WLSX-HA-MIB
63 objects
This MIB module defines MIB objects which provide information about High Availability on Aruba controller.
Imported Objects
| ARUBA-MIB | wlsxEnterpriseMibModules |
| ARUBA-TC | ArubaEnableValue ArubaHaConnectivityStatus ArubaHaRole |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE snmpModules Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus StorageType TAddress TDomain TestAndIncr TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14823.2.2.1.20 | IdentitywlsxHaMIB | This MIB module defines MIB objects which provide information about High Availability on Aruba controller. | ||
| 1.3.6.1.4.1.14823.2.2.1.20.1 | NodewlsxHighAvalabilityInfoGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.20.1.1 | TablewlsxHighAvalabilityConfigTable | not-accessible | current | This Table lists High Avalability configuration on the Aruba controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1 | RowwlsxHighAvalabilityConfigEntry | not-accessible | current | HA profile config entry |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.1 | ColumnhaProfileName | not-accessible | current | The name of the HA profile. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.2 | ColumnhaMembership | read-only | current | The name of the HA profile enabled. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.3 | ColumnhaState | read-only | current | The HA state. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.4 | ColumnhaRole | read-only | current | The HA role of the controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.5 | ColumnhaPreemption | read-only | current | HA preemption. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.6 | ColumnhaOversubscription | read-only | current | Standby capacity extension. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.7 | ColumnhaStateSync | read-only | current | The HA state sync. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.8 | ColumnhaPresharedKey | read-only | current | The IPSec key for statesync. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.9 | ColumnhaIntercontrollerHbt | read-only | current | The state of intercontroller heart beat. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.10 | ColumnhaHbtThreshold | read-only | current | Intercontroller hbt threshold above which it can trigger HA failover. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.1.1.11 | ColumnhaHbtInterval | read-only | current | The frequency of inter controller heart beat. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.2 | TablewlsxHighAvalabilityApTable | not-accessible | current | This Table lists High Avalability AP counts on the Aruba controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.2.1 | RowwlsxHighAvalabilityApEntry | not-accessible | current | HA AP entry |
| 1.3.6.1.4.1.14823.2.2.1.20.1.2.1.1 | ColumnhaActiveAPs | read-only | current | The number of active APs. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.2.1.2 | ColumnhaStandbyAPs | read-only | current | The number of standby APs. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.2.1.3 | ColumnhaTotalAPs | read-only | current | The total number of APs. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3 | TablewlsxIntercontrollerHbtTable | not-accessible | current | This Table lists inter controller heart beat status. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1 | RowwlsxIntercontrollerHbtEntry | not-accessible | current | HA hbt entry |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.1 | ColumnhaActiveCtrl | not-accessible | current | The IP address of the actve controller(Key). |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.2 | ColumnhaActiveCtrlIp | read-only | current | The IP address of the actve controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.3 | ColumnhaReferenceCnt | read-only | current | The number of standby APs. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.4 | ColumnhaTotalHbtRequestsSent | read-only | current | The total number of hbt requests sent. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.5 | ColumnhaTotalHbtResponsesRcvd | read-only | current | The total number of heart beat responses received. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.6 | ColumnhaLastMissedHbtCnt | read-only | current | The number of heart beat last missed. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.3.1.7 | ColumnhaLastHbtMissedTime | read-only | current | The timestamp of last missed hbt. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4 | TablewlsxStateSyncTable | not-accessible | current | This Table lists the counts of active/replicated pmk-cache and key-cache entries related to HA state sync. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4.1 | RowwlsxStateSyncEntry | not-accessible | current | HA state sync entry |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.1 | ColumnhaActivePmkCacheEntries | read-only | current | The number of active pmk cache entries. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.2 | ColumnhaReplicatedPmkCacheEntries | read-only | current | The number of replicated pmk cache entries. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.3 | ColumnhaTotalPmkCacheEntries | read-only | current | The total number of pmk cache entries. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.4 | ColumnhaActiveKeyCacheEntries | read-only | current | The number of active key cache entries. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.5 | ColumnhaReplicatedKeyCacheEntries | read-only | current | The nuber of replicated key cache entries. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.4.1.6 | ColumnhaTotalKeyCacheEntries | read-only | current | The total number of key cache entries. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.5 | TablewlsxHighAvalabilityTunnelTable | not-accessible | current | This table lists the total number of High Availability acitve/standby tunnels and AP heart beat tunnels on the Aruba controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.5.1 | RowwlsxHighAvalabilityTunnelEntry | not-accessible | current | HA tunnel entry |
| 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.1 | ColumnhaActiveVapTunnels | read-only | current | The number of active per VAP GRE tunnels. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.2 | ColumnhaStandbyVapTunnels | read-only | current | The number of standby per VAP GRE tunnels. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.3 | ColumnhaTotalVapTunnels | read-only | current | The total number of per VAP GRE tunnels. |
| 1.3.6.1.4.1.14823.2.2.1.20.1.5.1.4 | ColumnhaAPHbtTunnels | read-only | current | The number of AP hbt GRE tunnels. |
| 1.3.6.1.4.1.14823.2.2.1.20.2 | NodewlsxHighAvalabilityTraps | |||
| 1.3.6.1.4.1.14823.2.2.1.20.2.1 | NodewlsxHaTrapObjectsGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.1 | ScalarwlsxHaV4Status | read-only | current | This object is used in the traps to indicate the IPv4 status of High Availability. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.2 | ScalarwlsxHaV4Role | read-only | current | This object is used in the traps to indicate the IPv4 HA role of the controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.3 | ScalarwlsxHaV6Status | read-only | current | This object is used in the traps to indicate the IPv6 status of High Availability. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.4 | ScalarwlsxHaV6Role | read-only | current | This object is used in the traps to indicate the IPv6 HA role of the controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.5 | ScalarwlsxHaAPName | read-only | current | This object is used in the traps to indicate name of an AP. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.6 | ScalarwlsxHaActiveControllerIp | read-only | current | This object is used in the traps to indicate the active controller IP address. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.7 | ScalarwlsxHaStandbyControllerIp | read-only | current | This object is used in the traps to indicate the standby controller IP address. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.8 | ScalarwlsxTrapHaConnectivityStatus | read-only | current | This object is used in the traps to indicate standby controller connectivity status of an AP. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.9 | ScalarwlsxTrapHaIntercontrollerHbtMissCnt | read-only | current | This object is used in the traps to indicate the number of intercontroller heart beat miss. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.10 | ScalarwlsxTrapHaHbtMissTimeStamp | read-only | current | This object is used in the traps to indicate the time stamp of intercontroller heart beat miss. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.1.11 | ScalarwlsxTrapHaStandbyApCnt | read-only | current | This object is used in the traps to indicate the number of standby APs on standby controller. |
| 1.3.6.1.4.1.14823.2.2.1.20.2.2 | NodewlsxHaTrapDefinitionGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.20.2.2.1 | NotificationwlsxHaState | current | This trap indicates that HA state has changed. | |
| 1.3.6.1.4.1.14823.2.2.1.20.2.2.2 | NotificationwlsxHaStandbyIpSentFailed | current | This trap indicates that standby IP is sent to an AP failed | |
| 1.3.6.1.4.1.14823.2.2.1.20.2.2.3 | NotificationwlsxHaStandbyConnectivityState | current | This trap indicates the standby connectivity status for an AP. | |
| 1.3.6.1.4.1.14823.2.2.1.20.2.2.4 | NotificationwlsxHaIntercontrollerHbtMiss | current | This trap indicates around half of the threshold intercontroller hearbeat missed with serving controller. | |
| 1.3.6.1.4.1.14823.2.2.1.20.2.2.5 | NotificationwlsxHaFailoverTrigger | current | This trap indicates that standby controller has triggered HA failover to aps belonging to a particular serving controller with which intercontroller heart beat… | |
| 1.3.6.1.4.1.14823.2.2.1.20.2.2.6 | NotificationwlsxHaFailoverRequestFromAp | current | This trap indicates that an ap sent failover request to the controller. This could be because of AP missing hbt with serving controller, on receiving failover … |