TN-ELPS-MIB
49 objects
No module-level DESCRIPTION found.
Imported Objects
| IEEE8021-CFM-MIB | Dot1agCfmMepId |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| TN-PROTECTION-MIB | tnProtectionMIB |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.109.2 | NodetnElpsMib | |||
| 1.3.6.1.4.1.868.2.5.109.2.0 | NodetnElpsMibNotifications | |||
| 1.3.6.1.4.1.868.2.5.109.2.0.1 | NotificationtnElpsAlarmUp | current | A Elps has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the Elps that has detected the fault. T… | |
| 1.3.6.1.4.1.868.2.5.109.2.0.2 | NotificationtnElpsAlarmDown | current | A Elps has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the Elps that has detected the fault. T… | |
| 1.3.6.1.4.1.868.2.5.109.2.1 | NodetnElpsMibObjects | |||
| 1.3.6.1.4.1.868.2.5.109.2.1.1 | NodetnElpsCfgMgmt | |||
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1 | TabletnElpsCfgTable | not-accessible | current | This table provides configuration of ELPS. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1 | RowtnElpsCfgEntry | not-accessible | current | A entry in the table represents a configuration for ELPS. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.1 | ColumntnElpsInstance | not-accessible | current | The ID of the ELPS. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.2 | ColumntnElpsDomain | read-create | current | Port: This will create a ELPS in the Port Domain. 'W/P Flow' is a Port. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.3 | ColumntnElpsArchitecture | read-create | current | Port: This will create a 1+1 ELPS. Port: This will create a 1:1 ELPS. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.4 | ColumntnElpsWFlowPortId | read-create | current | The working flow for the ELPS - See 'Domain' above. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.5 | ColumntnElpsPFlowPortId | read-create | current | The protecting flow for the ELPS - See 'Domain' above. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.6 | ColumntnElpsWSfMepId | read-create | current | The working Signal Fail reporting MEP. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.7 | ColumntnElpsPSfMepId | read-create | current | The protecting Signal Fail reporting MEP. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.8 | ColumntnElpsApsMepId | read-create | current | The APS PDU handling MEP. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.9 | ColumntnElpsConfigured | read-only | current | False: This ELPS is only created and has not yet been configured - is not active. True: This ELPS is configured - is active. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.10 | ColumntnElpsDirection | read-create | current | Unidirectional: ELPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1. Bidirectional: ELPS in th… |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.11 | ColumntnElpsApsEnable | read-create | current | The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.12 | ColumntnElpsRevertiveEnable | read-create | current | The revertive switching to working flow can be enabled/disabled. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.13 | ColumntnElpsWTRTime | read-create | current | The Wait To Restore timing value to be used in revertive switching. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.14 | ColumntnElpsHoldOffTime | read-create | current | The timing value to be used to make persistent check on Signal Fail before switching. |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.15 | ColumntnElpsCmd | read-create | current | None: There is no active local command on this instance. Clear: The active local command will be cleared. Lock Out: This ELPS is locked to working (not active)… |
| 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.16 | ColumntnElpsStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2 | NodetnElpsStateMgmt | |||
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1 | TabletnElpsStateTable | not-accessible | current | This table provides configuration about ELPS state |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1 | RowtnElpsStateEntry | not-accessible | current | This entry represents configuration about ELPS state |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.1 | ColumntnElpsProtectionState | read-only | current | ELPS Protection state |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.2 | ColumntnElpsWFlowState | read-only | current | signalOk: State of working flow is ok signalFail: State of working flow is Signal Fail signalDegrade: State of working flow is Signal Degrade (for future use) |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.3 | ColumntnElpsPFlowState | read-only | current | signalOk: State of protecting flow is ok signalFail: State of protecting flow is Signal Fail signalDegrade: State of protecting flow is Signal Degrade (for fut… |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.4 | ColumntnElpsTransmitRequestType | read-only | current | The transmitted request type. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.5 | ColumntnElpsTransmitRequestedSignal | read-only | current | The transmitted request signal. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.6 | ColumntnElpsTransmitBridgedSignal | read-only | current | The transmitted bridged signal. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.7 | ColumntnElpsReceiveRequestType | read-only | current | The requested type that is received from APS. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.8 | ColumntnElpsReceiveRequestedSignal | read-only | current | The requested signal received from APS. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.9 | ColumntnElpsReceiveBridgedSignal | read-only | current | The bridged signal received from APS . |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.10 | ColumntnElpsArchitectureMismatch | read-only | current | The architecture indicated in the received APS does not match the locally configured. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.11 | ColumntnElpsAPSOnWorking | read-only | current | APS is received on the working flow. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.12 | ColumntnElpsSwitchingIncomplete | read-only | current | Traffic is not selected from the same flow instance in the two ends. |
| 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.13 | ColumntnElpsNoApsReceived | read-only | current | APS PDU is not received from the other end. |
| 1.3.6.1.4.1.868.2.5.109.2.1.3 | NodetnElpsLinkOverMgmt | |||
| 1.3.6.1.4.1.868.2.5.109.2.1.3.1 | TabletnElpsLinkOverTable | not-accessible | current | This table provides configuration about ELPS Link Over based on the SOAM DM |
| 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1 | RowtnElpsLinkOverEntry | not-accessible | current | This entry represents configuration about ELPS Link Over |
| 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.1 | ColumntnElpsLinkOverEnabled | read-write | current | The feature about the DM LinkOver can be enabled and disabeld. False: This feature is disabled. True: This ELPS is enabled. |
| 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.2 | ColumntnElpsLinkOverDeltaValue | read-write | current | The Delta value is ranged from 6 to 120. If the value that is on one link subtract the other one is larger than the delta value, the data flow will be swithed … |
| 1.3.6.1.4.1.868.2.5.109.2.2 | NodetnElpsMibConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TnElpsDefectState | INTEGER { signalOk (1), signalFail (2), signalDegrade (3) } | current | Indicates ELPS working/protecting state. |
| TnElpsProtSwitchState | INTEGER { disabled (1), noRequestW (2), noRequestP (3), lockout (4), forcedSwitch (5), signalFailW (6), signalFailP (7), manualSwitchW (8), manualSwitchP (9), waitToRestore (10), exerciseW (11), exerciseP (12), reverseRequestW (13), reverseRequestP (14), doNotRevert (15) } | current | Indicates ELPS protection switch state. |
| TnElpsRequestType | INTEGER { noRequest (1), doNotRevert (2), reverseRequest (3), exercise (4), wait2Restore (5), manualSwitch (6), signalDegrade (7), signalFailForWorking (8), forcedWwitch (9), signalFailForProtection (10), lockoutOfProtection (11) } | current | Indicates ELPS received/transmitted APS request type. |