Specify Equipment Configuration Partial Download pattern. If this object is set with ipeFsUpdateFileDetail, the system will perform the partial download, otherwise the system will perform the normal download. And Partial Download is performed only when Equipment Configuration Dowload. SYNTAX is 32bit string. The definition of each bit is shown below. - bit1-4: specify download mode. 0001 : normal mode other value : reserved (system rejects the request) - bit5-32: specify the equipment config part. Setting 1 to each bit means corresponding config download is activated. Bit5 : Equipment Configuration (must set when the normal mode) Bit6 : Radio Configuration Bit7 : Radio Configuration w/o Radio Frequency Bit6 and Bit7 cannot be set to 1 simultaneously. Bit8 : E1/STM1 Mapping (must set when Bit6 or Bit7 is activated) Bit9 : MODEM Function setting Bit10: ETH Function setting Bit11: E1/STM1/Cross Connect Setting Bit12: PWE Setting Bit13: Equipment Clock/Synchronization Setting Bit14: Relay-Alarm Mapping Bit15: V11/OW Setting Bit16: Alarm/AIS Setting Bit17: PMON/RMON Setting Bit18: AUX Setting other: reserved (don't care) Example) the pattern of downloading the equipment configuration, radio configuration, E1/STM1 mapping, ETH Function Setting on normal mode. ipeFsUpdateFileConfigPartial = '00011101010000000000000000000000'