When equal to userControlled, no wireless radio settings will be changed as a result of receiving this element. Current setting will remain in effect. When equal to msoControlled24bgnMode, the current channel numbers and channel bandwidth selections will remain in effect. For devices with a single wireless network interface, all other wireless radio settings will be set so as to optimize support for a mixture of 802.11b/g/n devices using the 2.4GHz band. For devices with two wireless network interfaces, all other wireless radio settings for one radio will be set so as to optimize support for a mixture of 802.11b/g/n devices using the 2.4GHz band, while settings for the other radio will be set so as to optimize support for only 802.11n devices using the 5GHz band. All radios MUST be set to transmit at full power. When equal to msoControlled24nMode, the current channel numbers and channel bandwidth selections will remain in effect. For devices with a single wireless network interface, all other wireless radio settings will be set so as to optimize support for only 802.11n devices using the 2.4GHz band. For devices with two wireless network interfaces, all other wireless radio settings for one radio will be set so as to optimize support for only 802.11n devices using the 2.4GHz band, while settings for the other radio will be set so as to optimize support for only 802.11n devices using the 5GHz band. All radios MUST be set to transmit at full power. When equal to msoControlled50nMode, the current channel numbers and channel bandwidth selections will remain in effect. For devices with a single wireless network interface, all other wireless radio settings will be set so as to optimize support for only 802.11n devices using the 5GHz band. If the single wireless network interface does not support use of the 5GHz band, optimize support for only 802.11n devices using the 2.4GHz band. For devices with two wireless network interfaces, all other wireless radio settings for one radio will be set so as to optimize support for only 802.11n devices using the 2.4GHz band, while settings for the other radio will be set so as to optimize support for only 802.11n devices using the 5GHz band. All radios MUST be set to transmit at full power.