MIB Viewer

VES1724-58V-MIB

1864 objects
ves1724-58v MIB
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressIPv6 InetAddressType
Q-BRIDGE-MIBdot1qVlanIndex PortList VlanIndex
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-SMICounter32 Counter64 enterprises Gauge32 Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
VDSL2-LINE-MIB MISSINGxdsl2LConfProfProfileName xdsl2LineAlarmConfProfileName xdsl2LineBand xdsl2SCStatusBand xdsl2SCStatusDirection
OIDNameAccessStatusDescription
1.3.6.1.4.1.890Nodezyxel
1.3.6.1.4.1.890.1Nodeproducts
1.3.6.1.4.1.890.1.5NodeaccessSwitch
1.3.6.1.4.1.890.1.5.12NodevesSeries
1.3.6.1.4.1.890.1.5.12.49Identityves1724-58vves1724-58v MIB
1.3.6.1.4.1.890.1.5.12.49.1Nodeacl
1.3.6.1.4.1.890.1.5.12.49.1.1ScalaraclMaxNumOfAclPerSystemread-onlycurrentThe maximum number of ACL per system.
1.3.6.1.4.1.890.1.5.12.49.1.2TableaclSystemTablenot-accessiblecurrentConfigures references to specified ACL rule for whole system settings.
1.3.6.1.4.1.890.1.5.12.49.1.2.1RowaclSystemEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.1.2.1.1ColumnaclSystemProfileNameread-onlycurrentConfigures references to specified ACL rule.
1.3.6.1.4.1.890.1.5.12.49.1.2.1.2ColumnaclSystemRowStausread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.1.3ScalaraclMaxNumOfAclPerPortread-onlycurrentThe maximum number of ACL per port.
1.3.6.1.4.1.890.1.5.12.49.1.4TableaclPortTablenot-accessiblecurrentConfigures references to specified ACL rule for the specified port.
1.3.6.1.4.1.890.1.5.12.49.1.4.1RowaclPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.1.4.1.1ColumnaclPortProfileNameread-onlycurrentConfigures references to specified ACL rule.
1.3.6.1.4.1.890.1.5.12.49.1.4.1.2ColumnaclPortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.1.5ScalaraclMaxNumOfAclProfilesread-onlycurrentThe maximum number of ACL profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.1.6TableaclProfileTablenot-accessiblecurrentConfigures ACL profile.
1.3.6.1.4.1.890.1.5.12.49.1.6.1RowaclProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.1.6.1.1ColumnaclProfileNameread-onlycurrent'multicast' reserved.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.2ColumnaclProfileActionMaskread-createcurrentDefines action(s) for the ACL profile. Every acktion mask bit has its own referenced action parameter(s). drop(0) - no action paramter rateLimit(1) - aclProfil…
1.3.6.1.4.1.890.1.5.12.49.1.6.1.3ColumnaclProfileFieldMaskread-createcurrentDefines the compared fields mask for the ACL profile. Every field mask bit has its own referenced field parameter(s). etherType(0) - aclProfileRuleEtype source…
1.3.6.1.4.1.890.1.5.12.49.1.6.1.4ColumnaclProfileRuleEtyperead-createcurrentMatches specified Ether Type.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.5ColumnaclProfileRuleSrcMacread-createcurrentMatches specified source MAC.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.6ColumnaclProfileRuleDestMacread-createcurrentMatches specified destination MAC.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.7ColumnaclProfileRuleSrcOuiread-createcurrentMatches specified source MAC OUI.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.8ColumnaclProfileRuleDestOuiread-createcurrentMatches specified destination MAC OUI.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.9ColumnaclProfileRuleInnerVlanread-createcurrentMatches specified inner VLAN ID.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.10ColumnaclProfileRuleOuterVlanread-createcurrentMatches specified outer VLAN ID.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.11ColumnaclProfileRuleInnerPbitread-createcurrentMatches specified inner VLAN PBIT.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.12ColumnaclProfileRuleOuterPbitread-createcurrentMatches specified outer VLAN PBIT.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.13ColumnaclProfileRuleSrcIpRangeread-createcurrentMatches specified source IP range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.14ColumnaclProfileRuleSrcIpMaskread-createcurrentThe subnet mask of source IP range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.15ColumnaclProfileRuleDestIpRangeread-createcurrentMatches specified destination IP range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.16ColumnaclProfileRuleDestIpMaskread-createcurrentThe subnet mask of destination IP range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.17ColumnaclProfileRuleSrcIpread-createcurrentMatches specified source IP address.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.18ColumnaclProfileRuleDestIpread-createcurrentMatches specified destination IP address.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.19ColumnaclProfileRuleProtocolread-createcurrentMatches specified IP protocol.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.20ColumnaclProfileRuleIpPrecedenceread-createcurrentMatches specified IP precedence.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.21ColumnaclProfileRuleDscpread-createcurrentMatches specified IP DSCP.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.22ColumnaclProfileRuleSrcIpv6read-createcurrentMatches specified source IPv6 address.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.23ColumnaclProfileRuleDestIpv6read-createcurrentMatches specified destination IPv6 address.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.24ColumnaclProfileRuleNextHeaderread-createcurrentMatches specified IPv6 next header.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.25ColumnaclProfileRuleTrafficClassread-createcurrentMatches specified IPv6 traffic class.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.26ColumnaclProfileRuleSrcL4StartPortread-createcurrentMatches specified layer 4 source port range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.27ColumnaclProfileRuleSrcL4EndPortread-createcurrentMatches specified layer 4 source port range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.28ColumnaclProfileRuleDestL4StartPortread-createcurrentMatches specified layer 4 dest port range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.29ColumnaclProfileRuleDestL4EndPortread-createcurrentMatches specified layer 4 dest port range.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.30ColumnaclProfileRuleSrcL4Portread-createcurrentMatches specified layer 4 source port.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.31ColumnaclProfileRuleDestL4Portread-createcurrentMatches specified layer 4 dest port.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.32ColumnaclProfileActionRateread-createcurrentLimits receiving rate of matched packets.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.33ColumnaclProfileActionInnerPbitread-createcurrentChange inner VLAN pbit of matched packets.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.34ColumnaclProfileActionOuterPbitread-createcurrentChange outer VLAN pbit of matched packets.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.35ColumnaclProfileActionDscpread-createcurrentChange IP DSCP of matched packets.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.36ColumnaclProfileActionTrafficClassread-createcurrentChange IPv6 traffic class of matched packets.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.37ColumnaclProfileActionQosread-createcurrentChange Qos of matched packets.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.38ColumnaclProfileRowStatusread-createcurrentRow status of the table entry. 'multicast' reserved.
1.3.6.1.4.1.890.1.5.12.49.1.6.1.39ColumnaclProfilePriorityread-onlycurrentPriority of the ACL profile in hexadecimal.
1.3.6.1.4.1.890.1.5.12.49.1.7NodeaclMulticast
1.3.6.1.4.1.890.1.5.12.49.1.7.1ScalaraclUnsolicitedread-writecurrentControl filter to drop unknown multicast traffic Drop unknown multicast traffic(1) No drop unknown multicast traffic(2)
1.3.6.1.4.1.890.1.5.12.49.1.7.2ScalaraclUpstreamread-writecurrentControl filter to drop unknown multicast traffic from upstream direction Drop multicast traffic from upstream direction (1) No drop multicast traffic from upst…
1.3.6.1.4.1.890.1.5.12.49.1.8NodeaclStormControl
1.3.6.1.4.1.890.1.5.12.49.1.8.1ScalaraclBroadcastread-writecurrentConfigure rate limit for broadcast storm <rate> 2~100000 kbps
1.3.6.1.4.1.890.1.5.12.49.1.8.2ScalaraclDlfread-writecurrentConfigure rate limit for DLF (unknown unicast and multicast) storm <rate> 2~100000 kbps
1.3.6.1.4.1.890.1.5.12.49.1.20Nodedot1x
1.3.6.1.4.1.890.1.5.12.49.1.20.1Scalardot1xEnableread-writecurrentEnable/disable the 802.1x function.
1.3.6.1.4.1.890.1.5.12.49.1.20.2Scalardot1xAuthMethodread-writecurrentConfigure the method for dot1x authentication. userprofile: use local configured user to authenticate user radius: use remote radius server to authenticate use…
1.3.6.1.4.1.890.1.5.12.49.1.20.3Tabledot1xRadiusServerTablenot-accessiblecurrentA table that contains Radius Server information for 802.1x.
1.3.6.1.4.1.890.1.5.12.49.1.20.3.1Rowdot1xRadiusServerEntrynot-accessiblecurrentThe entry of Radius Server table.
1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.1Columndot1xRadiusServerIndexread-onlycurrentThe identity of the RADIUS server.
1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.2Columndot1xRadiusServerIpread-writecurrentThe IP address of the Radius Server.
1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.3Columndot1xRadiusServerPortread-writecurrentThe UDP port of the Radius Server.
1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.4Columndot1xRadiusServerSecretread-writecurrentThe shared secret of the Radius Server.
1.3.6.1.4.1.890.1.5.12.49.1.20.4Tabledot1xPortTablenot-accessiblecurrentThis table includes 802.1x port configuration.
1.3.6.1.4.1.890.1.5.12.49.1.20.4.1Rowdot1xPortEntrynot-accessiblecurrentAn entry in dot1xPortTable.
1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.1Columndot1xPortRadiusServerIndexread-writecurrentThe index of the RADIUS server in dot1xRadiusServerTable
1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.2Columndot1xPortEnableread-writecurrentEnable/disable 802.1x for the port.
1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.3Columndot1xPortCircuitIDEnableread-writecurrentEnable/disable insert the circuit ID information.
1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.4Columndot1xPortCircuitIDInforead-createcurrentConfigures Dot1X circuit ID format Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>?,./ %%: equals character % %…
1.3.6.1.4.1.890.1.5.12.49.1.20.5Tabledot1xUserProfileTablenot-accessiblecurrentThis table includes user profile setting for 802.1x configuration.
1.3.6.1.4.1.890.1.5.12.49.1.20.5.1Rowdot1xUserProfileEntrynot-accessiblecurrentAn entry in dot1xUserProfileTable.
1.3.6.1.4.1.890.1.5.12.49.1.20.5.1.1Columndot1xUserProfileNameread-onlycurrentName of Dot1X user profile
1.3.6.1.4.1.890.1.5.12.49.1.20.5.1.2Columndot1xUserProfilePasswordread-createcurrentConfigure the password. Can input with plain text or ciphertext. plain text: Up to 31 printable characters. ciphertext: 95 characters with special format and g…
1.3.6.1.4.1.890.1.5.12.49.1.20.5.1.3Columndot1xUserProfileRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.1.20.6Tabledot1xStatsPortTablenot-accessiblecurrentThis table includes port statistics of 802.1x .
1.3.6.1.4.1.890.1.5.12.49.1.20.6.1Rowdot1xStatsPortEntrynot-accessiblecurrentAn entry in dot1xStatsPortTable.
1.3.6.1.4.1.890.1.5.12.49.1.20.6.1.1Columndot1xStatsPortReAuthCountread-onlycurrentDisplay how many times each port re-authroize
1.3.6.1.4.1.890.1.5.12.49.1.21TableaclFieldPriorityTablenot-accessiblecurrentConfigures ACL field priority table.
1.3.6.1.4.1.890.1.5.12.49.1.21.1RowaclFieldPriorityEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.1.21.1.1ColumnaclFieldPriorityIndexread-onlycurrentThe field index of field priority table.
1.3.6.1.4.1.890.1.5.12.49.1.21.1.2ColumnaclFieldPriorityValueread-writecurrentThe field priority of field priority table. Accept range:01 to ff in hex.
1.3.6.1.4.1.890.1.5.12.49.1.22TableaclPacketTypeFilterTablenot-accessiblecurrentConfigures ACL packet type filter table.
1.3.6.1.4.1.890.1.5.12.49.1.22.1RowaclPacketTypeFilterEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.1.22.1.1ColumnaclPacketTypeFilterVlanIdread-onlycurrentPacket type filter VLAN ID.
1.3.6.1.4.1.890.1.5.12.49.1.22.1.2ColumnaclPacketTypeFilterActionMaskread-createcurrentDefines action(s) for the packet filter. At least one bit must be set.
1.3.6.1.4.1.890.1.5.12.49.1.22.1.3ColumnaclPacketTypeFilterRowStatusread-createcurrentRow status of the table entry. Remove the entry to accept all packet type for the vlan.
1.3.6.1.4.1.890.1.5.12.49.2Nodealarm
1.3.6.1.4.1.890.1.5.12.49.2.1NodealarmOps
1.3.6.1.4.1.890.1.5.12.49.2.1.1ScalarcurAlarmClearTargetTrapOidread-writecurrentSet target alarm Trap OID for clearing one current alarm.
1.3.6.1.4.1.890.1.5.12.49.2.1.2ScalarcurAlarmClearTargetIndex1read-writecurrentSet target alarm index1 for clearing one current alarm.
1.3.6.1.4.1.890.1.5.12.49.2.1.3ScalarcurAlarmClearTargetIndex2read-writecurrentSet target alarm index2 for clearing one current alarm.
1.3.6.1.4.1.890.1.5.12.49.2.1.4ScalarcurAlarmClearTargetIndex3read-writecurrentSet target alarm index3 for clearing one current alarm.
1.3.6.1.4.1.890.1.5.12.49.2.1.5ScalaralarmOperationread-writecurrentIts value will be set to zero after operation finished.
1.3.6.1.4.1.890.1.5.12.49.2.2TablecurrAlarmTablenot-accessiblecurrentDisplays current alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1RowcurrAlarmEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.2.2.1.1ColumncurrAlarmIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.2ColumncurrAlarmCondIdread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.2.2.1.3ColumncurrAlarmOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.4ColumncurrAlarmTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.5ColumncurrAlarmParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.6ColumncurrAlarmParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.7ColumncurrAlarmParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.8ColumncurrAlarmParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.9ColumncurrAlarmParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.10ColumncurrAlarmParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.11ColumncurrAlarmParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.12ColumncurrAlarmParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.13ColumncurrAlarmParam9read-onlycurrentThe 9th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.14ColumncurrAlarmTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.890.1.5.12.49.2.2.1.15ColumncurrAlarmSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.2.1.16ColumncurrAlarmDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3TablehistAlarmTablenot-accessiblecurrentDisplays alarm history.
1.3.6.1.4.1.890.1.5.12.49.2.3.1RowhistAlarmEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.2.3.1.1ColumnhistAlarmIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.2ColumnhistAlarmCondIdread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.2.3.1.3ColumnhistAlarmOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.4ColumnhistAlarmTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.5ColumnhistAlarmParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.6ColumnhistAlarmParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.7ColumnhistAlarmParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.8ColumnhistAlarmParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.9ColumnhistAlarmParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.10ColumnhistAlarmParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.11ColumnhistAlarmParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.12ColumnhistAlarmParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.13ColumnhistAlarmParam9read-onlycurrentThe 9th parameter of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.14ColumnhistAlarmTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.890.1.5.12.49.2.3.1.15ColumnhistAlarmSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.3.1.16ColumnhistAlarmDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.890.1.5.12.49.2.4TablealarmConfTablenot-accessiblecurrentConfigures specified alarm definition. No show event alarm.
1.3.6.1.4.1.890.1.5.12.49.2.4.1RowalarmConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.2.4.1.1ColumnalarmConfTrapOidread-onlycurrentalarm condition code
1.3.6.1.4.1.890.1.5.12.49.2.4.1.2ColumnalarmConfSeverityread-writecurrentalarm severity. event(5): No permit editing the severity of alarm with event severity. Read-only. No permit editing the alarm severity to be event.
1.3.6.1.4.1.890.1.5.12.49.2.4.1.3ColumnalarmConfLogFacilityread-writecurrentalarm syslog-facility
1.3.6.1.4.1.890.1.5.12.49.2.4.1.4ColumnalarmConfTargetread-writecurrentalarm issue target
1.3.6.1.4.1.890.1.5.12.49.2.5ScalaralarmSeveritySystemread-writecurrentConfigures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for overall system.
1.3.6.1.4.1.890.1.5.12.49.2.6TablealarmSeverityPortTablenot-accessiblecurrentConfigures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for each port.
1.3.6.1.4.1.890.1.5.12.49.2.6.1RowalarmSeverityPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.2.6.1.1ColumnalarmSeverityPortThreshread-writecurrent
1.3.6.1.4.1.890.1.5.12.49.2.7NodealarmControl
1.3.6.1.4.1.890.1.5.12.49.2.7.1ScalarsysAlarmSuppressEnableread-writecurrentEnable means no alarm trap will be sent. Only trap of alarm with event severity can be reported. Disable means no suppress.
1.3.6.1.4.1.890.1.5.12.49.2.8TableexternalAlarmTablenot-accessiblecurrentConfigures alarm input description.
1.3.6.1.4.1.890.1.5.12.49.2.8.1RowexternalAlarmEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.2.8.1.1ColumnexternalAlarmIndexread-onlycurrentExternal alarm index
1.3.6.1.4.1.890.1.5.12.49.2.8.1.2ColumnexternalAlarmNameread-writecurrentExternal alarm name
1.3.6.1.4.1.890.1.5.12.49.3Nodedhcp
1.3.6.1.4.1.890.1.5.12.49.3.1TabledhcpL2agTablenot-accessiblecurrentA table that contains DHCP L2 agent configuration.
1.3.6.1.4.1.890.1.5.12.49.3.1.1RowdhcpL2agEntrynot-accessiblecurrentAn entry of dhcpL2agTable.
1.3.6.1.4.1.890.1.5.12.49.3.1.1.1ColumndhcpL2agVlanIdread-onlycurrentSpecify the VLAN with DHCP transparent or DHCP L2 Agent function
1.3.6.1.4.1.890.1.5.12.49.3.1.1.2ColumndhcpL2agModeread-createcurrentSpecify the DHCP mode dhcpTransparent(1) - DHCP packets are transparent dhcpL2Agent(2) - DHCP L2 Agent function is enabled
1.3.6.1.4.1.890.1.5.12.49.3.1.1.3ColumndhcpL2agLdraEnableread-createcurrentEnable/disable LightWeight DHCPv6 Relay agent in l2agent mode
1.3.6.1.4.1.890.1.5.12.49.3.1.1.4ColumndhcpL2agOpt18CircuitIDEnableread-createcurrentEnable/disable insert the option18 circuit ID to DHCP packet in l2agent mode.
1.3.6.1.4.1.890.1.5.12.49.3.1.1.5ColumndhcpL2agOpt18CircuitIDInforead-createcurrentUser specific DHCP option18 circuit ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>?,./ %%: equals cha…
1.3.6.1.4.1.890.1.5.12.49.3.1.1.6ColumndhcpL2agOpt37RemoteIDEnableread-createcurrentEnable/disable insert the option37 remote ID to DHCP packet in l2agent mode.
1.3.6.1.4.1.890.1.5.12.49.3.1.1.7ColumndhcpL2agOpt37RemoteIDInforead-createcurrentUser specific DHCP option37 remote ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>?,./ %%: equals char…
1.3.6.1.4.1.890.1.5.12.49.3.1.1.8ColumndhcpL2agOpt82CircuitIDEnableread-createcurrentEnable/disable insert the option82 circuit ID to DHCP packet in l2agent mode.
1.3.6.1.4.1.890.1.5.12.49.3.1.1.9ColumndhcpL2agOpt82CircuitIDInforead-createcurrentUser specific DHCP option82 circuit ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>?,./ %%: equals cha…
1.3.6.1.4.1.890.1.5.12.49.3.1.1.10ColumndhcpL2agOpt82RemoteIDEnableread-createcurrentEnable/disable insert the option82 remote ID to DHCP packet in l2agent mode.
1.3.6.1.4.1.890.1.5.12.49.3.1.1.11ColumndhcpL2agOpt82RemoteIDInforead-createcurrentUser specific DHCP option82 remote ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>?,./ %%: equals char…
1.3.6.1.4.1.890.1.5.12.49.3.1.1.12ColumndhcpL2agRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.3.2NodedhcpSnoop
1.3.6.1.4.1.890.1.5.12.49.3.2.1TabledhcpSnoopPortTablenot-accessiblecurrentA table that contains DHCP Snoop configuration for specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.1.1RowdhcpSnoopPortEntrynot-accessiblecurrentConfigures DHCP snooping for specified ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.1.1.1ColumndhcpSnoopPortIpMacBindingEnableread-writecurrentEnables IP-MAC binding on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.1.1.2ColumndhcpSnoopPortMaxLeaseCountread-writecurrentConfigures DHCP Snooping database max lease count for specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.1.1.3ColumndhcpSnoopPortDbFlushread-writecurrentSet 1 to flush DHCP database for specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.2ScalardhcpSnoopOverflowModeread-writecurrentConfigures DHCP Snooping database overflow handling mode.
1.3.6.1.4.1.890.1.5.12.49.3.2.3TabledhcpSnoopDbTablenot-accessiblecurrentA table that contains DHCP Snoop database on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.3.1RowdhcpSnoopDbEntrynot-accessiblecurrentShow DHCP database on specified ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.1ColumndhcpSnoopDbIpTyperead-onlycurrentIP address type, IPv6 or IPv4.
1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.2ColumndhcpSnoopDbIpread-onlycurrentShow the IP address in the DHCP database on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.3ColumndhcpSnoopDbVidread-onlycurrentShow the vid in the DHCP database on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.4ColumndhcpSnoopDbMacread-onlycurrentShow the MAC address in the DHCP database on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.4TabledhcpSnoopStatsTablenot-accessiblecurrentA table that contains DHCP stats on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1RowdhcpSnoopStatsEntrynot-accessiblecurrentshow DHCP stats on specified ports.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.1ColumndhcpSnoopStatsOverFlowread-onlycurrentShow the counter when occurs overflow in DHCPv4 and DHCPv6.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.2ColumndhcpSnoopStatsV4Discoverread-onlycurrentShow the number of DHCPv4 Discover packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.3ColumndhcpSnoopStatsV4Offerread-onlycurrentShow the number of DHCPv4 Offer packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.4ColumndhcpSnoopStatsV4Requestread-onlycurrentShow the number of DHCPv4 Request packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.5ColumndhcpSnoopStatsV4Ackread-onlycurrentShow the number of DHCPv4 Ack packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.6ColumndhcpSnoopStatsV4Releaseread-onlycurrentShow the number of DHCPv4 Release packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.7ColumndhcpSnoopStatsV6Solicitread-onlycurrentShow the number of DHCPv6 Solicit packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.8ColumndhcpSnoopStatsV6Advertiseread-onlycurrentShow the number of DHCPv6 Advertise packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.9ColumndhcpSnoopStatsV6Requestread-onlycurrentShow the number of DHCPv6 Request packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.10ColumndhcpSnoopStatsV6Replyread-onlycurrentShow the number of DHCPv6 Reply packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.11ColumndhcpSnoopStatsV6Renewread-onlycurrentShow the number of DHCPv6 Renew packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.12ColumndhcpSnoopStatsV6Rebindread-onlycurrentShow the number of DHCPv6 Rebind packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.13ColumndhcpSnoopStatsV6Releaseread-onlycurrentShow the number of DHCPv6 Release packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.14ColumndhcpSnoopStatsV6RelayForwardread-onlycurrentShow the number of DHCPv6 Relay Forward packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.15ColumndhcpSnoopStatsV6RelayReplyread-onlycurrentShow the number of DHCPv6 Relay Reply packets.
1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.16ColumndhcpSnoopStatsClearread-writecurrentSet 1 to clear all the counter in dhcpSnoopStatsTable.
1.3.6.1.4.1.890.1.5.12.49.3.4NodedhcpTest
1.3.6.1.4.1.890.1.5.12.49.3.4.1ScalardhcpTestPortread-writecurrentSetting the port of the test DHCP session.
1.3.6.1.4.1.890.1.5.12.49.3.4.2ScalardhcpTestChannelread-writecurrentSetting the channel type of the test DHCP session.
1.3.6.1.4.1.890.1.5.12.49.3.4.3ScalardhcpTestUniVlanModeread-writecurrentSetting the UNI VLAN mode of the test DHCP session.
1.3.6.1.4.1.890.1.5.12.49.3.4.4ScalardhcpTestUniVlanread-writecurrentSetting the UNI VLAN of the test DHCP session.
1.3.6.1.4.1.890.1.5.12.49.3.4.5ScalardhcpTestTyperead-writecurrentSetting the type of the test DHCP session.
1.3.6.1.4.1.890.1.5.12.49.3.4.6ScalardhcpTestOpsread-writecurrentSet the object to 1 to test DHCP session.
1.3.6.1.4.1.890.1.5.12.49.3.4.7ScalardhcpTestStatusread-onlycurrentDisplay status of testing DHCP session.
1.3.6.1.4.1.890.1.5.12.49.4Nodege
1.3.6.1.4.1.890.1.5.12.49.4.1TablegeConfTablenot-accessiblecurrentConfigures for the specified GE-NNI ports.
1.3.6.1.4.1.890.1.5.12.49.4.1.1RowgeConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.4.1.1.1ColumngeConfNameread-writecurrentSets a name for the port(s).
1.3.6.1.4.1.890.1.5.12.49.4.1.1.2ColumngeConfSpeedDuplexread-writecurrentConfigures GE speed and duplex mode auto(1) - auto negotiation (both Copper and SFP PHY) halfx10(2) - 10Base-T half duplex mode (Copper) fullx10(3) - 10Base-T …
1.3.6.1.4.1.890.1.5.12.49.4.1.1.3ColumngeConfAlarmProfread-writecurrentSets ENET alarm profile for the port(s).
1.3.6.1.4.1.890.1.5.12.49.4.1.1.4ColumngeLinkStatusread-onlycurrentdisplays GE speed and duplex mode inactive(0) - inactive linkdown(1) - link down halfx10(2) - 10Base-T half duplex mode (Copper) fullx10(3) - 10Base-T full dup…
1.3.6.1.4.1.890.1.5.12.49.4.1.1.5ColumngeUtilTxCurrentPercentread-onlycurrentGE current utilization in 0.01 percentage(100 = 1.00%).
1.3.6.1.4.1.890.1.5.12.49.4.1.1.6ColumngeUtilTxCurrentSpeedread-onlycurrentGE current utilization in kbps.
1.3.6.1.4.1.890.1.5.12.49.4.1.1.7ColumngeUtilRxCurrentPercentread-onlycurrentGE current utilization in 0.01 percentage(100 = 1.00%).
1.3.6.1.4.1.890.1.5.12.49.4.1.1.8ColumngeUtilRxCurrentSpeedread-onlycurrentGE current utilization in kbps.
1.3.6.1.4.1.890.1.5.12.49.4.1.1.9ColumngeUtilTxIssueLvl1Thresholdread-writecurrentGE utilization alarm issue level one threshold for tx direction, the threshold value of level two should be higher than level one.
1.3.6.1.4.1.890.1.5.12.49.4.1.1.10ColumngeUtilTxIssueLvl2Thresholdread-writecurrentGE utilization alarm issue level two threshold for tx direction, the threshold value of level two should be higher than level one.
1.3.6.1.4.1.890.1.5.12.49.4.1.1.11ColumngeUtilRxIssueLvl1Thresholdread-writecurrentGE utilization alarm level one threshold for rx direction, the threshold value of level two should be higher than level one.
1.3.6.1.4.1.890.1.5.12.49.4.1.1.12ColumngeUtilRxIssueLvl2Thresholdread-writecurrentGE utilization alarm level two threshold for rx direction, the threshold value of level two should be higher than level one.
1.3.6.1.4.1.890.1.5.12.49.4.1.1.13ColumngeUtilSampleSecondsread-writecurrentSample seconds of GE utilization alarm
1.3.6.1.4.1.890.1.5.12.49.4.2NodegeOps
1.3.6.1.4.1.890.1.5.12.49.4.2.1ScalargeTargetread-writecurrentTarget GE ifindex to clear packet statistics.
1.3.6.1.4.1.890.1.5.12.49.4.2.2ScalargeOperationread-writecurrentclearFxsCurrPerformance(2) - clear current performance on the target GE ifindex specified by geTarget. clearFxsCurr15MinPerformance(3) - clear current 15 minut…
1.3.6.1.4.1.890.1.5.12.49.4.3TablegeDdmiTablenot-accessiblecurrentDisplays current DDMI status on GE-NNI port.
1.3.6.1.4.1.890.1.5.12.49.4.3.1RowgeDdmiEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.4.3.1.1ColumngeDdmiTempread-onlycurrentInternally measured transceiver temperature in 10^(-4) Celsius.
1.3.6.1.4.1.890.1.5.12.49.4.3.1.2ColumngeDdmiVoltread-onlycurrentInternally measured transceiver supply voltage in 10^(-4) Volts.
1.3.6.1.4.1.890.1.5.12.49.4.3.1.3ColumngeDdmiTxCurrread-onlycurrentMeasured TX bias current in 10^(-4) mA.
1.3.6.1.4.1.890.1.5.12.49.4.3.1.4ColumngeDdmiTxPowerread-onlycurrentMeasured TX output power in 10^(-4) mW.
1.3.6.1.4.1.890.1.5.12.49.4.3.1.5ColumngeDdmiRxPowerread-onlycurrentMeasured RX received optical power in 10^(-4) mW.
1.3.6.1.4.1.890.1.5.12.49.4.4TablegeSfpInfoTablenot-accessiblecurrentDisplays current SFP information status on GE-NNI port.
1.3.6.1.4.1.890.1.5.12.49.4.4.1RowgeSfpInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.4.4.1.1ColumngeSfpInfoVendorread-onlycurrentSFP vendor name.
1.3.6.1.4.1.890.1.5.12.49.4.4.1.2ColumngeSfpInfoVendorPnread-onlycurrentSFP vendor PN(Part number).
1.3.6.1.4.1.890.1.5.12.49.4.4.1.3ColumngeSfpInfoVendorRevread-onlycurrentSFP vendor Rev(Revision level for part number).
1.3.6.1.4.1.890.1.5.12.49.4.4.1.4ColumngeSfpInfoVendorSnread-onlycurrentSFP vendor SN(Serial number).
1.3.6.1.4.1.890.1.5.12.49.4.4.1.5ColumngeSfpInfoDateCoderead-onlycurrentSFP vendor's manufacturing date code.
1.3.6.1.4.1.890.1.5.12.49.5Nodehwmonitor
1.3.6.1.4.1.890.1.5.12.49.5.1TablefanConfTablenot-accessiblecurrentConfigure the limit value of fan module, currently only control card has fan, an alarm will be raised if the sensing value higher or lower than these value.
1.3.6.1.4.1.890.1.5.12.49.5.1.1RowfanConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.5.1.1.1ColumnfanConfIndexread-onlycurrentFAN module index
1.3.6.1.4.1.890.1.5.12.49.5.1.1.2ColumnfanConfHighThresholdread-writecurrentFAN speed high threshold
1.3.6.1.4.1.890.1.5.12.49.5.1.1.3ColumnfanConfLowThresholdread-writecurrentFAN speed low threshold
1.3.6.1.4.1.890.1.5.12.49.5.2TabletemperatureConfTablenot-accessiblecurrentConfigure the limit value of temperature module, an alarm will be raised if the sensing value higher or lower than these value.
1.3.6.1.4.1.890.1.5.12.49.5.2.1RowtemperatureConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.5.2.1.1ColumntemperatureConfIndexread-onlycurrentTemperature sensor index
1.3.6.1.4.1.890.1.5.12.49.5.2.1.2ColumntemperatureConfHighThresholdread-writecurrentTemperature high threshold
1.3.6.1.4.1.890.1.5.12.49.5.2.1.3ColumntemperatureConfLowThresholdread-writecurrentTemperature low threshold
1.3.6.1.4.1.890.1.5.12.49.5.3TablevoltageConfTablenot-accessiblecurrentConfigure the limit value of voltage module, an alarm will be raised if the sensing value higher or lower than these value.
1.3.6.1.4.1.890.1.5.12.49.5.3.1RowvoltageConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.5.3.1.1ColumnvoltageConfIndexread-onlycurrentVoltage sendor index
1.3.6.1.4.1.890.1.5.12.49.5.3.1.2ColumnvoltageConfHighThresholdread-writecurrentVoltage high threshold
1.3.6.1.4.1.890.1.5.12.49.5.3.1.3ColumnvoltageConfLowThresholdread-writecurrentVoltage low threshold
1.3.6.1.4.1.890.1.5.12.49.5.4TablefanStatsTablenot-accessiblecurrentA table that contains rpm information about the fans.
1.3.6.1.4.1.890.1.5.12.49.5.4.1RowfanStatsEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.5.4.1.1ColumnfanRpmCurValueread-onlycurrentThe current rpm of the fan.
1.3.6.1.4.1.890.1.5.12.49.5.4.1.2ColumnfanRpmMaxValueread-onlycurrentThe maximum rpm ever performed by the fan.
1.3.6.1.4.1.890.1.5.12.49.5.4.1.3ColumnfanRpmMinValueread-onlycurrentThe minimum rpm ever performed by the fan.
1.3.6.1.4.1.890.1.5.12.49.5.4.1.4ColumnfanRpmAvgValueread-onlycurrentThe average rpm performed by the fan.
1.3.6.1.4.1.890.1.5.12.49.5.4.1.5ColumnfanRpmDescrread-onlycurrentThe description of the fan (e.g. location, function, etc.).
1.3.6.1.4.1.890.1.5.12.49.5.5TabletemperatureStatsTablenot-accessiblecurrentA table that contains temperature information.
1.3.6.1.4.1.890.1.5.12.49.5.5.1RowtemperatureStatsEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.5.5.1.1ColumntemperatureCurValueread-onlycurrentThe current temperature detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.5.1.2ColumntemperatureMaxValueread-onlycurrentThe maximum temperature ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.5.1.3ColumntemperatureMinValueread-onlycurrentThe minimum temperature ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.5.1.4ColumntemperatureAvgValueread-onlycurrentThe average temperature detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.5.1.5ColumntemperatureDescrread-onlycurrentThe description of the temperature sensor (e.g. location, function, etc.).
1.3.6.1.4.1.890.1.5.12.49.5.6TablevoltageStatsTablenot-accessiblecurrentA table that contains voltage information about the system.
1.3.6.1.4.1.890.1.5.12.49.5.6.1RowvoltageStatsEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.5.6.1.1ColumnvoltageCurValueread-onlycurrentThe current voltage detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.6.1.2ColumnvoltageMaxValueread-onlycurrentThe maximum voltage ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.6.1.3ColumnvoltageMinValueread-onlycurrentThe minimum voltage ever detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.6.1.4ColumnvoltageAvgValueread-onlycurrentThe average voltage detected by the sensor.
1.3.6.1.4.1.890.1.5.12.49.5.6.1.5ColumnvoltageNominalValueread-onlycurrentThe nominal voltage which the power should supply.
1.3.6.1.4.1.890.1.5.12.49.5.6.1.6ColumnvoltageDescrread-onlycurrentThe description of the voltage (e.g. location, nominal value, etc.).
1.3.6.1.4.1.890.1.5.12.49.5.7ScalarbatterySavingread-writecurrentEach bit corresponds to a method. BIT 1: input1 BIT 2: input2 BIT 3: input3 BIT 4: input4
1.3.6.1.4.1.890.1.5.12.49.5.8NodeexternalBattery
1.3.6.1.4.1.890.1.5.12.49.5.8.1NodeexternalBatteryStats
1.3.6.1.4.1.890.1.5.12.49.5.8.1.1ScalarexternalBatteryStatsTemperatureread-onlycurrentThe battery temperature detected by external device. Sensing range -19 to 105 degree. the unit is degree Celsius. If battery sensor absence or temperature out …
1.3.6.1.4.1.890.1.5.12.49.5.8.1.2ScalarexternalBatteryStatsVoltageread-onlycurrentThe battery voltage detected by external device. the unit is mV.
1.3.6.1.4.1.890.1.5.12.49.5.8.2NodeexternalBatteryConf
1.3.6.1.4.1.890.1.5.12.49.5.8.2.1ScalarexternalBatteryConfTempHighThresholdread-writecurrentBattery higher the threshold will issue alarm. the unit is degree Celsius.
1.3.6.1.4.1.890.1.5.12.49.5.8.2.2ScalarexternalBatteryConfTempLowThresholdread-writecurrentBattery lower the threshold will issue alarm. the unit is degree Celsius.
1.3.6.1.4.1.890.1.5.12.49.5.8.2.3ScalarexternalBatteryConfDcCriticThresholdread-onlycurrentIf battery voltage is equal to or lower than this threshold, issue dc critic alarm. If battery voltage is higher than this threshold, clear dc critic alarm. th…
1.3.6.1.4.1.890.1.5.12.49.5.8.2.4ScalarexternalBatteryConfDcLowThresholdread-onlycurrentIf battery voltage is equal to or lower than this threshold, issue dc low alarm. If battery voltage is higher than this threshold, clear dc low alarm. the unit…
1.3.6.1.4.1.890.1.5.12.49.5.8.2.5ScalarexternalBatteryConfDcErrThresholdread-onlycurrentIf battery voltage is lower than this threshold, issue dc error alarm. If battery voltage is equal to or higher than this threshold, clear dc error alarm. the …
1.3.6.1.4.1.890.1.5.12.49.6Nodeigmpmld
1.3.6.1.4.1.890.1.5.12.49.6.1ScalarigmpmldModeread-writecurrentIGMP or MLD packet handling mode. disable(0) - disable IGMP or MLD function transparent(1) - packets are transparent snooping(2) - packets are handled IGMP or …
1.3.6.1.4.1.890.1.5.12.49.6.2ScalarigmpmldVersionread-writecurrentConfigures IGMP/MLD protocol version.
1.3.6.1.4.1.890.1.5.12.49.6.3ScalarigmpmldLeaveModeread-writecurrentConfigures IGMP/MLD leave message handling mode
1.3.6.1.4.1.890.1.5.12.49.6.4ScalarigmpmldLastMemberQueryIntervalread-writecurrentConfigures last member query interval 100~1000 in ms, in step of 100
1.3.6.1.4.1.890.1.5.12.49.6.5ScalarigmpmldLastMemberQueryRobustnessread-writecurrentConfigures last member query robusteness.
1.3.6.1.4.1.890.1.5.12.49.6.6ScalarigmpmldGeneralQueryIntervalread-writecurrentConfigures genery query query interval.
1.3.6.1.4.1.890.1.5.12.49.6.7ScalarigmpmldGeneralQueryRobustnessread-writecurrentConfigures genery query robustness.
1.3.6.1.4.1.890.1.5.12.49.6.8ScalarigmpmldGeneralQueryMaxRespTimeread-writecurrentConfigures genery query maximum response time.
1.3.6.1.4.1.890.1.5.12.49.6.9TableigmpmldConfPortTablenot-accessiblecurrentigmp/mld Conf Port Table.
1.3.6.1.4.1.890.1.5.12.49.6.9.1RowigmpmldConfPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.6.9.1.1ColumnigmpmldConfPortMaxGroupCountread-writecurrentConfigures maximum group counts on the specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.6.9.1.2ColumnigmpmldConfPortPrivilegeEnableread-writecurrentEnables group privilege checking on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.6.9.1.3ColumnigmpmldConfPortCacEnableread-writecurrentEnable/Disable CAC bandwidth control.
1.3.6.1.4.1.890.1.5.12.49.6.9.1.4ColumnigmpmldConfPortCacMaxBandwidthread-writecurrentConfigures maximum CAC bandwidth on the specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.6.10NodegroupPrivilege
1.3.6.1.4.1.890.1.5.12.49.6.10.1ScalarigmpmldMaxNumOfGroupPrivilegeProfilesread-onlycurrentThe maximum number of group privilege profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.6.10.2TableigmpmldGroupPrivilegeProfileTablenot-accessiblecurrentMulticast group privilege profile table
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1RowigmpmldGroupPrivilegeProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.1ColumnigmpmldGroupPrivilegeProfileNameread-onlycurrentProfile name
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.2ColumnigmpmldGroupPrivilegeProfileIndexread-onlycurrentConfigures a privilege entry of specified group privilege profile.
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.3ColumnigmpmldGroupPrivilegeProfileAddressTyperead-createcurrentThe type of address format used for the igmpmldGroupPrivilegeProfileStartIp object and igmpmldGroupPrivilegeProfileEndIp object.
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.4ColumnigmpmldGroupPrivilegeProfileStartIpread-createcurrentipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.5ColumnigmpmldGroupPrivilegeProfileEndIpread-createcurrentipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.6ColumnigmpmldGroupPrivilegeProfilePrivilegeread-createcurrentforbid: deny groups delivery permit: allows groups delivery. preview: allows groups preview.
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.7ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewLengthread-createcurrentlength timer of preview privilege
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.8ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewIntervalread-createcurrentinterval timer of preview privilege
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.9ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewCountread-createcurrentpreview count
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.10ColumnigmpmldGroupPrivilegeProfilePrivilegePreviewResetread-createcurrentreset timer of preview privilege
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.11ColumnigmpmldGroupPrivilegeProfileCacBandwidthread-createcurrentMulticast channel bandwidth for channel specified
1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.12ColumnigmpmldGroupPrivilegeProfileRowStatusread-createcurrentRow status of the table entry. To destroy the whole profile directly, use igmpmldGroupPrivilegeProfileIndex 0 to indicate this case.
1.3.6.1.4.1.890.1.5.12.49.6.10.3TableigmpmldGroupPrivilegePortTablenot-accessiblecurrentConfigures group privilege profile to UNI ports
1.3.6.1.4.1.890.1.5.12.49.6.10.3.1RowigmpmldGroupPrivilegePortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.6.10.3.1.1ColumnigmpmldGroupPrivilegePortEntryRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.6.11Nodemvlan
1.3.6.1.4.1.890.1.5.12.49.6.11.1ScalarigmpmldMaxNumOfMvlanread-onlycurrentThe maximum number of MVLAN supported by the system.
1.3.6.1.4.1.890.1.5.12.49.6.11.2TableigmpmldMvlanTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.6.11.2.1RowigmpmldMvlanEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.6.11.2.1.1ColumnigmpmldMvlanIdread-onlycurrentSpecified MVLAN ID.
1.3.6.1.4.1.890.1.5.12.49.6.11.2.1.2ColumnigmpmldMvlanRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.6.11.2.1.3ColumnigmpmldMvlanTr101fwread-createcurrentConfigures if enables this mvlan to transparent forward in TR-101 mode. Ignores this configuration in CTC mode. disable: MVLAN vid of IGMP/MLD report will be c…
1.3.6.1.4.1.890.1.5.12.49.6.11.3TableigmpmldMvlanPortTablenot-accessiblecurrentJoins specified UNI ports to MVLAN.
1.3.6.1.4.1.890.1.5.12.49.6.11.3.1RowigmpmldMvlanPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.6.11.3.1.1ColumnigmpmldMvlanPortEgressTyperead-createcurrentSpecifies the egress tagging type for the specified MVLAN packets. untag(1): egress untagged tag(2): egress tagged with the same VLAN as MVLAN ID replaceByUniV…
1.3.6.1.4.1.890.1.5.12.49.6.11.3.1.2ColumnigmpmldMvlanPortUniVlanread-createcurrentSpecifies the egress VLAN ID if igmpmldMvlanPortEgressType is configured as replaceByUniVlan(3), but the value is not concerned in other cases
1.3.6.1.4.1.890.1.5.12.49.6.11.3.1.3ColumnigmpmldMvlanPortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.6.11.4TableigmpmldMvlanMapTablenot-accessiblecurrentConfigures N:1 VLAN mapping by group address for TR-101 mode only. The MVLAN table is not editable when tr101-fw is specified for the MVLAN.
1.3.6.1.4.1.890.1.5.12.49.6.11.4.1RowigmpmldMvlanMapEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.1ColumnigmpmldMvlanMapIndexread-onlycurrentConfigures a mapping entry of mvlan map table.
1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.2ColumnigmpmldMvlanMapStartIpread-createcurrentipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.3ColumnigmpmldMvlanMapEndIpread-createcurrentipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.4ColumnigmpmldMvlanMapRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.6.12Nodegroup
1.3.6.1.4.1.890.1.5.12.49.6.12.3TableigmpmldMvlanGroupTablenot-accessiblecurrentThis table includes igmpmld group by mvlan information, for TR-101 mode only.
1.3.6.1.4.1.890.1.5.12.49.6.12.3.1RowigmpmldMvlanGroupEntrynot-accessiblecurrentAn entry in igmpmldMvlanGroupTable.
1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.1ColumnigmpmldMvlanGroupIdread-onlycurrentSpecified MVLAN ID.
1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.2ColumnigmpmldMvlanGroupAddressTyperead-onlycurrentThe type of address format used for the igmpmldGroupAddress object.
1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.3ColumnigmpmldMvlanGroupAddressread-onlycurrentigmpmld group address
1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.4ColumnigmpmldMvlanGroupNumberOfMembersread-onlycurrentnumber Of group members
1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.5ColumnigmpmldMvlanGroupNumberOfNewJoinedMembersread-onlycurrentnumber Of new joined members
1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.6ColumnigmpmldMvlanGroupNumberOfLeftMembersread-onlycurrentnumber Of left members
1.3.6.1.4.1.890.1.5.12.49.6.12.4TableigmpmldMvlanGroupPortTablenot-accessiblecurrentThis table includes igmpmld Group port by mvlan information, for TR-101 mode only.
1.3.6.1.4.1.890.1.5.12.49.6.12.4.1RowigmpmldMvlanGroupPortEntrynot-accessiblecurrentAn entry in igmpmldGroupPortTable.
1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.1ColumnigmpmldMvlanGroupCreateTimeread-onlycurrentcreateTime of igmpmld group
1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.2ColumnigmpmldMvlanGroupPortBandwidthread-onlycurrentbandwidth of igmpmld group
1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.3ColumnigmpmldMvlanGroupPortPrivilegeread-onlycurrentprivilege of igmpmld group
1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.4ColumnigmpmldMvlanGroupPortStateread-onlycurrentstate of igmpmld group
1.3.6.1.4.1.890.1.5.12.49.6.13NodeigmpmldStatistics
1.3.6.1.4.1.890.1.5.12.49.6.13.1ScalarigmpmldStatisticsRxQueryread-onlycurrentThe total number of IGMP query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.2ScalarigmpmldStatisticstTxQueryread-onlycurrentThe total number of IGMP query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.3ScalarigmpmldStatisticsRxReportread-onlycurrentThe total number of IGMP report messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.4ScalarigmpmldStatisticsTxReportread-onlycurrentThe total number of IGMP report messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5TableigmpmldStatisticsPortTablenot-accessiblecurrentThis table includes IGMP/MLD port statistics information
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1RowigmpmldStatisticsPortEntrynot-accessiblecurrentAn entry in igmpmldStatisticsPortTable
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.1ColumnigmpmldStatisticsPortChannelCreateSuccessread-onlycurrentThe total number of channel group created successfully
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.2ColumnigmpmldStatisticsPortChannelCreateFailread-onlycurrentThe total number of channel group created fail
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.3ColumnigmpmldStatisticsPortChannelRemoveLeaveread-onlycurrentThe total number of channel group removed due to user leave
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.4ColumnigmpmldStatisticsPortChannelRemoveTimeoutread-onlycurrentThe total number of channel group removed due to time out
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.5ColumnigmpmldStatisticsPortQueryRxread-onlycurrentThe total number of IGMP query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.6ColumnigmpmldStatisticsPortQueryTxread-onlycurrentThe total number of IGMP query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.7ColumnigmpmldStatisticsPortGeneralQueryIgmpv2Txread-onlycurrentThe total number of IGMPv2 general query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.8ColumnigmpmldStatisticsPortGeneralQueryIgmpv3Txread-onlycurrentThe total number of IGMPv3 general query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.9ColumnigmpmldStatisticsPortGeneralQueryMldv1Txread-onlycurrentThe total number of MLDv1 general query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.10ColumnigmpmldStatisticsPortGeneralQueryMldv2Txread-onlycurrentThe total number of MLDv2 general query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.11ColumnigmpmldStatisticsPortSpecificQueryIgmpv2Txread-onlycurrentThe total number of IGMPv2 specific query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.12ColumnigmpmldStatisticsPortSpecificQueryIgmpv3Txread-onlycurrentThe total number of IGMPv3 specific query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.14ColumnigmpmldStatisticsPortSpecificQueryMldv1Txread-onlycurrentThe total number of MLDv1 specific query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.15ColumnigmpmldStatisticsPortSpecificQueryMldv2Txread-onlycurrentThe total number of MLDv2 specific query messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.16ColumnigmpmldStatisticsPortReportRxread-onlycurrentThe total number of IGMP/MLD report messages received
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.17ColumnigmpmldStatisticsPortReportTxread-onlycurrentThe total number of IGMP/MLD report messages transmitted
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.18ColumnigmpmldStatisticsPortReportJoinIgmpv2Rxread-onlycurrentThe total number of IGMPv2 join type report messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.19ColumnigmpmldStatisticsPortReportLeaveIgmpv2Rxread-onlycurrentThe total number of IGMPv2 leave type report messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.20ColumnigmpmldStatisticsPortReportDropIgmpread-onlycurrentThe total number of IGMP dropped report messages
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.21ColumnigmpmldStatisticsPortCompatibleModeread-onlycurrentThe old version compatible mode of specific port. The uplink ports (enet1 & enet2) share the same mode.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.22ColumnigmpmldStatisticsPortReportJoinMldv1Rxread-onlycurrentThe total number of MLDv1 join type report messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.23ColumnigmpmldStatisticsPortReportLeaveMldv1Rxread-onlycurrentThe total number of MLDv1 leave type report messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.24ColumnigmpmldStatisticsPortReportDropMldread-onlycurrentThe total number of MLD dropped report messages
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.25ColumnigmpmldStatisticsPortReportIgmpv3Rxread-onlycurrentThe total number of IGMPv3 report messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.26ColumnigmpmldStatisticsPortReportMldv2Rxread-onlycurrentThe total number of MLDv2 report messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.27ColumnigmpmldStatisticsPortQueryDropIgmpread-onlycurrentThe total number of IGMP dropped query messages
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.28ColumnigmpmldStatisticsPortQueryDropMldread-onlycurrentThe total number of MLD dropped query messages
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.29ColumnigmpmldStatisticsPortGeneralQueryIgmpv2Rxread-onlycurrentThe total number of IGMPv2 general query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.30ColumnigmpmldStatisticsPortGeneralQueryIgmpv3Rxread-onlycurrentThe total number of IGMPv3 general query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.31ColumnigmpmldStatisticsPortGeneralQueryMldv1Rxread-onlycurrentThe total number of MLDv1 general query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.32ColumnigmpmldStatisticsPortGeneralQueryMldv2Rxread-onlycurrentThe total number of MLDv2 general query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.33ColumnigmpmldStatisticsPortSpecificQueryIgmpv2Rxread-onlycurrentThe total number of IGMPv2 specific query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.34ColumnigmpmldStatisticsPortSpecificQueryIgmpv3Rxread-onlycurrentThe total number of IGMPv3 specific query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.35ColumnigmpmldStatisticsPortSpecificQueryMldv1Rxread-onlycurrentThe total number of MLDv1 specific query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.36ColumnigmpmldStatisticsPortSpecificQueryMldv2Rxread-onlycurrentThe total number of MLDv2 specific query messages received.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.37ColumnigmpmldStatisticsPortReportJoinIgmpv2Txread-onlycurrentThe total number of IGMPv2 join type report messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.38ColumnigmpmldStatisticsPortReportLeaveIgmpv2Txread-onlycurrentThe total number of IGMPv2 leave type report messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.39ColumnigmpmldStatisticsPortReportJoinMldv1Txread-onlycurrentThe total number of MLDv1 join type report messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.40ColumnigmpmldStatisticsPortReportLeaveMldv1Txread-onlycurrentThe total number of MLDv1 leave type report messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.41ColumnigmpmldStatisticsPortReportIgmpv3Txread-onlycurrentThe total number of IGMPv3 report messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.42ColumnigmpmldStatisticsPortReportMldv2Txread-onlycurrentThe total number of MLDv2 report messages transmitted.
1.3.6.1.4.1.890.1.5.12.49.6.14NodeigmpmldLogs
1.3.6.1.4.1.890.1.5.12.49.6.14.1TableigmpmldLogsPortTablenot-accessiblecurrentThis table includes IGMP/MLD port statistics information
1.3.6.1.4.1.890.1.5.12.49.6.14.1.1RowigmpmldLogsPortEntrynot-accessiblecurrentAn entry in igmpmldStatisticsPortTable
1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.1ColumnigmpmldLogsPortTimeread-onlycurrentThe time of a log entry
1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.2ColumnigmpmldLogsPortSerialNoread-onlycurrentThe serial number is used to identify the order of logs in the same seconds
1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.3ColumnigmpmldLogsPortEventread-onlycurrentThe event type of a log entry: join(0) - event of user join a multicast group leave(1) - event of user leave a multicast group drop(2) - event of system drop a…
1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.4ColumnigmpmldLogsPortGroupAddressTyperead-onlycurrentThe type of address format used for the igmpmldLogsPortGroupAddress
1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.5ColumnigmpmldLogsPortGroupAddressread-onlycurrentThe group address of a log entry
1.3.6.1.4.1.890.1.5.12.49.6.15NodeigmpmldOps
1.3.6.1.4.1.890.1.5.12.49.6.15.1ScalarigmpmldTargetread-writecurrentSpecifies the target NNI or UNI ifindex for igmpmldmldOperation
1.3.6.1.4.1.890.1.5.12.49.6.15.2ScalarigmpmldOperationread-writecurrentClear packet statistics clearIGMPMLDPacketStatistics(1) - clear system-wized packet counters clearIGMPMLDPacketStatisticsOnSpecifiedUNIports(2) - clear packet …
1.3.6.1.4.1.890.1.5.12.49.6.16ScalarigmpmldPbitread-writecurrentConfigures IGMP/MLD packet priority bit in proxy mode.
1.3.6.1.4.1.890.1.5.12.49.6.17NodeigmpmldTest
1.3.6.1.4.1.890.1.5.12.49.7Nodeip
1.3.6.1.4.1.890.1.5.12.49.7.1NodeipArp
1.3.6.1.4.1.890.1.5.12.49.7.1.1ScalaripArpOpsread-writecurrentFlush ARP table.
1.3.6.1.4.1.890.1.5.12.49.7.1.2TableipArpTablenot-accessiblecurrentDisplay the arp table.
1.3.6.1.4.1.890.1.5.12.49.7.1.2.1RowipArpEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.1.2.1.1ColumnipAddressread-onlycurrentThe IP that is learned in ARP table.
1.3.6.1.4.1.890.1.5.12.49.7.1.2.1.2ColumnmacAddressread-onlycurrentThe correspond mac address of the ipAddress.
1.3.6.1.4.1.890.1.5.12.49.7.1.2.1.3ColumnipInterfaceread-onlycurrentThe interface that the ipAddress is learned.
1.3.6.1.4.1.890.1.5.12.49.7.2NodeipInband
1.3.6.1.4.1.890.1.5.12.49.7.2.1ScalaripInbandAddressread-writecurrentSets the in-band management interface IP address (1.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.7.2.2ScalaripInbandNetmaskread-writecurrentSets the in-band management interface subnet mask.
1.3.6.1.4.1.890.1.5.12.49.7.2.3ScalaripInbandMgmtVlanread-writecurrentSets in-band mangement VLAN (1~4093).
1.3.6.1.4.1.890.1.5.12.49.7.2.4ScalaripInbandGatewayread-writecurrentSets the in-band default gateway's IP address (1.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.7.2.5Scalaripv6InbandAddressread-writecurrentConfigures in-band management interface with global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::).
1.3.6.1.4.1.890.1.5.12.49.7.2.6Scalaripv6InbandNetmaskread-writecurrentConfigures in-band management interface IPv6 global address subnet mask.
1.3.6.1.4.1.890.1.5.12.49.7.2.7Scalaripv6InbandGatewayread-writecurrentConfigures global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::) for the inband IPv6 default outgoing gate…
1.3.6.1.4.1.890.1.5.12.49.7.2.8ScalaripInbandDhcpBootpEnableread-writecurrentEnable DHCP client to MGMT inband interface. disable(2) is only for status display.
1.3.6.1.4.1.890.1.5.12.49.7.2.9ScalaripInbandDhcpOperationread-writecurrentPerforms DHCP operations on MGMT inband interface. release: release dynamic IP address renew: renew dynamic IP address Value changes to be zero after setting s…
1.3.6.1.4.1.890.1.5.12.49.7.2.10ScalaripInbandMgmtPbitread-writecurrentSets in-band mangement pbit.
1.3.6.1.4.1.890.1.5.12.49.7.2.11Scalaripv6InbandLinkLocalAddressread-onlycurrentIn-of-band IPv6 Link-local Address
1.3.6.1.4.1.890.1.5.12.49.7.3NodeipOutband
1.3.6.1.4.1.890.1.5.12.49.7.3.1ScalaripOutbandAddressread-writecurrentSets the out-of-band management interface IP address (1.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.7.3.2ScalaripOutbandNetmaskread-writecurrentSets the out-of-band management interface subnet mask.
1.3.6.1.4.1.890.1.5.12.49.7.3.3Scalaripv6OutbandAddressread-writecurrentConfigures out-of-band management interface with IPv6 global address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::).
1.3.6.1.4.1.890.1.5.12.49.7.3.4Scalaripv6OutbandNetmaskread-writecurrentConfigures out-of-band management interface IPv6 global address subnet mask.
1.3.6.1.4.1.890.1.5.12.49.7.3.5Scalaripv6OutbandLinkLocalAddressread-onlycurrentOut-of-band IPv6 Link-local Address
1.3.6.1.4.1.890.1.5.12.49.7.4Scalaripv6DefaultMgmtread-writecurrentSets which traffic flow (in-band or out-of-band) the Switch sends packet originating from itself (such as SNMP traps) or packets with unknown source.
1.3.6.1.4.1.890.1.5.12.49.7.5NodeipRoute
1.3.6.1.4.1.890.1.5.12.49.7.5.1ScalaripMaxNumOfStaticRoutesread-onlycurrentThe maximum number of static routes supported by the system.
1.3.6.1.4.1.890.1.5.12.49.7.5.2TableipStaticRouteTablenot-accessiblecurrentConfigures a static route.
1.3.6.1.4.1.890.1.5.12.49.7.5.2.1RowipStaticRouteEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.1ColumnipStaticRouteDestread-onlycurrentDestination subnet address 0.0.0.0 ~ 223.255.255.255
1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.2ColumnipStaticRouteMaskread-onlycurrentDestination subnet mask
1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.3ColumnipStaticRouteNextHopread-createcurrentNext hop address 0.0.0.0 ~ 223.255.255.255
1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.4ColumnipStaticRouteRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.5ColumnipStaticRouteIfNameread-onlycurrentDestination interface name
1.3.6.1.4.1.890.1.5.12.49.7.5.3TableipRouteTablenot-accessiblecurrentDisplay routing table.
1.3.6.1.4.1.890.1.5.12.49.7.5.3.1RowipRouteEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.1ColumnipRouteDestread-onlycurrentDestination subnet address 0.0.0.0 ~ 223.255.255.255
1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.2ColumnipRouteMaskread-onlycurrentDestination subnet mask
1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.3ColumnipRouteNextHopread-onlycurrentNext hop address 0.0.0.0 ~ 223.255.255.255
1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.4ColumnipRouteIfNameread-onlycurrentDestination interface name
1.3.6.1.4.1.890.1.5.12.49.7.5.4Tableipv6DefaultRouterInbandTablenot-accessiblecurrentShow IPv6 inband default-router.
1.3.6.1.4.1.890.1.5.12.49.7.5.4.1Rowipv6DefaultRouterInbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.1Columnipv6DefaultRouterInbandAddressread-onlycurrentShow IPv6 default-router inband Address.
1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.2Columnipv6DefaultRouterInbandPreferenceread-onlycurrentShow IPv6 default-router inband Preference
1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.3Columnipv6DefaultRouterInbandLifetimeread-onlycurrentShow IPv6 default-router inband lifetime (Unit: sec)
1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.4Columnipv6DefaultRouterInbandExpireread-onlycurrentShow IPv6 default-router inband expire
1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.5Columnipv6DefaultRouterInbandFlagread-onlycurrentShow IPv6 default-router inband flag
1.3.6.1.4.1.890.1.5.12.49.7.5.5Tableipv6DefaultRouterOutbandTablenot-accessiblecurrentShow IPv6 outband default-router.
1.3.6.1.4.1.890.1.5.12.49.7.5.5.1Rowipv6DefaultRouterOutbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.1Columnipv6DefaultRouterOutbandAddressread-onlycurrentShow IPv6 default-router outband Address.
1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.2Columnipv6DefaultRouterOutbandPreferenceread-onlycurrentShow IPv6 default-router outband Preference
1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.3Columnipv6DefaultRouterOutbandLifetimeread-onlycurrentShow IPv6 default-router outband lifetime. (Unit: sec)
1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.4Columnipv6DefaultRouterOutbandExpireread-onlycurrentShow IPv6 default-router outband expire
1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.5Columnipv6DefaultRouterOutbandFlagread-onlycurrentShow IPv6 default-router outband flag
1.3.6.1.4.1.890.1.5.12.49.7.5.6Tableipv6RouteInbandTablenot-accessiblecurrentShow IPv6 inband route
1.3.6.1.4.1.890.1.5.12.49.7.5.6.1Rowipv6RouteInbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.5.6.1.1Columnipv6RouteInbandAddressread-onlycurrentShow IPv6 inband route Address.
1.3.6.1.4.1.890.1.5.12.49.7.5.6.1.2Columnipv6RouteInbandMaskread-onlycurrentShow IPv6 inband route address mask.
1.3.6.1.4.1.890.1.5.12.49.7.5.6.1.3Columnipv6RouteInbandNameread-onlycurrentShow IPv6 inband route Gateway/Interface Name
1.3.6.1.4.1.890.1.5.12.49.7.5.7Tableipv6RouteOutbandTablenot-accessiblecurrentShow IPv6 outband route
1.3.6.1.4.1.890.1.5.12.49.7.5.7.1Rowipv6RouteOutbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.5.7.1.1Columnipv6RouteOutbandAddressread-onlycurrentShow IPv6 outband route Address.
1.3.6.1.4.1.890.1.5.12.49.7.5.7.1.2Columnipv6RouteOutbandMaskread-onlycurrentShow IPv6 inband route address mask.
1.3.6.1.4.1.890.1.5.12.49.7.5.7.1.3Columnipv6RouteOutbandNameread-onlycurrentShow IPv6 Outband route Gateway/Interface Name
1.3.6.1.4.1.890.1.5.12.49.7.6NodeipStatistic
1.3.6.1.4.1.890.1.5.12.49.7.6.1ScalaripInOctetCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.2ScalaripInUnicastCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.3ScalaripInMulticastCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.4ScalaripInDiscardCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.5ScalaripInErrorCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.6ScalaripInUnknowProtocolCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.7ScalaripOutOctetCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.8ScalaripOutUnicastCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.9ScalaripOutMulticastCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.10ScalaripOutDiscardCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.6.11ScalaripOutErrorCountread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.7.7Nodeipv6Destination
1.3.6.1.4.1.890.1.5.12.49.7.7.1Tableipv6DestInbandTablenot-accessiblecurrentShow IPv6 inband destination
1.3.6.1.4.1.890.1.5.12.49.7.7.1.1Rowipv6DestInbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.7.1.1.1Columnipv6DestInbandDestAddressread-onlycurrentShow IPv6 inband destination Address.
1.3.6.1.4.1.890.1.5.12.49.7.7.1.1.2Columnipv6DestInbandNextHopAddressread-onlycurrentShow IPv6 inband destination next hop address.
1.3.6.1.4.1.890.1.5.12.49.7.7.2Tableipv6DestOutbandTablenot-accessiblecurrentShow IPv6 outband destination
1.3.6.1.4.1.890.1.5.12.49.7.7.2.1Rowipv6DestOutbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.7.2.1.1Columnipv6DestOutbandDestAddressread-onlycurrentShow IPv6 outband destination Address.
1.3.6.1.4.1.890.1.5.12.49.7.7.2.1.2Columnipv6DestOutbandNextHopAddressread-onlycurrentShow IPv6 outband destination next hop address.
1.3.6.1.4.1.890.1.5.12.49.7.8Nodeipv6Neighbor
1.3.6.1.4.1.890.1.5.12.49.7.8.1Tableipv6NeighborInbandTablenot-accessiblecurrentShow IPv6 inband neighbor
1.3.6.1.4.1.890.1.5.12.49.7.8.1.1Rowipv6NeighborInbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.1Columnipv6NeighborInbandNeighborread-onlycurrentShow IPv6 inband neighbor address.
1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.2Columnipv6NeighborInbandLinklayerAddressread-onlycurrentShow IPv6 inband neighbor linklayer address. 00:00:00:00:00:00 means incomplete
1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.3Columnipv6NeighborInbandExpireread-onlycurrentShow IPv6 inband neighbor expire.
1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.4Columnipv6NeighborInbandFlagsread-onlycurrentShow IPv6 inband neighbor flag.
1.3.6.1.4.1.890.1.5.12.49.7.8.2Tableipv6NeighborOutbandTablenot-accessiblecurrentShow IPv6 outband neighbor
1.3.6.1.4.1.890.1.5.12.49.7.8.2.1Rowipv6NeighborOutbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.1Columnipv6NeighborOutbandNeighborread-onlycurrentShow IPv6 outband neighbor address.
1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.2Columnipv6NeighborOutbandLinklayerAddressread-onlycurrentShow IPv6 outband neighbor linklayer address. 00:00:00:00:00:00 means incomplete
1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.3Columnipv6NeighborOutbandExpireread-onlycurrentShow IPv6 outband neighbor expire.
1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.4Columnipv6NeighborOutbandFlagsread-onlycurrentShow IPv6 outband neighbor flag.
1.3.6.1.4.1.890.1.5.12.49.7.9Nodeipv6Prefix
1.3.6.1.4.1.890.1.5.12.49.7.9.1Tableipv6PrefixInbandTablenot-accessiblecurrentShow IPv6 inband prefix
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1Rowipv6PrefixInbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.1Columnipv6PrefixInbandPrefixread-onlycurrentShow IPv6 inband prefix address.
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.2Columnipv6PrefixInbandPrefixLengthread-onlycurrentShow IPv6 inband prefix length.
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.3Columnipv6PrefixInbandVLtimeread-onlycurrentShow IPv6 inband prefix vltime.
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.4Columnipv6PrefixInbandPLtimeread-onlycurrentShow IPv6 inband prefix pltime.
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.5Columnipv6PrefixInbandExpireread-onlycurrentShow IPv6 inband prefix expire.
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.6Columnipv6PrefixInbandOnlinkread-onlycurrentShow IPv6 inband prefix onlink.
1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.7Columnipv6PrefixInbandAutonomousread-onlycurrentShow IPv6 inband prefix autonomous.
1.3.6.1.4.1.890.1.5.12.49.7.9.2Tableipv6PrefixOutbandTablenot-accessiblecurrentShow IPv6 outband prefix
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1Rowipv6PrefixOutbandEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.1Columnipv6PrefixOutbandPrefixread-onlycurrentShow IPv6 outband prefix address.
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.2Columnipv6PrefixOutbandPrefixLengthread-onlycurrentShow IPv6 outband prefix length.
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.3Columnipv6PrefixOutbandVLtimeread-onlycurrentShow IPv6 outband prefix vltime.
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.4Columnipv6PrefixOutbandPLtimeread-onlycurrentShow IPv6 outband prefix pltime.
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.5Columnipv6PrefixOutbandExpireread-onlycurrentShow IPv6 outband prefix expire.
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.6Columnipv6PrefixOutbandOnlinkread-onlycurrentShow IPv6 outband prefix expire.
1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.7Columnipv6PrefixOutbandAutonomousread-onlycurrentShow IPv6 outband prefix autonomous.
1.3.6.1.4.1.890.1.5.12.49.8Nodelcm
1.3.6.1.4.1.890.1.5.12.49.8.1TableslotModuleTablenot-accessiblecurrentThe table which contains the slot information in a chassis.
1.3.6.1.4.1.890.1.5.12.49.8.1.1RowslotModuleEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.8.1.1.1ColumnslotModuleIdVes1724-58vread-onlycurrentIdentity of the slot. 2 ~ 5: slot 2 ~ slot 5 1: control card
1.3.6.1.4.1.890.1.5.12.49.8.1.1.2ColumnslotModuleRealTyperead-onlycurrentCard type of the plug-in card.
1.3.6.1.4.1.890.1.5.12.49.8.1.1.4ColumnslotModuleDescrread-onlycurrentThe descriptions of the plug-in card.
1.3.6.1.4.1.890.1.5.12.49.8.1.1.5ColumnslotModuleStatusread-onlycurrentThe module state of the plug-in card.
1.3.6.1.4.1.890.1.5.12.49.8.1.1.6ColumnslotModuleAlarmStatusread-onlycurrentThis variable indicates the alarm status of the module and would be aligned with MSC/line-card alarm LED. hasAlarm(1) there is at least one critical current al…
1.3.6.1.4.1.890.1.5.12.49.8.1.1.7ColumnslotModuleHWVersionread-onlycurrentThe hardware version of the plug-in card
1.3.6.1.4.1.890.1.5.12.49.8.1.1.8ColumnslotModuleSerialNumberread-onlycurrentThe serial number of the plug-in card
1.3.6.1.4.1.890.1.5.12.49.8.1.1.9ColumnslotModuleCleiCoderead-onlycurrentThe CLEI code of the plug-in card
1.3.6.1.4.1.890.1.5.12.49.8.1.1.10ColumnslotModuleUpTimeread-onlycurrentThe time (in seconds) since the plug-in card was last re-initialized.
1.3.6.1.4.1.890.1.5.12.49.9Nodelogin
1.3.6.1.4.1.890.1.5.12.49.9.1ScalarloginMaxNumOfUsersread-onlycurrentThe maximum number of login user accounts supported by the system.
1.3.6.1.4.1.890.1.5.12.49.9.2TableloginUserTablenot-accessiblecurrentLogin account configuration table.
1.3.6.1.4.1.890.1.5.12.49.9.2.1RowloginUserEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.9.2.1.1ColumnloginUserNameread-onlycurrentName of user account.
1.3.6.1.4.1.890.1.5.12.49.9.2.1.2ColumnloginUserPasswordread-createcurrentPassword of user account. Can input with plain text or ciphertext. plain text: Up to 31 printable characters. ciphertext: 95 characters with special format and…
1.3.6.1.4.1.890.1.5.12.49.9.2.1.3ColumnloginUserPrivilegeread-createcurrentAssigns a privilege level to the specified account. The privilege level is applied the next time the user logs in.
1.3.6.1.4.1.890.1.5.12.49.9.2.1.4ColumnloginUserRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.12.49.10Nodeloopguard
1.3.6.1.4.1.890.1.5.12.49.10.1TableloopguardConfPortTablenot-accessiblecurrentLoop guard configuration table
1.3.6.1.4.1.890.1.5.12.49.10.1.1RowloopguardConfPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.10.1.1.1ColumnloopguardConfPortEnableread-writecurrentEnable/Disable loop guard function for specific port.
1.3.6.1.4.1.890.1.5.12.49.10.1.1.2ColumnloopguardConfPortPolicyread-writecurrentConfigures the policy when loop condition is detected. fix : shutdown the port, user needs to enable the port manually dynamic : shutdown the port, and recover…
1.3.6.1.4.1.890.1.5.12.49.10.1.1.3ColumnloopguardConfPortRecoverTimeread-writecurrentConfigures the recover time for dynamic policy.
1.3.6.1.4.1.890.1.5.12.49.10.1.1.4ColumnloopguardConfPortUniVlanread-writecurrent1~4093 : Configures the UNI VLAN that the loopguard detection packets carried. 0 : Sets loopguard detection packets carry no VLAN tag. If set loopguardConfPort…
1.3.6.1.4.1.890.1.5.12.49.10.1.1.5ColumnloopguardConfPortPbitread-writecurrentConfigures pbit that the loopguard detection packets carried. If set loopguardConfPortUniVlan with 0 only, the loopguardConfPortPbit will be automatically set …
1.3.6.1.4.1.890.1.5.12.49.10.2ScalarloopguardStatsSysStatusread-onlycurrentDisplays if there is any DSL port on the device loopguard enabled.
1.3.6.1.4.1.890.1.5.12.49.10.3TableloopguardStatsPortTablenot-accessiblecurrentLoop guard UNI port statistics table
1.3.6.1.4.1.890.1.5.12.49.10.3.1RowloopguardStatsPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.10.3.1.1ColumnloopguardStatsPortLinkedStateread-onlycurrentDisplays linked state on specific UNI port.
1.3.6.1.4.1.890.1.5.12.49.10.3.1.2ColumnloopguardStatsPortTxPktsread-onlycurrentDisplays counter of transmited loopguard probe packet on specific UNI port.
1.3.6.1.4.1.890.1.5.12.49.10.3.1.3ColumnloopguardStatsPortRxPktsread-onlycurrentDisplays counter of received loopguard probe packet on specific UNI port.
1.3.6.1.4.1.890.1.5.12.49.10.3.1.4ColumnloopguardStatsPortBadPktsread-onlycurrentDisplays counter of received bad loopguard probe packet on specific UNI port. The bad loopguard probe packet will not trigger loopguard block port mechanism. l…
1.3.6.1.4.1.890.1.5.12.49.10.3.1.5ColumnloopguardStatsPortShutdownTimeread-onlycurrentDisplays port shutdown time for loopguard detection on specific UNI port.
1.3.6.1.4.1.890.1.5.12.49.10.3.1.6ColumnloopguardStatsPortOperationread-writecurrent1 : Clears loopguard statistics (packet counter) on specific UNI port.
1.3.6.1.4.1.890.1.5.12.49.11Nodeinterworking
1.3.6.1.4.1.890.1.5.12.49.11.1Nodeatmvc
1.3.6.1.4.1.890.1.5.12.49.11.1.1ScalaratmMaxNumOfVcPerPortread-onlycurrentThe maximum number of VC per port.
1.3.6.1.4.1.890.1.5.12.49.11.1.2TableatmvcTablenot-accessiblecurrentATM VC configuration table
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1RowatmvcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.1ColumnatmvcVpiread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.2ColumnatmvcVciread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.3ColumnatmvcPriorityread-createcurrentThe QoS priority of the ATM VC. The QoS priority must be unique in the VCs in the same UNI port.
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.4ColumnatmvcEncapread-createcurrentllc: LLC encapsulation vc: VC-MUX encapsulation
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.7ColumnatmvcRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.8ColumnatmvcMvlanread-createcurrentthis pvc join mvlan or not.
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.9ColumnatmvcPvidread-createcurrentJoin the VC into VLAN TRUNK untagged mode or not. NNI S-tag VLAN ID. If atmvcVlanTrunk is nojoin(2), return 1.
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.10ColumnatmvcPbitread-createcurrentJoin the VC into VLAN TRUNK untagged mode or not. NNI S-tag pbit. If atmvcVlanTrunk is nojoin(2), return 0.
1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.11ColumnatmvcVlanTrunkread-createcurrentJoin the VC into VLAN TRUNK untagged mode or not.
1.3.6.1.4.1.890.1.5.12.49.11.1.3TableatmOamF5Tablenot-accessiblecurrentATM Oam F5 test configuration table
1.3.6.1.4.1.890.1.5.12.49.11.1.3.1RowatmOamF5Entrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.1.3.1.1ColumnatmOamF5Testread-writecurrentWrite test(2) to start OAM F5 test. the value will be test(2) is the test is still on going. the value will be done(1) after test is done.
1.3.6.1.4.1.890.1.5.12.49.11.1.3.1.2ColumnatmOamF5TestResultread-onlycurrentOAM F5 test result
1.3.6.1.4.1.890.1.5.12.49.11.2NodeportIsolation
1.3.6.1.4.1.890.1.5.12.49.11.2.1ScalarportIsolationEnableread-writecurrentEnable/Disable isolation between UNI ports
1.3.6.1.4.1.890.1.5.12.49.11.2.2TableportIsolationVlanTablenot-accessiblecurrentConfigures port isolation vlan.
1.3.6.1.4.1.890.1.5.12.49.11.2.2.1RowportIsolationVlanEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.2.2.1.1ColumnportIsolationVlanVidread-onlycurrentIsolated VLAN ID.
1.3.6.1.4.1.890.1.5.12.49.11.2.2.1.2ColumnportIsolationVlanRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.3NodevlanGlobal
1.3.6.1.4.1.890.1.5.12.49.11.3.1ScalarvlanStagTpidread-writecurrentConfigures S-tag TPID value
1.3.6.1.4.1.890.1.5.12.49.11.3.2ScalarvlanSingleTagModeread-writecurrentConfigures vlan single tag mode
1.3.6.1.4.1.890.1.5.12.49.11.4NodevlanUplink
1.3.6.1.4.1.890.1.5.12.49.11.4.1TablevlanUplinkTablenot-accessiblecurrentJoins/leaves specified NNI ports to a VLAN. If an GE uplink port joined all VLAN via vlanUplinkJoinAllTable, join to individual VLAN is not allowed
1.3.6.1.4.1.890.1.5.12.49.11.4.1.1RowvlanUplinkEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.4.1.1.1ColumnvlanUplinkVlanIdread-onlycurrentVLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.4.1.1.2ColumnvlanUplinkRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.4.2TablevlanUplinkJoinAllTablenot-accessiblecurrentJoins/leaves specified NNI ports to all VLAN. If an GE uplink port joined any VLAN via vlanUplinkTable, enable Join All VLAN is not allowed
1.3.6.1.4.1.890.1.5.12.49.11.4.2.1RowvlanUplinkJoinAllEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.4.2.1.2ColumnvlanUplinkJoinAllEnableread-writecurrentJoin all VLAN.
1.3.6.1.4.1.890.1.5.12.49.11.4.3ScalarvlanUplinkMaxNumOfUntagPerPortread-onlycurrentThe maximum number of VLAN untag setting per enet port.
1.3.6.1.4.1.890.1.5.12.49.11.4.4TablevlanUplinkUntagTablenot-accessiblecurrentConfigures untag VLAN on specified NNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.4.4.1RowvlanUplinkUntagEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.4.4.1.1ColumnvlanUplinkUntagVlanIdread-onlycurrentConfigures the joined vlan that is untag in egress direction and port pvid in ingress for certain enet port. If a NNI port had joined all VLAN, vlan uplink unt…
1.3.6.1.4.1.890.1.5.12.49.11.4.4.1.2ColumnvlanUplinkUntagVlanPbitread-createcurrentPbit for untag VLAN.
1.3.6.1.4.1.890.1.5.12.49.11.4.4.1.3ColumnvlanUplinkUntagRowStatusread-createcurrentRow status of the table entry. When dot3ad is enabled, vlan-untag setting will be synchronized between GE 1 and GE 2.
1.3.6.1.4.1.890.1.5.12.49.11.5NodevlanTransparent
1.3.6.1.4.1.890.1.5.12.49.11.5.1TablevlanTransparentPortTablenot-accessiblecurrentEnable/disable VLAN transparent on the specified UNI PTM ports.
1.3.6.1.4.1.890.1.5.12.49.11.5.1.1RowvlanTransparentPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.5.1.1.1ColumnvlanTransparentPortRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.12.49.11.5.2TablevlanTransparentVcTablenot-accessiblecurrentEnable/disable VLAN transparent on the specified UNI ATM virtual circuit.
1.3.6.1.4.1.890.1.5.12.49.11.5.2.1RowvlanTransparentVcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.5.2.1.1ColumnvlanTransparentVcRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.12.49.11.6NodevlanTrunk
1.3.6.1.4.1.890.1.5.12.49.11.6.1TablevlanTrunkUntagPortTablenot-accessiblecurrentCross-connects untagged packet in the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.6.1.1RowvlanTrunkUntagPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.1ColumnvlanTrunkUntagPortModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.2ColumnvlanTrunkUntagPortNniSvlanread-createcurrentNNI S-tag VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.3ColumnvlanTrunkUntagPortNniSpbitread-createcurrentNNI S-tag pbit
1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.4ColumnvlanTrunkUntagPortNniCvlanread-createcurrentNNI C-tag VLAN ID. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.5ColumnvlanTrunkUntagPortNniCpbitread-createcurrentNNI C-tag pbit. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.6ColumnvlanTrunkUntagPortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.6.2TablevlanTrunkUntagEtypePortTablenot-accessiblecurrentCross-connects untagged packet from the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packet.
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1RowvlanTrunkUntagEtypePortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.1ColumnvlanTrunkUntagEtypePortEtyperead-onlycurrentEther type
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.2ColumnvlanTrunkUntagEtypePortModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.3ColumnvlanTrunkUntagEtypePortNniSvlanread-createcurrentNNI S-tag VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.4ColumnvlanTrunkUntagEtypePortNniSpbitread-createcurrentNNI S-tag pbit
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.5ColumnvlanTrunkUntagEtypePortNniCvlanread-createcurrentNNI C-tag VLAN ID. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.6ColumnvlanTrunkUntagEtypePortNniCpbitread-createcurrentNNI C-tag pbit. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.7ColumnvlanTrunkUntagEtypePortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.6.3TablevlanTrunkTagPortTablenot-accessiblecurrentCross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(uni-vid) VLAN if S VLAN is not specified or S(svid) + C(uni-vid) on NNI ports if S…
1.3.6.1.4.1.890.1.5.12.49.11.6.3.1RowvlanTrunkTagPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.1ColumnvlanTrunkTagPortUniNniVlanread-onlycurrentUNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured.
1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.2ColumnvlanTrunkTagPortModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.3ColumnvlanTrunkTagPortNniSvlanread-createcurrentNNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2).
1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.4ColumnvlanTrunkTagPortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.6.4TablevlanTrunkUntagVcTablenot-accessiblecurrentCross-connects untagged packet in the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.6.4.1RowvlanTrunkUntagVcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.1ColumnvlanTrunkUntagVcModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.2ColumnvlanTrunkUntagVcNniSvlanread-createcurrentNNI S-tag VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.3ColumnvlanTrunkUntagVcNniSpbitread-createcurrentNNI S-tag pbit
1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.4ColumnvlanTrunkUntagVcNniCvlanread-createcurrentNNI C-tag VLAN ID. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.5ColumnvlanTrunkUntagVcNniCpbitread-createcurrentNNI C-tag pbit. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.6ColumnvlanTrunkUntagVcRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.6.5TablevlanTrunkUntagEtypeVcTablenot-accessiblecurrentCross-connects untagged packet from the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packe…
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1RowvlanTrunkUntagEtypeVcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.1ColumnvlanTrunkUntagEtypeVcEtyperead-onlycurrentEther type
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.2ColumnvlanTrunkUntagEtypeVcModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.3ColumnvlanTrunkUntagEtypeVcNniSvlanread-createcurrentNNI S-tag VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.4ColumnvlanTrunkUntagEtypeVcNniSpbitread-createcurrentNNI S-tag pbit
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.5ColumnvlanTrunkUntagEtypeVcNniCvlanread-createcurrentNNI C-tag VLAN ID. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.6ColumnvlanTrunkUntagEtypeVcNniCpbitread-createcurrentNNI C-tag pbit. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.7ColumnvlanTrunkUntagEtypeVcRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.6.6TablevlanTrunkTagVcTablenot-accessiblecurrentCross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(uni-vid) VLAN if svlan is not specified or S(svid) + C(uni-vid) on NNI …
1.3.6.1.4.1.890.1.5.12.49.11.6.6.1RowvlanTrunkTagVcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.1ColumnvlanTrunkTagVcUniNniVlanread-onlycurrentUNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured.
1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.2ColumnvlanTrunkTagVcModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.3ColumnvlanTrunkTagVcNniSvlanread-createcurrentNNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2).
1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.4ColumnvlanTrunkTagVcRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.7NodevlanTranslation
1.3.6.1.4.1.890.1.5.12.49.11.7.1TablevlanTranslationPortTablenot-accessiblecurrentCross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.7.1.1RowvlanTranslationPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.1ColumnvlanTranslationPortUniVlanread-onlycurrentUNI VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.2ColumnvlanTranslationPortModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.3ColumnvlanTranslationPortNniSvlanread-createcurrentNNI S VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.4ColumnvlanTranslationPortNniCvlanread-createcurrentNNI C VLAN ID. if vlanTranslationPortMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.5ColumnvlanTranslationPortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.7.2TablevlanTranslationVcTablenot-accessiblecurrentCross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.7.2.1RowvlanTranslationVcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.1ColumnvlanTranslationVcUniVlanread-onlycurrentUNI VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.2ColumnvlanTranslationVcModeread-createcurrentConfigures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.3ColumnvlanTranslationVcNniSvlanread-createcurrentNNI S VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.4ColumnvlanTranslationVcNniCvlanread-createcurrentNNI S VLAN ID. if vlanTranslationVcMode is sVlan(1), the value will be ignored and always return 0.
1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.5ColumnvlanTranslationVcRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.8NodevlanTls
1.3.6.1.4.1.890.1.5.12.49.11.8.1TablevlanTlsPortTablenot-accessiblecurrentEnables Transparent LAN service on the specified UNI PTM ports. The packets are tagged with S tag on NNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.8.1.1RowvlanTlsPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.1ColumnvlanTlsPortNniSvlanread-createcurrentNNI S VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.2ColumnvlanTlsPortNniSpbitread-createcurrentNNI S PBIT. Used when vlanTlsPortNniForceSpbit is set to enable(1)
1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.3ColumnvlanTlsPortNniForceSpbitread-createcurrentForce SPBIT per vlanTlsPortNniSpbit
1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.4ColumnvlanTlsPortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.8.2TablevlanTlsVcTablenot-accessiblecurrentEnables Transparent LAN service on the specified UNI ATM virtual circuits. The packets is tagged with S tag on NNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.8.2.1RowvlanTlsVcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.1ColumnvlanTlsVcNniSvlanread-createcurrentNNI S VLAN ID
1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.2ColumnvlanTlsVcNniSpbitread-createcurrentNNI S PBIT. Used when vlanTlsVcNniForceSpbit is set to enable(1)
1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.3ColumnvlanTlsVcNniForceSpbitread-createcurrentForce SPBIT per vlanTlsVcNniSpbit
1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.4ColumnvlanTlsVcRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.9Nodefdb
1.3.6.1.4.1.890.1.5.12.49.11.9.1ScalarfdbAgingTimeread-writecurrentConfigures FDB aging time
1.3.6.1.4.1.890.1.5.12.49.11.9.2NodefdbOps
1.3.6.1.4.1.890.1.5.12.49.11.9.2.1ScalarfdbTargetread-writecurrentSpecifies the target UNI/NNI ifindex for fdbOperation
1.3.6.1.4.1.890.1.5.12.49.11.9.2.2ScalarfdbOperationread-writecurrentFlush FDB flushFDBxAddressTable(1) - flush all entries in FDB table flushFDBAddressTableForSpecifiedUNIxPorts(1) - flush entries on specified UNI/NNI ports in …
1.3.6.1.4.1.890.1.5.12.49.11.9.3TablefdbPortConfTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.9.3.1RowfdbPortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.9.3.1.1ColumnfdbPortConfMaxNumOfMacEntriesread-writecurrentConfigures FDB maximum MAC entry counts for speicifed UNI ports
1.3.6.1.4.1.890.1.5.12.49.11.9.3.1.2ColumnfdbPortConfMacModeread-writecurrentConfigures FDB MAC learning mode dynamicAndStaticMac(1) - allow both static and dynamic MAC staticMacOnly(2) - allow static MAC only
1.3.6.1.4.1.890.1.5.12.49.11.9.5TablefdbPortUniVlanConfTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.9.5.1RowfdbPortUniVlanConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.9.5.1.1ColumnfdbPortVlanConfUniVlanread-onlycurrentspeicifed UNI VLAN
1.3.6.1.4.1.890.1.5.12.49.11.9.5.1.2ColumnfdbPortVlanConfMaxNumOfMacEntriesread-createcurrentConfigures FDB maximum MAC entry counts for speicifed UNI ports and UNI VLAN
1.3.6.1.4.1.890.1.5.12.49.11.9.5.1.3ColumnfdbPortVlanConfRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.9.6TablefdbStaticMacTablenot-accessiblecurrentConfigures static MAC entry on specified UNI ports.
1.3.6.1.4.1.890.1.5.12.49.11.9.6.1RowfdbStaticMacEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.1ColumnfdbStaticMacModeread-onlycurrentsvl(1) - shared VLAN mode. fdbStaticMacVlanId should be 0. ivl(2) - individual VLAN mode. fdbStaticMacVlanId specifies the VLAN ID 1 ~ 4093.
1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.2ColumnfdbStaticMacVlanIdread-onlycurrentif fdbStaticMacMode is svl(1), the value shall be 0 if fdbStaticMacMode is ivl(2), 1 ~ 4093, determined by VLAN model VLAN model | <vlan> Trunk uni-vlan | uni-…
1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.3ColumnfdbStaticMacPhysAddressread-onlycurrentMAC address
1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.4ColumnfdbStaticMacRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.9.7TablefdbMacLearningVlanTablenot-accessiblecurrentMAC learning entry sorted by VLAN ID.
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1RowfdbMacLearningVlanEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.1ColumnfdbMacLearningVlanModeread-onlycurrentVLAN Mode sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag untag(3) - untag
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.2ColumnfdbMacLearningVlanNniSVlanread-onlycurrentNNI S VLAN ID 0 ~ 4093.
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.3ColumnfdbMacLearningVlanNniCVlanread-onlycurrentNNI C VLAN ID 1 ~ 4093. if fdbMacLearningVlanMode is sVlan(1), this OID is don't care, and the returned value is always 0
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.4ColumnfdbMacLearningVlanPhysAddressread-onlycurrentMAC address
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.5ColumnfdbMacLearningVlanUniVlanread-onlycurrentUNI VLAN ID 0 ~ 4093, 0 stands for no VLAN tag. This field for the MAC learned by Uplink port (whose ifIndex belongs to Uplink port) is meaningless and please …
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.6ColumnfdbMacLearningVlanPortread-onlycurrentifIndex the MAC is learnt on
1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.7ColumnfdbMacLearningVlanTyperead-onlycurrentMAC learning type
1.3.6.1.4.1.890.1.5.12.49.11.9.8ScalarfdbAntiSpoofingread-writecurrentEnable/Disable fdb anti-spoofing. enable: the anti-spoofing mac will be learned on the first port which receives the packet with it as source mac. When anti-sp…
1.3.6.1.4.1.890.1.5.12.49.11.9.9ScalarfdbSpoofingActionread-writecurrentEnable/Disable spoofing action function. enable: disable port when anti-spoofing is detected. disable: do nothing when anti-spoofing is detected.
1.3.6.1.4.1.890.1.5.12.49.11.10Scalarmturead-writecurrentConfigures maximum transmission unit. Unit is bytes
1.3.6.1.4.1.890.1.5.12.49.11.11Nodemirror
1.3.6.1.4.1.890.1.5.12.49.11.11.1TablemirrorPortTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.11.1.1RowmirrorPortEntrynot-accessiblecurrentAn entry in mirrorPortTable.
1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.1ColumnmirrorPortDestPortread-createcurrentSetting destination port of the mirroring.
1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.2ColumnmirrorPortDestPortVpiread-createcurrentSetting destination vpi if the destination channel is an ATM-VC, leave this field as zero if the destination channel is other type.
1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.3ColumnmirrorPortDestPortVciread-createcurrentSetting destination vci if the destination channel is an ATM-VC, leave this field as zero if the destination channel is other type.
1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.4ColumnmirrorPortDirectionread-createcurrentSet to 'ingress' to mirror ingress traffic, 'egress' to mirror egress traffic, 'both' to mirror bi-directional traffic
1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.5ColumnmirrorPortRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.11.11.2TablemirrorVcTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.11.11.2.1RowmirrorVcEntrynot-accessiblecurrentAn entry in mirrorVcTable.
1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.1ColumnmirrorVcDestPortread-createcurrentSetting destination port of the mirroring.
1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.2ColumnmirrorVcDestPortVpiread-createcurrentSetting destination vpi if the destination channel is an ATM-VC, leave this field as zero if the destination channel is other type.
1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.3ColumnmirrorVcDestPortVciread-createcurrentSetting destination vci if the destination channel is an ATM-VC, leave this field as zero if the destination channel is other type.
1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.4ColumnmirrorVcDirectionread-createcurrentSet to 'none' to disable mirroring in this port 'ingress' to mirror ingress traffic, 'egress' to mirror egress traffic, 'both' to mirror bi-directional traffic
1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.5ColumnmirrorVcRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.12Nodepppoe
1.3.6.1.4.1.890.1.5.12.49.12.1TablepppoeAgentTablenot-accessiblecurrentA table that contains PPPoE intermediate agent configuration.
1.3.6.1.4.1.890.1.5.12.49.12.1.1RowpppoeAgentEntrynot-accessiblecurrentAn entry of pppoeAgentTable.
1.3.6.1.4.1.890.1.5.12.49.12.1.1.1ColumnpppoeAgentVlanIdread-onlycurrentSpecify the VLAN ID for the pppoeAgent configuration
1.3.6.1.4.1.890.1.5.12.49.12.1.1.2ColumnpppoeAgentModeread-createcurrentpppoeTransparent(1) - PPPoE frames are transparent pppoeIA(2) - PPPoE intermediate agent function is enabled
1.3.6.1.4.1.890.1.5.12.49.12.1.1.3ColumnpppoeAgentCircuitIDEnableread-createcurrentEnable/disable insert the circuit ID to PPPoE packet in intermediate agent mode.
1.3.6.1.4.1.890.1.5.12.49.12.1.1.4ColumnpppoeAgentCircuitIDInforead-createcurrentUser specific PPPoE circuit ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>?,./ %%: equals character %…
1.3.6.1.4.1.890.1.5.12.49.12.1.1.5ColumnpppoeAgentRemoteIDEnableread-createcurrentEnable/disable insert the remote ID to PPPoE packet in intermediate agent mode.
1.3.6.1.4.1.890.1.5.12.49.12.1.1.6ColumnpppoeAgentRemoteIDInforead-createcurrentUser specific PPPoE remote ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>?,./ %%: equals character % …
1.3.6.1.4.1.890.1.5.12.49.12.1.1.7ColumnpppoeAgentRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.12.2NodepppoeTest
1.3.6.1.4.1.890.1.5.12.49.12.2.1ScalarpppoeTestPortread-writecurrentSetting the port of the test PPPoE session.
1.3.6.1.4.1.890.1.5.12.49.12.2.2ScalarpppoeTestVlanModeread-writecurrentSetting the VLAN mode of the test PPPoE session.
1.3.6.1.4.1.890.1.5.12.49.12.2.3ScalarpppoeTestSvidread-writecurrentSetting the SVID of the test PPPoE session.
1.3.6.1.4.1.890.1.5.12.49.12.2.4ScalarpppoeTestCvidread-writecurrentSetting the CVID of the test PPPoE session.
1.3.6.1.4.1.890.1.5.12.49.12.2.5ScalarpppoeTestOpsread-writecurrentSet the object to 1 to test PPPoE session.
1.3.6.1.4.1.890.1.5.12.49.12.2.6ScalarpppoeTestStatusread-onlycurrentDisplay status of testing PPPoE session.
1.3.6.1.4.1.890.1.5.12.49.13Nodeqos
1.3.6.1.4.1.890.1.5.12.49.13.1ScalarqosAtmVcShapingEnableread-writecurrentEnable/Disable per-VC shaping for ATM VC.
1.3.6.1.4.1.890.1.5.12.49.13.2ScalarqosMaxNumOfShapingProfilesread-onlycurrentThe maximum number of shaping profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.13.3TableqosShapingProfileTablenot-accessiblecurrentConfigures shaping profiles.
1.3.6.1.4.1.890.1.5.12.49.13.3.1RowqosShapingProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.13.3.1.1ColumnqosShapingProfileNameread-onlycurrentProfile name
1.3.6.1.4.1.890.1.5.12.49.13.3.1.2ColumnqosShapingProfileQueue7MaxRateread-createcurrentThe maximum rate of queue 7.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.3ColumnqosShapingProfileQueue6MaxRateread-createcurrentThe maximum rate of queue 6.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.4ColumnqosShapingProfileQueue5MaxRateread-createcurrentThe maximum rate of queue 5.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.5ColumnqosShapingProfileQueue4MaxRateread-createcurrentThe maximum rate of queue 4.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.6ColumnqosShapingProfileQueue3MaxRateread-createcurrentThe maximum rate of queue 3.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.7ColumnqosShapingProfileQueue2MaxRateread-createcurrentThe maximum rate of queue 2.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.8ColumnqosShapingProfileQueue1MaxRateread-createcurrentThe maximum rate of queue 1.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.9ColumnqosShapingProfileQueue0MaxRateread-createcurrentThe maximum rate of queue 0.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.10ColumnqosShapingProfileQueue7Depthread-createcurrentThe queue depth of queue 7.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.11ColumnqosShapingProfileQueue6Depthread-createcurrentThe queue depth of queue 6.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.12ColumnqosShapingProfileQueue5Depthread-createcurrentThe queue depth of queue 5.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.13ColumnqosShapingProfileQueue4Depthread-createcurrentThe queue depth of queue 4.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.14ColumnqosShapingProfileQueue3Depthread-createcurrentThe queue depth of queue 3.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.15ColumnqosShapingProfileQueue2Depthread-createcurrentThe queue depth of queue 2.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.16ColumnqosShapingProfileQueue1Depthread-createcurrentThe queue depth of queue 1.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.17ColumnqosShapingProfileQueue0Depthread-createcurrentThe queue depth of queue 0.
1.3.6.1.4.1.890.1.5.12.49.13.3.1.18ColumnqosShapingProfileRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.13.6ScalarqosMaxNumOfVcShapingProfilesread-onlycurrentThe maximum number of VC shaping profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.13.7TableqosVcShapingProfileTablenot-accessiblecurrentConfigures ATM shaping profiles.
1.3.6.1.4.1.890.1.5.12.49.13.7.1RowqosVcShapingProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.13.7.1.1ColumnqosVcShapingProfileNameread-onlycurrentProfile name
1.3.6.1.4.1.890.1.5.12.49.13.7.1.2ColumnqosVcShapingProfileMaxRateread-createcurrentThe max rate of VC shaping profile.
1.3.6.1.4.1.890.1.5.12.49.13.7.1.3ColumnqosVcShapingProfileQueueDepthread-createcurrentThe queue depth of VC shaping profile.
1.3.6.1.4.1.890.1.5.12.49.13.7.1.4ColumnqosVcShapingProfileRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.13.8TableqosPortConfTablenot-accessiblecurrentConfigures referenced QoS algorithm and QoS profile to UNI ports
1.3.6.1.4.1.890.1.5.12.49.13.8.1RowqosPortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.13.8.1.1ColumnqosPortConfShapingProfileread-writecurrentConfigures shaping profile on specified UNI port.
1.3.6.1.4.1.890.1.5.12.49.13.8.1.3ColumnqosPortConfAlgorithmread-writecurrentConfigures QoS algorighm on specified UNI port.
1.3.6.1.4.1.890.1.5.12.49.13.8.1.4ColumnqosPortConfMaxRateread-writecurrentConfigures maximum rate on specified UNI port.
1.3.6.1.4.1.890.1.5.12.49.13.8.1.5ColumnqosPortConfWeightProfileread-writecurrentConfigures weight profile on specified UNI port.
1.3.6.1.4.1.890.1.5.12.49.13.9TableqosVcConfTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.13.9.1RowqosVcConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.13.9.1.1ColumnqosVcConfShapingProfileread-writecurrentConfigures ATM shaping profile on specified ATM VC.
1.3.6.1.4.1.890.1.5.12.49.13.10NodequeueMapping
1.3.6.1.4.1.890.1.5.12.49.13.10.1ScalarqueueMappingPbit7QueueIdread-writecurrentConfigures pbit 7 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.10.2ScalarqueueMappingPbit6QueueIdread-writecurrentConfigures pbit 6 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.10.3ScalarqueueMappingPbit5QueueIdread-writecurrentConfigures pbit 5 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.10.4ScalarqueueMappingPbit4QueueIdread-writecurrentConfigures pbit 4 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.10.5ScalarqueueMappingPbit3QueueIdread-writecurrentConfigures pbit 3 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.10.6ScalarqueueMappingPbit2QueueIdread-writecurrentConfigures pbit 2 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.10.7ScalarqueueMappingPbit1QueueIdread-writecurrentConfigures pbit 1 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.10.8ScalarqueueMappingPbit0QueueIdread-writecurrentConfigures pbit 0 mapping to specified queue ID.
1.3.6.1.4.1.890.1.5.12.49.13.11Nodedscp
1.3.6.1.4.1.890.1.5.12.49.13.11.1TabledscpMappingTablenot-accessiblecurrentThe table contains DSCP mapping configuration.
1.3.6.1.4.1.890.1.5.12.49.13.11.1.1RowdscpMappingEntrynot-accessiblecurrentAn entry of dscpMappingTable.
1.3.6.1.4.1.890.1.5.12.49.13.11.1.1.1ColumndscpSrcCodePointread-onlycurrentThe DSCP source code point used for mapping.
1.3.6.1.4.1.890.1.5.12.49.13.11.1.1.2ColumndscpMapPriorityread-writecurrentThe mapping p bits that will replace the source p bits in the incoming packet.
1.3.6.1.4.1.890.1.5.12.49.13.11.2TabledscpPortTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the xDSL and ethernet ports.
1.3.6.1.4.1.890.1.5.12.49.13.11.2.1RowdscpPortEntrynot-accessiblecurrentAn entry of dscpPortTable.
1.3.6.1.4.1.890.1.5.12.49.13.11.2.1.1ColumndscpStatusEnableread-writecurrentThe DSCP port status.
1.3.6.1.4.1.890.1.5.12.49.13.12ScalarqosMaxNumOfWeightProfilesread-onlycurrentThe maximum number of weight profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.13.13TableqosWeightProfileTablenot-accessiblecurrentConfigures weight profiles.
1.3.6.1.4.1.890.1.5.12.49.13.13.1RowqosWeightProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.13.13.1.1ColumnqosWeightProfileNameread-onlycurrentName of Weight profile. This is a table index.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.2ColumnqosWeightProfileQueue7Weightread-createcurrentThe weight setting of queue 7.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.3ColumnqosWeightProfileQueue6Weightread-createcurrentThe weight setting of queue 6.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.4ColumnqosWeightProfileQueue5Weightread-createcurrentThe weight setting of queue 5.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.5ColumnqosWeightProfileQueue4Weightread-createcurrentThe weight setting of queue 4.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.6ColumnqosWeightProfileQueue3Weightread-createcurrentThe weight setting of queue 3.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.7ColumnqosWeightProfileQueue2Weightread-createcurrentThe weight setting of queue 2.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.8ColumnqosWeightProfileQueue1Weightread-createcurrentThe weight setting of queue 1.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.9ColumnqosWeightProfileQueue0Weightread-createcurrentThe weight setting of queue 0.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.10ColumnqosWeightProfileQueue7Depthread-createcurrentThe queue depth of queue 7.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.11ColumnqosWeightProfileQueue6Depthread-createcurrentThe queue depth of queue 6.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.12ColumnqosWeightProfileQueue5Depthread-createcurrentThe queue depth of queue 5.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.13ColumnqosWeightProfileQueue4Depthread-createcurrentThe queue depth of queue 4.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.14ColumnqosWeightProfileQueue3Depthread-createcurrentThe queue depth of queue 3.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.15ColumnqosWeightProfileQueue2Depthread-createcurrentThe queue depth of queue 2.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.16ColumnqosWeightProfileQueue1Depthread-createcurrentThe queue depth of queue 1.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.17ColumnqosWeightProfileQueue0Depthread-createcurrentThe queue depth of queue 0.
1.3.6.1.4.1.890.1.5.12.49.13.13.1.18ColumnqosWeightProfileRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.14Nodeservice
1.3.6.1.4.1.890.1.5.12.49.14.2TablesecuredClientIpTablenot-accessiblecurrentA table that contains information about IPv4 secured clients.
1.3.6.1.4.1.890.1.5.12.49.14.2.1RowsecuredClientIpEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.890.1.5.12.49.14.2.1.1ColumnsecuredClientIpIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.12.49.14.2.1.2ColumnsecuredClientIpStartIpAddressread-writecurrentThe start IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings.
1.3.6.1.4.1.890.1.5.12.49.14.2.1.3ColumnsecuredClientIpEndIpAddressread-writecurrentThe end IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings.
1.3.6.1.4.1.890.1.5.12.49.14.2.1.4ColumnsecuredClientIpServiceread-writecurrentEach bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions …
1.3.6.1.4.1.890.1.5.12.49.14.2.1.5ColumnsecuredClientIpEnableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.890.1.5.12.49.14.3TablesecuredClientIpv6Tablenot-accessiblecurrentA table that contains information about IPv6 secured clients.
1.3.6.1.4.1.890.1.5.12.49.14.3.1RowsecuredClientIpv6Entrynot-accessiblecurrentA list of IPv6 secured client entry.
1.3.6.1.4.1.890.1.5.12.49.14.3.1.1ColumnsecuredClientIpv6Indexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.12.49.14.3.1.2ColumnsecuredClientIpv6IpAddressread-writecurrentThe IP address (:: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) of the IPv6 secured client settings.
1.3.6.1.4.1.890.1.5.12.49.14.3.1.3ColumnsecuredClientIpv6IpMaskread-writecurrentThe Mask of the IPv6 secured client settings.
1.3.6.1.4.1.890.1.5.12.49.14.3.1.4ColumnsecuredClientIpv6Serviceread-writecurrentEach bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions …
1.3.6.1.4.1.890.1.5.12.49.14.3.1.5ColumnsecuredClientIpv6Enableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.890.1.5.12.49.15Nodesnmp
1.3.6.1.4.1.890.1.5.12.49.15.1TablesnmpTrapDestTablenot-accessiblecurrentSets the IP addresses of up to four SNMP managers (stations to send your SNMP traps to). You can configure up to four managers.
1.3.6.1.4.1.890.1.5.12.49.15.1.1RowsnmpTrapDestEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.15.1.1.1ColumnsnmpTrapDestIndexread-onlycurrentindex of the table
1.3.6.1.4.1.890.1.5.12.49.15.1.1.2ColumnsnmpTrapDestIpAddressTyperead-writecurrentSNMP trap destination IP address type
1.3.6.1.4.1.890.1.5.12.49.15.1.1.3ColumnsnmpTrapDestIpAddressread-writecurrentSNMP trap destination IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> :: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff Limit: snmpTrapDestIpAddr…
1.3.6.1.4.1.890.1.5.12.49.15.1.1.4ColumnsnmpTrapDestUdpPortread-writecurrentSNMP manager UDP port.
1.3.6.1.4.1.890.1.5.12.49.15.1.1.5ColumnsnmpTrapDestVersionread-writecurrentSNMP version.
1.3.6.1.4.1.890.1.5.12.49.15.1.1.6ColumnsnmpTrapDestUserNameread-writecurrentMust match an existing account on the Switch.
1.3.6.1.4.1.890.1.5.12.49.15.2ScalarsnmpGetCommunityread-writecurrentSets the get community. Only for SNMPv2c or lower.
1.3.6.1.4.1.890.1.5.12.49.15.3ScalarsnmpSetCommunityread-writecurrentSets the set community. Only for SNMPv2c or lower. Can input with plain text or ciphertext. Show ciphertext. plain text: 1 ~ 31 printable characters. ciphertex…
1.3.6.1.4.1.890.1.5.12.49.15.4ScalarsnmpTrapCommunityread-writecurrentSets the trap community. Only for SNMPv2c or lower.
1.3.6.1.4.1.890.1.5.12.49.15.5TablesnmpUserTablenot-accessiblecurrentSets the authentication level for SNMP v3 user authentication. Optionally, specifies the authentication and encryption methods for communication with the SNMP …
1.3.6.1.4.1.890.1.5.12.49.15.5.1RowsnmpUserEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.15.5.1.1ColumnsnmpUserNameread-onlycurrentUser name
1.3.6.1.4.1.890.1.5.12.49.15.5.1.2ColumnsnmpUserSecurityLevelread-writecurrentnoauth: Use the username as the password string sent to the SNMP manager. This is equivalent to the Get, Set and Trap Community in SNMP v2c. This is the lowest…
1.3.6.1.4.1.890.1.5.12.49.15.5.1.3ColumnsnmpUserAuthProtocolread-writecurrentSpecify MD5 or SHA authentication algorithm.
1.3.6.1.4.1.890.1.5.12.49.15.5.1.4ColumnsnmpUserPrivProtocolread-writecurrentSpecify DES or AES encryption algorithm.
1.3.6.1.4.1.890.1.5.12.49.15.6ScalarsnmpVersionread-writecurrentSets the SNMP version to use for communication with the SNMP manager. v2c: v2c only v3: v3 only v3v2c: v2c and v3. version 3 read/write, version 2 read only.
1.3.6.1.4.1.890.1.5.12.49.16Nodesys
1.3.6.1.4.1.890.1.5.12.49.16.1ScalarsysBootupFwVersionread-onlycurrentDisplay the version of the currently running firmware.
1.3.6.1.4.1.890.1.5.12.49.16.2ScalarsysImage1FwVersionread-onlycurrentDisplays the version of the currently installed 1st firmware image on the flash memory.
1.3.6.1.4.1.890.1.5.12.49.16.3ScalarsysImage2FwVersionread-onlycurrentDisplays the version of the currently installed 2nd firmware image on the flash memory.
1.3.6.1.4.1.890.1.5.12.49.16.4ScalarsysBootupImageread-onlycurrentCurrent firmware image the system booted up.
1.3.6.1.4.1.890.1.5.12.49.16.5ScalarsysBootupConfigread-onlycurrentCurrent configuration file the system booted up.
1.3.6.1.4.1.890.1.5.12.49.16.6NodesysOps
1.3.6.1.4.1.890.1.5.12.49.16.6.1ScalarsysTargetread-writecurrentSpecifies target UNI or NNI ifindex for sysOperation. From left to right, the nth bit is 1 that means ifindex n is target port. ex: # 0x00 0x00 0x00 0x00 0x00 …
1.3.6.1.4.1.890.1.5.12.49.16.6.2ScalarsysOperationread-writecurrentThe agent will reset the object's value to zero when the operation is done. To perform erase port config with attributes, besides sysTarget, sysAttributeSelect…
1.3.6.1.4.1.890.1.5.12.49.16.6.3ScalarsysSourceread-writecurrentSpecifies source UNI or NNI ifindex for sysOperation. sysSource need to be set when performing config port copy, and note that only one port can be set. From l…
1.3.6.1.4.1.890.1.5.12.49.16.6.4ScalarsysAttributeSelectread-writecurrentWhen erasing or copying port config, user can select specific attribute to erase/copy. If user enter zero-length string, 0x00 (all bits are not set) or 0xFF (a…
1.3.6.1.4.1.890.1.5.12.49.16.7NodesysTimeSetup
1.3.6.1.4.1.890.1.5.12.49.16.7.1ScalarsysTimeServerModeread-writecurrentThe mechanism of Time Server when the system boots up.
1.3.6.1.4.1.890.1.5.12.49.16.7.2ScalarsysTimeServerIPTyperead-writecurrentThe IP Address type
1.3.6.1.4.1.890.1.5.12.49.16.7.3ScalarsysTimeServerIPread-writecurrentThe IP Address of Time Server
1.3.6.1.4.1.890.1.5.12.49.16.7.4ScalarsysTimeSystemTimeread-writecurrentThe system time in hh/mm/ss format hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.16.7.5ScalarsysTimeSystemDateread-writecurrentThe system date in mm/dd/yyyy format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037
1.3.6.1.4.1.890.1.5.12.49.16.7.6ScalarsysTimeSystemTimeZoneread-writecurrentThe system time zone
1.3.6.1.4.1.890.1.5.12.49.16.7.7ScalarsysTimeServerSynchronizeread-writecurrentSynchronize current system time with time server
1.3.6.1.4.1.890.1.5.12.49.16.7.8ScalarsysTimeDaylightSaveEnableread-writecurrentEnables/Disables daylight saving on the Switch.
1.3.6.1.4.1.890.1.5.12.49.16.7.9ScalarsysTimeDaylightSaveStartDateWeekread-writecurrentConfigures daylight saving start-date week.
1.3.6.1.4.1.890.1.5.12.49.16.7.10ScalarsysTimeDaylightSaveStartDateDayread-writecurrentConfigures daylight saving start-date day.
1.3.6.1.4.1.890.1.5.12.49.16.7.11ScalarsysTimeDaylightSaveStartDateMonthread-writecurrentConfigures daylight saving start-date month.
1.3.6.1.4.1.890.1.5.12.49.16.7.12ScalarsysTimeDaylightSaveStartDateClockread-writecurrentConfigures daylight saving start-date o'clock.
1.3.6.1.4.1.890.1.5.12.49.16.7.13ScalarsysTimeDaylightSaveEndDateWeekread-writecurrentConfigures daylight saving end-date week.
1.3.6.1.4.1.890.1.5.12.49.16.7.14ScalarsysTimeDaylightSaveEndDateDayread-writecurrentConfigures daylight saving end-date day.
1.3.6.1.4.1.890.1.5.12.49.16.7.15ScalarsysTimeDaylightSaveEndDateMonthread-writecurrentConfigures daylight saving end-date month.
1.3.6.1.4.1.890.1.5.12.49.16.7.16ScalarsysTimeDaylightSaveEndDateClockread-writecurrentConfigures daylight saving end-date o'clock.
1.3.6.1.4.1.890.1.5.12.49.16.7.17ScalarsysTimeServerLastSynchronizeStatusread-onlycurrentThe status of the last synchronization with time server
1.3.6.1.4.1.890.1.5.12.49.16.7.18ScalarsysTimeServerLastSynchronizeTimeread-onlycurrentLast time synchronization with time server
1.3.6.1.4.1.890.1.5.12.49.16.9NodesysPmSync
1.3.6.1.4.1.890.1.5.12.49.16.9.1ScalarsysPmSyncUrlread-writecurrentThe FTP URL to sync PM file from ves1724-58v to EMS. The URL only contians the path to put the PM file. The format is ftp://<user>:<password>@<host>[:<port>]/<…
1.3.6.1.4.1.890.1.5.12.49.16.9.2ScalarsysPmSyncEnableread-writecurrentIf sysPmSyncEnable is enable(1), EAN sync PM file to EMS every 15 min. The file location and file name is per sysPmSyncUrl.
1.3.6.1.4.1.890.1.5.12.49.16.9.3ScalarsysPmSyncDelayread-writecurrentSets the delay time of PM file uploading after 15-min boundary
1.3.6.1.4.1.890.1.5.12.49.16.9.4ScalarsysPmSyncStatusread-onlycurrentReturns the PM sync state machine state. idle(1) - PM sync disabled uploaded(2) - PM sync enabled or PM file uploaded down uploading(3) - PM file is uploading …
1.3.6.1.4.1.890.1.5.12.49.16.11ScalarsysNniTyperead-onlycurrentThe NNI port type. GE or GPON uplink.
1.3.6.1.4.1.890.1.5.12.49.16.14Nodeaaa
1.3.6.1.4.1.890.1.5.12.49.16.14.1Nodeauthen
1.3.6.1.4.1.890.1.5.12.49.16.14.1.1ScalarloginMethod1read-writecurrentThe first method of login authentication
1.3.6.1.4.1.890.1.5.12.49.16.14.1.2ScalarloginMethod2read-writecurrentThe second method of enable authentication.
1.3.6.1.4.1.890.1.5.12.49.16.14.1.3ScalarloginMethod3read-writecurrentThe third method of enable authentication.
1.3.6.1.4.1.890.1.5.12.49.16.14.1.4ScalarenableMethod1read-writecurrentThe first method of enable authentication.
1.3.6.1.4.1.890.1.5.12.49.16.14.1.5ScalarenableMethod2read-writecurrentThe second method of enable authentication.
1.3.6.1.4.1.890.1.5.12.49.16.14.1.6ScalarenableMethod3read-writecurrentThe third method of enable authentication.
1.3.6.1.4.1.890.1.5.12.49.16.14.2Nodeacct
1.3.6.1.4.1.890.1.5.12.49.16.14.2.1ScalarsystemMethodread-writecurrentset the accounting method for system level recording
1.3.6.1.4.1.890.1.5.12.49.16.14.2.2ScalarexecMethodread-writecurrentset the accounting method for exec level accounting.
1.3.6.1.4.1.890.1.5.12.49.16.14.2.3ScalarexecModeread-writecurrentset the update mode for exec level accounting. start-stop: Send start, stop event to server during administrator log in and log out the shell, and periodically…
1.3.6.1.4.1.890.1.5.12.49.16.14.2.4ScalarcommandsPrivilegeread-writecurrentset the command privilege level(1~14) for accounting command privilege 0 means disable
1.3.6.1.4.1.890.1.5.12.49.16.14.2.5ScalarupdatePeriodread-writecurrentset the update interval of accounting, 1~2147483647 minutes
1.3.6.1.4.1.890.1.5.12.49.16.14.2.6ScalarcommandsMethodread-onlycurrentshow the accounting method for commands level accounting.
1.3.6.1.4.1.890.1.5.12.49.16.14.3Nodeauthor
1.3.6.1.4.1.890.1.5.12.49.16.14.3.1TableauthorPrivModeTablenot-accessiblecurrentThis table is to configure the mode of authorization for each privilege
1.3.6.1.4.1.890.1.5.12.49.16.14.3.1.1RowauthorPrivModeEntrynot-accessiblecurrentAn entry of authorPrivModeEntry.
1.3.6.1.4.1.890.1.5.12.49.16.14.3.1.1.1ColumnauthorPrivilegeread-onlycurrentSet the privilege level for authorization, every command will have its assigned privilege, authorization happens when user executes a command which privilege i…
1.3.6.1.4.1.890.1.5.12.49.16.14.3.1.1.2ColumnauthorModeread-writecurrentSet the authorization mode when authorization occurred. none: no authorization local: commands will be authorized with default privilege tacacs+: authorization…
1.3.6.1.4.1.890.1.5.12.49.16.14.4Noderadius
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1NoderadiusAuthen
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.1ScalarradiusAuthenRedundantModeread-writecurrentConfigure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact …
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.2ScalarradiusAuthenTimeoutPeriodread-writecurrentSet the timeout interval in seconds that the device waits for response from the server. 1~300 seconds When two servers configured and mode is index-priority, t…
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3TableradiusAuthenServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1RowradiusAuthenServerEntrynot-accessiblecurrentAn entry of radiusAuthenServerTable.
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.1ColumnradiusAuthenServerIndexread-onlycurrentThe index of the server.
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.2ColumnradiusAuthenServerIPread-writecurrentThe IP address of specified radius server.
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.3ColumnradiusAuthenServerPortread-writecurrentThe UDP port of specified radius server
1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.4ColumnradiusAuthenServerSecretread-writecurrentA string key shared with the radius server
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2NoderadiusAcct
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.1ScalarradiusAcctRedundantModeread-writecurrentConfigure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact …
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.2ScalarradiusAcctTimeoutPeriodread-writecurrentSet the timeout interval in seconds that the device waits for response from the server. 1~60 seconds. When two servers configured and mode is index-priority, t…
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3TableradiusAcctServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1RowradiusAcctServerEntrynot-accessiblecurrentAn entry of radiusAcctServerTable.
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.1ColumnradiusAcctServerIndexread-onlycurrentThe index of the server.
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.2ColumnradiusAcctServerIPread-writecurrentThe IP address of specified radius server.
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.3ColumnradiusAcctServerPortread-writecurrentThe UDP port of specified radius server
1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.4ColumnradiusAcctServerSecretread-writecurrentA string key shared with the radius server
1.3.6.1.4.1.890.1.5.12.49.16.14.5Nodetacacsplus
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1NodetacacsplusAuthen
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.1ScalartacacsplusAuthenRedundantModeread-writecurrentConfigure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact …
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.2ScalartacacsplusAuthenTimeoutPeriodread-writecurrentSet the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, …
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3TabletacacsplusAuthenServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1RowtacacsplusAuthenServerEntrynot-accessiblecurrentAn entry of tacacsplusAuthServerTable.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.1ColumntacscsplusAuthenServerIndexread-onlycurrentThe index of the server.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.2ColumntacscsplusAuthenServerIPread-writecurrentThe IP address of specified tacacs+ server.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.3ColumntacscsplusAuthenServerPortread-writecurrentThe TCP port of specified tacacs+ server
1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.4ColumntacscsplusAuthenServerSecretread-writecurrentA string key shared with the tacacs+ server
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2NodetacacsplusAcct
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.1ScalartacacsplusAcctRedundantModeread-writecurrentConfigure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact …
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.2ScalartacacsplusAcctTimeoutPeriodread-writecurrentSet the timeout interval in seconds that the device waits for response from the server. 1~60 seconds. When two servers configured and mode is index-priority, t…
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3TabletacacsplusAcctServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1RowtacacsplusAcctServerEntrynot-accessiblecurrentAn entry of tacacsplusAcctServerTable.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.1ColumntacacsplusAcctServerIndexread-onlycurrentThe index of the server.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.2ColumntacacsplusAcctServerIPread-writecurrentThe IP address of specified tacacs+ server.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.3ColumntacacsplusAcctServerPortread-writecurrentThe TCP port of specified tacacs+ server
1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.4ColumntacacsplusAcctServerSecretread-writecurrentA string key shared with the tacacs+ server
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3NodetacacsplusAuthor
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.1ScalartacacsplusAuthorRedundantModeread-writecurrentConfigure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact …
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.2ScalartacacsplusAuthorTimeoutPeriodread-writecurrentTimeout period (second) of command authorization via TACACS+. 1~300 seconds When two servers configured and mode is index-priority, the actual timeout will be …
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3TabletacacsplusAuthorServerTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1RowtacacsplusAuthorServerEntrynot-accessiblecurrentAn entry of tacacsplusAuthorServerEntry. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.1ColumntacacsplusAuthorServerIndexread-onlycurrentThe index of the server.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.2ColumntacacsplusAuthorServerIPread-writecurrentTACACS+ server IP for command authorization.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.3ColumntacacsplusAuthorServerPortread-writecurrentTACACS+ server port for command authorization.
1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.4ColumntacacsplusAuthorServerSecretread-writecurrentTACACS+ server secret key for command authorization.
1.3.6.1.4.1.890.1.5.12.49.16.15ScalarsysPowerSourceread-onlycurrentCurrent power source.
1.3.6.1.4.1.890.1.5.12.49.16.17ScalarsysLoginMessageread-writecurrentSets the location information for console, TELNET, SSH, and WEBGUI.
1.3.6.1.4.1.890.1.5.12.49.16.19NodesysConfiglog
1.3.6.1.4.1.890.1.5.12.49.16.19.1ScalarsysConfigLastChangeTimeread-onlycurrentThe string representation of occurence time of last configuration change.
1.3.6.1.4.1.890.1.5.12.49.16.19.2ScalarsysConfigLastChangeSessionread-onlycurrentThe string representation of session type of last configuration change.
1.3.6.1.4.1.890.1.5.12.49.16.19.3ScalarsysConfigLastChangeUserread-onlycurrentThe string representation of user of last configuration change.
1.3.6.1.4.1.890.1.5.12.49.16.19.4ScalarsysConfigLastChangeLocationread-onlycurrentThe string representation of location (it's IP address in most situation) of last configuration change.
1.3.6.1.4.1.890.1.5.12.49.16.20NodesysReboot
1.3.6.1.4.1.890.1.5.12.49.16.20.1ScalarsysRebootActionread-writecurrentPerforms actions to the scheduled reboot.
1.3.6.1.4.1.890.1.5.12.49.16.20.2ScalarsysRebootTimerread-writecurrent5~86400 seconds, 0: reboot immediately.
1.3.6.1.4.1.890.1.5.12.49.17Nodevdsl
1.3.6.1.4.1.890.1.5.12.49.17.1Nodeselt
1.3.6.1.4.1.890.1.5.12.49.17.1.1ScalarseltTargetread-writecurrentIfIndex of the port which would be performed single end loopback test.
1.3.6.1.4.1.890.1.5.12.49.17.1.2ScalarseltOpsread-writecurrentThe manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is not in progress.
1.3.6.1.4.1.890.1.5.12.49.17.1.3ScalarseltStatusread-onlycurrentStatus description of the selt result.
1.3.6.1.4.1.890.1.5.12.49.17.1.4ScalarseltCableTyperead-onlycurrentThe cable type that selt result indicates. The two kind of cable type are PE 0.4mm and PE 0.5mm.
1.3.6.1.4.1.890.1.5.12.49.17.1.5ScalarseltLoopEstimateLengthFtread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.12.49.17.1.6ScalarseltLoopEstimateLengthMeterread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.12.49.17.1.7ScalarseltLoopTerminalread-onlycurrentThe loop terminal that selt result indicates.
1.3.6.1.4.1.890.1.5.12.49.17.1.8ScalarseltAttenuation180khzread-onlycurrentThe estimated attenuation in dB at 180 kHz.
1.3.6.1.4.1.890.1.5.12.49.17.1.9ScalarseltAttenuation300khzread-onlycurrentThe estimated attenuation in dB at 300 kHz
1.3.6.1.4.1.890.1.5.12.49.17.2NodevdslOps
1.3.6.1.4.1.890.1.5.12.49.17.2.1ScalarvdslTargetread-writecurrentTarget DSL ifindex to clear packet statistics.
1.3.6.1.4.1.890.1.5.12.49.17.2.2ScalarvdslOperationread-writecurrentclearCurrPerformance: Clear current performance on the target DSL ifindex specified by vdslTarget. clearCurr15MinPerformance: Clear current 15 minutes performa…
1.3.6.1.4.1.890.1.5.12.49.17.3TablesubrPortTablenot-accessiblecurrentThis table includes subscriber attributes for the port.
1.3.6.1.4.1.890.1.5.12.49.17.3.1RowsubrPortEntrynot-accessiblecurrentAn entry in subrPortTable.
1.3.6.1.4.1.890.1.5.12.49.17.3.1.1ColumnsubrPortNameread-writecurrentName of the subscriber.
1.3.6.1.4.1.890.1.5.12.49.17.3.1.2ColumnsubrPortAlarmProfread-writecurrentAlarm profile for the subscriber port(s).
1.3.6.1.4.1.890.1.5.12.49.17.4Nodevdsl2Profile
1.3.6.1.4.1.890.1.5.12.49.17.4.1Tablevdsl2LineConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 line profile extension configuration.
1.3.6.1.4.1.890.1.5.12.49.17.4.1.1Rowvdsl2LineConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdsl2LineProfileExtendedEntry.
1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.1Columnvdsl2LineConfProfileDpboEPsdIDread-writecurrentstandard psd shape id for psd toolbox
1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.2Columnvdsl2LineConfProfileBitSwapDsread-writecurrentEnable or disable downstream bit swap.
1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.3Columnvdsl2LineConfProfileBitSwapUsread-writecurrentEnable or disable upstream bit swap.
1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.4Columnvdsl2LineConfProfileTransmissionTyperead-writecurrentThe transmission mode when link up.
1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.5Columnvdsl2LineConfProfileProfileNameread-onlycurrentThe line profile name.
1.3.6.1.4.1.890.1.5.12.49.17.4.2Tablevdsl2LineAlarmConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 line alarm profile extension configuration.
1.3.6.1.4.1.890.1.5.12.49.17.4.2.1Rowvdsl2LineAlarmConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdsl2LineAlarmConfProfileExtendedEntry.
1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.1Columnvdsl2LineAlarmConfProfileXtucThresh15MinLofsread-writecurrentA threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc 1. The value 0 means that no threshold is specified for the associated counter. …
1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.2Columnvdsl2LineAlarmConfProfileXturThresh15MinLofsread-writecurrentA threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur 2. The value 0 means that no threshold is specified for the associated counter. …
1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.3Columnvdsl2LineAlarmConfProfileXturThresh15MinLprsread-writecurrentA threshold for the xdsl2PMLCurr15MLprs counter. The value 0 means that no threshold is specified for the associated counter. Units:seconds
1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.4Columnvdsl2LineAlarmConfProfileProfileNameread-onlycurrentThe alarm line profile name.
1.3.6.1.4.1.890.1.5.12.49.17.4.3Tablevdsl2ChanConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 channel profile extension configuration.
1.3.6.1.4.1.890.1.5.12.49.17.4.3.1Rowvdsl2ChanConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdsl2ChanConfProfileExtendedEntry.
1.3.6.1.4.1.890.1.5.12.49.17.4.3.1.1Columnvdsl2ChanConfProfilePhyRDsread-writecurrentConfigure downstream PhyR mode.
1.3.6.1.4.1.890.1.5.12.49.17.4.3.1.2Columnvdsl2ChanConfProfilePhyRUsread-writecurrentConfigure upstream PhyR mode.
1.3.6.1.4.1.890.1.5.12.49.17.4.3.1.3Columnvdsl2ChanConfProfileProfileNameread-onlycurrentThe channel profile name.
1.3.6.1.4.1.890.1.5.12.49.17.5Nodevdsl2Stats
1.3.6.1.4.1.890.1.5.12.49.17.5.1Tablexdsl2LineBandExtendedTablenot-accessiblecurrentThis table show tx power of band.
1.3.6.1.4.1.890.1.5.12.49.17.5.1.1Rowxdsl2LineBandExtendedEntrynot-accessiblecurrentAn entry of xdsl2LineBandExtendedTable.
1.3.6.1.4.1.890.1.5.12.49.17.5.1.1.1Columnxdsl2LineBandTxPowerread-onlycurrentXdsl line band Tx power (in unit of 0.1 Dbm, -1280 indicates that power is empty)
1.3.6.1.4.1.890.1.5.12.49.17.5.2Nodexdsl2PMExtended
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1Nodexdsl2PMLineExtended
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1Tablexdsl2PMLineCurrExtendedTablenot-accessiblecurrentThe table xdsl2PMLineCurrExtendedTable contains current Performance Monitoring results for DSL lines.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1Rowxdsl2PMLineCurrExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of vdsl2(251). A second index of this table is the termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1.1Columnxdsl2PMLCurrUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1.2Columnxdsl2PMLCurr15MLofsread-onlycurrentCount of seconds during this interval that there was Loss of Frame.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1.3Columnxdsl2PMLCurr1DayLofsread-onlycurrentCount of seconds during this interval that there was Loss of Frame.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2Tablexdsl2PMLineInitCurrExtendedTablenot-accessiblecurrentThe table xdsl2PMLineInitCurrExtendedTable contains current Performance Monitoring results for DSL lines.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1Rowxdsl2PMLineInitCurrExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of vdsl2(251).
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.1Columnxdsl2PMLInitCurr15MLolsread-onlycurrentCount of seconds during this interval that there was Loss of Link.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.2Columnxdsl2PMLInitCurr15MLolread-onlycurrentCount of times for Loss of Link during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.3Columnxdsl2PMLInitCurr15MLprsread-onlycurrentCount of seconds during this interval that there was Loss of Power.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.4Columnxdsl2PMLInitCurr15MLprread-onlycurrentCount of times for Loss of Power during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.5Columnxdsl2PMLInitCurr1DayLolsread-onlycurrentCount of seconds during this interval that there was Loss of Link.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.6Columnxdsl2PMLInitCurr1DayLolread-onlycurrentCount of times for Loss of Link during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.7Columnxdsl2PMLInitCurr1DayLprsread-onlycurrentCount of seconds during this interval that there was Loss of Power.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.8Columnxdsl2PMLInitCurr1DayLprread-onlycurrentCount of times for Loss of Power during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3Tablexdsl2PMLineHist15MinExtendedTablenot-accessiblecurrentThe table xdsl2PMLineHist15MinExtendedTable contains PM line history for 15-minute intervals of DSL line.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1Rowxdsl2PMLineHist15MinExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of vdsl2(251). A second index of this table is the transmission unit. The third…
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1.1Columnxdsl2PMLHist15MUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1.2Columnxdsl2PMLHist15MIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1.3Columnxdsl2PMLHist15MLofsread-onlycurrentCount of seconds during this interval that there was Loss of Frame.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4Tablexdsl2PMLineHist1DayExtendedTablenot-accessiblecurrentThe table xdsl2PMLineHist1DayExtendedTable contains PM line history for 1 day intervals of DSL line.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1Rowxdsl2PMLineHist1DayExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of vdsl2(251). A second index of this table is the transmission unit. The third…
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1.1Columnxdsl2PMLHist1DUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1.2Columnxdsl2PMLHist1DIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1.3Columnxdsl2PMLHist1DLofsread-onlycurrentCount of seconds during this interval that there was Loss of Frame.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5Tablexdsl2PMLineInitHist15MinExtendedTablenot-accessiblecurrentThe table xdsl2PMLineInitHist15MinExtendedTable contains PM line history for 15-minute intervals of DSL line.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1Rowxdsl2PMLineInitHist15MinExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of vdsl2(251). A second index is the interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.1Columnxdsl2PMLInitHist15MIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.2Columnxdsl2PMLInitHist15MLolsread-onlycurrentCount of seconds during this interval that there was Loss of Link.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.3Columnxdsl2PMLInitHist15MLolread-onlycurrentCount of times for Loss of Link during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.4Columnxdsl2PMLInitHist15MLprsread-onlycurrentCount of seconds during this interval that there was Loss of Power.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.5Columnxdsl2PMLInitHist15MLprread-onlycurrentCount of times for Loss of Power during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6Tablexdsl2PMLineInitHist1DayExtendedTablenot-accessiblecurrentThe table xdsl2PMLineInitHist1DayExtendedTable contains PM line history for 1 day intervals of DSL line.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1Rowxdsl2PMLineInitHist1DayExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of vdsl2(251). A second index is the interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.1Columnxdsl2PMLInitHist1DIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.2Columnxdsl2PMLInitHist1DLolsread-onlycurrentCount of seconds during this interval that there was Loss of Link.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.3Columnxdsl2PMLInitHist1DLolread-onlycurrentCount of times for Loss of Link during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.4Columnxdsl2PMLInitHist1DLprsread-onlycurrentCount of seconds during this interval that there was Loss of Power.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.5Columnxdsl2PMLInitHist1DLprread-onlycurrentCount of times for Loss of Power during this interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2Nodexdsl2PMChannelExtended
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1Tablexdsl2PMChCurrExtendedTablenot-accessiblecurrentThe table xdsl2PMChCurrExtendedTable contains current Performance Monitoring results for DSL channels.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1Rowxdsl2PMChCurrExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of a DSL channel. A second index of this table is the termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1.1Columnxdsl2PMChCurrUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1.2Columnxdsl2PMChCurr15MUncorrectBlocksread-onlycurrentCount of all blocks received with uncorrectable errors in the channel within the current 15 minute interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1.3Columnxdsl2PMChCurr1DayUncorrectBlocksread-onlycurrentCount of all blocks received with uncorrectable errors in the channel during the interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2Tablexdsl2PMChHist15MinExtendedTablenot-accessiblecurrentThe extended table xdsl2PMChHist15MinTable contains Performance Monitoring (PM) history for 15-minute intervals for DSL channels PM.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1Rowxdsl2PMChHist15MinExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of a DSL channel. A second index of this table is the transmission unit. The th…
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1.1Columnxdsl2PMChHist15MUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1.2Columnxdsl2PMChHist15MIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1.3Columnxdsl2PMChHist15MUncorrectBlocksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel within the history 15 minute interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3Tablexdsl2PMChHist1DExtendedTablenot-accessiblecurrentThe extended table xdsl2PMChHist1DTable contains Performance Monitoring (PM) history for 1 day intervals for DSL channels PM.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1Rowxdsl2PMChHist1DExtendedEntrynot-accessiblecurrentOne index of this table is an interface index where the interface has an ifType of a DSL channel. A second index of this table is the transmission unit. The th…
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1.1Columnxdsl2PMChHist1DUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1.2Columnxdsl2PMChHist1DIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1.3Columnxdsl2PMChHist1DUncorrectBlocksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel within the history 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.17.5.3Tablexdsl2LineStatusTablenot-accessiblecurrentThis table shows line status.
1.3.6.1.4.1.890.1.5.12.49.17.5.3.1Rowxdsl2LineStatusEntrynot-accessiblecurrentAn entry of xdsl2LineStatusTable.
1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.1Columnxdsl2LineStatusread-onlycurrentXdsl line status.
1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.2Columnxdsl2LineProtocolread-onlycurrentXdsl line protocol.
1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.3Columnxdsl2LineUptimeread-onlycurrentXdsl line uptime. The unit is second.
1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.4Columnxdsl2LineTxRateread-onlycurrentXdsl line tx rate.
1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.5Columnxdsl2LineRxRateread-onlycurrentXdsl line rx rate.
1.3.6.1.4.1.890.1.5.12.49.17.8Nodeldm
1.3.6.1.4.1.890.1.5.12.49.17.8.1Nodexdsl2ExtendedStatus
1.3.6.1.4.1.890.1.5.12.49.17.8.1.1Tablexdsl2ExtendedSCStatusTablenot-accessiblecurrentThe table xdsl2ExtendedSCStatusTable extends xdsl2SCStatusTable for Zyxel product.
1.3.6.1.4.1.890.1.5.12.49.17.8.1.1.1Rowxdsl2ExtendedSCStatusEntrynot-accessiblecurrentThe table xdsl2ExtendedSCStatusTable contains extra subcarrier status parameters besides those in xdsl2LineSegmentTable.
1.3.6.1.4.1.890.1.5.12.49.17.8.1.1.1.1Columnxdsl2SCStatusActAtpread-onlycurrentActual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement…
1.3.6.1.4.1.890.1.5.12.49.17.8.1.2Tablexdsl2ExtendedSCStatusBandTablenot-accessiblecurrentThe table xdsl2ExtendedSCStatusBandTable extends xdsl2SCStatusBandTable for Zyxel product.
1.3.6.1.4.1.890.1.5.12.49.17.8.1.2.1Rowxdsl2ExtendedSCStatusBandEntrynot-accessiblecurrentThe table xdsl2ExtendedSCStatusBandTable contains extra subcarrier status parameters that are grouped per-band besides those in xdsl2SCStatusBandTable.
1.3.6.1.4.1.890.1.5.12.49.17.8.1.2.1.1Columnxdsl2SCStatusBandSnrMarginread-onlycurrentSNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstr…
1.3.6.1.4.1.890.1.5.12.49.17.9TableforcePortSettingTablenot-accessiblecurrentThis table includes force port settings for the port.
1.3.6.1.4.1.890.1.5.12.49.17.9.1RowforcePortSettingEntrynot-accessiblecurrentAn entry in forcePortSettingTable.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.1ColumnforcePortTransTyperead-writecurrentConfigures allowed transmission type. The setting is undefined and system takes settings for transmission type, Annex M, L, I, J, power management, and TX powe…
1.3.6.1.4.1.890.1.5.12.49.17.9.1.2ColumnforcePortAnnexMread-writecurrentEnable/Disable Annex M. This is ADSL specific setting.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.3ColumnforcePortAnnexLread-writecurrentEnable/Disable Annex L. This is ADSL specific setting.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.4ColumnforcePortAnnexIread-writecurrentEnable/Disable Annex I. This is ADSL specific setting.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.5ColumnforcePortAnnexJread-writecurrentEnable/Disable Annex J. This is ADSL specific setting.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.6ColumnforcePortPmModeread-writecurrentConfigures Power Management operating mode. (used for ADSL2 and ADSL2+ protocol) disable: disable power management. allowL3: dsl could autonomously transmit to…
1.3.6.1.4.1.890.1.5.12.49.17.9.1.7ColumnforcePortL0Timeread-writecurrentConfigures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is seconds.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.8ColumnforcePortL2Timeread-writecurrentConfigures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is seconds.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.9ColumnforcePortL2PwrDnStepread-writecurrentConfigures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is dB.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.10ColumnforcePortL2PwrDnMaxread-writecurrentConfigures Power Management parameters (used for ADSL2 and ADSL2+ protocol). The unit is dB.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.11ColumnforcePortTxPwrModeread-writecurrentConfigures TX Power Mode. fix: Fix to maximum of rate. power: priority to power. rate: priority to rate.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.12ColumnforcePortMinInpDsread-writecurrentConfigure downstream minimum INP for 4.3125KHz carrier space DSL link. The unit is 0.5 symbol.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.13ColumnforcePortMinInpUsread-writecurrentConfigure upstream minimum INP for 4.3125KHz carrier space DSL link. The unit is 0.5 symbol.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.14ColumnforcePortMaxUsTxPwrread-writecurrentConfigure maximum upstream allowed transmit power. The unit is 0.1 dBm.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.15ColumnforcePortMaxDsTxPwrread-writecurrentConfigure maximum downstream allowed transmit power. The unit is 0.1 dBm.
1.3.6.1.4.1.890.1.5.12.49.17.9.1.16ColumnforcePortMaxUsRxPwrread-writecurrentConfigure maximum aggregate receive power at the ATU-C. The unit is 0.1 dBm.
1.3.6.1.4.1.890.1.5.12.49.17.10NodexdslBonding
1.3.6.1.4.1.890.1.5.12.49.17.10.1TablexdslBondingConfigTablenot-accessiblecurrentThis table contains information on the xdsl bonding configuration.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1RowxdslBondingConfigEntrynot-accessiblecurrentAn entry in xdslBondingConfigEntry.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.1ColumnxdslBondingConfigNameread-onlycurrentBonding group name.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.2ColumnxdslBondingConfigActiveread-createcurrentActive bonding.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.3ColumnxdslBondingConfigMemberPortread-createcurrentSet bonding port-list.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.4ColumnxdslBondingConfigModeread-createcurrentSet adsl/vdsl protocol.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.5ColumnxdslBongingConfigLineTempread-createcurrentConfigures the referenced DSL line template.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.6ColumnxdslBondingConfigFallbackTempread-createcurrentConfigures the referenced DSL fallback template.
1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.7ColumnxdslBondingConfigRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.17.10.2TablexdslBondingStatusTablenot-accessiblecurrentThis table contains information on the xdsl bonding status.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1RowxdslBondingStatusEntrynot-accessiblecurrentAn entry in xdslBondingStatusEntry.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.1ColumnxdslBondingStatusNameread-onlycurrentThe name of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.2ColumnxdslBondingStatusActiveread-onlycurrentThe status of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.3ColumnxdslBondingStatusMemberPortread-onlycurrentThe member port of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.4ColumnxdslBondingStatusActivePortread-onlycurrentThe active port of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.5ColumnxdslBondingStatusMainPortread-onlycurrentThe main port of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.6ColumnxdslBondingStatusTransferModeread-onlycurrentThe transfer mode of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.7ColumnxdslBondingStatusRateUsread-onlycurrentThe Us group rate of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.8ColumnxdslBondingStatusRateDsread-onlycurrentThe Ds group rate of the bonding group.
1.3.6.1.4.1.890.1.5.12.49.17.10.3NodexdslBondingCounterOps
1.3.6.1.4.1.890.1.5.12.49.17.10.3.1ScalarxdslBondingCounterTargetread-writecurrentTarget XDSL bonding group name to clear counter statistics.
1.3.6.1.4.1.890.1.5.12.49.17.10.3.2ScalarxdslBondingCounterOperationread-writecurrentclearCurrentCounter: Clear current counter on the target XDSL bonding group name specified by xdslBondingCounterTarget. clear15MinCounter: Clear 15 minutes cou…
1.3.6.1.4.1.890.1.5.12.49.18Nodevoip
1.3.6.1.4.1.890.1.5.12.49.18.1Nodemlt
1.3.6.1.4.1.890.1.5.12.49.18.1.1ScalarmltTargetread-writecurrentIfIndex of the port, telephone number, account and termination ID which would be performed Metallic Link Test.
1.3.6.1.4.1.890.1.5.12.49.18.1.2ScalarmltOptionread-writecurrentEach bit corresponds to a test item. The various bit positions are: Bit 0: vac, test AC voltage Bit 1: vdctest, DC voltage Bit 2: rload, test load resistance B…
1.3.6.1.4.1.890.1.5.12.49.18.1.3ScalarmltForceread-writecurrentForce test even when the port is in-use.
1.3.6.1.4.1.890.1.5.12.49.18.1.4ScalarmltOpsread-writecurrentThe manager sets the object to 1 to start the mlt, sets the object to 2 to clears mlt result and the agent clears the object to zero when mlt is successfully c…
1.3.6.1.4.1.890.1.5.12.49.18.1.5TablemltResultTablenot-accessiblecurrentmlt result
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1RowmltResultEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.1ColumnmltVacTipread-onlycurrentAC voltage between TIP and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.2ColumnmltVacRingread-onlycurrentAC voltage between RING and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the tes…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.3ColumnmltVacDiffread-onlycurrentAC voltage between TIP and RING. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test w…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.4ColumnmltVdcTipread-onlycurrentDC voltage between TIP and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.5ColumnmltVdcRingread-onlycurrentDC voltage between RING and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the tes…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.6ColumnmltVdcDiffread-onlycurrentDC voltage between TIP and RING. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test w…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.7ColumnmltRLoopread-onlycurrentLoop Resistance. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enab…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.8ColumnmltRtgread-onlycurrentResistance between TIP and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.9ColumnmltRrgread-onlycurrentResistance between RING and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the tes…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.10ColumnmltRtrread-onlycurrentResistance between TIP and RING. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test w…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.11ColumnmltCtgread-onlycurrentCapacitance between TIP and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the tes…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.12ColumnmltCrgread-onlycurrentCapacitance between RING and GROUND. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the te…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.13ColumnmltCtrread-onlycurrentCapacitance between TIP and RING. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test …
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.14ColumnmltRenread-onlycurrentREN(ring equivalent number). [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when …
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.15ColumnmltVRingread-onlycurrentRing voltage. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.16ColumnmltVMeteringread-onlycurrentMetering pulse voltage. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port …
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.17ColumnmltDialToneDetectedread-onlycurrentWhether dial tone is detected.
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.18ColumnmltDetectedDtmfCountread-onlycurrentNumber of DTMF tone detected. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.19ColumnmltDialToneDelayread-onlycurrentDail tone delay between played out and detected. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't …
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.20ColumnmltReceiverOffHookread-onlycurrentReceiver off-hook test. [Normal Value]: 1 : On hook. 2 : Off hook. 3 : circuit short or fault. 4 : circuit open. [Special value]: 250000016 : No result. 250000…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.21ColumnmltLoopRloadread-onlycurrentLoop resistance. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enab…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.22ColumnmltLoopIMetallicread-onlycurrentMetallic current. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is ena…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.23ColumnmltLoopVABread-onlycurrentSensed AB voltage. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is en…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.24ColumnmltLoopVBLread-onlycurrentLow battery voltage. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is …
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.25ColumnmltLoopVBHread-onlycurrentHigh battery voltage. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is…
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.26ColumnmltRrevread-onlycurrentReverse polarity Resistance. [Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when …
1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.27ColumnmltDetectedDtmfDigitread-onlycurrentdigit of DTMF tone detected.
1.3.6.1.4.1.890.1.5.12.49.18.1.6ScalarmltOpsErrMsgread-onlycurrentThe error message when fail to start MLT test.
1.3.6.1.4.1.890.1.5.12.49.18.1.7ScalarmltTargetTyperead-writecurrentType of the target which would be performed Metallic Link Test.
1.3.6.1.4.1.890.1.5.12.49.18.2Nodeh248
1.3.6.1.4.1.890.1.5.12.49.18.2.1Nodeh248DigitMapTimeout
1.3.6.1.4.1.890.1.5.12.49.18.2.1.1Scalarh248DigitStartTimeoutread-writecurrentConfigures digit collection strat timeout.
1.3.6.1.4.1.890.1.5.12.49.18.2.1.2Scalarh248DigitShortTimeoutread-writecurrentConfigures digit collection short timeout.
1.3.6.1.4.1.890.1.5.12.49.18.2.1.3Scalarh248DigitLongTimeoutread-writecurrentConfigures digit collection long timeout.
1.3.6.1.4.1.890.1.5.12.49.18.2.2Scalarh248Dscpread-writecurrentConfigures DSCP value carried on H.248 packets.
1.3.6.1.4.1.890.1.5.12.49.18.2.3Scalarh248Encoderead-writecurrentConfigures text encoding type of the H.248 message sent out.
1.3.6.1.4.1.890.1.5.12.49.18.2.4Scalarh248InactivityTimerread-writecurrentConfigures the inactivity timeout MG, MG will send out notify if there is no further commnication between MG-MGC in the configured timeout. 0 to disable this f…
1.3.6.1.4.1.890.1.5.12.49.18.2.5Nodeh248Mg
1.3.6.1.4.1.890.1.5.12.49.18.2.5.1Scalarh248MgEnableread-writecurrentEnable/disable H.248 MG function.
1.3.6.1.4.1.890.1.5.12.49.18.2.5.2Scalarh248MgNameread-writecurrentConfigures H.248 MG name.
1.3.6.1.4.1.890.1.5.12.49.18.2.5.3Scalarh248MgPortread-writecurrentConfigures H.248 MG TCP/UDP port.
1.3.6.1.4.1.890.1.5.12.49.18.2.5.4Scalarh248MgStateread-onlycurrentH.248 MG State.
1.3.6.1.4.1.890.1.5.12.49.18.2.6Nodeh248Mgc
1.3.6.1.4.1.890.1.5.12.49.18.2.6.1Scalarh248MgcIpDnread-writecurrentConfigures H.248 primary MGC IP address/domain name.
1.3.6.1.4.1.890.1.5.12.49.18.2.6.2Scalarh248MgcPortread-writecurrentConfigures H.248 primay MGC TCP/UDP port.
1.3.6.1.4.1.890.1.5.12.49.18.2.6.3Scalarh248Mgc2Enableread-writecurrentEnable/disable secondary MGC.
1.3.6.1.4.1.890.1.5.12.49.18.2.6.4Scalarh248Mgc2IpDnread-writecurrentConfigures H.248 secondary MGC IP address/domain name.
1.3.6.1.4.1.890.1.5.12.49.18.2.6.5Scalarh248Mgc2Portread-writecurrentConfigures H.248 secondary MGC TCP/UDP port.
1.3.6.1.4.1.890.1.5.12.49.18.2.8Nodeh248RetransmitTime
1.3.6.1.4.1.890.1.5.12.49.18.2.8.1Scalarh248RetransmitInitTimeread-writecurrentInitial retransmit timer is used when MG didn't establish control link between MG-MGC during this enable time.
1.3.6.1.4.1.890.1.5.12.49.18.2.8.2Scalarh248RetransmitMinTimeread-writecurrentMinimum retransmit timer is used for mininum retransmit time.
1.3.6.1.4.1.890.1.5.12.49.18.2.8.3Scalarh248RetransmitMaxTimeread-writecurrentMaximum retrnamit timer is used for maximum retransmit time.
1.3.6.1.4.1.890.1.5.12.49.18.2.8.4Scalarh248RetransmitWindowread-writecurrentRetransmit window is used for overall retransmit time.
1.3.6.1.4.1.890.1.5.12.49.18.2.9Nodeh248Rfc2833
1.3.6.1.4.1.890.1.5.12.49.18.2.9.1Scalarh248Rfc2833Enableread-writecurrentEnable/disable RFC2833 DTMF relay when MGC allowed.
1.3.6.1.4.1.890.1.5.12.49.18.2.9.2Scalarh248Rfc2833Ptyperead-writecurrentConfigures RFC2833 payload type used for DTMF relay. This field won't be available when RFC2833 is enabled.
1.3.6.1.4.1.890.1.5.12.49.18.2.10Scalarh248RtpStartPortread-writecurrentConfigures UDP port range used by RTP packets.
1.3.6.1.4.1.890.1.5.12.49.18.2.11Scalarh248RtpEndPortread-writecurrentConfigures UDP port range used by RTP packets.
1.3.6.1.4.1.890.1.5.12.49.18.2.12Scalarh248SoftSwitchread-writecurrentConfigures special call flows to Interop with special MGC. DEFVAL: the default call flow zxss10-ss: special call flow for ZTE zxss10 huawei-soft3000: special c…
1.3.6.1.4.1.890.1.5.12.49.18.2.13Scalarh248T38Enableread-writecurrentEnable/disable T.38 FAX when MGC allowed.
1.3.6.1.4.1.890.1.5.12.49.18.2.14Scalarh248Transportread-writecurrentConfigures transport protocol for H.248.
1.3.6.1.4.1.890.1.5.12.49.18.2.15Scalarh248VbdEnableread-writecurrentEnable/disable Voice Band Data service when MGC allowed.
1.3.6.1.4.1.890.1.5.12.49.18.2.16Nodeh248RtpTerminatetId
1.3.6.1.4.1.890.1.5.12.49.18.2.16.1Scalarh248RtpTerminateIdPrefixread-writecurrentConfigures RTP termination ID prefix.
1.3.6.1.4.1.890.1.5.12.49.18.2.16.2Scalarh248RtpTerminateIdSuffixStartNumberread-writecurrentConfigures RTP termination ID suffix start number.
1.3.6.1.4.1.890.1.5.12.49.18.2.16.3Scalarh248RtpTerminateIdSuffixLenread-writecurrentConfigures RTP termination ID suffix length. If the suffix length is smaller or equal to the start number, there won't be zero pedding to the id.
1.3.6.1.4.1.890.1.5.12.49.18.2.17Scalarh248ForceVerEnableread-writecurrentEnable: force using H.248 version 1 Disable: allow using H.248 version 1 and 2
1.3.6.1.4.1.890.1.5.12.49.18.2.18Scalarh248RegisterRetryread-writecurrentConfigures voip H.248 register retry timer in minutes. 0 to disable function.
1.3.6.1.4.1.890.1.5.12.49.18.3NodevoipIp
1.3.6.1.4.1.890.1.5.12.49.18.3.1ScalarvoipIpAddressread-writecurrentConfigures VoIP interface IP address(1.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.18.3.2ScalarvoipIpNetmaskread-writecurrentConfigures VoIP interface subnet mask.
1.3.6.1.4.1.890.1.5.12.49.18.3.3ScalarvoipIpVlanIdread-writecurrentConfigures VoIP interface VLAN ID.
1.3.6.1.4.1.890.1.5.12.49.18.3.4ScalarvoipIpDefaultGatewayread-writecurrentConfigures default gateway of VoIP interface(1.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.18.3.5ScalarvoipIpDnsread-writecurrentConfigures DNS server of VoIP interface(0.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.18.3.6ScalarvoipIpDhcpBootpEnableread-writecurrentEnable DHCP client to VoIP interface. disable(2) is only for status display.
1.3.6.1.4.1.890.1.5.12.49.18.3.7ScalarvoipIpDhcpOperationread-writecurrentPerforms DHCP operations on VoIP interface. release: release dynamic IP address renew: renew dynamic IP address
1.3.6.1.4.1.890.1.5.12.49.18.3.8ScalarvoipIpPbitread-writecurrentConfigures PBIT value carried on H.248 packets.
1.3.6.1.4.1.890.1.5.12.49.18.3.9ScalarvoipIpDns2read-writecurrentConfigures the secondary DNS server of VoIP interface(0.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.18.3.10ScalarvoipIpDns3read-writecurrentConfigures the third DNS server of VoIP interface(0.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.18.4NodevoipPots
1.3.6.1.4.1.890.1.5.12.49.18.4.1ScalarvoipPotsHookFlashTimeEnableread-writecurrentEnable/disable system-wised POTS parameters.
1.3.6.1.4.1.890.1.5.12.49.18.4.2ScalarvoipPotsHookFlashMaxTimeread-writecurrentConfigures hook flash detection max time threshold. This value should be larger than voipPotsHookFlashMinTime
1.3.6.1.4.1.890.1.5.12.49.18.4.3ScalarvoipPotsHookFlashMinTimeread-writecurrentConfigures hook flash detection min time threshold. This value should be smaller than voipPotsHookFlashMaxTime
1.3.6.1.4.1.890.1.5.12.49.18.4.4ScalarvoipPotsOffHookTimeEnableread-writecurrentSet the value to disable to use the value defined in the current selected country code.
1.3.6.1.4.1.890.1.5.12.49.18.4.5ScalarvoipPotsOffHookTimeread-writecurrentConfigures off-hook detection time threshold.
1.3.6.1.4.1.890.1.5.12.49.18.4.6TablevoipPotsRingTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1RowvoipPotsRingEntrynot-accessiblecurrentAn entry in voipPotsRingEntry.
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.1ColumnvoipPotsRingIndexread-onlycurrentindex
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.2ColumnvoipPotsRingNameread-writecurrentname
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.3ColumnvoipPotsRingOn1read-writecurrentfirst on time
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.4ColumnvoipPotsRingOff1read-writecurrentfirst off time
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.5ColumnvoipPotsRingOn2read-writecurrentsecond on time
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.6ColumnvoipPotsRingOff2read-writecurrentsecond off time
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.7ColumnvoipPotsRingOn3read-writecurrentthird on time
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.8ColumnvoipPotsRingOff3read-writecurrentthird off time
1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.9ColumnvoipPotsRingSetDefaultread-writecurrentSet default value.
1.3.6.1.4.1.890.1.5.12.49.18.5ScalarvoipCountryCoderead-writecurrentConfigure country code for predfinded VOIP parameters. <country-code>: 0: USA 23: Germany 1: Japan 24: Greece 2: Taiwan 25: Australia 3: Austria 26: New_zealan…
1.3.6.1.4.1.890.1.5.12.49.18.6ScalarvoipMaxNumOfDspProfilesread-onlycurrentThe maximum number of VoIP DSP profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.18.7TablevoipDspProfileTablenot-accessiblecurrentConfigures specified VoIP DSP profile.
1.3.6.1.4.1.890.1.5.12.49.18.7.1RowvoipDspProfileEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.18.7.1.1ColumnvoipDspProfileNameread-onlycurrentProfile name
1.3.6.1.4.1.890.1.5.12.49.18.7.1.2ColumnvoipDspProfileCodecread-createcurrent0x01: g711a 0x02: g711mu 0x03: g723 0x04: g726x16 0x05: g726x24 0x06: g726x32 0x07: g726x40 0x08: g729ab the value of dspProfileCodec is OCTET STRING, there ar…
1.3.6.1.4.1.890.1.5.12.49.18.7.1.3ColumnvoipDspProfileDscpread-createcurrentConfigures DSCP value carried on the RTP packets for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.4ColumnvoipDspProfileEchoTailread-createcurrentConfigures echo cancellation echo tail length for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.5ColumnvoipDspProfileEchoCancelEnableread-createcurrentEnable/disable echo cancellation for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.6ColumnvoipDspProfileG711Vpiread-createcurrentConfigures voice packet interval for G.711 codec for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.7ColumnvoipDspProfileG723Vpiread-createcurrentConfigures voice packet interval for G.723 codec for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.8ColumnvoipDspProfileG726Vpiread-createcurrentConfigures voice packet interval for G.726 codec for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.9ColumnvoipDspProfileG729Vpiread-createcurrentConfigures voice packet interval for G.729 codec for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.10ColumnvoipDspProfilePbitread-createcurrentConfigures PBIT value carried on the RTP packets for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.11ColumnvoipDspProfilePlayBufferMinDelayread-createcurrentConfigures voice play out buffer depth for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.12ColumnvoipDspProfilePlayBufferMaxDelayread-createcurrentConfigures voice play out buffer depth for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.13ColumnvoipDspProfileVadEnableread-createcurrentEnable/disable Voice Activity Detection for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.7.1.14ColumnvoipDspProfileRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.18.8TablevoipPortConfTablenot-accessiblecurrentConfigures VoIP port settings.
1.3.6.1.4.1.890.1.5.12.49.18.8.1RowvoipPortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.18.8.1.1ColumnvoipPortConfPortEnableread-writecurrentEnable/disable VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.2ColumnvoipPortConfDspProfileread-writecurrentConfigures VoIP DSP profile.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.3ColumnvoipPortConfVbdDspProfileread-writecurrentConfigures VoIP DSP profile for voice band data service.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.4ColumnvoipPortConfVbdDspProfileEnableread-writecurrentEnable/disable VoIP DSP profile for voice band data service.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.5ColumnvoipPortConfPotsBatteryread-writecurrentcontrols the battery supply of a port, low battery is for short loop, high and boost battery for long loop.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.6ColumnvoipPortConfPotsTxGainread-writecurrentConfigures TX gain for voice band data service.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.7ColumnvoipPortConfPotsRxGainread-writecurrentConfigures RX gain for voice band data service.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.8ColumnvoipPortConfVoiceTxGainread-writecurrentConfigures TX gain for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.9ColumnvoipPortConfVoiceRxGainread-writecurrentConfigures RX gain for normal voice service.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.10ColumnvoipPortConfPotsImpedanceread-writecurrentConfigures POTS impadence.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.11ColumnvoipPortConfPotsImpedanceEnableread-writecurrentenable(1) : use the impedance value configured in voipPortConfPotsImpedance. disable(2): use the impedance value defined in the current selected country code.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.12ColumnvoipPortConfH248TerminateIdread-writecurrentConfigures H.248 physical termination ID.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.13ColumnvoipPortConfPmThreshProfileread-writecurrentConfigures alarm threshold profile for PM.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.14ColumnvoipPortConfPotsTaxread-writecurrentConfigures POTS taxing mechanism. disable: disable the tax function.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.16ColumnvoipPortConfPotsLoopCurrentread-writecurrentConfigures the loopcurrent of a port. Default is 18 mA.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.17ColumnvoipPortConfTelread-writecurrentVoIP's telephone number of the specified port.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.18ColumnvoipPortConfNameread-writecurrentVoIP's name of the specified port.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.20ColumnvoipPortConfSipCallSvcProfileread-writecurrentSIP call service profile name.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.22ColumnvoipPortConfHotlineread-writecurrentEnable/disable hotline.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.23ColumnvoipPortConfHotlineTelread-writecurrentThe telephone number of hotline for the specified port.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.24ColumnvoipPortConfHotlineTimeoutread-writecurrentThe interval before dialing the hotline number.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.25ColumnvoipPortConfAccountread-writecurrentThe account for SIP registration of the specified port.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.26ColumnvoipPortConfSipProfileread-writecurrentSIP profile name.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.27ColumnvoipPortConfPasswordread-writecurrentThe password for SIP registration of the specified port. Can input with plain text or ciphertext. plain text: Up to 31 printable characters. ciphertext: 95 cha…
1.3.6.1.4.1.890.1.5.12.49.18.8.1.28ColumnvoipPortConfPotsLoopResistanceread-writecurrentConfigures the loop resistance (2600 ohm/3200 ohm)of a port. Default is 2600 ohm.
1.3.6.1.4.1.890.1.5.12.49.18.8.1.29ColumnvoipPortConfPotsCidAsTyperead-writecurrentConfigures the CID AS type of a port. Default value is DEFVAL(0).
1.3.6.1.4.1.890.1.5.12.49.18.8.1.30ColumnvoipPortConfPotsCidPayloadTyperead-writecurrentConfigures the CID payload type of a port. Default value is DEFVAL(0).
1.3.6.1.4.1.890.1.5.12.49.18.8.1.41ColumnvoipPortConfPotsVmwiFormatread-writecurrentConfigures the VMWI format of a port. Default value is FSK(0).
1.3.6.1.4.1.890.1.5.12.49.18.8.1.42ColumnvoipPortConfPotsHookFlashMaxTimeread-writecurrentConfigures hook flash detection max time threshold. This value should be larger than voipPortConfPotsHookFlashMinTime
1.3.6.1.4.1.890.1.5.12.49.18.8.1.43ColumnvoipPortConfPotsHookFlashMinTimeread-writecurrentConfigures hook flash detection min time threshold. This value should be smaller than voipPortConfPotsHookFlashMaxTime
1.3.6.1.4.1.890.1.5.12.49.18.9TablevoipPortStatisticTablenot-accessiblecurrentShow the statistics for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1RowvoipPortStatisticEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.18.9.1.1ColumnvoipPortStatisticCurrCallTimeread-onlycurrentShow the statistic of current call time for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.2ColumnvoipPortStatisticTotalCallTimeread-onlycurrentShow the statistic of total call time for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.3ColumnvoipPortStatisticCallTimesread-onlycurrentShow the statistic of call times for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.4ColumnvoipPortStatisticTxRateread-onlycurrentShow the statistic of Transmission rate(bps) for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.5ColumnvoipPortStatisticRxRateread-onlycurrentShow the statistic of Reception rate(bps) for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.6ColumnvoipPortStatisticTxPktCntread-onlycurrentShow the statistic of Transmission packet count for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.7ColumnvoipPortStatisticRxPktCntread-onlycurrentShow the statistic of Reception packet count for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.8ColumnvoipPortStatisticTxFracLostread-onlycurrentShow the statistic of Transmission fraction lost packet percentage(10^(-6) %) for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.9ColumnvoipPortStatisticRxFracLostread-onlycurrentShow the statistic of Reception fraction lost packet percentage(10^(-6) %) for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.10ColumnvoipPortStatisticTxJitterread-onlycurrentShow the statistic of Transmission Jitter in 0.001 ms for the VoIP port. For example, 1 means 0.001 ms and 1000 means 1 ms.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.11ColumnvoipPortStatisticRxJitterread-onlycurrentShow the statistic of Reception Jitter in 0.001 ms for the VoIP port. For example, 1 means 0.001 ms and 1000 means 1 ms.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.12ColumnvoipPortStatisticTxAvgDelayread-onlycurrentShow the statistic of Transmission average delay(ms) for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.9.1.13ColumnvoipPortStatisticRxAvgDelayread-onlycurrentShow the statistic of Reception average delay(ms) for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.10TablevoipPortLineStatusTablenot-accessiblecurrentShow line status(phone/service status) of VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.10.1RowvoipPortLineStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.18.10.1.1ColumnvoipPortLineStatusPhoneStatusread-onlycurrentShow the the phone status for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.10.1.2ColumnvoipPortLineStatusServiceStatusread-onlycurrentShow the the service status for the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11TablevoipPortLineInfoTablenot-accessiblecurrentShow line infomation which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1RowvoipPortLineInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.18.11.1.1ColumnvoipPortLineInfoRtpTxCodecTyperead-onlycurrentShow line information of transmission codec which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1.2ColumnvoipPortLineInfoRtpRxCodecTyperead-onlycurrentShow line information of reception codec which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1.3ColumnvoipPortLineInfoRtpTxPtread-onlycurrentShow line information of transmission RTP payload type which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1.4ColumnvoipPortLineInfoRtpRxPtread-onlycurrentShow line information of reception RTP payload type which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1.5ColumnvoipPortLineInfoRtpLocalIpread-onlycurrentShow line information of RTP local ip address which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1.6ColumnvoipPortLineInfoRtpRemoteIpread-onlycurrentShow line information of RTP remote ip address which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1.7ColumnvoipPortLineInfoRtpLocalPortread-onlycurrentShow line information of RTP local port which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.11.1.8ColumnvoipPortLineInfoRtpRemotePortread-onlycurrentShow line information of RTP remote port which is used currently by the VoIP port.
1.3.6.1.4.1.890.1.5.12.49.18.12NodevoipOps
1.3.6.1.4.1.890.1.5.12.49.18.12.1ScalarvoipTargetread-writecurrentSpecifies target ifindex for voipOperation.
1.3.6.1.4.1.890.1.5.12.49.18.12.2ScalarvoipClearOperationread-writecurrentclear VoIP statistics. clearControlPacketStastistics(1) - clear H.248 control packet statistics. clearPortCallStatistics(2) - clear call statistics on specifie…
1.3.6.1.4.1.890.1.5.12.49.18.13NodevoipRtpIp
1.3.6.1.4.1.890.1.5.12.49.18.13.1ScalarvoipRtpIpAddressread-writecurrentConfigures VoIP RTP interface IP address(1.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.18.13.2ScalarvoipRtpIpNetmaskread-writecurrentConfigures VoIP RTP interface subnet mask.
1.3.6.1.4.1.890.1.5.12.49.18.13.3ScalarvoipRtpIpVlanIdread-writecurrentConfigures VoIP RTP interface VLAN ID.
1.3.6.1.4.1.890.1.5.12.49.18.13.4ScalarvoipRtpIpDefaultGatewayread-writecurrentConfigures default gateway of VoIP RTP interface(1.0.0.0 ~ 223.255.255.255).
1.3.6.1.4.1.890.1.5.12.49.18.13.6ScalarvoipRtpIpDhcpBootpEnableread-writecurrentEnable DHCP client to VoIP RTP interface. disable(2) is only for status display.
1.3.6.1.4.1.890.1.5.12.49.18.13.7ScalarvoipRtpIpDhcpOperationread-writecurrentPerforms DHCP operations on VoIP RTP interface. release: release dynamic IP address renew: renew dynamic IP address
1.3.6.1.4.1.890.1.5.12.49.18.13.8ScalarvoipRtpIpOperationread-writecurrentremoveAllRtpIpSettings: removes all RTP IP settings. Its value will be set to zero after operation finished.
1.3.6.1.4.1.890.1.5.12.49.18.13.9ScalarvoipRtpIpPbitread-writecurrentConfigures PBIT value carried on IP packets of RTP interface.
1.3.6.1.4.1.890.1.5.12.49.18.14NodevoipH248Statistic
1.3.6.1.4.1.890.1.5.12.49.18.14.1ScalarvoipH248StatisticMsgSentread-onlycurrentNumber of sent protocol message, include reset and error.
1.3.6.1.4.1.890.1.5.12.49.18.14.2ScalarvoipH248StatisticMsgRecvread-onlycurrentNumber of received message.
1.3.6.1.4.1.890.1.5.12.49.18.14.3ScalarvoipH248StatisticMsgLostread-onlycurrentNumber of message without reply.
1.3.6.1.4.1.890.1.5.12.49.18.14.4ScalarvoipH248StatisticMsgResentread-onlycurrentNumber of resent message.
1.3.6.1.4.1.890.1.5.12.49.18.14.5ScalarvoipH248StatisticErrorMsgread-onlycurrentNumber of error message sent.
1.3.6.1.4.1.890.1.5.12.49.18.14.6ScalarvoipH248StatisticUnIdentifiedMsgread-onlycurrentNumber of parse fail message.
1.3.6.1.4.1.890.1.5.12.49.18.20Nodesip
1.3.6.1.4.1.890.1.5.12.49.18.20.1ScalarmaxNumOfSipProfilesread-onlycurrentThe maximum number of SIP profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.18.20.2TablesipProfileTablenot-accessiblecurrentThis table includes SIP protocol related configuration.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1RowsipProfileEntrynot-accessiblecurrentAn entry in sipProfileTable.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.1ColumnsipProfileNameread-onlycurrentThis object is used by the SIP profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.2ColumnsipProfileSipSvrread-createcurrentIP used for SIP registration or SIP domain name.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.3ColumnsipProfileRegSvrread-createcurrentRegistration server IP or registration server domain name.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.4ColumnsipProfileProxySvrread-createcurrentProxy server IP or proxy server doamin name.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.5ColumnsipProfileSipPortread-createcurrentSIP UA port number.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.6ColumnsipProfileRegSvrPortread-createcurrentRegistration server port number.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.7ColumnsipProfileProxySvrPortread-createcurrentProxy server port number.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.8ColumnsipProfileUriTyperead-createcurrentConfigures the type of uri. sip(1), tel(2)
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.10ColumnsipProfileDscpread-createcurrentDSCP for SIP and RTP packet.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.11ColumnsipProfileKeepAliveread-createcurrentEnable or Disable keep alive feature of SIP
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.13ColumnsipProfilePrackread-createcurrentEnable or Disable the Provisional ACK feature of SIP
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.14ColumnsipProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.20ColumnsipProfileRtpStartPortread-createcurrentStart of RTP port number. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.21ColumnsipProfileRtpEndPortread-createcurrentEnd of RTP port number. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.27ColumnsipProfileSwitchTyperead-createcurrentConfigures the type of switch.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.28ColumnsipProfileKeepAliveTimeOutread-createcurrentKeep alive timeout of SIP, <timeout>: session expiration time in seconds, 90~65535
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.29ColumnsipProfileFailRetryread-createcurrent<FailRetry>: Register fail retry interval time in seconds, 120~900.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.30ColumnsipProfileRegTimeread-createcurrentRegistration expiration time in seconds, 120~65535.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.31ColumnsipProfileRegistrationread-createcurrentEnable or Disable registration feature of SIP
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.32ColumnsipProfileDnsSvrread-createcurrentEnable or Disable the server locating feature. on(1), off(2)
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.33ColumnsipProfileDualSvrread-createcurrentEnable or Disable the dual server feature. on(1), off(2)
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.34ColumnsipProfileSipSvr2read-createcurrentIP used for secondary SIP registration or secondary SIP domain name.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.35ColumnsipProfileRegSvr2read-createcurrentSecondary registration server IP or secondary registration server domain name.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.36ColumnsipProfileProxySvr2read-createcurrentSecondary proxy server IP or secondary proxy server doamin name.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.37ColumnsipProfileSipPort2read-createcurrentSecondary SIP UA port number.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.38ColumnsipProfileRegSvrPort2read-createcurrentSecondary registration server port number.
1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.39ColumnsipProfileProxySvrPort2read-createcurrentSecondary proxy server port number.
1.3.6.1.4.1.890.1.5.12.49.18.20.3ScalarmaxNumOfSipCallSvcProfilesread-onlycurrentThe maximum number of SIP call service profiles supported by the system.
1.3.6.1.4.1.890.1.5.12.49.18.20.4TablesipCallSvcProfileTablenot-accessiblecurrentThis table includes SIP call service related configuration.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1RowsipCallSvcProfileEntrynot-accessiblecurrentAn entry in sipCallSvcProfileTable.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.1ColumnsipCallSvcProfileNameread-onlycurrentThis object is used by the SIP call service profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.4ColumnsipCallSvcProfileDialPlanOnread-createcurrentEnable or Disable the dialplan feature.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.5ColumnsipCallSvcProfileDialPlanCcread-createcurrentCountry code, only digit 0..9 are allowed.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.6ColumnsipCallSvcProfileDialPlanNdcread-createcurrentNational destination code, only digit 0..9 are allowed.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.7ColumnsipCallSvcProfileDialPlanTableread-createcurrentDial plan table name.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.8ColumnsipCallSvcProfileStateMaskread-createcurrentBit 3 callwait : call waiting Bit 5 calltransfer : call transfer Bit 6 clip : caller line identification presentation (Caller ID) Bit 7 clir : caller line iden…
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.9ColumnsipCallSvcProfileDtmfread-createcurrentdtmf bypass : bypass DTMF tone dtmf rfc2833 : DTMF tone relay according to RFC2833 dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload …
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.10ColumnsipCallSvcProfileDtmfRfc2833PayloadTyperead-createcurrentRfc2833 payload type, if only set Dtmf as rfc2833, the default value is 101.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.11ColumnsipCallSvcProfileFaxread-createcurrentfax g711 : FAX service pass through by ITU-T G.711 fax t38 : FAX service by ITU-T T.38
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.12ColumnsipCallSvcProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.13ColumnsipCallSvcProfileKeypatternread-createcurrentKey pattern table name.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.15ColumnsipCallSvcProfileFlashread-createcurrentflash invite : send SIP INVITE message flash rfc2833 : flash relay according to RFC2833 flash rfc2833like : flash relay by SIP INFO message, but RFC2833 payloa…
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.16ColumnsipCallSvcProfileFlashPatternread-createcurrentFlash pattern name.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.18ColumnsipCallSvcProfileFirstDigitread-createcurrentfirst digit timeout. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.19ColumnsipCallSvcProfileInterDigitread-createcurrentinter digit timeout. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.20ColumnsipCallSvcProfileCentrexread-createcurrentEnable or Disable Centrex
1.3.6.1.4.1.890.1.5.12.49.18.20.8ScalarmaxNumOfSipDialPlanread-onlycurrentThe maximum number of SIP dial plan supported by the system.
1.3.6.1.4.1.890.1.5.12.49.18.20.12ScalarmaxNumOfSipKeyPatternread-onlycurrentThe maximum number of SIP key patterns supported by the system.
1.3.6.1.4.1.890.1.5.12.49.18.20.18TablesipDialPlanTablenot-accessiblecurrentConfigure specified dial plan table.
1.3.6.1.4.1.890.1.5.12.49.18.20.18.1RowsipDialPlanEntrynot-accessiblecurrentAn entry of sipDialPlanTable.
1.3.6.1.4.1.890.1.5.12.49.18.20.18.1.1ColumnsipDialPlanNameread-onlycurrentDial plan table name.
1.3.6.1.4.1.890.1.5.12.49.18.20.18.1.2ColumnsipDialPlanRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.12.49.18.20.19TablesipDialPlanContentTablenot-accessiblecurrentConfigure dial plan entry of specified index in specified payphone charging table.
1.3.6.1.4.1.890.1.5.12.49.18.20.19.1RowsipDialPlanContentEntrynot-accessiblecurrentAn entry of sipDialPlanContentTable.
1.3.6.1.4.1.890.1.5.12.49.18.20.19.1.1ColumnsipDialPlanIndexread-onlycurrentIndex of dial plan.
1.3.6.1.4.1.890.1.5.12.49.18.20.19.1.2ColumnsipDialPlanPatternread-writecurrentAllow digit, '*', and '#' characters and meaning characters that include 'x', '.', '|' and range format characters that include '~', ',' and parenthesis '(', '…
1.3.6.1.4.1.890.1.5.12.49.18.20.19.1.3ColumnsipDialPlanRuleread-writecurrentAllowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesi…
1.3.6.1.4.1.890.1.5.12.49.18.20.20TablesipKeyPatternTablenot-accessiblecurrentConfigure specified key pattern table.
1.3.6.1.4.1.890.1.5.12.49.18.20.20.1RowsipKeyPatternEntrynot-accessiblecurrentAn entry of sipKeyPatternTable.
1.3.6.1.4.1.890.1.5.12.49.18.20.20.1.1ColumnsipKeyPatternNameread-onlycurrentKey pattern table name.
1.3.6.1.4.1.890.1.5.12.49.18.20.20.1.2ColumnsipKeyPatternRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.12.49.18.20.21TablesipKeyPatternContentTablenot-accessiblecurrentConfigure key pattern related configuration.
1.3.6.1.4.1.890.1.5.12.49.18.20.21.1RowsipKeyPatternContentEntrynot-accessiblecurrentAn entry of sipKeyPatternContentTable.
1.3.6.1.4.1.890.1.5.12.49.18.20.21.1.1ColumnsipKeyPatternServiceTyperead-onlycurrentKey pattern service type.
1.3.6.1.4.1.890.1.5.12.49.18.20.21.1.2ColumnsipKeyPatternPatternread-writecurrentAllowed characters are 0~9, *, and #. Note: Pattern of callwaitdisconn, callwaitonhold and callwaitreject service types only allow 1 character
1.3.6.1.4.1.890.1.5.12.49.18.21NodevoipSIPStatistic
1.3.6.1.4.1.890.1.5.12.49.18.21.1ScalarvoipSIPStatisticMsgSentread-onlycurrentNumber of sent protocol message, include reset and error.
1.3.6.1.4.1.890.1.5.12.49.18.21.2ScalarvoipSIPStatisticMsgRecvread-onlycurrentNumber of received message.
1.3.6.1.4.1.890.1.5.12.49.18.21.3ScalarvoipSIPStatisticMsgLostread-onlycurrentNumber of message without reply.
1.3.6.1.4.1.890.1.5.12.49.18.21.4ScalarvoipSIPStatisticMsgResentread-onlycurrentNumber of resent message.
1.3.6.1.4.1.890.1.5.12.49.18.21.5ScalarvoipSIPStatisticErrorMsgread-onlycurrentNumber of error message sent.
1.3.6.1.4.1.890.1.5.12.49.18.21.6ScalarvoipSIPStatisticUnIdentifiedMsgread-onlycurrentNumber of parse fail message.
1.3.6.1.4.1.890.1.5.12.49.18.22ScalarvoipProtocolModeread-onlycurrentVoip protocol mode.
1.3.6.1.4.1.890.1.5.12.49.20Nodecoa
1.3.6.1.4.1.890.1.5.12.49.20.1ScalarcoaConfIssueThresholdread-writecurrentCPU overload alarm issue threshold. CPU overload alarm issue threshold should be higher than CPU overload alarm clear threshold.
1.3.6.1.4.1.890.1.5.12.49.20.2ScalarcoaConfClearThresholdread-writecurrentCPU overload alarm clear threshold. CPU overload alarm clear threshold should be lower than CPU overload alarm issue threshold.
1.3.6.1.4.1.890.1.5.12.49.20.3ScalarcoaConfSampleSecondsread-writecurrentSample seconds of cpu overload alarm
1.3.6.1.4.1.890.1.5.12.49.20.4ScalarcoaConfAnalyticMethodread-writecurrentAnalytic method of cpu overload alarm. continuous: if all samples are above <issue-threshold> , issue a CPU overload alarm. If all samples are below <clear-thr…
1.3.6.1.4.1.890.1.5.12.49.20.5TablecpuUtilizationTablenot-accessiblecurrentA table that contains CPU utilization information.
1.3.6.1.4.1.890.1.5.12.49.20.5.1RowcpuUtilizationEntrynot-accessiblecurrentAn entry of cpuUtilizationTable.
1.3.6.1.4.1.890.1.5.12.49.20.5.1.1ColumncpuSecondIndexread-onlycurrentThe past second index of the CPU.
1.3.6.1.4.1.890.1.5.12.49.20.5.1.2ColumncpuValueread-onlycurrentThe CPU utilization. The cpuValue with cpuSecondIndex = 0 is current cpu utilization. Walk for all cpuValue, their value will be updated immediately. Get for c…
1.3.6.1.4.1.890.1.5.12.49.22Nodepm
1.3.6.1.4.1.890.1.5.12.49.22.1TablegePmCurr15minTablenot-accessiblecurrentA list of Ethernet statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.1.1RowgePmCurr15minEntrynot-accessiblecurrentA collection of statistics PM kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.1ColumngePmCurr15minElapsedread-onlycurrentThe seconds elapsed in the current 15 minutes interval
1.3.6.1.4.1.890.1.5.12.49.22.1.1.2ColumngePmCurr15minTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.1.1.3ColumngePmCurr15minTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.4ColumngePmCurr15minTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.5ColumngePmCurr15minTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.6ColumngePmCurr15minRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.1.1.7ColumngePmCurr15minRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.8ColumngePmCurr15minRxBroadcastPktsread-onlycurrentThe total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.9ColumngePmCurr15minRxMulticastPktsread-onlycurrentThe total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a…
1.3.6.1.4.1.890.1.5.12.49.22.1.1.10ColumngePmCurr15minRxCRCAlignErrorsread-onlycurrentThe total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had…
1.3.6.1.4.1.890.1.5.12.49.22.1.1.11ColumngePmCurr15minRxUndersizePktsread-onlycurrentThe total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.12ColumngePmCurr15minRxOversizePktsread-onlycurrentThe total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.13ColumngePmCurr15minRxFragmentsread-onlycurrentThe total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check…
1.3.6.1.4.1.890.1.5.12.49.22.1.1.14ColumngePmCurr15minCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment.
1.3.6.1.4.1.890.1.5.12.49.22.1.1.15ColumngePmCurr15minPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.1.1.16ColumngePmCurr15minPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding framing bits bu…
1.3.6.1.4.1.890.1.5.12.49.22.1.1.17ColumngePmCurr15minPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.22.1.1.18ColumngePmCurr15minPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.22.1.1.19ColumngePmCurr15minPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding framing bits …
1.3.6.1.4.1.890.1.5.12.49.22.1.1.20ColumngePmCurr15minPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.22.1.1.21ColumngePmCurr15minPkts1519to1522Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.22.2TablegePmHist15minTablenot-accessiblecurrentA list of Ethernet statistics historical 15-min PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.2.1RowgePmHist15minEntrynot-accessiblecurrentA collection of statistics historical 15-min PM kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.2.1.1ColumngePmHist15minIndexread-onlycurrentThe index of 15-min historical record
1.3.6.1.4.1.890.1.5.12.49.22.2.1.2ColumngePmHist15minElapsedread-onlycurrentThe seconds elapsed in the historical 15-min interval
1.3.6.1.4.1.890.1.5.12.49.22.2.1.3ColumngePmHist15minTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in historical …
1.3.6.1.4.1.890.1.5.12.49.22.2.1.4ColumngePmHist15minTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.2.1.5ColumngePmHist15minTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted. Note that this does not include multicast packets in historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.2.1.6ColumngePmHist15minTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted in historical 15-min interval. Note that this number does not include packets directed to the broadcast addre…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.7ColumngePmHist15minRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in historical 15-…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.8ColumngePmHist15minRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received in historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.2.1.9ColumngePmHist15minRxBroadcastPktsread-onlycurrentThe total number of good packets received that were directed to the broadcast address in historical 15-min interval. Note that this does not include multicast …
1.3.6.1.4.1.890.1.5.12.49.22.2.1.10ColumngePmHist15minRxMulticastPktsread-onlycurrentThe total number of good packets received in historical 15-min interval that were directed to a multicast address. Note that this number does not include packe…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.11ColumngePmHist15minRxCRCAlignErrorsread-onlycurrentThe total number of packets received in historical 15-min interval that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 …
1.3.6.1.4.1.890.1.5.12.49.22.2.1.12ColumngePmHist15minRxUndersizePktsread-onlycurrentThe total number of packets received in historical 15-min interval that were less than 64 octets long (excluding framing bits, but including FCS octets) and we…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.13ColumngePmHist15minRxOversizePktsread-onlycurrentThe total number of packets received in historical 15-min interval that were longer than 1518 octets (excluding framing bits, but including FCS octets) and wer…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.14ColumngePmHist15minRxFragmentsread-onlycurrentThe total number of packets received in historical 15-min interval that were less than 64 octets in length (excluding framing bits but including FCS octets) an…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.15ColumngePmHist15minCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment in historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.2.1.16ColumngePmHist15minPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 15-min interval that were 64 octets in length (excluding framing bits but including …
1.3.6.1.4.1.890.1.5.12.49.22.2.1.17ColumngePmHist15minPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 15-min interval that were between 65 and 127 octets in length inclusive (excluding f…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.18ColumngePmHist15minPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 15-min interval that were between 128 and 255 octets in length inclusive (excluding …
1.3.6.1.4.1.890.1.5.12.49.22.2.1.19ColumngePmHist15minPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 15-min interval that were between 256 and 511 octets in length inclusive (excluding …
1.3.6.1.4.1.890.1.5.12.49.22.2.1.20ColumngePmHist15minPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 15-min interval that were between 512 and 1023 octets in length inclusive (excluding…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.21ColumngePmHist15minPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 15-min interval that were between 1024 and 1518 octets in length inclusive (excludin…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.22ColumngePmHist15minPkts1519to1522Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 15-min interval that were between 1519 and 1522 octets in length inclusive (excludin…
1.3.6.1.4.1.890.1.5.12.49.22.2.1.23ColumngePmHist15minStartTimeread-onlycurrentThe start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.2.1.24ColumngePmHist15minEndTimeread-onlycurrentThe end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.3TablegePmCurr1dayTablenot-accessiblecurrentA list of Ethernet statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.3.1RowgePmCurr1dayEntrynot-accessiblecurrentA collection of statistics PM kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.1ColumngePmCurr1dayElapsedread-onlycurrentThe seconds elapsed in the current 1 day interval
1.3.6.1.4.1.890.1.5.12.49.22.3.1.2ColumngePmCurr1dayTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.3.1.3ColumngePmCurr1dayTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.4ColumngePmCurr1dayTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.5ColumngePmCurr1dayTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.6ColumngePmCurr1dayRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.3.1.7ColumngePmCurr1dayRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.8ColumngePmCurr1dayRxBroadcastPktsread-onlycurrentThe total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.9ColumngePmCurr1dayRxMulticastPktsread-onlycurrentThe total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a…
1.3.6.1.4.1.890.1.5.12.49.22.3.1.10ColumngePmCurr1dayRxCRCAlignErrorsread-onlycurrentThe total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had…
1.3.6.1.4.1.890.1.5.12.49.22.3.1.11ColumngePmCurr1dayRxUndersizePktsread-onlycurrentThe total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.12ColumngePmCurr1dayRxOversizePktsread-onlycurrentThe total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.13ColumngePmCurr1dayRxFragmentsread-onlycurrentThe total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check…
1.3.6.1.4.1.890.1.5.12.49.22.3.1.14ColumngePmCurr1dayCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment.
1.3.6.1.4.1.890.1.5.12.49.22.3.1.15ColumngePmCurr1dayPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.3.1.16ColumngePmCurr1dayPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding framing bits bu…
1.3.6.1.4.1.890.1.5.12.49.22.3.1.17ColumngePmCurr1dayPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.22.3.1.18ColumngePmCurr1dayPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.22.3.1.19ColumngePmCurr1dayPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding framing bits …
1.3.6.1.4.1.890.1.5.12.49.22.3.1.20ColumngePmCurr1dayPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.22.3.1.21ColumngePmCurr1dayPkts1519to1522Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.22.4TablegePmHist1dayTablenot-accessiblecurrentA list of Ethernet statistics historical 1 day PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.4.1RowgePmHist1dayEntrynot-accessiblecurrentA collection of statistics historical 1 day PM kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.4.1.1ColumngePmHist1dayIndexread-onlycurrentThe index of 1 day historical record
1.3.6.1.4.1.890.1.5.12.49.22.4.1.2ColumngePmHist1dayStartTimeread-onlycurrentThe start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.4.1.3ColumngePmHist1dayEndTimeread-onlycurrentThe end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.4.1.4ColumngePmHist1dayTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in historical …
1.3.6.1.4.1.890.1.5.12.49.22.4.1.5ColumngePmHist1dayTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.4.1.6ColumngePmHist1dayTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted. Note that this does not include multicast packets in historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.4.1.7ColumngePmHist1dayTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted in historical 1 day interval. Note that this number does not include packets directed to the broadcast addres…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.8ColumngePmHist1dayRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in historical 1da…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.9ColumngePmHist1dayRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received in historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.4.1.10ColumngePmHist1dayRxBroadcastPktsread-onlycurrentThe total number of good packets received that were directed to the broadcast address in historical 1 day interval. Note that this does not include multicast p…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.11ColumngePmHist1dayRxMulticastPktsread-onlycurrentThe total number of good packets received in historical 1 day interval that were directed to a multicast address. Note that this number does not include packet…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.12ColumngePmHist1dayRxCRCAlignErrorsread-onlycurrentThe total number of packets received in historical 1 day interval that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 o…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.13ColumngePmHist1dayRxUndersizePktsread-onlycurrentThe total number of packets received in historical 1 day interval that were less than 64 octets long (excluding framing bits, but including FCS octets) and wer…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.14ColumngePmHist1dayRxOversizePktsread-onlycurrentThe total number of packets received in historical 1 day interval that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.15ColumngePmHist1dayRxFragmentsread-onlycurrentThe total number of packets received in historical 1 day interval that were less than 64 octets in length (excluding framing bits but including FCS octets) and…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.16ColumngePmHist1dayCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment in historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.4.1.17ColumngePmHist1dayPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 1day interval that were 64 octets in length (excluding framing bits but including FC…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.18ColumngePmHist1dayPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 1 day interval that were between 65 and 127 octets in length inclusive (excluding fr…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.19ColumngePmHist1dayPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 1 day interval that were between 128 and 255 octets in length inclusive (excluding f…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.20ColumngePmHist1dayPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 1 day interval that were between 256 and 511 octets in length inclusive (excluding f…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.21ColumngePmHist1dayPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 1 day interval that were between 512 and 1023 octets in length inclusive (excluding …
1.3.6.1.4.1.890.1.5.12.49.22.4.1.22ColumngePmHist1dayPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 1 day interval that were between 1024 and 1518 octets in length inclusive (excluding…
1.3.6.1.4.1.890.1.5.12.49.22.4.1.23ColumngePmHist1dayPkts1519to1522Octetsread-onlycurrentThe total number of packets (including bad packets) received in historical 1 day interval that were between 1519 and 1522 octets in length inclusive (excluding…
1.3.6.1.4.1.890.1.5.12.49.22.5TablegePmThreshProfTablenot-accessiblecurrentA list of Ethernet statistics PM threshold profile.
1.3.6.1.4.1.890.1.5.12.49.22.5.1RowgePmThreshProfEntrynot-accessiblecurrentStatistics PM threshold kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.5.1.1ColumngePmThreshProfNameread-onlycurrentThreshold of the total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.5.1.2ColumngePmThreshProfTxOctetsread-createcurrentThreshold of the total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets). …
1.3.6.1.4.1.890.1.5.12.49.22.5.1.3ColumngePmThreshProfTxPktsread-createcurrentThreshold of the total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted. Threshold should be a value in the rang…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.4ColumngePmThreshProfTxBroadcastPktsread-createcurrentThreshold of the total number of broadcast packets transmitted. Note that this does not include multicast packets. Threshold should be a value in the range of …
1.3.6.1.4.1.890.1.5.12.49.22.5.1.5ColumngePmThreshProfTxMulticastPktsread-createcurrentThreshold of the total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address. Threshold sho…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.6ColumngePmThreshProfRxOctetsread-createcurrentThreshold of the total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). Thr…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.7ColumngePmThreshProfRxPktsread-createcurrentThreshold of the total number of packets (including bad packets, broadcast packets, and multicast packets) received. Threshold should be a value in the range o…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.8ColumngePmThreshProfRxBroadcastPktsread-createcurrentThreshold of the total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets. Threshol…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.9ColumngePmThreshProfRxMulticastPktsread-createcurrentThreshold of the total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to th…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.10ColumngePmThreshProfRxCRCAlignErrorsread-createcurrentThreshold of the total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.11ColumngePmThreshProfRxUndersizePktsread-createcurrentThreshold of the total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.12ColumngePmThreshProfRxOversizePktsread-createcurrentThreshold of the total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well …
1.3.6.1.4.1.890.1.5.12.49.22.5.1.13ColumngePmThreshProfRxFragmentsread-createcurrentThreshold of the total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a ba…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.14ColumngePmThreshProfCollisionsread-createcurrentThreshold of the best estimate of the total number of collisions on this Ethernet segment. Threshold should be a value in the range of 64 bit unsigned integer …
1.3.6.1.4.1.890.1.5.12.49.22.5.1.15ColumngePmThreshProfPkts64Octetsread-createcurrentThreshold of the total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including F…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.16ColumngePmThreshProfPkts65to127Octetsread-createcurrentThreshold of the total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding fr…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.17ColumngePmThreshProfPkts128to255Octetsread-createcurrentThreshold of the total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding f…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.18ColumngePmThreshProfPkts256to511Octetsread-createcurrentThreshold of the total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding f…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.19ColumngePmThreshProfPkts512to1023Octetsread-createcurrentThreshold of the total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding …
1.3.6.1.4.1.890.1.5.12.49.22.5.1.20ColumngePmThreshProfPkts1024to1518Octetsread-createcurrentThreshold of the total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.21ColumngePmThreshProfPkts1519to1522Octetsread-createcurrentThreshold of the total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding…
1.3.6.1.4.1.890.1.5.12.49.22.5.1.22ColumngePmThreshProfRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.22.11TablefxsPmCurr15minTablenot-accessiblecurrentA list of voip FXS statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.11.1RowfxsPmCurr15minEntrynot-accessiblecurrentA collection of statistics PM kept for a particular voip FXS interface.
1.3.6.1.4.1.890.1.5.12.49.22.11.1.1ColumnfxsPmCurr15minElapsedread-onlycurrentThe seconds elapsed in the current 15 minutes interval
1.3.6.1.4.1.890.1.5.12.49.22.11.1.2ColumnfxsPmCurr15minRtpElapsedTimeread-onlycurrentThe seconds when RTP session is created for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.11.1.3ColumnfxsPmCurr15minRtpTxBytesread-onlycurrentHow many bytes of RTP packets are transmitted for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.11.1.4ColumnfxsPmCurr15minRtpRxBytesread-onlycurrentHow many bytes of RTP packets are received for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.11.1.5ColumnfxsPmCurr15minRtpTxPacketsread-onlycurrentHow many RTP packets are transmitted for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.11.1.6ColumnfxsPmCurr15minRtpRxPacketsread-onlycurrentHow many RTP packets are received for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.11.1.7ColumnfxsPmCurr15minRtpTxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.11.1.8ColumnfxsPmCurr15minRtpRxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.12TablefxsPmHist15minTablenot-accessiblecurrentA list of voip FXS statistics historical 15-min PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.12.1RowfxsPmHist15minEntrynot-accessiblecurrentA collection of statistics historical 15-min PM kept for a particular voip FXS interface.
1.3.6.1.4.1.890.1.5.12.49.22.12.1.1ColumnfxsPmHist15minIndexread-onlycurrentThe index of 15-min historical record
1.3.6.1.4.1.890.1.5.12.49.22.12.1.2ColumnfxsPmHist15minStartTimeread-onlycurrentThe start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.12.1.3ColumnfxsPmHist15minEndTimeread-onlycurrentThe end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.12.1.4ColumnfxsPmHist15minRtpElapsedTimeread-onlycurrentThe seconds when RTP session is created for a FXS port in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.12.1.5ColumnfxsPmHist15minRtpTxBytesread-onlycurrentHow many bytes of RTP packets are transmitted for a FXS port in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.12.1.6ColumnfxsPmHist15minRtpRxBytesread-onlycurrentHow many bytes of RTP packets are received for a FXS port in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.12.1.7ColumnfxsPmHist15minRtpTxPacketsread-onlycurrentHow many RTP packets are transmitted for a FXS port in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.12.1.8ColumnfxsPmHist15minRtpRxPacketsread-onlycurrentHow many RTP packets are received for a FXS port in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.12.1.9ColumnfxsPmHist15minRtpTxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.12.1.10ColumnfxsPmHist15minRtpRxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.13TablefxsPmCurr1dayTablenot-accessiblecurrentA list of voip FXS statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.13.1RowfxsPmCurr1dayEntrynot-accessiblecurrentA collection of statistics PM kept for a particular voip FXS interface.
1.3.6.1.4.1.890.1.5.12.49.22.13.1.1ColumnfxsPmCurr1dayElapsedread-onlycurrentThe seconds elapsed in the current 1 day interval
1.3.6.1.4.1.890.1.5.12.49.22.13.1.2ColumnfxsPmCurr1dayRtpElapsedTimeread-onlycurrentThe seconds when RTP session is created for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.13.1.3ColumnfxsPmCurr1dayRtpTxBytesread-onlycurrentHow many bytes of RTP packets are transmitted for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.13.1.4ColumnfxsPmCurr1dayRtpRxBytesread-onlycurrentHow many bytes of RTP packets are received for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.13.1.5ColumnfxsPmCurr1dayRtpTxPacketsread-onlycurrentHow many RTP packets are transmitted for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.13.1.6ColumnfxsPmCurr1dayRtpRxPacketsread-onlycurrentHow many RTP packets are received for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.13.1.7ColumnfxsPmCurr1dayRtpTxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.13.1.8ColumnfxsPmCurr1dayRtpRxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.14TablefxsPmHist1dayTablenot-accessiblecurrentA list of voip FXS statistics historical 1 day PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.14.1RowfxsPmHist1dayEntrynot-accessiblecurrentA collection of statistics historical 1 day PM kept for a particular voip FXS interface.
1.3.6.1.4.1.890.1.5.12.49.22.14.1.1ColumnfxsPmHist1dayIndexread-onlycurrentThe index of 15-min historical record
1.3.6.1.4.1.890.1.5.12.49.22.14.1.2ColumnfxsPmHist1dayStartTimeread-onlycurrentThe start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.14.1.3ColumnfxsPmHist1dayEndTimeread-onlycurrentThe end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.14.1.4ColumnfxsPmHist1dayRtpElapsedTimeread-onlycurrentThe seconds when RTP session is created for a FXS port in the historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.14.1.5ColumnfxsPmHist1dayRtpTxBytesread-onlycurrentHow many bytes of RTP packets are transmitted for a FXS port in the historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.14.1.6ColumnfxsPmHist1dayRtpRxBytesread-onlycurrentHow many bytes of RTP packets are received for a FXS port in the historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.14.1.7ColumnfxsPmHist1dayRtpTxPacketsread-onlycurrentHow many RTP packets are transmitted for a FXS port in the historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.14.1.8ColumnfxsPmHist1dayRtpRxPacketsread-onlycurrentHow many RTP packets are received for a FXS port in the historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.14.1.9ColumnfxsPmHist1dayRtpTxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port in the historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.14.1.10ColumnfxsPmHist1dayRtpRxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port in the historical 1 day interval.
1.3.6.1.4.1.890.1.5.12.49.22.15TablefxsPmThreshProfTablenot-accessiblecurrentA list of voip FXS statistics PM threshold profile.
1.3.6.1.4.1.890.1.5.12.49.22.15.1RowfxsPmThreshProfEntrynot-accessiblecurrentStatistics PM threshold kept for a particular voip FXS interface.
1.3.6.1.4.1.890.1.5.12.49.22.15.1.1ColumnfxsPmThreshProfNameread-onlycurrentProfile name of the entry.
1.3.6.1.4.1.890.1.5.12.49.22.15.1.2ColumnfxsPmThreshProfRtpElapsedTimeread-createcurrentThreshold of the total seconds when RTP session is created for a FXS port. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073…
1.3.6.1.4.1.890.1.5.12.49.22.15.1.3ColumnfxsPmThreshProfRtpTxBytesread-createcurrentThreshold of the total number bytes of RTP transmitted for a FXS port. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 184467440737095…
1.3.6.1.4.1.890.1.5.12.49.22.15.1.4ColumnfxsPmThreshProfRtpRxBytesread-createcurrentThreshold of the total number bytes of RTP received for a FXS port. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 184467440737095516…
1.3.6.1.4.1.890.1.5.12.49.22.15.1.5ColumnfxsPmThreshProfRtpTxPacketsread-createcurrentThreshold of the total number of RTP packets transmitted for a FXS port. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 1844674407370…
1.3.6.1.4.1.890.1.5.12.49.22.15.1.6ColumnfxsPmThreshProfRtpRxPacketsread-createcurrentThreshold of the total number of RTP packets received for a FXS port. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 1844674407370955…
1.3.6.1.4.1.890.1.5.12.49.22.15.1.7ColumnfxsPmThreshProfRtpTxLostPacketsread-createcurrentThreshold of the total number of RTP packets that are transmitted by local peer but not received by remote peer for a FXS port. Threshold should be a value in …
1.3.6.1.4.1.890.1.5.12.49.22.15.1.8ColumnfxsPmThreshProfRtpRxLostPacketsread-createcurrentThreshold of the total number of RTP packets that are transmitted by remote peer but not received by local peer for a FXS port. Threshold should be a value in …
1.3.6.1.4.1.890.1.5.12.49.22.15.1.9ColumnfxsPmThreshProfRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.22.16TablegePmCurrStatisticTablenot-accessiblecurrentA list of Ethernet current statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.16.1RowgePmCurrStatisticEntrynot-accessiblecurrentA collection of current statistics PM kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.1ColumngePmCurrStatisticTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.16.1.2ColumngePmCurrStatisticTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.3ColumngePmCurrStatisticTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.4ColumngePmCurrStatisticTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.5ColumngePmCurrStatisticRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.16.1.6ColumngePmCurrStatisticRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.7ColumngePmCurrStatisticRxBroadcastPktsread-onlycurrentThe total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.8ColumngePmCurrStatisticRxMulticastPktsread-onlycurrentThe total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.9ColumngePmCurrStatisticRxCRCAlignErrorsread-onlycurrentThe total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.10ColumngePmCurrStatisticRxUndersizePktsread-onlycurrentThe total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.11ColumngePmCurrStatisticRxOversizePktsread-onlycurrentThe total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.12ColumngePmCurrStatisticRxFragmentsread-onlycurrentThe total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.13ColumngePmCurrStatisticCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment.
1.3.6.1.4.1.890.1.5.12.49.22.16.1.14ColumngePmCurrStatisticPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.16.1.15ColumngePmCurrStatisticPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding framing bits bu…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.16ColumngePmCurrStatisticPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.17ColumngePmCurrStatisticPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.18ColumngePmCurrStatisticPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding framing bits …
1.3.6.1.4.1.890.1.5.12.49.22.16.1.19ColumngePmCurrStatisticPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.20ColumngePmCurrStatisticPkts1519to1522Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.22.16.1.21ColumngePmCurrStatisticTimestampread-onlycurrentThe time when the counters of port updated.
1.3.6.1.4.1.890.1.5.12.49.22.18TablefxsPmCurrStatisticTablenot-accessiblecurrentA list of voip FXS statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.18.1RowfxsPmCurrStatisticEntrynot-accessiblecurrentA collection of statistics PM kept for a particular voip FXS interface.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.1ColumnfxsPmCurrStatisticRtpElapsedTimeread-onlycurrentThe seconds when RTP session is created for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.2ColumnfxsPmCurrStatisticRtpTxBytesread-onlycurrentHow many bytes of RTP packets are transmitted for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.3ColumnfxsPmCurrStatisticRtpRxBytesread-onlycurrentHow many bytes of RTP packets are received for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.4ColumnfxsPmCurrStatisticRtpTxPacketsread-onlycurrentHow many RTP packets are transmitted for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.5ColumnfxsPmCurrStatisticRtpRxPacketsread-onlycurrentHow many RTP packets are received for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.6ColumnfxsPmCurrStatisticRtpTxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.7ColumnfxsPmCurrStatisticRtpRxLostPacketsread-onlycurrentHow many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port.
1.3.6.1.4.1.890.1.5.12.49.22.18.1.8ColumnfxsPmCurrStatisticTimestampread-onlycurrentThe time when the counters of port updated.
1.3.6.1.4.1.890.1.5.12.49.22.19TabledslPmCurr15minTablenot-accessiblecurrentA list of dsl statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.19.1RowdslPmCurr15minEntrynot-accessiblecurrentA collection of statistics PM kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.1ColumndslPmCurr15minElapsedread-onlycurrentThe seconds elapsed in the current 15 minutes interval
1.3.6.1.4.1.890.1.5.12.49.22.19.1.2ColumndslPmCurr15minTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.19.1.3ColumndslPmCurr15minTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.4ColumndslPmCurr15minTxUnicastPktsread-onlycurrentThe total number of unicast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.5ColumndslPmCurr15minTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.6ColumndslPmCurr15minTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.7ColumndslPmCurr15minTxDiscardPktsread-onlycurrentThe total number of discard packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.8ColumndslPmCurr15minRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.19.1.9ColumndslPmCurr15minRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.10ColumndslPmCurr15minRxUnicastPktsread-onlycurrentThe total number of unicast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.11ColumndslPmCurr15minRxBroadcastPktsread-onlycurrentThe total number of broadcast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.12ColumndslPmCurr15minRxMulticastPktsread-onlycurrentThe total number of multicast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.19.1.13ColumndslPmCurr15minRxDiscardPktsread-onlycurrentThe total number of discard packets received.
1.3.6.1.4.1.890.1.5.12.49.22.20TabledslPmHist15minTablenot-accessiblecurrentA list of DSL statistics historical 15-min PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.20.1RowdslPmHist15minEntrynot-accessiblecurrentA collection of statistics historical 15-min PM kept for a particular DSL interface.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.1ColumndslPmHist15minIndexread-onlycurrentThe index of 15-min historical record
1.3.6.1.4.1.890.1.5.12.49.22.20.1.2ColumndslPmHist15minElapsedread-onlycurrentThe seconds elapsed in the historical 15-min interval
1.3.6.1.4.1.890.1.5.12.49.22.20.1.3ColumndslPmHist15minStartTimeread-onlycurrentThe start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.20.1.4ColumndslPmHist15minEndTimeread-onlycurrentThe end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.20.1.5ColumndslPmHist15minTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in the histori…
1.3.6.1.4.1.890.1.5.12.49.22.20.1.6ColumndslPmHist15minTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.7ColumndslPmHist15minTxUnicastPktsread-onlycurrentThe total number of unicast packets transmitted in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.8ColumndslPmHist15minTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.9ColumndslPmHist15minTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.10ColumndslPmHist15minTxDiscardPktsread-onlycurrentThe total number of discard packets transmitted in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.11ColumndslPmHist15minRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in the historical…
1.3.6.1.4.1.890.1.5.12.49.22.20.1.12ColumndslPmHist15minRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.13ColumndslPmHist15minRxUnicastPktsread-onlycurrentThe total number of unicast packets received in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.14ColumndslPmHist15minRxBroadcastPktsread-onlycurrentThe total number of broadcast packets received in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.15ColumndslPmHist15minRxMulticastPktsread-onlycurrentThe total number of multicast packets received in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.20.1.16ColumndslPmHist15minRxDiscardPktsread-onlycurrentThe total number of discard packets received in the historical 15-min interval.
1.3.6.1.4.1.890.1.5.12.49.22.21TabledslPmCurr1dayTablenot-accessiblecurrentA list of dsl statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.21.1RowdslPmCurr1dayEntrynot-accessiblecurrentA collection of statistics PM kept for a particular Ethernet interface.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.1ColumndslPmCurr1dayElapsedread-onlycurrentThe seconds elapsed in the current 15 minutes interval
1.3.6.1.4.1.890.1.5.12.49.22.21.1.2ColumndslPmCurr1dayTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.21.1.3ColumndslPmCurr1dayTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.4ColumndslPmCurr1dayTxUnicastPktsread-onlycurrentThe total number of unicast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.5ColumndslPmCurr1dayTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.6ColumndslPmCurr1dayTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.7ColumndslPmCurr1dayTxDiscardPktsread-onlycurrentThe total number of discard packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.8ColumndslPmCurr1dayRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.21.1.9ColumndslPmCurr1dayRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.10ColumndslPmCurr1dayRxUnicastPktsread-onlycurrentThe total number of unicast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.11ColumndslPmCurr1dayRxBroadcastPktsread-onlycurrentThe total number of broadcast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.12ColumndslPmCurr1dayRxMulticastPktsread-onlycurrentThe total number of multicast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.21.1.13ColumndslPmCurr1dayRxDiscardPktsread-onlycurrentThe total number of discard packets received.
1.3.6.1.4.1.890.1.5.12.49.22.22TabledslPmHist1dayTablenot-accessiblecurrentA list of DSL statistics historical 1-day PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.22.1RowdslPmHist1dayEntrynot-accessiblecurrentA collection of statistics historical 1-day PM kept for a particular DSL interface.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.1ColumndslPmHist1dayIndexread-onlycurrentThe index of 1-day historical record
1.3.6.1.4.1.890.1.5.12.49.22.22.1.2ColumndslPmHist1dayStartTimeread-onlycurrentThe start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.22.1.3ColumndslPmHist1dayEndTimeread-onlycurrentThe end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59
1.3.6.1.4.1.890.1.5.12.49.22.22.1.4ColumndslPmHist1dayTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in the histori…
1.3.6.1.4.1.890.1.5.12.49.22.22.1.5ColumndslPmHist1dayTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.6ColumndslPmHist1dayTxUnicastPktsread-onlycurrentThe total number of unicast packets transmitted in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.7ColumndslPmHist1dayTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.8ColumndslPmHist1dayTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.9ColumndslPmHist1dayTxDiscardPktsread-onlycurrentThe total number of discard packets transmitted in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.10ColumndslPmHist1dayRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in the historical…
1.3.6.1.4.1.890.1.5.12.49.22.22.1.11ColumndslPmHist1dayRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.12ColumndslPmHist1dayRxUnicastPktsread-onlycurrentThe total number of unicast packets received in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.13ColumndslPmHist1dayRxBroadcastPktsread-onlycurrentThe total number of broadcast packets received in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.14ColumndslPmHist1dayRxMulticastPktsread-onlycurrentThe total number of multicast packets received in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.22.1.15ColumndslPmHist1dayRxDiscardPktsread-onlycurrentThe total number of discard packets received in the historical 1-day interval.
1.3.6.1.4.1.890.1.5.12.49.22.23TabledslPmThreshProfTablenot-accessiblecurrentA list of dsl statistics PM threshold profile.
1.3.6.1.4.1.890.1.5.12.49.22.23.1RowdslPmThreshProfEntrynot-accessiblecurrentStatistics PM threshold kept for a particular dsl interface.
1.3.6.1.4.1.890.1.5.12.49.22.23.1.1ColumndslPmThreshProfNameread-onlycurrentProfile name of the entry.
1.3.6.1.4.1.890.1.5.12.49.22.23.1.2ColumndslPmThreshProfTxOctetsread-createcurrentThreshold of the total number of octets of data (including those in bad packets) transmitted on the network. Threshold should be a value in the range of 64 bit…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.3ColumndslPmThreshProfTxPktsread-createcurrentThreshold of the total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted. Threshold should be a value in the rang…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.4ColumndslPmThreshProfTxUnicastPktsread-createcurrentThreshold of the total number of unicast packets transmitted. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615). P…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.5ColumndslPmThreshProfTxBroadcastPktsread-createcurrentThreshold of the total number of broadcast packets transmitted. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.6ColumndslPmThreshProfTxMulticastPktsread-createcurrentThreshold of the total number of multicast packets transmitted. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.7ColumndslPmThreshProfTxDiscardPktsread-createcurrentThreshold of the total number of discard packets transmitted. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615). P…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.8ColumndslPmThreshProfRxOctetsread-createcurrentThreshold of the total number of octets of data (including those in bad packets) received on the network. Threshold should be a value in the range of 64 bit un…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.9ColumndslPmThreshProfRxPktsread-createcurrentThreshold of the total number of packets (including bad packets, broadcast packets, and multicast packets) received. Threshold should be a value in the range o…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.10ColumndslPmThreshProfRxUnicastPktsread-createcurrentThreshold of the total number of unicast packets received. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615). Plea…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.11ColumndslPmThreshProfRxBroadcastPktsread-createcurrentThreshold of the total number of broadcast packets received. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615). Pl…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.12ColumndslPmThreshProfRxMulticastPktsread-createcurrentThreshold of the total number of multicast packets received. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615). Pl…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.13ColumndslPmThreshProfRxDiscardPktsread-createcurrentThreshold of the total number of discard packets received. Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615). Plea…
1.3.6.1.4.1.890.1.5.12.49.22.23.1.14ColumndslPmThreshProfRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.12.49.22.24TabledslPmCurrStatisticTablenot-accessiblecurrentA list of DSL current statistics PM entries.
1.3.6.1.4.1.890.1.5.12.49.22.24.1RowdslPmCurrStatisticEntrynot-accessiblecurrentA collection of current statistics PM kept for a particular DSL interface.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.1ColumndslPmCurrStatisticTxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.24.1.2ColumndslPmCurrStatisticTxPktsread-onlycurrentThe total number of packets (including bad packets, unicast packets, broadcast packets, and multicast packets) transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.3ColumndslPmCurrStatisticTxUnicastPktsread-onlycurrentThe total number of unicast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.4ColumndslPmCurrStatisticTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.5ColumndslPmCurrStatisticTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.6ColumndslPmCurrStatisticTxDiscardread-onlycurrentThe total number of packets which were chosen to be discarded while transmitting.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.7ColumndslPmCurrStatisticRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.22.24.1.8ColumndslPmCurrStatisticRxPktsread-onlycurrentThe total number of packets (including bad packets, unicast packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.9ColumndslPmCurrStatisticRxUnicastPktsread-onlycurrentThe total number of unicast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.10ColumndslPmCurrStatisticRxBroadcastPktsread-onlycurrentThe total number of broadcast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.11ColumndslPmCurrStatisticRxMulticastPktsread-onlycurrentThe total number of multicast packets received.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.12ColumndslPmCurrStatisticRxDiscardread-onlycurrentThe total number of packets which were chosen to be discarded while receiving.
1.3.6.1.4.1.890.1.5.12.49.22.24.1.13ColumndslPmCurrStatisticTimestampread-onlycurrentThe time when the counters of port updated.
1.3.6.1.4.1.890.1.5.12.49.22.25TabledslBondingCurrCountersTablenot-accessiblecurrentA list of DSL current counters status.
1.3.6.1.4.1.890.1.5.12.49.22.25.1RowdslBondingCurrCountersEntrynot-accessiblecurrentA collection of current counters status for a particular DSL bonding group.
1.3.6.1.4.1.890.1.5.12.49.22.25.1.1ColumndslBondingCurrCountersGroupNameread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.2ColumndslBondingCurrCountersPtmRxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.3ColumndslBondingCurrCountersPtmNumFlushRequestsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.4ColumndslBondingCurrCountersPtmNumTimeoutsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.5ColumndslBondingCurrCountersPtmNumDirectSidResetsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.6ColumndslBondingCurrCountersPtmRxSmallFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.7ColumndslBondingCurrCountersPtmRxLargeFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.8ColumndslBondingCurrCountersPtmRxBadFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.9ColumndslBondingCurrCountersPtmRxLostFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.10ColumndslBondingCurrCountersPtmRxLostStartsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.11ColumndslBondingCurrCountersPtmRxLostEndsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.12ColumndslBondingCurrCountersPtmTxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.13ColumndslBondingCurrCountersAtmTxCellsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.14ColumndslBondingCurrCountersAtmRxCellsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.15ColumndslBondingCurrCountersAtmNumFlushRequestsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.16ColumndslBondingCurrCountersAtmNumTimeoutsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.17ColumndslBondingCurrCountersAtmNumDirectSidResetsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.25.1.18ColumndslBondingCurrCountersAtmNumDiscardsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26TabledslBonding15minCountersTablenot-accessiblecurrentA list of DSL current counters status.
1.3.6.1.4.1.890.1.5.12.49.22.26.1RowdslBonding15minCountersEntrynot-accessiblecurrentA collection of 15 minutes counters status for a particular DSL bonding group.
1.3.6.1.4.1.890.1.5.12.49.22.26.1.1ColumndslBonding15minCountersGroupNameread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.2ColumndslBonding15minCountersElapsedread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.3ColumndslBonding15minCountersPtmRxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.4ColumndslBonding15minCountersPtmNumFlushRequestsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.5ColumndslBonding15minCountersPtmNumTimeoutsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.6ColumndslBonding15minCountersPtmNumDirectSidResetsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.7ColumndslBonding15minCountersPtmRxSmallFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.8ColumndslBonding15minCountersPtmRxLargeFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.9ColumndslBonding15minCountersPtmRxBadFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.10ColumndslBonding15minCountersPtmRxLostFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.11ColumndslBonding15minCountersPtmRxLostStartsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.12ColumndslBonding15minCountersPtmRxLostEndsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.13ColumndslBonding15minCountersPtmTxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.14ColumndslBonding15minCountersAtmTxCellsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.15ColumndslBonding15minCountersAtmRxCellsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.16ColumndslBonding15minCountersAtmNumFlushRequestsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.17ColumndslBonding15minCountersAtmNumTimeoutsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.18ColumndslBonding15minCountersAtmNumDirectSidResetsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.26.1.19ColumndslBonding15minCountersAtmNumDiscardsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27TabledslBonding1dayCountersTablenot-accessiblecurrentA list of DSL current counters status.
1.3.6.1.4.1.890.1.5.12.49.22.27.1RowdslBonding1dayCountersEntrynot-accessiblecurrentA collection of 1 day counters status for a particular DSL bonding group.
1.3.6.1.4.1.890.1.5.12.49.22.27.1.1ColumndslBonding1dayCountersGroupNameread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.2ColumndslBonding1dayCountersElapsedread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.3ColumndslBonding1dayCountersPtmRxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.4ColumndslBonding1dayCountersPtmNumFlushRequestsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.5ColumndslBonding1dayCountersPtmNumTimeoutsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.6ColumndslBonding1dayCountersPtmNumDirectSidResetsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.7ColumndslBonding1dayCountersPtmRxSmallFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.8ColumndslBonding1dayCountersPtmRxLargeFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.9ColumndslBonding1dayCountersPtmRxBadFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.10ColumndslBonding1dayCountersPtmRxLostFragmentsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.11ColumndslBonding1dayCountersPtmRxLostStartsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.12ColumndslBonding1dayCountersPtmRxLostEndsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.13ColumndslBonding1dayCountersPtmTxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.14ColumndslBonding1dayCountersAtmTxCellsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.15ColumndslBonding1dayCountersAtmRxCellsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.16ColumndslBonding1dayCountersAtmNumFlushRequestsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.17ColumndslBonding1dayCountersAtmNumTimeoutsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.18ColumndslBonding1dayCountersAtmNumDirectSidResetsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.22.27.1.19ColumndslBonding1dayCountersAtmNumDiscardsread-onlycurrent
1.3.6.1.4.1.890.1.5.12.49.26Nodesyslog
1.3.6.1.4.1.890.1.5.12.49.26.1ScalarsyslogEnableread-writecurrentEnable/disable syslog function.
1.3.6.1.4.1.890.1.5.12.49.26.2TablesyslogServerIpTablenot-accessiblecurrentSets the IP addresses of Syslog managers (stations to send your Syslog message to). You can configure up to four managers.
1.3.6.1.4.1.890.1.5.12.49.26.2.1RowsyslogServerIpEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.26.2.1.1ColumnsyslogServerIpIndexread-onlycurrentIndex of Syslog servers
1.3.6.1.4.1.890.1.5.12.49.26.2.1.2ColumnsyslogServerIpAddressTyperead-writecurrentSyslog server IP address type
1.3.6.1.4.1.890.1.5.12.49.26.2.1.3ColumnsyslogServerIpAddressread-writecurrentSyslog server IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> :: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff Limit: syslogServerIpAddressType …
1.3.6.1.4.1.890.1.5.12.49.27Nodedot3ad
1.3.6.1.4.1.890.1.5.12.49.27.1Tabledot3adTablenot-accessiblecurrentThe table contains 802.3ad configuration.
1.3.6.1.4.1.890.1.5.12.49.27.1.1Rowdot3adEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.27.1.1.1Columndot3adGroupIdread-onlycurrentGroup ID=1 for uplink group in ves1724-58v.
1.3.6.1.4.1.890.1.5.12.49.27.1.1.2Columndot3adEnableread-writecurrentEnable/disable 802.3ad function. When dot3ad is enabled, vlan-untag setting will be synchronized between GE 1 and GE 2 (GE 2 will Follow GE 1). enable(1) - GE …
1.3.6.1.4.1.890.1.5.12.49.27.1.1.3Columndot3adGroupNameread-onlycurrentThe trunking group name.
1.3.6.1.4.1.890.1.5.12.49.27.1.1.4Columndot3adGroupPortListread-onlycurrentThe port list which joins the trunking group.
1.3.6.1.4.1.890.1.5.12.49.27.2ScalarlacpPriorityread-writecurrentLACP system priority.
1.3.6.1.4.1.890.1.5.12.49.27.3ScalarlacpTimeoutread-writecurrentThe time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up. shorttimeout : 1-sec timeout longtimeout : 30-s…
1.3.6.1.4.1.890.1.5.12.49.27.4Nodedot3adStatus
1.3.6.1.4.1.890.1.5.12.49.27.4.1Scalaractorread-onlycurrentThe local system of trunking group.
1.3.6.1.4.1.890.1.5.12.49.27.4.2ScalaractorPriorityread-onlycurrentThe actor priority.
1.3.6.1.4.1.890.1.5.12.49.27.4.3ScalaractorKeyread-onlycurrentThe actor key.
1.3.6.1.4.1.890.1.5.12.49.27.4.4Scalarpartnerread-onlycurrentThe remote system of trunking group.
1.3.6.1.4.1.890.1.5.12.49.27.4.5ScalarpartnerPriorityread-onlycurrentThe partner priority.
1.3.6.1.4.1.890.1.5.12.49.27.4.6ScalarpartnerKeyread-onlycurrentThe partner key.
1.3.6.1.4.1.890.1.5.12.49.27.4.7Scalarlinksread-onlycurrentThe links port.
1.3.6.1.4.1.890.1.5.12.49.27.4.8Scalarsyncsread-onlycurrentThe synchronization state.
1.3.6.1.4.1.890.1.5.12.49.27.5Nodedot3adStatistic
1.3.6.1.4.1.890.1.5.12.49.27.5.1Scalardot3adStatisticTxUtilizationread-onlycurrentLink Aggregation current transmission utilization in 0.01 percentage(100 = 1.00%).
1.3.6.1.4.1.890.1.5.12.49.27.5.2Scalardot3adStatisticTxSpeedread-onlycurrentLink Aggregation current transmission speed in kbps.
1.3.6.1.4.1.890.1.5.12.49.27.5.3Scalardot3adStatisticRxUtilizationread-onlycurrentLink Aggregation current receive utilization in 0.01 percentage(100 = 1.00%).
1.3.6.1.4.1.890.1.5.12.49.27.5.4Scalardot3adStatisticRxSpeedread-onlycurrentLink Aggregation current receiving speed in kbps.
1.3.6.1.4.1.890.1.5.12.49.27.5.5Scalardot3adStatisticsTxOctetread-onlycurrentThe total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.27.5.6Scalardot3adStatisticTxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.
1.3.6.1.4.1.890.1.5.12.49.27.5.7Scalardot3adStatisticTxBroadcastPktsread-onlycurrentThe total number of broadcast packets transmitted. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.27.5.8Scalardot3adStatisticTxMulticastPktsread-onlycurrentThe total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address.
1.3.6.1.4.1.890.1.5.12.49.27.5.9Scalardot3adStatisticRxOctetsread-onlycurrentThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.27.5.10Scalardot3adStatisticRxPktsread-onlycurrentThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.
1.3.6.1.4.1.890.1.5.12.49.27.5.11Scalardot3adStatisticRxBroadcastPktsread-onlycurrentThe total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
1.3.6.1.4.1.890.1.5.12.49.27.5.12Scalardot3adStatisticRxMulticastPktsread-onlycurrentThe total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a…
1.3.6.1.4.1.890.1.5.12.49.27.5.13Scalardot3adStatisticRxCRCAlignErrorsread-onlycurrentThe total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had…
1.3.6.1.4.1.890.1.5.12.49.27.5.14Scalardot3adStatisticRxUndersizePktsread-onlycurrentThe total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.27.5.15Scalardot3adStatisticRxOversizePktsread-onlycurrentThe total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
1.3.6.1.4.1.890.1.5.12.49.27.5.16Scalardot3adStatisticRxFragmentsread-onlycurrentThe total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check…
1.3.6.1.4.1.890.1.5.12.49.27.5.17Scalardot3adStatisticCollisionsread-onlycurrentThe best estimate of the total number of collisions on this Ethernet segment.
1.3.6.1.4.1.890.1.5.12.49.27.5.18Scalardot3adStatisticPkts64Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including FCS octets).
1.3.6.1.4.1.890.1.5.12.49.27.5.19Scalardot3adStatisticPkts65to127Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding framing bits bu…
1.3.6.1.4.1.890.1.5.12.49.27.5.20Scalardot3adStatisticPkts128to255Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.27.5.21Scalardot3adStatisticPkts256to511Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding framing bits b…
1.3.6.1.4.1.890.1.5.12.49.27.5.22Scalardot3adStatisticPkts512to1023Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding framing bits …
1.3.6.1.4.1.890.1.5.12.49.27.5.23Scalardot3adStatisticPkts1024to1518Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.27.5.24Scalardot3adStatisticPkts1519to1522Octetsread-onlycurrentThe total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding framing bits…
1.3.6.1.4.1.890.1.5.12.49.27.5.25Scalardot3adStatisticOperationread-writecurrentclear(1): Clears statistics for current link aggregation. The agent will reset the object's value to zero when the operation is done.
1.3.6.1.4.1.890.1.5.12.49.27.6ScalarloadDistributionread-writecurrentThe fields in packets that will be used as load sharing mechanism. src-mac(1): load distribution will be based on source MAC address of the incoming packets. d…
1.3.6.1.4.1.890.1.5.12.49.29Nodedaisychain
1.3.6.1.4.1.890.1.5.12.49.29.1TabledaisychainTablenot-accessiblecurrentThe table contains if uplink port is in daisychain mode.
1.3.6.1.4.1.890.1.5.12.49.29.1.1RowdaisychainEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.12.49.29.1.1.1ColumndaisychainModeread-writecurrentThe mode of uplink port.
1.3.6.1.4.1.890.1.5.12.49.31Nodesmcast
1.3.6.1.4.1.890.1.5.12.49.31.1ScalarmaxNumberOfSmcastPortGroupsread-onlycurrentThe max number of static multicast groups supported by each port.
1.3.6.1.4.1.890.1.5.12.49.31.2TablesmcastPortTagGroupTablenot-accessiblecurrentThis table specify the static multicast group with MAC address.
1.3.6.1.4.1.890.1.5.12.49.31.2.1RowsmcastPortTagGroupEntrynot-accessiblecurrentAn entry of smcastTagGroupTable.
1.3.6.1.4.1.890.1.5.12.49.31.2.1.1ColumnsmcastPortTagGroupVidread-onlycurrentThe VLAN ID for multicast MAC address group.
1.3.6.1.4.1.890.1.5.12.49.31.2.1.2ColumnsmcastPortTagGroupMacread-onlycurrentThe multicast MAC address of the group.
1.3.6.1.4.1.890.1.5.12.49.31.2.1.3ColumnsmcastPortTagGroupRowStatusread-createcurrentThe row status of the MAC multicast group entry.
1.3.6.1.4.1.890.1.5.12.49.31.3TablesmcastPortUntagGroupTablenot-accessiblecurrentThis table specify the static multicast group with MAC address.
1.3.6.1.4.1.890.1.5.12.49.31.3.1RowsmcastPortUntagGroupEntrynot-accessiblecurrentAn entry of smcastUntagGroupTable.
1.3.6.1.4.1.890.1.5.12.49.31.3.1.1ColumnsmcastPortUntagGroupMacread-onlycurrentThe multicast MAC address of the group.
1.3.6.1.4.1.890.1.5.12.49.31.3.1.2ColumnsmcastPortUntagGroupRowStatusread-createcurrentThe row status of the MAC multicast group entry.
Type Definitions
NameSyntaxStatusDescription
Xdsl2UnitINTEGER { xtuc(1), xtur(2) }current
MIB Viewer