SUPERMICRO-MISTDOSPFV3-MIB
181 objects
The Proprietary MI STD OSPF3 MIB modified from STD OSPF3 MIB
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| OSPF-MIB | AreaID BigMetric DesignatedRouterPriority HelloRange Metric RouterID Status |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.2.23 | IdentityfsMIStdOspfv3 | The Proprietary MI STD OSPF3 MIB modified from STD OSPF3 MIB | ||
| 1.3.6.1.4.1.10876.101.2.23.1 | NodefsMIStdOspfv3Objects | |||
| 1.3.6.1.4.1.10876.101.2.23.1.1 | TablefsMIStdOspfv3Table | not-accessible | current | Information describing the parameters of router's instances |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1 | RowfsMIStdOspfv3Entry | not-accessible | current | Information describing the parameters of one of the router's instances |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.1 | ColumnfsMIStdOspfv3ContextId | not-accessible | current | A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized durin… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.2 | ColumnfsMIStdOspfv3RouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 inte… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.3 | ColumnfsMIStdOspfv3AdminStat | read-write | current | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disabl… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.4 | ColumnfsMIStdOspfv3VersionNumber | read-only | current | The version number of OSPF for IPv6 is 3. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.5 | ColumnfsMIStdOspfv3AreaBdrRtrStatus | read-only | current | A flag to note whether this router is an area border router. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.6 | ColumnfsMIStdOspfv3ASBdrRtrStatus | read-write | current | A flag to note whether this router is config- ured as an Autonomous System border router. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.7 | ColumnfsMIStdOspfv3AsScopeLsaCount | read-only | current | The number of AS-Scope (e.g. AS-External) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.8 | ColumnfsMIStdOspfv3AsScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the AS-scoped link-state advertisements con- tained in the link-state database. This sum can be used to determin… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.9 | ColumnfsMIStdOspfv3OriginateNewLsas | read-only | current | The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.10 | ColumnfsMIStdOspfv3RxNewLsas | read-only | current | The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated … |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.11 | ColumnfsMIStdOspfv3ExtLsaCount | read-only | current | The number of External(LS type 0x4005) in the link- state database |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.12 | ColumnfsMIStdOspfv3ExtAreaLsdbLimit | read-write | current | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.13 | ColumnfsMIStdOspfv3MulticastExtensions | read-write | current | A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. If intra… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.14 | ColumnfsMIStdOspfv3ExitOverflowInterval | read-write | current | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.15 | ColumnfsMIStdOspfv3DemandExtensions | read-write | current | The router's support for demand routing. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.16 | ColumnfsMIStdOspfv3TrafficEngineeringSupport | read-write | current | The router's support for traffic engineering extensions. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.17 | ColumnfsMIStdOspfv3ReferenceBandwidth | read-write | current | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.18 | ColumnfsMIStdOspfv3RestartSupport | read-write | current | The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.19 | ColumnfsMIStdOspfv3RestartInterval | read-write | current | Configured OSPF hitless restart timeout interval. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.20 | ColumnfsMIStdOspfv3RestartStatus | read-only | current | Current status of OSPF hitless restart. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.21 | ColumnfsMIStdOspfv3RestartAge | read-only | current | Remaining time in current OSPF hitless restart interval. |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.22 | ColumnfsMIStdOspfv3RestartExitReason | read-only | current | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a rest… |
| 1.3.6.1.4.1.10876.101.2.23.1.1.1.23 | ColumnfsMIStdOspfv3Status | read-write | current | This variable displays the status of the en- try. The internal effect (row removal) is implementation dependent. |
| 1.3.6.1.4.1.10876.101.2.23.1.2 | TablefsMIStdOspfv3AreaTable | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1 | RowfsMIStdOspfv3AreaEntry | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.1 | ColumnfsMIStdOspfv3AreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.2 | ColumnfsMIStdOspfv3ImportAsExtern | read-create | current | Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Typ… |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.3 | ColumnfsMIStdOspfv3AreaSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.4 | ColumnfsMIStdOspfv3AreaBdrRtrCount | read-only | current | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.5 | ColumnfsMIStdOspfv3AreaAsBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.6 | ColumnfsMIStdOspfv3AreaScopeLsaCount | read-only | current | The total number of Area-Scope link-state advertisements in this area's link-state database. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.7 | ColumnfsMIStdOspfv3AreaScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determin… |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.8 | ColumnfsMIStdOspfv3AreaSummary | read-create | current | The variable ospfv3AreaSummary controls the im- port of Inter-Area LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router wi… |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.9 | ColumnfsMIStdOspfv3StubMetric | read-create | current | The metric value advertised for the default route into Stub and NSSA areas. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.10 | ColumnfsMIStdOspfv3AreaNssaTranslatorRole | read-create | current | Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.11 | ColumnfsMIStdOspfv3AreaNssaTranslatorState | read-only | current | Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border … |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.12 | ColumnfsMIStdOspfv3AreaNssaTranslatorStabilityInterval | read-create | current | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.13 | ColumnfsMIStdOspfv3AreaNssaTranslatorEvents | read-only | current | Indicates the number of Translator State changes that have occurred since the last boot-up. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.14 | ColumnfsMIStdOspfv3AreaStubMetricType | read-create | current | This variable displays the type of metric ad- vertised as a default route. |
| 1.3.6.1.4.1.10876.101.2.23.1.2.1.15 | ColumnfsMIStdOspfv3AreaStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.10876.101.2.23.1.3 | TablefsMIStdOspfv3AsLsdbTable | not-accessible | current | The OSPFv3 Process's AS-Scope Link State Database. |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1 | RowfsMIStdOspfv3AsLsdbEntry | not-accessible | current | A single AS-Scope Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.1 | ColumnfsMIStdOspfv3AsLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. AS-Scope LSAs not recognized by the router may be stored … |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.2 | ColumnfsMIStdOspfv3AsLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.3 | ColumnfsMIStdOspfv3AsLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.4 | ColumnfsMIStdOspfv3AsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.5 | ColumnfsMIStdOspfv3AsLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.6 | ColumnfsMIStdOspfv3AsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.7 | ColumnfsMIStdOspfv3AsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.2.23.1.3.1.8 | ColumnfsMIStdOspfv3AsLsdbTypeKnown | read-only | current | Is the LSA type recognized by this Router? |
| 1.3.6.1.4.1.10876.101.2.23.1.4 | TablefsMIStdOspfv3AreaLsdbTable | not-accessible | current | The OSPFv3 Process's Area-Scope Link State Database. |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1 | RowfsMIStdOspfv3AreaLsdbEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.1 | ColumnfsMIStdOspfv3AreaLsdbAreaId | not-accessible | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.2 | ColumnfsMIStdOspfv3AreaLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Area-Scope LSAs unrecognized by the router are also store… |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.3 | ColumnfsMIStdOspfv3AreaLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.4 | ColumnfsMIStdOspfv3AreaLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.5 | ColumnfsMIStdOspfv3AreaLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.6 | ColumnfsMIStdOspfv3AreaLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.7 | ColumnfsMIStdOspfv3AreaLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.8 | ColumnfsMIStdOspfv3AreaLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.2.23.1.4.1.9 | ColumnfsMIStdOspfv3AreaLsdbTypeKnown | read-only | current | Is the LSA type recognized by this Router? |
| 1.3.6.1.4.1.10876.101.2.23.1.5 | TablefsMIStdOspfv3LinkLsdbTable | not-accessible | current | The OSPFv3 Process's Link-Scope Link State Database. |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1 | RowfsMIStdOspfv3LinkLsdbEntry | not-accessible | current | A single Link-Scope Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.1 | ColumnfsMIStdOspfv3LinkLsdbIfIndex | not-accessible | current | The identifier of the link from which the LSA was received. |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.2 | ColumnfsMIStdOspfv3LinkLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Link-Scope LSAs unrecognized by the router are also store… |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.3 | ColumnfsMIStdOspfv3LinkLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.4 | ColumnfsMIStdOspfv3LinkLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.5 | ColumnfsMIStdOspfv3LinkLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.6 | ColumnfsMIStdOspfv3LinkLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.7 | ColumnfsMIStdOspfv3LinkLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.8 | ColumnfsMIStdOspfv3LinkLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.9 | ColumnfsMIStdOspfv3LinkLsdbTypeKnown | read-only | current | Indicates whether the LSA type is recognized by this Router. |
| 1.3.6.1.4.1.10876.101.2.23.1.5.1.10 | ColumnfsMIStdOspfv3LinkLsdbContextId | read-only | current | A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized durin… |
| 1.3.6.1.4.1.10876.101.2.23.1.6 | TablefsMIStdOspfv3HostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.10876.101.2.23.1.6.1 | RowfsMIStdOspfv3HostEntry | not-accessible | current | A metric to be advertised when a given host is reachable. |
| 1.3.6.1.4.1.10876.101.2.23.1.6.1.1 | ColumnfsMIStdOspfv3HostAddressType | not-accessible | current | The address type of fsMIStdOspfv3HostAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.10876.101.2.23.1.6.1.2 | ColumnfsMIStdOspfv3HostAddress | not-accessible | current | The IPv6 Address of the Host. Must be a Global or Site-local address. |
| 1.3.6.1.4.1.10876.101.2.23.1.6.1.3 | ColumnfsMIStdOspfv3HostMetric | read-create | current | The Metric to be advertised. |
| 1.3.6.1.4.1.10876.101.2.23.1.6.1.4 | ColumnfsMIStdOspfv3HostAreaID | read-create | current | The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 in- terface is in, or 0.0.0.0 |
| 1.3.6.1.4.1.10876.101.2.23.1.6.1.5 | ColumnfsMIStdOspfv3HostStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.10876.101.2.23.1.7 | TablefsMIStdOspfv3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1 | RowfsMIStdOspfv3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.1 | ColumnfsMIStdOspfv3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.2 | ColumnfsMIStdOspfv3IfAreaId | read-create | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.3 | ColumnfsMIStdOspfv3IfType | read-create | current | The OSPFv3 interface type. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.4 | ColumnfsMIStdOspfv3IfAdminStat | read-create | current | The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The … |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.5 | ColumnfsMIStdOspfv3IfRtrPriority | read-create | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.6 | ColumnfsMIStdOspfv3IfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.7 | ColumnfsMIStdOspfv3IfRetransInterval | read-create | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.8 | ColumnfsMIStdOspfv3IfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.9 | ColumnfsMIStdOspfv3IfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.10 | ColumnfsMIStdOspfv3IfPollInterval | read-create | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.11 | ColumnfsMIStdOspfv3IfState | read-only | current | The OSPFv3 Interface State. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.12 | ColumnfsMIStdOspfv3IfDesignatedRouter | read-only | current | The Router ID of the Designated Router. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.13 | ColumnfsMIStdOspfv3IfBackupDesignatedRouter | read-only | current | The Router ID of the Backup Designated Router. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.14 | ColumnfsMIStdOspfv3IfEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.15 | ColumnfsMIStdOspfv3IfMulticastForwarding | read-create | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.16 | ColumnfsMIStdOspfv3IfDemand | read-create | current | Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on th… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.17 | ColumnfsMIStdOspfv3IfMetricValue | read-create | current | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by … |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.18 | ColumnfsMIStdOspfv3IfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link-state advertisements in this link's link-state database. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.19 | ColumnfsMIStdOspfv3IfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determin… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.20 | ColumnfsMIStdOspfv3IfInstId | read-create | current | Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance … |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.21 | ColumnfsMIStdOspfv3IfDemandNbrProbe | read-create | current | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.22 | ColumnfsMIStdOspfv3IfDemandNbrProbeRetxLimit | read-create | current | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.23 | ColumnfsMIStdOspfv3IfDemandNbrProbeInterval | read-create | current | Defines how often the neighbor will be probed. |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.24 | ColumnfsMIStdOspfv3IfContextId | read-only | current | A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized durin… |
| 1.3.6.1.4.1.10876.101.2.23.1.7.1.25 | ColumnfsMIStdOspfv3IfStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.10876.101.2.23.1.8 | TablefsMIStdOspfv3VirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1 | RowfsMIStdOspfv3VirtIfEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.1 | ColumnfsMIStdOspfv3VirtIfAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.2 | ColumnfsMIStdOspfv3VirtIfNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.3 | ColumnfsMIStdOspfv3VirtIfIndex | read-create | current | The interface ID assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.4 | ColumnfsMIStdOspfv3VirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.5 | ColumnfsMIStdOspfv3VirtIfRetransInterval | read-create | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.6 | ColumnfsMIStdOspfv3VirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.7 | ColumnfsMIStdOspfv3VirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.8 | ColumnfsMIStdOspfv3VirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.9 | ColumnfsMIStdOspfv3VirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.10 | ColumnfsMIStdOspfv3VirtIfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link-state advertisements in this virtual link's link-state database. |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.11 | ColumnfsMIStdOspfv3VirtIfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to … |
| 1.3.6.1.4.1.10876.101.2.23.1.8.1.12 | ColumnfsMIStdOspfv3VirtIfStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.10876.101.2.23.1.9 | TablefsMIStdOspfv3NbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1 | RowfsMIStdOspfv3NbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.1 | ColumnfsMIStdOspfv3NbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.2 | ColumnfsMIStdOspfv3NbrRtrId | not-accessible | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.3 | ColumnfsMIStdOspfv3NbrAddressType | read-only | current | The address type of fsMIStdOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.4 | ColumnfsMIStdOspfv3NbrAddress | read-only | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.5 | ColumnfsMIStdOspfv3NbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.6 | ColumnfsMIStdOspfv3NbrPriority | read-only | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.7 | ColumnfsMIStdOspfv3NbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.8 | ColumnfsMIStdOspfv3NbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.9 | ColumnfsMIStdOspfv3NbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.10 | ColumnfsMIStdOspfv3NbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.11 | ColumnfsMIStdOspfv3NbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.12 | ColumnfsMIStdOspfv3NbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.13 | ColumnfsMIStdOspfv3NbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.14 | ColumnfsMIStdOspfv3NbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.9.1.15 | ColumnfsMIStdOspfv3NbrContextId | read-only | current | A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized durin… |
| 1.3.6.1.4.1.10876.101.2.23.1.10 | TablefsMIStdOspfv3NbmaNbrTable | not-accessible | current | A table of configured non-virtual neighbor information and neighbors dynamically discovered by lower-level protocols such as Inverse Neighbor Discovery. |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1 | RowfsMIStdOspfv3NbmaNbrEntry | not-accessible | current | The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery. |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.1 | ColumnfsMIStdOspfv3NbmaNbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.2 | ColumnfsMIStdOspfv3NbmaNbrAddressType | not-accessible | current | The address type of fsMIStdOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.3 | ColumnfsMIStdOspfv3NbmaNbrAddress | not-accessible | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.4 | ColumnfsMIStdOspfv3NbmaNbrPriority | read-create | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.5 | ColumnfsMIStdOspfv3NbmaNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. A value of 0.0.0.0 is returned until… |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.6 | ColumnfsMIStdOspfv3NbmaNbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.7 | ColumnfsMIStdOspfv3NbmaNbrStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Manually… |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.8 | ColumnfsMIStdOspfv3NbmaNbrContextId | read-only | current | A 32-bit unique context id for each entry. Minimum value is 0 and Maximum depends upon system configuration. Default value is 0 which will be initialized durin… |
| 1.3.6.1.4.1.10876.101.2.23.1.10.1.9 | ColumnfsMIStdOspfv3NbmaNbrStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.10876.101.2.23.1.11 | TablefsMIStdOspfv3VirtNbrTable | not-accessible | current | A table of virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1 | RowfsMIStdOspfv3VirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.1 | ColumnfsMIStdOspfv3VirtNbrArea | not-accessible | current | The Transit Area Identifier. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.2 | ColumnfsMIStdOspfv3VirtNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.3 | ColumnfsMIStdOspfv3VirtNbrIfIndex | read-only | current | The local interface ID for the virtual link over which the neighbor can be reached. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.4 | ColumnfsMIStdOspfv3VirtNbrAddressType | read-only | current | The address type of fsMIStdOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.5 | ColumnfsMIStdOspfv3VirtNbrAddress | read-only | current | The IPv6 address advertised by this Virtual Neighbor. It must be a Site-Local or Global scope address. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.6 | ColumnfsMIStdOspfv3VirtNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.7 | ColumnfsMIStdOspfv3VirtNbrState | read-only | current | The state of the Virtual Neighbor Relation- ship. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.8 | ColumnfsMIStdOspfv3VirtNbrEvents | read-only | current | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.9 | ColumnfsMIStdOspfv3VirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.10 | ColumnfsMIStdOspfv3VirtNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.11 | ColumnfsMIStdOspfv3VirtNbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.12 | ColumnfsMIStdOspfv3VirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.13 | ColumnfsMIStdOspfv3VirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.11.1.14 | ColumnfsMIStdOspfv3VirtNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.2.23.1.12 | TablefsMIStdOspfv3AreaAggregateTable | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most spe… |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1 | RowfsMIStdOspfv3AreaAggregateEntry | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most spe… |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.1 | ColumnfsMIStdOspfv3AreaAggregateAreaID | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.2 | ColumnfsMIStdOspfv3AreaAggregateAreaLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.4 | ColumnfsMIStdOspfv3AreaAggregatePrefixType | not-accessible | current | The prefix type of fsMIStdOspfv3AreaAggregatePrefix. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.5 | ColumnfsMIStdOspfv3AreaAggregatePrefix | not-accessible | current | The IPv6 Prefix. |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.6 | ColumnfsMIStdOspfv3AreaAggregatePrefixLength | not-accessible | current | The length of the prefix (in bits). A prefix can not be shorter than 3 bits. |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.7 | ColumnfsMIStdOspfv3AreaAggregateEffect | read-create | current | Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at … |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.8 | ColumnfsMIStdOspfv3AreaAggregateRouteTag | read-create | current | This tag is advertised only in the summarized As-External LSA when summarizing from type-7 to type-5. |
| 1.3.6.1.4.1.10876.101.2.23.1.12.1.9 | ColumnfsMIStdOspfv3AreaAggregateStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RouterDeadRange | Integer32 (1..'FFFF'h) | current | The range of intervals in seconds that a routers hello must have not been seen before a neighbor declares the router down |
| UpToRefreshInterval | Integer32 (1..1800) | current | The values one might be able to configure for variables bounded by the Refresh Interval |