SUPERMICRO-MPLS-FRR-MIB
70 objects
All rights reserved
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.3 | IdentityfsMplsFrrMIB | All rights reserved | ||
| 1.3.6.1.4.1.10876.101.1.3.0 | NodefsMplsFrrNotif | |||
| 1.3.6.1.4.1.10876.101.1.3.0.1 | NotificationfsMplsFrrFacProtected | current | This notification is generated when a tunnel running over an interface as specified in the fsMplsFrrConstTable is initially protected by the backup tunnel also… | |
| 1.3.6.1.4.1.10876.101.1.3.0.2 | NotificationfsMplsFrrFacUnProtected | current | This notification is generated when the final tunnel that is being protected by a backup tunnel as specified in the fsMplsFrrConstTable is restored to normal o… | |
| 1.3.6.1.4.1.10876.101.1.3.1 | NodefsMplsFrrScalars | |||
| 1.3.6.1.4.1.10876.101.1.3.1.1 | ScalarfsMplsFrrDetourIncoming | read-only | current | The number of detour LSPs entering the device (greater than or equal to 0) if fsMplsFrrConstProtectionMethod is set to oneToOneBackup(1), or -1 if fsMplsFrrCon… |
| 1.3.6.1.4.1.10876.101.1.3.1.2 | ScalarfsMplsFrrDetourOutgoing | read-only | current | The number of detour LSPs leaving the device (greater than or equal to 0) if fsMplsFrrConstProtectionMethod is set to oneToOneBackup(1), or -1 if fsMplsFrrCons… |
| 1.3.6.1.4.1.10876.101.1.3.1.3 | ScalarfsMplsFrrDetourOriginating | read-only | current | The number of detour LSPs originating at this PLR (greater than or equal to 0) if fsMplsFrrConstProtectionMethod is set to oneToOneBackup(1). This object MUST … |
| 1.3.6.1.4.1.10876.101.1.3.1.4 | ScalarfsMplsFrrSwitchover | read-only | current | The number of tunnel instances for which this LSR is the ingress that are currently using a detour or bypass LSP to reach their egress. |
| 1.3.6.1.4.1.10876.101.1.3.1.5 | ScalarfsMplsFrrConfIfs | read-only | current | Indicates the number of MPLS interfaces configured for protection by the FRR feature if fsMplsFrrConstProtectionMethod is set to facilityBackup(2), otherwise t… |
| 1.3.6.1.4.1.10876.101.1.3.1.6 | ScalarfsMplsFrrActProtectedIfs | read-only | current | Indicates the number of interfaces currently being protected by the FRR feature if fsMplsFrrConstProtectionMethod is set to facilityBackup(2), otherwise this v… |
| 1.3.6.1.4.1.10876.101.1.3.1.7 | ScalarfsMplsFrrConfProtectionTuns | read-only | current | Indicates the number of bypass tunnels configured to protect TE tunnels on this LSR using the FRR feature if fsMplsFrrConstProtectionMethod is set to facilityB… |
| 1.3.6.1.4.1.10876.101.1.3.1.8 | ScalarfsMplsFrrActProtectionTuns | read-only | current | Indicates the number of bypass tunnels indicated in mplsFrrConfProtectionTuns whose operStatus is up(1) indicating that they are currently protecting TE tunnel… |
| 1.3.6.1.4.1.10876.101.1.3.1.9 | ScalarfsMplsFrrActProtectedLSPs | read-only | current | Indicates the number of LSPs currently protected by the FRR feature where this device acts as the PLR for those LSPs. If fsMplsFrrConstProtectionMethod is set … |
| 1.3.6.1.4.1.10876.101.1.3.1.10 | ScalarfsMplsFrrRevertiveMode | read-write | current | Global revertive mode: The head-end LSR of each tunnel is responsible for reoptimizing the TE LSPs that used the failed resource. There are several potential r… |
| 1.3.6.1.4.1.10876.101.1.3.1.11 | ScalarfsMplsFrrDetourMergingEnabled | read-write | current | Enables or disables FRR Detour Merging. Detour Merging is enabled by default. This is applicable for One-to-One Backup Method only. |
| 1.3.6.1.4.1.10876.101.1.3.1.12 | ScalarfsMplsFrrDetourEnabled | read-write | current | Enables or disables FRR Detour object handling. Detour object handling is enabled by default. This is applicable for One-to-One Backup Method only. |
| 1.3.6.1.4.1.10876.101.1.3.1.13 | ScalarfsMplsFrrCspfRetryInterval | read-write | current | The value of the CSPF retry interval, which is used to periodically send the CSPF calculation trigger until the valid CSPF calculation done. It is specified in… |
| 1.3.6.1.4.1.10876.101.1.3.1.14 | ScalarfsMplsFrrCspfRetryCount | read-write | current | This indicates the value of the CSPF retry count. |
| 1.3.6.1.4.1.10876.101.1.3.1.15 | ScalarfsMplsFrrNotifsEnabled | read-write | current | Enables or disables FRR notifications defined in this MIB module. Notifications are disabled by default. |
| 1.3.6.1.4.1.10876.101.1.3.1.16 | ScalarfsMplsFrrMakeAfterBreakEnabled | read-write | current | Enables or disables Make after break support for FRR Protected LSP. It is disabled by default. |
| 1.3.6.1.4.1.10876.101.1.3.2 | NodefsMplsFrrObjects | |||
| 1.3.6.1.4.1.10876.101.1.3.2.1 | NodefsMplsFrrGeneralObjects | |||
| 1.3.6.1.4.1.10876.101.1.3.2.1.1 | TablefsMplsFrrConstTable | not-accessible | current | This table shows detour LSP or bypass tunnel setup constraints. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1 | RowfsMplsFrrConstEntry | not-accessible | current | An entry in this table represents detour LSP or bypass tunnel setup constraints for a tunnel instance to be protected by detour LSPs or a bypass tunnel. Agents… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.1 | ColumnfsMplsFrrConstIfIndex | read-only | current | Uniquely identifies an interface which a fast reroute protection tunnel is configured to potentially protect in the event of a fault. Entries with this index s… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.2 | ColumnfsMplsFrrConstProtectionMethod | read-create | current | Indicates which protection method is to be used for fast reroute on this device. Some devices may require a reboot if this variable is to take affect after bei… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.3 | ColumnfsMplsFrrConstProtectionType | read-create | current | Indicates type of the resource protection: linkProtection(1) indicates that this tunnel is setup to protect a particular link's resources. nodeProtection(2) in… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.4 | ColumnfsMplsFrrConstSetupPrio | read-create | current | Indicates the setup priority of the detour LSP or bypass tunnel. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.5 | ColumnfsMplsFrrConstHoldingPrio | read-create | current | Indicates the holding priority for detour LSP or bypass tunnel. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.6 | ColumnfsMplsFrrConstSEStyle | read-create | current | Indicates the SE style desired. This will be TRUE when facility backup method is desired. One to One backup method can be made sender template specific by sett… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.7 | ColumnfsMplsFrrConstInclAnyAffinity | read-create | current | Indicates the include-any link constraint for the detour LSP or bypass tunnel. A link satisfies the include-any constraint if and only if the constraint is zer… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.8 | ColumnfsMplsFrrConstInclAllAffinity | read-create | current | Indicates the include-all link constraint for the detour LSP or bypass tunnel. A link satisfies the include-all constraint if and only if the link contains all… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.9 | ColumnfsMplsFrrConstExclAnyAffinity | read-create | current | Indicates the exclude-any link constraint for the detour LSP or bypass tunnel. A link satisfies the exclude-any constraint if and only if the link contains non… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.10 | ColumnfsMplsFrrConstHopLimit | read-create | current | The maximum number of hops that the detour LSP or bypass tunnel may traverse. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.11 | ColumnfsMplsFrrConstBandwidth | read-create | current | The maximum bandwidth specifically reserved for detour LSP or bypass tunnel, in units of thousands of bits per second (Kbps). Note that setting this value to 0… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.1.1.12 | ColumnfsMplsFrrConstRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2 | TablefsMplsTunnelExtTable | not-accessible | current | This table is an extension to mplsTunnelTable. This Table performs the association of tunnels to an interface, association of Protected Tunnel with that of bac… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1 | RowfsMplsTunnelExtEntry | not-accessible | current | An entry in this table represents an extension to mplsTunnelTable. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.1 | ColumnfsMplsTunnelExtProtIfIndex | read-only | current | Uniquely identifies an interface which a fast reroute protection tunnel is configured to potentially protect in the event of a fault. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.2 | ColumnfsMplsTunnelExtProtectionType | read-only | current | Indicates type of the resource protection: none(0) indicates default value this will be used when tunnel is not supporting facility backups. linkProtection(1) … |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.3 | ColumnfsMplsTunnelExtBkpTunIdx | read-only | current | Denotes Backup Tunnel Index for the Tunnel in mplsTunnelTable. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.4 | ColumnfsMplsTunnelExtBkpInst | read-only | current | Denotes Backup Tunnel Instance for the Tunnel in mplsTunnelTable. - lower 16 bits : protected tunnel instance - higher 16 bits: detour instance |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.5 | ColumnfsMplsTunnelExtBkpIngrLSRId | read-only | current | Denotes Backup Tunnel Ingress LSR ID for the Tunnel in mplsTunnelTable. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.6 | ColumnfsMplsTunnelExtBkpEgrLSRId | read-only | current | Denotes Backup Tunnel Egress LSR ID for the Tunnel in mplsTunnelTable. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.7 | ColumnfsMplsTunnelExtOne2OnePlrId | read-only | current | This value represents the PLR that has initiated a detour LSP to protect a tunnel instance. This value is signalled via the DETOUR object defined in MPLS RSVP … |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.8 | ColumnfsMplsTunnelExtOne2OnePlrSenderAddrType | read-only | current | Denotes the address type of this detour instance's sender address. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.9 | ColumnfsMplsTunnelExtOne2OnePlrSenderAddr | read-only | current | The IP address of the PLR which has initiated the detour LSP. The type of this address is determined by the value of the fsMplsTunnelExtOne2OnePlrSenderAddrTyp… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.10 | ColumnfsMplsTunnelExtOne2OnePlrAvoidNAddrType | read-only | current | Denotes the address type of the node that this PLR tries to avoid. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.11 | ColumnfsMplsTunnelExtOne2OnePlrAvoidNAddr | read-only | current | The IP address of the node that this PLR tries to avoid. The type of this address is determined by the value of the fsMplsTunnelExtOne2OnePlrAvoidNAddrType obj… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.12 | ColumnfsMplsTunnelExtDetourActive | read-only | current | Indicates whether or not the main LSP has switched over to this detour LSP. This is only relevant for detours originated by this node. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.13 | ColumnfsMplsTunnelExtDetourMerging | read-only | current | This value represents whether or not this detour is merged. This value MUST be set to none(1) if this detour is not merged. This value MUST be set to protected… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.14 | ColumnfsMplsTunnelExtFacRouteDBProtTunStatus | read-only | current | Specifies the state of the protected tunnel. active This tunnel's label has been placed in the LFIB and is ready to be applied to incoming packets. ready - Thi… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.15 | ColumnfsMplsTunnelExtFacRouteDBProtTunResvBw | read-only | current | Specifies the amount of bandwidth in units of '1,000 bits per second', actually reserved by the protection tunnel for facility backup purposes. This value is r… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.16 | ColumnfsMplsTunnelExtProtectionMethod | read-only | current | Indicates type of the protection method in use: oneToOneBackup(1) indicates OneToOne Backup method is used. facilityBackup(2) indicates facility backup method … |
| 1.3.6.1.4.1.10876.101.1.3.2.1.2.1.17 | ColumnfsMplsTunnelExtMaxGblRevertTime | read-write | current | The Maximum Time after which the re-optimization of LSP begins for the FRR Protected LSP in case of link/node failure detection. It is specified in milli secon… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3 | TablefsMplsBypassTunnelIfTable | not-accessible | current | This table associates the tunnel to an interface to be used as a Backup Tunnel for a protected tunnelin case of facility backup method. This Table is applicabl… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3.1 | RowfsMplsBypassTunnelIfEntry | not-accessible | current | An entry in this table represents the association of the tunnel to an interface to be used as a backup tunnel for fast reroute supported tunnel in case of faci… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3.1.1 | ColumnfsMplsBypassTunnelIfIndex | not-accessible | current | Uniquely identifies an interface to which a Bypass Tunnel is associated to protect a Fast ReRoute Supported Tunnel in the event of a fault. It is the primary i… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3.1.2 | ColumnfsMplsBypassTunnelIndex | not-accessible | current | Uniquely identifies the Tunnel index of the Bypass Tunnel used to protect a Fast ReRoute Supported Tunnel in the even of fault. It is a secondary index to this… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3.1.3 | ColumnfsMplsBypassTunnelInstance | not-accessible | current | Uniquely identifies the Tunnel Instance of the Bypass Tunnel used to protect a Fast ReRoute Supported Tunnel in the even of fault. It is a secondary index to t… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3.1.4 | ColumnfsMplsBypassTunnelIngressLSRId | not-accessible | current | Uniquely identifies the Tunnel Ingress LSR ID of the Bypass Tunnel used to protect a Fast ReRoute Supported Tunnel in the even of fault. It is a secondary inde… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3.1.5 | ColumnfsMplsBypassTunnelEgressLSRId | not-accessible | current | Uniquely identifies the Tunnel Egress LSR ID of the Bypass Tunnel used to protect a Fast ReRoute Supported Tunnel in the even of fault. It is a secondary index… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.3.1.6 | ColumnfsMplsBypassTunnelRowStatus | read-create | current | This variable is used to create and delete a row in this table. The Only Operations supported in this table are Create and Go and Destroy. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.4 | TablefsMplsFrrTunARHopTable | not-accessible | current | This table sparsely extends mplsTunnelARHopTable defined in the MPLS-TE-STD-MIB MIB module with fast-reroute objects. These objects specify the status of local… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.4.1 | RowfsMplsFrrTunARHopEntry | not-accessible | current | This entry contains fast-reroute protection status of a single protected tunnel hop. |
| 1.3.6.1.4.1.10876.101.1.3.2.1.4.1.1 | ColumnfsMplsFrrTunARHopProtectType | read-only | current | This object indicates the protection type or types of the associated path hop object. Note that since this object is a BITS type, one, none or all of the bits … |
| 1.3.6.1.4.1.10876.101.1.3.2.1.4.1.2 | ColumnfsMplsFrrTunARHopProtectTypeInUse | read-only | current | This object indicates the protection type or types that are currently in use by the associated path hop object. Note that since this object is a BITS type, one… |
| 1.3.6.1.4.1.10876.101.1.3.2.1.4.1.3 | ColumnfsMplsFrrTunARHopLabel | read-only | current | This label indicates the downstream node label used incase of fast reroute facility backup method is desired by the LSP |
| 1.3.6.1.4.1.10876.101.1.3.2.1.4.1.4 | ColumnfsMplsFrrTunARBwProtAvailable | read-only | current | This Object indicates whether bandwidth protection is available on this node. |