SYNOPTICS-ETHERNET-MIB
378 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| SYNOPTICS-COMMON-MIB | s3000Ethernet S3ModuleType |
| SYNOPTICS-ROOT-MIB | SnpxBackplaneType SnpxChassisType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.3.2.1 | Nodes3000EnetConcentrator | |||
| 1.3.6.1.4.1.45.1.3.2.1.1 | Scalars3EnetConcRetimingStatus | read-write | mandatory | Does this concentrator have retiming turned on. Writing a 1 will turn off retiming and writing a 2 will turn on retiming. This will change the active state of … |
| 1.3.6.1.4.1.45.1.3.2.1.2 | Scalars3EnetConcFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the concentrator. This does not include frames received with a frame-too-long, runt, FCS, or … |
| 1.3.6.1.4.1.45.1.3.2.1.3 | Scalars3EnetConcOctetsRxOk | read-only | mandatory | Contains a count of data and padding octets in frames that are successfully received by the concentrator. This does not include frames received with a frame-to… |
| 1.3.6.1.4.1.45.1.3.2.1.4 | Scalars3EnetConcMcastFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the concentrator and are directed to an active non-broadcast group address. This does not inc… |
| 1.3.6.1.4.1.45.1.3.2.1.5 | Scalars3EnetConcBcastFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the concentrator and are directed to the broadcast group address. This does not include frame… |
| 1.3.6.1.4.1.45.1.3.2.1.6 | Scalars3EnetConcColls | read-only | mandatory | This contains a count of the collisions at the concentrator level. For NMM+ this is a true counter. For other NMMs this is a summation of all the port level co… |
| 1.3.6.1.4.1.45.1.3.2.1.7 | Scalars3EnetConcTooLongErrors | read-only | mandatory | This contains a count of frames that are received by the concentrator and exceed the maximum permitted frame size. This counter is incremented when the frameTo… |
| 1.3.6.1.4.1.45.1.3.2.1.8 | Scalars3EnetConcRuntErrors | read-only | mandatory | This contains a count of frames received by the concentrator that are less than the minimum permitted frame size and have a good FCS. |
| 1.3.6.1.4.1.45.1.3.2.1.9 | Scalars3EnetConcFragErrors | read-only | mandatory | This contains a count of frames received by the concentrator that are less than the minimum permitted frame size and have a bad FCS or alignment error. |
| 1.3.6.1.4.1.45.1.3.2.1.10 | Scalars3EnetConcAlignErrors | read-only | mandatory | This contains a count of frames received by the concentrator that are not an integral number of octets in length and do not pass the FCS check. This counter is… |
| 1.3.6.1.4.1.45.1.3.2.1.11 | Scalars3EnetConcFcsErrors | read-only | mandatory | This contains a count of frames received by the concentrator that are an integral number of octets in length that do not pass the FCS check. This counter is in… |
| 1.3.6.1.4.1.45.1.3.2.1.12 | Scalars3EnetConcLateCollErrors | read-only | mandatory | This contains a total concentrator count of the late collisions. For NMM+ this is a true counter. For other NMMs this is a summation of all the port level late… |
| 1.3.6.1.4.1.45.1.3.2.1.13 | Scalars3EnetConcSecureStatus | read-write | mandatory | This s3EnetConcSecureStatus object indicates whether the security features (both allowed nodes and LattisSecure) for the concentrator are active or inactive. I… |
| 1.3.6.1.4.1.45.1.3.2.1.14 | Scalars3EnetConcAuthAction | read-write | mandatory | If s3EnetConcSecureStatus is concSecureOn(2) and a violation occurs, then the action specified by this object will take place. On a partition, only the port th… |
| 1.3.6.1.4.1.45.1.3.2.1.15 | Scalars3EnetConcSecurityLock | read-only | mandatory | If s3EnetConcSecurityLock is locked(2), the agent will refuse all requests to modify the 'security configuration' (defined below) by returning a BadValue retur… |
| 1.3.6.1.4.1.45.1.3.2.1.16 | Scalars3EnetConcEnetChan | read-only | mandatory | Identifies the channel to which this NMM is currently monitoring. |
| 1.3.6.1.4.1.45.1.3.2.2 | Nodes3000EnetBoard | |||
| 1.3.6.1.4.1.45.1.3.2.2.1 | Tables3EnetBoardTable | not-accessible | mandatory | A table of board-related objects. The number of entries is given by the number of Ethernet host module and network management module boards that are contained … |
| 1.3.6.1.4.1.45.1.3.2.2.1.1 | Rows3EnetBoardEntry | not-accessible | mandatory | A table containing objects about Ethernet boards which are currently plugged into the 3000 chassis. |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.1 | Columns3EnetBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.2 | Columns3EnetBoardType | read-only | obsolete | See s3SlotModuleType |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.3 | Columns3EnetBoardHwVer | read-only | obsolete | See s3CommonBoardHwVer |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.4 | Columns3EnetBoardStatus | read-only | obsolete | See s3CommonBoardStatus |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.5 | Columns3EnetBoardReset | read-write | obsolete | See s3CommonBoardReset |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.6 | Columns3EnetBoardPartStatus | read-write | obsolete | See s3CommonBoardPartStatus |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.7 | Columns3EnetBoardNmCntlStatus | read-only | obsolete | See s3CommonBoardCntlStatus |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.8 | Columns3EnetBoardPsStatus | read-only | obsolete | See s3CommonBoardPsStatus |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.9 | Columns3EnetBoardFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the board. This does not include frames received with a frame-too-long, runt, FCS, or alignme… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.10 | Columns3EnetBoardOctetsRxOk | read-only | mandatory | Contains a count of data and padding octets in frames that are successfully received by the board. This does not include frames received with a frame-too-long,… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.11 | Columns3EnetBoardMcastFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the board and are directed to an active non-broadcast group address. This does not include fr… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.12 | Columns3EnetBoardBcastFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the board and are directed to the broadcast group address. This does not include frames recei… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.13 | Columns3EnetBoardColls | read-only | mandatory | This contains a board level count of collisions. For NMM+ this is a true counter. For other NMMs this is a summation of all the port level collision 'flags' fo… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.14 | Columns3EnetBoardTooLongErrors | read-only | mandatory | This contains a count of frames that are received by the board and exceed the maximum permitted frame size. This counter is incremented when the frameTooLong e… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.15 | Columns3EnetBoardRuntErrors | read-only | mandatory | This contains a count of frames received by the board that are less than the minimum permitted frame size and have a good FCS. |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.16 | Columns3EnetBoardAlignErrors | read-only | mandatory | This contains a count of frames received by the board that are not an integral number of octets in length and do not pass the FCS check. This counter is increm… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.17 | Columns3EnetBoardFcsErrors | read-only | mandatory | This contains a count of frames received by the board that are an integral number of octets in length that do not pass the FCS check. This counter is increment… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.18 | Columns3EnetBoardLateCollErrors | read-only | mandatory | This contains a count of the board level late collisions. For NMM+ this is a true counter. For other NMMs this is a summation of all the port level late collis… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.19 | Columns3EnetBoardAuthStatus | read-write | mandatory | This object is only used if s3EnetConcSecureStatus is set to slotCheckOn(4). In this case, turning this object on(2) means that any node that is heard on this … |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.20 | Columns3EnetBoardAuthAction | read-write | mandatory | If s3EnetConcSecureStatus is slotCheckOn(4) and s3EnetBoardAuthStatus is on(2) and an authorized nodes violation occurs on the board, then the action specified… |
| 1.3.6.1.4.1.45.1.3.2.2.1.1.21 | Columns3EnetBoardUpStamp | read-only | mandatory | The time ( in hundredths of a second) that the board was first seen as a member of this NMM's segment. |
| 1.3.6.1.4.1.45.1.3.2.2.2 | Nodes3000EnetLocBridge | |||
| 1.3.6.1.4.1.45.1.3.2.2.2.1 | Tables3EnetLocBridgeSlotTable | not-accessible | mandatory | A table of Local Bridge Board entries. The number of entries is determined by the Concentrator Slot Configuration Table. Only those entries that are Ethernet l… |
| 1.3.6.1.4.1.45.1.3.2.2.2.1.1 | Rows3EnetLocBridgeEntry | not-accessible | mandatory | A table containing objects about Boards which are local bridges that are currently plugged into the 3000 chassis. |
| 1.3.6.1.4.1.45.1.3.2.2.2.1.1.1 | Columns3EnetLocBridgeIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.2.2.1.1.2 | Columns3EnetLocBridgeDescr | read-only | mandatory | Description of the local bridge board. |
| 1.3.6.1.4.1.45.1.3.2.2.2.1.1.3 | Columns3EnetLocBridgePortCount | read-only | mandatory | Number of ports that are on the local bridge board. |
| 1.3.6.1.4.1.45.1.3.2.2.2.1.1.4 | Columns3EnetLocBridgeDiagSts | read-only | mandatory | Latest Diagnostic LED Status that has been recorded. |
| 1.3.6.1.4.1.45.1.3.2.2.2.1.1.5 | Columns3EnetLocBridgeBootSts | read-only | mandatory | The current status of the board as it relates to rebooting. |
| 1.3.6.1.4.1.45.1.3.2.2.2.1.1.6 | Columns3EnetLocBridgeStandbySts | read-only | mandatory | This status says whether the local bridge is active or in standby mode. |
| 1.3.6.1.4.1.45.1.3.2.2.2.2 | Tables3EnetLocBridgePortTable | not-accessible | mandatory | A table of Port entries that are part of a local bridge. The number of entries is determined by knowing the number of local bridge boards that are installed by… |
| 1.3.6.1.4.1.45.1.3.2.2.2.2.1 | Rows3EnetLocBridgePortEntry | not-accessible | mandatory | A table containing objects about the ports of the local bridges that are currently plugged into the 3000 chassis. |
| 1.3.6.1.4.1.45.1.3.2.2.2.2.1.1 | Columns3EnetLocBridgePortSlotIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.2.2.2.1.2 | Columns3EnetLocBridgePortIndex | read-only | mandatory | A unique value for each port. Its value ranges between 1 and 12. The value for each port must remain constant at least from one re-initialization of the entity… |
| 1.3.6.1.4.1.45.1.3.2.2.2.2.1.3 | Columns3EnetLocBridgePortMdaId | read-only | mandatory | Medium dependent ID for the port. See s3SlotModuleMdaId in the SynOptics Common MIB. |
| 1.3.6.1.4.1.45.1.3.2.2.2.2.1.4 | Columns3EnetLocBridgePortIf | read-only | mandatory | Bridge interface types. |
| 1.3.6.1.4.1.45.1.3.2.2.2.2.1.5 | Columns3EnetLocBridgePortDescr | read-only | mandatory | A text description of the port. |
| 1.3.6.1.4.1.45.1.3.2.2.2.2.1.6 | Columns3EnetLocBridgePortOpSts | read-only | mandatory | Operating status of the port. |
| 1.3.6.1.4.1.45.1.3.2.2.3 | Nodes3000EnetRemBridge | |||
| 1.3.6.1.4.1.45.1.3.2.2.3.1 | Tables3EnetRemBridgeSlotTable | not-accessible | mandatory | A table of Remote Bridge Board entries. The number of entries is determined by the Concentrator Slot Configuration Table. Only those entries that are Ethernet … |
| 1.3.6.1.4.1.45.1.3.2.2.3.1.1 | Rows3EnetRemBridgeEntry | not-accessible | mandatory | A table containing objects about Boards which are remote bridges that are currently plugged into the 3000 chassis. |
| 1.3.6.1.4.1.45.1.3.2.2.3.1.1.1 | Columns3EnetRemBridgeIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.2.3.1.1.2 | Columns3EnetRemBridgeDescr | read-only | mandatory | Description of the board. |
| 1.3.6.1.4.1.45.1.3.2.2.3.1.1.3 | Columns3EnetRemBridgePortCount | read-only | mandatory | Number of ports that are on the board. |
| 1.3.6.1.4.1.45.1.3.2.2.3.1.1.4 | Columns3EnetRemBridgeDiagSts | read-only | mandatory | Latest Diagnostic LED Status that has been recorded. |
| 1.3.6.1.4.1.45.1.3.2.2.3.1.1.5 | Columns3EnetRemBridgeBootSts | read-only | mandatory | The current status of the board as it relates to rebooting. |
| 1.3.6.1.4.1.45.1.3.2.2.3.1.1.6 | Columns3EnetRemBridgeStandbySts | read-only | mandatory | This status says whether the remote bridge is active or in standby mode. |
| 1.3.6.1.4.1.45.1.3.2.2.3.2 | Tables3EnetRemBridgePortTable | not-accessible | mandatory | A table of Port entries that are part of a remote bridge. The number of entries is determined by knowing the number of remote bridge boards that are installed … |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1 | Rows3EnetRemBridgePortEntry | not-accessible | mandatory | A table containing objects about the ports of the remote bridges that are currently plugged into the 3000 chassis. |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.1 | Columns3EnetRemBridgePortSlotIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.2 | Columns3EnetRemBridgePortIndex | read-only | mandatory | A unique value for each port. Its value ranges between 1 and 12. The value for each port must remain constant at least from one re-initialization of the entity… |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.3 | Columns3EnetRemBridgePortMdaId | read-only | mandatory | Medium dependent ID for the port. |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.4 | Columns3EnetRemBridgePortDescr | read-only | mandatory | A text description of the port. |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.5 | Columns3EnetRemBridgePortOpSts | read-only | mandatory | Operating status of the port. |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.6 | Columns3EnetRemBridgePortRdySnd | read-only | mandatory | Ready to send status of the port. |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.7 | Columns3EnetRemBridgePortClrSnd | read-only | mandatory | Clear to send status of the port. |
| 1.3.6.1.4.1.45.1.3.2.2.3.2.1.8 | Columns3EnetRemBridgePortCarDt | read-only | mandatory | Carrier detect status of the port. |
| 1.3.6.1.4.1.45.1.3.2.2.4 | Nodes3000EnetRouter | |||
| 1.3.6.1.4.1.45.1.3.2.2.4.1 | Tables3EnetRouterSlotTable | not-accessible | mandatory | A table of Router Board entries. The number of entries is determined by the Concentrator Slot Configuration Table. Only those entries that are Ethernet routers… |
| 1.3.6.1.4.1.45.1.3.2.2.4.1.1 | Rows3EnetRouterEntry | not-accessible | mandatory | A table containing objects about Boards which are routers that are currently plugged into the 3000 chassis. |
| 1.3.6.1.4.1.45.1.3.2.2.4.1.1.1 | Columns3EnetRouterIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.2.4.1.1.2 | Columns3EnetRouterDescr | read-only | mandatory | Description of the router board. |
| 1.3.6.1.4.1.45.1.3.2.2.4.1.1.3 | Columns3EnetRouterDiagSts | read-only | mandatory | Latest Diagnostic LED Status that has been recorded. |
| 1.3.6.1.4.1.45.1.3.2.2.4.1.1.4 | Columns3EnetRouterStandbySts | read-only | mandatory | This status says whether the router is active or in standby mode. |
| 1.3.6.1.4.1.45.1.3.2.2.5 | Tables3EnetCommonBoardTable | not-accessible | mandatory | Information maintained for each Ethernet board. The information can be retrieved for any Ethernet board, even if the board is not on the same backplane Etherne… |
| 1.3.6.1.4.1.45.1.3.2.2.5.1 | Rows3EnetCommonBoardEntry | not-accessible | mandatory | There is one entry per Ethernet board in this table. |
| 1.3.6.1.4.1.45.1.3.2.2.5.1.1 | Columns3EnetCommonBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.2.5.1.2 | Columns3EnetCommonBoardEnetAB | read-write | mandatory | The channel to which the board is connected. The primary use of this object is for providing realtime switching of boards between channel A and channel B. It i… |
| 1.3.6.1.4.1.45.1.3.2.2.5.1.3 | Columns3EnetCommonBoardChanSwitch | read-only | mandatory | The agent will return switchCapable(2) for any Ethernet host board which can be switched between Ethernet channels. The value notSwitchCapable(3) indicates tha… |
| 1.3.6.1.4.1.45.1.3.2.2.5.1.4 | Columns3EnetCommonBoardRedund | read-only | mandatory | The agent will return redundCapable(2) for any Ethernet host board which can provide hardware and/or software controlled redundancy on the port level. The valu… |
| 1.3.6.1.4.1.45.1.3.2.3 | Nodes3000EnetPort | |||
| 1.3.6.1.4.1.45.1.3.2.3.1 | Tables3EnetPortTable | not-accessible | mandatory | A list of port entries. The number of entries is given by learning the type of board from the information in the s3ChassisSlotConfigTable. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1 | Rows3EnetPortEntry | not-accessible | mandatory | A table containing objects about the Ports of each board plugged into the 3000 chassis which are on the same backplane Ethernet segment as the reporting NMM. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.1 | Columns3EnetPortBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one reinitialization of the entit… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.2 | Columns3EnetPortIndex | read-only | mandatory | A unique value for each port. Its value is dependent on the board type. The value for each port must remain constant at least from one re-initialization of the… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.3 | Columns3EnetPortLinkStatus | read-only | deprecated | Tells whether the port is receiving link status. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.4 | Columns3EnetPortPartStatus | read-write | deprecated | This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port. If a timed … |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.5 | Columns3EnetPortJabberStatus | read-only | mandatory | Tells whether the DTE connected to the Port is jabbering or not. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.6 | Columns3EnetPortFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the port. This does not include frames received with a frame-too-long, runt, FCS, or alignmen… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.7 | Columns3EnetPortOctetsRxOk | read-only | mandatory | Contains a count of data and padding octets in frames that are successfully received by the port. This does not include frames received with a frame-too-long, … |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.8 | Columns3EnetPortMcastFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the port and are directed to an active non-broadcast group address. This does not include fra… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.9 | Columns3EnetPortBcastFrmsRxOk | read-only | mandatory | This contains a count of frames that are successfully received by the port and are directed to the broadcast group address. This does not include frames receiv… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.10 | Columns3EnetPortColls | read-only | mandatory | This contains a count of collisions. For NMM+ this is a true counter. For other NMMs this is a count of the collision flags. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.11 | Columns3EnetPortTooLongErrors | read-only | mandatory | This contains a count of frames that are received by the port and exceed the maximum permitted frame size. This counter is incremented when the frameTooLong er… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.12 | Columns3EnetPortRuntErrors | read-only | mandatory | This contains a count of frames received by the port that are less than the minimum permitted frame size and have a good FCS. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.13 | Columns3EnetPortAlignErrors | read-only | mandatory | This contains a count of frames received by the port that are not an integral number of octets in length and do not pass the FCS check. This counter is increme… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.14 | Columns3EnetPortFcsErrors | read-only | mandatory | This contains a count of frames received the port that are an integral number of octets in length that do not pass the FCS check. This counter is incremented w… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.15 | Columns3EnetPortLateCollErrors | read-only | mandatory | This contains a count of late collisions. For NMM+ this is a true counter. For other NMMs this is a count of the late collision flags. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.16 | Columns3EnetPortAuthStatus | read-write | mandatory | This object is only used if s3EnetConcSecureStatus is set to portCheckOn(3) or if the port is on a LattisSecure Host Module. In this case, turning this object … |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.17 | Columns3EnetPortAuthAction | read-write | mandatory | If s3EnetConcSecureStatus is portCheckOn(3) or this port is on a LattisSecure Host Module, and s3EnetPortAuthStatus is on(2) and an authorized nodes violation … |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.18 | Columns3EnetPortPartTime | read-write | deprecated | When partitioning the port for a specified time, s3EnetPortPartStatus must be set with timedpartition(4) and this object must be supplied with the duration val… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.19 | Columns3EnetPortType | read-only | deprecated | The media connection type for this port. Note that this object was called s3EnetPortMDIXSwitch in the Ethernet 3.3 and 4.0 MIBs. |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.20 | Columns3EnetPortInterconStatus | read-only | mandatory | This object tells whether the port is connected to a host or to an interconnect (defined to be another NMM that is sending hello messages). The NMM agent will … |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.21 | Columns3EnetPortAddrCollect | read-write | mandatory | This object tells whether the NMM should collect node address information from this port for the Find Nodes, Show Nodes, and Traffic Matrix (NMM+ only) tables.… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.22 | Columns3EnetPortAddrLearnMode | read-write | mandatory | This object indicates whether the port should automatically learn the port address by reading the source address on the incoming packets. This object applies o… |
| 1.3.6.1.4.1.45.1.3.2.3.1.1.23 | Columns3EnetPortTxSecurity | read-write | mandatory | This value of this object is meaningful only when s3EnetConcSecureStatus is not set to concSecureOff(5) (i.e., if security features are activated on the concen… |
| 1.3.6.1.4.1.45.1.3.2.3.2 | Tables3EnetCommonPortTable | not-accessible | mandatory | This table provides a list of port entries. The number of entries is given for any Ethernet board in the concentrator, even if the board is not on the same Eth… |
| 1.3.6.1.4.1.45.1.3.2.3.2.1 | Rows3EnetCommonPortEntry | not-accessible | mandatory | A table containing objects about the ports of each Ethernet board plugged into the 3000-series chassis. |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.1 | Columns3EnetCommonPortBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. The value for each board must remain constant at least from one re-initialization of the enti… |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.2 | Columns3EnetCommonPortIndex | read-only | mandatory | A unique value for each port. Its value is dependent on the board type. |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.3 | Columns3EnetCommonPortLinkStatus | read-only | mandatory | Tells whether the port is receiving link status. |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.4 | Columns3EnetCommonPortPartStatus | read-write | mandatory | This indicates the operational status of the Port. Writing a partition(2) will partition the port indefinitely and enabled(1) will enable the port. If a timed … |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.5 | Columns3EnetCommonPortType | read-only | mandatory | The media connnection type for this port. Note that this object was called s3EnetPortMDIXSwitch in the Ethernet 3.3 and 4.0 MIBs. |
| 1.3.6.1.4.1.45.1.3.2.3.2.1.6 | Columns3EnetCommonPortPartTime | read-write | mandatory | When partitioning the port for a specified time, s3EnetCommonPortPartStatus must be set with timedPartition(4) and this object must be supplied with the durati… |
| 1.3.6.1.4.1.45.1.3.2.3.3 | Tables3EnetRedPortTable | not-accessible | mandatory | A table of ports for each 10BASE-FL board with redundancy capability. The number of boards is determined by checking s3EnetCommonBoardRedund having a value of … |
| 1.3.6.1.4.1.45.1.3.2.3.3.1 | Rows3EnetRedPortEntry | not-accessible | mandatory | An entry in the table of ports on boards with redundancy capability. Entries in the table cannot be created or deleted via SNMP. Row modification via SNMP is a… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.1 | Columns3EnetRedPortBoardIndex | read-only | mandatory | The index of the slot containing the board. The value for each board must remain constant at least from one re-initialization of the entity's network managemen… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.2 | Columns3EnetRedPortIndex | read-only | mandatory | The index of the port on the module. |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.3 | Columns3EnetRedPortRedundMode | read-write | mandatory | The redundancy mode of the port. The possible values read, which report the redundancy mode of the port, are: standalone(1)...the port is not in any redundant … |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.4 | Columns3EnetRedPortOperStatus | read-only | mandatory | This object indicates port's redundancy status. The values are: other(1).........none of the following ok(2)............no fault localFault(3)....the local por… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.5 | Columns3EnetRedPortRemoteOperStatus | read-only | mandatory | This object reflects the real time status of the received data from the remote port. A value of snpxFLRemFltCpblPortUp(1) indicates that the remote port is cap… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.6 | Columns3EnetRedPortCompanionSlotNo | read-write | mandatory | The slot number of the other port which is in the redundant pair. In the case of a standalone port, a value of 0 will be returned. Note: This object is only wr… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.7 | Columns3EnetRedPortCompanionPortNo | read-write | mandatory | The port number of the other port which is in the redundant pair. In the case of a standalone port, a value of 0 will be returned. Note: This object is only wr… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.8 | Columns3EnetRedPortSwitchoverStatus | read-write | mandatory | The switchover status of the redundant port pair. The following values can be written: timedSwitchover(2)...Immediately causes the active port to become the st… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.9 | Columns3EnetRedPortSwitchoverTime | read-write | mandatory | The length of time before the ports making up the redundant port pair revert back to their orignal active or standby roles as defined before the timed switchov… |
| 1.3.6.1.4.1.45.1.3.2.3.3.1.10 | Columns3EnetRedPortCapability | read-only | mandatory | The redundancy capability of the port: hwRedOnly(1).........hardware redundancy only. swRedOnly(2).........software redundacy only. notRedunCapable(3)...port n… |
| 1.3.6.1.4.1.45.1.3.2.3.4 | Scalars3EnetRedPortLastChg | read-only | mandatory | The value of sysUptime when the last change in the redundant ports table was observed by the agent. |
| 1.3.6.1.4.1.45.1.3.2.4 | Nodes3000EnetNmm | |||
| 1.3.6.1.4.1.45.1.3.2.4.1 | Scalars3EnetNmmType | read-only | obsolete | See s3AgentType |
| 1.3.6.1.4.1.45.1.3.2.4.2 | Scalars3EnetNmmMdaHwVer | read-only | obsolete | See AgentMdaHwVer |
| 1.3.6.1.4.1.45.1.3.2.4.3 | Scalars3EnetNmmFwVer | read-only | obsolete | See s3AgentFwVer |
| 1.3.6.1.4.1.45.1.3.2.4.4 | Scalars3EnetNmmSwMajorVer | read-only | obsolete | See s3AgentSwMajor |
| 1.3.6.1.4.1.45.1.3.2.4.5 | Scalars3EnetNmmSwMinorVer | read-only | obsolete | See s3AgentSwMinor |
| 1.3.6.1.4.1.45.1.3.2.4.6 | Scalars3EnetNmmStatus | read-only | obsolete | See s3AgentStatus |
| 1.3.6.1.4.1.45.1.3.2.4.7 | Scalars3EnetNmmMode | read-write | obsolete | See s3AgentMode |
| 1.3.6.1.4.1.45.1.3.2.4.8 | Scalars3EnetNmmReset | read-write | obsolete | See s3AgentReset |
| 1.3.6.1.4.1.45.1.3.2.4.9 | Scalars3EnetNmmRestart | read-write | obsolete | See s3AgentRestart |
| 1.3.6.1.4.1.45.1.3.2.4.10 | Scalars3EnetNmmIpAddr | read-write | obsolete | See s3AgentIpAddr |
| 1.3.6.1.4.1.45.1.3.2.4.11 | Scalars3EnetNmmNetMask | read-write | obsolete | See s3AgentNetMask |
| 1.3.6.1.4.1.45.1.3.2.4.12 | Scalars3EnetNmmDefaultGateway | read-write | obsolete | See s3AgentDefaultGateway |
| 1.3.6.1.4.1.45.1.3.2.4.13 | Scalars3EnetNmmFileServerAddr | read-write | obsolete | See s3AgentBootServerAddr |
| 1.3.6.1.4.1.45.1.3.2.4.14 | Scalars3EnetNmmBootFile | read-write | obsolete | See s3AgentBootFile |
| 1.3.6.1.4.1.45.1.3.2.4.15 | Scalars3EnetNmmBootMode | read-write | obsolete | See s3AgentBootMode |
| 1.3.6.1.4.1.45.1.3.2.4.16 | Scalars3EnetNmmWriteEeprom | read-write | obsolete | See s3AgentWriteEeprom |
| 1.3.6.1.4.1.45.1.3.2.4.17 | Scalars3EnetNmmBaudRate | read-only | obsolete | See s3AgentBaudRate |
| 1.3.6.1.4.1.45.1.3.2.4.18 | Scalars3EnetNmmInitString | read-write | obsolete | See s3AgentInitString |
| 1.3.6.1.4.1.45.1.3.2.4.19 | Scalars3EnetNmmLocation | read-write | obsolete | See s3AgentLocation |
| 1.3.6.1.4.1.45.1.3.2.4.20 | Tables3EnetNmmTrapServerTable | not-accessible | obsolete | See s3AgentTrapReceiverTable |
| 1.3.6.1.4.1.45.1.3.2.4.20.1 | Rows3EnetNmmTrapServerEntry | not-accessible | obsolete | See s3AgentTrapReceiverEntry |
| 1.3.6.1.4.1.45.1.3.2.4.20.1.1 | Columns3EnetNmmTrapType | read-write | obsolete | See s3AgentTrapRcvrStatus |
| 1.3.6.1.4.1.45.1.3.2.4.20.1.2 | Columns3EnetNmmTrapServerAddress | read-write | obsolete | See s3AgentTrapRcvrNetAddress |
| 1.3.6.1.4.1.45.1.3.2.4.20.1.3 | Columns3EnetNmmTrapServerComm | read-write | obsolete | See s3AgentTrapRcvrComm |
| 1.3.6.1.4.1.45.1.3.2.4.21 | Scalars3EnetNmmAuthTrap | read-write | obsolete | See s3AgentAuthTrap |
| 1.3.6.1.4.1.45.1.3.2.5 | Nodes3000EnetNode | |||
| 1.3.6.1.4.1.45.1.3.2.5.1 | Tables3EnetShowNodesTable | not-accessible | mandatory | Table containing a list of all of the nodes that have been active during the aging interval that are currently connected to the network through this concentrat… |
| 1.3.6.1.4.1.45.1.3.2.5.1.1 | Rows3EnetShowNodesEntry | not-accessible | mandatory | List of nodes active on the concentrator and the slot and port the nodes are on. |
| 1.3.6.1.4.1.45.1.3.2.5.1.1.1 | Columns3EnetShowNodesSlotIndex | read-only | mandatory | The board number the node is on. Valid entries are 1-12. |
| 1.3.6.1.4.1.45.1.3.2.5.1.1.2 | Columns3EnetShowNodesPortIndex | read-only | mandatory | The port number the node is on. Valid entries are 1-12. |
| 1.3.6.1.4.1.45.1.3.2.5.1.1.3 | Columns3EnetShowNodesMacAddress | read-only | mandatory | This object contains the MAC address (i.e. the Ethernet address) of the node. |
| 1.3.6.1.4.1.45.1.3.2.5.1.1.4 | Columns3EnetShowNodesStatus | read-only | mandatory | The status of the node. Determines whether the node has actively transmitted or not over the last 5 seconds. |
| 1.3.6.1.4.1.45.1.3.2.5.1.1.5 | Columns3EnetShowNodesVendorType | read-only | deprecated | The vendor type of the adapter seen on this port. If the vendor is unknown other(1) should be returned. |
| 1.3.6.1.4.1.45.1.3.2.5.1.1.6 | Columns3EnetShowNodesAuthStatus | read-only | mandatory | The object is used determine how the node was added to this table. If the node was learned by listening to the network then on reads network(2) should be retur… |
| 1.3.6.1.4.1.45.1.3.2.5.2 | Scalars3EnetNodeAgeInterval | read-write | mandatory | The time used for aging of the nodes in tables s3EnetShowNodesTable and s3EnetFindNodesTable. Once a node has completely aged it will be removed from these tab… |
| 1.3.6.1.4.1.45.1.3.2.5.3 | Tables3EnetFindNodesTable | not-accessible | mandatory | Table containing a list of all of the nodes that have been active during the aging interval that are currently connected to the network through this concentrat… |
| 1.3.6.1.4.1.45.1.3.2.5.3.1 | Rows3EnetFindNodesEntry | not-accessible | mandatory | Entry in the table containing the slot, port and MAC address of a node connected to the Ethernet through this concentrator. |
| 1.3.6.1.4.1.45.1.3.2.5.3.1.1 | Columns3EnetFindNodesMacAddress | read-only | mandatory | MAC address of node that this entry in the table is for. |
| 1.3.6.1.4.1.45.1.3.2.5.3.1.2 | Columns3EnetFindNodesSlotIndex | read-only | mandatory | The board that the node is connected through. |
| 1.3.6.1.4.1.45.1.3.2.5.3.1.3 | Columns3EnetFindNodesPortIndex | read-only | mandatory | The port that the node is connected through. |
| 1.3.6.1.4.1.45.1.3.2.5.4 | Tables3EnetAuthNodesTable | not-accessible | mandatory | Table containing a list of MAC addresses and the slot and ports that the MAC address is allowed to be heard on, in case the authorized node feature is turned o… |
| 1.3.6.1.4.1.45.1.3.2.5.4.1 | Rows3EnetAuthNodesEntry | not-accessible | mandatory | Entry in the table containing a MAC address of a node that is allowed on the ethernet through this concentrator. |
| 1.3.6.1.4.1.45.1.3.2.5.4.1.1 | Columns3EnetAuthNodesMacAddr | read-write | mandatory | MAC address of node that this entry in the table is for. |
| 1.3.6.1.4.1.45.1.3.2.5.4.1.2 | Columns3EnetAuthNodesSlotIndex | read-write | mandatory | The board that the node is allowed to be heard through. If this object is 0, then the MAC address is allowed on any board in the concentrator. In this case s3E… |
| 1.3.6.1.4.1.45.1.3.2.5.4.1.3 | Columns3EnetAuthNodesPortIndex | read-write | mandatory | The port that the node is allowed to be heard through. If this object is 0, then the MAC address of this entry is allowed to connect to any port on the board (… |
| 1.3.6.1.4.1.45.1.3.2.5.4.1.4 | Columns3EnetAuthNodesStatus | read-write | mandatory | The status of the AuthNodes entry. The primary use of this object is for modifying the AuthNodes table. It is also returned in the enetAuthViolation trap, in w… |
| 1.3.6.1.4.1.45.1.3.2.5.5 | Scalars3EnetMaxNodesPerPort | read-write | mandatory | Maximun number of MAC address remembered by the agent on a per port basis, this number should be smaller than the maximum limit imposed by the agent. |
| 1.3.6.1.4.1.45.1.3.2.6 | Nodes3000EnetTopology | |||
| 1.3.6.1.4.1.45.1.3.2.6.1 | Nodes3000EnetNmmTopology | |||
| 1.3.6.1.4.1.45.1.3.2.6.1.1 | Tables3EnetTopNmmTable | not-accessible | mandatory | A table of the NMM's in the flat network. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1 | Rows3EnetTopNmmEntry | not-accessible | mandatory | Table that contains information about NMMs that are in the same flat network as this NMM. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.1 | Columns3EnetTopNmmSlot | read-only | mandatory | Slot that the NMM this entry is for can be found using the topology protocol. This is the slot from which a topology message was received. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.2 | Columns3EnetTopNmmPort | read-only | mandatory | Port that the NMM this entry is for can be found using the topology protocol. This is the port from which a topology message was received. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.3 | Columns3EnetTopNmmIpAddr | read-only | mandatory | IpAddress of the NMM this entry is for. This is the IP address of the NMM that sent a topology message. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.4 | Columns3EnetTopNmmMacAddr | read-only | mandatory | MAC Address of the NMM this entry is for. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.5 | Columns3EnetTopNmmChassisType | read-only | mandatory | Concentrator type of the NMM this entry is for. The enumerated values of this object are the same as defined in the common MIB for object s3ChassisType. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.6 | Columns3EnetTopNmmBkplType | read-only | mandatory | Concentrator backplane type of the NMM this entry is for. The enumerated values of this object are the same as defined in the common MIB for object s3ChassisBk… |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.7 | Columns3EnetTopNmmLocalSeg | read-only | mandatory | Does this entry NMM exist in the same segment as this (the reporting) NMM. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.8 | Columns3EnetTopNmmNumSeen | read-only | mandatory | Number of NMMs visible from the slot-port pair that this NMM is seen through. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.9 | Columns3EnetTopNmmModuleType | read-only | mandatory | The module type of the NMM that this entry is for. The values of this object are equivalent to those defined in the common MIB for object s3SlotModuleType. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.10 | Columns3EnetTopNmmNumLinks | read-only | mandatory | Number of links through which NMMs are visible on this NMM. |
| 1.3.6.1.4.1.45.1.3.2.6.1.1.1.11 | Columns3EnetTopNmmChgStatus | read-only | mandatory | If this NMM has detected any change of topology relative to itself it will set this object to change(1), otherwise noChange(2) will be returned. |
| 1.3.6.1.4.1.45.1.3.2.6.1.2 | Scalars3EnetTopNmmHelloTime | read-only | mandatory | Hello Time interval used in the topology update protocol. |
| 1.3.6.1.4.1.45.1.3.2.6.1.3 | Tables3EnetTopNmmSubsetTable | not-accessible | mandatory | Encoded octet string of the s3EnetTopNmmTable. |
| 1.3.6.1.4.1.45.1.3.2.6.1.3.1 | Rows3EnetTopNmmSubsetEntry | not-accessible | mandatory | Encoded octet string of the s3EnetTopNmmTable. Instance returned in Response PDU: On GETs: instance specified is the instance returned. On GET-NEXTs: instance … |
| 1.3.6.1.4.1.45.1.3.2.6.1.3.1.1 | Columns3EnetTopNmmSubset | read-only | mandatory | Encoded octet string. On reads it contains an integral number of s3EnetTopNmmEntry records. All entries are the same size. Values are specified in SynOptics te… |
| 1.3.6.1.4.1.45.1.3.2.6.2 | Nodes3000EnetBridTopology | |||
| 1.3.6.1.4.1.45.1.3.2.6.2.1 | Tables3EnetTopBridgeTable | not-accessible | mandatory | A table of Bridges that are in the same segment as this NMM network. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1 | Rows3EnetTopBridgeEntry | not-accessible | mandatory | Table that contains information about Bridges that are in the same segment as this NMM. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.1 | Columns3EnetTopBridgeIpAddr | read-only | mandatory | IP address of the bridge from the Hello PDU. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.2 | Columns3EnetTopBridgeNumber | read-only | mandatory | Bridge Number assigned to this bridge. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.3 | Columns3EnetTopBridgeMacAddr | read-only | mandatory | MAC Address of this bridge. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.4 | Columns3EnetTopBridgeType | read-only | mandatory | Kind of bridge this entry represents. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.5 | Columns3EnetTopBridgeStatus | read-only | mandatory | Current operational status of this bridge. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.6 | Columns3EnetTopBridgeSlotNum | read-only | mandatory | Slot on the concentrator that the Hello PDU from the bridge was received. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.7 | Columns3EnetTopBridgePortNum | read-only | mandatory | Port on concentrator that the Hello PDU from the bridge was received. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.8 | Columns3EnetTopBridgeModuleType | read-only | mandatory | Module type of the board that the Hello PDU from the Bridge was received. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.9 | Columns3EnetTopBridgeHelloPortNum | read-only | mandatory | Port Number on the Bridge from which the Hello PDU was sent. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.10 | Columns3EnetTopBridgeHelloPortType | read-only | mandatory | Type of the Port on the Bridge from which the Hello PDU was sent. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.11 | Columns3EnetTopBridgeHelloPortStatus | read-only | mandatory | Status of the Port on the Bridge from which the Hello PDU was sent. |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.12 | Columns3EnetTopBridgeCompBridgeMac1 | read-only | mandatory | Contains one of the 2 companion MAC addresses of the remote bridge. If this entry is for a local bridge or is unknown, then this object should contain the MAC … |
| 1.3.6.1.4.1.45.1.3.2.6.2.1.1.13 | Columns3EnetTopBridgeCompBridgeMac2 | read-only | mandatory | Contains one of the 2 companion MAC addresses of the remote bridge. If this entry is for a local bridge or is unknown, then this object should contain the MAC … |
| 1.3.6.1.4.1.45.1.3.2.6.2.2 | Tables3EnetTopBdgSubsetTable | not-accessible | mandatory | Encoded octet string of the s3EnetTopBridgeTable. |
| 1.3.6.1.4.1.45.1.3.2.6.2.2.1 | Rows3EnetTopBdgSubsetEntry | not-accessible | mandatory | Encoded octet string of the s3EnetTopBridgeTable. Instance returned in Response PDU: On GETs: instance specified is the instance returned. On GET-NEXTs: instan… |
| 1.3.6.1.4.1.45.1.3.2.6.2.2.1.1 | Columns3EnetTopBdgSubset | read-only | mandatory | Encoded octet string. On reads it contains an integral number of s3EnetTopBridgeEntry records. All entries are the same size. Values are specified in SynOptics… |
| 1.3.6.1.4.1.45.1.3.2.6.3 | Nodes3000EnetTopInfo | |||
| 1.3.6.1.4.1.45.1.3.2.6.3.1 | Scalars3EnetTopNmmLstChg | read-only | mandatory | The value of sysUpTime the last time an entry in the NMM topology table was added, deleted, or modified. If the NMM topology table has not changed since cold/w… |
| 1.3.6.1.4.1.45.1.3.2.6.3.2 | Scalars3EnetTopBridgeLstChg | read-only | mandatory | The value of sysUpTime the last time an entry in the bridge topology table was added, deleted, or modified. If the bridge topology table has not changed since … |
| 1.3.6.1.4.1.45.1.3.2.8 | Nodes3000EnetThreshold | |||
| 1.3.6.1.4.1.45.1.3.2.8.1 | Tables3EnetThreshTable | not-accessible | mandatory | The table of thresholds. There are three kinds of thresholds supported in the threshold table: port thresholds, slot thresholds, and concentrator thresholds. T… |
| 1.3.6.1.4.1.45.1.3.2.8.1.1 | Rows3EnetThreshEntry | not-accessible | mandatory | A row in the Ethernet Threshold Table. The following columns must be specified in a SNMP SET request to create a row in the table for each of the three kinds o… |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.1 | Columns3EnetThreshIndex | read-only | mandatory | The index into the threshold table. |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.2 | Columns3EnetThreshStatus | read-write | mandatory | The status of the threshold. The possible values for a write are: addActive(1)...If the entry does not exist, the entry is created as long as the other necessa… |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.3 | Columns3EnetThreshObject | read-write | mandatory | Specifies the part of the concentrator the threshold applies. The possible values are: other(1)..........Unknown threshold (error) concentrator(2)...The thresh… |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.4 | Columns3EnetThreshSlot | read-write | mandatory | If s3EnetThreshObject is slot(3) or port(4), then this contains a valid slot. Otherwise, the contents of this object is meaningless. |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.5 | Columns3EnetThreshPort | read-write | mandatory | If s3EnetThreshObject is port(4), then this contains a valid port. Otherwise, the contents of this object is meaningless. |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.6 | Columns3EnetThreshType | read-write | mandatory | Determines which type of threshold applies to this entry. The possible values that can be read and written are listed below. Applicable to ALL Thresholds =====… |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.7 | Columns3EnetThreshCondition | read-write | mandatory | Conditions that set off the threshold. The possible values are: other(1)........None of the following crossValue(2)...The value of s3EnetThreshActualValue cros… |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.8 | Columns3EnetThreshSetValue | read-write | mandatory | Threshold setting value. |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.9 | Columns3EnetThreshActualValue | read-only | mandatory | Current value of the threshold counter. This object is set to zero at the begining of each duration window. |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.10 | Columns3EnetThreshAction | read-write | mandatory | Determines what action is to take place if the threshold condition occurs. The possible values that can be read and written are listed below. Applicable to ALL… |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.11 | Columns3EnetThreshExceedCount | read-only | mandatory | Counter for how many times the selected threshold has reached its setting value. |
| 1.3.6.1.4.1.45.1.3.2.8.1.1.12 | Columns3EnetThreshDuration | read-write | mandatory | Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window is broken down into 5 second sa… |
| 1.3.6.1.4.1.45.1.3.2.8.2 | Scalars3EnetThreshTableSize | read-only | mandatory | The maximum number of entries in the table s3EnetThreshTable. |
| 1.3.6.1.4.1.45.1.3.2.9 | Nodes3000EnetSADATraffic | |||
| 1.3.6.1.4.1.45.1.3.2.9.1 | Tables3EnetSdTrafTable | not-accessible | deprecated | This table contains a list of entries which provide SA-DA traffic information. Specifically frame and byte counter values are provided per unique SA-DA pair. T… |
| 1.3.6.1.4.1.45.1.3.2.9.1.1 | Rows3EnetSdTrafEntry | not-accessible | deprecated | An entry in the SA-DA traffic table. |
| 1.3.6.1.4.1.45.1.3.2.9.1.1.1 | Columns3EnetSdTrafMacSA | read-only | deprecated | Source MAC address. |
| 1.3.6.1.4.1.45.1.3.2.9.1.1.2 | Columns3EnetSdTrafMacDA | read-only | deprecated | Destination MAC address. |
| 1.3.6.1.4.1.45.1.3.2.9.1.1.3 | Columns3EnetSdTrafFrames | read-only | deprecated | The number of good frames received by the concentrator for a SA-DA pair. |
| 1.3.6.1.4.1.45.1.3.2.9.1.1.4 | Columns3EnetSdTrafBytes | read-only | deprecated | The number of bytes in good frames received by the concentrator for a SA-DA pair. |
| 1.3.6.1.4.1.45.1.3.2.9.2 | Tables3EnetDsTrafTable | not-accessible | deprecated | This table contains a list of entries which provide DA-SA traffic information. Specifically frame and byte counter values are provided per unique DA-SA pair. T… |
| 1.3.6.1.4.1.45.1.3.2.9.2.1 | Rows3EnetDsTrafEntry | not-accessible | deprecated | An entry in the DA-SA table. |
| 1.3.6.1.4.1.45.1.3.2.9.2.1.1 | Columns3EnetDsTrafMacDA | read-only | deprecated | Destination MAC address. |
| 1.3.6.1.4.1.45.1.3.2.9.2.1.2 | Columns3EnetDsTrafMacSA | read-only | deprecated | Source MAC address. |
| 1.3.6.1.4.1.45.1.3.2.9.2.1.3 | Columns3EnetDsTrafFrames | read-only | deprecated | The number of good frames received by the concentrator for a DA-SA pair. |
| 1.3.6.1.4.1.45.1.3.2.9.2.1.4 | Columns3EnetDsTrafBytes | read-only | deprecated | The number of bytes in good frames received by the concentrator for a DA-SA pair. |
| 1.3.6.1.4.1.45.1.3.2.9.3 | Tables3EnetPagedTrafTable | not-accessible | deprecated | This table contains a list of entries for the 'paged' Traffic Matrix table. |
| 1.3.6.1.4.1.45.1.3.2.9.3.1 | Rows3EnetPagedTrafEntry | not-accessible | deprecated | A 'paged' entry in the Traffic Matrix table. |
| 1.3.6.1.4.1.45.1.3.2.9.3.1.1 | Columns3EnetTrafPageNo | read-only | deprecated | A specific page in the Traffic Matrix table. |
| 1.3.6.1.4.1.45.1.3.2.9.3.1.2 | Columns3EnetTrafPageEntries | read-only | deprecated | This OCTET STRING contains up to 20 valid Traffic Matrix table entries. The entries will not be in any logical order. Each entry consists of a 20-byte octet st… |
| 1.3.6.1.4.1.45.1.3.2.9.4 | Scalars3EnetTrafAgeInterval | read-write | deprecated | The time used for aging of the nodes in tables s3EnetSdTrafTable and s3EnetDsTrafTable. Once a node has completely aged it will be removed from these tables. N… |
| 1.3.6.1.4.1.45.1.3.2.10 | Nodes3000EnetPlusStatistics | |||
| 1.3.6.1.4.1.45.1.3.2.10.1 | Tables3EnetPlusPortTable | not-accessible | mandatory | This table provides a list of entries, each entry providing information related to frame MAC level error conditions per port. This table is conceptually an ext… |
| 1.3.6.1.4.1.45.1.3.2.10.1.1 | Rows3EnetPlusPortEntry | not-accessible | mandatory | An entry in the Plus Port table. |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.1 | Columns3EnetPlusPortBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. (This is the slot number.) |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.2 | Columns3EnetPlusPortIndex | read-only | mandatory | A unique value for each port. Its value typically ranges between 1 and 12. |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.3 | Columns3EnetPortFragments | read-only | mandatory | This contains a count of fragments received by the board between 80-512 bits (64 bytes), inclusively, with invalid FCS or alignment errors. (These commonly rep… |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.4 | Columns3EnetPortShortEvents | read-only | mandatory | This contains a count of fragments received by the port shorter than 80 bits. |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.5 | Columns3EnetPortAutoPartitions | read-only | mandatory | This contains a count of times the ports on the board have autopartitioned due to excessive collisions (more than 32 consecutive collisions). This count is an … |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.6 | Columns3EnetPortRateMismatches | read-only | mandatory | This contains a count of the occurrences of out of spec bit rates. This indicates the number of times FIFO buffer over-runs or underruns due to transmission ra… |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.7 | Columns3EnetPortJabbers | read-only | mandatory | This contains a count of the times that MAU jabber lockup protection (MJLP) was invoked because transmission of data from this port exceeded 5 msec in duration… |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.8 | Columns3EnetPortLastSrcAddr | read-only | mandatory | This is the source address of the last packet received through this port. |
| 1.3.6.1.4.1.45.1.3.2.10.1.1.9 | Columns3EnetPortSrcAddrChanges | read-only | mandatory | This is the number of times that the s3EnetPortLastSrcAddr object for this has changed. |
| 1.3.6.1.4.1.45.1.3.2.10.2 | Tables3EnetPlusBoardTable | not-accessible | mandatory | This table provides a list of entries, each entry providing information related to frame MAC level error conditions per board. This table is conceptually an ex… |
| 1.3.6.1.4.1.45.1.3.2.10.2.1 | Rows3EnetPlusBoardEntry | not-accessible | mandatory | An entry in the Plus Board table. |
| 1.3.6.1.4.1.45.1.3.2.10.2.1.1 | Columns3EnetPlusBoardIndex | read-only | mandatory | The board number part of an index. |
| 1.3.6.1.4.1.45.1.3.2.10.2.1.2 | Columns3EnetBoardFragments | read-only | mandatory | This contains a count of fragments received by the board between 80-512 bits (64 bytes), inclusively, with invalid FCS or alignment errors. (These commonly rep… |
| 1.3.6.1.4.1.45.1.3.2.10.2.1.3 | Columns3EnetBoardShortEvents | read-only | mandatory | This contains a count of fragments received by the board shorter than 80 bits. |
| 1.3.6.1.4.1.45.1.3.2.10.2.1.4 | Columns3EnetBoardAutoPartitions | read-only | mandatory | This contains a count of times the ports on this board have been autopartitioned due to excessive collisions (more than 32 consecutive collisions). This count … |
| 1.3.6.1.4.1.45.1.3.2.10.2.1.5 | Columns3EnetBoardRateMismatches | read-only | mandatory | This contains a count of the occurrences of out of spec bit rates. This indicates the number of times FIFO buffer over-runs or underruns due to transmission ra… |
| 1.3.6.1.4.1.45.1.3.2.10.2.1.6 | Columns3EnetBoardJabbers | read-only | mandatory | This contains a count of the times that MAU jabber lockup protection (MJLP) was invoked because transmission of data from a port on this board exceeded 5 msec … |
| 1.3.6.1.4.1.45.1.3.2.10.3 | Nodes3000EnetPlusConc | |||
| 1.3.6.1.4.1.45.1.3.2.10.3.1 | Scalars3EnetConcShortEvents | read-only | mandatory | This contains a count of fragments received by the concentrator shorter than 80 bits. |
| 1.3.6.1.4.1.45.1.3.2.10.3.2 | Scalars3EnetConcAutoPartitions | read-only | mandatory | This contains a count of times the ports on this concentrator have been autopartitioned due to excessive collisions (more than 32 consecutive collisions). This… |
| 1.3.6.1.4.1.45.1.3.2.10.3.3 | Scalars3EnetConcRateMismatches | read-only | mandatory | This contains a count of the occurrences of out of spec bit rates. This indicates the number of times FIFO buffer over-runs or underruns due to transmission ra… |
| 1.3.6.1.4.1.45.1.3.2.10.3.4 | Scalars3EnetConcJabbers | read-only | mandatory | This contains a count of the times that MAU jabber lockup protection (MJLP) was invoked because transmission of data from a port on this concentrator exceeded … |
| 1.3.6.1.4.1.45.1.3.2.10.3.5 | Scalars3EnetConcCollBackoffErrors | read-only | mandatory | This contains a total concentrator count of the collision events that occur during the normal collision window (i.e., the collisions is not a late collision) a… |
| 1.3.6.1.4.1.45.1.3.2.11 | Nodes3000EnetFrameSizeDist | |||
| 1.3.6.1.4.1.45.1.3.2.11.1 | Tables3EnetFrSizePortTable | not-accessible | mandatory | This table provides a list of entries, each entry providing information related to frame sizes of packets received on a port. The variables defined for the ent… |
| 1.3.6.1.4.1.45.1.3.2.11.1.1 | Rows3EnetFrSizePortEntry | not-accessible | mandatory | An entry in the FrSize Port table. |
| 1.3.6.1.4.1.45.1.3.2.11.1.1.1 | Columns3EnetFrSizePortBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. (This is the slot number.) |
| 1.3.6.1.4.1.45.1.3.2.11.1.1.2 | Columns3EnetFrSizePortIndex | read-only | mandatory | A unique value for each port. Its value typically ranges between 1 and 12. |
| 1.3.6.1.4.1.45.1.3.2.11.1.1.3 | Columns3EnetFrSizePort64to127 | read-only | mandatory | This contains a count of frames received by the port that are in the range of 64 octets to 127 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.1.1.4 | Columns3EnetFrSizePort128to255 | read-only | mandatory | This contains a count of frames received by the port that are in the range of 128 octets to 255 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.1.1.5 | Columns3EnetFrSizePort256to511 | read-only | mandatory | This contains a count of frames received by the port that are in the range of 256 octets to 511 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.1.1.6 | Columns3EnetFrSizePort512to1023 | read-only | mandatory | This contains a count of frames received by the port that are in the range of 512 octets to 1023 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.1.1.7 | Columns3EnetFrSizePort1024to1518 | read-only | mandatory | This contains a count of frames received by the port that are in the range of 1024 octets to 1518 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.2 | Tables3EnetFrSizeBoardTable | not-accessible | mandatory | This table provides a list of entries, each entry providing information related to frame MAC level error conditions per board. The variables defined for the en… |
| 1.3.6.1.4.1.45.1.3.2.11.2.1 | Rows3EnetFrSizeBoardEntry | not-accessible | mandatory | An entry in the FrSize Board table. |
| 1.3.6.1.4.1.45.1.3.2.11.2.1.1 | Columns3EnetFrSizeBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. (This is the slot number.) |
| 1.3.6.1.4.1.45.1.3.2.11.2.1.2 | Columns3EnetFrSizeBoard64to127 | read-only | mandatory | This contains a count of frames received by the board that are in the range of 64 octets to 127 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.2.1.3 | Columns3EnetFrSizeBoard128to255 | read-only | mandatory | This contains a count of frames received by the board that are in the range of 128 octets to 255 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.2.1.4 | Columns3EnetFrSizeBoard256to511 | read-only | mandatory | This contains a count of frames received by the board that are in the range of 256 octets to 511 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.2.1.5 | Columns3EnetFrSizeBoard512to1023 | read-only | mandatory | This contains a count of frames received by the board that are in the range of 512 octets to 1023 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.2.1.6 | Columns3EnetFrSizeBoard1024to1518 | read-only | mandatory | This contains a count of frames received by the board that are in the range of 1024 octets to 1518 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.3 | Nodes3000EnetFrameConc | |||
| 1.3.6.1.4.1.45.1.3.2.11.3.1 | Scalars3EnetFrSizeConc64to127 | read-only | mandatory | This contains a count of frames received by the concentrator that are in the range of 64 octets to 127 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.3.2 | Scalars3EnetFrSizeConc128to255 | read-only | mandatory | This contains a count of frames received by the concentrator that are in the range of 128 octets to 255 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.3.3 | Scalars3EnetFrSizeConc256to511 | read-only | mandatory | This contains a count of frames received by the concentrator that are in the range of 256 octets to 511 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.3.4 | Scalars3EnetFrSizeConc512to1023 | read-only | mandatory | This contains a count of frames received by the concentrator that are in the range of 512 octets to 1023 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.11.3.5 | Scalars3EnetFrSizeConc1024to1518 | read-only | mandatory | This contains a count of frames received by the concentrator that are in the range of 1024 octets to 1518 octets, inclusive. |
| 1.3.6.1.4.1.45.1.3.2.12 | Nodes3000EnetProtoTypeDist | |||
| 1.3.6.1.4.1.45.1.3.2.12.1 | Tables3EnetProtoPortTable | not-accessible | mandatory | This table provides a list of entries, each entry providing information related to packet protocol type distributions per port. The variables defined for the e… |
| 1.3.6.1.4.1.45.1.3.2.12.1.1 | Rows3EnetProtoPortEntry | not-accessible | mandatory | An entry in the Proto Port table. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.1 | Columns3EnetProtoPortBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. (This is the slot number.) |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.2 | Columns3EnetProtoPortIndex | read-only | mandatory | A unique value for each port. Its value typically ranges between 1 and 12. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.3 | Columns3EnetProtoPort8023Frames | read-only | mandatory | This contains a count of frames received by the port that are of 802.3 type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.4 | Columns3EnetProtoPortEthernetFrames | read-only | mandatory | This contains a count of frames received by the port that are of Ethernet type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.5 | Columns3EnetProtoPortOtherFrames | read-only | mandatory | This contains a count of frames received by the port that are of types not counted by individual counters below. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.6 | Columns3EnetProtoPortSnaFrames | read-only | mandatory | This contains a count of frames received by the port that are of SNA type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.7 | Columns3EnetProtoPortIpFrames | read-only | mandatory | This contains a count of frames received by the port that are of IP type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.8 | Columns3EnetProtoPortIsoFrames | read-only | mandatory | This contains a count of frames received by the port that are of ISO type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.9 | Columns3EnetProtoPortArpFrames | read-only | mandatory | This contains a count of frames received by the port that are of ARP type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.10 | Columns3EnetProtoPortDecIVFrames | read-only | mandatory | This contains a count of frames received by the port that are of DECIV type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.11 | Columns3EnetProtoPortDecLatFrames | read-only | mandatory | This contains a count of frames received by the port that are of DECLAT type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.12 | Columns3EnetProtoPortEthTalkFrames | read-only | mandatory | This contains a count of frames received by the port that are of EtherTalk type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.13 | Columns3EnetProtoPortXnsFrames | read-only | mandatory | This contains a count of frames received by the port that are of XNS type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.14 | Columns3EnetProtoPortIpxFrames | read-only | mandatory | This contains a count of frames received by the port that are of IPX type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.15 | Columns3EnetProtoPortDecLavcFrames | read-only | mandatory | This contains a count of frames received by the port that are of DEC LAVC type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.16 | Columns3EnetProtoPortNetBiosFrames | read-only | mandatory | This contains a count of frames received by the port that are of NETBIOS type. |
| 1.3.6.1.4.1.45.1.3.2.12.1.1.17 | Columns3EnetProtoPortBrdgSpanTreeFrames | read-only | mandatory | This contains a count of frames received by the port that are of Bridge Spanning Tree type. |
| 1.3.6.1.4.1.45.1.3.2.12.2 | Tables3EnetProtoBoardTable | not-accessible | mandatory | This table provides a list of entries, each entry providing information related to packet protocol type distribution per board. The variables defined for the e… |
| 1.3.6.1.4.1.45.1.3.2.12.2.1 | Rows3EnetProtoBoardEntry | not-accessible | mandatory | An entry in the Proto Board table. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.1 | Columns3EnetProtoBoardIndex | read-only | mandatory | A unique value for each board. Its value ranges between 1 and 12. (This is the slot number.) |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.2 | Columns3EnetProtoBoard8023Frames | read-only | mandatory | This contains a count of frames received by the board that are of 802.3 type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.3 | Columns3EnetProtoBoardEthernetFrames | read-only | mandatory | This contains a count of frames received by the board that are of Ethernet type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.4 | Columns3EnetProtoBoardOtherFrames | read-only | mandatory | This contains a count of frames received by the board that are of types not specified below. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.5 | Columns3EnetProtoBoardSnaFrames | read-only | mandatory | This contains a count of frames received by the board that are of SNA type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.6 | Columns3EnetProtoBoardIpFrames | read-only | mandatory | This contains a count of frames received by the board that are of IP type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.7 | Columns3EnetProtoBoardIsoFrames | read-only | mandatory | This contains a count of frames received by the board that are of ISO type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.8 | Columns3EnetProtoBoardArpFrames | read-only | mandatory | This contains a count of frames received by the board that are of ARP type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.9 | Columns3EnetProtoBoardDecIVFrames | read-only | mandatory | This contains a count of frames received by the board that are of DECIV type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.10 | Columns3EnetProtoBoardDecLatFrames | read-only | mandatory | This contains a count of frames received by the board that are of DECLAT type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.11 | Columns3EnetProtoBoardEthTalkFrames | read-only | mandatory | This contains a count of frames received by the board that are of EtherTalk type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.12 | Columns3EnetProtoBoardXnsFrames | read-only | mandatory | This contains a count of frames received by the board that are of XNS type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.13 | Columns3EnetProtoBoardIpxFrames | read-only | mandatory | This contains a count of frames received by the board that are of IPX type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.14 | Columns3EnetProtoBoardDecLavcFrames | read-only | mandatory | This contains a count of frames received by the board that are of DEC LAVC type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.15 | Columns3EnetProtoBoardNetBiosFrames | read-only | mandatory | This contains a count of frames received by the board that are of NETBIOS type. |
| 1.3.6.1.4.1.45.1.3.2.12.2.1.16 | Columns3EnetProtoBoardBrdgSpanTreeFrames | read-only | mandatory | This contains a count of frames received by the board that are of Bridge Spanning Tree type. |
| 1.3.6.1.4.1.45.1.3.2.12.3 | Nodes3000EnetProtoConc | |||
| 1.3.6.1.4.1.45.1.3.2.12.3.1 | Scalars3EnetProtoConc8023Frames | read-only | mandatory | This contains a count of frames received by the concentrator that are of 802.3 type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.2 | Scalars3EnetProtoConcEthernetFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of Ethernet type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.3 | Scalars3EnetProtoConcOtherFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of types not specified below. |
| 1.3.6.1.4.1.45.1.3.2.12.3.4 | Scalars3EnetProtoConcSnaFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of SNA type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.5 | Scalars3EnetProtoConcIpFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of IP type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.6 | Scalars3EnetProtoConcIsoFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of ISO type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.7 | Scalars3EnetProtoConcArpFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of ARP type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.8 | Scalars3EnetProtoConcDecIVFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of DECIV type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.9 | Scalars3EnetProtoConcDecLatFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of DECLAT type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.10 | Scalars3EnetProtoConcEthTalkFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of EtherTalk type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.11 | Scalars3EnetProtoConcXnsFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of XNS type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.12 | Scalars3EnetProtoConcIpxFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of IPX type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.13 | Scalars3EnetProtoConcDecLavcFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of DEC LAVC type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.14 | Scalars3EnetProtoConcNetBiosFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of NETBIOS type. |
| 1.3.6.1.4.1.45.1.3.2.12.3.15 | Scalars3EnetProtoConcBrdgSpanTreeFrames | read-only | mandatory | This contains a count of frames received by the concentrator that are of Bridge Spanning Tree type. |
| 1.3.6.1.4.1.45.1.3.2.13 | Nodes3000EnetHosts | |||
| 1.3.6.1.4.1.45.1.3.2.13.1 | Scalars3EnetHostTableSize | read-only | mandatory | The current number of entries in table s3EnetHostTable. |
| 1.3.6.1.4.1.45.1.3.2.13.2 | Scalars3EnetHostLastDeleteTime | read-only | mandatory | The value of sysUpTime when the last entry was deleted from table s3EnetHostTable due to a shortage of resources. If no deletions have occurred, then the value… |
| 1.3.6.1.4.1.45.1.3.2.13.3 | Tables3EnetHostTable | not-accessible | mandatory | A Table containing MAC/Network address pairs that have been detected on the segment. |
| 1.3.6.1.4.1.45.1.3.2.13.3.1 | Rows3EnetHostEntry | not-accessible | mandatory | A row in the table of MAC/Network address pairs. Entries can not be created or deleted via SNMP operations. New entries are added when a new MAC/Network addres… |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.1 | Columns3EnetHostIndex | read-only | mandatory | The index of the MAC/Network address pair. The value is between 1 and N, where N is the value of s3EnetHostTableSize. The association of this index to a pair m… |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.2 | Columns3EnetHostObserveOrder | read-only | mandatory | The relative ordering of the MAC/Network adddress pair. There is a global value that starts at 1 and increases by one for each observation of an address pair. … |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.3 | Columns3EnetHostNetAddr | read-only | mandatory | The network address (in network order) of the MAC/Network address pair. |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.4 | Columns3EnetHostAddrType | read-only | mandatory | The type of address that is stored in the object s3EnetHostNetAddr for this entry. The values are: other(1)...Unknown type ip(2)......IP address ipx(3).....IPX… |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.5 | Columns3EnetHostMacAddress | read-only | mandatory | The MAC address (in canonical order) of the MAC/Network address pair. |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.6 | Columns3EnetHostSlotIndex | read-only | mandatory | The board index that the host is connected through. |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.7 | Columns3EnetHostPortIndex | read-only | mandatory | The port index that the host is connected through. |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.8 | Columns3EnetHostLearnMethod | read-only | mandatory | Indicates the method that was used to discover the MAC/Network address pair. The methods that can be used for discovery are shown below. other(1).........Indic… |
| 1.3.6.1.4.1.45.1.3.2.13.3.1.9 | Columns3EnetHostTimeStamp | read-only | mandatory | The value of sysUpTime when the MAC/Network address pair was last observed on the segment. |