WLSX-WLAN-MIB
476 objects
This MIB module defines MIB objects which provide information about the Wireless Management System (WMS) in the Aruba Controller.
Imported Objects
| ARUBA-MIB | wlsxEnterpriseMibModules |
| ARUBA-TC | ArubaAccessPointMode ArubaActiveState ArubaAntennaSetting ArubaAPStatus ArubaAuthenticationMethods ArubaEnableValue ArubaEncryptionMethods ArubaEnet1Mode ArubaFrameType ArubaHTExtChannel ArubaHTMode ArubaMeshRole ArubaMonitorMode ArubaPhyType ArubaPortSpeed ArubaRogueApType ArubaUnprovisionedStatus ArubaVlanValidRange ArubaVoipProtocolType |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE snmpModules Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus StorageType TAddress TDomain TestAndIncr TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14823.2.2.1.5 | IdentitywlsxWlanMIB | This MIB module defines MIB objects which provide information about the Wireless Management System (WMS) in the Aruba Controller. | ||
| 1.3.6.1.4.1.14823.2.2.1.5.1 | NodewlsxWlanConfigGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.1.1 | NodewlsxSSIDConfigGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1 | TablewlsxSSIDConfigTable | not-accessible | current | This Table lists the configuration of the SSID. Note: Currently, this table doesn't return any data. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1 | RowwlsxSSIDConfigEntry | not-accessible | current | AP Configuration Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.1 | ColumnwlanESSIDIndex | not-accessible | current | This attribute indicates the index of ESSID. We support up to 16 ESSIDs. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.2 | ColumnwlanSSIDConfigHideSSID | read-only | current | This attribute indicates if SSID is hidden or not. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.3 | ColumnwlanSSIDConfigNumStaAllowed | read-only | current | This attribute indicates the maximum number of stations that are allowed to access into the network. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.4 | ColumnwlanSSIDConfigWmmBeDscp | read-only | current | This attribute indicates the QoS priority of best-effort service. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.5 | ColumnwlanSSIDConfigWmmBkDscp | read-only | current | This attribute indicates the QoS priority of background service. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.6 | ColumnwlanSSIDConfigWmmViDscp | read-only | current | This attribute indicates the QoS priority of video service. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.1.1.1.7 | ColumnwlanSSIDConfigWmmVoDscp | read-only | current | This attribute indicates the QoS priority of voice service. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.2 | NodewlsxAPConfigGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.1.2.1 | TablewlsxAPConfigTable | not-accessible | current | This Table lists the configuration of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.2.1.1 | RowwlsxAPConfigEntry | not-accessible | current | AP Configuration Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.1.2.1.1.1 | ColumnwlanAPConfigNetmask | read-only | current | The netmask of AP IP Address. |
| 1.3.6.1.4.1.14823.2.2.1.5.1.2.1.1.2 | ColumnwlanAPConfigGateway | read-only | current | The gateway of the AP. |
| 1.3.6.1.4.1.14823.2.2.1.5.2 | NodewlsxWlanStateGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.2.1 | NodewlsxWlanAccessPointInfoGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.1 | ScalarwlsxWlanTotalNumAccessPoints | read-only | current | Total Number of Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.2 | ScalarwlsxWlanTotalNumStationsAssociated | read-only | current | Total Number of Stations Associated to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.3 | TablewlsxWlanAPGroupTable | not-accessible | current | This Table lists all the Access Points Groups configured in the Aruba controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1 | RowwlsxWlanAPGroupEntry | not-accessible | current | AP Group Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.1 | ColumnwlanAPGroup | not-accessible | current | The name of an AP group |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.2 | ColumnwlanAPNumAps | read-only | current | The number of APs in the AP Group |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4 | TablewlsxWlanAPTable | not-accessible | current | This table lists all the Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1 | RowwlsxWlanAPEntry | not-accessible | current | Access Point Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.1 | ColumnwlanAPMacAddress | not-accessible | current | Ethernet MAC Address of the Access Point |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.2 | ColumnwlanAPIpAddress | read-only | current | IP Address of the Access Point |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.3 | ColumnwlanAPName | read-write | current | Host name of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.4 | ColumnwlanAPGroupName | read-write | current | Group Name of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 | ColumnwlanAPModel | read-only | current | Sys OID of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 | ColumnwlanAPSerialNumber | read-only | current | Serial Number of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 | ColumnwlanAPdot11aAntennaGain | read-only | current | Configured antenna gain for 'A' Radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 | ColumnwlanAPdot11gAntennaGain | read-only | current | Configured antenna gain for 'G' Radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 | ColumnwlanAPNumRadios | read-only | current | Number of Radios in the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10 | ColumnwlanAPEnet1Mode | read-only | current | Enet1 Mode of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.11 | ColumnwlanAPIpsecMode | read-only | current | IPSEC Mode of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.12 | ColumnwlanAPUpTime | read-only | current | Time (in hundredths of seconds) since the last time the Access Point bootstrapped with the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.13 | ColumnwlanAPModelName | read-only | current | Model name of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.14 | ColumnwlanAPLocation | read-only | current | Location of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.15 | ColumnwlanAPBuilding | read-only | current | AP Building Number. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.16 | ColumnwlanAPFloor | read-only | current | AP Floor Number. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.17 | ColumnwlanAPLoc | read-only | current | AP Location. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.18 | ColumnwlanAPExternalAntenna | read-only | current | AP Antenna Status. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.19 | ColumnwlanAPStatus | read-only | current | AP Status. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.20 | ColumnwlanAPNumBootstraps | read-only | current | Number of times the AP has bootstrapped with the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.21 | ColumnwlanAPNumReboots | read-only | current | Number of times the AP has rebooted. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.22 | ColumnwlanAPUnprovisioned | read-only | current | Indicates whether the AP is unprovisioned due to lack of antenna gain or location code settings. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.23 | ColumnwlanAPMonitorMode | read-only | current | Indicates whether any radio on this AP is acting as an air monitor. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.24 | ColumnwlanAPFQLNBuilding | read-only | current | The building component of the AP's FQLN. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.25 | ColumnwlanAPFQLNFloor | read-only | current | The floor component of the AP's FQLN. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.26 | ColumnwlanAPFQLN | read-write | current | The AP's Fully Qualified Location Name (FQLN). |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.27 | ColumnwlanAPFQLNCampus | read-only | current | The campus component of the AP's FQLN. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.28 | ColumnwlanAPLongitude | read-write | current | Longitude of the AP. Signed floating-point value. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.29 | ColumnwlanAPLatitude | read-write | current | Latitude of the AP. Signed floating-point value. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.30 | ColumnwlanAPAltitude | read-write | current | Altitude of the AP. Signed floating-point value. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.31 | ColumnwlanAPMeshRole | read-write | current | AP Mesh role |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.32 | ColumnwlanAPSysLocation | read-only | current | AP sysLocation |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.33 | ColumnwlanAPHwVersion | read-only | current | Hardware version of the AP. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.34 | ColumnwlanAPSwVersion | read-only | current | Software version of the AP. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.35 | ColumnwlanAPNumWarmReboots | read-only | current | Number of times the AP has warm-rebooted. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.36 | ColumnwlanAPOuterIpAddress | read-only | current | Outer IP Address of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.37 | ColumnwlanAPRemoteLanIpAddress | read-only | current | LAN IP Address of the Remote Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.38 | ColumnwlanAPActiveUplink | read-only | current | Uplink of the RAP(Ethernet or USB). |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.39 | ColumnwlanAPSwitchIpAddress | read-only | current | Access points' Serving Controller's IP Address. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.40 | ColumnwlanAPStandbyIpAddress | read-only | current | Access points' Standby Controller's IP Address. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.41 | ColumnwlanAPConnectedAsStandby | read-only | current | Access point connected as active/standby. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.42 | ColumnwlanAPServiceTag | read-only | current | Access point service tag. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.43 | ColumnwlanAPConnectedAsDatazone | read-only | current | This object indicate this AP comes from datazone(1-4) or primary zone(0) |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.44 | ColumnwlanAPIpv6Address | read-only | current | IPv6 Address of the Access Point |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.45 | ColumnwlanAPFlexRadioMode | read-only | current | Flex Radio Operating Mode |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.46 | ColumnwlanAPdot11aAntennaGain10x | read-only | current | Configured antenna gain for 'A' Radio (antennaGain*10) |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.47 | ColumnwlanAPdot11gAntennaGain10x | read-only | current | Configured antenna gain for 'G' Radio (antennaGain*10) |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.48 | ColumnwlanAPDual5GMode | read-only | current | Dual5GHz Operating Mode |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.49 | ColumnwlanAPActiveIpAddress | read-only | current | IPv4 or IPv6 Address of the Access Point |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.50 | ColumnwlanAPSplit5GMode | read-only | current | Split 5GHz Operating Mode |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.51 | ColumnwlanAPOuterIpv6Address | read-only | current | Outer IPv6 Address of the Access Point |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.52 | ColumnwlanAPRemoteLanIpv6Address | read-only | current | LAN IPv6 Address of the Remote Access Point |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5 | TablewlsxWlanRadioTable | not-accessible | current | This table lists all the radios known to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1 | RowwlsxWlanRadioEntry | not-accessible | current | AP Radio Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.1 | ColumnwlanAPRadioNumber | not-accessible | current | The radio number |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.2 | ColumnwlanAPRadioType | read-write | current | Type of the Radio |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.3 | ColumnwlanAPRadioChannel | read-only | current | The channel the radio is currently operating on. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.4 | ColumnwlanAPRadioTransmitPower | read-only | current | The current power level of the radio. (Transmitted as txpwr*2) |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.5 | ColumnwlanAPRadioMode | read-only | current | The Mode in which the radio is operating. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.6 | ColumnwlanAPRadioUtilization | read-only | current | The Utilization of the radio as a percentage of the total capacity. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.7 | ColumnwlanAPRadioNumAssociatedClients | read-only | current | The number of Clients associated to this radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.8 | ColumnwlanAPRadioNumMonitoredClients | read-only | current | The number of Clients this Radio is monitoring. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.9 | ColumnwlanAPRadioNumActiveBSSIDs | read-only | current | The number of active BSSIDs on this Radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.10 | ColumnwlanAPRadioNumMonitoredBSSIDs | read-only | current | The number of AP BSSIDs this radio is monitoring. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.11 | ColumnwlanAPRadioBearing | read-write | current | Antenna Bearing in degrees from True North. Unsigned floating-point value. Range: 0-360. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.12 | ColumnwlanAPRadioTiltAngle | read-write | current | Tilt angle of antenna in degrees. -ve for downtilt, +ve for uptilt. Signed floating-point value. Range: -90 to +90. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.13 | ColumnwlanAPRadioHTMode | read-only | current | The HT mode of the radio, if any. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.14 | ColumnwlanAPRadioHTExtChannel | read-only | current | Indicates the offset of the extension channel, if any. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.15 | ColumnwlanAPRadioHTChannel | read-write | current | A display string indicating the current channel. If wlanAPRadioHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or … |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.16 | ColumnwlanAPRadioAPName | read-write | current | Name of the AP the radio belongs to |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.17 | ColumnwlanAPRadioTransmitPower10x | read-only | current | The current power level of the radio. (Transmitted as txpwr*10) |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.18 | ColumnwlanAPRadioSecChannel | read-only | current | The secondary channel when operating in 80+80Mhz bandwidth |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7 | TablewlsxWlanAPBssidTable | not-accessible | current | This table lists all the BSSIDs active on this controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1 | RowwlsxWlanAPBssidEntry | not-accessible | current | BSSID Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.1 | ColumnwlanAPBSSID | not-accessible | current | The MAC address of the Access Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.2 | ColumnwlanAPESSID | read-only | current | ESSID this BSSID is advertising. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.3 | ColumnwlanAPBssidSlot | read-only | current | Slot to which the Access Point is connected. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.4 | ColumnwlanAPBssidPort | read-only | current | Port to which the Access Point is connected. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.5 | ColumnwlanAPBssidPhyType | read-only | current | Physical Layer Protocol support of the AP. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.6 | ColumnwlanAPBssidRogueType | read-only | current | The type of the Rogue. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.7 | ColumnwlanAPBssidMode | read-only | current | Indicates whether the Access point is an Air Monitor or regular AP or Mesh Portal or Mesh Point. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.8 | ColumnwlanAPBssidChannel | read-only | deprecated | The current operating channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.9 | ColumnwlanAPBssidUpTime | read-only | current | Time (in hundredths of seconds) since the tunnel was created between the access point and controller |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.10 | ColumnwlanAPBssidInactiveTime | read-only | current | Time (in hundredths of seconds) since any activity took place on the BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.11 | ColumnwlanAPBssidLoadBalancing | read-only | current | Indicates whether load balancing is enabled or not. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.12 | ColumnwlanAPBssidNumAssociatedStations | read-only | current | Indicates the number of stations associated to this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.13 | ColumnwlanAPBssidAPMacAddress | read-only | current | Indicates the Access Point to which this BSSID belongs. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.14 | ColumnwlanAPBssidPhyNumber | read-only | current | Indicates the radio number to which this BSSID belongs. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.15 | ColumnwlanAPBssidHTMode | read-only | current | Indicates the HT mode of this BSSID, if any. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.16 | ColumnwlanAPBssidHTExtChannel | read-only | current | Indicates the offset of the 40MHz extension channel, if any. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.17 | ColumnwlanAPBssidHTChannel | read-only | current | A display string indicating the current channel. If wlanAPBssidHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or … |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.18 | ColumnwlanAPBssidSnr | read-only | current | Indicates the Signal Noise Ratio of this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.19 | ColumnwlanAPBssidChannelV2 | read-only | current | The current operating channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.20 | ColumnwlanAPBssidSecChannel | read-only | current | The secondary channel when operating in 80+80MHz channel bandwidth. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.8 | TablewlsxWlanESSIDTable | not-accessible | current | This Table lists all the ESSIDs advertised by this controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1 | RowwlsxWlanESSIDEntry | not-accessible | current | ESSID Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.1 | ColumnwlanESSID | not-accessible | current | The ESSID being advertised. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.2 | ColumnwlanESSIDNumStations | read-only | current | The number of stations connected to this ESSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.3 | ColumnwlanESSIDNumAccessPointsUp | read-only | current | The number of APs currently advertising this ESSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.4 | ColumnwlanESSIDNumAccessPointsDown | read-only | current | The number of APs configured to advertise this ESSID that are not currently operational. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.5 | ColumnwlanESSIDEncryptionType | read-only | current | The encryption methods supported on this ESSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.9 | TablewlsxWlanESSIDVlanPoolTable | not-accessible | current | This Table lists all the VLANs associated with this ESSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1 | RowwlsxWlanESSIDVlanPoolEntry | not-accessible | current | ESSID Vlan Pool Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.1 | ColumnwlanESSIDVlanId | not-accessible | current | VLAN which is part of the VLAN pool for this ESSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.2 | ColumnwlanESSIDVlanPoolStatus | read-create | current | Row status object used to indicate the status of the row. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2 | NodewlsxWlanStationInfoGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1 | TablewlsxWlanStationTable | not-accessible | current | This Table lists all the wireless stations associated with the Access points connected to this controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1 | RowwlsxWlanStationEntry | not-accessible | current | Station Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.1 | ColumnwlanStaPhyAddress | not-accessible | current | The Physical Address of the Station. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.2 | ColumnwlanStaApBssid | read-only | current | The Access point to which this station last associated to. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.3 | ColumnwlanStaPhyType | read-only | current | Type of the Station. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.4 | ColumnwlanStaIsAuthenticated | read-only | current | Indicates whether the station is authenticated. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.5 | ColumnwlanStaIsAssociated | read-only | current | Indicates whether the station is associated. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.6 | ColumnwlanStaChannel | read-only | deprecated | Channel on which the station is associated. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.7 | ColumnwlanStaVlanId | read-only | current | VLAN in which the station is present. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.8 | ColumnwlanStaVOIPState | read-only | current | The State of VoIP for this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.9 | ColumnwlanStaVOIPProtocol | read-only | current | If VoIP is enabled, the type of the protocol supported. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.10 | ColumnwlanStaTransmitRate | read-only | current | Transmit rate with which the Station is associated with this system. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.11 | ColumnwlanStaAssociationID | read-only | current | AID with which the Station is associated with this system. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.12 | ColumnwlanStaAccessPointESSID | read-only | current | ESSID of the Access point |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.13 | ColumnwlanStaPhyNumber | read-only | current | Radio PHY number to which the station is associated |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.14 | ColumnwlanStaRSSI | read-only | current | Signal to Noise ratio for the station. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.15 | ColumnwlanStaUpTime | read-only | current | Time since the station associated to the current BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.16 | ColumnwlanStaHTMode | read-only | current | The HT status of the station. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.17 | ColumnwlanStaTransmitRateCode | read-only | current | Transmit rate code with which the Station is associated with this system, unit is mbps. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.18 | ColumnwlanStaChannelV2 | read-only | current | Channel on which the station is associated. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.19 | ColumnwlanStaSecChannel | read-only | current | The secondary channel used for 80+80 MHz BSS. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.20 | ColumnwlanStaApName | read-only | current | AP on which the station is associated. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2 | TablewlsxWlanStaAssociationFailureTable | not-accessible | current | This Table lists all the stations and the BSSID's to which they failed to associate. Once a station successfully associates, association failure entries are no… |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1 | RowwlsxWlanStaAssociationFailureEntry | not-accessible | current | Station Association Failure Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.1 | ColumnwlanStaAssocFailureApName | read-only | current | Name of the Access Point to which this station tried to associate. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.2 | ColumnwlanStaAssocFailureApEssid | read-only | current | ESSID to which the station association failed. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.3 | ColumnwlanStaAssocFailurePhyNum | read-only | current | Radio PHY number to which the station tried to associate. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.4 | ColumnwlanStaAssocFailurePhyType | read-only | current | Radio PHY Type of the Station. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.5 | ColumnwlanStaAssocFailureElapsedTime | read-only | current | Elapsed time in timeticks after the station's failure to associate. |
| 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.6 | ColumnwlanStaAssocFailureReason | read-only | current | Reason for the Station association failure |
| 1.3.6.1.4.1.14823.2.2.1.5.2.3 | NodewlsxWlanAssociationInfoGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.3 | NodewlsxWlanStatsGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.3.1 | NodewlsxWlanAccessPointStatsGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1 | TablewlsxWlanAPStatsTable | not-accessible | current | This Table lists the statistics of all the Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1 | RowwlsxWlanAPStatsEntry | not-accessible | current | Access Point Stats entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1 | ColumnwlanAPCurrentChannel | read-only | current | The channel the AP is currently using. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.2 | ColumnwlanAPNumClients | read-only | current | The number of clients associated to this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.3 | ColumnwlanAPTxPkts | read-only | current | The number of packets transmitted on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.4 | ColumnwlanAPTxBytes | read-only | current | The number of bytes transmitted on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.5 | ColumnwlanAPRxPkts | read-only | current | The number of packets received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.6 | ColumnwlanAPRxBytes | read-only | current | The number of bytes received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.7 | ColumnwlanAPTxDeauthentications | read-only | current | The number of deauthentications transmitted on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.8 | ColumnwlanAPRxDeauthentications | read-only | current | The number of deauthentications received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.9 | ColumnwlanAPChannelThroughput | read-only | current | The throughput achieved on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.10 | ColumnwlanAPFrameRetryRate | read-only | current | The number of retry packets as a percentage of the total packets transmitted and received by this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.11 | ColumnwlanAPFrameLowSpeedRate | read-only | current | The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this BSSID |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.12 | ColumnwlanAPFrameNonUnicastRate | read-only | current | The number of broadcast and multicast packets as a percentage of the total packets transmitted on this BSSIDchannel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.13 | ColumnwlanAPFrameFragmentationRate | read-only | current | The number of fragments as a percentage of the total packets transmitted by this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.14 | ColumnwlanAPFrameBandwidthRate | read-only | current | The bandwidth of this BSSID in Kbps. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.15 | ColumnwlanAPFrameRetryErrorRate | read-only | current | The number of error packets as a percentage of the total packets received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.16 | ColumnwlanAPChannelErrorRate | read-only | current | The number of error packets as a percentage of the total packets received on the current channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.17 | ColumnwlanAPFrameReceiveErrorRate | read-only | current | The number of error packets as a percentage of the total packets received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.18 | ColumnwlanAPRxDataPkts | read-only | deprecated | The number of packets received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.19 | ColumnwlanAPRxDataBytes | read-only | deprecated | The number of bytes received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.20 | ColumnwlanAPTxDataPkts | read-only | deprecated | The number of packets transmitted on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.21 | ColumnwlanAPTxDataBytes | read-only | deprecated | The number of bytes transmitted on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.22 | ColumnwlanAPRxDataPkts64 | read-only | current | The number of packets received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.23 | ColumnwlanAPRxDataBytes64 | read-only | current | The number of bytes received on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.24 | ColumnwlanAPTxDataPkts64 | read-only | current | The number of packets transmitted on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.25 | ColumnwlanAPTxDataBytes64 | read-only | current | The number of bytes transmitted on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.26 | ColumnwlanAPWiredRxErrorPkts | read-only | current | The number of error packets received from the controller on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.27 | ColumnwlanAPRxErrorPkts | read-only | current | The number of error packets received from stations on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.28 | ColumnwlanAPHTMode | read-only | current | The HT mode of the AP, if any. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.29 | ColumnwlanAPPhyType | read-only | current | The PHY Type of the AP. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.30 | ColumnwlanAPCurrentSecChannel | read-only | current | The secondary channel when operating in 80+80Mhz bandwidth. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2 | TablewlsxWlanAPRateStatsTable | not-accessible | current | This table contains all the AP Packet and Byte Counts but represented in terms of rate categories. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1 | RowwlsxWlanAPRateStatsEntry | not-accessible | current | Data rate based packet and byte count entry for an AP |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.1 | ColumnwlanAPStatsTotPktsAt1Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 1Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.2 | ColumnwlanAPStatsTotBytesAt1Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 1Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.3 | ColumnwlanAPStatsTotPktsAt2Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 2Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.4 | ColumnwlanAPStatsTotBytesAt2Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 2Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.5 | ColumnwlanAPStatsTotPktsAt5Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 5Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.6 | ColumnwlanAPStatsTotBytesAt5Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 5Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.7 | ColumnwlanAPStatsTotPktsAt11Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 11Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.8 | ColumnwlanAPStatsTotBytesAt11Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 11Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.9 | ColumnwlanAPStatsTotPktsAt6Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 6Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.10 | ColumnwlanAPStatsTotBytesAt6Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 6Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.11 | ColumnwlanAPStatsTotPktsAt12Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 12Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.12 | ColumnwlanAPStatsTotBytesAt12Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 12Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.13 | ColumnwlanAPStatsTotPktsAt18Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 18Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.14 | ColumnwlanAPStatsTotBytesAt18Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 18Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.15 | ColumnwlanAPStatsTotPktsAt24Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 24Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.16 | ColumnwlanAPStatsTotBytesAt24Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 24Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.17 | ColumnwlanAPStatsTotPktsAt36Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 36Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.18 | ColumnwlanAPStatsTotBytesAt36Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 36Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.19 | ColumnwlanAPStatsTotPktsAt48Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 48Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.20 | ColumnwlanAPStatsTotBytesAt48Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 48Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.21 | ColumnwlanAPStatsTotPktsAt54Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 54Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.22 | ColumnwlanAPStatsTotBytesAt54Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 54Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.23 | ColumnwlanAPStatsTotPktsAt9Mbps | read-only | current | This attribute indicates the total number of packets observed on this BSSID at 9Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.24 | ColumnwlanAPStatsTotBytesAt9Mbps | read-only | current | This attribute indicates the total number of Bytes observed on this BSSID at 9Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3 | TablewlsxWlanAPDATypeStatsTable | not-accessible | current | This table contains all the per BSSID Packet and Byte Counts but broken down in terms of Destination Address Type. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1 | RowwlsxWlanAPDATypeStatsEntry | not-accessible | current | Destination Address based packet and byte count entry for an AP |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.1 | ColumnwlanAPStatsTotDABroadcastPkts | read-only | current | This attribute indicates the total number of Broadcast packets observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.2 | ColumnwlanAPStatsTotDABroadcastBytes | read-only | current | This attribute indicates the total number of Broadcast Bytes observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.3 | ColumnwlanAPStatsTotDAMulticastPkts | read-only | current | This attribute indicates the total number of Multicast packets observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.4 | ColumnwlanAPStatsTotDAMulticastBytes | read-only | current | This attribute indicates the total number of Multicast Bytes observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.5 | ColumnwlanAPStatsTotDAUnicastPkts | read-only | current | This attribute indicates the total number of Unicast packets observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.6 | ColumnwlanAPStatsTotDAUnicastBytes | read-only | current | This attribute indicates the total number of Unicast Bytes observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4 | TablewlsxWlanAPFrameTypeStatsTable | not-accessible | current | This table contains all the per BSSID Packet and Byte Counts but broken down into different Frame Types. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1 | RowwlsxWlanAPFrameTypeStatsEntry | not-accessible | current | Frame Type based packet and byte count entry for an AP |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.1 | ColumnwlanAPStatsTotMgmtPkts | read-only | current | This attribute indicates the total number of Management packets observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.2 | ColumnwlanAPStatsTotMgmtBytes | read-only | current | This attribute indicates the total number of Management Bytes observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.3 | ColumnwlanAPStatsTotCtrlPkts | read-only | current | This attribute indicates the total number of Control packets observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.4 | ColumnwlanAPStatsTotCtrlBytes | read-only | current | This attribute indicates the total number of Control Bytes observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.5 | ColumnwlanAPStatsTotDataPkts | read-only | current | This attribute indicates the total number of Data packets observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.6 | ColumnwlanAPStatsTotDataBytes | read-only | current | This attribute indicates the total number of Data Bytes observed on this BSSID. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5 | TablewlsxWlanAPPktSizeStatsTable | not-accessible | current | This table contains all the per BSSID Packet Count but broken down into different Packet Sizes. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1 | RowwlsxWlanAPPktSizeStatsEntry | not-accessible | current | Packet Size based packet count entry for a BSSID |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.1 | ColumnwlanAPStatsPkts63Bytes | read-only | current | This attribute indicates the total number of packets that were less than 64 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.2 | ColumnwlanAPStatsPkts64To127 | read-only | current | This attribute indicates the total number of packets that were between 64 and 127 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.3 | ColumnwlanAPStatsPkts128To255 | read-only | current | This attribute indicates the total number of packets that were between 128 and 255 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.4 | ColumnwlanAPStatsPkts256To511 | read-only | current | This attribute indicates the total number of packets that were between 256 and 511 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.5 | ColumnwlanAPStatsPkts512To1023 | read-only | current | This attribute indicates the total number of packets that were between 512 and 1023 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.6 | ColumnwlanAPStatsPkts1024To1518 | read-only | current | This attribute indicates the total number of packets that were between 1024 and 1518 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6 | TablewlsxWlanAPChStatsTable | not-accessible | current | This Table lists the Channel statistics of all the Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1 | RowwlsxWlanAPChStatsEntry | not-accessible | current | Access Point Channel Stats entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.1 | ColumnwlanAPChannelNumber | read-only | deprecated | The channel the AP is currently using |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.2 | ColumnwlanAPChNumStations | read-only | current | This attribute indicates the number of stations using this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.3 | ColumnwlanAPChTotPkts | read-only | current | This attribute indicates the total packets observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.4 | ColumnwlanAPChTotBytes | read-only | current | This attribute indicates the total Bytes observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.5 | ColumnwlanAPChTotRetryPkts | read-only | current | This attribute indicates the total Retry Packets observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.6 | ColumnwlanAPChTotFragmentedPkts | read-only | current | This attribute indicates the total Fragmented Packets observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.7 | ColumnwlanAPChTotPhyErrPkts | read-only | current | This attribute indicates the total Physical Error Packets observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.8 | ColumnwlanAPChTotMacErrPkts | read-only | current | This attribute indicates the total Mac errors packets observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.9 | ColumnwlanAPChNoise | read-only | current | This attribute indicates the noise observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.10 | ColumnwlanAPChCoverageIndex | read-only | current | This attribute indicates the coverage provided by the AP on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.11 | ColumnwlanAPChInterferenceIndex | read-only | current | This attribute indicates the interference observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.12 | ColumnwlanAPChFrameRetryRate | read-only | current | The number of retry packets as a percentage of the total packets transmitted and received on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.13 | ColumnwlanAPChFrameLowSpeedRate | read-only | current | The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received on this chan… |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.14 | ColumnwlanAPChFrameNonUnicastRate | read-only | current | The number of broadcast and multicast packets as a percentage of the total packets transmitted on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.15 | ColumnwlanAPChFrameFragmentationRate | read-only | current | The number of fragments as a percentage of the total packets transmitted on this channel |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.16 | ColumnwlanAPChFrameBandwidthRate | read-only | current | The bandwidth of this channel in Kbps. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.17 | ColumnwlanAPChFrameRetryErrorRate | read-only | deprecated | The number of error packets as a percentage of the total packets received on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.18 | ColumnwlanAPChBusyRate | read-only | current | This attribute indicates the busy this channel is. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.19 | ColumnwlanAPChNumAPs | read-only | current | This attribute indicates the number of Access Points observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.20 | ColumnwlanAPChFrameReceiveErrorRate | read-only | current | The number of error packets as a percentage of the total packets received on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.21 | ColumnwlanAPChTransmittedFragmentCount | read-only | current | This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address… |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.22 | ColumnwlanAPChMulticastTransmittedFrameCount | read-only | current | This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in a… |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.23 | ColumnwlanAPChFailedCount | read-only | current | This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or d… |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.24 | ColumnwlanAPChRetryCount | read-only | current | This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.25 | ColumnwlanAPChMultipleRetryCount | read-only | current | This counter shall increment when an MSDU is successfully transmitted after more than one retransmission. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.26 | ColumnwlanAPChFrameDuplicateCount | read-only | current | This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.27 | ColumnwlanAPChRTSSuccessCount | read-only | current | This counter shall increment when a CTS is received in response to an RTS. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.28 | ColumnwlanAPChRTSFailureCount | read-only | current | This counter shall increment when a CTS is not received in response to an RTS. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.29 | ColumnwlanAPChACKFailureCount | read-only | current | This counter shall increment when an ACK is not received when expected. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.30 | ColumnwlanAPChReceivedFragmentCount | read-only | current | This counter shall be incremented for each successfully received MPDU of type Data or Management. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.31 | ColumnwlanAPChMulticastReceivedFrameCount | read-only | current | This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.32 | ColumnwlanAPChFCSErrorCount | read-only | current | This counter shall increment when an FCS error is detected in a received MPDU. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.33 | ColumnwlanAPChTransmittedFrameCount | read-only | current | This counter shall increment for each successfully transmitted MSDU. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.34 | ColumnwlanAPChWEPUndecryptableCount | read-only | current | This counter shall increment when a frame is received with the Protected Frame subfield of the Frame Control field set to one and the WEPOn value for the key m… |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.35 | ColumnwlanAPChRxUtilization | read-only | current | This is the percentage of time spent by the radio in receiving packets. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.36 | ColumnwlanAPChTxUtilization | read-only | current | This is the percentage of time spent by the radio in transmitting packets. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.37 | ColumnwlanAPChUtilization | read-only | current | This is the percentage of time the channel is busy. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.38 | ColumnwlanAPChPhyType | read-only | current | The PHY Type of the AP. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.39 | ColumnwlanAPChannelNumberV2 | read-only | current | The channel the AP is currently using |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.40 | ColumnwlanAPChHTMode | read-only | current | The HT mode of the AP, if any. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.41 | ColumnwlanAPChTotBytes64 | read-only | current | This attribute indicates the total Bytes observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7 | TablewlsxWlanAPWiredStatsTable | not-accessible | deprecated | This Table lists the Wired statistics of all the Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1 | RowwlsxWlanAPWiredStatsEntry | not-accessible | deprecated | Access Point Wired Stats entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.1 | ColumnwlanAPWiredRxPkts | read-only | deprecated | This attribute indicates the total packets received from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.2 | ColumnwlanAPWiredRxDroppedPkts | read-only | deprecated | This attribute indicates the total dropped packets received from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.3 | ColumnwlanAPWiredRxBytes | read-only | deprecated | This attribute indicates the total bytes of correct packets received from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.4 | ColumnwlanAPWiredTxBytes | read-only | deprecated | This attribute indicates the total bytes transmitted from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.5 | ColumnwlanAPWiredRxRate | read-only | deprecated | This attribute indicates the data rate (kbyte/s) received from AP wired side in sampling interval. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.7.1.6 | ColumnwlanAPWiredTxRate | read-only | deprecated | This attribute indicates the data rate (kbyte/s) transmitted from AP wired side in sampling interval. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.8 | TablewlsxWlanAPESSIDStatsTable | not-accessible | current | This Table lists the ESSID statistics of all the Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1 | RowwlsxWlanAPESSIDStatsEntry | not-accessible | current | Access Point ESSID Stats entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.1 | ColumnwlanAPESSIDWirelessRxBytes | read-only | current | This attribute indicates the total bytes of correct packets received from the AP ESSID wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.2 | ColumnwlanAPESSIDWirelessTxBytes | read-only | current | This attribute indicates the total bytes transmitted from the AP ESSID wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.3 | ColumnwlanAPESSIDWiredRxBytes | read-only | current | This attribute indicates the total bytes of correct packets received from the AP ESSID wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.8.1.4 | ColumnwlanAPESSIDWiredTxBytes | read-only | current | This attribute indicates the total bytes transmitted from the AP ESSID wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9 | TablewlsxWlanAPRadioStatsTable | not-accessible | current | This Table lists the Radio statistics of all the Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1 | RowwlsxWlanAPRadioStatsEntry | not-accessible | current | Access Point Radio Stats entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.1 | ColumnwlanAPRadioRxPkts | read-only | current | This attribute indicates the total packets transmitted from the AP radio wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.2 | ColumnwlanAPRadioRxBytes | read-only | current | This attribute indicates the total correct bytes received from the AP radio wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.3 | ColumnwlanAPRadioTxPkts | read-only | current | This attribute indicates the total packets transmitted from the AP radio wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.4 | ColumnwlanAPRadioTxBytes | read-only | current | This attribute indicates the total bytes transmitted from the AP radio wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.5 | ColumnwlanAPRadioTxDroppedPkts | read-only | current | This attribute indicates the dropped packets transmitted from the AP radio wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.6 | ColumnwlanAPRadioTxErrorPkts | read-only | current | This attribute indicates the error packets transmitted from the AP radio wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.7 | ColumnwlanAPRadioRxRate | read-only | current | This attribute indicates the data rate (kbyte/s) received from AP radio wireless side in sampling interval. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.8 | ColumnwlanAPRadioTxRate | read-only | current | This attribute indicates the data rate (kbyte/s) transmitted from AP radio wireless side in sampling interval. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.9 | ColumnwlanApRadioAssocReqCount | read-only | current | This attribute indicates the times of associate request on this radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.10 | ColumnwlanApRadioAssocReqSuccCount | read-only | current | This attribute indicates the times of successful associate request on this radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.11 | ColumnwlanApRadioReAssocReqCount | read-only | current | This attribute indicates the times of re-associate request on this radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.12 | ColumnwlanApRadioReAssocReqSuccCount | read-only | current | This attribute indicates the times of successful re-associate request on this radio. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.13 | ColumnwlanAPRadioStationDuration | read-only | current | This attribute indicates the total occupied duration, which is the total duration of user connecting. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.14 | ColumnwlanAPRadioAssocSuccPercent | read-only | current | The Association Success Percent. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.9.1.15 | ColumnwlanAPRadioTxDataBytes | read-only | current | This attribute indicates the total data bytes transmitted from the AP radio wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10 | TablewlsxWlanAPWiredPortStatsTable | not-accessible | current | This Table lists the Wired statistics of all the Access Points connected to the controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1 | RowwlsxWlanAPWiredPortStatsEntry | not-accessible | current | Access Point Wired Port Stats entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.1 | ColumnwlanAPPortIndex | not-accessible | current | AP Wired Port Mac Index (Offset from base Mac Address) |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.2 | ColumnwlanAPPortName | read-only | current | AP Wired Port Name |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.3 | ColumnwlanAPWiredPortRxPkts | read-only | current | This attribute indicates the total packets received from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.4 | ColumnwlanAPWiredPortRxDroppedPkts | read-only | current | This attribute indicates the total dropped packets received from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.5 | ColumnwlanAPWiredPortRxErrors | read-only | current | This attribute indicates the total number of error packets received from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.6 | ColumnwlanAPWiredPortRxBytes | read-only | current | This attribute indicates the total bytes of correct packets received from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.7 | ColumnwlanAPWiredPortTxPkts | read-only | current | This attribute indicates the total packets transmitted from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.8 | ColumnwlanAPWiredPortTxDroppedPkts | read-only | current | This attribute indicates the total dropped packets transmitted from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.9 | ColumnwlanAPWiredPortTxErrors | read-only | current | This attribute indicates the total number of error packets transmitted from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.10 | ColumnwlanAPWiredPortTxBytes | read-only | current | This attribute indicates the total bytes transmitted from the AP wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.11 | ColumnwlanAPWiredPortRxRate | read-only | current | This attribute indicates the data rate (kbyte/s) received from AP wired side in sampling interval. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.12 | ColumnwlanAPWiredPortTxRate | read-only | current | This attribute indicates the data rate (kbyte/s) transmitted from AP wired side in sampling interval. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.1.10.1.13 | ColumnwlanAPWiredPortSpeed | read-only | current | This attribute indicates the speed of the port |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2 | NodewlsxWlanStationStatsGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1 | TablewlsxWlanStationStatsTable | not-accessible | current | This Table lists statistics of all the wireless stations associated with an AP connected to this controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1 | RowwlsxWlanStationStatsEntry | not-accessible | current | Station Stats Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.1 | ColumnwlanStaChannelNum | read-only | current | The channel the station is currently using. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.2 | ColumnwlanStaTxPkts | read-only | current | The number of packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.3 | ColumnwlanStaTxBytes | read-only | current | The number of bytes transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.4 | ColumnwlanStaRxPkts | read-only | current | The number of packets received by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.5 | ColumnwlanStaRxBytes | read-only | current | The number of bytes received by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.6 | ColumnwlanStaTxBCastPkts | read-only | current | The number of broadcast packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.7 | ColumnwlanStaRxBCastBytes | read-only | deprecated | The number of broadcast bytes transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.8 | ColumnwlanStaTxMCastPkts | read-only | current | The number of multicast packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.9 | ColumnwlanStaRxMCastBytes | read-only | deprecated | The number of multicast bytes transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.10 | ColumnwlanStaDataPkts | read-only | current | The total number of Data packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.11 | ColumnwlanStaCtrlPkts | read-only | current | The total number of Control packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.12 | ColumnwlanStaNumAssocRequests | read-only | current | The number of Association requests transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.13 | ColumnwlanStaNumAuthRequests | read-only | current | The number of Authentication requests transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.14 | ColumnwlanStaTxDeauthentications | read-only | current | The number of Deauthentication frames transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.15 | ColumnwlanStaRxDeauthentications | read-only | current | The number of Deauthentication frames received by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.16 | ColumnwlanStaFrameRetryRate | read-only | current | The number of retry packets as a percentage of the total packets transmitted and received by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.17 | ColumnwlanStaFrameLowSpeedRate | read-only | current | The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this stat… |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.18 | ColumnwlanStaFrameNonUnicastRate | read-only | current | The number of broadcast and multicast packets as a percentage of the total packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.19 | ColumnwlanStaFrameFragmentationRate | read-only | current | The number of fragments as a percentage of the total packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.20 | ColumnwlanStaFrameBandwidthRate | read-only | current | The bandwidth of this station in Kbps. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.21 | ColumnwlanStaFrameRetryErrorRate | read-only | deprecated | The number of error packets as a percentage of the total packets received by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.22 | ColumnwlanStaFrameReceiveErrorRate | read-only | current | The number of error packets as a percentage of the total packets received by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.23 | ColumnwlanStaTxBCastBytes | read-only | current | The number of broadcast bytes transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.24 | ColumnwlanStaTxMCastBytes | read-only | current | The number of multicast bytes transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.25 | ColumnwlanStaTxBytes64 | read-only | current | The number of bytes transmitted by this station, 64-bit value |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.26 | ColumnwlanStaRxBytes64 | read-only | current | The number of bytes received by this station, 64-bit value |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.27 | ColumnwlanStaStatsPhyType | read-only | current | The PHY Type of the Station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.28 | ColumnwlanStaSecChannelNum | read-only | current | The secondary channel when operating in 80+80Mhz bandwidth. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.29 | ColumnwlanStaStatsHTMode | read-only | current | The HT mode of the Station, if any. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2 | TablewlsxWlanStaRateStatsTable | not-accessible | current | This table contains all the Packet and Byte Counts for a station represented in terms of rate categories. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1 | RowwlsxWlanStaRateStatsEntry | not-accessible | current | Data rate based packet and byte count entry for a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.1 | ColumnwlanStaTxPktsAt1Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.2 | ColumnwlanStaTxBytesAt1Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 1Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.3 | ColumnwlanStaTxPktsAt2Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 2Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.4 | ColumnwlanStaTxBytesAt2Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 2Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.5 | ColumnwlanStaTxPktsAt5Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 5Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.6 | ColumnwlanStaTxBytesAt5Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 5Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.7 | ColumnwlanStaTxPktsAt11Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 11Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.8 | ColumnwlanStaTxBytesAt11Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 11Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.9 | ColumnwlanStaTxPktsAt6Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 6Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.10 | ColumnwlanStaTxBytesAt6Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 6Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.11 | ColumnwlanStaTxPktsAt12Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 12Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.12 | ColumnwlanStaTxBytesAt12Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 12Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.13 | ColumnwlanStaTxPktsAt18Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 18Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.14 | ColumnwlanStaTxBytesAt18Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 18Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.15 | ColumnwlanStaTxPktsAt24Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 24Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.16 | ColumnwlanStaTxBytesAt24Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 24Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.17 | ColumnwlanStaTxPktsAt36Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 36Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.18 | ColumnwlanStaTxBytesAt36Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 36Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.19 | ColumnwlanStaTxPktsAt48Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 48Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.20 | ColumnwlanStaTxBytesAt48Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 48Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.21 | ColumnwlanStaTxPktsAt54Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 54Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.22 | ColumnwlanStaTxBytesAt54Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 54Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.23 | ColumnwlanStaRxPktsAt1Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 1Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.24 | ColumnwlanStaRxBytesAt1Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 1Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.25 | ColumnwlanStaRxPktsAt2Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 2Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.26 | ColumnwlanStaRxBytesAt2Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 2Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.27 | ColumnwlanStaRxPktsAt5Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 5Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.28 | ColumnwlanStaRxBytesAt5Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 5Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.29 | ColumnwlanStaRxPktsAt11Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 11Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.30 | ColumnwlanStaRxBytesAt11Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 11Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.31 | ColumnwlanStaRxPktsAt6Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 6Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.32 | ColumnwlanStaRxBytesAt6Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 6Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.33 | ColumnwlanStaRxPktsAt12Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 12Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.34 | ColumnwlanStaRxBytesAt12Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 12Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.35 | ColumnwlanStaRxPktsAt18Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 18Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.36 | ColumnwlanStaRxBytesAt18Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 18Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.37 | ColumnwlanStaRxPktsAt24Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 24Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.38 | ColumnwlanStaRxBytesAt24Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 24Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.39 | ColumnwlanStaRxPktsAt36Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 36Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.40 | ColumnwlanStaRxBytesAt36Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 36Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.41 | ColumnwlanStaRxPktsAt48Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 48Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.42 | ColumnwlanStaRxBytesAt48Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 48Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.43 | ColumnwlanStaRxPktsAt54Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 54Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.44 | ColumnwlanStaRxBytesAt54Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 54Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.45 | ColumnwlanStaTxPktsAt9Mbps | read-only | current | This attribute indicates the number of Packets Transmitted by the station at 9Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.46 | ColumnwlanStaTxBytesAt9Mbps | read-only | current | This attribute indicates the number of Octets Transmitted by the station at 9Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.47 | ColumnwlanStaRxPktsAt9Mbps | read-only | current | This attribute indicates the number of Packets Received by the station at 9Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.48 | ColumnwlanStaRxBytesAt9Mbps | read-only | current | This attribute indicates the number of Octets Received by the station at 9Mbps rate. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3 | TablewlsxWlanStaDATypeStatsTable | not-accessible | current | This table contains all the Packet and Byte Counts for a station but but broken down in terms of Destination Address Type. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1 | RowwlsxWlanStaDATypeStatsEntry | not-accessible | current | Destination Address based packet and byte count entry for a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.1 | ColumnwlanStaTxDABroadcastPkts | read-only | current | This attribute indicates the number of Broadcast packets transmitted by this Station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.2 | ColumnwlanStaTxDABroadcastBytes | read-only | current | This attribute indicates the number of Broadcast Bytes transmitted by this Station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.3 | ColumnwlanStaTxDAMulticastPkts | read-only | current | This attribute indicates the number of Multicast packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.4 | ColumnwlanStaTxDAMulticastBytes | read-only | current | This attribute indicates the number of Multicast Bytes transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.5 | ColumnwlanStaTxDAUnicastPkts | read-only | current | This attribute indicates the total of Unicast packets transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.6 | ColumnwlanStaTxDAUnicastBytes | read-only | current | This attribute indicates the total of Unicast Bytes transmitted by this station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4 | TablewlsxWlanStaFrameTypeStatsTable | not-accessible | current | This table contains all the Packet and Byte Counts for stations but broken down into different Frame Types. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1 | RowwlsxWlanStaFrameTypeStatsEntry | not-accessible | current | Frame Type based packet and byte count entry for a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.1 | ColumnwlanStaTxMgmtPkts | read-only | current | This attribute indicates the Transmitted Management packets from a station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.2 | ColumnwlanStaTxMgmtBytes | read-only | current | This attribute indicates the Transmitted Management Bytes from a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.3 | ColumnwlanStaTxCtrlPkts | read-only | current | This attribute indicates the Transmitted Control packets from a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.4 | ColumnwlanStaTxCtrlBytes | read-only | current | This attribute indicates the Transmitted Control Bytes from a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.5 | ColumnwlanStaTxDataPkts | read-only | current | This attribute indicates the Transmitted Data packets from a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.6 | ColumnwlanStaTxDataBytes | read-only | current | This attribute indicates the Transmitted Data Bytes observed on this channel. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.7 | ColumnwlanStaRxMgmtPkts | read-only | current | This attribute indicates the number of received Management packets at a station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.8 | ColumnwlanStaRxMgmtBytes | read-only | current | This attribute indicates the number of received Management Bytes at a station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.9 | ColumnwlanStaRxCtrlPkts | read-only | current | This attribute indicates the number of received Control packets at a station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.10 | ColumnwlanStaRxCtrlBytes | read-only | current | This attribute indicates the number of received Control Bytes at a station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.11 | ColumnwlanStaRxDataPkts | read-only | current | This attribute indicates the number of received Data packets at a station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.12 | ColumnwlanStaRxDataBytes | read-only | current | This attribute indicates the number of received Data Bytes at a station. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5 | TablewlsxWlanStaPktSizeStatsTable | not-accessible | current | This table contains all the Packet and Byte Counts for stations but broken down into different Packet Sizes. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1 | RowwlsxWlanStaPktSizeStatsEntry | not-accessible | current | Packet Size based packet count entry for a station |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.1 | ColumnwlanStaTxPkts63Bytes | read-only | current | This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.2 | ColumnwlanStaTxPkts64To127 | read-only | current | This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.3 | ColumnwlanStaTxPkts128To255 | read-only | current | This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.4 | ColumnwlanStaTxPkts256To511 | read-only | current | This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.5 | ColumnwlanStaTxPkts512To1023 | read-only | current | This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.6 | ColumnwlanStaTxPkts1024To1518 | read-only | current | This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.7 | ColumnwlanStaRxPkts63Bytes | read-only | current | This attribute indicates the number of packets Received by the station that were less than 64 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.8 | ColumnwlanStaRxPkts64To127 | read-only | current | This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.9 | ColumnwlanStaRxPkts128To255 | read-only | current | This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.10 | ColumnwlanStaRxPkts256To511 | read-only | current | This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.11 | ColumnwlanStaRxPkts512To1023 | read-only | current | This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.12 | ColumnwlanStaRxPkts1024To1518 | read-only | current | This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3 | NodewlsxWlanSwitchStatsGroup | |||
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1 | TablewlsxWlanESSIDStatsTable | not-accessible | current | This Table lists statistics of the ESSID controlled by this controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1 | RowwlsxWlanESSIDStatsEntry | not-accessible | current | ESSID Stats Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.1 | ColumnwlanESSIDRxPkts | read-only | current | The total number of packets on the ESSID uplink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.2 | ColumnwlanESSIDRxDroppedPkts | read-only | current | The total number of dropped packets on the ESSID uplink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.3 | ColumnwlanESSIDRxRetryPkts | read-only | current | The total number of re-transmission packets on the ESSID uplink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.4 | ColumnwlanESSIDTxPkts | read-only | current | The total number of packets on the ESSID downlink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.5 | ColumnwlanESSIDTxDroppedPkts | read-only | current | The total number of dropped packets on the ESSID downlink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.6 | ColumnwlanESSIDTxRetryPkts | read-only | current | The total number of re-transmission packets on the ESSID downlink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.7 | ColumnwlanESSIDTxErrorPkts | read-only | current | The total number of error packets on the ESSID downlink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.8 | ColumnwlanESSIDRxRate | read-only | current | The data rate received from the ESSID in sampling interval, unit is kbyte/s. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.9 | ColumnwlanESSIDTxRate | read-only | current | The data rate transmitted from the ESSID in sampling interval, unit is kbyte/s. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.10 | ColumnwlanESSIDWiredRxPkts | read-only | current | The total number of packets on the ESSID uplink channel of wired side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.11 | ColumnwlanESSIDWiredRxBytes | read-only | current | The total number of bytes on the ESSID uplink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.1.1.12 | ColumnwlanESSIDWiredTxBytes | read-only | current | The total number of bytes on the ESSID downlink channel of wireless side. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.2 | TablewlsxWlanEthStatsTable | not-accessible | current | This Table lists statistics of all ethernet ports of this controller. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.2.1 | RowwlsxWlanEthStatsEntry | not-accessible | current | Ethernet Port Stats Entry |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.2.1.1 | ColumnwlanEthRxRate | read-only | current | The data rate received from the ethernet port in sampling interval, unit is kbyte/s. |
| 1.3.6.1.4.1.14823.2.2.1.5.3.3.2.1.2 | ColumnwlanEthTxRate | read-only | current | The data rate transmitted from the ethernet port in sampling interval, unit is kbyte/s. |
| 1.3.6.1.4.1.14823.2.2.1.5.100 | NodewlsxRAPTraps | |||
| 1.3.6.1.4.1.14823.2.2.1.5.100.1 | NotificationwlsxRAPActiveUplink | current | A trap which indicates the RAP Active Uplink |