Test Status. Options: 1. startSuccessfully(1) -indicates start test successfully 2. stopSuccessfully(2) -indicates stop test successfully 3. sendDTMFSuccessfully(3) -indicates send DTMF successfully 4. testOuttime(4) -indicates test is time out 5. noDialtone(5) -indicates no dial tone 6. callerDialNumberAlready(6) -indicates that caller already dials a number 7. noRinging(7) -indicates on ringing 8. noRingbackTone(8) -indicates no ring back tone 9. waitingAgentMessageOuttime(9) -indicates that timed-out (waiting for EMS processing) 10. testingFailure(10) -indicates that test failure 11. agentMessageAck(11) -indicates that host responds to the EMS 12. calledoffhook(12) -indicates that off hook (called party) 13. testingAbnormal(13) -indicates test is abnormal 14. broadbandtesting(14) -indicates capture fail 15. capturefail(15) -indicates that line capture failure 16. notratb(16) -indicates that relay transfer board does not exist 17. configsuccessfully(17) -indicates configure successfully 18. ring(18) -indicates ringing 19. calleroffhook(19) -indicates that off hook (calling party) 20. playdialtone(20) -indicates that play the dial tone 21. dialnumbercomplete(21) -indicates that dialup is finished 22. idle(22) -indicates idle 23. receiving(23) -indicates receiving 24. ringingBack(24) -indicates ringing back 25. connect(25) -indicates that off hook (called party) 26. busyTone(26) -indicates busy tone 27. onHook(27) -indicates on hook 28. testEnd(28) -indicates that test is end 29. other(255) -other