WLSX-IFEXT-MIB
81 objects
This MIB module defines MIB objects which provide System level information about the Aruba controller.
Imported Objects
| ARUBA-MIB | wlsxEnterpriseMibModules |
| ARUBA-TC | ArubaDot1dState ArubaEnableValue ArubaIfType ArubaOperStateValue ArubaPoeState ArubaPortDuplex ArubaPortMode ArubaPortSpeed ArubaPortType ArubaVlanValidRange |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE snmpModules |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus StorageType TAddress TDomain TestAndIncr TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14823.2.2.1.3 | IdentitywlsxIfExtMIB | This MIB module defines MIB objects which provide System level information about the Aruba controller. | ||
| 1.3.6.1.4.1.14823.2.2.1.3.1 | NodewlsxIfExtGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.3.1.1 | TablewlsxIfExtPortTable | not-accessible | deprecated | The table of processors contained by the controller. This table is deprecated in favor of wlsxIfExtNPortTable. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1 | RowwlsxIfExtPortEntry | not-accessible | deprecated | An entry for one processor contained by the controller. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.1 | ColumnifExtSlotNumber | not-accessible | deprecated | This object represents the Physical Slot of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.2 | ColumnifExtPortNumber | not-accessible | deprecated | This object represents the Physical Port of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.3 | ColumnifExtPortIfIndex | read-only | deprecated | This is the ifIndex in ifTable, representing this slot and port. This object is deprecated in favour of ifExtNPortIfIndex. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.4 | ColumnifExtAdminState | read-write | deprecated | The desired state of the interface. This object is deprecated in favour of ifExtNAdminState. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.5 | ColumnifExtOperState | read-only | deprecated | The current operational state of the interface. This object is deprecated in favour of ifExtNOperState. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.6 | ColumnifExtPoeState | read-write | deprecated | The current state of the power over ethernet capability of the port. This object is deprecated in favour of ifExtNPoeState. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.7 | ColumnifExtIsTrusted | read-write | deprecated | The object indicates if the port is used in the trusted side of the network or the untrusted side. This object is deprecated in favour of ifExtNIsTrusted. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.8 | ColumnifExtDot1DState | read-write | deprecated | Current Dot1d state of the Port. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtND… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.9 | ColumnifExtMode | read-write | deprecated | This object indicates if the port is in a Trunk mode or access mode. This object provides default switch port value if ifExtIsMonitoring is true(1). This objec… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.10 | ColumnifExtAccessVlanId | read-write | deprecated | The VLAN Id when the port is in Access Mode. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favou… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.11 | ColumnifExtTrunkNativeVlanId | read-write | deprecated | The native VLAN Id of the Port, when the port is in dot1q mode. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is … |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.12 | ColumnifExtTrunkIsAllowedAll | read-write | deprecated | When the mode of the port is Trunk, this Object indicates if the port is part of all the configured Vlans. This object provides default switch port value if if… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.13 | ColumnifExtTrunkAllowedVlanList | read-write | deprecated | A string of octets containing one bit per VLAN for a total of 4096 VLANs in the management domain. The most significant bit of the octet string is the lowest v… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.14 | ColumnifExtIngressACLName | read-write | deprecated | This object represents the Ingress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. This object is deprecate… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.15 | ColumnifExtEgressACLName | read-write | deprecated | This object represents the Egress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. This object is deprecated… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.16 | ColumnifExtSessionACLName | read-write | deprecated | This object represents the Session ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. This object is deprecate… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.17 | ColumnifExtXsecVlan | read-write | deprecated | This object indicates if the port is an Xsec Port. This object is deprecated in favour of ifExtNXsecVlan. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.18 | ColumnifExtIsMonitoring | read-write | deprecated | This object indicates if the port is used for Port monitoring. When the value of this object is true(1), then below objects provide default switch port values … |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.19 | ColumnifExtIsMux | read-write | deprecated | This object indicates if the port is used as a MUX Port. This object is deprecated in favour of ifExtNIsMux. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.20 | ColumnifExtUserSlotNumber | read-only | deprecated | The user-visible (zero-based) slot number. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.21 | ColumnifExtUserPortNumber | read-only | deprecated | The user-visible (zero-based) port number. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.22 | ColumnifExtPortSpeed | read-only | deprecated | Speed of the Port. This object is deprecated in favour of ifExtNPortSpeed. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.23 | ColumnifExtPortDuplex | read-only | deprecated | Duplexity of the Port. This object is deprecated in favour of ifExtNPortDuplex. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.24 | ColumnifExtPortType | read-only | deprecated | Type of the Port. This object is deprecated in favour of ifExtNPortType. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.25 | ColumnifExtDescr | read-only | deprecated | Port Description. This object is deprecated in favour of ifExtNDescr. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.26 | ColumnifExtUserModuleNumber | read-only | deprecated | The user-visible (zero-based) module number. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.2 | TablewlsxIfExtVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.14823.2.2.1.3.1.2.1 | RowwlsxIfExtVlanEntry | not-accessible | current | An entry for one processor contained by the controller. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.2.1.1 | ColumnifExtVlanId | not-accessible | current | This object represents the VLAN Id of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.2.1.2 | ColumnifExtVlanName | read-create | current | Name of the VLAN. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.2.1.3 | ColumnifExtVlanStatus | read-create | current | A Row status Object used to create/modify the row. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.3 | TablewlsxIfExtVlanMemberTable | not-accessible | current | |
| 1.3.6.1.4.1.14823.2.2.1.3.1.3.1 | RowwlsxIfExtVlanMemberEntry | not-accessible | current | An entry for one processor contained by the controller. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.3.1.1 | ColumnifExtVlanMemberStatus | read-create | current | A Row status Object used to create/modify and indicate the status row. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.3.1.2 | ColumnifExtVlanMemberSlot | read-only | current | The slot index of the slot referred to by this row (1-based). |
| 1.3.6.1.4.1.14823.2.2.1.3.1.3.1.3 | ColumnifExtVlanMemberPort | read-only | current | The slot index of the slot referred to by this row (1-based). |
| 1.3.6.1.4.1.14823.2.2.1.3.1.3.1.4 | ColumnifExtVlanMemberType | read-only | current | The VLAN member type. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4 | TablewlsxIfExtVlanInterfaceTable | not-accessible | current | |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1 | RowwlsxIfExtVlanInterfaceEntry | not-accessible | current | An entry for one processor contained by the controller. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.1 | ColumnifExtVlanInterfaceIfIndex | read-create | current | This is the ifIndex in ifTable, representing VLAN Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.2 | ColumnifExtVlanInterfaceDescription | read-create | current | This Object indicates the description of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.3 | ColumnifExtVlanInterfaceBWContract | read-create | current | This Object indicates the Bandwidth contract on the interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.4 | ColumnifExtVlanInterfaceAdminState | read-create | current | This Object indicates the administrative state of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.5 | ColumnifExtVlanInterfaceOperState | read-create | current | This Object indicates the operational state of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.6 | ColumnifExtVlanInterfaceIpAddress | read-create | current | This Object indicates the IP Address of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.7 | ColumnifExtVlanInterfaceIpMask | read-create | current | This Object indicates the subnet mask of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.8 | ColumnifExtVlanInterfaceIsLocalArp | read-create | current | This Object indicates if the Local Arp is set on the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.9 | ColumnifExtVlanInterfaceStatus | read-create | current | A Row status Object used to create/modify and indicate the status row. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.10 | ColumnifExtVlanInterfaceIpRouting | read-create | current | This Object indicates if the IP routing is set on the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.11 | ColumnifExtVlanInterfaceIpNatInside | read-create | current | This Object indicates if the IP nat inside is set on the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.4.1.12 | ColumnifExtVlanInterfaceIpIgmpSnooping | read-create | current | This Object indicates if the IP IGMP snooping is set on the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5 | TablewlsxIfExtNPortTable | not-accessible | current | The table of interface details. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1 | RowwlsxIfExtNPortEntry | not-accessible | current | An entry in wlsxIfExtNPortTable. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.1 | ColumnifExtNSlotNumber | not-accessible | current | This object represents the user-visible (zero-based) Physical Slot of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.2 | ColumnifExtNModuleNumber | not-accessible | current | This object represents the user-visible (zero-based) Physical Module of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.3 | ColumnifExtNPortNumber | not-accessible | current | This object represents the user-visible (zero-based) Physical Port of the Interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.4 | ColumnifExtNPortIfIndex | read-only | current | This is the ifIndex in ifTable, representing this slot, module and port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.5 | ColumnifExtNAdminState | read-write | current | The desired state of the interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.6 | ColumnifExtNOperState | read-only | current | The current operational state of the interface. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.7 | ColumnifExtNPoeState | read-write | current | The current state of the power over ethernet capability of the port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.8 | ColumnifExtNIsTrusted | read-write | current | The object indicates if the port is used in the trusted side of the network or the untrusted side. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.9 | ColumnifExtNDot1DState | read-write | current | Current Dot1d state of the Port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.10 | ColumnifExtNMode | read-write | current | This object indicates if the port is in a Trunk mode or access mode. This object provides default switch port value if ifExtIsMonitoring is true(1). |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.11 | ColumnifExtNAccessVlanId | read-write | current | The VLAN Id when the port is in Access Mode. This object provides default switch port value if ifExtIsMonitoring is true(1). |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.12 | ColumnifExtNTrunkNativeVlanId | read-write | current | The native VLAN Id of the Port, when the port is in dot1q mode. This object provides default switch port value if ifExtIsMonitoring is true(1). |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.13 | ColumnifExtNTrunkIsAllowedAll | read-write | current | When the mode of the port is Trunk, this Object indicates if the port is part of all the configured Vlans. This object provides default switch port value if if… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.14 | ColumnifExtNTrunkAllowedVlanList | read-write | current | A string of octets containing one bit per VLAN for a total of 4096 VLANs in the management domain. The most significant bit of the octet string is the lowest v… |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.15 | ColumnifExtNIngressACLName | read-write | current | This object represents the Ingress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.16 | ColumnifExtNEgressACLName | read-write | current | This object represents the Egress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.17 | ColumnifExtNSessionACLName | read-write | current | This object represents the Session ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.18 | ColumnifExtNXsecVlan | read-write | current | This object indicates if the port is an Xsec Port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.19 | ColumnifExtNIsMonitoring | read-write | current | This object indicates if the port is used for Port monitoring. When the value of this object is true(1), then below objects provide default switch port values … |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.20 | ColumnifExtNIsMux | read-write | current | This object indicates if the port is used as a MUX Port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.21 | ColumnifExtNPortSpeed | read-only | current | Speed of the Port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.22 | ColumnifExtNPortDuplex | read-only | current | Duplexity of the Port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.23 | ColumnifExtNPortType | read-only | current | Type of the Port. |
| 1.3.6.1.4.1.14823.2.2.1.3.1.5.1.24 | ColumnifExtNDescr | read-only | current | Port Description. |