ZYXEL-GS4024-MIB
456 objects
Fault event table definitions
Imported Objects
| BRIDGE-MIB | dot1dBasePort |
| DISMAN-PING-MIB | -- RFC2851 OperationResponseStatus |
| IF-MIB | InterfaceIndexOrZero -- RFC2863 |
| INET-ADDRESS-MIB | -- RFC2571 InetAddressType InetAddress |
| OSPF-MIB | ospfAddressLessIf ospfAreaId ospfIfIpAddress ospfLsdbAreaId ospfLsdbLsid ospfLsdbRouterId ospfLsdbType ospfNbrAddressLessIndex ospfNbrIpAddr ospfVirtIfAreaId ospfVirtIfNeighbor |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-MIB | -- RFC2579 sysObjectID |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2578 TEXTUAL-CONVENTION DateAndTime MacAddress RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890 | Nodezyxel | |||
| 1.3.6.1.4.1.890.1 | Nodeproducts | |||
| 1.3.6.1.4.1.890.1.5 | NodeaccessSwitch | |||
| 1.3.6.1.4.1.890.1.5.8 | NodeesSeries | |||
| 1.3.6.1.4.1.890.1.5.8.13 | Nodegs4024 | |||
| 1.3.6.1.4.1.890.1.5.8.13.1 | NodesysInfo | |||
| 1.3.6.1.4.1.890.1.5.8.13.1.1 | ScalarsysSwPlatformMajorVers | read-only | mandatory | SW platform major version, e.g. 3. |
| 1.3.6.1.4.1.890.1.5.8.13.1.2 | ScalarsysSwPlatformMinorVers | read-only | mandatory | SW platform minor version, e.g. 50. |
| 1.3.6.1.4.1.890.1.5.8.13.1.3 | ScalarsysSwModelString | read-only | mandatory | Model letters, e.g. TJ |
| 1.3.6.1.4.1.890.1.5.8.13.1.4 | ScalarsysSwVersionControlNbr | read-only | mandatory | Version control number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.13.1.5 | ScalarsysSwDay | read-only | mandatory | SW compilation day, e.g. 19. |
| 1.3.6.1.4.1.890.1.5.8.13.1.6 | ScalarsysSwMonth | read-only | mandatory | SW compilation month, e.g. 8. |
| 1.3.6.1.4.1.890.1.5.8.13.1.7 | ScalarsysSwYear | read-only | mandatory | SW compilation year, e.g. 2004. |
| 1.3.6.1.4.1.890.1.5.8.13.1.8 | ScalarsysHwMajorVers | read-only | mandatory | HW major version number, e.g. 1. |
| 1.3.6.1.4.1.890.1.5.8.13.1.9 | ScalarsysHwMinorVers | read-only | mandatory | HW minor version number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.13.1.10 | ScalarsysSerialNumber | read-only | mandatory | Serial number |
| 1.3.6.1.4.1.890.1.5.8.13.2 | NoderateLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.2.1 | ScalarrateLimitState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.13.2.2 | TablerateLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.2.2.1 | RowrateLimitPortEntry | not-accessible | mandatory | An entry in rateLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.2.2.1.1 | ColumnrateLimitPortState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.2.2.1.2 | ColumnrateLimitPortCommitRate | read-write | mandatory | Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.13.2.2.1.3 | ColumnrateLimitPortPeakRate | read-write | mandatory | Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.13.2.2.1.4 | ColumnrateLimitPortEgrRate | read-write | mandatory | Egress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000. |
| 1.3.6.1.4.1.890.1.5.8.13.3 | NodebrLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.3.1 | ScalarbrLimitState | read-write | mandatory | Broadcast/multicast/DLF rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.13.3.2 | TablebrLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.3.2.1 | RowbrLimitPortEntry | not-accessible | mandatory | An entry in brLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.3.2.1.1 | ColumnbrLimitPortBrState | read-write | mandatory | Broadcast rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.3.2.1.2 | ColumnbrLimitPortBrRate | read-write | mandatory | Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.13.3.2.1.3 | ColumnbrLimitPortMcState | read-write | mandatory | Multicast rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.3.2.1.4 | ColumnbrLimitPortMcRate | read-write | mandatory | AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.13.3.2.1.5 | ColumnbrLimitPortDlfState | read-write | mandatory | Destination lookup failure frames rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.3.2.1.6 | ColumnbrLimitPortDlfRate | read-write | mandatory | Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.13.4 | NodeportSecuritySetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.4.1 | ScalarportSecurityState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.4.2 | TableportSecurityPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.4.2.1 | RowportSecurityPortEntry | not-accessible | mandatory | An entry in portSecurityPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.4.2.1.1 | ColumnportSecurityPortState | read-write | mandatory | Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynami… |
| 1.3.6.1.4.1.890.1.5.8.13.4.2.1.2 | ColumnportSecurityPortLearnState | read-write | mandatory | MAC address learning enabled/disable on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.4.2.1.3 | ColumnportSecurityPortCount | read-write | mandatory | Number of (dynamic) MAC addresses that may be learned on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.4.3 | ScalarportSecurityMacFreeze | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.5 | NodevlanTrunkSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.5.1 | TablevlanTrunkPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.5.1.1 | RowvlanTrunkPortEntry | not-accessible | mandatory | An entry in vlanTrunkPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.5.1.1.1 | ColumnvlanTrunkPortState | read-write | mandatory | VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch. |
| 1.3.6.1.4.1.890.1.5.8.13.6 | NodectlProtTransSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.6.1 | ScalarctlProtTransState | read-write | mandatory | Bridge control protocol transparency enabled/disabled for the switch |
| 1.3.6.1.4.1.890.1.5.8.13.6.2 | TablectlProtTransTunnelPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.6.2.1 | RowctlProtTransTunnelPortEntry | not-accessible | mandatory | An entry in ctlProtTransTunnelPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.6.2.1.1 | ColumnctlProtTransTunnelMode | read-write | mandatory | Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3) |
| 1.3.6.1.4.1.890.1.5.8.13.7 | NodevlanStackSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.7.1 | ScalarvlanStackState | read-write | mandatory | VLAN Stacking enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.13.7.2 | ScalarvlanStackTpid | read-write | mandatory | SP TPID in hex format, e.g. 8100. |
| 1.3.6.1.4.1.890.1.5.8.13.7.3 | TablevlanStackPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.7.3.1 | RowvlanStackPortEntry | not-accessible | mandatory | An entry in vlanStackPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.7.3.1.1 | ColumnvlanStackPortMode | read-write | mandatory | Mode of the port.Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the … |
| 1.3.6.1.4.1.890.1.5.8.13.7.3.1.2 | ColumnvlanStackPortVid | read-write | mandatory | VLAN ID used in service provider tag. |
| 1.3.6.1.4.1.890.1.5.8.13.7.3.1.3 | ColumnvlanStackPortPrio | read-write | mandatory | Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest. |
| 1.3.6.1.4.1.890.1.5.8.13.8 | Noderadius8021xSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.8.1 | ScalarradiusLoginPrecedence | read-write | mandatory | 1. Local Only 2. Local then RADIUS 3. RADIUS Only |
| 1.3.6.1.4.1.890.1.5.8.13.8.2 | NoderadiusAnd8021xServer | |||
| 1.3.6.1.4.1.890.1.5.8.13.8.2.1 | ScalarradiusIpAddr | read-write | mandatory | The IP address of the RADIUS server. |
| 1.3.6.1.4.1.890.1.5.8.13.8.2.2 | ScalarradiusUdpPort | read-write | mandatory | The UDP port of the RADIUS server. |
| 1.3.6.1.4.1.890.1.5.8.13.8.2.3 | ScalarradiusSharedSecret | read-write | mandatory | Shared secret used for RADIUS and network eleemnt authentication. |
| 1.3.6.1.4.1.890.1.5.8.13.8.3 | ScalarportAuthState | read-write | mandatory | 802.1x port authentication enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.13.8.4 | TableportAuthTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.8.4.1 | RowportAuthEntry | not-accessible | mandatory | An entry in portAuthTable. |
| 1.3.6.1.4.1.890.1.5.8.13.8.4.1.1 | ColumnportAuthEntryState | read-write | mandatory | 802.1x port authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.8.4.1.2 | ColumnportReAuthEntryState | read-write | mandatory | 802.1x port re-authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.13.8.4.1.3 | ColumnportReAuthEntryTimer | read-write | mandatory | Re-authentication timer in seconds. |
| 1.3.6.1.4.1.890.1.5.8.13.9 | NodehwMonitorInfo | |||
| 1.3.6.1.4.1.890.1.5.8.13.9.1 | TablefanRpmTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.13.9.1.1 | RowfanRpmEntry | not-accessible | current | An entry in fanRpmTable. |
| 1.3.6.1.4.1.890.1.5.8.13.9.1.1.1 | ColumnfanRpmIndex | read-only | current | Index of FAN. |
| 1.3.6.1.4.1.890.1.5.8.13.9.1.1.2 | ColumnfanRpmCurValue | read-only | current | Current speed in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.13.9.1.1.3 | ColumnfanRpmMaxValue | read-only | current | Maximum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.13.9.1.1.4 | ColumnfanRpmMinValue | read-only | current | Minimum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.13.9.1.1.5 | ColumnfanRpmLowThresh | read-only | current | The minimum speed at which a normal fan should work. |
| 1.3.6.1.4.1.890.1.5.8.13.9.1.1.6 | ColumnfanRpmDescr | read-only | current | 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed. |
| 1.3.6.1.4.1.890.1.5.8.13.9.2 | TabletempTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.13.9.2.1 | RowtempEntry | not-accessible | current | An entry in tempTable. |
| 1.3.6.1.4.1.890.1.5.8.13.9.2.1.1 | ColumntempIndex | read-only | current | Index of temperature unit. 1:MAC, 2:CPU, 3:PHY |
| 1.3.6.1.4.1.890.1.5.8.13.9.2.1.2 | ColumntempCurValue | read-only | current | The current temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.13.9.2.1.3 | ColumntempMaxValue | read-only | current | The maximum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.13.9.2.1.4 | ColumntempMinValue | read-only | current | The minimum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.13.9.2.1.5 | ColumntempHighThresh | read-only | current | The upper temperature limit at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.13.9.2.1.6 | ColumntempDescr | read-only | current | 'Normal' indicates temperatures below the threshold and 'Error' for those above. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3 | TablevoltageTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1 | RowvoltageEntry | not-accessible | current | An entry in voltageTable. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1.1 | ColumnvoltageIndex | read-only | current | Index of voltage. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1.2 | ColumnvoltageCurValue | read-only | current | The current voltage reading. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1.3 | ColumnvoltageMaxValue | read-only | current | The maximum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1.4 | ColumnvoltageMinValue | read-only | current | The minimum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1.5 | ColumnvoltageNominalValue | read-only | current | The normal voltage at wchich the switch work. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1.6 | ColumnvoltageLowThresh | read-only | current | The minimum voltage at which the switch should work. |
| 1.3.6.1.4.1.890.1.5.8.13.9.3.1.7 | ColumnvoltageDescr | read-only | current | 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed. |
| 1.3.6.1.4.1.890.1.5.8.13.10 | NodesnmpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.10.1 | ScalarsnmpGetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.10.2 | ScalarsnmpSetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.10.3 | ScalarsnmpTrapCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.10.4 | TablesnmpTrapDestTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.10.4.1 | RowsnmpTrapDestEntry | not-accessible | mandatory | An entry in snmpTrapDestTable. |
| 1.3.6.1.4.1.890.1.5.8.13.10.4.1.1 | ColumnsnmpTrapDestIP | not-accessible | mandatory | IP address of trap destination. |
| 1.3.6.1.4.1.890.1.5.8.13.10.4.1.2 | ColumnsnmpTrapDestRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.11 | NodedateTimeServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.11.1 | ScalardateTimeServerType | read-write | mandatory | The time service protocol. |
| 1.3.6.1.4.1.890.1.5.8.13.11.2 | ScalardateTimeServerIP | read-write | mandatory | IP address of time server. |
| 1.3.6.1.4.1.890.1.5.8.13.11.3 | ScalardateTimeZone | read-write | mandatory | The time difference between UTC. Ex: +01 |
| 1.3.6.1.4.1.890.1.5.8.13.11.4 | ScalardateTimeNewDateYear | read-write | mandatory | The new date in year. |
| 1.3.6.1.4.1.890.1.5.8.13.11.5 | ScalardateTimeNewDateMonth | read-write | mandatory | The new date in month. |
| 1.3.6.1.4.1.890.1.5.8.13.11.6 | ScalardateTimeNewDateDay | read-write | mandatory | The new date in day. |
| 1.3.6.1.4.1.890.1.5.8.13.11.7 | ScalardateTimeNewTimeHour | read-write | mandatory | The new time in hour. |
| 1.3.6.1.4.1.890.1.5.8.13.11.8 | ScalardateTimeNewTimeMinute | read-write | mandatory | The new time in minute. |
| 1.3.6.1.4.1.890.1.5.8.13.11.9 | ScalardateTimeNewTimeSecond | read-write | mandatory | The new time in second. |
| 1.3.6.1.4.1.890.1.5.8.13.12 | NodesysMgmt | |||
| 1.3.6.1.4.1.890.1.5.8.13.12.1 | ScalarsysMgmtConfigSave | read-write | mandatory | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config w… |
| 1.3.6.1.4.1.890.1.5.8.13.12.2 | ScalarsysMgmtBootupConfig | read-write | mandatory | The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can ch… |
| 1.3.6.1.4.1.890.1.5.8.13.12.3 | ScalarsysMgmtReboot | read-write | mandatory | Reboot switch from SNMP. 1:Reboot, 0:Nothing |
| 1.3.6.1.4.1.890.1.5.8.13.12.4 | ScalarsysMgmtDefaultConfig | read-write | mandatory | Erase running config and reset to default. |
| 1.3.6.1.4.1.890.1.5.8.13.12.5 | ScalarsysMgmtLastActionStatus | read-only | mandatory | Display status of last mgmt action. |
| 1.3.6.1.4.1.890.1.5.8.13.12.6 | ScalarsysMgmtSystemStatus | read-only | mandatory | This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultane… |
| 1.3.6.1.4.1.890.1.5.8.13.12.7 | ScalarsysMgmtCPUUsage | read-only | mandatory | Show device CPU load in %, it's the snapshot of CPU load when getting the values. |
| 1.3.6.1.4.1.890.1.5.8.13.13 | Nodelayer2Setup | |||
| 1.3.6.1.4.1.890.1.5.8.13.13.1 | ScalarvlanTypeSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.13.2 | ScalarigmpSnoopingStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.13.3 | ScalartagVlanPortIsolationState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.13.4 | ScalarstpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.13.5 | ScalarigmpFilteringStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.13.6 | ScalarunknownMulticastFrameForwarding | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14 | NodeipSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.14.1 | ScalardnsIpAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.2 | ScalardefaultMgmt | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.3 | ScalardefaultGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.4 | NodeoutOfBandIpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.14.4.1 | ScalaroutOfBandIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.4.2 | ScalaroutOfBandSubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.4.3 | ScalaroutOfBandGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.5 | ScalarmaxNumOfInbandIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.6 | TableinbandIpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.6.1 | RowinbandIpEntry | not-accessible | mandatory | An entry in inbandIpTable. |
| 1.3.6.1.4.1.890.1.5.8.13.14.6.1.1 | ColumninbandEntryIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.6.1.2 | ColumninbandEntrySubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.6.1.3 | ColumninbandEntryVid | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.14.6.1.4 | ColumninbandEntryRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.15 | NodefilterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.15.1 | TablefilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.15.1.1 | RowfilterEntry | not-accessible | mandatory | An entry in filterTable. |
| 1.3.6.1.4.1.890.1.5.8.13.15.1.1.1 | ColumnfilterName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.15.1.1.2 | ColumnfilterActionState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.15.1.1.3 | ColumnfilterMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.15.1.1.4 | ColumnfilterVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.15.1.1.5 | ColumnfilterRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.16 | NodemirrorSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.16.1 | ScalarmirrorState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.16.2 | ScalarmirrorMonitorPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.16.3 | TablemirrorTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.16.3.1 | RowmirrorEntry | not-accessible | mandatory | An entry in mirrorTable. |
| 1.3.6.1.4.1.890.1.5.8.13.16.3.1.1 | ColumnmirrorMirroredState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.16.3.1.2 | ColumnmirrorDirection | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17 | NodeaggrSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.17.1 | ScalaraggrState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.2 | ScalaraggrSystemPriority | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.3 | TableaggrGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.3.1 | RowaggrGroupEntry | not-accessible | mandatory | An entry in aggrGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.13.17.3.1.1 | ColumnaggrGroupIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.3.1.2 | ColumnaggrGroupState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.3.1.3 | ColumnaggrGroupDynamicState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.4 | TableaggrPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.4.1 | RowaggrPortEntry | not-accessible | mandatory | An entry in aggrPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.17.4.1.1 | ColumnaggrPortGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.17.4.1.2 | ColumnaggrPortDynamicStateTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18 | NodeaccessCtlSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.18.1 | TableaccessCtlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.1.1 | RowaccessCtlEntry | not-accessible | mandatory | An entry in accessCtlTable. |
| 1.3.6.1.4.1.890.1.5.8.13.18.1.1.1 | ColumnaccessCtlService | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.1.1.2 | ColumnaccessCtlEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.1.1.3 | ColumnaccessCtlServicePort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.1.1.4 | ColumnaccessCtlTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.2 | TablesecuredClientTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.2.1 | RowsecuredClientEntry | not-accessible | mandatory | An entry in securedClientTable. |
| 1.3.6.1.4.1.890.1.5.8.13.18.2.1.1 | ColumnsecuredClientIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.2.1.2 | ColumnsecuredClientEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.2.1.3 | ColumnsecuredClientStartIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.2.1.4 | ColumnsecuredClientEndIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.18.2.1.5 | ColumnsecuredClientService | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.19 | NodequeuingMethodSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.19.1 | TableportQueuingMethodTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.19.1.1 | RowportQueuingMethodEntry | not-accessible | mandatory | An entry in portQueuingMethodTable. |
| 1.3.6.1.4.1.890.1.5.8.13.19.1.1.1 | ColumnportQueuingMethodQueue | read-only | mandatory | 0...7 |
| 1.3.6.1.4.1.890.1.5.8.13.19.1.1.2 | ColumnportQueuingMethodWeight | read-write | mandatory | 0...15 |
| 1.3.6.1.4.1.890.1.5.8.13.19.1.1.3 | ColumnportQueuingMethodMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20 | NodedhcpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.20.1 | NodedhcpRelay | |||
| 1.3.6.1.4.1.890.1.5.8.13.20.1.1 | ScalardhcpRelayEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.2 | ScalardhcpRelayOption82Enable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.3 | ScalardhcpRelayInfoEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.4 | ScalardhcpRelayInfoData | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.5 | ScalarmaxNumberOfDhcpRemoteServer | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.6 | TabledhcpRemoteServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.6.1 | RowdhcpRemoteServerEntry | not-accessible | mandatory | An entry in dhcpRemoteServerTable. |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.6.1.1 | ColumndhcpRemoteServerIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.1.6.1.2 | ColumndhcpRemoteServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2 | NodedhcpServer | |||
| 1.3.6.1.4.1.890.1.5.8.13.20.2.1 | ScalarmaxNumberOfDhcpServers | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2 | TabledhcpServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1 | RowdhcpServerEntry | not-accessible | mandatory | An entry in dhcpServerTable. |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.1 | ColumndhcpServerVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.2 | ColumndhcpServerStartAddr | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.3 | ColumndhcpServerPoolSize | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.4 | ColumndhcpServerMask | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.5 | ColumndhcpServerGateway | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.6 | ColumndhcpServerPrimaryDNS | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.7 | ColumndhcpServerSecondaryDNS | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.8 | ColumndhcpServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21 | NodestaticRouteSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.21.1 | ScalarmaxNumberOfStaticRoutes | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21.2 | TablestaticRouteTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21.2.1 | RowstaticRouteEntry | not-accessible | mandatory | An entry in staticRouteTable. |
| 1.3.6.1.4.1.890.1.5.8.13.21.2.1.1 | ColumnstaticRouteName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21.2.1.2 | ColumnstaticRouteIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21.2.1.3 | ColumnstaticRouteMask | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21.2.1.4 | ColumnstaticRouteGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21.2.1.5 | ColumnstaticRouteMetric | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.21.2.1.6 | ColumnstaticRouteRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.22 | NodearpInfo | |||
| 1.3.6.1.4.1.890.1.5.8.13.22.1 | TablearpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.22.1.1 | RowarpEntry | not-accessible | mandatory | An entry in arpTable. |
| 1.3.6.1.4.1.890.1.5.8.13.22.1.1.1 | ColumnarpIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.22.1.1.2 | ColumnarpIpAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.22.1.1.3 | ColumnarpMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.22.1.1.4 | ColumnarpMacVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.22.1.1.5 | ColumnarpType | read-only | mandatory | 1-static, 2-dynamic |
| 1.3.6.1.4.1.890.1.5.8.13.23 | NodeportOpModeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.23.1 | TableportOpModePortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1 | RowportOpModePortEntry | not-accessible | mandatory | An entry in portOpModePortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1.1 | ColumnportOpModePortSpeedDuplex | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1.2 | ColumnportOpModePortFlowCntl | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1.3 | ColumnportOpModePortName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1.4 | ColumnportOpModePortModuleType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1.5 | ColumnportOpModePortLinkUpType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1.6 | ColumnportOpModePortIntrusionLock | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.23.1.1.7 | ColumnportOpModePortLBTestStatus | read-only | mandatory | This entry display latest loopback test status of port while performing loopback test. |
| 1.3.6.1.4.1.890.1.5.8.13.24 | NodeportBasedVlanSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.24.1 | TableportBasedVlanPortListTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.24.1.1 | RowportBasedVlanPortListEntry | not-accessible | mandatory | An entry in portBasedVlanPortListTable. |
| 1.3.6.1.4.1.890.1.5.8.13.24.1.1.1 | ColumnportBasedVlanPortListMembers | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.25 | NodemulticastPortSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.25.1 | TablemulticastPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.25.1.1 | RowmulticastPortEntry | not-accessible | mandatory | An entry in multicastPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.25.1.1.1 | ColumnmulticastPortImmediateLeave | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.25.1.1.2 | ColumnmulticastPortMaxGroupLimited | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.25.1.1.3 | ColumnmulticastPortMaxOfGroup | read-write | mandatory | 0..255 |
| 1.3.6.1.4.1.890.1.5.8.13.25.1.1.4 | ColumnmulticastPortIgmpFilteringProfile | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.26 | NodemulticastStatus | |||
| 1.3.6.1.4.1.890.1.5.8.13.26.1 | TablemulticastStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.26.1.1 | RowmulticastStatusEntry | not-accessible | mandatory | An entry in multicastStatusTable. |
| 1.3.6.1.4.1.890.1.5.8.13.26.1.1.1 | ColumnmulticastStatusIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.26.1.1.2 | ColumnmulticastStatusVlanID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.26.1.1.3 | ColumnmulticastStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.26.1.1.4 | ColumnmulticastStatusGroup | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.27 | NodeigmpFilteringProfileSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.27.1 | ScalarigmpFilteringMaxNumberOfProfile | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.27.2 | TableigmpFilteringProfileTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.27.2.1 | RowigmpFilteringProfileEntry | not-accessible | mandatory | An entry in igmpFilteringProfileTable. |
| 1.3.6.1.4.1.890.1.5.8.13.27.2.1.1 | ColumnigmpFilteringProfileName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.27.2.1.2 | ColumnigmpFilteringProfileStartAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.27.2.1.3 | ColumnigmpFilteringProfileEndAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.27.2.1.4 | ColumnigmpFilteringProfileRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28 | NodemvrSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.28.1 | ScalarmaxNumberOfMVR | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.2 | TablemvrTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.2.1 | RowmvrEntry | not-accessible | mandatory | An entry in mvrTable. |
| 1.3.6.1.4.1.890.1.5.8.13.28.2.1.1 | ColumnmvrVlanID | read-only | mandatory | 1..4094 |
| 1.3.6.1.4.1.890.1.5.8.13.28.2.1.2 | ColumnmvrName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.2.1.3 | ColumnmvrMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.2.1.4 | ColumnmvrRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.3 | TablemvrPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.3.1 | RowmvrPortEntry | not-accessible | mandatory | An entry in mvrPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.28.3.1.1 | ColumnmvrPortRole | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.3.1.2 | ColumnmvrPortTagging | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.4 | ScalarmaxNumberOfMvrGroup | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.5 | TablemvrGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.5.1 | RowmvrGroupEntry | not-accessible | mandatory | An entry in mvrGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.13.28.5.1.1 | ColumnmvrGroupName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.5.1.2 | ColumnmvrGroupStartAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.5.1.3 | ColumnmvrGroupEndAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.28.5.1.4 | ColumnmvrGroupRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.29 | Nodelayer3Setup | |||
| 1.3.6.1.4.1.890.1.5.8.13.29.1 | ScalarrouterRipState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.29.2 | ScalarrouterIgmpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.29.3 | ScalarrouterDvmrpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.29.4 | ScalarrouterDvmrpThreshold | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.30 | NoderouterIpmcPortSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.30.1 | TablerouterIpmcPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.30.1.1 | RowrouterIpmcPortEntry | not-accessible | mandatory | An entry in routerIpmcPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.30.1.1.1 | ColumnrouterIpmcPortEgressUntagVlan | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31 | NoderouterVrrpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.31.1 | ScalarrouterVrrpMaxNumber | read-only | mandatory | Always set it as 14. |
| 1.3.6.1.4.1.890.1.5.8.13.31.2 | TablerouterVrrpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1 | RowrouterVrrpEntry | not-accessible | mandatory | An entry in routerVrrpTable. |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.1 | ColumnrouterVrrpVirtualID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.2 | ColumnrouterVrrpUplinkGateway | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.3 | ColumnrouterVrrpPreempt | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.4 | ColumnrouterVrrpInterval | read-write | mandatory | 1-255 |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.5 | ColumnrouterVrrpPriority | read-write | mandatory | 1-254 |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.6 | ColumnrouterVrrpPrimaryVirtualIP | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.7 | ColumnrouterVrrpName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.8 | ColumnrouterVrrpSecondaryVirtualIP | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.2.1.9 | ColumnrpVrrpRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.3 | TablerouterVrrpDomainTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.3.1 | RowrouterVrrpDomainEntry | not-accessible | mandatory | An entry in routerVrrpTable. |
| 1.3.6.1.4.1.890.1.5.8.13.31.3.1.1 | ColumnrouterVrrpAuthType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.31.3.1.2 | ColumnrouterVrrpAuthKey | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.32 | NoderouterVrrpStatus | |||
| 1.3.6.1.4.1.890.1.5.8.13.32.1 | TablerouterVrrpStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.32.1.1 | RowrouterVrrpStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.32.1.1.1 | ColumnrouterVrrpStatusIpAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.32.1.1.2 | ColumnrouterVrrpStatusIpMaskBits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.32.1.1.3 | ColumnrouterVrrpStatusVirtualID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.32.1.1.4 | ColumnrouterVrrpStatusVRStatus | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.32.1.1.5 | ColumnrouterVrrpStatusUpLinkStatus | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33 | NoderouterDomainSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.33.1 | TablerouterDomainTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.1.1 | RowrouterDomainEntry | not-accessible | mandatory | An entry in routerDomainTable. |
| 1.3.6.1.4.1.890.1.5.8.13.33.1.1.1 | ColumnrouterDomainIpAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.1.1.2 | ColumnrouterDomainIpMaskBits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.1.1.3 | ColumnrouterDomainVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.2 | TablerouterDomainIpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.2.1 | RowrouterDomainIpEntry | not-accessible | mandatory | An entry in routerDomainIpTable. |
| 1.3.6.1.4.1.890.1.5.8.13.33.2.1.1 | ColumnrouterDomainIpRipDirection | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.2.1.2 | ColumnrouterDomainIpRipVersion | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.2.1.3 | ColumnrouterDomainIpIgmpVersion | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.33.2.1.4 | ColumnrouterDomainIpDvmrp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.34 | NodediffservSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.34.1 | ScalardiffservState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.34.2 | TablediffservMapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.34.2.1 | RowdiffservMapEntry | not-accessible | mandatory | An entry in diffservMapTable. |
| 1.3.6.1.4.1.890.1.5.8.13.34.2.1.1 | ColumndiffservMapDscp | read-only | mandatory | 0-63 |
| 1.3.6.1.4.1.890.1.5.8.13.34.2.1.2 | ColumndiffservMapPriority | read-write | mandatory | 0-7 |
| 1.3.6.1.4.1.890.1.5.8.13.34.3 | TablediffservPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.34.3.1 | RowdiffservPortEntry | not-accessible | mandatory | An entry in diffservPortTable. |
| 1.3.6.1.4.1.890.1.5.8.13.34.3.1.1 | ColumndiffservPortState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35 | NodeclusterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.13.35.1 | NodeclusterManager | |||
| 1.3.6.1.4.1.890.1.5.8.13.35.1.1 | ScalarclusterMaxNumOfManager | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.1.2 | TableclusterManagerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.1.2.1 | RowclusterManagerEntry | not-accessible | mandatory | An entry in clusterManagerTable. |
| 1.3.6.1.4.1.890.1.5.8.13.35.1.2.1.1 | ColumnclusterManagerVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.1.2.1.2 | ColumnclusterManagerName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.1.2.1.3 | ColumnclusterManagerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.2 | NodeclusterMembers | |||
| 1.3.6.1.4.1.890.1.5.8.13.35.2.1 | ScalarclusterMaxNumOfMember | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.2.2 | TableclusterMemberTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.2.2.1 | RowclusterMemberEntry | not-accessible | mandatory | An entry in clusterMemberTable. |
| 1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.1 | ColumnclusterMemberMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.2 | ColumnclusterMemberName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.3 | ColumnclusterMemberModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.4 | ColumnclusterMemberPassword | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.5 | ColumnclusterMemberRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.3 | NodeclusterCandidates | |||
| 1.3.6.1.4.1.890.1.5.8.13.35.3.1 | TableclusterCandidateTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.3.1.1 | RowclusterCandidateEntry | not-accessible | mandatory | An entry in clusterCandidateTable. |
| 1.3.6.1.4.1.890.1.5.8.13.35.3.1.1.1 | ColumnclusterCandidateMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.3.1.1.2 | ColumnclusterCandidateName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.3.1.1.3 | ColumnclusterCandidateModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4 | NodeclusterStatus | |||
| 1.3.6.1.4.1.890.1.5.8.13.35.4.1 | ScalarclusterStatusRole | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.2 | ScalarclusterStatusManager | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.3 | ScalarclsuterStatusMaxNumOfMember | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.4 | TableclusterStatusMemberTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.4.1 | RowclusterStatusMemberEntry | not-accessible | mandatory | An entry in clusterStatusMemberTable. |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.1 | ColumnclusterStatusMemberMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.2 | ColumnclusterStatusMemberName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.3 | ColumnclusterStatusMemberModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.4 | ColumnclusterStatusMemberStatus | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.36 | IdentityfaultMIB | Fault event table definitions | ||
| 1.3.6.1.4.1.890.1.5.8.13.36.1 | NodeeventObjects | |||
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1 | TableeventTable | not-accessible | current | A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault… |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1 | RoweventEntry | not-accessible | current | An entry containing information about an event in the event table. |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.1 | ColumneventSeqNum | read-only | current | This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps a… |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.2 | ColumneventEventId | read-only | current | This variable represents the event ID which uniquely identifies the event in the entire system. |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.3 | ColumneventName | read-only | current | This variable represents the name of the event, for example 'Ethernet Link Down' |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.4 | ColumneventInstanceType | read-only | current | This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generat… |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.5 | ColumneventInstanceId | read-only | current | This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this e… |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.6 | ColumneventInstanceName | read-only | current | This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooli… |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.7 | ColumneventSeverity | read-only | current | This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events a… |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.8 | ColumneventSetTime | read-only | current | This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM. |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.9 | ColumneventDescription | read-only | current | This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating… |
| 1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.10 | ColumneventServAffective | read-only | current | This variable indicates whether the event is service affective or not |
| 1.3.6.1.4.1.890.1.5.8.13.37 | IdentityfaultTrapsMIB | Fault event trap definitions | ||
| 1.3.6.1.4.1.890.1.5.8.13.37.1 | NodetrapInfoObjects | |||
| 1.3.6.1.4.1.890.1.5.8.13.37.1.1 | ScalartrapRefSeqNum | read-only | current | Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.13.37.1.2 | ScalartrapPersistence | read-only | current | Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap … |
| 1.3.6.1.4.1.890.1.5.8.13.37.1.3 | ScalartrapSenderNodeId | read-only | current | Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.13.37.2 | NodetrapNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.13.37.2.1 | NotificationeventOnTrap | current | This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not… | |
| 1.3.6.1.4.1.890.1.5.8.13.37.2.2 | NotificationeventClearedTrap | current | This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqN… | |
| 1.3.6.1.4.1.890.1.5.8.13.38 | NodeipStatus | |||
| 1.3.6.1.4.1.890.1.5.8.13.38.1 | TableipStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.38.1.1 | RowipStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.38.1.1.1 | ColumnipStatusIPAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.38.1.1.2 | ColumnipStatusVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.38.1.1.3 | ColumnipStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.38.1.1.4 | ColumnipStatusType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39 | NoderoutingStatus | |||
| 1.3.6.1.4.1.890.1.5.8.13.39.1 | TableroutingStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39.1.1 | RowroutingStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39.1.1.1 | ColumnroutingStatusDestAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39.1.1.2 | ColumnroutingStatusDestMaskbits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39.1.1.3 | ColumnroutingStatusGateway | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39.1.1.4 | ColumnroutingStatusInterface | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39.1.1.5 | ColumnroutingStatusMetric | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.39.1.1.6 | ColumnroutingStatusType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40 | NodeospfExt | |||
| 1.3.6.1.4.1.890.1.5.8.13.40.1 | TableospfInterfaceTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1 | RowospfInterfaceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1.1 | ColumnospfIfKeyId | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1.2 | ColumnospfIfMaskbits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1.3 | ColumnospfIfDesignatedRouterID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1.4 | ColumnospfIfBackupDesignatedRouterID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1.5 | ColumnospfIfNbrCount | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1.6 | ColumnospfIfAdjacentNbrCount | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.1.1.7 | ColumnospfIfHelloDueTime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.2 | TableospfAreaExtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.2.1 | RowospfAreaExtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.2.1.1 | ColumnospfAreaExtName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.3 | TableospfRedistributeRouteTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.3.1 | RowospfRedistributeRouteEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.3.1.1 | ColumnospfRedistributeRouteProtocol | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.3.1.2 | ColumnospfRedistributeRouteState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.3.1.3 | ColumnospfRedistributeRouteType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.3.1.4 | ColumnospfRedistributeRouteMetric | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4 | TableospfNbrExtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4.1 | RowospfNbrExtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4.1.1 | ColumnospfNbrExtRole | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4.1.2 | ColumnospfNbrExtDeadtime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4.1.3 | ColumnospfNbrExtInterface | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4.1.4 | ColumnospfNbrExtRXmtL | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4.1.5 | ColumnospfNbrExtRqstL | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.4.1.6 | ColumnospfNbrExtDBsmL | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.5 | TableospfLsdbExtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.5.1 | RowospfLsdbExtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.5.1.1 | ColumnospfLsdbExtLinkCount | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.5.1.2 | ColumnospfLsdbExtRouteAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.5.1.3 | ColumnospfLsdbExtRouteMaskbits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.6 | TableospfVirtualLinkTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.6.1 | RowospfVirtualLinkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.6.1.1 | ColumnospfVirtualLinkName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.13.40.6.1.2 | ColumnospfVirtualLinkKeyId | read-write | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EventIdNumber | Integer32 | current | This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber. |
| EventPersistence | INTEGER{ normal (1), delta (2) } | current | This textual convention indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). |
| EventServiceAffective | INTEGER{ noServiceAffected (1), serviceAffected (2) } | current | This textual convention indicates whether an event is immediately service affecting or not. |
| EventSeverity | INTEGER{ critical (1), major (2), minor (3), informational (4) } | current | This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention. |
| InstanceType | INTEGER { unknown (1), node (2), shelf (3), line (4), switch (5), lsp (6), l2Interface(7), l3Interface(8), rowIndex(9) } | current | This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified below to enable… |
| UtcTimeStamp | Unsigned32 | current | Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM. |