TN-RMD-IF-MIB
120 objects
Interface MIB for Remote Managed Devices (RMDs).
Imported Objects
| IEEE8021-CFM-MIB | VlanIdOrNone |
| IF-MIB | IANAifType InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| TN-RMD-SYSTEM-MIB | tnRmdSystemId |
| TROPIC-GLOBAL-REG | tnRmdMIBModules tnRmdObjs |
| TROPIC-SYSTEM-MIB | tnSysSwitchId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7483.5.1.4.3 | IdentitytnRmdIfMibModule | Interface MIB for Remote Managed Devices (RMDs). | ||
| 1.3.6.1.4.1.7483.6.4.1.3 | NodetnRmdIfObjects | |||
| 1.3.6.1.4.1.7483.6.4.1.3.1 | ScalartnRmdIfAttributeTotal | read-only | current | . |
| 1.3.6.1.4.1.7483.6.4.1.3.2 | TabletnRmdSystemInterfacesTable | not-accessible | current | A table containing the common settings for all interfaces of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.2.1 | RowtnRmdSystemInterfacesEntry | not-accessible | current | A list of objects containing the common settings for all interfaces of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.2.1.1 | ColumntnRmdSystemInterfacesFrameForwardingMode | read-write | current | The frame forwarding mode on all interfaces of the RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.3 | TabletnRmdSystemLoopbackTable | not-accessible | current | A table containing the default loopback modes of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.3.1 | RowtnRmdSystemLoopbackEntry | not-accessible | current | A list of objects containing the default loopback mode of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.3.1.1 | ColumntnRmdSystemDefaultLoopbackMode | read-write | current | The default loopback mode of the RMD. This mode applies in case no loopback mode can be provisioned at the level where the loopback is provisioned. |
| 1.3.6.1.4.1.7483.6.4.1.3.4 | TabletnRmdIfTable | not-accessible | current | A table containing the parameters of the interfaces of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1 | RowtnRmdIfEntry | not-accessible | current | A list of objects containing the parameters of an interface of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1.1 | ColumntnRmdIfIndex | not-accessible | current | Unique number identifying the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1.2 | ColumntnRmdIfType | read-only | current | The type of the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1.3 | ColumntnRmdIfMacAddress | read-only | current | The MAC address of the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1.4 | ColumntnRmdIfTraffic | read-write | current | Indicates whether traffic is enabled for the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1.5 | ColumntnRmdIfLinkPassThrough | read-write | current | Indicates whether Link Pass-Through is enabled, i.e. whether the other interface of the Two-Port MAC Relay relays defects to this interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1.6 | ColumntnRmdIfLinkPassThroughStatus | read-only | current | Indicates the Link Pass-Through status of the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.4.1.7 | ColumntnRmdIfOperationalState | read-only | current | Indicates the operational state of the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.5 | TabletnRmdIfMauTable | not-accessible | current | A table containing the parameters of the MAUs of all interfaces of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1 | RowtnRmdIfMauEntry | not-accessible | current | A list of objects containing the parameters of a MAU of an interface of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.1 | ColumntnRmdIfMauIndex | not-accessible | current | Unique number identifying the MAU within the scope of the containing interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.2 | ColumntnRmdIfMauAutoNegotiation | read-write | current | Indicates whether auto-negotiation is enabled for the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.3 | ColumntnRmdIfMauAutoNegotiationStatus | read-only | current | The auto-negotiation status of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.4 | ColumntnRmdIfMauAutoNegotiationFallback | read-write | current | Indicates whether auto-negotiation fallback is enabled for the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.5 | ColumntnRmdIfMauProvisionedSpeed | read-write | current | The provisioned speed of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.6 | ColumntnRmdIfMauProvisionedDuplexMode | read-write | current | The provisioned duplex mode of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.7 | ColumntnRmdIfMauProvisionedPauseMode | read-write | current | The provisioned pause mode of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.8 | ColumntnRmdIfMauProvisionedMasterSlaveRole | read-write | current | The provisioned master-slave role of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.9 | ColumntnRmdIfMauActualSpeed | read-only | current | The actual speed of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.10 | ColumntnRmdIfMauActualDuplexMode | read-only | current | The actual duplex mode of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.11 | ColumntnRmdIfMauActualPauseMode | read-only | current | The actual pause mode of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.12 | ColumntnRmdIfMauActualMasterSlaveRole | read-only | current | The actual master-slave role of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.5.1.13 | ColumntnRmdIfMauMdixMode | read-only | current | The MDI/MDIX mode of the MAU. |
| 1.3.6.1.4.1.7483.6.4.1.3.6 | TabletnRmdIfMsaTable | not-accessible | current | A table containing the MSA inventory of all MAUs of all interfaces of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1 | RowtnRmdIfMsaEntry | not-accessible | current | A list of objects containing the MSA inventory of a MAU of an interface of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.1 | ColumntnRmdIfMsaModuleVendorSerNo | read-only | current | Module vendor serial number. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.2 | ColumntnRmdIfMsaModuleVendor | read-only | current | Module vendor. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.3 | ColumntnRmdIfMsaWavelength | read-only | current | XFP/SFP wavelength. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.4 | ColumntnRmdIfMsaModuleType | read-only | current | Module type. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.5 | ColumntnRmdIfMsaCLEI | read-only | current | CLEI. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.6 | ColumntnRmdIfMsaUnitPartNum | read-only | current | Unit part number. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.7 | ColumntnRmdIfMsaSWPartNum | read-only | current | Software part number. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.8 | ColumntnRmdIfMsaFactoryID | read-only | current | Factory ID. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.9 | ColumntnRmdIfMsaDate | read-only | current | Date. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.10 | ColumntnRmdIfMsaExtraData | read-only | current | Extra data. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.11 | ColumntnRmdIfMsaMaximumCaseTemperature | read-only | current | Maximum case temperature. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.12 | ColumntnRmdIfMsaInterchangeabilityMarking | read-only | current | Interchangeability marking. |
| 1.3.6.1.4.1.7483.6.4.1.3.6.1.13 | ColumntnRmdIfMsaAcronymCode | read-only | current | Acronym code. |
| 1.3.6.1.4.1.7483.6.4.1.3.7 | TabletnRmdIfDdmTable | not-accessible | current | A table containing the Digital Diagnostic Monitoring (DDM) parameters of all MAUs of all interfaces of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1 | RowtnRmdIfDdmEntry | not-accessible | current | A list of objects containing the DDM parameters of a MAU of an interface of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.1 | ColumntnRmdIfDdmTemperature | read-only | current | The value of tnRmdIfDdmTemperature indicates the current temperature of the interface in degrees Celsius. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.2 | ColumntnRmdIfDdmTempLowWarning | read-only | current | The value of tnRmdIfDdmTempLowWarning indicates the temperature of the interface in degrees Celsius that triggers a low-warning. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.3 | ColumntnRmdIfDdmTempLowAlarm | read-only | current | The value of tnRmdIfDdmTempLowAlarm indicates the temperature of the interface in degrees Celsius that triggers a low-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.4 | ColumntnRmdIfDdmTempHiWarning | read-only | current | The value of tnRmdIfDdmTempHiWarning indicates the temperature of the interface in degrees Celsius that triggers a hi-warning. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.5 | ColumntnRmdIfDdmTempHiAlarm | read-only | current | The value of tnRmdIfDdmTempHiAlarm indicates the temperature of the interface in degrees Celsius that triggers a hi-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.6 | ColumntnRmdIfDdmSupplyVoltage | read-only | current | The value of tnRmdIfDdmSupplyVoltage indicates the current supply voltage of the interface in micro-Volts (uV). |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.7 | ColumntnRmdIfDdmSupplyVoltageLowWarning | read-only | current | The value of tnRmdIfDdmSupplyVoltageLowWarning indicates the supply voltage of the interface in micro-Volts (uV) that triggers a low-warning. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.8 | ColumntnRmdIfDdmSupplyVoltageLowAlarm | read-only | current | The value of tnRmdIfDdmSupplyVoltageLowAlarm indicates the supply voltage of the interface in micro-Volts (uV) that triggers a low-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.9 | ColumntnRmdIfDdmSupplyVoltageHiWarning | read-only | current | The value of tnRmdIfDdmSupplyVoltageHiWarning indicates the supply voltage of the interface in micro-Volts (uV) that triggers a hi-warning. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.10 | ColumntnRmdIfDdmSupplyVoltageHiAlarm | read-only | current | The value of tnRmdIfDdmSupplyVoltageHiAlarm indicates the supply voltage of the interface in micro-Volts (uV) that triggers a hi-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.11 | ColumntnRmdIfDdmTxBiasCurrent | read-only | current | The value of tnRmdIfDdmTxBiasCurrent indicates the current Transmit Bias Current of the interface in micro-Amperes (uA). |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.12 | ColumntnRmdIfDdmTxBiasCurrentLowWarning | read-only | current | The value of tnRmdIfDdmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the interface in micro-Amperes (uA) that triggers a low-warning. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.13 | ColumntnRmdIfDdmTxBiasCurrentLowAlarm | read-only | current | The value of tnRmdIfDdmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the interface in micro-Amperes (uA) that triggers a low-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.14 | ColumntnRmdIfDdmTxBiasCurrentHiWarning | read-only | current | The value of tnRmdIfDdmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the interface in micro-Amperes (uA) that triggers a hi-warning. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.15 | ColumntnRmdIfDdmTxBiasCurrentHiAlarm | read-only | current | The value of tnRmdIfDdmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the interface in micro-Amperes (uA) that triggers a hi-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.16 | ColumntnRmdIfDdmTxOutputPower | read-only | current | The value of tnRmdIfDdmTxOutputPower indicates the current Output Power of the interface in one tenths of a micro-Watt (uW). For example: Using the SNMP value … |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.17 | ColumntnRmdIfDdmTxOutputPowerLowWarning | read-only | current | The value of tnRmdIfDdmTxOutputPowerLowWarning indicates the Output Power of the interface in one tenths of a micro-Watt (uW) that triggers a low-warning. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.18 | ColumntnRmdIfDdmTxOutputPowerLowAlarm | read-only | current | The value of tnRmdIfDdmTxOutputPowerLowAlarm indicates the Output Power of the interface in one tenths of a micro-Watt (uW) that triggers a low-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.19 | ColumntnRmdIfDdmTxOutputPowerHiWarning | read-only | current | The value of tnRmdIfDdmTxOutputPowerHiWarning indicates the Output Power of the interface in one tenths of a micro-Watt (uW) that triggers a hi-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.20 | ColumntnRmdIfDdmTxOutputPowerHiAlarm | read-only | current | The value of tnRmdIfDdmTxOutputPowerHiAlarm indicates the Output Power of the interface in one tenths of a micro-Watt (uW) that triggers a hi-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.21 | ColumntnRmdIfDdmRxOpticalPower | read-only | current | The value of tnRmdIfDdmRxOpticalPower indicates the current Received Optical Power of the interface in one tenths of a micro-Watt (uW). For example: Using the … |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.22 | ColumntnRmdIfDdmRxOpticalPowerLowWarning | read-only | current | The value of tnRmdIfDdmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in one tenths of a micro-Watt (uW) that triggers a low-warn… |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.23 | ColumntnRmdIfDdmRxOpticalPowerLowAlarm | read-only | current | The value of tnRmdIfDdmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in one tenths of a micro-Watt (uW) that triggers a low-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.24 | ColumntnRmdIfDdmRxOpticalPowerHiWarning | read-only | current | The value of tnRmdIfDdmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in one tenths of a micro-Watt (uW) that triggers a hi-warnin… |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.25 | ColumntnRmdIfDdmRxOpticalPowerHiAlarm | read-only | current | The value of tnRmdIfDdmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in one tenths of a micro-Watt (uW) that triggers a hi-alarm. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.26 | ColumntnRmdIfDdmRxOpticalPowerType | read-only | current | The value of tnRmdIfDdmRxOpticalPowerType indicates whether the tnRmdIfDdmRxOpticalPower was taken as an average, or as an Optical Modulation Amplitude (OMA). |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.27 | ColumntnRmdIfDdmExternallyCalibrated | read-only | current | The value of tnRmdIfDdmExternallyCalibrated indicates whether the SFP was externally calibrated (true) or internally calibrated (false). |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.28 | ColumntnRmdIfDdmExtCalRxPower4 | read-only | current | The value of tnRmdIfDdmExtCalRxPower4 indicates the Rx_PWR(4) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.29 | ColumntnRmdIfDdmExtCalRxPower3 | read-only | current | The value of tnRmdIfDdmExtCalRxPower3 indicates the Rx_PWR(3) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8462 Rev 10.2. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.30 | ColumntnRmdIfDdmExtCalRxPower2 | read-only | current | The value of tnRmdIfDdmExtCalRxPower2 indicates the Rx_PWR(2) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.31 | ColumntnRmdIfDdmExtCalRxPower1 | read-only | current | The value of tnRmdIfDdmExtCalRxPower1 indicates the Rx_PWR(1) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.32 | ColumntnRmdIfDdmExtCalRxPower0 | read-only | current | The value of tnRmdIfDdmExtCalRxPower0 indicates the Rx_PWR(0) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.33 | ColumntnRmdIfDdmExtCalTxLaserBiasSlope | read-only | current | The value of tnRmdIfDdmExtCalTxLaserBiasSlope indicates the Tx_l(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev … |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.34 | ColumntnRmdIfDdmExtCalTxLaserBiasOffset | read-only | current | The value of tnRmdIfDdmExtCalTxLaserBiasOffset indicates the Tx_l(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Re… |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.35 | ColumntnRmdIfDdmExtCalTxPowerSlope | read-only | current | The value of tnRmdIfDdmExtCalTxPowerSlope indicates the Tx_PWR(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10… |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.36 | ColumntnRmdIfDdmExtCalTxPowerOffset | read-only | current | The value of tnRmdIfDdmExtCalTxPowerOffset indicates the Tx_PWR(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev … |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.37 | ColumntnRmdIfDdmExtCalTemperatureSlope | read-only | current | The value of tnRmdIfDdmExtCalTemperatureSlope indicates the T(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.… |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.38 | ColumntnRmdIfDdmExtCalTemperatureOffset | read-only | current | The value of tnRmdIfDdmExtCalTemperatureOffset indicates the T(Offset) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 1… |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.39 | ColumntnRmdIfDdmExtCalVoltageSlope | read-only | current | The value of tnRmdIfDdmExtCalVoltageSlope indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
| 1.3.6.1.4.1.7483.6.4.1.3.7.1.40 | ColumntnRmdIfDdmExtCalVoltageOffset | read-only | current | The value of tnRmdIfDdmExtCalVoltageOffset indicates the V(Slope) value as specified in Table 3.16 in the SFF Committee Standard's document SFF-8472 Rev 10.2. |
| 1.3.6.1.4.1.7483.6.4.1.3.8 | TabletnRmdIfLoopbackTable | not-accessible | current | A table containing the loopback data of all interfaces of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.8.1 | RowtnRmdIfLoopbackEntry | not-accessible | current | A list of objects containing the loopback data of an interface of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.8.1.1 | ColumntnRmdIfLoopbackIn | read-write | current | Indicates whether an ingoing loopback is enabled for the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.8.1.2 | ColumntnRmdIfLoopbackOut | read-write | current | Indicates whether an outgoing loopback is enabled for the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.8.1.3 | ColumntnRmdIfEvcLoopBack | read-write | current | Indicates whether an EVC(flow) loopback is enabled for the interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.8.1.4 | ColumntnRmdIfEvcLoopBackVlanId | read-write | current | The ID of the VLAN to which the EVC-loopback is related. |
| 1.3.6.1.4.1.7483.6.4.1.3.10 | TabletnRmdIfCountersTable | not-accessible | current | A table containing the counters of all interfaces of all RMDs. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1 | RowtnRmdIfCountersEntry | not-accessible | current | A list of objects containing the counters of all interfaces of an RMD. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.1 | ColumntnRmdIfCountersRxNrCorrectFrames | read-only | current | Number of correctly received frames for this interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.2 | ColumntnRmdIfCountersRxNrCorrectBytes | read-only | current | Number of correctly received bytes for this interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.3 | ColumntnRmdIfCountersRxNrErroredFcsFrames | read-only | current | Number of received frames for this interface which were errored FCS frames. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.4 | ColumntnRmdIfCountersRxNrLengthErrorOrOtherErrorFrames | read-only | current | Number of received frames for this interface which had a length or other error. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.5 | ColumntnRmdIfCountersRxNrDiscardedFrames | read-only | current | Number of received frames for this interface which were discarded. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.6 | ColumntnRmdIfCountersRxNrDroppedQueueOverflowFrames | read-only | current | Number of received frames for this interface which were dropped due to queue overflow. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.7 | ColumntnRmdIfCountersTxNrFrames | read-only | current | Number of transmitted frames for this interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.8 | ColumntnRmdIfCountersTxNrBytes | read-only | current | Number of transmitted bytes for this interface. |
| 1.3.6.1.4.1.7483.6.4.1.3.10.1.9 | ColumntnRmdIfCountersReset | read-write | current | Setting of this object to 'true' invokes a reset of the counters for this interface. Setting of this object to value 'false' has no effect. This object is mere… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TnRmdAutoNegotiationConfigState | INTEGER { anStatusEnabled(1), anStatusDisabled(2), anStatusNotAvailable(254), anStatusNotApplicable(255) } | current | The auto-negotiation states of an interface of an RMD. |
| TnRmdAutoNegotiationStatus | INTEGER { anStatusError(0), anStatusConfiguring(1), anStatusComplete(2), anStatusDisabled(3), anStatusParallelDetectFail(4), anStatusNotAvailable(254), anStatusNotApplicable(255) } | current | The auto-negotiation read-only status of an interface of an RMD. |
| TnRmdDuplexMode | INTEGER { duplexHalf(0), duplexFull(1), duplexAuto(2), duplexNotAvailable(254), duplexNotApplicable(255) } | current | Represents a duplex mode of an interface of an RMD. |
| TnRmdFrameForwardingMode | INTEGER { ffmStoreAndForward(0), ffmCutThrough(1), ffmNotApplicable(255) } | current | The frame forwarding mode of an RMD. |
| TnRmdIfOperationalState | INTEGER { down (0), up (1) } | current | Represents the operational state of an interface down : the interface is operationally down. up : the interface is operationally up. |
| TnRmdInterfaceSpeed | INTEGER { ifSpeedTenMbs(0), ifSpeedHundredMbs(1), ifSpeedOneGbs(2), ifSpeedTenGbs(3), ifSpeedAuto(4), ifSpeedNotAvailable(254), ifSpeedNotApplicable(255) } | current | The speed of an interface of an RMD. |
| TnRmdLoopbackMode | INTEGER { loopbackDiagnosticMode(0), loopbackReplaceMode(1), loopbackSwapMode(2), loopbackNotAvailable(254), loopbackNotApplicable(255) } | current | Loopback modes. - loopbackDiagnosticMode : Unchanged source and destination MAC addresses. - loopbackReplaceMode : The destination MAC address is copied from the source MAC address, and the source MAC address is replace… |
| TnRmdLptStatus | INTEGER { lptStatusUp(1), lptStatusDown(2), lptStatusNotApplicable(255) } | current | The Link Pass-Through status of an interface of an RMD. |
| TnRmdMasterSlaveRole | INTEGER { msMaster(0), msSlave(1), msAuto(2), msNotAvailable(254), msNotApplicable(255) } | current | Represents a master-slave role of an interface of an RMD. |
| TnRmdMdixMode | INTEGER { mdi(0), mdix(1), mdiNotAvailable(254), mdiNotApplicable(255) } | current | Represents the MDI/MDIX mode of an RMD. |
| TnRmdNimDirection | INTEGER { nimRx(0), nimTx(1) } | current | NIM direction. |
| TnRmdPauseMode | INTEGER { pauseDisabled(0), pauseEnabled(1), pauseTxEnabledRxDisabled(2), pauseTxDisabledRxEnabled(3), pauseAuto(4), pauseNotAvailable(254), pauseNotApplicable(255) } | current | Represents a pause mode of an interface of an RMD. |
| TnRmdTrafficState | INTEGER { trafficStateEnabled(1), trafficStateDisabled(2), trafficStateNotAvailable(254), trafficStateNotApplicable(255) } | current | Traffic state of an interface of an RMD. |