TROPIC-ROE-MIB
135 objects
The ROE Managed Solution MIB.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION |
| TN-TC-MIB | TItemDescription TmnxPortID |
| TROPIC-GLOBAL-REG | tnPortModules tnRoeMib |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7483.1.1.2.2.4.10 | IdentitytnRoeMibModule | of | The ROE Managed Solution MIB. | |
| 1.3.6.1.4.1.7483.2.2.4.12.0 | NodetnRoeNotifications | |||
| 1.3.6.1.4.1.7483.2.2.4.12.1 | NodetnRoeObjects | |||
| 1.3.6.1.4.1.7483.2.2.4.12.1.1 | NodetnRoeParameters | |||
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1 | TabletnRoeSeqProfTable | not-accessible | current | Roe sequence number table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1 | RowtnRoeSeqProfEntry | not-accessible | current | Entry in tnRoeSeqTable table. The seq-num-profile is used to specifie the composition of the sequence number field in RoE header for the RoE packets. By defaul… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.1 | ColumntnRoeSeqProfCardType | not-accessible | current | The card type for TPS. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.2 | ColumntnRoeSeqProfPortID | not-accessible | current | tnRoeSeqProfPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.3 | ColumntnRoeSeqProfID | not-accessible | current | The sequency number profile id, unique within a roe entity. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.4 | ColumntnRoeSeqProfDescription | read-create | current | The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special charact… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.5 | ColumntnRoeSeqProfType | read-create | current | The type of the composition of sequence number file in RoE header. frmrNum - Use 28-bit (BFN,HFN,bFN) in the Sequence number field. Bit 0-4 are zeroes. Bit 5-1… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.6 | ColumntnRoeSeqProfPMax | read-create | current | Applicable only when seq-num-type = frmrnum. It configures the maximum numerical value of the p-counter field. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.7 | ColumntnRoeSeqProfPIncProp | read-create | current | Applicable only when seq-num-type = frmrnum. It configures the method to increment the p-counter. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.8 | ColumntnRoeSeqProfPInc | read-create | current | Applicable only when seq-num-type = frmrnum. It configures the increment value of p-counter on every sent packet. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.9 | ColumntnRoeSeqProfQMax | read-create | current | Applicable only when seq-num-type = frmrnum. It configures the maximum numerical value of the q-counter field. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.10 | ColumntnRoeSeqProfQIncProp | read-create | current | Applicable only when seq-num-type = frmrnum. This command enables to increment the q-counter. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.11 | ColumntnRoeSeqProfQInc | read-create | current | Applicable only when seq-num-type = frmrnum. This command enables to increment the q-counter. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.12 | ColumntnRoeSeqProfRowStatus | read-create | current | The value of tnRoeEthlinkRowStatus defines the status of the row. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2 | TabletnRoeTable | not-accessible | current | Roe table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1 | RowtnRoeEntry | not-accessible | current | Entry in Roe table. The roe entity is automatically created when the client interface of CPRI/OBSAI type with the mapping type = tunneling / structure-agnostic… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.1 | ColumntnRoeCardType | not-accessible | current | The card type for TPS. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.2 | ColumntnRoePortID | not-accessible | current | tnRoePortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.3 | ColumntnRoeDescription | read-create | current | The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special charact… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.4 | ColumntnRoeOrderInfoType | read-create | current | The orderInfo field in RoE header. This parameter can be modified only when roe is shutdown. prestime - Presentation Time filled in OrderInfo field of RoE head… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.5 | ColumntnRoePresTimeOffset | read-create | current | The time in the unit of 1/100 of nanosecond. 0 is a specical value, which means the offset is automatically adjusted by the RoE mapper based on the latency mea… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.6 | ColumntnRoeCpriTxGenOffset | read-create | current | The time in the unit of 1/100 of nanosecond. Applicable only when order-info-type is set to seq-num. Specifies the offset time to start the transmission of CPR… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.7 | ColumntnRoeAutoUponChange | read-create | current | Enable the automatic adjustment of ts-gen-offset when the network delay changes due to the topology change, e.g., protection switch. Applicable only when order… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.8 | ColumntnRoeSeqNumProfID | read-create | current | Applicable only when order-info-type is set to seq-num. Associate a sequence number profile with the RoE entity. This paramete can be modified only when roe is… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.9 | ColumntnRoeInitialTxBFN | read-create | current | The BFN in the initial Hyperframe control word at CPRI egress. Applicable only when order-info-type is set to seq-num. It configures the bfn (BFN field in CPRI… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.10 | ColumntnRoeInitialTxHFN | read-create | current | HFN in the next hyperframe control word. Aplicable only when order-info-type is set to seq-num. It specifies the HFN in initial CPRI hyperframe control word at… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.11 | ColumntnRoeEncapMode | read-only | current | tunneling - 10B or 66B line codes are encapsulted into RoE packets. linecodeAware - CPRI basic frames in 8B or 64B symbols removing the line coding and (if any… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.12 | ColumntnRoeAdminState | read-create | current | up - The administrative state is up. down - The administrative state is down. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.13 | ColumntnRoePmonPolicy | read-create | current | PMON policy id assoicated to the RoE. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.14 | ColumntnRoeRowStatus | read-create | current | The value of tnRoeRowStatus defines the status of the row. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.15 | ColumntnRoeAlmProfName | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.16 | ColumntnRoePresTimeOffsetSubNano | read-create | current | The time in the unit of 1/32 of nanosecond. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.17 | ColumntnRoePresTimeOffsetNano | read-create | current | The time in the unit of nanosecond. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.18 | ColumntnRoeTargetOffsetSubNano | read-create | current | The time in the unit of 1/32 of nanosecond for provisioned target delay.The parameter is available only when CPRI port is set to structure-aware mode. Represen… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.19 | ColumntnRoeTargetOffsetNano | read-create | current | The time is in the unit of nanosecond for provisioned target delay. The parameter is available only when CPRI port is set to structure-aware mode. Represent th… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.20 | ColumntnRoeMapperSampleWidth | read-create | current | The parameter is available only when CPRI port is set to structure-aware mode. This command configures the IQ sample width in the CPRI link as a parameter for … |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.21 | ColumntnRoeDeMapperSampleWidth | read-create | current | The parameter is available only when CPRI port is set to structure-aware mode. This command configures the IQ sample width in the CPRI link as a global paramet… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.24 | ColumntnRoePPointer | read-create | current | The parameter is available only when CPRI port is set to structure-aware mode. Specifies p-pointer value for the fast C&M channel in CPRI link associated with … |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.25 | ColumntnRoeCpriProtocolVer | read-create | current | CPRI protocol version |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.26 | ColumntnRoeMapperStatusEnable | read-create | current | The parameter is available only when CPRI port is set to structure-aware mode and applies to RoE entity for a CPRI port. When enabled: (1) RoE entity disregard… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.27 | ColumntnRoeSlowcmRate | read-create | current | The parameter is available only when CPRI port is set to structure-aware mode. This command indicates rate of slow C&M channel in CPRI link. When slow C&M is n… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3 | TabletnRoeMapperTable | not-accessible | current | Roe Mapper table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1 | RowtnRoeMapperEntry | not-accessible | current | Entry in Roe Mapper table. It creates or edits a mapper of structure-agnostic type when the encap-mode of the corresponding roe is structure-agnostic. In struc… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.1 | ColumntnRoeMapperCardType | not-accessible | current | The card type for TPS. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.2 | ColumntnRoeMapperPortID | not-accessible | current | tnRoePortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.3 | ColumntnRoeMapperID | not-accessible | current | Specifies the mapper id, unique within a roe entity. 1 - when structure-agnostic mode (tunneling or line-coding aware) is selected. 1..80 - when structure-awar… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.4 | ColumntnRoeMapperDescription | read-create | current | The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special charact… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.5 | ColumntnRoeMapperFlowID | read-create | current | This command configures the flowid used in 'flowID' field in RoE header. flowid has no default value, and must be specified by the user. This parameter can be … |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.6 | ColumntnRoeMappeEtherlinkID | read-create | current | Specifies the ethlink id, used to configure the ethernet frame header. This parameter has no default value. It must be explicitly configured. This parameter ca… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.7 | ColumntnRoeMapperPayloadLen | read-create | current | Specifies the length of the payload in RoE packets in bytes after the RoE common header and beforeFCS. For tunneling mode,the payload length can be 1,1.5,2,4,8… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.8 | ColumntnRoeMapperSyncMode | read-create | current | The sync mode to control when to generate the presentation time. Only when the basic frame number and/or bfn/hfn in received CPRI frame matches the basic frame… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.9 | ColumntnRoeMapperBfn | read-create | current | Specifies the bfn used for sync. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.10 | ColumntnRoeMapperHfn | read-create | current | Specifies the bfn used for sync. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.11 | ColumntnRoeMapperBfrm | read-create | current | Specifies the basic frame number used for sync. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.12 | ColumntnRoeMapperShutdown | read-create | current | Shutdown an RoE mapper entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. RoE Mappers must be shut do… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.13 | ColumntnRoeMapperType | read-only | current | The Type of the mapper: Tunneling, linecodeAware, structureAware, structureAwareControl. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.14 | ColumntnRoeMapperOrderInfoType | read-only | current | SeqNum or Presentation Time. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.15 | ColumntnRoeMapperPmonPolicy | read-create | current | PMON policy id assoicated to the RoE Mapper. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.16 | ColumntnRoeMapperRowStatus | read-create | current | The value of tnRoeMapperRowStatus defines the status of the row. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.17 | ColumntnRoeMapperAlmProfName | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.18 | ColumntnRoeMapperSaType | read-create | current | The structure-aware mode mapper or demapper type. <type-id> valid values: 1 = AxC data 2 = fast C&M 3 = slow C&M 4 = VSD raw (covering Ctrl_AxC and VSD) Defaul… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.19 | ColumntnRoeMapperBwID | read-create | current | Specifies bw (currently covering all LTE BW). Valid values: 1 = 1.4MHz 2 = 3MHz 3 = 5MHz 4 = 10MHz 5 = 15MHz 6 = 20MHz This parameter can be modified only when… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.20 | ColumntnRoeMapperPosition | read-create | current | Valid range based on CPRI rate parameter setting: 384..6143 for CPRI-10 160.. 2559 for CPRI-8 128..2047 for CPRI-7 64.. 1023 for CPRI-5 32.. 511 for CPRI-3 |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.21 | ColumntnRoeMapperFrameStartOffset | read-create | current | The parameter is available only when - CPRI port is set to structure-aware mode - sa-type = 1 (for AxC data) Specifies each AxC frame start offset relative to … |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.22 | ColumntnRoeMapperSchanStart | read-create | current | The parameter is available only when - CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the subchannel number… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.23 | ColumntnRoeMapperSchanSize | read-create | current | The parameter is available only when - CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the size of VSD raw g… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.24 | ColumntnRoeMapperPincrement | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.25 | ColumntnRoeMapperNa | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.26 | ColumntnRoeMapperS | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.27 | ColumntnRoeMapperK | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.28 | ColumntnRoeMapperNc | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.29 | ColumntnRoeMapperNv | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4 | TabletnRoeDeMapperTable | not-accessible | current | Roe DeMapper table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1 | RowtnRoeDeMapperEntry | not-accessible | current | Entry in Roe DeMapper table. It creates or edits a demapper of structure-agnostic type when the encap-mode of the corresponding roe is structure-agnostic. In s… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.1 | ColumntnRoeDeMapperCardType | not-accessible | current | The card type for TPS. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.2 | ColumntnRoeDeMapperPortID | not-accessible | current | tnRoeDeMapperPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.3 | ColumntnRoeDeMapperID | not-accessible | current | Specifies the de-mapper id, unique within a roe entity. 1 when structure-agnostic mode (tunneling or line-coding aware) is selected 1..80 when structure-aware … |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.4 | ColumntnRoeDeMapperDescription | read-create | current | The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special charact… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.5 | ColumntnRoeDeMappeEtherlinkID | read-create | current | Specifies the ethlink id, used to configure the ethernet frame header. This parameter has no default value. It must be explicitly configured. This parameter ca… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.6 | ColumntnRoeDeMapperPayloadLen | read-create | current | Specifies the length of the payload in RoE packets in bytes after the RoE common header and before FCS. For tunneling mode, the payload length can be 1,1.5,2,4… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.7 | ColumntnRoeDeMapperSyncMode | read-create | current | This command configures the sync mode to control when to generate the presentation time. Only when the basic frame number and/or bfn/hfn in received CPRI frame… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.8 | ColumntnRoeDeMapperBfn | read-create | current | Specifies the bfn used for sync. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.9 | ColumntnRoeDeMapperHfn | read-create | current | Specifies the bfn used for sync. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.10 | ColumntnRoeDeMapperBfrm | read-create | current | Specifies the basic frame number used for sync. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.11 | ColumntnRoeDeMapperJitterBufferDepth | read-create | current | Specifies the basic frame number used for sync. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.12 | ColumntnRoeDeMapperShutdown | read-create | current | This command administratively disables an RoE mapper entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistic… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.13 | ColumntnRoeDeMapperType | read-only | current | The Type of the mapper: Tunneling, linecodeAware, structureAwareControl. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.14 | ColumntnRoeDeMapperFlowID | read-only | current | The flowid used in 'flowID' field in RoE header. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.15 | ColumntnRoeDeMapperOrderInfoType | read-only | current | The flowid used in 'flowID' field in RoE header. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.16 | ColumntnRoeDeMapperPmonPolicy | read-create | current | PMON policy id assoicated to the RoE DeMapper. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.17 | ColumntnRoeDeMapperRowStatus | read-create | current | The value of tnRoeMapperRowStatus defines the status of the row. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.18 | ColumntnRoeDeMapperAlmProfName | read-create | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.19 | ColumntnRoeDeMapperSaType | read-create | current | The structure-aware mode mapper or demapper type. <type-id> valid values: 1 = AxC data 2 = fast C&M 3 = slow C&M 4 = VSD raw (covering Ctrl_AxC and VSD) Defaul… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.20 | ColumntnRoeDeMapperBwID | read-create | current | Specifies bw (currently covering all LTE BW). Valid values: 1 = 1.4MHz 2 = 3MHz 3 = 5MHz 4 = 10MHz 5 = 15MHz 6 = 20MHz This parameter can be modified only when… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.21 | ColumntnRoeDeMapperPosition | read-create | current | Valid range based on CPRI rate parameter setting: 384..6143 for CPRI-10 160.. 2559 for CPRI-8 128..2047 for CPRI-7 64.. 1023 for CPRI-5 32.. 511 for CPRI-3 |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.22 | ColumntnRoeDeMapperFrameStartOffset | read-create | current | The parameter is available only when - CPRI port is set to structure-aware mode - sa-type = 1 (for AxC data) Specifies each AxC frame start offset relative to … |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.23 | ColumntnRoeDeMapperSchanStart | read-create | current | The parameter is available only when - CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the subchannel number… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.24 | ColumntnRoeDeMapperSchanSize | read-create | current | The parameter is available only when - CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the size of VSD raw g… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.25 | ColumntnRoeDeMapperPincrement | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.26 | ColumntnRoeDeMapperNa | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.27 | ColumntnRoeDeMapperS | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.28 | ColumntnRoeDeMapperK | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.29 | ColumntnRoeDeMapperNc | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.30 | ColumntnRoeDeMapperNv | read-only | current | . |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5 | TabletnRoeEthlinkTable | not-accessible | current | Roe Eth Link table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1 | RowtnRoeEthlinkEntry | not-accessible | current | Entry in Roe DeMapper table. It creates or edits an ethlink entity, which specifies the Ethernet frame header for the RoE packets. The ethlink ID is unique wit… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.1 | ColumntnRoeEthlinkCardType | not-accessible | current | tnRoeEthlinkCardType is an index into this table. It specify the card type for TPS. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.2 | ColumntnRoeEthlinkPortID | not-accessible | current | tnRoeEthlinkPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.3 | ColumntnRoeEthlinkID | not-accessible | current | Specifies the ethlink id, unique within a roe entity. 1..2 when non-structure-aware mode is selected 1..16 when structure-aware mode is selected. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.4 | ColumntnRoeEthlinkDescription | read-create | current | The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special charact… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.5 | ColumntnRoeEthlinkDestMac | read-create | current | Specifies the 48-bit MAC address. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses. {xx:xx:xx:xx:xx:xx | xx-xx-xx-xx… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.6 | ColumntnRoeEthlinkSourceMac | read-create | current | Specifies the 48-bit MAC address of the port. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses. {xx:xx:xx:xx:xx:xx |… |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.7 | ColumntnRoeEthlinkTagDepth | read-create | current | The number of VLAN tags used in the Ethernet frame header. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.8 | ColumntnRoeEthlinkOuterEthertype | read-create | current | The ethertype for the outer tag when double tags are used in Ethernet Frame header, i.e., tag-depth is double. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.9 | ColumntnRoeEthlinkOuterVid | read-create | current | The VLAN ID of the outer VLAN tag in Ethernet Frame Header if double tag is used, i.e., tag-depth is double. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.10 | ColumntnRoeEthlinkOuterPri | read-create | current | Specifies the priority of the outer VLAN tag in Ethernet Frame Header if double tag is used, i.e., tag-depth is double. Default: 7. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.11 | ColumntnRoeEthlinkInnerEthertype | read-create | current | The ethertype for the inner tag when single or double tags are used in Ethernet Frame header, i.e., tag-depth is single or double. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.12 | ColumntnRoeEthlinkInnerVid | read-create | current | The VLAN ID of the inner VLAN tag in Ethernet Frame Header if either single or double tag is used, i.e., tag-depth is single or double. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.13 | ColumntnRoeEthlinkInnerPri | read-create | current | The priority of the inner VLAN tag in Ethernet Frame Header if single or double tag is used, i.e., tag-depth is single or double. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.14 | ColumntnRoeEthlinkEthertype | read-create | current | The ethertype for RoE PDU. |
| 1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.15 | ColumntnRoeEthlinkRowStatus | read-create | current | The value of tnRoeEthlinkRowStatus defines the status of the row. |
| 1.3.6.1.4.1.7483.2.2.4.12.2 | NodetnRoeEConf | |||
| 1.3.6.1.4.1.7483.2.2.4.12.2.1 | NodetnRoeGroups | |||
| 1.3.6.1.4.1.7483.2.2.4.12.2.1.1 | GrouptnRoeSeqProfGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.12.2.1.2 | GrouptnRoeGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.12.2.1.3 | GrouptnRoeMapperGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.12.2.1.4 | GrouptnRoeDeMapperGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.12.2.1.5 | GrouptnRoeEthlinkGroup | current | . | |
| 1.3.6.1.4.1.7483.2.2.4.12.2.2 | NodetnEoeCompliances | |||
| 1.3.6.1.4.1.7483.2.2.4.12.2.2.1 | CompliancetnRoeCompliance | current | . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TropicRoeCardType | INTEGER { t24PS1(1), t24PS2(2), t12PS(3), s24PS1(4), s24PS2(5) } | current | Card Type for TPS products. |