WHISP-APS-MIB
602 objects
This module contains MIB definitions for APs.
Imported Objects
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress |
| WHISP-BOX-MIBV2-MIB | whispBoxEsn whispBoxRFPhysicalRadioEntry |
| WHISP-GLOBAL-REG-MIB | whispAps whispBox whispModules |
| WHISP-TCV2-MIB | EventString WhispLUID WhispMACAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.161.19.1.1.12 | IdentitywhispApsMibModule | This module contains MIB definitions for APs. | ||
| 1.3.6.1.4.1.161.19.3.1.1 | NodewhispApsConfig | |||
| 1.3.6.1.4.1.161.19.3.1.1.1 | ScalargpsInput | read-write | obsolete | The variable is deprecated. See gpsInput in whispBoxConfig. |
| 1.3.6.1.4.1.161.19.3.1.1.2 | ScalarrfFreqCarrier | read-write | deprecated | The primary transmit frequency. Also see radioFreqCarrier. |
| 1.3.6.1.4.1.161.19.3.1.1.3 | ScalarapLinkSpeed | read-write | obsolete | The variable is deprecated. |
| 1.3.6.1.4.1.161.19.3.1.1.4 | ScalardwnLnkData | read-write | deprecated | This attribute is deprecated. Please see radioDownlinkPercent. |
| 1.3.6.1.4.1.161.19.3.1.1.5 | ScalarhighPriorityUpLnkPct | read-write | obsolete | Percentage of uplink slots for high priority data. |
| 1.3.6.1.4.1.161.19.3.1.1.6 | ScalarnumUAckSlots | read-write | obsolete | Total number of upstream ack slots. |
| 1.3.6.1.4.1.161.19.3.1.1.7 | ScalaruAcksReservHigh | read-write | obsolete | Total number of upstream high priority ack slots |
| 1.3.6.1.4.1.161.19.3.1.1.8 | ScalarnumDAckSlots | read-write | obsolete | Total number of downstream ack slots. |
| 1.3.6.1.4.1.161.19.3.1.1.9 | ScalardAcksReservHigh | read-write | obsolete | Total number of high priority downstream ack slots. |
| 1.3.6.1.4.1.161.19.3.1.1.10 | ScalarnumCtlSlots | read-write | obsolete | This OID is deprecated, please use numCtlSlotsHW. |
| 1.3.6.1.4.1.161.19.3.1.1.11 | ScalarnumCtlSlotsReserveHigh | read-write | obsolete | Total number of High priority upstream control (contention) slots. |
| 1.3.6.1.4.1.161.19.3.1.1.12 | ScalarupLnkDataRate | read-write | current | Sustained uplink bandwidth cap. |
| 1.3.6.1.4.1.161.19.3.1.1.13 | ScalarupLnkLimit | read-write | current | Burst uplink bandwidth cap. |
| 1.3.6.1.4.1.161.19.3.1.1.14 | ScalardwnLnkDataRate | read-write | current | Sustained downlink bandwidth cap. |
| 1.3.6.1.4.1.161.19.3.1.1.15 | ScalardwnLnkLimit | read-write | current | Burst downlink bandwidth cap. |
| 1.3.6.1.4.1.161.19.3.1.1.16 | ScalarsectorID | read-write | current | Advertise sector number for an AP. Not supported on 450 platform. |
| 1.3.6.1.4.1.161.19.3.1.1.17 | ScalarmaxRange | read-write | deprecated | This attribute is deprecated. Please see radioMaxRange. |
| 1.3.6.1.4.1.161.19.3.1.1.18 | ScalarairLinkSecurity | read-write | obsolete | Air Link Security. desEnhancedAndAuthentication(2) and authenticationIfAvailable(3) are only for APAS. |
| 1.3.6.1.4.1.161.19.3.1.1.19 | ScalarberMode | read-write | obsolete | AP backgroup BER mode. |
| 1.3.6.1.4.1.161.19.3.1.1.20 | ScalarasIP1 | read-write | obsolete | Obsoleted. Configure with whispApsDNS.authServer1. |
| 1.3.6.1.4.1.161.19.3.1.1.21 | ScalarasIP2 | read-write | obsolete | Obsoleted. Configure with whispApsDNS.authServer2. |
| 1.3.6.1.4.1.161.19.3.1.1.22 | ScalarasIP3 | read-write | obsolete | Obsoleted. Configure with whispApsDNS.authServer3. |
| 1.3.6.1.4.1.161.19.3.1.1.23 | ScalarlanIpAp | read-write | current | LAN IP. |
| 1.3.6.1.4.1.161.19.3.1.1.24 | ScalarlanMaskAp | read-write | current | LAN subnet mask. |
| 1.3.6.1.4.1.161.19.3.1.1.25 | ScalardefaultGwAp | read-write | current | Default gateway |
| 1.3.6.1.4.1.161.19.3.1.1.26 | ScalarprivateIp | read-write | current | Private IP. |
| 1.3.6.1.4.1.161.19.3.1.1.27 | ScalargpsTrap | read-write | current | Variable to enable/disable GPS sync/out-sync traps. |
| 1.3.6.1.4.1.161.19.3.1.1.28 | ScalarregTrap | read-write | current | Variable to enable/disable registration complete/lost traps. |
| 1.3.6.1.4.1.161.19.3.1.1.29 | ScalartxSpreading | read-write | current | Variable to enable/disable Transmit Frame Spreading. This option is for FSK only. |
| 1.3.6.1.4.1.161.19.3.1.1.30 | ScalarapBeaconInfo | read-write | current | Variable to enable/disable displaying AP beacon info through AP eval. |
| 1.3.6.1.4.1.161.19.3.1.1.31 | ScalarauthMode | read-write | current | Variable to enable/disable authentication. The authentication optional mode is for APs only. This variable can only be set when authentication feature is enabl… |
| 1.3.6.1.4.1.161.19.3.1.1.32 | ScalarauthKeyAp | read-write | current | Authentication key. It should be 32 character long. Can be used on MultiPoint AP if AP Authentication mode is selected. Otherwise, it is used on Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.1.33 | ScalarencryptionMode | read-write | current | Variable to enable/disable encryption. |
| 1.3.6.1.4.1.161.19.3.1.1.34 | ScalarntpServerIp | read-write | obsolete | Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3. |
| 1.3.6.1.4.1.161.19.3.1.1.35 | ScalarbroadcastRetryCount | read-write | current | |
| 1.3.6.1.4.1.161.19.3.1.1.36 | ScalarencryptDwBroadcast | read-write | current | To enable or disable Encrypted Downlink Broadcast. For FSK APs. |
| 1.3.6.1.4.1.161.19.3.1.1.37 | ScalarupdateAppAddress | read-write | current | Update Application Address. |
| 1.3.6.1.4.1.161.19.3.1.1.38 | ScalardfsConfig | read-write | obsolete | To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios. |
| 1.3.6.1.4.1.161.19.3.1.1.39 | ScalarvlanEnable | read-write | current | To enable or disable VLAN. |
| 1.3.6.1.4.1.161.19.3.1.1.40 | ScalarconfigSource | read-write | current | To configure CIR, MIR and VLAN through SM or BAM. |
| 1.3.6.1.4.1.161.19.3.1.1.41 | ScalarapRateAdapt | read-write | obsolete | To enable or disable double rate. |
| 1.3.6.1.4.1.161.19.3.1.1.42 | ScalarnumCtlSlotsHW | read-write | deprecated | This attribute is deprecated. Please see radioControlSlots. |
| 1.3.6.1.4.1.161.19.3.1.1.43 | ScalardisplayAPEval | read-write | current | If enable, it allows display of AP Eval Data at the SM. |
| 1.3.6.1.4.1.161.19.3.1.1.44 | ScalarsmIsolation | read-write | current | |
| 1.3.6.1.4.1.161.19.3.1.1.45 | ScalaripAccessFilterEnable | read-write | current | To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using … |
| 1.3.6.1.4.1.161.19.3.1.1.46 | ScalarallowedIPAccess1 | read-write | current | Allow access to AP Management from this IP. 0 is default setting to allow from all IPs. |
| 1.3.6.1.4.1.161.19.3.1.1.47 | ScalarallowedIPAccess2 | read-write | current | Allow access to AP Management from this IP. 0 is default setting to allow from all IPs. |
| 1.3.6.1.4.1.161.19.3.1.1.48 | ScalarallowedIPAccess3 | read-write | current | Allow access to AP Management from this IP. 0 is default setting to allow from all IPs. |
| 1.3.6.1.4.1.161.19.3.1.1.49 | ScalartslBridging | read-write | current | 1 = We are performing Translation Bridging 0 = We are not. |
| 1.3.6.1.4.1.161.19.3.1.1.50 | ScalaruntranslatedArp | read-write | current | 1 = We are sending untranslated ARP response. 0 = We are not. |
| 1.3.6.1.4.1.161.19.3.1.1.51 | ScalarlimitFreqBand900 | read-write | current | 1 = We are limiting the freq band of 900 radios. 0 = We are not. |
| 1.3.6.1.4.1.161.19.3.1.1.52 | ScalartxPwrLevel | read-write | obsolete | Deprecated, use 'transmitterOP' instead. |
| 1.3.6.1.4.1.161.19.3.1.1.53 | ScalarrfFreqCaralt1 | read-write | current | First DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are:… |
| 1.3.6.1.4.1.161.19.3.1.1.54 | ScalarrfFreqCaralt2 | read-write | current | Second DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are… |
| 1.3.6.1.4.1.161.19.3.1.1.55 | ScalarscheduleWhitening | read-write | current | 1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only |
| 1.3.6.1.4.1.161.19.3.1.1.56 | ScalarremoteSpectrumAnalysisDuration | read-write | current | Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds. |
| 1.3.6.1.4.1.161.19.3.1.1.57 | ScalarremoteSpectrumAnalyzerLUID | read-write | current | Get will always return 0. Set will start Remote Spectrum Analyzer on specified LUID. *Warning* This will cause the SM to disconnect from the AP! You will lose … |
| 1.3.6.1.4.1.161.19.3.1.1.58 | ScalarbhReReg | read-write | current | Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh. |
| 1.3.6.1.4.1.161.19.3.1.1.59 | ScalardlnkBcastCIR | read-write | current | Downlink Broadcast CIR (kbps) |
| 1.3.6.1.4.1.161.19.3.1.1.60 | ScalarverifyGPSChecksum | read-write | current | Enable/Disable verification of GPS message checksums. |
| 1.3.6.1.4.1.161.19.3.1.1.61 | ScalarapVlanOverride | read-write | current | Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for running spectrum analysis on the AP.… |
| 1.3.6.1.4.1.161.19.3.1.1.62 | ScalardhcpRelayAgentEnable | read-write | current | Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it. (0) - Relay Agent disabled - SM/CPE devices will perform DHCP… |
| 1.3.6.1.4.1.161.19.3.1.1.63 | ScalardhcpRelayAgentSrvrIP | read-write | obsolete | Obsoleted. Configure with whispApsDNS.dhcprServer. |
| 1.3.6.1.4.1.161.19.3.1.1.64 | ScalarcolorCodeRescanTimer | read-write | current | Time in minutes for the subscriber to begin the idle timer. This timer will begin as soon as a session is started. This only fires if the device is in session … |
| 1.3.6.1.4.1.161.19.3.1.1.65 | ScalarcolorCodeRescanIdleTimer | read-write | current | Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle), then the subscriber will b… |
| 1.3.6.1.4.1.161.19.3.1.1.66 | ScalarauthKeyOptionAP | read-write | current | This option is for Multipoint APs only. This option will only be used if Authentication Mode is set to AP Pre-Shared Key. 0 - Use default key. 1 - Use set key. |
| 1.3.6.1.4.1.161.19.3.1.1.67 | ScalarasIP4 | read-write | obsolete | Obsoleted. Configure with whispApsDNS.authServer4. |
| 1.3.6.1.4.1.161.19.3.1.1.68 | ScalarasIP5 | read-write | obsolete | Obsoleted. Configure with whispApsDNS.authServer5. |
| 1.3.6.1.4.1.161.19.3.1.1.69 | ScalaronlyAllowVer95OrAbove | read-write | current | Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be allowed to register. |
| 1.3.6.1.4.1.161.19.3.1.1.70 | ScalarapRxDelay | read-write | current | This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB. |
| 1.3.6.1.4.1.161.19.3.1.1.71 | ScalarqinqEthType | read-write | current | EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default. |
| 1.3.6.1.4.1.161.19.3.1.1.72 | ScalarsMTxPowerControl | read-write | current | Enable/Disable AP control of SM TX power. Engineering use only. |
| 1.3.6.1.4.1.161.19.3.1.1.73 | ScalarfskSMRcvTargetLvl | read-write | obsolete | Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). FSK only. |
| 1.3.6.1.4.1.161.19.3.1.1.74 | ScalarauthSharedSecret1 | read-write | current | Authentication Server 1 Shared Secret. |
| 1.3.6.1.4.1.161.19.3.1.1.75 | ScalarauthSharedSecret2 | read-write | current | Authentication Server 2 Shared Secret. |
| 1.3.6.1.4.1.161.19.3.1.1.76 | ScalarauthSharedSecret3 | read-write | current | Authentication Server 3 Shared Secret. |
| 1.3.6.1.4.1.161.19.3.1.1.79 | ScalarwhispUsrAuthSharedSecret1 | read-write | obsolete | Obsoleted. Use whispApsConfig.authSharedSecret1. |
| 1.3.6.1.4.1.161.19.3.1.1.80 | ScalarwhispUsrAuthSharedSecret2 | read-write | obsolete | Obsoleted. Use whispApsConfig.authSharedSecret2. |
| 1.3.6.1.4.1.161.19.3.1.1.81 | ScalarwhispUsrAuthSharedSecret3 | read-write | obsolete | Obsoleted. Use whispApsConfig.authSharedSecret3. |
| 1.3.6.1.4.1.161.19.3.1.1.82 | ScalarwhispUsrAcctSvr1 | read-write | obsolete | Obsoleted. Use whispApsDNS.authServer1. |
| 1.3.6.1.4.1.161.19.3.1.1.83 | ScalarwhispUsrAcctSvr2 | read-write | obsolete | Obsoleted. Use whispApsDNS.authServer2. |
| 1.3.6.1.4.1.161.19.3.1.1.84 | ScalarwhispUsrAcctSvr3 | read-write | obsolete | Obsoleted. Use whispApsDNS.authServer3. |
| 1.3.6.1.4.1.161.19.3.1.1.85 | ScalarwhispUsrAuthPhase1 | read-write | deprecated | Select method for User Authentication. This is deprecated. Please use whispUsrAuth. |
| 1.3.6.1.4.1.161.19.3.1.1.86 | ScalarwhispWebUseAuthServer | read-write | obsolete | Obsoleted. Use whispApsDNS.authServer[1-3]. |
| 1.3.6.1.4.1.161.19.3.1.1.87 | ScalardropSession | read-write | current | SM/BHS MAC Address to drop session from the AP/BHM. |
| 1.3.6.1.4.1.161.19.3.1.1.88 | ScalaruGPSPower | read-write | current | Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set). |
| 1.3.6.1.4.1.161.19.3.1.1.89 | ScalartimeZone | read-write | current | Set the timezone offset for the radio. This change takes affect dynamically. The available timezones are: 0 : (UTC) UTC - Coordinated Universal Time 1 : (UTC) … |
| 1.3.6.1.4.1.161.19.3.1.1.90 | ScalarofdmSMRcvTargetLvl | read-write | current | Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value. |
| 1.3.6.1.4.1.161.19.3.1.1.91 | ScalarradiusPort | read-write | current | Port used to connect to the RADIUS server. Default is 1812. |
| 1.3.6.1.4.1.161.19.3.1.1.92 | ScalarradiusAcctPort | read-write | current | Port used to for RADIUS Accounting. Default is 1813. |
| 1.3.6.1.4.1.161.19.3.1.1.93 | ScalarlastSesStatsReset | read-only | current | Displays the timestamp of last reset of session stats or None otherwise. |
| 1.3.6.1.4.1.161.19.3.1.1.94 | ScalarresetSesStats | read-write | current | Resets the session stats if true. |
| 1.3.6.1.4.1.161.19.3.1.1.95 | ScalarrfOLTrap | read-write | current | Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level. |
| 1.3.6.1.4.1.161.19.3.1.1.96 | ScalarrfOLThreshold | read-write | current | Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager. |
| 1.3.6.1.4.1.161.19.3.1.1.97 | ScalarrfOLEnable | read-write | current | Enable/Disable Throughput RF Overload Monitoring monitoring. |
| 1.3.6.1.4.1.161.19.3.1.1.98 | ScalaractionListFilename | read-write | current | Name of the file that contains the Action List for Auto update commands from CNUT |
| 1.3.6.1.4.1.161.19.3.1.1.99 | ScalarenableAutoupdate | read-write | current | Enables/Disables auto-update of the SM's under an AP |
| 1.3.6.1.4.1.161.19.3.1.1.100 | ScalaraccountingSmReAuthInterval | read-write | current | Select Interval for Reauthentication of SM |
| 1.3.6.1.4.1.161.19.3.1.1.101 | ScalarsyslogDomainNameAppend | read-write | deprecated | This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup |
| 1.3.6.1.4.1.161.19.3.1.1.102 | ScalarsyslogServerAddr | read-write | deprecated | This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup |
| 1.3.6.1.4.1.161.19.3.1.1.103 | ScalarsyslogServerPort | read-write | current | This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup |
| 1.3.6.1.4.1.161.19.3.1.1.104 | ScalarsyslogXmitAP | read-write | current | Enables/Disables transmission of Syslogs from AP/BHM |
| 1.3.6.1.4.1.161.19.3.1.1.105 | ScalarsyslogXmitSMs | read-write | current | Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS. |
| 1.3.6.1.4.1.161.19.3.1.1.106 | ScalaraccountingInterimUpdateInterval | read-write | current | Select Interval for Interim Updates |
| 1.3.6.1.4.1.161.19.3.1.1.107 | ScalargpsOutputEn | read-write | current | Enable or Disable GPS sync output enable. |
| 1.3.6.1.4.1.161.19.3.1.1.108 | ScalarremoveIdleSMs | read-write | current | Setting this to a value 1 will remove all SMs which are in Idle state from AP's Session list. |
| 1.3.6.1.4.1.161.19.3.1.1.109 | ScalarlastTimeIdleSMsRemoved | read-only | current | Displays the timestamp of last removal of Idle SMs from AP's Session list |
| 1.3.6.1.4.1.161.19.3.1.1.110 | ScalaruserAuthSharedSecret1 | read-write | current | User Authentication Server 1 Shared Secret. |
| 1.3.6.1.4.1.161.19.3.1.1.111 | ScalaruserAuthSharedSecret2 | read-write | current | User Authentication Server 2 Shared Secret. |
| 1.3.6.1.4.1.161.19.3.1.1.112 | ScalaruserAuthSharedSecret3 | read-write | current | User Authentication Server 3 Shared Secret. |
| 1.3.6.1.4.1.161.19.3.1.1.113 | ScalartrapDelayAfterBootup | read-write | current | Delays sending of SNMP traps after radio boots up for this many number of seconds. |
| 1.3.6.1.4.1.161.19.3.1.1.206 | ScalarradioMode | read-write | obsolete | This OID is obsolete. |
| 1.3.6.1.4.1.161.19.3.1.1.207 | ScalarrfTelnetAccess | read-write | current | Allows/prohibits uplink Telnet access (SM->AP). |
| 1.3.6.1.4.1.161.19.3.1.1.208 | ScalarupLnkMaxBurstDataRate | read-write | current | Maximum burst uplink rate. |
| 1.3.6.1.4.1.161.19.3.1.1.209 | ScalardwnLnkMaxBurstDataRate | read-write | current | Maximum burst downlink rate. |
| 1.3.6.1.4.1.161.19.3.1.1.210 | ScalarrfPPPoEPADIForwarding | read-write | current | Enables/disables forwarding of PPPoE PADI packets from AP to SM. |
| 1.3.6.1.4.1.161.19.3.1.1.211 | ScalarallowedIPAccessNMLength1 | read-write | current | Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed |
| 1.3.6.1.4.1.161.19.3.1.1.212 | ScalarallowedIPAccessNMLength2 | read-write | current | Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed |
| 1.3.6.1.4.1.161.19.3.1.1.213 | ScalarallowedIPAccessNMLength3 | read-write | current | Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed |
| 1.3.6.1.4.1.161.19.3.1.1.214 | ScalarbridgeFloodUnknownsEnable | read-write | current | Forward unicast packets with an unknown address to all SMs. This can significantly reduce downlink throughput. (0) - Drop unknown unicast packets. (1) - Forwar… |
| 1.3.6.1.4.1.161.19.3.1.1.215 | ScalarberModSelect | read-write | current | The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM. |
| 1.3.6.1.4.1.161.19.3.1.1.216 | ScalarremoteSpectrumAnalyzerScanBandwidth | read-write | current | Scanning Bandwidth used for the Remote Spectrum Analyzer. Only available on PMP 450. |
| 1.3.6.1.4.1.161.19.3.1.1.217 | ScalarmulticastVCDataRate | read-write | current | Enables and selects the data rate of the Multicast VC. If disabled, multicast messages are sent using the broadcast VC. This VC does not automatically rate ada… |
| 1.3.6.1.4.1.161.19.3.1.1.218 | ScalardlnkMcastCIR | read-write | current | Downlink Multicast CIR (kbps) |
| 1.3.6.1.4.1.161.19.3.1.1.219 | ScalarmulticastRetryCount | read-write | current | Multicast Repeat Count : Range 0 - 2. For APs. |
| 1.3.6.1.4.1.161.19.3.1.1.220 | ScalarapConfigAdjacentChanSupport | read-write | current | Used to enable or disable adjacent channel support. This could be needed when there is no guard band between co-located APs. Only available for APs in 3 GHz, 4… |
| 1.3.6.1.4.1.161.19.3.1.1.221 | Scalarpmp430InteropMode | read-write | current | When the AP talks to a PMP 430 it can do so in either MIMO-A or SISO mode. 0 = MIMO-A 1 = SISO Only applies to PMP 450 AP at 5 GHz. By default in 13.2 the AP t… |
| 1.3.6.1.4.1.161.19.3.1.1.223 | ScalarframePeriod | read-write | current | Changes frame period to 2.5 ms or 5ms. Note: If set to 5 ms, only SM/BHS from 13.3 and onward will be able to register. Only on PMP and PTP 450. Not available … |
| 1.3.6.1.4.1.161.19.3.1.1.224 | ScalarenableRadiusDynAuth | read-write | current | This option can be used to enable Radius Dynamic Authorization Extensions.Both CoA, which change the SM config parameters from the Radius server while an SM is… |
| 1.3.6.1.4.1.161.19.3.1.1.225 | Scalarpmp430SMRegistration | read-write | current | Option to allow/disallow PMP 430 SMs to register to this AP. When disabled PMP 430 SMs registrations will be rejected. |
| 1.3.6.1.4.1.161.19.3.1.1.226 | ScalardisableAuthForICCSM | read-write | current | Bypass Authentication for ICC SMs |
| 1.3.6.1.4.1.161.19.3.1.1.228 | ScalaronlyAllowPMP450iSMRegistration | read-write | current | Option to limit SM registration to only allow PMP 450i devices or allow all devices (450i/450/430) to register. PMP 430 SM registration can be further limited … |
| 1.3.6.1.4.1.161.19.3.1.1.229 | Scalarpmp450430LegacyMode | read-write | current | Option to put the PMP 450b/450i/450m into a Legacy mode for communicating with PMP 450 SMs running SW older than 13.3 and PMP 430 SMs running SW older than 13.… |
| 1.3.6.1.4.1.161.19.3.1.1.230 | ScalarpagerRejectFilterSelect | read-write | current | Enable or disable the Pager filter which can filter out Pager signals interfering in the 900 MHz band. NOTE: Frequencies 920 MHz and above will not work when e… |
| 1.3.6.1.4.1.161.19.3.1.1.231 | ScalarfreeRunGPSSyncBypass | read-write | current | Enable to allow Free Run to begin immediately after radio bootup. Normally, Free Run is only allowed after GPS sync has been established at least once, then lo… |
| 1.3.6.1.4.1.161.19.3.1.1.232 | ScalaruseAPManagementVIDForICCSM | read-write | current | When enabled, SM connected via ICC uses APs MVID instead of its own. |
| 1.3.6.1.4.1.161.19.3.1.1.233 | ScalarframeAlignmentLegacyMode | read-write | current | Option to adjust the frame alignment for compatibility with different GPS sync sources and software versions. Please see user guide for more information. Not a… |
| 1.3.6.1.4.1.161.19.3.1.1.234 | ScalarnoRebootFreqChange | read-write | current | Enable/Disable option to change frequency without rebooting. Engineering use only. |
| 1.3.6.1.4.1.161.19.3.1.1.236 | ScalarmumimoTrialMode | read-write | current | Enable MU-MIMO, Trial Mode units will decrement until units are exhausted or Trial Mode is disabled. Disable MU-MIMO, radio is still functional with SU-MIMO op… |
| 1.3.6.1.4.1.161.19.3.1.1.247 | ScalarprioritizeMgmtData | read-write | current | 0 - Management data will use low priority VC. 1 - If high priority VC is configured will use that, otherwise will use low priority VC |
| 1.3.6.1.4.1.161.19.3.1.2 | NodewhispApsLink | |||
| 1.3.6.1.4.1.161.19.3.1.2.1 | NodewhispApsLinkTestConfig | |||
| 1.3.6.1.4.1.161.19.3.1.2.1.1 | ScalarlinkTestLUID | read-write | deprecated | LUID selection for Link Test. Valid range: 2-255. [This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.1.2 | ScalarlinkTestDuration | read-write | deprecated | Duration for the Link Test. Valid range: 2-10 seconds. [This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.1.3 | ScalarlinkTestAction | read-write | deprecated | Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicat… |
| 1.3.6.1.4.1.161.19.3.1.2.1.4 | ScalarlinkTestPktLength | read-write | deprecated | Packet length for Link Test. Valid range: 64-1714 bytes. [This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.1.5 | ScalarlinkTestMode | read-write | deprecated | Link Test Mode 0 = Link Test without Bridging 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR 3 = Extrapolated Link Test (send only a few packe… |
| 1.3.6.1.4.1.161.19.3.1.2.1.6 | ScalarlinkTestSNRCalculation | read-write | deprecated | Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will… |
| 1.3.6.1.4.1.161.19.3.1.2.1.7 | ScalarlinkTestWithDualPath | read-write | deprecated | Link Test with: 0 = Low Priority VC only 1 = High and Low Priority VCs [This variable is deprecated. Please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.1.8 | ScalarlinkTestNumPkt | read-write | deprecated | Number of packets to send. Valid range: 0-64 where 0 will flood the link for the duration of the test. [This variable is deprecated. Please refer whispBoxLink … |
| 1.3.6.1.4.1.161.19.3.1.2.1.9 | ScalarlinkTestForceModulation | read-write | deprecated | Engineering use only. Link Test with: 0 = Normal Rate Adapt algorithm 1 = Force to max modultion - No Rate Adapt Algorithm [This variable is deprecated. Please… |
| 1.3.6.1.4.1.161.19.3.1.2.1.10 | ScalarlinkTestDirection | read-write | deprecated | Link Test Direction - Engineering Use Only 0 = default (will do bidirectional) 1 = Uplink Only 2 = Downlink Only 3 = Bi-Directional (same as 0, setting to 3 wi… |
| 1.3.6.1.4.1.161.19.3.1.2.2 | NodewhispApsLinkTestResult | |||
| 1.3.6.1.4.1.161.19.3.1.2.2.1 | ScalartestLUID | read-only | deprecated | LUID number of selected unit. [This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.2 | ScalarlinkTestStatus | read-only | deprecated | Status for Link Test.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.3 | ScalarlinkTestError | read-only | deprecated | Error status of Link Test: (1) Failed to recieve handshake from remote device (2) No session is currently active. Please try again after session established. (… |
| 1.3.6.1.4.1.161.19.3.1.2.2.4 | ScalartestDuration | read-only | deprecated | Duration of link test.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.5 | ScalardownLinkRate | read-only | deprecated | Downlink Rate.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.6 | ScalarupLinkRate | read-only | deprecated | Uplink Rate.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.7 | ScalardownLinkEff | read-only | deprecated | Down Link Efficiency. |
| 1.3.6.1.4.1.161.19.3.1.2.2.8 | ScalarmaxDwnLinkIndex | read-only | deprecated | For link test results, the maximum possible downlink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.9 | ScalaractDwnLinkIndex | read-only | deprecated | Actual down link index.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.10 | ScalarexpDwnFragCount | read-only | deprecated | Expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.11 | ScalaractDwnFragCount | read-only | deprecated | Actual Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.12 | ScalarupLinkEff | read-only | deprecated | Up link efficiency.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.13 | ScalarexpUpFragCount | read-only | deprecated | Uplink expected Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.14 | ScalaractUpFragCount | read-only | deprecated | Actual uplink Fragment Count.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.15 | ScalarmaxUpLinkIndex | read-only | deprecated | For link test results, the maximum possible uplink efficiency percentage (always 100%).[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.16 | ScalaractUpLinkIndex | read-only | deprecated | Actual Up link index.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.2.2.17 | Scalarfragments1xDwnLinkVertical | read-only | deprecated | Number of fragments received on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please r… |
| 1.3.6.1.4.1.161.19.3.1.2.2.18 | Scalarfragments2xDwnLinkVertical | read-only | deprecated | Number of fragments received on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please… |
| 1.3.6.1.4.1.161.19.3.1.2.2.19 | Scalarfragments3xDwnLinkVertical | read-only | deprecated | Number of fragments received on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please… |
| 1.3.6.1.4.1.161.19.3.1.2.2.20 | Scalarfragments4xDwnLinkVertical | read-only | deprecated | Number of fragments received on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, pleas… |
| 1.3.6.1.4.1.161.19.3.1.2.2.21 | Scalarfragments1xUpLinkVertical | read-only | deprecated | Number of fragments received on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please ref… |
| 1.3.6.1.4.1.161.19.3.1.2.2.22 | Scalarfragments2xUpLinkVertical | read-only | deprecated | Number of fragments received on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please r… |
| 1.3.6.1.4.1.161.19.3.1.2.2.23 | Scalarfragments3xUpLinkVertical | read-only | deprecated | Number of fragments received on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please r… |
| 1.3.6.1.4.1.161.19.3.1.2.2.24 | Scalarfragments4xUpLinkVertical | read-only | deprecated | Number of fragments received on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please … |
| 1.3.6.1.4.1.161.19.3.1.2.2.25 | ScalarbitErrorsCorrected1xDwnLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variab… |
| 1.3.6.1.4.1.161.19.3.1.2.2.26 | ScalarbitErrorsCorrected2xDwnLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This vari… |
| 1.3.6.1.4.1.161.19.3.1.2.2.27 | ScalarbitErrorsCorrected3xDwnLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This vari… |
| 1.3.6.1.4.1.161.19.3.1.2.2.28 | ScalarbitErrorsCorrected4xDwnLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This var… |
| 1.3.6.1.4.1.161.19.3.1.2.2.29 | ScalarbitErrorsCorrected1xUpLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable… |
| 1.3.6.1.4.1.161.19.3.1.2.2.30 | ScalarbitErrorsCorrected2xUpLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variab… |
| 1.3.6.1.4.1.161.19.3.1.2.2.31 | ScalarbitErrorsCorrected3xUpLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This variab… |
| 1.3.6.1.4.1.161.19.3.1.2.2.32 | ScalarbitErrorsCorrected4xUpLinkVertical | read-only | deprecated | Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path. [This varia… |
| 1.3.6.1.4.1.161.19.3.1.2.2.33 | ScalarsignalToNoiseRatioDownLinkVertical | read-only | deprecated | Estimated Signal to Noise Ratio in dB for the down link. For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please … |
| 1.3.6.1.4.1.161.19.3.1.2.2.34 | ScalarsignalToNoiseRatioUpLinkVertical | read-only | deprecated | Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the vertical path. [This variable is deprecated, please re… |
| 1.3.6.1.4.1.161.19.3.1.2.2.35 | Scalarfragments1xDwnLinkHorizontal | read-only | deprecated | Number of fragments received on down link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted … |
| 1.3.6.1.4.1.161.19.3.1.2.2.36 | Scalarfragments2xDwnLinkHorizontal | read-only | deprecated | Number of fragments received on down link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counte… |
| 1.3.6.1.4.1.161.19.3.1.2.2.37 | Scalarfragments3xDwnLinkHorizontal | read-only | deprecated | Number of fragments received on down link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counte… |
| 1.3.6.1.4.1.161.19.3.1.2.2.38 | Scalarfragments4xDwnLinkHorizontal | read-only | deprecated | Number of fragments received on down link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be count… |
| 1.3.6.1.4.1.161.19.3.1.2.2.39 | Scalarfragments1xUpLinkHorizontal | read-only | deprecated | Number of fragments received on up link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on… |
| 1.3.6.1.4.1.161.19.3.1.2.2.40 | Scalarfragments2xUpLinkHorizontal | read-only | deprecated | Number of fragments received on up link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted … |
| 1.3.6.1.4.1.161.19.3.1.2.2.41 | Scalarfragments3xUpLinkHorizontal | read-only | deprecated | Number of fragments received on up link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted … |
| 1.3.6.1.4.1.161.19.3.1.2.2.42 | Scalarfragments4xUpLinkHorizontal | read-only | deprecated | Number of fragments received on up link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted… |
| 1.3.6.1.4.1.161.19.3.1.2.2.43 | ScalarbitErrorsCorrected1xDwnLinkHorizontal | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments receive… |
| 1.3.6.1.4.1.161.19.3.1.2.2.44 | ScalarbitErrorsCorrected2xDwnLinkHorizontal | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments recei… |
| 1.3.6.1.4.1.161.19.3.1.2.2.45 | ScalarbitErrorsCorrected3xDwnLinkHorizontal | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments recei… |
| 1.3.6.1.4.1.161.19.3.1.2.2.46 | ScalarbitErrorsCorrected4xDwnLinkHorizontal | read-only | deprecated | Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments rece… |
| 1.3.6.1.4.1.161.19.3.1.2.2.47 | ScalarbitErrorsCorrected1xUpLinkHorizontal | read-only | deprecated | Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received … |
| 1.3.6.1.4.1.161.19.3.1.2.2.48 | ScalarbitErrorsCorrected2xUpLinkHorizontal | read-only | deprecated | Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments receive… |
| 1.3.6.1.4.1.161.19.3.1.2.2.49 | ScalarbitErrorsCorrected3xUpLinkHorizontal | read-only | deprecated | Engineering use only. Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal p… |
| 1.3.6.1.4.1.161.19.3.1.2.2.50 | ScalarbitErrorsCorrected4xUpLinkHorizontal | read-only | deprecated | Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments receiv… |
| 1.3.6.1.4.1.161.19.3.1.2.2.51 | ScalarsignalToNoiseRatioDownLinkHorizontal | read-only | deprecated | Estimated Signal to Noise Ratio in dB for the down link. For MIMO and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0.… |
| 1.3.6.1.4.1.161.19.3.1.2.2.52 | ScalarsignalToNoiseRatioUpLinkHorizontal | read-only | deprecated | Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will retu… |
| 1.3.6.1.4.1.161.19.3.1.2.2.53 | ScalardownLinkRateExtrapolated | read-only | deprecated | Extrapolated Downlink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what woul… |
| 1.3.6.1.4.1.161.19.3.1.2.2.54 | ScalarupLinkRateExtrapolated | read-only | deprecated | Extrapolated Uplink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would … |
| 1.3.6.1.4.1.161.19.3.1.2.4 | ScalarwhispRegStatus | read-only | obsolete | This shows the registration status of a link.[This variable is deprecated, please refer whispBoxLink OIDs] |
| 1.3.6.1.4.1.161.19.3.1.3 | NodewhispApsGPS | |||
| 1.3.6.1.4.1.161.19.3.1.3.1 | ScalarwhispGPSStats | read-only | current | This shows whether the AP is synchrinized to the GPS timer. |
| 1.3.6.1.4.1.161.19.3.1.3.2 | ScalargpsSyncSource | read-only | current | Source of GPS Sync Pulse. |
| 1.3.6.1.4.1.161.19.3.1.3.3 | ScalargpsSyncStatus | read-only | current | Current Live value of Sync Status. |
| 1.3.6.1.4.1.161.19.3.1.3.4 | ScalargpsTrackingMode | read-only | current | GPS tracking mode. |
| 1.3.6.1.4.1.161.19.3.1.3.5 | ScalargpsTime | read-only | current | GPS time. |
| 1.3.6.1.4.1.161.19.3.1.3.6 | ScalargpsDate | read-only | current | GPS date. |
| 1.3.6.1.4.1.161.19.3.1.3.7 | ScalargpsSatellitesTracked | read-only | current | Returns Current number of satellites GPS is tracking in string format .use gpsSatellitesTrackedInt to get the value in integer |
| 1.3.6.1.4.1.161.19.3.1.3.8 | ScalargpsSatellitesVisible | read-only | current | Return Number of satellites GPS is seeing in string format.Use gpsSatellitesVisibleInt to get value in integer |
| 1.3.6.1.4.1.161.19.3.1.3.9 | ScalargpsHeight | read-only | current | GPS height. |
| 1.3.6.1.4.1.161.19.3.1.3.10 | ScalargpsAntennaConnection | read-only | current | Antenna Connection status. |
| 1.3.6.1.4.1.161.19.3.1.3.11 | ScalargpsLatitude | read-only | current | GPS Latitude. |
| 1.3.6.1.4.1.161.19.3.1.3.12 | ScalargpsLongitude | read-only | current | GPS Longitude. |
| 1.3.6.1.4.1.161.19.3.1.3.13 | ScalargpsInvalidMsg | read-only | current | Number of invalid messages. |
| 1.3.6.1.4.1.161.19.3.1.3.14 | ScalargpsRestartCount | read-only | current | Number of GPS unit restarts. |
| 1.3.6.1.4.1.161.19.3.1.3.15 | ScalargpsReInitCount | read-only | current | GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device. |
| 1.3.6.1.4.1.161.19.3.1.3.16 | ScalargpsReceiverInfo | read-only | current | A textual string contains information on GPS receiver. |
| 1.3.6.1.4.1.161.19.3.1.3.17 | ScalargpsFreeRun | read-write | current | This variable is deprecated. Setting this value to false will set AutoSync. Setting this value to true will set AutoSync plus Free Run. |
| 1.3.6.1.4.1.161.19.3.1.3.18 | ScalarautoSyncStatus | read-only | current | Current Live value of Sync Status. Following values represent what sources have sync. (0) No Sync (1) On-board GPS Sync (2) Timing Port/UGPS Sync (3) On-board … |
| 1.3.6.1.4.1.161.19.3.1.3.19 | ScalargpsSatellitesTrackedInt | read-only | current | Current number of satellites GPS is tracking in integer format. |
| 1.3.6.1.4.1.161.19.3.1.3.20 | ScalargpsSatellitesVisibleInt | read-only | current | Number of satellites the GPS sees in integer format |
| 1.3.6.1.4.1.161.19.3.1.4 | TablewhispLinkTable | not-accessible | current | Link Status Table |
| 1.3.6.1.4.1.161.19.3.1.4.1 | RowwhispLinkEntry | not-accessible | current | Link Status |
| 1.3.6.1.4.1.161.19.3.1.4.1.1 | ColumnlinkLUID | read-only | current | LUID number. |
| 1.3.6.1.4.1.161.19.3.1.4.1.2 | ColumnlinkDescr | read-only | current | A textual string containing information about the unit. This string should include the name of the manufacturer, the product name and the version of the hardwa… |
| 1.3.6.1.4.1.161.19.3.1.4.1.3 | ColumnlinkPhysAddress | read-only | current | Physical Address of the unit. |
| 1.3.6.1.4.1.161.19.3.1.4.1.4 | ColumnlinkMtu | read-only | current | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.4.1.161.19.3.1.4.1.5 | ColumnlinkSpeed | read-only | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.161.19.3.1.4.1.6 | ColumnlinkOperStatus | read-only | obsolete | This variable is not used. |
| 1.3.6.1.4.1.161.19.3.1.4.1.7 | ColumnlinkInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.161.19.3.1.4.1.8 | ColumnlinkInUcastPkts | read-only | current | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.9 | ColumnlinkInNUcastPkts | read-only | current | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.10 | ColumnlinkInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.161.19.3.1.4.1.11 | ColumnlinkInError | read-only | current | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.12 | ColumnlinkInUnknownProtos | read-only | current | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.13 | ColumnlinkOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.161.19.3.1.4.1.14 | ColumnlinkOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.161.19.3.1.4.1.15 | ColumnlinkOutNUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.4.1.161.19.3.1.4.1.16 | ColumnlinkOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.161.19.3.1.4.1.17 | ColumnlinkOutError | read-only | current | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.161.19.3.1.4.1.18 | ColumnlinkOutQLen | read-only | current | Number of packets in output packet queue. |
| 1.3.6.1.4.1.161.19.3.1.4.1.19 | ColumnlinkSessState | read-only | current | Current operational state of an interface. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Challenge 5 = Registering… |
| 1.3.6.1.4.1.161.19.3.1.4.1.20 | ColumnlinkESN | read-only | current | Link Electronic serial number. It is MAC address. |
| 1.3.6.1.4.1.161.19.3.1.4.1.21 | ColumnlinkRSSI | read-only | current | The average RSSI reading of all packets received from an SM. Applicable to FSK radios only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.22 | ColumnlinkAveJitter | read-only | current | The average Jitter reading of all packets received from an SM. Applicable to FSK radios only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.23 | ColumnlinkLastJitter | read-only | current | Last jitter value. Applicable to FSK radios only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.24 | ColumnlinkAirDelay | read-only | current | The current round trip air delay in bits measured between the AP and SM. |
| 1.3.6.1.4.1.161.19.3.1.4.1.25 | ColumnlinkRegCount | read-only | current | The number of times an SM has registered to an AP. |
| 1.3.6.1.4.1.161.19.3.1.4.1.26 | ColumnlinkReRegCount | read-only | current | The number of times an SM has tried to register with the AP while it still has an active session with the AP. |
| 1.3.6.1.4.1.161.19.3.1.4.1.27 | ColumnlinkTimeOut | read-only | current | Link time out. |
| 1.3.6.1.4.1.161.19.3.1.4.1.28 | ColumnlinkLastRSSI | read-only | current | The last RSSI reading of all packets received from an SM. Applicable to FSK radios only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.29 | ColumnsessionCount | read-only | current | How many times has this mac been in/out of session. |
| 1.3.6.1.4.1.161.19.3.1.4.1.30 | ColumnsoftwareVersion | read-only | current | The software version of registered SM. |
| 1.3.6.1.4.1.161.19.3.1.4.1.31 | ColumnsoftwareBootVersion | read-only | current | The software boot version of registered SM. |
| 1.3.6.1.4.1.161.19.3.1.4.1.32 | ColumnfpgaVersion | read-only | current | The FPGA version of registered SM. |
| 1.3.6.1.4.1.161.19.3.1.4.1.33 | ColumnlinkSiteName | read-only | current | The site name of the registered SM. |
| 1.3.6.1.4.1.161.19.3.1.4.1.34 | ColumnavgPowerLevel | read-only | current | The average power level of registered SM. For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM until… |
| 1.3.6.1.4.1.161.19.3.1.4.1.35 | ColumnlastPowerLevel | read-only | current | The last power level of registered SM. For MIMO radios this is the combined receive power. |
| 1.3.6.1.4.1.161.19.3.1.4.1.36 | ColumnsesDownLinkRate | read-only | current | Down link rate. |
| 1.3.6.1.4.1.161.19.3.1.4.1.37 | ColumnsesDownLinkLimit | read-only | current | Down link limit. |
| 1.3.6.1.4.1.161.19.3.1.4.1.38 | ColumnsesUpLinkRate | read-only | current | Uplink rate. |
| 1.3.6.1.4.1.161.19.3.1.4.1.39 | ColumnsesUpLinkLimit | read-only | current | Uplink limit. |
| 1.3.6.1.4.1.161.19.3.1.4.1.40 | ColumnadaptRate | read-only | current | Adapt rate of registered SM. |
| 1.3.6.1.4.1.161.19.3.1.4.1.41 | ColumnsesLoUpCIR | read-only | current | Low priority up link CIR. |
| 1.3.6.1.4.1.161.19.3.1.4.1.42 | ColumnsesLoDownCIR | read-only | current | Low priority down link CIR. |
| 1.3.6.1.4.1.161.19.3.1.4.1.43 | ColumnsesHiUpCIR | read-only | current | High priority up link CIR. |
| 1.3.6.1.4.1.161.19.3.1.4.1.44 | ColumnsesHiDownCIR | read-only | current | High priority down link CIR. |
| 1.3.6.1.4.1.161.19.3.1.4.1.45 | ColumnplatformVer | read-only | current | Platform Version. |
| 1.3.6.1.4.1.161.19.3.1.4.1.46 | ColumnsmSessionTmr | read-only | current | SM session uptime |
| 1.3.6.1.4.1.161.19.3.1.4.1.47 | ColumnsmSessionSeqNumMismatch | read-only | current | The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication challenge and authentication response messages. This… |
| 1.3.6.1.4.1.161.19.3.1.4.1.48 | ColumndataVCNum | read-only | current | The normal priority Data VC number in use for this link. |
| 1.3.6.1.4.1.161.19.3.1.4.1.49 | ColumnhiPriQEn | read-only | current | Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios. |
| 1.3.6.1.4.1.161.19.3.1.4.1.50 | ColumndataVCNumHiQ | read-only | current | The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place. |
| 1.3.6.1.4.1.161.19.3.1.4.1.51 | ColumnlinkInOctetsHiQ | read-only | current | The total number of octets received on High Priority Queue, including framing characters. |
| 1.3.6.1.4.1.161.19.3.1.4.1.52 | ColumnlinkInUcastPktsHiQ | read-only | current | The number of subnetwork-unicast packets on High Priority Queue delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.53 | ColumnlinkInNUcastPktsHiQ | read-only | current | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets on High Priority Queue delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.54 | ColumnlinkInDiscardsHiQ | read-only | current | The number of inbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverab… |
| 1.3.6.1.4.1.161.19.3.1.4.1.55 | ColumnlinkInErrorHiQ | read-only | current | The number of inbound packets on High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.56 | ColumnlinkInUnknownProtosHiQ | read-only | current | The number of packets received on High Priority Queue via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.161.19.3.1.4.1.57 | ColumnlinkOutOctetsHiQ | read-only | current | The total number of octets on High Priority Queue transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.161.19.3.1.4.1.58 | ColumnlinkOutUcastPktsHiQ | read-only | current | The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that w… |
| 1.3.6.1.4.1.161.19.3.1.4.1.59 | ColumnlinkOutNUcastPktsHiQ | read-only | current | The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subn… |
| 1.3.6.1.4.1.161.19.3.1.4.1.60 | ColumnlinkOutDiscardsHiQ | read-only | current | The number of outbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmit… |
| 1.3.6.1.4.1.161.19.3.1.4.1.61 | ColumnlinkOutErrorHiQ | read-only | current | The number of outbound packets on High Priority Queue that could not be transmitted because of errors. |
| 1.3.6.1.4.1.161.19.3.1.4.1.62 | ColumnvcQOverflow | read-only | current | The number of packets dropped due to Queue overflow on VC. |
| 1.3.6.1.4.1.161.19.3.1.4.1.63 | ColumnvcQOverflowHiQ | read-only | current | The number of packets dropped due to Queue overflow on High Priority VC, if enabled. |
| 1.3.6.1.4.1.161.19.3.1.4.1.64 | Columnp7p8HiPriQEn | read-only | current | Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always. |
| 1.3.6.1.4.1.161.19.3.1.4.1.65 | Columnp7p8HiPriQ | read-only | current | Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0. |
| 1.3.6.1.4.1.161.19.3.1.4.1.66 | ColumnlinkAirDelayns | read-only | current | The current round trip air delay in nanoseconds measured between the AP and SM. |
| 1.3.6.1.4.1.161.19.3.1.4.1.67 | ColumnlinkQualityAPData | read-only | current | Engineering use only. The current link quality of the SM's data from the AP. This is relative to the current modulation rate (1X, 2X, 3X, etc). |
| 1.3.6.1.4.1.161.19.3.1.4.1.69 | ColumnlinkManagementIP | read-only | current | Management IP Address of the unit. 0 indicates SM is not publically addressable. |
| 1.3.6.1.4.1.161.19.3.1.4.1.70 | ColumnlinkFragmentsReceived1XVertical | read-only | current | Engineering use only. Number of fragments received in 1x (QPSK) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. |
| 1.3.6.1.4.1.161.19.3.1.4.1.71 | ColumnlinkFragmentsReceived2XVertical | read-only | current | Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. |
| 1.3.6.1.4.1.161.19.3.1.4.1.72 | ColumnlinkFragmentsReceived3XVertical | read-only | current | Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. |
| 1.3.6.1.4.1.161.19.3.1.4.1.73 | ColumnlinkFragmentsReceived4XVertical | read-only | current | Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. |
| 1.3.6.1.4.1.161.19.3.1.4.1.74 | ColumnsignalToNoiseRatioVertical | read-only | current | Estimate of the receive signal to noise ratio in dB. For GenII OFDM and forward. For MIMO this is the vertical path. |
| 1.3.6.1.4.1.161.19.3.1.4.1.75 | ColumnradiusReplyMsg | read-only | current | The RADIUS Reply-Msg populated for the SM. This is only valid when using a backen AAA server. |
| 1.3.6.1.4.1.161.19.3.1.4.1.76 | ColumnautoUpdateStatus | read-only | current | status of the auto update process |
| 1.3.6.1.4.1.161.19.3.1.4.1.77 | ColumnradiusFramedIPAddress | read-only | current | This Attribute indicates the IP address to be configured for the SM management interface. |
| 1.3.6.1.4.1.161.19.3.1.4.1.78 | ColumnradiusFramedIPNetmask | read-only | current | This Attribute indicates the netmask to be configured for the SM management interface. |
| 1.3.6.1.4.1.161.19.3.1.4.1.79 | ColumnradiusDefaultGateway | read-only | current | This Attribute indicates the default gateway to be configured for the SM management interface. |
| 1.3.6.1.4.1.161.19.3.1.4.1.80 | ColumnlinkFragmentsReceived1XHorizontal | read-only | current | Engineering use only. Number of fragments received in 1x (QPSK) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this wi… |
| 1.3.6.1.4.1.161.19.3.1.4.1.81 | ColumnlinkFragmentsReceived2XHorizontal | read-only | current | Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this … |
| 1.3.6.1.4.1.161.19.3.1.4.1.82 | ColumnlinkFragmentsReceived3XHorizontal | read-only | current | Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this … |
| 1.3.6.1.4.1.161.19.3.1.4.1.83 | ColumnlinkFragmentsReceived4XHorizontal | read-only | current | Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this… |
| 1.3.6.1.4.1.161.19.3.1.4.1.84 | ColumnsignalToNoiseRatioHorizontal | read-only | current | Estimate of the receive signal to noise ratio in dB. MIMO radios only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. |
| 1.3.6.1.4.1.161.19.3.1.4.1.86 | ColumnlinkSignalStrengthRatio | read-only | current | Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.87 | ColumnlinkRadioDbmHorizontal | read-only | current | Receive power level of the horizontal antenna in dBm. MIMO radios only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.88 | ColumnlinkRadioDbmVertical | read-only | current | Receive power level of the vertical antenna in dBm. MIMO radios only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.89 | ColumnmaxSMTxPwr | read-only | current | Returns whether SM is transmitting at its configured max power level. |
| 1.3.6.1.4.1.161.19.3.1.4.1.90 | ColumnproductType | read-only | current | Returns which type of product the SM/BHS is. 450 platform only. |
| 1.3.6.1.4.1.161.19.3.1.4.1.91 | ColumnlinkAdaptRateLowPri | read-only | current | The current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-Q… |
| 1.3.6.1.4.1.161.19.3.1.4.1.92 | ColumnlinkAdaptRateHighPri | read-only | current | The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO o… |
| 1.3.6.1.4.1.161.19.3.1.4.1.93 | ColumnavgPowerLevelInt | read-only | current | The average power level of registered SM as Integer. For systems that support power control, this value can read '0' when the AP adjusts the transmit power of … |
| 1.3.6.1.4.1.161.19.3.1.4.1.94 | ColumnmimoPowerLevelVertical | read-only | current | For MIMO radios, the Vertical power level of registered SM as Integer. The Vertical Power (+45) level in case of 2.4GHz Dual slant MIMO |
| 1.3.6.1.4.1.161.19.3.1.4.1.95 | ColumnmimoPowerLevelHorizontal | read-only | current | For MIMO radios, the Horizontal power level of registered SM as Integer. The Horizontal Power(-45) level in case of 2.4GHz Dual slant MIMO |
| 1.3.6.1.4.1.161.19.3.1.4.1.96 | ColumnlinkSwVersion | read-only | current | The swversion of registered SM, to be used internally. |
| 1.3.6.1.4.1.161.19.3.1.4.1.97 | ColumnspatialFrequency | read-only | current | The spatial frequency of registered SM. Spatial Frequency is the phase advance of the wavefront from one antenna column to the next caused by the angle at whic… |
| 1.3.6.1.4.1.161.19.3.1.5 | NodewhispApsEvent | |||
| 1.3.6.1.4.1.161.19.3.1.5.1 | NodewhispApsRegEvent | |||
| 1.3.6.1.4.1.161.19.3.1.5.1.1 | NotificationwhispRegComplete | current | Signals registration complete. | |
| 1.3.6.1.4.1.161.19.3.1.5.1.2 | NotificationwhispRegLost | current | Signals registration lost. | |
| 1.3.6.1.4.1.161.19.3.1.5.1.3 | NotificationwhispRegFailure | current | Signals a registration failure has occured. | |
| 1.3.6.1.4.1.161.19.3.1.5.1.4 | NotificationwhispDefKeyUsed | current | Signals Default Key used for encryptiont. | |
| 1.3.6.1.4.1.161.19.3.1.5.2 | NodewhispGPSEvent | |||
| 1.3.6.1.4.1.161.19.3.1.5.2.1 | NotificationwhispGPSInSync | current | Signals a transition from not-synchronized to synchronized. | |
| 1.3.6.1.4.1.161.19.3.1.5.2.2 | NotificationwhispGPSOutSync | current | Signals a transition from synchronized to not-synchronized. | |
| 1.3.6.1.4.1.161.19.3.1.5.3 | NodewhispApsDfsEvent | |||
| 1.3.6.1.4.1.161.19.3.1.5.3.1 | NotificationwhispRadarDetected | current | Radar detected transmit stopped. | |
| 1.3.6.1.4.1.161.19.3.1.5.3.2 | NotificationwhispRadarEnd | current | Radar ended back to normal transmit. | |
| 1.3.6.1.4.1.161.19.3.1.5.4 | NodewhispApRegulatoryEvent | |||
| 1.3.6.1.4.1.161.19.3.1.5.4.1 | NotificationregulatoryApCheckInvalidChanFailed | current | Regulatory Check failed for the unit due to a invalid channel for the configured region. regulatoryStatus - Text description for the failure. physAddress - the… | |
| 1.3.6.1.4.1.161.19.3.1.5.4.2 | NotificationregulatoryCheckFailedNoRegionAp | current | Regulatory Check failed because a valid region has not be configured. physAddress - the MAC address of the unit. | |
| 1.3.6.1.4.1.161.19.3.1.5.4.3 | NotificationregulatoryApCheckInvalidChBwFailed | current | Regulatory Check failed due to an invalid channel bandwidth for the configured region. regulatoryStatus - Text description for the failure. physAddress - the M… | |
| 1.3.6.1.4.1.161.19.3.1.5.5 | NodewhispApRFOverloadEvent | |||
| 1.3.6.1.4.1.161.19.3.1.5.5.1 | NotificationrfLinkOverloadCondition | current | AP has exceeded the preset discard percentage in the RF Downlink Direction. rfOutDiscardRate - Current discard Rate. physAddress - the MAC address of the unit. | |
| 1.3.6.1.4.1.161.19.3.1.5.6 | NodewhispApsMumimoTrialEvent | |||
| 1.3.6.1.4.1.161.19.3.1.5.6.1 | NotificationmumimoTrialEvent | current | MU-MIMO Trial Event Notification. Value indicates percentage of trial licenses remaining. | |
| 1.3.6.1.4.1.161.19.3.1.6 | NodewhispApsGroups | |||
| 1.3.6.1.4.1.161.19.3.1.6.1 | GroupwhispLinkTestGroup | current | WHiSP APs link test group. | |
| 1.3.6.1.4.1.161.19.3.1.6.2 | GroupwhispApsConfigGroup | current | WHiSP APs configuration group. | |
| 1.3.6.1.4.1.161.19.3.1.6.3 | GroupwhispApsLinkTableGroup | current | WHiSP APs Link Table group. | |
| 1.3.6.1.4.1.161.19.3.1.6.4 | GroupwhispApsNotifGroup | current | WHiSP APs notification group. | |
| 1.3.6.1.4.1.161.19.3.1.6.5 | GroupwhispApsFailedRegTableGroup | current | WHiSP APs Failed Registration Table group. | |
| 1.3.6.1.4.1.161.19.3.1.6.7 | GroupwhispApsFrUtlStatsIntervalLowGroup | current | WHiSP APs Frame Utilization Statistics group for interval of 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. | |
| 1.3.6.1.4.1.161.19.3.1.6.8 | GroupwhispApsFrUtlStatsIntervalMediumGroup | current | WHiSP APs Frame Utilization Statistics group for interval of 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |
| 1.3.6.1.4.1.161.19.3.1.6.9 | GroupwhispApsFrUtlStatsIntervalHighGroup | current | WHiSP APs Frame Utilization Statistics group for interval of 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. | |
| 1.3.6.1.4.1.161.19.3.1.7 | NodewhispApsStatus | |||
| 1.3.6.1.4.1.161.19.3.1.7.1 | ScalarregCount | read-only | current | Number of registered SMs. |
| 1.3.6.1.4.1.161.19.3.1.7.2 | ScalargpsStatus | read-only | current | GPS status. |
| 1.3.6.1.4.1.161.19.3.1.7.3 | ScalarradioSlicingAp | read-only | obsolete | The variable is deprecated. |
| 1.3.6.1.4.1.161.19.3.1.7.4 | ScalarradioTxGainAp | read-only | current | Radio transmit gain setting. |
| 1.3.6.1.4.1.161.19.3.1.7.5 | ScalardataSlotDwn | read-only | current | Number of data slot down. |
| 1.3.6.1.4.1.161.19.3.1.7.6 | ScalardataSlotUp | read-only | current | Number of data slot up. |
| 1.3.6.1.4.1.161.19.3.1.7.7 | ScalardataSlotUpHi | read-only | current | Number of high priority data slot up. |
| 1.3.6.1.4.1.161.19.3.1.7.8 | ScalarupLnkAckSlot | read-only | current | Uplink ack slots. |
| 1.3.6.1.4.1.161.19.3.1.7.9 | ScalarupLnkAckSlotHi | read-only | current | Hige priority uplink ack slots. |
| 1.3.6.1.4.1.161.19.3.1.7.10 | ScalardwnLnkAckSlot | read-only | current | Downlink ack slots. |
| 1.3.6.1.4.1.161.19.3.1.7.11 | ScalardwnLnkAckSlotHi | read-only | current | Hige priority downlink ack slots. |
| 1.3.6.1.4.1.161.19.3.1.7.12 | ScalarnumCtrSlot | read-only | current | Number of contention slots. |
| 1.3.6.1.4.1.161.19.3.1.7.13 | ScalarnumCtrSlotHi | read-only | current | High priority control slot. |
| 1.3.6.1.4.1.161.19.3.1.7.14 | ScalardfsStatus | read-only | current | Dynamic frequency shifting status. |
| 1.3.6.1.4.1.161.19.3.1.7.15 | ScalardfsStatusPrimary | read-only | current | Dynamic frequency shifting status for Primary Channel. |
| 1.3.6.1.4.1.161.19.3.1.7.16 | ScalardfsStatusAlt1 | read-only | current | Dynamic frequency shifting status for Alternate Channel 1 |
| 1.3.6.1.4.1.161.19.3.1.7.17 | ScalardfsStatusAlt2 | read-only | current | Dynamic frequency shifting status for Alternate Channel 2 |
| 1.3.6.1.4.1.161.19.3.1.7.18 | ScalarmaxRegSMCount | read-only | current | Maximum number of unique Subscriber Modules registered with this AP at once |
| 1.3.6.1.4.1.161.19.3.1.7.19 | ScalarsystemTime | read-only | current | Displays the system time of the unit |
| 1.3.6.1.4.1.161.19.3.1.7.20 | ScalarlastNTPTime | read-only | current | Displays the last NTP time acquired by the AP |
| 1.3.6.1.4.1.161.19.3.1.7.21 | ScalarregulatoryStatus | read-only | current | The current status of the regulatory check on the AP. |
| 1.3.6.1.4.1.161.19.3.1.7.22 | ScalardhcpRlyAgntStat-reqRecvd | read-only | current | Number of DHCP Requests received by the DHCP Relay. |
| 1.3.6.1.4.1.161.19.3.1.7.23 | ScalardhcpRlyAgntStat-reqRelayed | read-only | current | Number of DHCP Requests relayed by the DHCP Relay. |
| 1.3.6.1.4.1.161.19.3.1.7.24 | ScalardhcpRlyAgntStat-reqDiscards | read-only | current | Number of DHCP Requests discarded by the DHCP Relay. |
| 1.3.6.1.4.1.161.19.3.1.7.25 | ScalardhcpRlyAgntStat-respRecvd | read-only | current | Number of DHCP Replies received by the DHCP Relay. |
| 1.3.6.1.4.1.161.19.3.1.7.26 | ScalardhcpRlyAgntStat-respRelayed | read-only | current | Number of DHCP Replies relayed by the DHCP Relay. |
| 1.3.6.1.4.1.161.19.3.1.7.27 | ScalardhcpRlyAgntStat-respDiscards | read-only | current | Number of DHCP Replies discarded by the DHCP Relay. |
| 1.3.6.1.4.1.161.19.3.1.7.28 | ScalardhcpRlyAgntStat-untrustedDiscards | read-only | current | Number of untrusted messages discarded by the DHCP Relay. |
| 1.3.6.1.4.1.161.19.3.1.7.29 | ScalardhcpRlyAgntStat-maxHopDiscards | read-only | current | Number of messages discarded by the DHCP Relay due to exceeded max hop. |
| 1.3.6.1.4.1.161.19.3.1.7.30 | ScalardhcpRlyAgntStat-pktTooBig | read-only | current | Number of messages forwarded without relay information by the DHCP Relay due to relay information exceeding max message size. |
| 1.3.6.1.4.1.161.19.3.1.7.31 | ScalardhcpRlyAgntStat-invalidGiaddrDiscards | read-only | current | Number of messages discarded by the DHCP Relay due to invalid giaddr in packet. |
| 1.3.6.1.4.1.161.19.3.1.7.32 | ScalarregFailureCount | read-only | current | The Total number or Registration Grant Failures. |
| 1.3.6.1.4.1.161.19.3.1.7.33 | ScalarntpLogSNMP | read-only | current | NTP Log |
| 1.3.6.1.4.1.161.19.3.1.7.34 | ScalaruGPSPowerStatus | read-only | current | Current UGPS Power Status (UGPS capable APs only). |
| 1.3.6.1.4.1.161.19.3.1.7.35 | ScalarrfOutDiscardRate | read-only | current | Percentage of OutDiscards on the RF link (RF Overload %) in the last minute. |
| 1.3.6.1.4.1.161.19.3.1.7.36 | ScalarautoUpdateGlobalStatus | read-only | current | Status of the Auto-Update Command |
| 1.3.6.1.4.1.161.19.3.1.7.37 | ScalarcurrentRadioFreqCarrier | read-only | current | Returns the current operating frequency of the AP. Units vary by platform: FSK 5.2, 5.4, 5.7 GHz: OID returns MHz FSK 900 MHz, 2.4 GHz: OID returns 100's of KH… |
| 1.3.6.1.4.1.161.19.3.1.7.38 | ScalarmumimoMode | read-only | current | Returns the current operating mode of MU-MIMO. PMP 450m only. |
| 1.3.6.1.4.1.161.19.3.1.7.39 | ScalarvcCount | read-only | current | Number of VCs allocated across all registered SMs. |
| 1.3.6.1.4.1.161.19.3.1.7.40 | ScalarmumimoTrialPercentageRemaining | read-only | current | Percentage of remaining MU-MIMO Trial Licenses |
| 1.3.6.1.4.1.161.19.3.1.8 | TablewhispFailedRegTable | not-accessible | current | List of link test results |
| 1.3.6.1.4.1.161.19.3.1.8.1 | RowwhispFailedRegEntry | not-accessible | current | List of Failed ESNs |
| 1.3.6.1.4.1.161.19.3.1.8.1.1 | ColumnregGrantReason | read-only | current | The registration failure reason |
| 1.3.6.1.4.1.161.19.3.1.8.1.2 | ColumnregFailESN | read-only | current | The ESN that failed to register |
| 1.3.6.1.4.1.161.19.3.1.8.1.3 | ColumnregFailTime | read-only | current | The number of ticks that occurred when the ESN failed to register |
| 1.3.6.1.4.1.161.19.3.1.8.1.4 | ColumnregFailSeqNum | read-only | current | The sequence when the register failure was given. |
| 1.3.6.1.4.1.161.19.3.1.8.1.5 | ColumnregFailReasonText | read-only | current | The text description of the failure. |
| 1.3.6.1.4.1.161.19.3.1.9 | NodewhispApsDNS | |||
| 1.3.6.1.4.1.161.19.3.1.9.1 | ScalarntpDomainNameAppend | read-write | current | Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', ntpServ… |
| 1.3.6.1.4.1.161.19.3.1.9.2 | ScalarntpServer1 | read-write | current | NTP Server 1 Address. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.3 | ScalarntpServer2 | read-write | current | NTP Server 2 Address. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.4 | ScalarntpServer3 | read-write | current | NTP Server 3 Address. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.5 | ScalardhcprDomainNameAppend | read-write | current | Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', dhcprSe… |
| 1.3.6.1.4.1.161.19.3.1.9.6 | ScalardhcprServer | read-write | current | DHCP Server IP which will be used for forwarding DHCP messages by the DHCP Relay Agent in the MultiPoint AP. - Format is either an IP address or DNS name. - De… |
| 1.3.6.1.4.1.161.19.3.1.9.7 | ScalarauthDomainNameAppend | read-write | current | Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', authSer… |
| 1.3.6.1.4.1.161.19.3.1.9.8 | ScalarauthServer1 | read-write | current | Authentication Server 1. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.9 | ScalarauthServer2 | read-write | current | Authentication Server 2. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.10 | ScalarauthServer3 | read-write | current | Authentication Server 3. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.11 | ScalarauthServer4 | read-write | current | Authentication Server 4. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.12 | ScalarauthServer5 | read-write | current | Authentication Server 5. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.13 | ScalaracctDomainNameAppend | read-write | obsolete | Obsoleted. Use whispApsDNS.authDomainNameAppend. |
| 1.3.6.1.4.1.161.19.3.1.9.14 | ScalaruserAuthServer1 | read-write | current | User Authentication Server 1. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.15 | ScalaruserAuthServer2 | read-write | current | User Authentication Server 2. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.16 | ScalaruserAuthServer3 | read-write | current | User Authentication Server 3. Format is either an IP address or DNS name. |
| 1.3.6.1.4.1.161.19.3.1.9.17 | ScalaruserAuthDomainNameAppend | read-write | current | Select whether to append the configured management domain name to the configured user authentication server names. For example, if dnsMgmtDomainName is set to … |
| 1.3.6.1.4.1.161.19.3.1.10 | NodewhispApsRFConfig | |||
| 1.3.6.1.4.1.161.19.3.1.10.1 | TablewhispApsRFConfigRadios | not-accessible | current | Radio configuration table. |
| 1.3.6.1.4.1.161.19.3.1.10.1.1 | RowwhispApsRFConfigRadioEntry | not-accessible | current | Radio configuration entry. |
| 1.3.6.1.4.1.161.19.3.1.10.1.1.1 | ColumnradioFreqCarrier | read-write | current | RF Frequency. Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available frequencies. 0: wired. |
| 1.3.6.1.4.1.161.19.3.1.10.1.1.2 | ColumnradioDownlinkPercent | read-write | current | This is the percentage of frame data space allocated for downlink. Various radio platforms and regions will have different allowable downlink percentages. |
| 1.3.6.1.4.1.161.19.3.1.10.1.1.3 | ColumnradioMaxRange | read-write | current | Access point max range. |
| 1.3.6.1.4.1.161.19.3.1.10.1.1.4 | ColumnradioControlSlots | read-write | current | Total number of contention slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios). For PMP 450 the minimum is 1 control slot, others… |
| 1.3.6.1.4.1.161.19.3.1.10.1.1.5 | ColumnradioTransmitOutputPower | read-write | current | Transmitter output power. |
| 1.3.6.1.4.1.161.19.3.1.10.1.1.6 | ColumnradioColorCode | read-write | current | Color code. |
| 1.3.6.1.4.1.161.19.3.1.11 | NodewhispApsControls | |||
| 1.3.6.1.4.1.161.19.3.1.11.1 | ScalarclearLinkTableStats | read-write | current | Setting this to a nonzero value will clear the link table stats. |
| 1.3.6.1.4.1.161.19.3.1.12 | NodewhispApsFrUtlStats | |||
| 1.3.6.1.4.1.161.19.3.1.12.1 | NodewhispApsFrUtlStatsIntervalLow | |||
| 1.3.6.1.4.1.161.19.3.1.12.1.1 | ScalarfrUtlLowTotalDownlinkUtilization | read-only | current | Percentage of total downlink utilization in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.2 | ScalarfrUtlLowTotalUplinkUtilization | read-only | current | Percentage of total uplink utilization in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.3 | ScalarfrUtlLowTotalDownlinkSlots | read-only | current | Total downlink data slots in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.4 | ScalarfrUtlLowDownlinkLowPrioSlots | read-only | current | Number of data slots used for downlink low priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.5 | ScalarfrUtlLowDownlinkHiPrioSlots | read-only | current | Number of data slots used for downlink high priority traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.6 | ScalarfrUtlLowDownlinkBcastSlots | read-only | current | Number of data slots used for downlink broadcast and multicast traffic in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.7 | ScalarfrUtlLowDownlinkAckSlots | read-only | current | Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.8 | ScalarfrUtlLowDownlinkCntlMsgSlots | read-only | current | Number of data slots used for downlink registration control messages in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.9 | ScalarfrUtlLowTotalUplinkSlots | read-only | current | Total uplink data slots in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.10 | ScalarfrUtlLowUplinkLowPrioSlots | read-only | current | Number of data slots used for uplink low priority traffic in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.11 | ScalarfrUtlLowUplinkHiPrioSlots | read-only | current | Number of data slots used for uplink high priority traffic in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.12 | ScalarfrUtlLowUplinkAckSlots | read-only | current | Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.13 | ScalarfrUtlLowMaxDownlinkSlots | read-only | current | Maximum possible downlink data slots for a minute. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 60). Downlink slots in… |
| 1.3.6.1.4.1.161.19.3.1.12.1.14 | ScalarfrUtlLowMaxUplinkSlots | read-only | current | Maximum possible uplink data slots for a minute. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 60). Uplink slots in a fra… |
| 1.3.6.1.4.1.161.19.3.1.12.1.15 | ScalarfrUtlLowEthInDiscards | read-only | current | Number of incoming ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.16 | ScalarfrUtlLowEthOutDiscards | read-only | current | Number of outgoing ethernet packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.17 | ScalarfrUtlLowRFInDiscards | read-only | current | Number of incoming radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.18 | ScalarfrUtlLowRFOutDiscards | read-only | current | Number of outgoing radio packets discarded in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.19 | ScalarfrUtlLowIntervalBwReqPercentage | read-only | current | Percentage of bandwidth request received in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.1.20 | ScalarfrUtlLowIntervalBwReqRx | read-only | current | Number of bandwidth request received in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.1.21 | ScalarfrUtlLowIntervalBwReqMissed | read-only | current | Number of bandwidth request missed in the last 1 minute. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.1.22 | ScalarfrUtlLowContentionSlots | read-only | current | Number of scheduled contention slots available in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.23 | ScalarfrUtlLowAvgDownlinkSlots | read-only | current | Average downlink data slots per frame in the last 1 minute. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.1.24 | ScalarfrUtlLowAvgUplinkSlots | read-only | current | Average uplink data slots per frame in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.25 | ScalarfrUtlLowAvgContentionSlots | read-only | current | Average contention slots per frame in the last 1 minute. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.1.26 | ScalarfrUtlLowMaxContentionSlots | read-only | current | Maximum possible contention slots for 1 minute. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a sec… |
| 1.3.6.1.4.1.161.19.3.1.12.1.27 | ScalarfrUtlLowDownlinkAckUtilization | read-only | current | Percentage of downlink Canopy MAC Acknowledgment utilization in the last 1 minute. |
| 1.3.6.1.4.1.161.19.3.1.12.1.28 | ScalarfrUtlLowDownlinkBcastMcastUtilization | read-only | current | Percentage of downlink Broadcast/Multicast utilization in the last 1 minute. |
| 1.3.6.1.4.1.161.19.3.1.12.1.29 | ScalarfrUtlLowMumimoDownlinkSectorUtilization | read-only | current | Percentage of MU-MIMO downlink Sector utilization in the last 1 minute. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.1.30 | ScalarfrUtlLowMumimoDownlinkMumimoUtilization | read-only | current | Percentage of MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.1.31 | ScalarfrUtlLowMumimoDownlinkSumimoUtilization | read-only | current | Percentage of SU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.1.32 | ScalarfrUtlLowMumimoDownlinkMultiplexingGain | read-only | current | MU-MIMO Multiplexing Gain in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.1.33 | ScalarfrUtlLowMumimoDownlinkAvgGroupSize | read-only | current | Average MU-MIMO Group Size in the last 1 minute. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.2 | NodewhispApsFrUtlStatsIntervalMedium | |||
| 1.3.6.1.4.1.161.19.3.1.12.2.1 | ScalarfrUtlMedTotalDownlinkUtilization | read-only | current | Percentage of total downlink utilization in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.2 | ScalarfrUtlMedTotalUplinkUtilization | read-only | current | Percentage of total uplink utilization in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.3 | ScalarfrUtlMedTotalDownlinkSlots | read-only | current | Total downlink data slots in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.4 | ScalarfrUtlMedDownlinkLowPrioSlots | read-only | current | Number of data slots used for downlink low priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.5 | ScalarfrUtlMedDownlinkHiPrioSlots | read-only | current | Number of data slots used for downlink high priority traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.6 | ScalarfrUtlMedDownlinkBcastSlots | read-only | current | Number of data slots used for downlink broadcast and multicast traffic in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.7 | ScalarfrUtlMedDownlinkAckSlots | read-only | current | Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.8 | ScalarfrUtlMedDownlinkCntlMsgSlots | read-only | current | Number of data slots used for downlink registration control messages in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.9 | ScalarfrUtlMedTotalUplinkSlots | read-only | current | Total uplink data slots in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.10 | ScalarfrUtlMedUplinkLowPrioSlots | read-only | current | Number of data slots used for uplink low priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.11 | ScalarfrUtlMedUplinkHiPrioSlots | read-only | current | Number of data slots used for uplink high priority traffic in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.12 | ScalarfrUtlMedUplinkAckSlots | read-only | current | Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.13 | ScalarfrUtlMedMaxDownlinkSlots | read-only | current | Maximum possible downlink data slots for 5 minutes. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 5 * 60 (seconds)). Do… |
| 1.3.6.1.4.1.161.19.3.1.12.2.14 | ScalarfrUtlMedMaxUplinkSlots | read-only | current | Maximum possible uplink data slots for 5 minutes. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 5 * 60(seconds)). Uplink … |
| 1.3.6.1.4.1.161.19.3.1.12.2.15 | ScalarfrUtlMedEthInDiscards | read-only | current | Number of incoming ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.16 | ScalarfrUtlMedEthOutDiscards | read-only | current | Number of outgoing ethernet packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.17 | ScalarfrUtlMedRFInDiscards | read-only | current | Number of incoming radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.18 | ScalarfrUtlMedRFOutDiscards | read-only | current | Number of outgoing radio packets discarded in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.19 | ScalarfrUtlMediumIntervalBwReqPercentage | read-only | current | Percentage of bandwidth request received in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.2.20 | ScalarfrUtlMediumIntervalBwReqRx | read-only | current | Number of bandwidth request received in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.2.21 | ScalarfrUtlMediumIntervalBwReqMissed | read-only | current | Number of bandwidth request missed in the last 5 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.2.22 | ScalarfrUtlMediumContentionSlots | read-only | current | Number of scheduled contention slots available in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.23 | ScalarfrUtlMediumAvgDownlinkSlots | read-only | current | Average downlink data slots per frame in the last 5 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.2.24 | ScalarfrUtlMediumAvgUplinkSlots | read-only | current | Average uplink data slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.25 | ScalarfrUtlMediumAvgContentionSlots | read-only | current | Average contention slots per frame in the last 5 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.2.26 | ScalarfrUtlMediumMaxContentionSlots | read-only | current | Maximum possible contention slots for 5 minutes. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a se… |
| 1.3.6.1.4.1.161.19.3.1.12.2.27 | ScalarfrUtlMedDownlinkAckUtilization | read-only | current | Percentage of downlink Canopy MAC Acknowledgment utilization in the last 5 minutes. |
| 1.3.6.1.4.1.161.19.3.1.12.2.28 | ScalarfrUtlMedDownlinkBcastMcastUtilization | read-only | current | Percentage of downlink Broadcast/Multicast utilization in the last 5 minutes. |
| 1.3.6.1.4.1.161.19.3.1.12.2.29 | ScalarfrUtlMedMumimoDownlinkSectorUtilization | read-only | current | Percentage of MU-MIMO downlink Sector utilization in the last 5 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.2.30 | ScalarfrUtlMedMumimoDownlinkMumimoUtilization | read-only | current | Percentage of MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.2.31 | ScalarfrUtlMedMumimoDownlinkSumimoUtilization | read-only | current | Percentage of SU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.2.32 | ScalarfrUtlMedMumimoDownlinkMultiplexingGain | read-only | current | MU-MIMO Multiplexing Gain in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.2.33 | ScalarfrUtlMedMumimoDownlinkAvgGroupSize | read-only | current | Average MU-MIMO Group Size in the last 5 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.3 | NodewhispApsFrUtlStatsIntervalHigh | |||
| 1.3.6.1.4.1.161.19.3.1.12.3.1 | ScalarfrUtlHighTotalDownlinkUtilization | read-only | current | Percentage of total downlink utilization in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.2 | ScalarfrUtlHighTotalUplinkUtilization | read-only | current | Percentage of total uplink utilization in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.3 | ScalarfrUtlHighTotalDownlinkSlots | read-only | current | Total downlink data slots in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.4 | ScalarfrUtlHighDownlinkLowPrioSlots | read-only | current | Number of data slots used for downlink low priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.5 | ScalarfrUtlHighDownlinkHiPrioSlots | read-only | current | Number of data slots used for downlink high priority traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.6 | ScalarfrUtlHighDownlinkBcastSlots | read-only | current | Number of data slots used for downlink broadcast and multicast traffic in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.7 | ScalarfrUtlHighDownlinkAckSlots | read-only | current | Number of data slots used for Downlink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.8 | ScalarfrUtlHighDownlinkCntlMsgSlots | read-only | current | Number of data slots used for downlink registration control messages in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.9 | ScalarfrUtlHighTotalUplinkSlots | read-only | current | Total uplink data slots in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.10 | ScalarfrUtlHighUplinkLowPrioSlots | read-only | current | Number of data slots used for uplink low priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.11 | ScalarfrUtlHighUplinkHiPrioSlots | read-only | current | Number of data slots used for uplink high priority traffic in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.12 | ScalarfrUtlHighUplinkAckSlots | read-only | current | Number of data slots used for Uplink Canopy MAC Acknowledgements in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.13 | ScalarfrUtlHighMaxDownlinkSlots | read-only | current | Maximum possible downlink data slots for 15 minutes. This is calculated as ((Downlink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). D… |
| 1.3.6.1.4.1.161.19.3.1.12.3.14 | ScalarfrUtlHighMaxUplinkSlots | read-only | current | Maximum possible uplink data slots for 15 minutes. This is calculated as ((Uplink slots in a frame) * (Number of frames in a second) * 15 * 60(seconds)). Uplin… |
| 1.3.6.1.4.1.161.19.3.1.12.3.15 | ScalarfrUtlHighEthInDiscards | read-only | current | Number of incoming ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.16 | ScalarfrUtlHighEthOutDiscards | read-only | current | Number of outgoing ethernet packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.17 | ScalarfrUtlHighRFInDiscards | read-only | current | Number of incoming radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.18 | ScalarfrUtlHighRFOutDiscards | read-only | current | Number of outgoing radio packets discarded in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.19 | ScalarfrUtlHighIntervalBwReqPercentage | read-only | current | Percentage of bandwidth request received in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.3.20 | ScalarfrUtlHighIntervalBwReqRx | read-only | current | Number of bandwidth request received in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.3.21 | ScalarfrUtlHighIntervalBwReqMissed | read-only | current | Number of bandwidth request missed in the last 15 minutes. Only supported for PMP 450 platform. PMP 430 SMs will not be included in this statistic. |
| 1.3.6.1.4.1.161.19.3.1.12.3.22 | ScalarfrUtlHighContentionSlots | read-only | current | Number of scheduled contention slots available in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.23 | ScalarfrUtlHighAvgDownlinkSlots | read-only | current | Average downlink data slots per frame in the last 15 minutes. Only supported for PMP and PTP 450 AP and Backhauls. |
| 1.3.6.1.4.1.161.19.3.1.12.3.24 | ScalarfrUtlHighAvgUplinkSlots | read-only | current | Average uplink data slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.25 | ScalarfrUtlHighAvgContentionSlots | read-only | current | Average contention slots per frame in the last 15 minutes. Only supported for PMP 450 AP platform. |
| 1.3.6.1.4.1.161.19.3.1.12.3.26 | ScalarfrUtlHighMaxContentionSlots | read-only | current | Maximum possible contention slots for 15 minutes. This is calculated as (((Uplink slots in a frame) + (Contention slots in a frame)) * (Number of frames in a s… |
| 1.3.6.1.4.1.161.19.3.1.12.3.27 | ScalarfrUtlHighDownlinkAckUtilization | read-only | current | Percentage of downlink Canopy MAC Acknowledgment utilization in the last 15 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.3.28 | ScalarfrUtlHighDownlinkBcastMcastUtilization | read-only | current | Percentage of downlink Broadcast/Multicast utilization in the last 15 minutes. |
| 1.3.6.1.4.1.161.19.3.1.12.3.29 | ScalarfrUtlHighMumimoDownlinkSectorUtilization | read-only | current | Percentage of MU-MIMO downlink Sector utilization in the last 15 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.3.30 | ScalarfrUtlHighMumimoDownlinkMumimoUtilization | read-only | current | Percentage of MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.3.31 | ScalarfrUtlHighMumimoDownlinkSumimoUtilization | read-only | current | Percentage of SU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.3.32 | ScalarfrUtlHighMumimoDownlinkMultiplexingGain | read-only | current | MU-MIMO Multiplexing Gain in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.3.33 | ScalarfrUtlHighMumimoDownlinkAvgGroupSize | read-only | current | Average MU-MIMO Group Size in the last 15 minutes. This value is scaled up by 100 (ie. 269 = 2.69). MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4 | TablewhispApsFrUtlStatsMumimoSpatialTable | not-accessible | current | MU-MIMO Spatial Utilization Metrics. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1 | RowwhispApsFrUtlStatsMumimoSpatialEntry | not-accessible | current | MU-MIMO Spatial Utilization Metrics. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.1 | ColumnfrUtlMumimoDownlinkUtilizationSfBin | read-only | current | Spatial Frequency Bin. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.2 | ColumnfrUtlMumimoDownlinkUtilizationSfRange | read-only | current | Spatial Frequency Range. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.3 | ColumnfrUtlMumimoDownlinkUtilizationAzimuth | read-only | current | Azimuth Ranges per Spatial Frequency bin. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.4 | ColumnfrUtlMumimoDownlinkUtilizationVcRange | read-only | current | VCs in Spatial Frequency Range. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.5 | ColumnfrUtlMumimoDownlinkInstantaneousUtilization | read-only | current | Instantanous MU-MIMO downlink utilization. This updates every 500ms. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.6 | ColumnfrUtlLowTotalMumimoDownlinkUtilization | read-only | current | Percentage of total MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.7 | ColumnfrUtlMedTotalMumimoDownlinkUtilization | read-only | current | Percentage of total MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.8 | ColumnfrUtlHighTotalMumimoDownlinkUtilization | read-only | current | Percentage of total MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.9 | ColumnfrUtlLowMaxMumimoDownlinkUtilization | read-only | current | Maximum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.10 | ColumnfrUtlMedMaxMumimoDownlinkUtilization | read-only | current | Maximum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.11 | ColumnfrUtlHighMaxMumimoDownlinkUtilization | read-only | current | Maximum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.12 | ColumnfrUtlLowMinMumimoDownlinkUtilization | read-only | current | Minimum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.13 | ColumnfrUtlMedMinMumimoDownlinkUtilization | read-only | current | Minimum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.4.1.14 | ColumnfrUtlHighMinMumimoDownlinkUtilization | read-only | current | Minimum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.5 | TablewhispApsFrUtlStatsMumimoDistributionTable | not-accessible | current | MU-MIMO Distribution Metrics. |
| 1.3.6.1.4.1.161.19.3.1.12.5.1 | RowwhispApsFrUtlStatsMumimoDistributionEntry | not-accessible | current | MU-MIMO Distribution Metrics. |
| 1.3.6.1.4.1.161.19.3.1.12.5.1.1 | ColumnfrUtlMumimoDownlinkDistributionIndex | read-only | current | MU-MIMO downlink Distribution Table Index. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.5.1.2 | ColumnfrUtlMumimoDownlinkDistributionGroup | read-only | current | MU-MIMO downlink Distribution Group. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.5.1.3 | ColumnfrUtlMumimoDownlinkDistributionVc | read-only | current | MU-MIMO downlink VC Distribution. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.12.5.1.4 | ColumnfrUtlMumimoDownlinkDistributionMedianSlotCount | read-only | current | MU-MIMO downlink Median Slot Count Distribution. MU-MIMO only. |
| 1.3.6.1.4.1.161.19.3.1.13 | NodewhispApsLQI | |||
| 1.3.6.1.4.1.161.19.3.1.13.1 | TablewhispApsLQILowInterval | not-accessible | current | Link Quality Indicator one minute interval table. |
| 1.3.6.1.4.1.161.19.3.1.13.1.1 | RowwhispApsLQILowIntervalEntry | not-accessible | current | Link Quality Indicator for one minute Interval entry. |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.1 | ColumnlqiLowLinkLUID | read-only | current | Logical User Identfication (LUID) number |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.2 | ColumnlqiLowLQI | read-only | current | Link Quality Indicator for one minute interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-registr… |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.3 | ColumnlqiLowDownlinkQualityIndex | read-only | current | Downlink Quality Index for one minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.4 | ColumnlqiLowDownlinkAverageActualRate | read-only | current | Downlink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.5 | ColumnlqiLowDownlinkExpectedRate | read-only | current | Downlink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.6 | ColumnlqiLowUplinkQualityIndex | read-only | current | Uplink Quality Index for one minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.7 | ColumnlqiLowUplinkAverageActualRate | read-only | current | Uplink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.8 | ColumnlqiLowUplinkExpectedRate | read-only | current | Uplink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.9 | ColumnlqiLowBeaconQualityIndex | read-only | current | Beacon Quality Index for one minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.10 | ColumnlqiLowBeaconPercent | read-only | current | Received beacon percentage for one minute interval |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.11 | ColumnlqiLowReRegQualityIndex | read-only | current | Beacon Quality Index for one minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.1.1.12 | ColumnlqiLowReRegCount | read-only | current | Re Registration count for one minute interval |
| 1.3.6.1.4.1.161.19.3.1.13.2 | TablewhispApsLQIMidInterval | not-accessible | current | Link Quality Indicator five minutes interval table. |
| 1.3.6.1.4.1.161.19.3.1.13.2.1 | RowwhispApsLQIMidIntervalEntry | not-accessible | current | Link Quality Indicator for five minutes interval entry. |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.1 | ColumnlqiMidLinkLUID | read-only | current | Logical User Identfication (LUID) number |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.2 | ColumnlqiMidLQI | read-only | current | Link Quality Indicator for five minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-regis… |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.3 | ColumnlqiMidDownlinkQualityIndex | read-only | current | Downlink Quality Index for five minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.4 | ColumnlqiMidDownlinkAverageActualRate | read-only | current | Downlink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.5 | ColumnlqiMidDownlinkExpectedRate | read-only | current | Downlink Expected Rate in tenths for five minute interval. eg: 80 is 8X |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.6 | ColumnlqiMidUplinkQualityIndex | read-only | current | Uplink Quality Index for five minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.7 | ColumnlqiMidUplinkAverageActualRate | read-only | current | Uplink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.8 | ColumnlqiMidUplinkExpectedRate | read-only | current | Uplink Expected Rate in tenths for five minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.9 | ColumnlqiMidBeaconPercent | read-only | current | Received beacon percent for five minute interval |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.10 | ColumnlqiMidBeaconQualityIndex | read-only | current | Beacon Quality Index for five minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.11 | ColumnlqiMidReRegCount | read-only | current | Re Registration count for five minute interval |
| 1.3.6.1.4.1.161.19.3.1.13.2.1.12 | ColumnlqiMidReRegQualityIndex | read-only | current | Beacon Quality Index for five minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.3 | TablewhispApsLQIHighInterval | not-accessible | current | Link Quality Indicator fifteen minutes interval table. |
| 1.3.6.1.4.1.161.19.3.1.13.3.1 | RowwhispApsLQIHighIntervalEntry | not-accessible | current | Link Quality Indicator for fifteen minutes interval entry. |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.1 | ColumnlqiHighLinkLUID | read-only | current | Logical User Identfication (LUID) number |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.2 | ColumnlqiHighLQI | read-only | current | Link Quality Indicator for fifteen minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-re… |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.3 | ColumnlqiHighDownlinkQualityIndex | read-only | current | Downlink Quality Index for fifteen minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.4 | ColumnlqiHighDownlinkAverageActualRate | read-only | current | Downlink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.5 | ColumnlqiHighDownlinkExpectedRate | read-only | current | Downlink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interfere… |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.6 | ColumnlqiHighUplinkQualityIndex | read-only | current | Uplink Quality Index for fifteen minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.7 | ColumnlqiHighUplinkAverageActualRate | read-only | current | Uplink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.8 | ColumnlqiHighUplinkExpectedRate | read-only | current | Uplink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interferenc… |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.9 | ColumnlqiHighBeaconQualityIndex | read-only | current | Beacon Quality Index for fifteen minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.10 | ColumnlqiHighBeaconPercent | read-only | current | Received beacon percent for fifteen minute interval |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.11 | ColumnlqiHighReRegQualityIndex | read-only | current | Beacon Quality Index for fifteen minute interval in percentage. 100% is best quality |
| 1.3.6.1.4.1.161.19.3.1.13.3.1.12 | ColumnlqiHighReRegCount | read-only | current | Re Registration count for fifteen minute interval |