This field specifies the diagnostic to execute. The default value is 'selftest'. NOTE: not all of the individual diagnostics are available on every Zhone card type. NOTE: Zhone card types (cardZhoneType) are defined in the genCardResources.mib List of possible diagnostics: ============================ Common to all PLS cards selftest(1) - this diagnostic will execute all of the individual tests available on this card. Supports: diagStart, diagStop, diagRepetition. cardEEprom(3) - this diagnostic will verify the main card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. frbus(4) - this diagnostic will verify that the BAN slot card can access the Fhrame Bus by doing a loopback with 10 message of 100 bytes. Supports: diagStart, diagStop, diagRepetition. backPlane(12) - this diagnostic will verify that the BAN slot card can access the back plane by verifying the back plane EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. cardZhoneType::infoServices(3) specific supvBus(2) - this diagnostic will verify that the BAN slot card can access the supervisory Bus by doing a loopback of 20 bytes. Supports: diagStart, diagStop, diagRepetition. pcmcia(5) - this diagnostic will verify that the InfoServ card can access the PCMCIA flash card I/O by doing a file create, write, and read of length 4000 bytes. Supports: diagStart, diagStop, diagRepetition. shelfLamp(6) - this diagnostic will illuminate the shelf alarm indicators for a period of 1.5 seconds. The indicators will return to their original settings after the diagnostic completes. Supports: diagStart, diagStop, diagRepetition. realTimeClk(7) - this diagnostic will verify that the real time clock increments. Supports: diagStart, diagStop, diagRepetition. fanTray(8) - this diagnostic tests that the fan tray is operational by verifying the fan tray EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. shelfMonitor(9) - this diagnostic tests the shelf monitor board is operational by checking the POST status register and verifying the shelf monitor board EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. midPlane(13) - this diagnostic will verify that the mid plane card is present by verifying the mid plane card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. cardZhoneType::vasp(5) specific ioCard(10) - this diagnostic will verify that the I/O card is present by verifying the I/O card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. mezzanineCard(11) - this diagnostic will test that the mezzanine card is operational by verifying the mezzanine card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. cardZhoneType::t3Tdm(6) specific ioCard(10) - this diagnostic will verify that the I/O card is present by verifying the I/O card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. midPlane(13) - this diagnostic will verify that the mid plane card is present by verifying the mid plane card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. cardZhoneType::ethernet(9) specific midPlane(13) - this diagnostic will verify that the mid plane card is present by verifying the mid plane card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. cardZhoneType::hdsl2(10) specific ioCard(10) - this diagnostic will verify that the I/O card is present by verifying the I/O card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition. mezzanineCard(11) - this diagnostic will test that the mezzanine card is operational by verifying the mezzanine card EEPROM checksum. Supports: diagStart, diagStop, diagRepetition.