SUPERMICRO-ERPS-MIB
161 objects
This MIB is a proprietary MIB for ERPS to provide ethernet ring protection switching as per ITU-T G.8032/Y.1344 and ITU-T G.8032/Y.1344 Amendment I (04/2009)
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmMepId |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| SUPERMICROQ-BRIDGE-MIB | VlanId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.40 | IdentityfsErpsMIB | This MIB is a proprietary MIB for ERPS to provide ethernet ring protection switching as per ITU-T G.8032/Y.1344 and ITU-T G.8032/Y.1344 Amendment I (04/2009) | ||
| 1.3.6.1.4.1.10876.101.2.40.1 | NodefsErpsContext | |||
| 1.3.6.1.4.1.10876.101.2.40.1.1 | TablefsErpsContextTable | not-accessible | current | Table of ERPS module parameters per ERPS Virtual Context. |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1 | RowfsErpsContextEntry | not-accessible | current | This entry contains virtual context specific ERPS module parameters. |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.1 | ColumnfsErpsContextId | not-accessible | current | Context identifier used to distinguish between the multiple virtual bridge contexts within a bridge. |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.2 | ColumnfsErpsCtxtName | read-only | current | This object gives the context-name for this virtual context. |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.3 | ColumnfsErpsCtxtSystemControl | read-write | current | The administrative shutdown status requested by management for the ERPS feature. When set to 'start(1)', ERPS module will be started in this context and the mo… |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.4 | ColumnfsErpsCtxtModuleStatus | read-write | current | The administrative status requested by management for the ERPS feature. When set to 'enable(1)', ERPS module will be enabled in this context and ERPS protocol … |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.5 | ColumnfsErpsCtxtTraceInput | read-write | current | This object stores the trace option string input given by the user. To enable or disable particular trace, the user has to enter the corresponding string(given… |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.6 | ColumnfsErpsCtxtTrapStatus | read-write | current | This object is used to enable or disable the TRAP notification. The value 'enable (1)' indicates that the ERPS will send notifications. The value 'disable (2)'… |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.7 | ColumnfsErpsCtxtClearRingStats | read-write | current | This object is used to clear statistics counters for all rings in this context. When set to true(1), statistics counters for all rings in this context will be … |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.8 | ColumnfsErpsCtxtRowStatus | read-write | current | Row status for the ring context entry. An entry can be created in this table, only when the corresponding virtual context is created in the system. Only 'creat… |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.9 | ColumnfsErpsCtxtVlanGroupManager | read-write | current | This object identifies the module that manages the grouping of vlans in this virtual context. mstp(1) - MSTP(Multiple Spanning Tree Protocol) module manages th… |
| 1.3.6.1.4.1.10876.101.2.40.1.1.1.10 | ColumnfsErpsCtxtProprietaryClearFS | read-write | current | This object is used to enable or disable the ERPS proprietary implementation. The value 'true (1)' indicates that the ERPS proprietary implementation will over… |
| 1.3.6.1.4.1.10876.101.2.40.1.2 | TablefsErpsVlanGroupTable | not-accessible | current | This table is used configure the grouping of set of vlans. This table can be accessed only if fsErpsCtxtVlanGroupManager object is set to 'erps'. By default a … |
| 1.3.6.1.4.1.10876.101.2.40.1.2.1 | RowfsErpsVlanGroupEntry | not-accessible | current | This entry contains vlan id, group/list/instance Id and status of that vlan. |
| 1.3.6.1.4.1.10876.101.2.40.1.2.1.1 | ColumnfsErpsVlanId | not-accessible | current | This is the vlan id which is mapped to this group. |
| 1.3.6.1.4.1.10876.101.2.40.1.2.1.2 | ColumnfsErpsVlanGroupId | not-accessible | current | This is the vlan group identifier. A group can contain multiple vlans, but one vlan cannot be part of multiple groups. It is similar to the MSTP Instance mappe… |
| 1.3.6.1.4.1.10876.101.2.40.1.2.1.3 | ColumnfsErpsVlanGroupRowStatus | read-write | current | This denotes the row status for this table. Only 'CreateAndGo' and 'destroy' values are allowed for this object. 'CreateAndWait' and 'notInService' values are … |
| 1.3.6.1.4.1.10876.101.2.40.2 | NodefsErpsRing | |||
| 1.3.6.1.4.1.10876.101.2.40.2.1 | TablefsErpsRingTable | not-accessible | current | The table for creating and configuring the ring entries. Each entry has information about one ring in the switch. |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1 | RowfsErpsRingEntry | not-accessible | current | The ring table entry, each entry in this table contains the attributes which define a ring. |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.1 | ColumnfsErpsRingId | not-accessible | current | Unique numeric identifier of a ring within the context for administrative purposes. In service based protection mode(Multiple ERP instances), this object repre… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.2 | ColumnfsErpsRingVlanId | read-write | current | This object identifies the dedicated VLAN Id used by a ring for its R-APS messages communication. It is recommended that the, * R-APS VLANs should be used only… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.3 | ColumnfsErpsRingName | read-write | current | This object indicates the name of the ring. By default, the ring name will be constructed by appending ring ID to the string 'ring'. Example: Default ring name… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.4 | ColumnfsErpsRingPort1 | read-write | current | First port of the two ring ports participating in the ring. Any interface with valid interface ID can be configured as a ring port. |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.5 | ColumnfsErpsRingPort2 | read-write | current | Second port of the two ring ports participating in the ring. Any interface with valid interface ID can be configured as a ring port. On the interconnected node… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.6 | ColumnfsErpsRingRplPort | read-write | current | This object identifies the RPL port of the ring. Valid values for this object are '0', 'IfIndex of fsErpsRingPort1' and 'IfIndex of fsErpsRingPort2'. When a po… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.7 | ColumnfsErpsRingPortBlockingOnVcRecovery | read-write | current | This object is applicable for the interconnected nodes of a sub-ring. This configuration helps to avoid the possibility of temporary loops getting formed in th… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.8 | ColumnfsErpsRingNodeType | read-only | current | This object identifies the node state of this ring node. If fsErpsRingRplPort is configured for a ring node, then that ring node becomes 'rplOwner', otherwise … |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.9 | ColumnfsErpsRingOperatingMode | read-write | current | This object identifies whether the ring is operating in revertive or nonRevertive manner. In revertive mode of operation, once the failed link recovers, the da… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.10 | ColumnfsErpsRingMonitorMechanism | read-write | current | This object indicates the type of monitoring mechanism used for detecting faults of the ring link. Currently 'cfm' and 'MPLS OAM' is supported as monitoring me… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.11 | ColumnfsErpsRingPort1Status | read-only | current | This object indicates ring port1's current status updated by ERPS control process of this ring. If the status is blocked then: - Data traffic will be blocked o… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.12 | ColumnfsErpsRingPort2Status | read-only | current | This object indicates ring port2's current status updated by ERPS control process of this ring. If the status is blocked then: - Data traffic will be blocked o… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.13 | ColumnfsErpsRingSemState | read-only | current | This object gives the node state as per the G.8032 state event machine. When ring Row status is not active or when ERPS is disabled in the virtual context, thi… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.14 | ColumnfsErpsRingNodeStatus | read-only | current | A 32 bit mask giving the current status of the ring by specifying the events/status currently present. Bit 1 - Signal-failure on Ring Port 1 Bit 2 - Signal-fai… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.15 | ColumnfsErpsRingRowStatus | read-write | current | Row status of the ring entry. Entries in this table can be modified by setting the RowStatus as NOT_IN_SERVICE. This RowStatus can be made active only if: - fs… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.16 | ColumnfsErpsRingMacId | read-write | current | This object represents the id of the ring instance to be communicated via R-APS PDUs to other ring nodes. For this ring instance, the value of this object form… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.17 | ColumnfsErpsRingProtectedVlanGroupId | read-write | current | This object identifies the vlan group associated with this ring instance. If VlanGroupManager is 'mstp', then this object identifies the Mstp Instance Id. Othe… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.18 | ColumnfsErpsRingProtectionType | read-write | current | This object specifies the type of protection being provided by this ring instance. The following two protection switching types are possible: portBased - Port … |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.19 | ColumnfsErpsRingRAPSCompatibleVersion | read-write | current | This is used to configure the compatible version number of the node in the ring. The default value is version2 (2).[Reference : Section 10.1.13 Backward compat… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.20 | ColumnfsErpsRingRplNeighbourPort | read-write | current | This object identifies the RPL Neighbour port of the ring . Valid values for this object are '0', 'IfIndex of fsErpsRingPort1' and 'IfIndex of fsErpsRingPort2'… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.21 | ColumnfsErpsRingRAPSSubRingWithoutVC | read-write | current | This configuration helps to configure the sub-ring to run with or without an RAPS Virtual Channel. When this object is set to 'false',the sub-ring is configure… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.22 | ColumnfsErpsRingRplNextNeighbourPort | read-write | current | This object identifies the RPL Next Neighbour port of the ring. Valid values for this object are '0', 'IfIndex of fsErpsRingPort1' and 'IfIndex of fsErpsRingPo… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.23 | ColumnfsErpsRingPort1NodeID | read-only | current | This object indicates the Node ID of the Last R-APS PDU received on ring port 1. This object is used for the Flush Logic feature mentioned in Section 10.1.10 o… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.24 | ColumnfsErpsRingPort2NodeID | read-only | current | This object indicates the Node ID of the Last R-APS PDU received on ring port 2. This object is used for the Flush Logic feature mentioned in Section 10.1.10 o… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.25 | ColumnfsErpsRingPort1BPRBitVal | read-only | current | This object indicates the Blocked Port Reference (BPR bit) status of the Last R-APS PDU Received on ring port 1. This object is used for the Flush Logic featur… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.26 | ColumnfsErpsRingPort2BPRBitVal | read-only | current | This object indicates the Blocked Port Reference (BPR bit) status of the Last R-APS PDU Received on ring port 2. This object is used for the Flush Logic featur… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.27 | ColumnfsErpsRingProtectedVlanGroupList | read-write | current | This object indicates the list of VLAN groups mapped to the ring entry. If the ring is running in portBased protection mode then this object will not have any … |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.28 | ColumnfsErpsRingServiceType | read-write | current | This object indicates the service on which protection is provided for this ring. The following service types are provided. - vlan(1) - mplsLSP(2) - mplsPW(3) -… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.29 | ColumnfsErpsRingPort1SubPortList | read-write | current | This object specifies the list of interfaces to which R-APS service can be extended, without actually running R-APS. An interface identified in this fsErpsRing… |
| 1.3.6.1.4.1.10876.101.2.40.2.1.1.30 | ColumnfsErpsRingPort2SubPortList | read-write | current | This object specifies the list of interfaces to which R-APS support is extended, without actually running R-APS. An interface identified in this fsErpsRingPort… |
| 1.3.6.1.4.1.10876.101.2.40.2.2 | TablefsErpsRingCfmTable | not-accessible | current | This table contains the configurations related to the monitoring entities of the ring entry in the fsErpsRingTable. Currently, fault monitoring using the Y.173… |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1 | RowfsErpsRingCfmEntry | not-accessible | current | The entry indicates the monitoring entities for each ring entry. |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1.1 | ColumnfsErpsRingMEG1 | read-write | current | This refers to the Maintenance Entity Group of fsErpsRingPort1. Internally this object will refer to mib object dot1agCfmMdIndex of ECFM 802.1ag std. Both the … |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1.2 | ColumnfsErpsRingCfmME1 | read-write | current | This refers to the Maintenance Entity (ME) of the fsErpsRingPort1. Internally this object will refer to mib object dot1agCfmMaIndex of ECFM 802.1ag std. This c… |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1.3 | ColumnfsErpsRingCfmMEP1 | read-write | current | This refers to the MEP ID that monitors the ring port fsErpsRingPort1 in R-APS VLAN of the ring. This MEP needs to be down MEP. |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1.4 | ColumnfsErpsRingMEG2 | read-write | current | This refers to the Maintenance Entity Group of fsErpsRingPort2. Internally this object will refer to mib object dot1agCfmMdIndex of ECFM 802.1ag std. Both the … |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1.5 | ColumnfsErpsRingCfmME2 | read-write | current | This refers to the Maintenance Entity (ME) of the fsErpsRingPort2. Internally this object will refer to mib object dot1agCfmMaIndex of ECFM 802.1ag std. This c… |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1.6 | ColumnfsErpsRingCfmMEP2 | read-write | current | This refers to the MEP ID that monitors the ring port fsErpsRingPort2 in R-APS VLAN of the ring. This MEP needs to be down MEP. In the interconnecting node of … |
| 1.3.6.1.4.1.10876.101.2.40.2.2.1.7 | ColumnfsErpsRingCfmRowStatus | read-write | current | Denotes the Row Status of the Ring CFM Entry. Creation or modification of any entry in this table is allowed, only when the corresponding ring entry is created… |
| 1.3.6.1.4.1.10876.101.2.40.2.3 | TablefsErpsRingConfigTable | not-accessible | current | The Ring configuration table. Each entry in this table corresponds to a configured ring entry in fsErpsRingTable. Entry in this table is implicitly created, wh… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1 | RowfsErpsRingConfigEntry | not-accessible | current | Each entry in this table contains optional configurations and commands for the corresponding ring entry. Objects in this entry can be changed, even when the co… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.1 | ColumnfsErpsRingConfigHoldOffTime | read-write | current | This object is used to configure the period for the hold-off timer of this ring. Hold-Off timer will be started when a new defect (SF) is received for this rin… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.2 | ColumnfsErpsRingConfigGuardTime | read-write | current | This object is used to configure the period for the guard timer of this ring. This timer is required to prevent reception of outdated R-APS messages. Guard tim… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.3 | ColumnfsErpsRingConfigWTRTime | read-write | current | This object is used to configure the period for the Wait to restore timer. This object is applicable, only if this ring is operating in the revertive mode of o… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.4 | ColumnfsErpsRingConfigPeriodicTime | read-write | current | This object is used to configure the periodic timer. Periodic timer is used to configure the transmission interval of R-APS PDUs. Periodic timer is not valid f… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.5 | ColumnfsErpsRingConfigSwitchPort | read-write | current | This object identifies the port that will be blocked by enforcing Forced or Manual Switching command. Port configured here should be one among the fsErpsRingPo… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.6 | ColumnfsErpsRingConfigSwitchCmd | read-write | current | Before configuring this object with (forceSwitch) or (manualSwitch), fsErpsRingConfigSwitchPort must be configured. When ForcedSwitch is enabled on a ring, irr… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.7 | ColumnfsErpsRingConfigRecoveryMethod | read-write | current | This object is valid, only when the operating mode for the ring is nonRevertive. This object will not have any impact when the ring is operating in revertive m… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.8 | ColumnfsErpsRingConfigPropagateTC | read-write | current | This object is used to enable/disable the propagation of TC in the associated rings, whenever the flush FDB is triggered for this sub-ring. This configuration … |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.9 | ColumnfsErpsRingConfigWTBTime | read-write | current | This object is used to configure the period for Wait to Block timer. This object is effective, only when Force switch or Manual switch is configured in the rin… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.10 | ColumnfsErpsRingConfigClear | read-write | current | The purpose of this object is described below : a) Clearing the forced switch in the ring. b) Clearing the manual switch in the ring. c) Trigger reversion befo… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.11 | ColumnfsErpsRingConfigInterConnNode | read-write | current | This object is configured in interconnection node of the sub-ring to support the feature 'Minimizing segmentation in interconnected rings' as per Appendix X of… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.12 | ColumnfsErpsRingConfigMultipleFailure | read-write | current | This object is configured in interconnection node of the sub-ring to support the feature 'Minimizing segmentation in interconnected rings' as per Appendix X of… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.13 | ColumnfsErpsRingConfigIsPort1Present | read-write | current | This object identifies the presence of port1 of the ring in the line card. This object should be configured as 'remote' only if the ports are distributed acros… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.14 | ColumnfsErpsRingConfigIsPort2Present | read-write | current | This object identifies the presence of port2 of the ring in the line card. This object should be configured as 'remote' only if the ports are distributed acros… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.15 | ColumnfsErpsRingConfigInfoDistributingPort | read-write | current | This object is used in Distributed ERPS to synchronize the ring information between local and remote line cards. The MEP's installed on this distributing port … |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.16 | ColumnfsErpsRingConfigKValue | read-write | current | This object is used to configure with integer value which is used for running the timer interval of periodic multiplied by this value to raise a TFOP defect wh… |
| 1.3.6.1.4.1.10876.101.2.40.2.3.1.17 | ColumnfsErpsRingConfigFailureOfProtocol | read-write | current | This object is used to enable or disable the Failure Of Protocol feature. The value 'true (1)' indicates that TFOP feature is enabled to raise the TRAP when 1.… |
| 1.3.6.1.4.1.10876.101.2.40.2.4 | TablefsErpsRingTcPropTable | not-accessible | current | This table is used to configure the list of rings, where Topology Change (TC) has to be propagated, whenever there is a FDB flush condition in the sub-ring. Th… |
| 1.3.6.1.4.1.10876.101.2.40.2.4.1 | RowfsErpsRingTcPropEntry | not-accessible | current | Each entry in this table identifies the ring to which TC needs to be propagated upon FDB flush condition in the sub-ring. When TC propagation is enabled for a … |
| 1.3.6.1.4.1.10876.101.2.40.2.4.1.1 | ColumnfsErpsRingTcPropRingId | not-accessible | current | This object identifies the ring ID to which TC needs to be propagated upon FDB flush condition in the sub-ring identified by 'fsErpsRingId'. This object value … |
| 1.3.6.1.4.1.10876.101.2.40.2.4.1.2 | ColumnfsErpsRingTcPropRowStatus | read-write | current | Denotes the Row Status for TC Propagation table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. 'CreateAndWait' and 'notInService' … |
| 1.3.6.1.4.1.10876.101.2.40.2.5 | TablefsErpsRingConfigExtTable | not-accessible | current | The Ring configuration Extension table. Each entry in this table corresponds to a configured ring entry in fsErpsRingTable. Entry in this table is implicitly c… |
| 1.3.6.1.4.1.10876.101.2.40.2.5.1 | RowfsErpsRingConfigExtEntry | not-accessible | current | Each entry in this table contains optional configurations and commands for the corresponding ring entry. Objects in this entry can be changed, even when the co… |
| 1.3.6.1.4.1.10876.101.2.40.2.5.1.1 | ColumnfsErpsRingConfigExtVCRecoveryPeriodicTime | read-write | current | This object is used to configure the time interval for which the periodic timer needs to be restarted, when the corresponding main ring indicates the virtual c… |
| 1.3.6.1.4.1.10876.101.2.40.2.5.1.2 | ColumnfsErpsRingConfigExtMainRingId | read-write | current | This object identifies ID of the main Ring to which the sub-ring is connected. Upon configuration, this sub-ring will get added to the sub-ring list maintained… |
| 1.3.6.1.4.1.10876.101.2.40.3 | NodefsErpsStats | |||
| 1.3.6.1.4.1.10876.101.2.40.3.1 | ScalarfsErpsMemFailCount | read-only | current | This object identifies number of times Memory allocation failure occurred in the ERPS module. |
| 1.3.6.1.4.1.10876.101.2.40.3.2 | ScalarfsErpsBufFailCount | read-only | current | This object identifies number of times Buffer related failure occurred in the ERPS module. |
| 1.3.6.1.4.1.10876.101.2.40.3.3 | ScalarfsErpsTimerFailCount | read-only | current | This object identifies number of times Timer related failure occurred in the ERPS module. |
| 1.3.6.1.4.1.10876.101.2.40.3.4 | TablefsErpsRingStatsTable | not-accessible | current | This table contains statistics information for each of the ring present in the system. Entries in this table are created implicitly by the creation of entries … |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1 | RowfsErpsRingStatsEntry | not-accessible | current | There is one entry in this table for each entry in the fsErpsRingTable. Each entry contains the statistics for both ring ports. For a sub-ring in an interconne… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.1 | ColumnfsErpsRingClearRingStats | read-write | current | This object is used to clear statistics counters for this ring. When set to true(1), statistics counters for this ring will be cleared. When set to false(2), n… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.2 | ColumnfsErpsRingPort1RapsPduSentCount | read-only | current | This object indicates the number of valid R-APS PDUs sent on the fsErpsRingPort1 of the ring. R-APS PDUs include all types like R-APS(SF), R-APS(NR) & R-APS (N… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.3 | ColumnfsErpsRingPort2RapsPduSentCount | read-only | current | This object indicates the number of valid R-APS PDUs sent on the fsErpsRingPort2 of the ring. R-APS PDUs include all types like R-APS(SF), R-APS(NR) & R-APS (N… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.4 | ColumnfsErpsRingPort1RapsPduRcvdCount | read-only | current | This object indicates the number of valid R-APS PDUs received on the fsErpsRingPort1 of the ring. R-APS PDUs include all types like R-APS(SF), R-APS(NR) & R-AP… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.5 | ColumnfsErpsRingPort2RapsPduRcvdCount | read-only | current | This object indicates the number of valid R-APS PDUs received on the fsErpsRingPort2 of the ring. R-APS PDUs include all types like R-APS(SF), R-APS(NR) & R-AP… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.6 | ColumnfsErpsRingPort1RapsPduDiscardCount | read-only | current | This object indicates the number of R-APS PDUs discarded on the fsErpsRingPort1 of the ring. R-APS PDUs include all types like R-APS(SF), R-APS(NR) & R-APS (NR… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.7 | ColumnfsErpsRingPort2RapsPduDiscardCount | read-only | current | This object indicates the number of R-APS PDUs discarded on the fsErpsRingPort2 of the ring. R-APS PDUs include all types like R-APS(SF), R-APS(NR) & R-APS (NR… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.8 | ColumnfsErpsRingPort1BlockedCount | read-only | current | This object indicates the number times the fsErpsRingPort1 is blocked. A port might be blocked because of local failure, or because of link configured as RPL, … |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.9 | ColumnfsErpsRingPort2BlockedCount | read-only | current | This object indicates the number times the fsErpsRingPort2 is blocked. A port might be blocked because of local failure, or because of link configured as RPL, … |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.10 | ColumnfsErpsRingPort1UnblockedCount | read-only | current | This object indicates the number times the fsErpsRingPort1 is unblocked. A port might be unblocked because of recovery from local failure, or if the link is co… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.11 | ColumnfsErpsRingPort2UnblockedCount | read-only | current | This object indicates the number times the fsErpsRingPort2 is unblocked. A port might be unblocked because of recovery from local failure, or if the link is co… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.12 | ColumnfsErpsRingPort1FailedCount | read-only | current | This object indicates the number of times the fsErpsRingPort1 failed because of local SF condition. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.13 | ColumnfsErpsRingPort2FailedCount | read-only | current | This object indicates the number of times the fsErpsRingPort2 failed because of local SF condition. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.14 | ColumnfsErpsRingPort1RecoveredCount | read-only | current | This object indicates the number of times the fsErpsRingPort1 recovered from a failure (local clear SF condition). |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.15 | ColumnfsErpsRingPort2RecoveredCount | read-only | current | This object indicates the number of times the fsErpsRingPort2 recovered from a failure (local clear SF condition). |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.16 | ColumnfsErpsRingPort1VersionDiscardCount | read-only | current | This object indicates the number of R-APS PDUs discarded on the fsErpsRingPort1 of the ring due to version mismatch. The version discard count increments in th… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.17 | ColumnfsErpsRingPort2VersionDiscardCount | read-only | current | This object indicates the number of R-APS PDUs discarded on the fsErpsRingPort2 of the ring due to version mismatch. The version discard count increments in th… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.18 | ColumnfsErpsRingPort1RapsFSPduRxCount | read-only | current | This object indicates the number of R-APS (FS) PDUs received on the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.19 | ColumnfsErpsRingPort1RapsFSPduTxCount | read-only | current | This object indicates the number of R-APS (FS) PDUs sent from the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.20 | ColumnfsErpsRingPort2RapsFSPduRxCount | read-only | current | This object indicates the number of R-APS (FS) PDUs received on the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.21 | ColumnfsErpsRingPort2RapsFSPduTxCount | read-only | current | This object indicates the number of R-APS (FS) PDUs sent from the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.22 | ColumnfsErpsRingPort1RapsMSPduRxCount | read-only | current | This object indicates the number of R-APS (MS) PDUs received on the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.23 | ColumnfsErpsRingPort1RapsMSPduTxCount | read-only | current | This object indicates the number of R-APS (MS) PDUs sent from the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.24 | ColumnfsErpsRingPort2RapsMSPduRxCount | read-only | current | This object indicates the number of R-APS (MS) PDUs received on the fsErpsRingPort2 of the ring . The RapsMSPduRx count increments only if the R-APS(MS)is reci… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.25 | ColumnfsErpsRingPort2RapsMSPduTxCount | read-only | current | This object indicates the number of R-APS (MS) PDUs sent from the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.26 | ColumnfsErpsRingPort1RapsEventPduRxCount | read-only | current | This object indicates the number of R-APS (Event) PDUs received on the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.27 | ColumnfsErpsRingPort1RapsEventPduTxCount | read-only | current | This object indicates the number of R-APS (Event) PDUs sent from the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.28 | ColumnfsErpsRingPort2RapsEventPduRxCount | read-only | current | This object indicates the number of R-APS (MS) PDUs received on the fsErpsRingPort2 of the ring . The RapsEventPduRx count increments only if the R-APS(Event)i… |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.29 | ColumnfsErpsRingPort2RapsEventPduTxCount | read-only | current | This object indicates the number of R-APS (Event) PDUs sent from the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.30 | ColumnfsErpsRingPort1RapsSFPduRxCount | read-only | current | This object indicates the number of R-APS (SF) PDUs received on the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.31 | ColumnfsErpsRingPort1RapsSFPduTxCount | read-only | current | This object indicates the number of R-APS (SF) PDUs sent from the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.32 | ColumnfsErpsRingPort2RapsSFPduRxCount | read-only | current | This object indicates the number of R-APS (SF) PDUs received on the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.33 | ColumnfsErpsRingPort2RapsSFPduTxCount | read-only | current | This object indicates the number of R-APS (SF) PDUs sent from the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.34 | ColumnfsErpsRingPort1RapsNRPduRxCount | read-only | current | This object indicates the number of R-APS (NR) PDUs received on the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.35 | ColumnfsErpsRingPort1RapsNRPduTxCount | read-only | current | This object indicates the number of R-APS (NR) PDUs sent from the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.36 | ColumnfsErpsRingPort2RapsNRPduRxCount | read-only | current | This object indicates the number of R-APS (NR) PDUs received on the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.37 | ColumnfsErpsRingPort2RapsNRPduTxCount | read-only | current | This object indicates the number of R-APS (NR) PDUs sent from the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.38 | ColumnfsErpsRingPort1RapsNRRBPduRxCount | read-only | current | This object indicates the number of R-APS (NRRB) PDUs received on the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.39 | ColumnfsErpsRingPort1RapsNRRBPduTxCount | read-only | current | This object indicates the number of R-APS (NRRB) PDUs sent from the fsErpsRingPort1 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.40 | ColumnfsErpsRingPort2RapsNRRBPduRxCount | read-only | current | This object indicates the number of R-APS (NRRB) PDUs received on the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.41 | ColumnfsErpsRingPort2RapsNRRBPduTxCount | read-only | current | This object indicates the number of R-APS (NRRB) PDUs sent from the fsErpsRingPort2 of the ring . |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.42 | ColumnfsErpsRingGeneratedTrapsCount | read-only | current | This object indicates the number of trap messages send from a ring node. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.43 | ColumnfsErpsRingPort1DefectEncTimeSec | read-only | current | This object indicates the time when the defect occurred for port1 of the ring and returns time in seconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.44 | ColumnfsErpsRingPort2DefectEncTimeSec | read-only | current | This object indicates the time when the defect occurred for port2 of the ring and returns time in seconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.45 | ColumnfsErpsRingPort1DefectClearedTimeSec | read-only | current | This object indicates the time when the defect cleared for port1 of the ring and returns time in seconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.46 | ColumnfsErpsRingPort2DefectClearedTimeSec | read-only | current | This object indicates the time when the defect cleared for port2 of the ring and returns time in seconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.47 | ColumnfsErpsRingRplPortStatChgTimeSec | read-only | current | This object indicates the time when Rpl Port status change for the ring and returns time in milliseconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.48 | ColumnfsErpsRingRplNbrPortStatChgTime | read-only | current | This object indicates the time when Rpl Neighbor Port status change for the ring and returns time in milliseconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.49 | ColumnfsErpsRingDistPortPduRxCount | read-only | current | This object indicates the number of Dynamic sync PDUs received on the fsErpsRingConfigInfoDistributingPort of the ring. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.50 | ColumnfsErpsRingDistPortPduTxCount | read-only | current | This object indicates the number of Dynamic sync PDUs send from the fsErpsRingConfigInfoDistributingPort of the ring. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.51 | ColumnfsErpsRingRapsPort1DefectEncTimeNSec | read-only | current | This object indicates the time in nano seconds when the defect occurred on port1 of the ring. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.52 | ColumnfsErpsRingRapsPort1DefectClearedTimeNSec | read-only | current | This object indicates the time in nano seconds when the defect cleared occurred on port1 of the ring. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.53 | ColumnfsErpsRingRapsPort2DefectEncTimeNSec | read-only | current | This object indicates the time in nano seconds when the defect occurred on port2 of the ring. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.54 | ColumnfsErpsRingRapsPort2DefectClearedTimeNSec | read-only | current | This object indicates the time in nano seconds when the defect cleared occurred on port2 of the ring. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.55 | ColumnfsErpsRingRapsRplPortStatChgTimeNSec | read-only | current | This object indicates the time when Rpl Port status change for the ring and returns time in nanoseconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.56 | ColumnfsErpsRingDefectSwitchOverTimeMSec | read-only | current | This object indicates the differences of the switch over time in milliseconds. |
| 1.3.6.1.4.1.10876.101.2.40.3.4.1.57 | ColumnfsErpsRingDefectClearedSwitchOverTimeMSec | read-only | current | This object indicates the differences of the switch over time in milliseconds. |
| 1.3.6.1.4.1.10876.101.2.40.4 | NodefsErpsNotifications | |||
| 1.3.6.1.4.1.10876.101.2.40.4.0 | NodefsErpsTraps | |||
| 1.3.6.1.4.1.10876.101.2.40.4.0.1 | NotificationfsErpsStateChangeTrap | current | This trap is generated on the following events: - Local SF is received for the ring (Auto Trap). - Local Clear SF is received for the ring (Auto Trap). - Remot… | |
| 1.3.6.1.4.1.10876.101.2.40.4.0.2 | NotificationfsErpsFailureTrap | current | This trap is generated when there is any failure on a ring. | |
| 1.3.6.1.4.1.10876.101.2.40.4.1 | ScalarfsErpsTypeOfFailure | accessible-for-notify | current | This object provides the text indicating a particular failure condition. 'R-APSPduTxFailure' will be set, when the state machine is unable to transmit an R-APS… |
| 1.3.6.1.4.1.10876.101.2.40.4.2 | ScalarfsErpsTrapSwitchingMechanism | accessible-for-notify | current | This object indicates the type of switching that is currently active 'AutoSwitch' will be set, when the switching happens automatically through the operation o… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RingId | Unsigned32 (1..4294967295) | current | Ring identifier used to identify a ring protection group. |
| RingIdOrNone | Unsigned32 (0 | 1..4294967295) | current | The Ring identifier that uniquely identifies a specific ring protection group,or no ring. The special value of zero is used to indicate that no ring is present or used. This can be used in any situation where an object … |
| RingMonitorMechanismType | INTEGER { cfm(1),mplsOam(2) } | current | Object represents the type of monitoring mechanism used to monitor a Ring Entry. The value can be one of the following: cfm(1) Using Connectivity Fault Management via OAM functions and mechanisms for Ethernet based netw… |
| RingServiceType | INTEGER { vlan(1), mplsLSP(2), mplsPW(3), mplsLSPPW(4) } | current | A value representing the type of service to be protected by this ring group. The value can be one of the following: vlan(1) - IEEE802.1Q VLAN mplsLSP(2) - MPLS Label Switched Path (LSP) mplsPW(3) - MPLS Pseudowire. Righ… |