statements which are not context specific. For example, - Traces present in the Task Initialization. - Traces pr… |
| 1.3.6.1.4.1.10876.101.2.25.1.2 | ScalarfsElpsPSCChannelCode | read-write | obsolete | *******************Objobsoleteobsolete**************** This object indicates the G-ACh channel number to be used for transmitting the Protection State Coordina… |
| 1.3.6.1.4.1.10876.101.2.25.1.3 | ScalarfsElpsRapidTxTime | read-write | current | This objects indicates the time interval for rapid transmission of first three APS/PSC messages upon a protection state change in a protection group. Unit of t… |
| 1.3.6.1.4.1.10876.101.2.25.2 | NodefsElpsContext | |||
| 1.3.6.1.4.1.10876.101.2.25.2.1 | TablefsElpsContextTable | not-accessible | current | List of ELPS Module parameters per Virtual Context. |
| 1.3.6.1.4.1.10876.101.2.25.2.1.1 | RowfsElpsContextEntry | not-accessible | current | Per virtual context ELPS module parameters. An entry in this table gets created as and when a virtual context is created. |
| 1.3.6.1.4.1.10876.101.2.25.2.1.1.1 | ColumnfsElpsContextId | not-accessible | current | The context identifier is used to distinguish between the multiple virtual bridge contexts within a bridge. |
| 1.3.6.1.4.1.10876.101.2.25.2.1.1.2 | ColumnfsElpsContextSystemControl | read-write | current | The administrative system control status requested by management for ELPS. The value start(1) indicates that ELPS should be active in the virtual context and o… |
| 1.3.6.1.4.1.10876.101.2.25.2.1.1.3 | ColumnfsElpsContextModuleStatus | read-write | current | The administrative module status requested by management for ELPS. The value enable(1) indicates that ELPS should be enabled in the virtual context and on all … |
| 1.3.6.1.4.1.10876.101.2.25.2.1.1.4 | ColumnfsElpsContextTraceInputString | read-write | current | This object stores the trace option string input given by the user. Based on the input to this object, trace statements corresponding to the given options are … |
| 1.3.6.1.4.1.10876.101.2.25.2.1.1.5 | ColumnfsElpsContextEnableTrap | read-write | current | The column is used to enable or disable the transmission of TRAP notification messages. |
| 1.3.6.1.4.1.10876.101.2.25.2.1.1.6 | ColumnfsElpsContextVlanGroupManager | read-write | current | This object identifies the module that manages the grouping of vlans in this virtual context. mstp(1) - MSTP(Multiple Spanning Tree Protocol) module manages th… |
| 1.3.6.1.4.1.10876.101.2.25.3 | NodefsElpsPg | |||
| 1.3.6.1.4.1.10876.101.2.25.3.1 | TablefsElpsPgConfigTable | not-accessible | current | The protection group configuration table for creating and configuring the protection groups in any virtual context. Each entry in this table corresponds to a p… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1 | RowfsElpsPgConfigEntry | not-accessible | current | The protection group table entry. Each entry in this table contains the required attribute values which define the protection group entry. |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.1 | ColumnfsElpsPgConfigPgId | not-accessible | current | The unique identifier for the protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.2 | ColumnfsElpsPgConfigType | read-write | current | This object indicates if the protection group needs to provide protection for an individual service or a list of services. If the value is 'individual(1)', the… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.3 | ColumnfsElpsPgConfigServiceType | read-write | current | This object indicates the type of transport service for which this protection group will provide protection. The following service types are supported - vlan(1… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.4 | ColumnfsElpsPgConfigMonitorMechanism | read-write | current | This object indicates the type of monitoring mechanism used for detecting faults for this protection group entry. If the value of this object is not 'none' for… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.5 | ColumnfsElpsPgConfigIngressPort | read-write | current | This object indicates the port through which the traffic ingresses for the working and protection transport services into the protection domain. This port defi… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.6 | ColumnfsElpsPgConfigWorkingPort | read-write | current | This object indicates the working port which carries the normal traffic in the absence of any failure. For 'vlan' service type, this object is mandatory and sh… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.7 | ColumnfsElpsPgConfigProtectionPort | read-write | current | This object indicates the protection port which carries the normal traffic upon failure of the working transport entity. For 'vlan' service type, this object i… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.8 | ColumnfsElpsPgConfigWorkingServiceValue | read-write | current | This object indicates the service identifier of the working service which carries the normal traffic in the absence of any failure. This object is applicable o… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.9 | ColumnfsElpsPgConfigProtectionServiceValue | read-write | current | This object indicates the service identifier of the protection service which carries the normal traffic upon failure of the working entity. This object is appl… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.10 | ColumnfsElpsPgConfigOperType | read-write | current | This object is used to indicate the operation type/mode of the protection group entry. If the value is set to 'revertive(1)', then normal traffic will be shift… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.11 | ColumnfsElpsPgConfigProtType | read-write | current | This object is used to indicate the protection architecture type of the protection group entry. Protection architecture types supported are given below: - 'one… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.12 | ColumnfsElpsPgConfigName | read-write | current | The name given to the protection group entry. This object is used to refer the protection group in addition to the protection group Id. The default value for t… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.13 | ColumnfsElpsPgConfigRowStatus | read-write | current | This object indicates the status of this row/entry. Setting this object to Active is not allowed in the following scenarios: - If the value of the column fsElp… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.14 | ColumnfsElpsPgConfigWorkingServicePointer | read-write | current | This object is applicable for 'mplsLSP' and 'mplsPw' service types. When fsElpsPgConfigServiceType is 'mplsLSP' : - This object should be configured with the o… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.15 | ColumnfsElpsPgConfigWorkingReverseServicePointer | read-write | current | This object is applicable for 'mplsLSP' service type only. When fsElpsPgConfigServiceType is 'mplsLSP' : - Configuring this object is optional. - This object s… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.16 | ColumnfsElpsPgConfigProtectionServicePointer | read-write | current | This object is applicable for 'mplsLSP' and 'mplsPw' service types. When fsElpsPgConfigServiceType is 'mplsLSP' : - This object should be configured with the o… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.17 | ColumnfsElpsPgConfigProtectionReverseServicePointer | read-write | current | This object is applicable for 'mplsLSP' service type only. When fsElpsPgConfigServiceType is 'mplsLSP' : - Configuring this object is optional. - This object s… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.18 | ColumnfsElpsPgConfigWorkingInstanceId | read-write | current | This is the working instance which contains the VLAN to be protected in this protection group. If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id sh… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.19 | ColumnfsElpsPgConfigProtectionInstanceId | read-write | current | This is the protection instance which contains the protection VLANs in this protection group. If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id sho… |
| 1.3.6.1.4.1.10876.101.2.25.3.1.1.20 | ColumnfsElpsPgPscVersion | read-write | current | This object indicates the PSC header version number to be used for transmitting the Protection State Coordination (PSC) control packet through the generic asso… |
| 1.3.6.1.4.1.10876.101.2.25.3.2 | TablefsElpsPgCmdTable | not-accessible | current | The protection group command table. Each entry in this table corresponds to a configured protection group on a virtual context in this bridge. Entry in this ta… |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1 | RowfsElpsPgCmdEntry | not-accessible | current | The protection group command table entry. Each entry in this table contains objects that operate on the state event machine for the protection group and can be… |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.1 | ColumnfsElpsPgCmdHoTime | read-write | current | This column is used to configure the hold-off timer. The purpose is to allow a server layer protection mechanism to have a chance to fix the problem before swi… |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.2 | ColumnfsElpsPgCmdWTR | read-write | current | This column is used to configure the wait-to-restore timer for the protection group. The timer has a period from 1 to 1000 minutes, configurable in steps of 1 … |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.3 | ColumnfsElpsPgCmdExtCmd | read-write | current | This column is used by the operator to request that the protection group state machine perform some administrative operation. The operator requests a command b… |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.4 | ColumnfsElpsPgCmdExtCmdStatus | read-only | current | This column indicates the status of the most recent administrative command issued to this protection group through the fsElpsPgCmdExtCmd object. |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.5 | ColumnfsElpsPgCmdLocalCondition | read-only | current | This column indicates the most recent local condition that had occurred for this protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.6 | ColumnfsElpsPgCmdLocalConditionStatus | read-only | current | This column indicates the status of the most recent local condition as indicated by the fsElpsPgCmdLocalCondition that occured for this protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.7 | ColumnfsElpsPgCmdFarEndRequest | read-only | current | This column indicates the most recent far-end request received for this protection group through the reception of APS PDU. |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.8 | ColumnfsElpsPgCmdFarEndRequestStatus | read-only | current | This column indicates the status of the most recent far-end request as indicated by the fsElpsPgCmdFarEndRequest object received for this protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.9 | ColumnfsElpsPgCmdActiveRequest | read-only | current | This column indicates the last local request (command or condition) or far end request (received for this protection group through the reception of APS PDU) th… |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.10 | ColumnfsElpsPgCmdSemState | read-only | current | This column shows the current state of the State Event Machine for this protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.11 | ColumnfsElpsPgCmdPgStatus | read-only | current | The object is to indicate the status of the protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.2.1.12 | ColumnfsElpsPgCmdApsPeriodicTime | read-write | current | This column is used to configure the time interval for the periodic transmission of - Protection Switching PDUs, namely, APS PDU for 'vlan' service - Protectio… |
| 1.3.6.1.4.1.10876.101.2.25.3.3 | TablefsElpsPgCfmTable | not-accessible | current | This table contains the configurations related to the monitoring entities for each protection group as denoted by the fsElpsPgConfigPgId object. Currently, fau… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1 | RowfsElpsPgCfmEntry | not-accessible | current | The entry indicating the monitoring entities for each protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.1 | ColumnfsElpsPgCfmWorkingMEG | read-write | current | This refers to the Maintenance Entity Group (MEG) that the working entity of the protection group denoted by fsElpsPgConfigPgId corresponds to. |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.2 | ColumnfsElpsPgCfmWorkingME | read-write | current | This refers to the Maintenance Entity (ME) that the working entity of the protection group denoted by fsElpsPgConfigPgId corresponds to. |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.3 | ColumnfsElpsPgCfmWorkingMEP | read-write | current | This refers to the Maintenance Entity Group (MEG) End Point (MEP) that monitors the working entity of the protection group denoted by the fsElpsPgConfigPgId va… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.4 | ColumnfsElpsPgCfmProtectionMEG | read-write | current | This refers to the Maintenance Entity Group (MEG) that the protection entity of the protection group denoted by fsElpsPgConfigPgId corresponds to. |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.5 | ColumnfsElpsPgCfmProtectionME | read-write | current | This refers to the Maintenance Entity (ME) that the protection entity of the protection group denoted by fsElpsPgConfigPgId corresponds to. |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.6 | ColumnfsElpsPgCfmProtectionMEP | read-write | current | This refers to the Maintenance Entity Group (MEG) End Point (MEP) that monitors the protection entity of the protection group denoted by the fsElpsPgConfigPgId… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.7 | ColumnfsElpsPgCfmRowStatus | read-write | current | The status of this row. The writable columns in any row of this table cannot be changed while the row is active. Furthermore, creation of any entry or modifica… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.8 | ColumnfsElpsPgCfmWorkingReverseMEG | read-write | current | This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Gro… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.9 | ColumnfsElpsPgCfmWorkingReverseME | read-write | current | This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity (ME… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.10 | ColumnfsElpsPgCfmWorkingReverseMEP | read-write | current | This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Gro… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.11 | ColumnfsElpsPgCfmProtectionReverseMEG | read-write | current | This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Gro… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.12 | ColumnfsElpsPgCfmProtectionReverseME | read-write | current | This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity (ME… |
| 1.3.6.1.4.1.10876.101.2.25.3.3.1.13 | ColumnfsElpsPgCfmProtectionReverseMEP | read-write | current | This object is applicable only when the fsElpsPgConfigServiceType is 'mplsLSP'. In case of associated mplsLSP, this object refers to the Maintenance Entity Gro… |
| 1.3.6.1.4.1.10876.101.2.25.3.4 | TablefsElpsPgServiceListTable | not-accessible | current | The protection group service list table contains the list of services that needs to be protected for the corresponding protection group entry. This table needs… |
| 1.3.6.1.4.1.10876.101.2.25.3.4.1 | RowfsElpsPgServiceListEntry | not-accessible | current | The protection group service list table entry. Creation of this entry is allowed only if the value of the object fsElpsPgConfigType is configured as 'list'. |
| 1.3.6.1.4.1.10876.101.2.25.3.4.1.1 | ColumnfsElpsPgServiceListValue | not-accessible | current | This object indicates the services which needs to be protected for this protection group and which will have its traffic shifted from the port indicated by fsE… |
| 1.3.6.1.4.1.10876.101.2.25.3.4.1.2 | ColumnfsElpsPgServiceListRowStatus | read-write | current | The status of this row. The valid options supported for this table are 'createAndGo' and 'destroy'. Entries in this table cannot be created or modified when th… |
| 1.3.6.1.4.1.10876.101.2.25.3.5 | TablefsElpsPgShareTable | not-accessible | current | The protection group share table contains the set of protection groups that share the same protection entity (i.e. protection port). |
| 1.3.6.1.4.1.10876.101.2.25.3.5.1 | RowfsElpsPgShareEntry | not-accessible | current | The protection group share table entry. Each entry indicates a protection group that shares the protection port. |
| 1.3.6.1.4.1.10876.101.2.25.3.5.1.1 | ColumnfsElpsPgShareProtectionPort | not-accessible | current | This object indicates the protection entity (port) which carries the normal traffic upon failure of the working transport entity. |
| 1.3.6.1.4.1.10876.101.2.25.3.5.1.2 | ColumnfsElpsPgSharePgStatus | read-only | current | The object is to indicate the status of the protection group that shares the protection port as indicated by the fsElpsPgConfigProtectionPort object. |
| 1.3.6.1.4.1.10876.101.2.25.3.6 | TablefsElpsPgStatsTable | not-accessible | current | This table contains statistics information for each of the protection groups present in the system. Entries in this table are created implicitly by the creatio… |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1 | RowfsElpsPgStatsEntry | not-accessible | current | The protection group statistics table entry. There is one entry in this table for each entry in the fsElpsPgConfigTable table. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.1 | ColumnfsElpsPgStatsAutoProtectionSwitchCount | read-only | current | This object records the number of times automatic protection switching has happened for this protection group entry. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.2 | ColumnfsElpsPgStatsForcedSwitchCount | read-only | current | This object records the number of times a forced protection switch has happened for this protection group entry. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.3 | ColumnfsElpsPgStatsManualSwitchCount | read-only | current | This object records the number of times a manual protection switch has happened for this protection group entry. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.4 | ColumnfsElpsPgStatsClearStatistics | read-write | current | This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'. This… |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.5 | ColumnfsElpsPgStatsApsPktTxCount | read-only | current | This object records the total number of APS/PSC packets attempted to be transmitted out of this protection group entry. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.6 | ColumnfsElpsPgStatsApsPktRxCount | read-only | current | This object records the total number of APS/PSC packets received by this protection group entry. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.7 | ColumnfsElpsPgStatsApsPktDiscardCount | read-only | current | This object records the total number of APS/PSC packets discarded in this protection group entry. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.8 | ColumnfsElpsPgLRSFRxTime | read-only | current | This object indicates the timestamp when receiving Local Request - signal fail message. This is detected in local node and it is not got from the packet. The t… |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.9 | ColumnfsElpsPgLRSFTxTime | read-only | current | This object indicates the timestamp when sending Local Request - signal fail packet to the peer node. The time is in milliseconds. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.10 | ColumnfsElpsPgFRSFRxTime | read-only | current | This object indicates the timestamp when receiving Far end Request - signal fail packet from the peer node. The time is in milliseconds. |
| 1.3.6.1.4.1.10876.101.2.25.3.6.1.11 | ColumnfsElpsPgStateChgTime | read-only | current | This object indicates the timestamp when the protection path becomes active after processing the signal fail packet that is received from the peer. The time is… |
| 1.3.6.1.4.1.10876.101.2.25.3.7 | TablefsElpsPgServiceListPointerTable | not-accessible | current | The protection group service list pointer table contains the object identifiers for the list of services that needs to be protected and the corresponding the p… |
| 1.3.6.1.4.1.10876.101.2.25.3.7.1 | RowfsElpsPgServiceListPointerEntry | not-accessible | current | The protection group service list pointer table entry. Creation of this entry is allowed only if the value of the object fsElpsPgConfigType is configured as 'l… |
| 1.3.6.1.4.1.10876.101.2.25.3.7.1.1 | ColumnfsElpsPgServiceListId | not-accessible | current | Unique numeric identifier for a working and protection service set in a protection list within the protection group. |
| 1.3.6.1.4.1.10876.101.2.25.3.7.1.2 | ColumnfsElpsPgWorkingServiceListPointer | read-write | current | This object points to a working service which needs to be protected. This object is applicable for 'mplsLSP' and 'mplsPw' service type. When fsElpsPgConfigServ… |
| 1.3.6.1.4.1.10876.101.2.25.3.7.1.3 | ColumnfsElpsPgWorkingReverseServiceListPointer | read-write | current | This object points to the reverse path of the working service that is protected. This object is optional and is applicable only when the forward and resverse p… |
| 1.3.6.1.4.1.10876.101.2.25.3.7.1.4 | ColumnfsElpsPgProtectionServiceListPointer | read-write | current | This object points to the protection service corresponding to the working service. This object is applicable for 'mplsLSP' and 'mplsPw' service types. When fsE… |
| 1.3.6.1.4.1.10876.101.2.25.3.7.1.5 | ColumnfsElpsPgProtectionReverseServiceListPointer | read-write | current | This object points to the reverse path of the protection service. Configuring this object is optional and is applicable only when the forward and resverse path… |
| 1.3.6.1.4.1.10876.101.2.25.3.7.1.6 | ColumnfsElpsPgServiceListPointerRowStatus | read-write | current | The status of this row. Entries in this table cannot be created or modified when the corresponding entry in the protection group config table for this fsElpsPg… |
| 1.3.6.1.4.1.10876.101.2.25.4 | NodefsElpsPgNotifications | |||
| 1.3.6.1.4.1.10876.101.2.25.4.0 | NodefsElpsTraps | |||
| 1.3.6.1.4.1.10876.101.2.25.4.0.1 | NotificationfsElpsProtectionSwitchTrap | current | This trap is generated when the switching happens from working transport entity to protection transport entity (and vice-versa). The generated trap will carry … | |
| 1.3.6.1.4.1.10876.101.2.25.4.0.2 | NotificationfsElpsProtectionSwitchFailureTrap | current | This trap is generated when there is a hardware failure for a protection group or the state machine is unable to transmit APS PDUs upon a protection group stat… | |
| 1.3.6.1.4.1.10876.101.2.25.4.0.3 | NotificationfsElpsProtectionTypeMismatchTrap | current | This trap is generated whenever a mismatch is found through the APS protocol operation. The mismatches can be a B-bit mismatch, a Configuration mismatch, a Lac… | |
| 1.3.6.1.4.1.10876.101.2.25.4.1 | ScalarfsElpsTrapContextName | accessible-for-notify | current | The name given to the virtual context. |
| 1.3.6.1.4.1.10876.101.2.25.4.2 | ScalarfsElpsTrapSwitchingMechanism | accessible-for-notify | current | This object provides the text indicating the mechanism by which the switching of traffic occured from the working to the protection transport entity. 'AutoProt… |
| 1.3.6.1.4.1.10876.101.2.25.4.3 | ScalarfsElpsTrapMismatchType | accessible-for-notify | current | This object provides the text indicating the mismatches found in the APS PDUs exchanged between the near-end and the far-end switches. 'BbitMismatch' will be s… |
| 1.3.6.1.4.1.10876.101.2.25.4.4 | ScalarfsElpsTypeOfFailure | accessible-for-notify | current | This object provides the text indicating a particular failure condition. 'HwProtectionGroupCreationFailed' will be indicated when the setting up of the protect… |
| 1.3.6.1.4.1.10876.101.2.25.5 | NodefsElpsScalars | |||
| 1.3.6.1.4.1.10876.101.2.25.5.1 | ScalarfsElpsStatsOneIsToOneApsPktTxCount | read-only | current | This object records the total number of APS/PSC packets attempted to be transmitted out for 1:1 protection type architecture. |
| 1.3.6.1.4.1.10876.101.2.25.5.2 | ScalarfsElpsStatsOneIsToOneApsPktRxCount | read-only | current | This object records the total number of APS/PSC packets received for 1:1 protection type architecture. |
| 1.3.6.1.4.1.10876.101.2.25.5.3 | ScalarfsElpsStatsOneIsToOneApsPktDiscardCount | read-only | current | This object records the total number of APS/PSC packets discarded for 1:1 protection type architecture. |
| 1.3.6.1.4.1.10876.101.2.25.5.4 | ScalarfsElpsStatsOnePlusOneApsPktTxCount | read-only | current | This object records the total number of APS/PSC packets attempted to be transmitted out for 1+1 protection type architecture. |
| 1.3.6.1.4.1.10876.101.2.25.5.5 | ScalarfsElpsStatsOnePlusOneApsPktRxCount | read-only | current | This object records the total number of APS/PSC packets received for 1+1 protection type architecture. |
| 1.3.6.1.4.1.10876.101.2.25.5.6 | ScalarfsElpsStatsOnePlusOneApsPktDiscardCount | read-only | current | This object records the total number of APS/PSC packets discarded for 1+1 protection type architecture. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PgActiveRequest | INTEGER { localLockOutProtection(0), localForcedSwitchToProtection(1), localSignalFailOnWorking(2), localRecoverSignalFailOnWorking(3), localSignalFailOnProtection(4), localRecoverSignalFailOnProtection(5), localManualSwitchToProtection(6), localManualSwitchToWorking(7), localClear(8), localExercise(9), localWaitToRestoreExpiry(10), farLockOutProtection(11), farSignalFailOnProtection(12), farForceSwitchToProtection(13), farSignalFailOnWorking(14), farManualSwitchToProtection(15), farManualSwitchToWorking(16), farWaitToRestore(17), farExerciseOnWorking(18), farExerciseOnProtection(19), farReverseRequestOnWorking(20), farReverseRequestOnProtection(21), farNoRequestOnWorking(22), farNoRequestOnProtection(23), farDoNotRevert(24) } | current | This textual convention is used to represent the currently active request for a protection group. This includes local requests (commands or conditions) and the far end requests that are received from the peer node throu… |
| PgExtCmd | INTEGER { lockOutProtection(1), forceSwitchToProtection(2), manualSwitchToProtection(3), exercise(4), clear(5), freeze(6), clearFreeze(7), manualSwitchToWorking(8) } | current | This textual convention is used to represent the administrative commands that can be issued to a protection group. The commands 'freeze' and 'clearFreeze' are local (near-end) commands whereas all the other commands are… |
| PgFarEndRequest | INTEGER { lockOutProtection(1), signalFailOnProtection(2), forceSwitchToProtection(3), signalFailOnWorking(4), manualSwitchToProtection(5), waitToRestore(6), exerciseOnWorking(7), exerciseOnProtection(8), reverseRequestOnWorking(9), reverseRequestOnProtection(10), noRequestOnWorking(11), noRequestOnProtection(12), doNotRevert(13), manualSwitchToWorking(14) } | current | This textual convention is used to represent the far-end requests that are received from the peer node that are applicable to the state machine for the protection group. The 'waitToRestore' request is applicable only fo… |
| PgId | Unsigned32 (1..4294967295) | current | An integer that uniquely identifies a Protection Group. This is an administrator defined value. Administrator can give any value for a protection group within the valid range. If a protection group with the same id is a… |
| PgLocalCondition | INTEGER { signalFailOnWorking(1), recoverSignalFailOnWorking(2), signalFailOnProtection(3), recoverSignalFailOnProtection(4), waitToRestoreExpiry(5) } | current | This textual convention is used to represent the local conditions that occur for a protection group. |
| PgMonitorMechanismType | INTEGER { cfm(1), mplsOam(2), none(3) } | current | A value representing the type of monitoring mechanism used to monitor the services (as defined by the PgServiceType object) of the protection group. The value can be one of the following: cfm(1) Using Connectivity Fault… |
| PgSemState | INTEGER { noRequestOnWorking(0), noRequestOnProtection(1), lockOutProtection(2), forceSwitchToProtection(3), signalFailOnWorking(4), signalFailOnProtection(5), manualSwitchToProtection(6), manualSwitchToWorking(7), waitToRestore(8), doNotRevert(9), exerciseOnWorking(10), exerciseOnProtection(11), reverseRequestOnWorking(12), reverseRequestOnProtection(13) } | current | This textual convention is used to represent the various states that are available in the ELPS State Event Machines for each protection group. The 'waitToRestore' state is applicable only for the state machine used in t… |
| PgServiceType | INTEGER { vlan(1), mplsLSP(2), mplsPW(3) } | current | A value representing the type of service to be protected by this protection group. The value can be one of the following: vlan(1) - IEEE802.1Q VLAN mplsLSP(2) - MPLS Label Switched Path (LSP) mplsPW(3) - MPLS Pseudowire… |
| PgServiceValue | Unsigned32 (1..4294967295) | current | An integer that uniquely identifies a service. A PgServiceValue value (service identifier) is always interpreted within the context of an PgServiceType value. Every usage of the PgServiceValue textual convention is requ… |
| PgServiceValueOrNone | Unsigned32 (0 | 1..4294967295) | current | An integer that uniquely identifies a service. A PgServiceValue value is always interpreted within the context of an PgServiceType value. Every usage of the PgServiceValue textual convention is required to specify the P… |
| PgStatus | INTEGER { protectionDisabled(0), workingPathActive(1), protectionPathActive(2), waitToRestoreState(3), holdOffState(4), switchingFailed(5), unavailable(6), doNotRevert(7) } | current | This textual convention is used to represent the current status of the protection group. If the value is 'protectionDisabled(0)', then this means that the rowstatus of the protection group entry is not in active state. … |
| PgType | INTEGER { individual(1), list(2), all(3) } | current | A value representing the type of the protection group. The value can be one of the following: individual(1) - If protection group is to protect a single service. list(2) - If protection group is to protect a list of ser… |