TROPIC-IEEE8023br-MIB
40 objects
Initial version, IEEE 802.3br-2016 MIB definition.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| TN-TC-MIB | TmnxPortID |
| TROPIC-GLOBAL-REG | tnIEEE8023brMIB tnPortModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7483.1.1.2.2.4.9 | IdentitytnIEEE8023brMibModule | Initial version, IEEE 802.3br-2016 MIB definition. | ||
| 1.3.6.1.4.1.7483.2.2.4.11.0 | NodetnIEEE8023brEquipmentObjectsNotifications | |||
| 1.3.6.1.4.1.7483.2.2.4.11.1 | NodetnIEEE8023brObjects | |||
| 1.3.6.1.4.1.7483.2.2.4.11.1.1 | NodetnIEEE8023brObjectsParameters | |||
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.1 | TablelldpXdot3LocSystemsGroupTable | not-accessible | current | LLDP Local System Group. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.1.1 | RowlldpXdot3LocSystemsGroupEntry | not-accessible | current | Entry in lldpXdot3LocSystemsGroupTable |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.1.1.1 | ColumnaLldpXdot3LocPortID | not-accessible | current | aLldpXdot3LocPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.1.1.2 | ColumnaLldpXdot3LocPreemptSupported | read-only | current | A read-only Boolean value used to indicate whether the given port (associated with the local System) supports the preemption capability. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.1.1.3 | ColumnaLldpXdot3LocPreemptEnabled | read-only | current | A read-only Boolean value used to indicate whether the preemption capability is enabled on the given port associated with the local System. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.1.1.4 | ColumnaLldpXdot3LocPreemptActive | read-only | current | A read-only Boolean value used to indicate whether the preemption capability is active on the given port associated with the local System. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.1.1.5 | ColumnaLldpXdot3LocAddFragSize | read-create | current | A 2-bit integer value used to indicate the minimum size of non-final fragments supported by the receiver on the given port associated with the local System. Th… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.2 | TablelldpXdot3RemSystemsGroupTable | not-accessible | current | LLDP Remote System Group. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.2.1 | RowlldpXdot3RemSystemsGroupEntry | not-accessible | current | Entry in lldpXdot3RemSystemsGroupTable |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.2.1.1 | ColumnaLldpXdot3RemPortID | not-accessible | current | aLldpXdot3RemPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.2.1.2 | ColumnaLldpXdot3RemPreemptSupported | read-only | current | A read-only Boolean value used to indicate whether the given port (associated with the remote system) supports the preemption capability. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.2.1.3 | ColumnaLldpXdot3RemPreemptEnabled | read-only | current | A read-only Boolean value used to indicate whether the preemption capability is enabled on the given port associated with the remote system. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.2.1.4 | ColumnaLldpXdot3RemPreemptActive | read-only | current | A read-only Boolean value used to indicate whether the preemption capability is active on the given port associated with the remote system. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.2.1.5 | ColumnaLldpXdot3RemAddFragSize | read-only | current | A 2-bit integer value used to indicate, in units of 64 octets, the minimum number of octets over 64 octets required in non-final fragments by the receiver on t… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3 | TablemacMergeEntityTable | not-accessible | current | MACMergeEntity managed object. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1 | RowmacMergeEntityEntry | not-accessible | current | Entry in MACMergeEntityTable |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.1 | ColumnaMACMergePortID | not-accessible | current | aMACMergePortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.2 | ColumnaMACMergeSupport | read-only | current | This attribute indicates (when accessed via a GET operation) whether the given device supports a MAC Merge sublayer. The SET operation shall have no effect on … |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.3 | ColumnaMACMergeStatusVerify | read-only | current | This attribute indicates (when accessed via a GET operation) the status of the MAC Merge sublayer verification on the given device. The SET operation shall hav… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.4 | ColumnaMACMergeEnableTx | read-create | current | This attribute indicates (when accessed via a GET operation) the status of the MAC Merge sublayer on the given device in the transmit direction. The status of … |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.5 | ColumnaMACMergeVerifyDisableTx | read-create | current | This attribute indicates (when accessed via a GET operation) the status of the Verify function of MAC Merge sublayer on the given device in the transmit direct… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.6 | ColumnaMACMergeStatusTx | read-only | current | This attribute indicates (when accessed via a GET operation) the status of the MAC Merge sublayer on the given device in the transmit direction. The SET operat… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.7 | ColumnaMACMergeVerifyTime | read-create | current | The value of this attribute defines the nominal wait time between verification attempts in milliseconds. Valid range is 1 to 128 inclusive. The default value i… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.8 | ColumnaMACMergeAddFragSize | read-create | current | A 2-bit integer value used to indicate the value of addFragSize variable used by the Transmit Processing State Diagram. |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.9 | ColumnaMACMergeFrameAssErrorCount | read-only | current | A count of MAC frames with reassembly errors. The counter is incremented by one every time the ASSEMBLY_ERROR state in the Receive Processing State Diagram is … |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.10 | ColumnaMACMergeFrameSmdErrorCount | read-only | current | A count of received MAC frames / MAC frame fragments rejected due to unknown SMD value or arriving with an SMD-C when no frame is in progress. The counter is i… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.11 | ColumnaMACMergeFrameAssOkCount | read-only | current | A count of MAC frames that were successfully reassembled and delivered to MAC. The counter is incremented by one every time the FRAME_COMPLETE state in the Rec… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.12 | ColumnaMACMergeFragCountRx | read-only | current | A count of the number of additional mPackets received due to preemption. The counter is incremented by one every time the state CHECK_FRAG_CNT in the Receive P… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.13 | ColumnaMACMergeFragCountTx | read-only | current | A count of the number of additional mPackets transmitted due to preemption. This counter is incremented by one every time the SEND_SMD_C state in the Transmit … |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.14 | ColumnaMACMergeHoldCount | read-only | current | A count of the number of times the variable hold (see 99.4.7.3) transitions from FALSE to TRUE. This counter has a maximum increment rate of 160 000 counts per… |
| 1.3.6.1.4.1.7483.2.2.4.11.1.1.3.1.15 | ColumnaMACMergeAcctPolicyId | read-create | current | The value of the accounting policy must be defined prior to associating the policy with the mmac port. Accounting policies can only be associated with network … |
| 1.3.6.1.4.1.7483.2.2.4.11.2 | NodetnIEEE8023brObjectsConformance | |||
| 1.3.6.1.4.1.7483.2.2.4.11.2.1 | Nodeieee8023brCompliances | |||
| 1.3.6.1.4.1.7483.2.2.4.11.2.1.1 | Complianceieee8023brCompliance | current | The compliance statement for devices supporting IEEE 802.3br. | |
| 1.3.6.1.4.1.7483.2.2.4.11.2.2 | Nodeieee8023brGroups | |||
| 1.3.6.1.4.1.7483.2.2.4.11.2.2.1 | Groupieee8023brGroup | current | Objects that allow management of IEEE 802.3br. |