SUPERMICRO-OSPF-MIB
252 objects
Changed the Enterprises MIB from SNMPv1 syntax MIB to SNMPv2 syntax MIB
Imported Objects
| IF-MIB | InterfaceIndex |
| OSPF-MIB | AreaID BigMetric ospfIfEntry ospfNbrRtrId ospfRouterId ospfVirtIfEntry ospfVirtNbrEntry PositiveInteger RouterID Status TOSType |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.10 | Identityfutospf | Changed the Enterprises MIB from SNMPv1 syntax MIB to SNMPv2 syntax MIB | ||
| 1.3.6.1.4.1.10876.101.1.10.1 | NodefutospfGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.1.1 | ScalarfutOspfOverFlowState | read-only | current | Indicates whether router is in overflow state or not. |
| 1.3.6.1.4.1.10876.101.1.10.1.2 | ScalarfutOspfPktsRcvd | read-only | current | This gives the Total no. of Packets received. |
| 1.3.6.1.4.1.10876.101.1.10.1.3 | ScalarfutOspfPktsTxed | read-only | current | This gives the Total no. of Packets Transmitted. |
| 1.3.6.1.4.1.10876.101.1.10.1.4 | ScalarfutOspfPktsDisd | read-only | current | This gives the Total no. of Packets Discarded. |
| 1.3.6.1.4.1.10876.101.1.10.1.5 | ScalarfutOspfRFC1583Compatibility | read-write | current | Controls the preference rules, when choosing among multiple AS external LSAs advertising the same destination. When set to enabled, the preference rules remain… |
| 1.3.6.1.4.1.10876.101.1.10.1.6 | ScalarfutOspfMaxAreas | read-write | deprecated | This gives the maximum number of areas. |
| 1.3.6.1.4.1.10876.101.1.10.1.7 | ScalarfutOspfMaxLSAperArea | read-write | deprecated | This gives the maximum number of LSAs in each area. |
| 1.3.6.1.4.1.10876.101.1.10.1.8 | ScalarfutOspfMaxExtLSAs | read-write | deprecated | This gives the maximum number of AS-EXT LSAs in the router's LSDB. |
| 1.3.6.1.4.1.10876.101.1.10.1.9 | ScalarfutOspfMaxSelfOrgLSAs | read-write | deprecated | This gives the maximum number of Self Originated LSAs that can be geneated by the router. |
| 1.3.6.1.4.1.10876.101.1.10.1.10 | ScalarfutOspfMaxRoutes | read-write | deprecated | This gives the maximum number of routing table entries. |
| 1.3.6.1.4.1.10876.101.1.10.1.11 | ScalarfutOspfMaxLsaSize | read-write | deprecated | This specifies the maximum size of the LSA. |
| 1.3.6.1.4.1.10876.101.1.10.1.12 | ScalarfutOspfTraceLevel | read-write | current | |
| 1.3.6.1.4.1.10876.101.1.10.1.13 | ScalarfutOspfMinLsaInterval | read-write | current | The minimum time between distinct originations of any particular LSA. |
| 1.3.6.1.4.1.10876.101.1.10.1.14 | ScalarfutOspfABRType | read-write | current | Different Types of ABRs supported |
| 1.3.6.1.4.1.10876.101.1.10.1.15 | ScalarfutOspfNssaAsbrDefRtTrans | read-write | current | Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When… |
| 1.3.6.1.4.1.10876.101.1.10.1.16 | ScalarfutOspfDefaultPassiveInterface | read-write | current | When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not… |
| 1.3.6.1.4.1.10876.101.1.10.1.17 | ScalarfutOspfSpfHoldtime | read-write | current | Minimum time between two consecutive SPF calculations. Time is configured in milli seconds |
| 1.3.6.1.4.1.10876.101.1.10.1.18 | ScalarfutOspfSpfDelay | read-write | current | The Delay at which routing calculation is carried after a topology change. Time is configured in milli seconds |
| 1.3.6.1.4.1.10876.101.1.10.1.19 | ScalarfutOspfRestartSupport | read-write | current | The router.s support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object… |
| 1.3.6.1.4.1.10876.101.1.10.1.20 | ScalarfutOspfRestartInterval | read-write | current | Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.4.1.10876.101.1.10.1.21 | ScalarfutOspfRestartStrictLsaChecking | read-write | current | Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile … |
| 1.3.6.1.4.1.10876.101.1.10.1.22 | ScalarfutOspfRestartStatus | read-only | current | Current status of OSPF graceful restart. |
| 1.3.6.1.4.1.10876.101.1.10.1.23 | ScalarfutOspfRestartAge | read-only | current | Remaining time in current OSPF graceful restart interval. |
| 1.3.6.1.4.1.10876.101.1.10.1.24 | ScalarfutOspfRestartExitReason | read-only | current | Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a res… |
| 1.3.6.1.4.1.10876.101.1.10.1.25 | ScalarfutOspfHelperSupport | read-write | current | The router.s helper support for OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. futOspfHelperSupport is ind… |
| 1.3.6.1.4.1.10876.101.1.10.1.26 | ScalarfutOspfHelperGraceTimeLimit | read-write | current | Configured OSPF graceful restart interval limit in helper side. Time is configured in seconds This object is persistent and when written the entity SHOULD save… |
| 1.3.6.1.4.1.10876.101.1.10.1.27 | ScalarfutOspfRestartAckState | read-write | current | Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and whe… |
| 1.3.6.1.4.1.10876.101.1.10.1.28 | ScalarfutOspfGraceLsaRetransmitCount | read-write | current | Number of retransmissions for unacknowledged GraceLSAs |
| 1.3.6.1.4.1.10876.101.1.10.1.29 | ScalarfutOspfRestartReason | read-write | current | The router.s restarter reason code of OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is persis… |
| 1.3.6.1.4.1.10876.101.1.10.1.30 | ScalarfutOspfRTStaggeringInterval | read-write | current | This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPF operations.Default value of this … |
| 1.3.6.1.4.1.10876.101.1.10.1.31 | ScalarfutOspfRTStaggeringStatus | read-write | current | This object indicates the status of route table calculation staggering option |
| 1.3.6.1.4.1.10876.101.1.10.1.32 | ScalarfutOspfHotStandbyAdminStatus | read-only | current | High Availabilty feature enabled or disabled in OSPF |
| 1.3.6.1.4.1.10876.101.1.10.1.33 | ScalarfutOspfHotStandbyState | read-only | current | Internal State of the OSPF instance. init(1) implies that the OSPF instance is up, but is unaware of the status of its peer. activeStandbyUp(2) implies that th… |
| 1.3.6.1.4.1.10876.101.1.10.1.34 | ScalarfutOspfDynamicBulkUpdStatus | read-only | current | Status of dynamic bulk update between active and dynamic OSPF instance. |
| 1.3.6.1.4.1.10876.101.1.10.1.35 | ScalarfutOspfStanbyHelloSyncCount | read-only | current | Total number of hello packets synced. |
| 1.3.6.1.4.1.10876.101.1.10.1.36 | ScalarfutOspfStanbyLsaSyncCount | read-only | current | Total number of LSAs synced. |
| 1.3.6.1.4.1.10876.101.1.10.1.37 | ScalarfutOspfExtTraceLevel | read-write | current | |
| 1.3.6.1.4.1.10876.101.1.10.1.38 | ScalarfutospfRouterIdPermanence | read-write | current | This variable displays the status of the ospfRouterId. 'dynamic' and 'permanent' refer to how the ospfRouterId is derived. This object is used to save and rest… |
| 1.3.6.1.4.1.10876.101.1.10.1.39 | ScalarfutOspfBfdStatus | read-write | current | This object is to enable/disable BFD feature in OSPF.By default is enabled. If it is disabled OSPF will not register with BFD for neighbor IP path monitoring |
| 1.3.6.1.4.1.10876.101.1.10.1.40 | ScalarfutOspfBfdAllIfState | read-write | current | This object is to enable/disable BFD for all OSPF interfaces By default it is disabled. If it is enabled, OSPF will register with BFD for neighbor IP path moni… |
| 1.3.6.1.4.1.10876.101.1.10.2 | TablefutOspfAreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.1.10.2.1 | RowfutOspfAreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.10876.101.1.10.2.1.1 | ColumnfutOspfAreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.10876.101.1.10.2.1.2 | ColumnfutOspfAreaIfCount | read-only | current | This gives the Total no. of Ifaces in the Area |
| 1.3.6.1.4.1.10876.101.1.10.2.1.3 | ColumnfutOspfAreaNetCount | read-only | current | This gives the Total no. of Networks in the Area. |
| 1.3.6.1.4.1.10876.101.1.10.2.1.4 | ColumnfutOspfAreaRtrCount | read-only | current | This gives the Total no. of Routers in the Area. |
| 1.3.6.1.4.1.10876.101.1.10.2.1.5 | ColumnfutOspfAreaNSSATranslatorRole | read-create | current | Indicates an NSSA Border router's ability to perform NSSA Translation of Type-7 LSAs to Type-5 LSAs. |
| 1.3.6.1.4.1.10876.101.1.10.2.1.6 | ColumnfutOspfAreaNSSATranslatorState | read-only | current | Indicates if and how an NSSA Border router is performing NSSA translation of Type-7 to into Type-5 LSAs.When this object is set to enabled, the NSSA border rou… |
| 1.3.6.1.4.1.10876.101.1.10.2.1.7 | ColumnfutOspfAreaNSSATranslatorStabilityInterval | read-create | current | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| 1.3.6.1.4.1.10876.101.1.10.2.1.8 | ColumnfutOspfAreaNSSATranslatorEvents | read-only | current | Indicates the number of translator state changes that have occurred since the last boot-up. |
| 1.3.6.1.4.1.10876.101.1.10.2.1.9 | ColumnfutOspfAreaDfInfOriginate | read-create | current | Indicates the generation default Type-7 LSA. |
| 1.3.6.1.4.1.10876.101.1.10.3 | TablefutOspfHostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.10876.101.1.10.3.1 | RowfutOspfHostEntry | not-accessible | current | A metric to be advertised, for a given type of service, when a given host is reachable. |
| 1.3.6.1.4.1.10876.101.1.10.3.1.1 | ColumnfutOspfHostIpAddress | not-accessible | current | The IP Address of the Host. |
| 1.3.6.1.4.1.10876.101.1.10.3.1.2 | ColumnfutOspfHostTOS | not-accessible | current | The Type of Service of the route being configured. |
| 1.3.6.1.4.1.10876.101.1.10.3.1.3 | ColumnfutOspfHostRouteIfIndex | read-write | current | The Interface to reach the host |
| 1.3.6.1.4.1.10876.101.1.10.4 | TablefutOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.10.4.1 | RowfutOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.1 | ColumnfutOspfIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.2 | ColumnfutOspfAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.10.4.1.3 | ColumnfutOspfIfOperState | read-only | current | This gives the Operational Status of the Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.4 | ColumnfutOspfIfPassive | read-write | current | This object is used to make the interface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal |
| 1.3.6.1.4.1.10876.101.1.10.4.1.5 | ColumnfutOspfIfNbrCount | read-only | current | This gives the Total number of Neighbours through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.6 | ColumnfutOspfIfAdjCount | read-only | current | This gives the Total number of Adjacencies through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.7 | ColumnfutOspfIfHelloRcvd | read-only | current | This gives the Total number of Hello packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.8 | ColumnfutOspfIfHelloTxed | read-only | current | This gives the Total number of Hello packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.9 | ColumnfutOspfIfHelloDisd | read-only | current | This gives the Total number of Hello packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.10 | ColumnfutOspfIfDdpRcvd | read-only | current | This gives the Total number of Ddp packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.11 | ColumnfutOspfIfDdpTxed | read-only | current | This gives the Total number of Ddp packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.12 | ColumnfutOspfIfDdpDisd | read-only | current | This gives the Total number of Ddp packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.13 | ColumnfutOspfIfLrqRcvd | read-only | current | This gives the Total number of Lrq packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.14 | ColumnfutOspfIfLrqTxed | read-only | current | This gives the Total number of Lrq packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.15 | ColumnfutOspfIfLrqDisd | read-only | current | This gives the Total number of Lrq packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.16 | ColumnfutOspfIfLsuRcvd | read-only | current | This gives the Total number of Lsu packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.17 | ColumnfutOspfIfLsuTxed | read-only | current | This gives the Total number of Lsu packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.18 | ColumnfutOspfIfLsuDisd | read-only | current | This gives the Total number of Lsu packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.19 | ColumnfutOspfIfLakRcvd | read-only | current | This gives the Total number of Lak packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.20 | ColumnfutOspfIfLakTxed | read-only | current | This gives the Total number of Lak packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.21 | ColumnfutOspfIfLakDisd | read-only | current | This gives the Total number of Lak packets discarded on that Interface. |
| 1.3.6.1.4.1.10876.101.1.10.4.1.22 | ColumnfutOspfIfBfdState | read-write | current | This object is to enable/disable BFD in a specific OSPF interface. By default it is disabled. But when futOspfBfdAllIfState is enabled, internally this object … |
| 1.3.6.1.4.1.10876.101.1.10.5 | TablefutOspfIfMD5AuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.10.5.1 | RowfutOspfIfMD5AuthEntry | not-accessible | current | The OSPF Interface MD5 Authentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.10.5.1.1 | ColumnfutOspfIfMD5AuthIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.10.5.1.2 | ColumnfutOspfIfMD5AuthAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.10.5.1.3 | ColumnfutOspfIfMD5AuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.5.1.4 | ColumnfutOspfIfMD5AuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.5.1.5 | ColumnfutOspfIfMD5AuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key. The value shown will be configured time + system time at which the value… |
| 1.3.6.1.4.1.10876.101.1.10.5.1.6 | ColumnfutOspfIfMD5AuthKeyStartGenerate | read-write | current | The time the router will start using this key for packets generation.The value shown will be configured time + system time at which the value is configured. |
| 1.3.6.1.4.1.10876.101.1.10.5.1.7 | ColumnfutOspfIfMD5AuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system … |
| 1.3.6.1.4.1.10876.101.1.10.5.1.8 | ColumnfutOspfIfMD5AuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime.The value shown will be configur… |
| 1.3.6.1.4.1.10876.101.1.10.5.1.9 | ColumnfutOspfIfMD5AuthKeyStatus | read-write | current | Identifies the status of the key. NOTE:invalid (2) currently not supported |
| 1.3.6.1.4.1.10876.101.1.10.6 | TablefutOspfVirtIfMD5AuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.10.6.1 | RowfutOspfVirtIfMD5AuthEntry | not-accessible | current | The OSPF Interface MD5 Authentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.10.6.1.1 | ColumnfutOspfVirtIfMD5AuthAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0. |
| 1.3.6.1.4.1.10876.101.1.10.6.1.2 | ColumnfutOspfVirtIfMD5AuthNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.6.1.3 | ColumnfutOspfVirtIfMD5AuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.6.1.4 | ColumnfutOspfVirtIfMD5AuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.6.1.5 | ColumnfutOspfVirtIfMD5AuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key.The value shown will be configured time + system time at which the value … |
| 1.3.6.1.4.1.10876.101.1.10.6.1.6 | ColumnfutOspfVirtIfMD5AuthKeyStartGenerate | read-write | current | The time the router will start using this key for packet generation.The value shown will be configured time + system time at which the value is configured. |
| 1.3.6.1.4.1.10876.101.1.10.6.1.7 | ColumnfutOspfVirtIfMD5AuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system … |
| 1.3.6.1.4.1.10876.101.1.10.6.1.8 | ColumnfutOspfVirtIfMD5AuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime. The value shown will be configu… |
| 1.3.6.1.4.1.10876.101.1.10.6.1.9 | ColumnfutOspfVirtIfMD5AuthKeyStatus | read-write | current | Identifies the status of the key. NOTE: invalid (2) is currently not supported |
| 1.3.6.1.4.1.10876.101.1.10.7 | TablefutOspfNbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.1.10.7.1 | RowfutOspfNbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.7.1.1 | ColumnfutOspfNbrIpAddr | not-accessible | current | The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the … |
| 1.3.6.1.4.1.10876.101.1.10.7.1.2 | ColumnfutOspfNbrAddressLessIndex | not-accessible | current | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.4.1.10876.101.1.10.7.1.3 | ColumnfutOspfNbrDBSummaryQLen | read-only | current | This gives the queue Length of the Database summary List . |
| 1.3.6.1.4.1.10876.101.1.10.7.1.4 | ColumnfutOspfNbrLSReqQLen | read-only | current | This gives the Length of Link State Request Queue . |
| 1.3.6.1.4.1.10876.101.1.10.7.1.5 | ColumnfutOspfNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.7.1.6 | ColumnfutOspfNbrRestartHelperAge | read-only | current | Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.7.1.7 | ColumnfutOspfNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.7.1.8 | ColumnfutOspfNbrBfdState | read-only | current | This is a read-only object. This will be enabled internally only when BFD is enabled for monitoring this neighbor IP path. |
| 1.3.6.1.4.1.10876.101.1.10.8 | TablefutOspfRoutingTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.10876.101.1.10.8.1 | RowfutOspfRoutingEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.10876.101.1.10.8.1.1 | ColumnfutOspfRouteIpAddr | not-accessible | current | IP Address of the route |
| 1.3.6.1.4.1.10876.101.1.10.8.1.2 | ColumnfutOspfRouteIpAddrMask | not-accessible | current | IP Address Mask of the route |
| 1.3.6.1.4.1.10876.101.1.10.8.1.3 | ColumnfutOspfRouteIpTos | not-accessible | current | IP TOS of the route |
| 1.3.6.1.4.1.10876.101.1.10.8.1.4 | ColumnfutOspfRouteIpNextHop | not-accessible | current | IP Next Hop of the route |
| 1.3.6.1.4.1.10876.101.1.10.8.1.5 | ColumnfutOspfRouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.10876.101.1.10.8.1.6 | ColumnfutOspfRouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.10876.101.1.10.8.1.7 | ColumnfutOspfRouteCost | read-only | current | It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost… |
| 1.3.6.1.4.1.10876.101.1.10.8.1.8 | ColumnfutOspfRouteType2Cost | read-only | current | Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS i… |
| 1.3.6.1.4.1.10876.101.1.10.8.1.9 | ColumnfutOspfRouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.10876.101.1.10.9 | TablefutOspfSecIfTable | not-accessible | current | A table of Secondary IP Address information. |
| 1.3.6.1.4.1.10876.101.1.10.9.1 | RowfutOspfSecIfEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.10876.101.1.10.9.1.1 | ColumnfutOspfPrimIpAddr | not-accessible | current | Primary Interface IP Address. |
| 1.3.6.1.4.1.10876.101.1.10.9.1.2 | ColumnfutOspfPrimAddresslessIf | not-accessible | current | Primary Interface Addressless Index. |
| 1.3.6.1.4.1.10876.101.1.10.9.1.3 | ColumnfutOspfSecIpAddr | not-accessible | current | Secondary Interface IP Address. |
| 1.3.6.1.4.1.10876.101.1.10.9.1.4 | ColumnfutOspfSecIpAddrMask | not-accessible | current | Secondary Interface IP Address Mask. |
| 1.3.6.1.4.1.10876.101.1.10.9.1.5 | ColumnfutOspfSecIfStatus | read-write | current | This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implem… |
| 1.3.6.1.4.1.10876.101.1.10.10 | TablefutOspfAreaAggregateTable | not-accessible | current | Supports configuration of External Tag for Type-7 Address ranges configured. |
| 1.3.6.1.4.1.10876.101.1.10.10.1 | RowfutOspfAreaAggregateEntry | not-accessible | current | Supports configuration of External Tag for Type-7 Address ranges configured. |
| 1.3.6.1.4.1.10876.101.1.10.10.1.1 | ColumnfutOspfAreaAggregateAreaID | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.10876.101.1.10.10.1.2 | ColumnfutOspfAreaAggregateLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.10876.101.1.10.10.1.3 | ColumnfutOspfAreaAggregateNet | not-accessible | current | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.10876.101.1.10.10.1.4 | ColumnfutOspfAreaAggregateMask | not-accessible | current | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.10876.101.1.10.10.1.5 | ColumnfutOspfAreaAggregateExternalTag | read-create | current | A 32-bit field attached to each external route. This is not used by OSPF protocol itself. It may be used to communicate information between AS boundary routers… |
| 1.3.6.1.4.1.10876.101.1.10.11 | TablefutOspfAsExternalAggregationTable | not-accessible | current | Indicates whether for the specified address range Type-7/Type-5 LSA will be aggregated or not generated. |
| 1.3.6.1.4.1.10876.101.1.10.11.1 | RowfutOspfAsExternalAggregationEntry | not-accessible | current | Supports configuration of Type-5,Type-7 Address Range specifying whether for the configured range, Type-5,Type-7 LSA will be generated or not, and if generated… |
| 1.3.6.1.4.1.10876.101.1.10.11.1.1 | ColumnfutOspfAsExternalAggregationNet | not-accessible | current | The IP address of the Net indicated by the range. |
| 1.3.6.1.4.1.10876.101.1.10.11.1.2 | ColumnfutOspfAsExternalAggregationMask | not-accessible | current | The subnet mask that pertains to the range. |
| 1.3.6.1.4.1.10876.101.1.10.11.1.3 | ColumnfutOspfAsExternalAggregationAreaId | not-accessible | current | Refer to description in futOspfAsExternalAggregationEffect. |
| 1.3.6.1.4.1.10876.101.1.10.11.1.4 | ColumnfutOspfAsExternalAggregationEffect | read-create | current | Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to allowAll (3) and associated areaId is 0.0.0.0 aggregat… |
| 1.3.6.1.4.1.10876.101.1.10.11.1.5 | ColumnfutOspfAsExternalAggregationTranslation | read-create | current | This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range. |
| 1.3.6.1.4.1.10876.101.1.10.11.1.6 | ColumnfutOspfAsExternalAggregationStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.10876.101.1.10.12 | NodefutOspfOpaqueLSAGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.12.1 | NodefutOspfOpaqueLSAGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.12.1.1 | ScalarfutOspfOpaqueOption | read-write | current | Indicates whether router is Opaque-Capable or not |
| 1.3.6.1.4.1.10876.101.1.10.12.1.2 | ScalarfutOspfType11LsaCount | read-only | current | The number of LS type 11 link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.10876.101.1.10.12.1.3 | ScalarfutOspfType11LsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the Type 11 link-state advertisements con- tained in the link-state database. This sum can be used to determine … |
| 1.3.6.1.4.1.10876.101.1.10.12.1.4 | ScalarfutOspfAreaIDValid | read-write | current | Indicates whether an application is expected to provide the AreaId, while generating a type-10 opaque LSA. This value will be true if an application can provid… |
| 1.3.6.1.4.1.10876.101.1.10.12.2 | TablefutOspfOpaqueInterfaceTable | not-accessible | current | Information describing the count and checksum of the Type9 LSAs. |
| 1.3.6.1.4.1.10876.101.1.10.12.2.1 | RowfutOspfOpaqueInterfaceEntry | not-accessible | current | Information describing the Type 9 LSAs Count and Checksums. |
| 1.3.6.1.4.1.10876.101.1.10.12.2.1.1 | ColumnfutOspfOpaqueType9LsaCount | read-only | current | The total number of TYPE 9 Opaque link-state advertisements. |
| 1.3.6.1.4.1.10876.101.1.10.12.2.1.2 | ColumnfutOspfOpaqueType9LsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state ad- vertisements' TYPE9 Opaque LS checksums.The sum change in a router's link state data-base, and to compare the lin… |
| 1.3.6.1.4.1.10876.101.1.10.12.3 | TablefutOspfType9LsdbTable | not-accessible | current | The OSPF Process's TYPE9 Link State Database. |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1 | RowfutOspfType9LsdbEntry | not-accessible | current | A single Type 9 Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.1 | ColumnfutOspfType9LsdbIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.2 | ColumnfutOspfType9LsdbOpaqueType | not-accessible | current | The Opaque type of the LSA. |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.3 | ColumnfutOspfType9LsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing the Opaque Type and Opaque ID. |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.4 | ColumnfutOspfType9LsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.5 | ColumnfutOspfType9LsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.6 | ColumnfutOspfType9LsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.7 | ColumnfutOspfType9LsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.1.10.12.3.1.8 | ColumnfutOspfType9LsdbAdvertisement | read-only | current | The entire TYPE9 Opaque Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.1.10.12.4 | TablefutOspfType11LsdbTable | not-accessible | current | The OSPF Process's TYPE11 Links State Database. |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1 | RowfutOspfType11LsdbEntry | not-accessible | current | A single TYPE11 Opaque Link State Advertisement. |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1.1 | ColumnfutOspfType11LsdbOpaqueType | not-accessible | current | The Opaquetype of the link state advertisement. |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1.2 | ColumnfutOspfType11LsdbLsid | not-accessible | current | The Link State ID identifies the opaque type and the opaque ID of the received Opaque LSA for an application. |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1.3 | ColumnfutOspfType11LsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1.4 | ColumnfutOspfType11LsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1.5 | ColumnfutOspfType11LsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1.6 | ColumnfutOspfType11LsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.10876.101.1.10.12.4.1.7 | ColumnfutOspfType11LsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.10876.101.1.10.12.5 | TablefutOspfAppInfoDbTable | not-accessible | current | This table maintains information related to application statistics. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1 | RowfutOspfAppInfoDbEntry | not-accessible | current | A single Application's statistical Information. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.1 | ColumnfutOspfAppInfoDbAppid | not-accessible | current | The Application's ID. Each Application has a unique Appid associated with it. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.2 | ColumnfutOspfAppInfoDbOpaqueType | read-only | current | The OpaqueType of the LSA the application can generate or receive. Each Application can register only for a single OpaqueType. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.3 | ColumnfutOspfAppInfoDbLsaTypesSupported | read-only | current | The LSA Types the application can generate is indicated by a BITMASK.The BITMASK and the interpretation of the types supported is given as below:- BitMask Type… |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.4 | ColumnfutOspfAppInfoDbType9Gen | read-only | current | The number of Type 9 LSAs generated by the application. This field is invalid if the application does not support the generation of Type9 LSAs. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.5 | ColumnfutOspfAppInfoDbType9Rcvd | read-only | current | The number of Type 9 LSAs received by the application. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.6 | ColumnfutOspfAppInfoDbType10Gen | read-only | current | The number of Type 10 LSAs generated by the application. This field is invalid if the application does not support the generation of Type10 LSAs. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.7 | ColumnfutOspfAppInfoDbType10Rcvd | read-only | current | The number of Type 10 LSAs received by the application. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.8 | ColumnfutOspfAppInfoDbType11Gen | read-only | current | The number of Type 11 LSAs generated by the application. This field is invalid if the application does not support the generation of Type11 LSAs. |
| 1.3.6.1.4.1.10876.101.1.10.12.5.1.9 | ColumnfutOspfAppInfoDbType11Rcvd | read-only | current | The number of Type 11 LSAs received by the application. |
| 1.3.6.1.4.1.10876.101.1.10.13 | NodefutospfRRDGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.13.1 | NodefutospfRRDGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.13.1.1 | ScalarfutOspfRRDStatus | read-write | current | This MIB object enables/disables OSPF to participate in Route Redistribution. If set to enabled, OSPF will start advertising the routes learned by other protoc… |
| 1.3.6.1.4.1.10876.101.1.10.13.1.2 | ScalarfutOspfRRDSrcProtoMaskEnable | read-write | current | The bit mask of source protocols from which routes are imported to OSPF. Bit 1, if set, indicates that local routes are redistributed into OSPF. (value = 2) Bi… |
| 1.3.6.1.4.1.10876.101.1.10.13.1.3 | ScalarfutOspfRRDSrcProtoMaskDisable | read-write | current | The bit mask of source protocols from which redistribution to OSPF is disabled. Bit 1, if set, indicates that local routes are not redistributed into OSPF. (va… |
| 1.3.6.1.4.1.10876.101.1.10.13.1.4 | ScalarfutOspfRRDRouteMapEnable | read-write | current | Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value. |
| 1.3.6.1.4.1.10876.101.1.10.13.2 | TablefutOspfRRDRouteConfigTable | not-accessible | current | A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM. |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1 | RowfutOspfRRDRouteConfigEntry | not-accessible | current | Information describing the configuration of single route entry. |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1.1 | ColumnfutOspfRRDRouteDest | not-accessible | current | Ip Address of the Destination route. |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1.2 | ColumnfutOspfRRDRouteMask | not-accessible | current | Mask of the Destination route. |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1.3 | ColumnfutOspfRRDRouteMetric | read-write | current | The Metric value applied to the route before it is adv. into the OSPF Domain. |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1.4 | ColumnfutOspfRRDRouteMetricType | read-write | current | The Metric Type applied to the route before it is adv. into the OSPF Domain |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1.5 | ColumnfutOspfRRDRouteTagType | read-write | current | The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the futospfRRD… |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1.6 | ColumnfutOspfRRDRouteTag | read-write | current | The Route Tag in case the user configures a Manual option for the tags. |
| 1.3.6.1.4.1.10876.101.1.10.13.2.1.7 | ColumnfutOspfRRDRouteStatus | read-create | current | The variable displays the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.10876.101.1.10.14 | TablefutOspfVirtNbrTable | not-accessible | current | A table of virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.1.10.14.1 | RowfutOspfVirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.10876.101.1.10.14.1.1 | ColumnfutOspfVirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.14.1.2 | ColumnfutOspfVirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.14.1.3 | ColumnfutOspfVirtNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.15 | NodefutospfDistInOutRouteMap | |||
| 1.3.6.1.4.1.10876.101.1.10.15.1 | TablefutOspfDistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.10876.101.1.10.15.1.1 | RowfutOspfDistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.10876.101.1.10.15.1.1.1 | ColumnfutOspfDistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.10876.101.1.10.15.1.1.3 | ColumnfutOspfDistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.10876.101.1.10.15.1.1.4 | ColumnfutOspfDistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.10876.101.1.10.15.1.1.5 | ColumnfutOspfDistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.10876.101.1.10.16 | NodefutospfPreferenceGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.16.1 | ScalarfutOspfPreferenceValue | read-write | current | Preference value for OSPF routes. Use '0' to set default value |
| 1.3.6.1.4.1.10876.101.1.10.17 | TablefutOspfIfAuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.10.17.1 | RowfutOspfIfAuthEntry | not-accessible | current | The OSPF Interface Authentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.10.17.1.1 | ColumnfutOspfIfAuthIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.10876.101.1.10.17.1.2 | ColumnfutOspfIfAuthAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.10876.101.1.10.17.1.3 | ColumnfutOspfIfAuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.17.1.4 | ColumnfutOspfIfAuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.17.1.5 | ColumnfutOspfIfAuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed … |
| 1.3.6.1.4.1.10876.101.1.10.17.1.6 | ColumnfutOspfIfAuthKeyStartGenerate | read-write | current | The time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:… |
| 1.3.6.1.4.1.10876.101.1.10.17.1.7 | ColumnfutOspfIfAuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:5… |
| 1.3.6.1.4.1.10876.101.1.10.17.1.8 | ColumnfutOspfIfAuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed a… |
| 1.3.6.1.4.1.10876.101.1.10.17.1.9 | ColumnfutOspfIfAuthKeyStatus | read-write | current | Identifies the status of the key. NOTE:invalid (2) currently not supported |
| 1.3.6.1.4.1.10876.101.1.10.18 | TablefutOspfVirtIfAuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for cryptographic Authentication. |
| 1.3.6.1.4.1.10876.101.1.10.18.1 | RowfutOspfVirtIfAuthEntry | not-accessible | current | The OSPF Interface Authentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.10876.101.1.10.18.1.1 | ColumnfutOspfVirtIfAuthAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0. |
| 1.3.6.1.4.1.10876.101.1.10.18.1.2 | ColumnfutOspfVirtIfAuthNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.10876.101.1.10.18.1.3 | ColumnfutOspfVirtIfAuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.18.1.4 | ColumnfutOspfVirtIfAuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.10876.101.1.10.18.1.5 | ColumnfutOspfVirtIfAuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed … |
| 1.3.6.1.4.1.10876.101.1.10.18.1.6 | ColumnfutOspfVirtIfAuthKeyStartGenerate | read-write | current | The time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:… |
| 1.3.6.1.4.1.10876.101.1.10.18.1.7 | ColumnfutOspfVirtIfAuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 9999-12-31,23:5… |
| 1.3.6.1.4.1.10876.101.1.10.18.1.8 | ColumnfutOspfVirtIfAuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed a… |
| 1.3.6.1.4.1.10876.101.1.10.18.1.9 | ColumnfutOspfVirtIfAuthKeyStatus | read-write | current | Identifies the status of the key. NOTE: invalid (2) is currently not supported |
| 1.3.6.1.4.1.10876.101.1.10.19 | TablefutOspfIfCryptoAuthTable | not-accessible | current | A table which holds the crypto authentication type.This must be configured for SHA-1 / SHA-2 authentication to be enabled. |
| 1.3.6.1.4.1.10876.101.1.10.19.1 | RowfutOspfIfCryptoAuthEntry | not-accessible | current | Describes the cryptographic authentication. |
| 1.3.6.1.4.1.10876.101.1.10.19.1.1 | ColumnfutOspfIfCryptoAuthType | read-write | current | Crypto authentication type to be used on the interface. This object should be used to set SHA authentication along with ospfIfAuthType in stdospf.mib |
| 1.3.6.1.4.1.10876.101.1.10.20 | TablefutOspfVirtIfCryptoAuthTable | not-accessible | current | A table which holds the crypto authentication type. |
| 1.3.6.1.4.1.10876.101.1.10.20.1 | RowfutOspfVirtIfCryptoAuthEntry | not-accessible | current | Describes the cryptographic authentication. |
| 1.3.6.1.4.1.10876.101.1.10.20.1.1 | ColumnfutOspfVirtIfCryptoAuthType | read-write | current | Crypto authentication type to be used on the interface This object should be used to set SHA authentication along with ospfVirtIfAuthType in stdospf.mib |
| 1.3.6.1.4.1.10876.101.1.10.100 | NodefutOspfTestGroup | |||
| 1.3.6.1.4.1.10876.101.1.10.101 | NodefutOspfNotification | |||
| 1.3.6.1.4.1.10876.101.1.10.101.0 | NodefutOspfTraps | |||
| 1.3.6.1.4.1.10876.101.1.10.101.0.1 | NotificationfutOspfRestartStatusChange | current | An futOspfRestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when the … | |
| 1.3.6.1.4.1.10876.101.1.10.101.0.2 | NotificationfutOspfNbrRestartHelperStatusChange | current | An futOspfNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should be g… | |
| 1.3.6.1.4.1.10876.101.1.10.101.0.3 | NotificationfutOspfVirtNbrRestartHelperStatusChange | current | An futOspfVirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This trap… | |
| 1.3.6.1.4.1.10876.101.1.10.101.0.4 | NotificationfutOspfHotStandbyEventTrap | current | A notification is sent to the management entity whenever there is a state change in the OSPF hotstandby Module. | |
| 1.3.6.1.4.1.10876.101.1.10.102 | NodefutOspfOasGroup |