This variable allows setting of individual output trigger conditions. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. The first four OCTETS contain the mask which determines which of the outputs are to be considered (corresponding bit = 1) and which outputs are to ignore (corresponding bit = 0): OCTET 1 : unused OCTET 2 : unused OCTET 3 : unused OCTET 4, Bit 0-5: Mask for digital outputs 0-5 Bit 6-7: unused OCTETS 5-8 contain the level (1=HIGH, 0=LOW) which the outputs should assume: OCTET 5 : unused OCTET 6 : unused OCTET 7 : unused OCTET 8, Bit 0-5: Level of digital outputs 0-5 Bit 6-7: unused OCTETS 9-12 contain the ANY bit (1=ON, 0=OFF). Outputs masked with the any bit trigger with any change of the corresponding output bit. Settings in OCTET 5-9 are then unused: OCTET 9 : unused OCTET 10: unused OCTET 11: unused OCTET 12, Bit 0-5: ANY bits of digital outputs 0-5 Bit 6-7: unused