agnFunction
OBJECT-TYPE
1.3.6.1.4.1.164.6.2.45.1.1
Description
This MIB object indicates the function that will be enabled or disabled in the device. alarmForwarding= Fault Propagation (usually towards user port). For Vmux: routing (2) - enable/disable Router backup (3) - enable/disable Backup between E1/T1/Serial Link and ETH. uplinkLoopDetect (5) - enable/disable Loop Detection on the TDM Uplink. systemClock (6) - enable/disable the System Clock. nps (7) - N+1 Protection Switching device physically connected to I/O modules in Gmux2000. ethOamCfm (8) - denotes that the device supports ETH OAM CFM (802.1ag). The list of supported CFM attributes is specified in agnFunctionAttributes. Different from the other functions, the manager cannot activate the CFM. agnFunctionActivation is set only by the agent. A value of enable (3) denotes that the device supports ETH OAM CFM. fileTransfer (9) - denotes that the device supports file transfer functions and agnFunctionAttributes object which lists the supported functions. Similar to ETH OAM CFM, agnFunctionActivation is set only by the agent. A value of enable(3) denotes that the device supports file transfer functions and agnFunctionAttributes. erp (14) - Ethernet Ring Protection according to the G.8032 standard The general protection related capabilitites eps(15), tdmPwProtect(16), pathSdhSonetProtect(17), aps(18), ethPortProtect(19) and tdmPortProtect(20) are correlated to the definition of the ProtectClassType. eps (15) - Ethernet Protection Switching according to the G.8031 standard tdmPwProtect (16) - TDM PW protection pathSdhSonetProtect (17) - SDH/SONET VC Path Protection aps (18) - SONET (APS) or SDH (MSP) switching protection ethPortProtect (19) - Ethernet port protection tdmPortProtect (20)- TDM port protection tdmPw (21) - TDM PW functionality, for supported options see the agnFunctionAttributes below. fileSystem (22) - File System support ssfp (23) - Smart SFP support acl (32) - access control list (security) lldp (40) - Link Layer Discovery Protocol twamp (41) - Two Way Active Measurement Protocol flow (42) - flow vrrp (43) - Virtual Router Redundancy Protocol portFlowMirroring (45) - Port and flow mirroring ethPort (46) - Ethernet port capabilities dhcpL2Relay (47) - DHCP Layer 2 Relay nat (48) - Network Address Translator/Translation cellular (49) - Cellular
Syntax
INTEGER { routing (2), backup (3), alarmForwarding (4), uplinkLoopDetect (5), systemClock (6), nps (7), ethOamCfm (8), fileTransfer (9), netEq (10), ecan (11), cli (12), csm (13), erp (14), eps (15), tdmPwProtect (16), pathSdhSonetProtect (17), aps (18), ethPortProtect (19), tdmPortProtect (20), tdmPW (21), fileSystem (22), ssfp (23), ptp (24), copyFile (25), router (26), tbd (27), faultManagement (28), configChangeSync (29), binaryDataRetrievalMethod (30), bridge (31), acl (32), ospf (33), bgp (34), bfd (35), performanceManagement (36), ituSat (37), genericPpp (38), policer (39), lldp (40), twamp (41), flow (42), vrrp (43), l3Sat (44), portFlowMirroring (45), ethPort (46), dhcpL2Relay (47), nat (48), cellular (49) }