Current radio alarm status details. BIT Hex Decimal BIT NAME Number Value Value 0 0x01 1 RSSI_DEVIATION 1 0x02 2 IDU_OOL 2 0x04 4 ODU_TEMP_ALERT 3 0x08 8 RX_BER_ALARM 4 0x10 16 RX_EBNO_ALARM 5 0x20 32 (reserved) 6 0x40 64 (reserved) 7 0x80 128 (reserved) 8 0x100 256 IDU_EQUIP_FAIL 9 0x200 512 ODU_EQUIP_FAIL 10 0x400 1024 IDU_ODU_LINK_FAIL 11 0x800 2048 MC_CHANNEL_FAIL 12 0x1000 4096 (reserved) 13 0x2000 8192 (reserved) 14 0x4000 16384 (reserved) 15 0x8000 32768 SERVICE_AFFECTED IDU_EQUIP_FAIL - can be caused by: power supply failure, watchdog timeout, or other internal failure on indoor unit. IDU_ODU_LINK_FAIL - can be caused by: IDU/ODU cable failure, bad connection, or equipment failure IDU_OOL - can be caused by: intermittent loss of lock of internal clocks MC_CHANNEL_FAIL - can be caused by: Signal path (air) degradation, or internal equipment failure on near end or far end node. ODU_EQUIP_FAIL - can be caused by: Loss of frequency lock, loss of clock reference, power fault, excessive transmitter power, signal path degradation, frequency drift, or internal failure of equipment in outdoor unit. ODU_TEMP_ALERT - can be caused by: Operating temperature too high or too low. Allowable range of operating temperatures ( in ODU ) are -40C to +65C. RSSI_DEVIATION - can be caused by: signal path (air) degradation, excessive heat buildup at ODU, or frequency drift. RX_BER_ALARM - can be caused by: RF noise burst, fade burst, interference, or internal equipment failure. RX_EBNO_ALARM - can be caused by: Fade, noise burst, or internal equipment stress. SERVICE_AFFECTED - indicates a predicted loss of data or quality of service in transport due to any of the above conditions.