ZhoneGR303-MIB
104 objects
The MIB module to describe objects for GR-303. It is based on the Generic Requirements document for GR-303, referred to as GR-303-CORE. The Generic Requirements (GR) document describes Bellcore's view of the overall system functions and performance levels required when a Digital Loop Carrier System (DLC) is integrated into a Local Digital Switch (LDS). It further describes a generic interface, one particular means of interfacing a DLC Remote Digital Terminal (RDT) with the LDS. The proposed overall system requirements for Integrated Digital Loop Carrier (IDLC) systems are expressed in terms of functions, i.e., what the combination of RDT and LDS must do when connected together. These end-to-end system requirements are grouped into functional categories dealing with (1) Customer services, (2) Digital network interfaces, (3) Operations Systems interfaces, (4) Craft interfaces, and (5) Overall system capabilities. These proposed requirements do not specify or imply any specific supplier implementation. They are, therefore, termed generic system requirements.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| PerfHist-TC-MIB | PerfCurrentCount |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| Zhone | zhoneVoice |
| ZHONE-SYSTEM-MIB | zhoneSystemConfigurationDateAndTime |
| Zhone-TC | ZhoneAdminString ZhoneRowStatus ZhoneShelfValueOrZero ZhoneSlotValueOrZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.4.3.1 | IdentityzhoneGR303 | of | The MIB module to describe objects for GR-303. It is based on the Generic Requirements document for GR-303, referred to as GR-303-CORE. The Generic Requirement… | |
| 1.3.6.1.4.1.5504.4.3.1.1 | TableinterfaceGroupTable | not-accessible | current | The GR-303 Interface Group Table. Minimum granularity for GR-303 provisioning is the Interface Group (IG) abstraction aka Internal Group. The Interface Group T… |
| 1.3.6.1.4.1.5504.4.3.1.1.1 | RowinterfaceGroupEntry | not-accessible | current | An entry in the interfaceGroupTable. Indexed by igNameId. Interface Groups can span multiple cards and shelves. A row in this table is created by setting the v… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.1 | ColumnigNameId | not-accessible | current | The Interface Group name is a unique symbolic name that is used for call routing. The maximum length for this name is 32 characters. Its value cannot be modifi… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.2 | ColumnigShelf | read-only | current | The shelf where this Interface Group and GR-303 stack resides. Range of valid values is 0-255. A value of 0 indicates the Interface Group is not currently inst… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.3 | ColumnigSlot | read-only | current | The slot where this Interface Group and GR-303 stack resides. Range of valid values is 0-17. A value of 0 indicates the Interface Group is not currently instal… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.4 | ColumnigPeerShelf | read-only | current | The shelf where this Redundancy Group's peer (or standby) resides. Peer shelf and peer slot define where this peer Interface Group and GR-303 stack resides. Ra… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.5 | ColumnigPeerSlot | read-only | current | The slot where this Interface Group's peer (or standby) resides. Peer shelf and peer slot define where this Interface Group peer and GR-303 stack resides. Rang… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.6 | ColumnigSwitchType | read-create | current | The switch vendor for the Interface Group. The following switch types are defined: unknown, lucent_5ess, nortel_dms-100, lucent_gtd5, santera_santeraOne, telic… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.7 | ColumnigPrimaryEocTmcDs1IfIndex | read-only | current | For systems that support more than one DS1, protection switching for the Embedded Operations Channel (EOC) and a Time-slot Management Channel (TMC) is mandator… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.8 | ColumnigSecondaryEocTmcDs1IfIndex | read-only | current | Refer to the description for igPrimaryEocTmcDs1IfIndex. This object refers to the ifIndex for the DS1 line supporting the standy EOC and TMC path protection sw… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.9 | ColumnigAdminStatus | read-create | current | GR-303-CORE The following requirements on status and control of the overall RDT and IDT may also be used during service assurance (e.g., placing out-of-service… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.10 | ColumnigOperationalStatus | read-only | current | GR-303-CORE R5-22 [274] Upon request by a remote managing system (eg, ZMS), an RDT shall provide a managing system with the RDT operational status indicating w… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.11 | ColumnigPeerStatus | read-only | current | The status of the peer (or standby) Interface Group Valid peer status values are * noStandbyConfigured * configuredAndAvailable * configuredAndUnavailable |
| 1.3.6.1.4.1.5504.4.3.1.1.1.12 | ColumnigMaxConfigCalls | read-only | current | GR-303-CORE 1.3.2 Generic IDLC Interface Requirements Summary. The Generic IDLC Interface uses a separate 64-kb/s data link (DS0-channel) to perform per-call t… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.13 | ColumnigCurrActiveCalls | read-only | current | The number of calls currently in use. igCurrActiveCalls is used in conjunction with igMaxActiveCalls, the maximum number of calls available, to provide a metri… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.14 | ColumnigStatsTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the current collection period. If, for some reason, such as an adjustment in the system's time-o… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.15 | ColumnigStatsValidIntervals | read-only | current | The number of previous intervals for which data was collected. The value will typically be 24, 48, 72, or 96 unless the interface group was brought online with… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.16 | ColumnigStatsInvalidIntervals | read-only | current | The number of intervals in the range from 0 to igStatsValidIntervals for which no data is available. This object will typically be zero except in cases where t… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.17 | ColumnigRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) igRowStatus set to'CreateAndGo'… |
| 1.3.6.1.4.1.5504.4.3.1.1.1.18 | ColumnigWorkingMode | read-create | current | Working mode indicates whether the selected switch can configure the RDT using common management information service (CMIS) over the Embedded Operations Channe… |
| 1.3.6.1.4.1.5504.4.3.1.2 | TableigControlChannelTable | not-accessible | current | The GR-303 Interface Group Control Channel Table. The maximum number of entries is identical to that of the Interface Group Table. the interfaceGroupTable is t… |
| 1.3.6.1.4.1.5504.4.3.1.2.1 | RowigControlChannelEntry | not-accessible | current | An entry in the igControlChannelTable which AUGMENTs the base table interfaceGroupTable. There is a 1-to-1 correspondence between rows in interfaceGroupTable a… |
| 1.3.6.1.4.1.5504.4.3.1.2.1.1 | ColumnigControlChannelTmcPrimarySvcState | read-only | current | Represents conditions that are currently present at the given entity and can affect the service state. Valid values are active, standby, outOfService. |
| 1.3.6.1.4.1.5504.4.3.1.2.1.2 | ColumnigControlChannelTmcSecondarySvcState | read-only | current | Represents conditions that are currently present at the given entity and can affect the service state. Valid values are active, standby, outOfService. |
| 1.3.6.1.4.1.5504.4.3.1.2.1.3 | ColumnigControlChannelT303 | read-create | current | Value of the T303 timer for the Q931 protocol 12.5.5.17.1 T303 T303 is the length of time that the IDT and RDT will wait for a reply to a SETUP message. R12-44… |
| 1.3.6.1.4.1.5504.4.3.1.2.1.4 | ColumnigControlChannelT396 | read-create | current | Value of the T396 timer for the Q931 protocol. 12.5.5.17.9 T396 T396 is the length of time that the RDT will wait for a reply to a SETUP message following the … |
| 1.3.6.1.4.1.5504.4.3.1.2.1.5 | ColumnigSapi0MaxOutstandingFrames | read-create | current | R5-97 [339] For each data link service access point (i.e., each SAPI=0 and SAPI=1, for both the active and standby data links, per IG), an RDT and an IDT shall… |
| 1.3.6.1.4.1.5504.4.3.1.2.1.6 | ColumnigSapi0N200 | read-create | current | R5-97 [339] For each data link service access point (i.e., each SAPI=0 and SAPI=1, for both the active and standby data links, per IG), an RDT and an IDT shall… |
| 1.3.6.1.4.1.5504.4.3.1.2.1.7 | ColumnigSapi0T200 | read-create | current | R5-97 [339] For each data link service access point (i.e., each SAPI=0 and SAPI=1, for both the active and standby data links, per IG), an RDT and an IDT shall… |
| 1.3.6.1.4.1.5504.4.3.1.2.1.8 | ColumnigSapi0T203 | read-create | current | R5-97 [339] For each data link service access point (i.e., each SAPI=0 and SAPI=1, for both the active and standby data links, per IG), an RDT and an IDT shall… |
| 1.3.6.1.4.1.5504.4.3.1.2.1.9 | ColumnigSapi0PpsMode | read-create | current | DS1 protection switching option. Valid values are inhibit, notInhibited and notApplicable. Note that SAPI 0 and SAPI 1 (EOC-TMC) are not switched together. 6.2… |
| 1.3.6.1.4.1.5504.4.3.1.2.1.10 | ColumnigSapi1MaxOutstandingFrames | read-create | current | Refer to igSapi0MaxOutstandingFrames Not supported. |
| 1.3.6.1.4.1.5504.4.3.1.2.1.11 | ColumnigSapi1N200 | read-create | current | Refer to igSapi0N200 Not supported. |
| 1.3.6.1.4.1.5504.4.3.1.2.1.12 | ColumnigSapi1T200 | read-create | current | Refer to igSapi0T200 |
| 1.3.6.1.4.1.5504.4.3.1.2.1.13 | ColumnigSapi1T203 | read-create | current | Refer to igSapi0T203 |
| 1.3.6.1.4.1.5504.4.3.1.2.1.14 | ColumnigSapi1PpsMode | read-create | current | Refer to igSapi0PpsMode |
| 1.3.6.1.4.1.5504.4.3.1.2.1.15 | ColumnigControlChannelEocPrimarySvcState | read-only | current | Represents conditions that are currently present at the given entity and can affect the service state. Valid values are active, standby, outOfService. |
| 1.3.6.1.4.1.5504.4.3.1.2.1.17 | ColumnigControlChannelEocSecondarySvcState | read-only | current | Represents conditions that are currently present at the given entity and can affect the service state. Valid values are active, standby, outOfService. |
| 1.3.6.1.4.1.5504.4.3.1.3 | TableigStatsCurrentTable | not-accessible | current | The GR-303 Interface Group Statistics Current Table. The GR-303 Interface Group Statistics current table contains various statistics being collected for the cu… |
| 1.3.6.1.4.1.5504.4.3.1.3.1 | RowigStatsCurrentEntry | not-accessible | current | An entry in the igStatsCurrentTable which AUGMENTs the base table interfaceGroupTable. There is a 1-to-1 correspondence between rows in interfaceGroupTable and… |
| 1.3.6.1.4.1.5504.4.3.1.3.1.1 | ColumnigCurrentOutboundCalls | read-only | current | The number of outbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.1.3.1.2 | ColumnigCurrentInboundCalls | read-only | current | The number of inbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.1.3.1.3 | ColumnigCurrentOutboundCallsBlocked | read-only | current | The number of outbound calls that were blocked due to no available time-slot. |
| 1.3.6.1.4.1.5504.4.3.1.3.1.4 | ColumnigCurrentGR303ProtocolErrors | read-only | current | The number of GR-303 Protocol errors. |
| 1.3.6.1.4.1.5504.4.3.1.3.1.5 | ColumnigCurrentTMCLapdSent | read-only | current | The number of LAPD frames sent on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.3.1.6 | ColumnigCurrentTMCLapdRcvd | read-only | current | The number LAPD frames received on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.3.1.7 | ColumnigCurrentTMCLapdRcvdErrs | read-only | current | The number LAPD frames received in error on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.3.1.8 | ColumnigCurrentEOCLapdSent | read-only | current | The number of LAPD frames sent on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.3.1.9 | ColumnigCurrentEOCLapdRcvd | read-only | current | The number of LAPD frames received on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.3.1.10 | ColumnigCurrentEOCLapdRcvdErrs | read-only | current | The number of LAPD frames received in error on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.4 | TableigStatsIntervalTable | not-accessible | current | GR-303 Interface Group Statistics Interval Table. The GR-303 Interface Group Statistics Interval Table contains various statistics collected by each Interface … |
| 1.3.6.1.4.1.5504.4.3.1.4.1 | RowigStatsIntervalEntry | not-accessible | current | An entry in the igStatsIntervalTable. Indexed by (igNameId, igIntervalNumber). |
| 1.3.6.1.4.1.5504.4.3.1.4.1.1 | ColumnigIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.5504.4.3.1.4.1.2 | ColumnigIntervalOutboundCalls | read-only | current | The number of outbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.1.4.1.3 | ColumnigIntervalInboundCalls | read-only | current | The number of inbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.1.4.1.4 | ColumnigIntervalOutboundCallsBlocked | read-only | current | The number of outbound calls that were blocked due to no available time-slot. |
| 1.3.6.1.4.1.5504.4.3.1.4.1.5 | ColumnigIntervalGR303ProtocolErrors | read-only | current | The number of GR-303 Protocol errors. |
| 1.3.6.1.4.1.5504.4.3.1.4.1.6 | ColumnigIntervalTMCLapdSent | read-only | current | The number of LAPD frames sent on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.4.1.7 | ColumnigIntervalTMCLapdRcvd | read-only | current | The number LAPD frames received on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.4.1.8 | ColumnigintervalTMCLapdRcvdErrs | read-only | current | The number LAPD frames received in error on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.4.1.9 | ColumnigIntervalEOCLapdSent | read-only | current | The number of LAPD frames sent on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.4.1.10 | ColumnigIntervalEOCLapdRcvd | read-only | current | The number of LAPD frames received on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.4.1.11 | ColumnigIntervalEOCLapdRcvdErrs | read-only | current | The number of LAPD frames received in error on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.4.1.12 | ColumnigIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.5504.4.3.1.5 | TableigStatsTotalTable | not-accessible | current | GR-303 Interface Group Statistics Total Table. The GR-303 Interface Group Statistics Total Table contains the cumulative sum of the various statistics for the … |
| 1.3.6.1.4.1.5504.4.3.1.5.1 | RowigStatsTotalEntry | not-accessible | current | An entry in the igStatsTotalTable which AUGMENTs the base table interfaceGroupTable. There is a 1-to-1 correspondence between rows in interfaceGroupTable and r… |
| 1.3.6.1.4.1.5504.4.3.1.5.1.1 | ColumnigTotalOutboundCalls | read-only | current | The number of outbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.1.5.1.2 | ColumnigTotalInboundCalls | read-only | current | The number of inbound calls completed. |
| 1.3.6.1.4.1.5504.4.3.1.5.1.3 | ColumnigTotalOutboundCallsBlocked | read-only | current | The number of outbound calls that were blocked due to no available time-slot. |
| 1.3.6.1.4.1.5504.4.3.1.5.1.4 | ColumnigTotalGR303ProtocolErrors | read-only | current | The number of GR-303 Protocol errors. |
| 1.3.6.1.4.1.5504.4.3.1.5.1.5 | ColumnigTotalTMCLapdSent | read-only | current | The number of LAPD frames sent on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.5.1.6 | ColumnigTotalTMCLapdRcvd | read-only | current | The number LAPD frames received on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.5.1.7 | ColumnigTotalTMCLapdRcvdErrs | read-only | current | The number LAPD frames received in error on the Time-slot Management Channel (TMC). |
| 1.3.6.1.4.1.5504.4.3.1.5.1.8 | ColumnigTotalEOCLapdSent | read-only | current | The number of LAPD frames sent on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.5.1.9 | ColumnigTotalEOCLapdRcvd | read-only | current | The number of LAPD frames received on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.5.1.10 | ColumnigTotalEOCLapdRcvdErrs | read-only | current | The number of LAPD frames received in error on the Embedded Operations Channel (EOC). |
| 1.3.6.1.4.1.5504.4.3.1.6 | Tableds1LineMappingTable | not-accessible | current | The GR-303 DS1 Line Mapping Table. The DS1 Line Mapping Table describes attributes for DS1 Line Termination and the mapping between the Interface Group and DS1… |
| 1.3.6.1.4.1.5504.4.3.1.6.1 | Rowds1LineMappingEntry | not-accessible | current | An entry in the ds1LineMappingTable. Indexed by (igNameId, dsnLgId, ds1ChannelNumber). A row in this table is created by setting the value of ds1LineMappingRow… |
| 1.3.6.1.4.1.5504.4.3.1.6.1.1 | ColumndsnLgId | not-accessible | current | The dsnLgId object identifies the line group entry id of either a physical T1 line group ID (eg, Dibrizzi) or a channelized DS3. If LgId represents a physical … |
| 1.3.6.1.4.1.5504.4.3.1.6.1.2 | Columnds1ChannelNumber | not-accessible | current | Identifies the DS1 for the channelized DS3 or physical T1. The ds1ChannelNumber for a T1 is 1, otherwise it refers to the channel number of the DS3 port which … |
| 1.3.6.1.4.1.5504.4.3.1.6.1.3 | Columnds1Role | read-create | current | The role the DS1 line assumes. Valid values are payload, secondary, primary. This field is mandatory for ds1LineMapping row creation. |
| 1.3.6.1.4.1.5504.4.3.1.6.1.4 | Columnds1IfIndex | read-only | current | The ifIndex for the DS1 line. The value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). The value will be zero… |
| 1.3.6.1.4.1.5504.4.3.1.6.1.5 | Columnds1LineMappingRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) ds1LineMappingRowStatus set to'… |
| 1.3.6.1.4.1.5504.4.3.1.6.1.6 | Columnds1LogicalId | read-create | current | This is an unique number to identify each physical DS1 within an Interface Group between RDT and IDT. The DS1 Logical ID must have a value in the range of 1..2… |
| 1.3.6.1.4.1.5504.4.3.1.7 | TableigCrvTable | not-accessible | current | The GR-303 CRV Table. The GR-303-CORE interface uses the Call Reference Value (CRV) in its Timeslot Management Channel (TMC) to dynamically assign DS0s to acce… |
| 1.3.6.1.4.1.5504.4.3.1.7.1 | RowigCrvEntry | not-accessible | current | An entry in the igCrvTable. Indexed by (igNameId, igCrv). A row in this table is created by setting the value of igCrvRowStatus to 'CreateAndGo', and setting t… |
| 1.3.6.1.4.1.5504.4.3.1.7.1.1 | ColumnigCrv | not-accessible | current | The Call Reference Value (CRV) for the line. Indexes into the igCrvTable. Valid range is 1-2048. |
| 1.3.6.1.4.1.5504.4.3.1.7.1.2 | ColumnigCrvLocalAdminState | read-create | current | The admin state on the local (RDT) side. Valid values are inService and OutOfService. This field is mandatory for IG CRV row creation. |
| 1.3.6.1.4.1.5504.4.3.1.7.1.3 | ColumnigCrvRemoteAdminState | read-only | current | The admin state on the remote (IDT) side. Valid values are inService and OutOfService. For CRVs assocated with an IG with igWorkingMode set to passive, the rem… |
| 1.3.6.1.4.1.5504.4.3.1.7.1.4 | ColumnigCrvOperStatus | read-only | current | The line operational status is the composition (ie, logical OR'ing) of definitions from GR-303-CORE. Some of them are service affecting, some of them don't aff… |
| 1.3.6.1.4.1.5504.4.3.1.7.1.5 | ColumnigCrvTmcState | read-only | current | Time-slot Management Channel (TMC) state indicates when the line is off-hook. Valid states are inService and permanentSignal. The default value is inService. A… |
| 1.3.6.1.4.1.5504.4.3.1.7.1.6 | ColumnigCrvSignalType | read-create | current | Signaling type specifies the signaling method currently used by this crv. Valid types are loop start,ground start or loop reverse battery for analog line and e… |
| 1.3.6.1.4.1.5504.4.3.1.7.1.7 | ColumnigCrvRowStatus | read-create | current | Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) igCrvRowStatus set to'CreateAnd… |
| 1.3.6.1.4.1.5504.4.3.1.8 | Identitygr303Traps | current | All the Zhone trap notifications for GR303 managed objectes will be defined under gr303Traps. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0 | Identitygr303TrapsPrefix | current | This is the 0 prefix which is required for all GR303 traps defined in SNMPv2. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.1 | NotificationigOperStatusChange | current | A notification is sent when the operating status of the IG changes. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.2 | NotificationigTmcPrimaryStateChange | current | A notification is sent when the status of the TMC channel on the primary DS1 changes. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.3 | NotificationigTmcSecondaryStateChange | current | A notification is sent when the status of the TMC channel on the sedondary DS1 changes. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.4 | NotificationigEocPrimaryStateChange | current | A notification is sent when the status of the EOC channel on the primary DS1 changes. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.5 | NotificationigEocSecondaryStateChange | current | A notification is sent when the status of the EOC channel on the secondary DS1 changes. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.6 | NotificationigCrvRemoteStateChange | current | A notification is sent when switch removes a CRV from operation or restores the CRV to opearation. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.7 | NotificationigCrvTmcStateChange | current | A notification is sent when igCrvTmcState changes. | |
| 1.3.6.1.4.1.5504.4.3.1.8.0.8 | NotificationigSystemTimeChange | current | When an IG is connected to a 5ESS switch, the switch will synchronize system time with the RDT. |