iso/org/dod/internet/private/enterprises/.232/.167/.2/.4/.5/cpqWcrmWaterCoolUnitSensorTable/cpqWcrmWaterCoolUnitSensorEntry/waterCoolUnitSensorType
waterCoolUnitSensorType
OBJECT-TYPE
1.3.6.1.4.1.232.167.2.4.5.2.1.2
Description
Type of sensor which is connected to internal sensor to sensor[internalSensorIndex] 1: no sensor connected 2: sensor failure 3: value overflow 4: average temperature of air inlet to rack, average or max/min from each HEX 5: average temperature of air outlet from rack, average or max/min from each HEX 6: heatflow sensor 7: alarm: Bit 0: Leakage Bit 1: IIC Failure Bit 5: Front and Rear Door opened 8: warning: Bit 0..2: Fan Tach 1..3 Bit 3,4: Temp. sensor HEX1 In,Out Bit 5,6: Temp. sensor HEX2 In,Out Bit 7,8: Temp. sensor HEX3 In,Out Bit 9: Air temp. sensor Bit 10..12: IIC failure, HEX1..3 Bit 13: Waterflow low Bit 14,15: Watertemp. In,Out Bit 16: Waterflow sensor fail. Bit 17: Magnetic valve fail. Bit 18: Leakdetector fail. Bit 19: Uneven heat load Bit 20: Condensation Pump Cycles > Max Bit 21: Condensation Pump Running Time > Max Bit 22..24: Fan Tach 4..6 Bit 25: Temperature Warning air inlet Bit 27: Dewpoint warning Bit 28: Humidity sensor failed Bit 29: Front door access sensor failed Bit 30: Rear door access sensor failed 9: rpm speed of Fan1 10: rpm speed of Fan2 11: rpm speed of Fan3 12: fanSpeed setpoint, calculated from average temperatures 13: temperature air inlet to rack, HEX 1 14: temperature air outlet from rack, HEX 1 15: temperature air inlet to rack, HEX 1 16: temperature air outlet from rack, HEX 1 17: temperature air inlet to rack, HEX 1 18: temperature air outlet from rack, HEX 1 19: water temperature In 20: water temperature Out 21: water Flow 22: water valve status: MCS:0: Valve opened, 1: valve closed; MCSS: valve setpoint (%) 23: status: Bit 0..Bit 2: fan module 1..3 available Bit 3: water module available 24: condensation pump number of seconds on counter (last operating time) 25: condensation pump on/off cycle counter 26: rpm speed of Fan4 27: rpm speed of Fan5 28: rpm speed of Fan6 29: status of transfer switch, 1=AC1, 2=AC2, 3=AC1 and AC2 30: water valve actual value (%) 31: dewpoint value 32: found fans: Bit 0..5: Fan 1.. Fan 6 33: isolation valve inlet position 34: isolation valve facility position 35: isolation valve infrastructure position 36: control valve facility position 37: control valve infrastructure position 38: temperature 4 air inlet to rack 39: temperature 5 air inlet to rack 40: temperature 6 air inlet to rack 41: supply side water pressure 42: return side water pressure 43: air differential pressure 1 44: air differential pressure 2 45: AC input 1 46: AC input 2 47: front door status 48: rear door status 49: leakage level middle 50: leakage overflow 1 51: leakage overflow 2 52: condensate status 53: dew point value 2 54: humidity value 1 55: humidity value 2 56: condensation/leakage pump running 57: temperature value 1 58: temperature value 2 59: Dewpoint value average 60: percent speed of Fan1 61: percent speed of Fan2 62: percent speed of Fan3 63: percent speed of Fan4 64: percent speed of Fan5 65: percent speed of Fan6
Syntax
INTEGER { tempIn (4), warning (8), alarm (7), heatFlow (6), tempOut (5), rpmFan1 (9), rpmFan2 (10), rpmFan3 (11), fanSpeed (12), tempIn1 (13), tempOut1 (14), tempIn2 (15), tempOut2 (16), tempIn3 (17), tempOut3 (18), tempWaterIn (19), tempWaterOut (20), waterFlow (21), valve (22), status (23), condensateDuration (24), condensateCycles (25), rpmFan4 (26), rpmFan5 (27), rpmFan6 (28), transfSwitch(29), valveActValue(30), dewPointValue(31), foundFans(32), isolationValveInlet(33), isolationValveFacility(34), isolationValveInfrastructure(35), controlValveFacility (36), controlValveInfrastructure (37), tempIn4 (38), tempIn5 (39), tempIn6 (40), waterPressureSupply (41), waterPressureReturn (42), airDiffPressure1 (43), airDiffPressure2 (44), acInput1 (45), acInput2 (46), frontDoor (47), rearDoor (48), leakMidLevel (49), leakOverflow1 (50), leakOverflow2 (51), condensate (52), dewPointValue2 (53), humidityValue (54), humidityValue2 (55), pump (56), tempeValue1 (57), tempeValue2 (58), dewPointAverage(59), percentFan1 (60), percentFan2 (61), percentFan3 (62), percentFan4 (63), percentFan5 (64), percentFan6 (65) }