This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determines which of the outputs are to be considered (corresponding bit = 1) and which outputs are to ignore (corresponding bit = 0): OCTET 1 : unused OCTET 2: Bit 0-7: Mask for digital outputs 16-23 OCTET 3, Bit 0-7: Mask for digital outputs 8-15 OCTET 4, Bit 0-7: Mask for digital outputs 0-7 OCTETS 5-8 contain the level (1=HIGH, 0=LOW) which the outputs should assume: OCTET 5 : unused OCTET 6: Bit 0-7: Level of digital outputs 16-23 OCTET 7, Bit 0-7: Level of digital outputs 8-15 OCTET 8, Bit 0-7: Level of digital outputs 0-7 OCTETS 9-12 contain the ANY bit (1=ON, 0=OFF). Outputs masked with the any bit trigger with any change of the corresponding output bit. Settings in OCTET 5-9 are then unused: OCTET 9: unused OCTET 10, Bit 0-7: ANY bits of digital outputs 16-23 OCTET 11, Bit 0-7: ANY bits of digital outputs 8-15 OCTET 12, Bit 0-7: ANY bits of digital outputs 0-7