ASAM-SFP-MIB
243 objects
No module-level DESCRIPTION found.
Imported Objects
| ASAM-EQUIP-MIB | eqptSlotId EqptSlotIndex |
| ASAM-TC-MIB | AsamProfileIndex AsamProfileName AsamProfilePointer AsamProfileRefCount |
| BRIDGE-MIB | MacAddress |
| ITF-MIB | ifIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| RFC1213-MIB | PhysAddress |
| SNMPv2-TC | DisplayString RowStatus |
| SYSTEM-MIB | asam |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.637.61.1.56 | NodesfpMIB | |||
| 1.3.6.1.4.1.637.61.1.56.1 | TablehostSfpConfigTable | not-accessible | mandatory | This table contains the host shelf SFP direction configuration information. ALCATEL NOTE: TABLESIZE: 8 |
| 1.3.6.1.4.1.637.61.1.56.1.1 | RowhostSfpConfigEntry | not-accessible | mandatory | Each entry consists of a list of host shelf SFP configuration parameters. |
| 1.3.6.1.4.1.637.61.1.56.1.1.1 | ColumnhostConfigSfpFaceplateNumber | read-only | mandatory | This is host shelf SFP number on the faceplate. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1..17 DEFVALUE: NA UNITS: NA SPARSE: NO DES… |
| 1.3.6.1.4.1.637.61.1.56.1.1.2 | ColumnhostSfpDirection | read-write | mandatory | The host shelf SFP can be configured as downlink or uplink. The default is uplink. ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: NA DEF… |
| 1.3.6.1.4.1.637.61.1.56.2 | TablehostSfpConfigExtTable | not-accessible | mandatory | This table contains the host shelf SFP configuration information additional to the host SFP direction configuration. WARNING This table is now deprecated. ltHo… |
| 1.3.6.1.4.1.637.61.1.56.2.1 | RowhostSfpConfigExtEntry | not-accessible | mandatory | Each entry consists of a list of host shelf SFP configuration parameters which supplements the parameters in hostSfpConfigTable. WARNING This table is now depr… |
| 1.3.6.1.4.1.637.61.1.56.2.1.1 | ColumnhostConfigExtSfpFaceplateNumber | read-only | mandatory | This is the host shelf SFP number on the faceplate. WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead. ALCATEL NOTE: ACCESS:… |
| 1.3.6.1.4.1.637.61.1.56.2.1.2 | ColumnhostSfpCableToRack | read-write | mandatory | This is the Rack ID of the expansion shelf LSM which the host shelf SFP is planned to cable to. Value 0 means that no rack is specified. WARNING This table is … |
| 1.3.6.1.4.1.637.61.1.56.2.1.3 | ColumnhostSfpCableToShelf | read-write | mandatory | This is the Shelf ID of the expansion shelf LSM which the host shelf SFP is planned to cable to. Value 0 means that no shelf is specified. WARNING This table i… |
| 1.3.6.1.4.1.637.61.1.56.2.1.4 | ColumnhostSfpCableToSlot | read-write | mandatory | This is the Slot ID of the expansion shelf LSM which the host shelf SFP is planned to cable to. Value 0 means that no slot is specified. WARNING This table is … |
| 1.3.6.1.4.1.637.61.1.56.3 | TablehostSfpStatusTable | not-accessible | mandatory | This table contains the host shelf SFP or XFP status information. WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead. ALCATEL NO… |
| 1.3.6.1.4.1.637.61.1.56.3.1 | RowhostSfpStatusEntry | not-accessible | mandatory | Each entry consists of a list of SFP or XFP status parameters. WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead. |
| 1.3.6.1.4.1.637.61.1.56.3.1.1 | ColumnhostStatusSfpFaceplateNumber | read-only | mandatory | This is the host shelf SFP or XFP cage number. For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1). For an XFP cage, it is 256 + (the faceplat… |
| 1.3.6.1.4.1.637.61.1.56.3.1.2 | ColumnlanxPortNumber | read-only | mandatory | This is the Physical LANX or IHUB port to which the SFP or XFP is connected to. For an SHUB system, the lanxPortNumber here corresponds to lanxInterfaceIndex i… |
| 1.3.6.1.4.1.637.61.1.56.3.1.3 | ColumnhostSfpDownlinkStatus | read-only | mandatory | This is the host shelf SFP or XFP status. ok (1): The SFP or XFP is operational. sfpNotPresent (2): The SFP or XFP cage is empty. los (3): The SFP or XFP has d… |
| 1.3.6.1.4.1.637.61.1.56.3.1.4 | ColumnhostSfpCabledToRack | read-only | mandatory | This is the Rack ID of the expansion shelf LSM to which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNI… |
| 1.3.6.1.4.1.637.61.1.56.3.1.5 | ColumnhostSfpCabledToShelf | read-only | mandatory | This is the Shelf ID of the expansion shelf LSM which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING… |
| 1.3.6.1.4.1.637.61.1.56.3.1.6 | ColumnhostSfpCabledToSlot | read-only | mandatory | This is the Slot ID of the expansion shelf LSM which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. WARNING … |
| 1.3.6.1.4.1.637.61.1.56.3.1.7 | ColumnhostSfpType | read-only | mandatory | This variable indicates the type of the SFP or XFP, as read from the device. It is a bitmap represented as a sum, therefore, it can represent multiple types (c… |
| 1.3.6.1.4.1.637.61.1.56.3.1.8 | ColumnhostSfpCablingMismatch | read-only | mandatory | This is the host shelf SFP cabling mismatch status: noMismatch(1): no cabling mismatch is detected. unexpectedRemoteLt(2): a remote LT is detected at an unassi… |
| 1.3.6.1.4.1.637.61.1.56.3.1.9 | ColumnhostSfpCabledToPhysAddress | read-only | mandatory | The physical (MAC) address of the remote interface that is cabled to this host shelf SFP. If the remote interface does not have such an address or the address … |
| 1.3.6.1.4.1.637.61.1.56.4 | TableexpSfpStatusTable | not-accessible | mandatory | This table contains the expansion shelf SFP status information. ALCATEL NOTE: TABLESIZE: 312 (24 + 288) |
| 1.3.6.1.4.1.637.61.1.56.4.1 | RowexpSfpStatusEntry | not-accessible | mandatory | Each entry consists of the expansion shelf SFP status. |
| 1.3.6.1.4.1.637.61.1.56.4.1.1 | ColumnexpSfpRack | read-only | mandatory | This is the Rack ID of the expansion shelf SFP (actually its corresponding LSM). ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 1..7 DEFVAL… |
| 1.3.6.1.4.1.637.61.1.56.4.1.2 | ColumnexpSfpShelf | read-only | mandatory | This is the Shelf ID of the expansion shelf SFP (actually its corresponding LSM). ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: 1..4 DEFVA… |
| 1.3.6.1.4.1.637.61.1.56.4.1.3 | ColumnexpSfpSlot | read-only | mandatory | This is the Slot ID of the expansion shelf SFP (actually its corresponding LSM). ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: DEP / depen… |
| 1.3.6.1.4.1.637.61.1.56.4.1.4 | ColumnexpSfpStatus | read-only | mandatory | This is the status of the expansion shelf SFP: ok (1): the expansion shelf SFP is operational. sfpNotPresent (2): no SFP present. los (3): LOS is detected by t… |
| 1.3.6.1.4.1.637.61.1.56.4.1.5 | ColumnhostSfpFaceplateNumber | read-only | mandatory | This is the faceplate number of the host shelf SFP which the expansion shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any host shelf SFP, t… |
| 1.3.6.1.4.1.637.61.1.56.4.1.6 | ColumnexpSfpType | read-only | mandatory | This variable indicates the type of the SFP. It is a bitmap represented as a sum, therefore, it can represent multiple types (combination of types) simultaneou… |
| 1.3.6.1.4.1.637.61.1.56.4.1.7 | ColumnhostSfpLogSlotId | read-only | mandatory | This is the LogSlotId of the host LT which the expansion shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any host shelf SFP, the value of th… |
| 1.3.6.1.4.1.637.61.1.56.5 | TablesfpDiagTable | not-accessible | mandatory | The primary purpose of this read-only table: allow the SNMP manager to read real-time diagnostic measurements (e.g. the SFP's received optical power level) fro… |
| 1.3.6.1.4.1.637.61.1.56.5.1 | RowsfpDiagEntry | not-accessible | mandatory | The index for the sfpDiagTable identifies an SFP cage using two fields: the logicalSlotId of the card associated with the SFP cage (normally the card with the … |
| 1.3.6.1.4.1.637.61.1.56.5.1.1 | ColumnsfpDiagLogicalSlot | read-only | mandatory | This is the first index of the sfpDiagTable. Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has the SFP… |
| 1.3.6.1.4.1.637.61.1.56.5.1.2 | ColumnsfpDiagSfpFaceplateNumber | read-only | mandatory | This is the second index of the sfpDiagTable. It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, sfpDiagSf… |
| 1.3.6.1.4.1.637.61.1.56.5.1.3 | ColumnsfpDiagAvailable | read-only | mandatory | A column in the sfpDiagTable, with the following code points. noError - valid values for all objects in this row (e.g. sfpDiagRxPower) were obtained from the S… |
| 1.3.6.1.4.1.637.61.1.56.5.1.4 | ColumnsfpDiagLOS | read-only | mandatory | A column in the sfpDiagTable, with the following code points. los - the SFP in the specified SFP cage has detected Loss of Signal (on its receiver). noLos - th… |
| 1.3.6.1.4.1.637.61.1.56.5.1.5 | ColumnsfpDiagTxFault | read-only | mandatory | A column in the sfpDiagTable, with the following code points. txFault - the SFP in the specified SFP cage has detected a TxFault error (as defined in SFF-8472)… |
| 1.3.6.1.4.1.637.61.1.56.5.1.6 | ColumnsfpDiagTxPower | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured transmit power of the specified SFP, encoded into a string. Five types of values are supported. I… |
| 1.3.6.1.4.1.637.61.1.56.5.1.7 | ColumnsfpDiagRxPower | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured received power of the specified SFP, encoded into a string. Five types of values are supported. I… |
| 1.3.6.1.4.1.637.61.1.56.5.1.8 | ColumnsfpDiagTxBiasCurrent | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured transmit bias current of the specified SFP, encoded into a string. Four types of values are suppo… |
| 1.3.6.1.4.1.637.61.1.56.5.1.9 | ColumnsfpDiagSupplyVoltage | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured supply voltage of the specified SFP, encoded into a string. Three types of values are supported. … |
| 1.3.6.1.4.1.637.61.1.56.5.1.10 | ColumnsfpDiagTemperature | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured temperature of the specified SFP, encoded into a string. Two types of values are supported. In th… |
| 1.3.6.1.4.1.637.61.1.56.5.1.11 | ColumnsfpDiagTCAStatusTemperature | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured temperature alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATEL N… |
| 1.3.6.1.4.1.637.61.1.56.5.1.12 | ColumnsfpDiagTCAStatusVoltage | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured voltage alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. For XFP, this… |
| 1.3.6.1.4.1.637.61.1.56.5.1.13 | ColumnsfpDiagTCAStatusBiasCurrent | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured bias current alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATEL … |
| 1.3.6.1.4.1.637.61.1.56.5.1.14 | ColumnsfpDiagTCAStatusTxPower | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured received power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATE… |
| 1.3.6.1.4.1.637.61.1.56.5.1.15 | ColumnsfpDiagTCAStatusRxPower | read-only | mandatory | A column in the sfpDiagTable, containing the freshly-measured transmit power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4. ALCATE… |
| 1.3.6.1.4.1.637.61.1.56.5.1.16 | ColumnsfpDiagRSSIProfileId | read-write | mandatory | Indicates the RSSI TCA profile, refer to SfpRSSIProfileTable. 65535 means auto mode. When configured 65535, when sfp is plugged in, system will detect sfp type… |
| 1.3.6.1.4.1.637.61.1.56.5.1.17 | ColumnsfpDiagRSSIState | read-write | mandatory | Enable(1) and Disable(2) to RSSI function on port level. ALCATEL NOTE: ACCESS: NA usage: OPT persistent: YES INSRVMOD:YES RANGE:1,2 DEFVALUE: 2 UNITS: NA SPARS… |
| 1.3.6.1.4.1.637.61.1.56.5.1.18 | ColumnsfpDiagRSSIRxPowerAlmLow | read-only | mandatory | this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value,then alarm OLTRXPWLO will be reported. For CFP4, there is no modul… |
| 1.3.6.1.4.1.637.61.1.56.5.1.19 | ColumnsfpDiagRSSIRxPowerAlmHigh | read-only | mandatory | this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported. For CFP4, there is no module … |
| 1.3.6.1.4.1.637.61.1.56.5.1.20 | ColumnsfpDiagRSSIRxPowerWarnLow | read-only | mandatory | this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported. For CFP4, there is no module… |
| 1.3.6.1.4.1.637.61.1.56.5.1.21 | ColumnsfpDiagRSSIRxPowerWarnHigh | read-only | mandatory | this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported. For CFP4, there is no modu… |
| 1.3.6.1.4.1.637.61.1.56.5.1.22 | ColumnsfpDiagRSSITxPowerAlmLow | read-only | mandatory | this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,alarm OLTTXPWLO will be reported. For CFP4, there is no module level '… |
| 1.3.6.1.4.1.637.61.1.56.5.1.23 | ColumnsfpDiagRSSITxPowerAlmHigh | read-only | mandatory | this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,alarm OLTTXPWHI will be reported. For CFP4, there is no module level… |
| 1.3.6.1.4.1.637.61.1.56.5.1.24 | ColumnsfpDiagRSSITxPowerWarnLow | read-only | mandatory | this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,alarm OLTTXPWLOWARN will be reported. For CFP4, there is no module… |
| 1.3.6.1.4.1.637.61.1.56.5.1.25 | ColumnsfpDiagRSSITxPowerWarnHigh | read-only | mandatory | this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,alarm OLTTXPWHIWARN will be reported. For CFP4, there is no modu… |
| 1.3.6.1.4.1.637.61.1.56.5.1.26 | ColumnsfpDiagRSSITemperatureAlmLow | read-only | mandatory | this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then alarm OLTTEMPLO will be reported. For CFP4,this is the module… |
| 1.3.6.1.4.1.637.61.1.56.5.1.27 | ColumnsfpDiagRSSITemperatureAlmHigh | read-only | mandatory | this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,alarm OLTTEMPHI will be reported. For CFP4,this is the module lev… |
| 1.3.6.1.4.1.637.61.1.56.5.1.28 | ColumnsfpDiagRSSITemperatureWarnLow | read-only | mandatory | this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then alarm OLTTEMPLOWARN will be reported. For CFP4,this is th… |
| 1.3.6.1.4.1.637.61.1.56.5.1.29 | ColumnsfpDiagRSSITemperatureWarnHigh | read-only | mandatory | this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,alarm OLTTEMPHIWARN will be reported. For CFP4,this is the mo… |
| 1.3.6.1.4.1.637.61.1.56.5.1.30 | ColumnsfpDiagRSSIBiasAlmLow | read-only | mandatory | this object indicates the threshold for OLTBIASLO. when bias is less than this value, then alarm OLTBIASLO will be reported. For CFP4,this is the module level … |
| 1.3.6.1.4.1.637.61.1.56.5.1.31 | ColumnsfpDiagRSSIBiasAlmHigh | read-only | mandatory | this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then alarm OLTBIASHI will be reported. For CFP4,this is the module leve… |
| 1.3.6.1.4.1.637.61.1.56.5.1.32 | ColumnsfpDiagRSSIBiasWarnLow | read-only | mandatory | this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then alarm OLTBIASLOWARN will be reported. For CFP4,this is the modul… |
| 1.3.6.1.4.1.637.61.1.56.5.1.33 | ColumnsfpDiagRSSIBiasWarnHigh | read-only | mandatory | this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then alarm OLTBIASHIWARN will be reported. For CFP4,this is the mod… |
| 1.3.6.1.4.1.637.61.1.56.5.1.34 | ColumnsfpDiagRSSIVoltageAlmLow | read-only | mandatory | this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then alarm OLTVOLLO will be reported. 'Not Available' is shown when the… |
| 1.3.6.1.4.1.637.61.1.56.5.1.35 | ColumnsfpDiagRSSIVoltageAlmHigh | read-only | mandatory | this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then alarm OLTVOLHI will be reported. 'Not Available' is shown when t… |
| 1.3.6.1.4.1.637.61.1.56.5.1.36 | ColumnsfpDiagRSSIVoltageWarnLow | read-only | mandatory | this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then alarm OLTVOLLOWARN will be reported. 'Not Available' is shown … |
| 1.3.6.1.4.1.637.61.1.56.5.1.37 | ColumnsfpDiagRSSIVoltageWarnHigh | read-only | mandatory | this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then alarm OLTVOLHIWARN will be reported. 'Not Available' is show… |
| 1.3.6.1.4.1.637.61.1.56.5.1.38 | ColumnsfpDiagRSSIExtRxPowerAlmLow | read-only | mandatory | this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then alarm OLTRXPWLO will be reported. Applicable only for 10G EP… |
| 1.3.6.1.4.1.637.61.1.56.5.1.39 | ColumnsfpDiagRSSIExtRxPowerAlmHigh | read-only | mandatory | this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported. Applicable only for 10G EPON … |
| 1.3.6.1.4.1.637.61.1.56.5.1.40 | ColumnsfpDiagRSSIExtRxPowerWarnLow | read-only | mandatory | this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported. Applicable only for 10G EPON… |
| 1.3.6.1.4.1.637.61.1.56.5.1.41 | ColumnsfpDiagRSSIExtRxPowerWarnHigh | read-only | mandatory | this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported. Applicable only for 10G EP… |
| 1.3.6.1.4.1.637.61.1.56.5.1.42 | ColumnsfpDiagRSSIExtTxPowerAlmLow | read-only | mandatory | this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,alarm EXTOLTTXPWLO will be reported. Applicable only for 10G EPON S… |
| 1.3.6.1.4.1.637.61.1.56.5.1.43 | ColumnsfpDiagRSSIExtTxPowerAlmHigh | read-only | mandatory | this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,alarm EXTOLTTXPWHI will be reported. Applicable only for 10G EPON… |
| 1.3.6.1.4.1.637.61.1.56.5.1.44 | ColumnsfpDiagRSSIExtTxPowerWarnLow | read-only | mandatory | this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,alarm EXTOLTTXPWLOWARN will be reported. Applicable only for 10… |
| 1.3.6.1.4.1.637.61.1.56.5.1.45 | ColumnsfpDiagRSSIExtTxPowerWarnHigh | read-only | mandatory | this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,alarm EXTOLTTXPWHIWARN will be reported. Applicable only for … |
| 1.3.6.1.4.1.637.61.1.56.5.1.46 | ColumnsfpDiagRSSIExtBiasAlmLow | read-only | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then alarm EXTOLTBIASLO will be reported. For CFP4, … |
| 1.3.6.1.4.1.637.61.1.56.5.1.47 | ColumnsfpDiagRSSIExtBiasAlmHigh | read-only | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then alarm EXTOLTBIASHI will be reported. For CFP4… |
| 1.3.6.1.4.1.637.61.1.56.5.1.48 | ColumnsfpDiagRSSIExtBiasWarnLow | read-only | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value,then alarm EXTOLTBIASLOWARN will be reported. For… |
| 1.3.6.1.4.1.637.61.1.56.5.1.49 | ColumnsfpDiagRSSIExtBiasWarnHigh | read-only | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value,then alarm EXTOLTBIASHIWARN will be reported. F… |
| 1.3.6.1.4.1.637.61.1.56.5.1.50 | ColumnsfpDiagRSSIExtTemperatureAlmLow | read-only | mandatory | This object indicates the laser temperature low alarm threshold of network lane for CFP4. When any network lane's laser temperature of CFP4 is less than this v… |
| 1.3.6.1.4.1.637.61.1.56.5.1.51 | ColumnsfpDiagRSSIExtTemperatureAlmHigh | read-only | mandatory | This object indicates the laser temperature high alarm threshold of network lanefor CFP4. When any network lane's laser temperature of CFP4 is larger than this… |
| 1.3.6.1.4.1.637.61.1.56.5.1.52 | ColumnsfpDiagRSSIExtTemperatureWarnLow | read-only | mandatory | This object indicates the laser temperature low warning threshold of network lane for CFP4. When any network lane's laser temperature of CFP4 is less than this… |
| 1.3.6.1.4.1.637.61.1.56.5.1.53 | ColumnsfpDiagRSSIExtTemperatureWarnHigh | read-only | mandatory | This object indicates the laser temperature high warning threshold of network lane for CFP4. When any network lane's laser temperature of CFP4 is larger than t… |
| 1.3.6.1.4.1.637.61.1.56.6 | TablesfpInventoryTable | not-accessible | mandatory | The primary purpose of this read-only table: allow the SNMP manager to read read-only EEPROM contents from EEPROM of SFP Details are documented with the indivi… |
| 1.3.6.1.4.1.637.61.1.56.6.1 | RowsfpInventoryEntry | not-accessible | mandatory | The index for the sfpInventoryTable identifies an SFP cage using two fields: the logicalSlotId of the card associated with the SFP cage (normally the card with… |
| 1.3.6.1.4.1.637.61.1.56.6.1.1 | ColumnsfpInvLogicalSlot | read-only | mandatory | This is the first index of the sfpInventoryTable. Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has th… |
| 1.3.6.1.4.1.637.61.1.56.6.1.2 | ColumnsfpInvFaceplateNumber | read-only | mandatory | This is the second index of the sfpInventoryTable. It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, sfpI… |
| 1.3.6.1.4.1.637.61.1.56.6.1.3 | ColumnsfpInvAvailable | read-only | mandatory | A column in the sfpInventoryTable, with the following code points. noError - valid values for all objects in this row (e.g. sfpDiagRxPower) were obtained from … |
| 1.3.6.1.4.1.637.61.1.56.6.1.4 | ColumnsfpInvFiberType | read-only | mandatory | A column in the sfpInventoryTable, containing the fiber type of the specified SFP/SFP+. For XFP, it is always singleMode ALCATEL NOTE: ACCESS: RO USAGE: NA PER… |
| 1.3.6.1.4.1.637.61.1.56.6.1.5 | ColumnsfpInvAluPartNumber | read-only | mandatory | A column in the sfpInventoryTable, containing the Alcatel-Lucent part number of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USA… |
| 1.3.6.1.4.1.637.61.1.56.6.1.6 | ColumnsfpInvCLEIcode | read-only | mandatory | A column in the sfpInventoryTable, containing the CLEI code of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: N… |
| 1.3.6.1.4.1.637.61.1.56.6.1.7 | ColumnsfpInvTxWavelength | read-only | mandatory | A column in the sfpInventoryTable, containing the transmit wavelength of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA … |
| 1.3.6.1.4.1.637.61.1.56.6.1.8 | ColumnsfpInvAdditionalInfo | read-only | mandatory | A column in the sfpInventoryTable, containing the customer specific additional information of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: … |
| 1.3.6.1.4.1.637.61.1.56.6.1.9 | ColumnsfpInvMfgName | read-only | mandatory | A column in the sfpInventoryTable, containing the manufacturer or vendor name of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO US… |
| 1.3.6.1.4.1.637.61.1.56.6.1.10 | ColumnsfpInvMfgOUICode | read-only | mandatory | A column in the sfpInventoryTable, containing the manufacturer or vendor OUI code of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: R… |
| 1.3.6.1.4.1.637.61.1.56.6.1.11 | ColumnsfpInvMfgSerialNumber | read-only | mandatory | A column in the sfpInventoryTable, containing the manufacturer or vendor serial number of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCE… |
| 1.3.6.1.4.1.637.61.1.56.6.1.12 | ColumnsfpInvMfgDate | read-only | mandatory | A column in the sfpInventoryTable, containing the manufactured date of the specified SFP/SFP+/XFP, encoded into a string. ALCATEL NOTE: ACCESS: RO USAGE: NA PE… |
| 1.3.6.1.4.1.637.61.1.56.6.1.13 | ColumnsfpInvSpecificalType | read-only | mandatory | indicate basic type of the specified SFP(+)/XFP/QSFP(+). ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: N… |
| 1.3.6.1.4.1.637.61.1.56.7 | TablesfpRSSIProfileTable | not-accessible | mandatory | This object contains a table for defining RSSI for SFP/XFP/CFP4 by operator, which could be used for all NT/NTIO cards and DSL/GPON/EPON line cards. ALCATEL NO… |
| 1.3.6.1.4.1.637.61.1.56.7.1 | RowsfpRSSIProfileEntry | not-accessible | mandatory | An entry in the sfpRSSIProfileTable. Row creation : an entry is created when operator creates SfpRSSI profile. Row deletion : an entry is created when operator… |
| 1.3.6.1.4.1.637.61.1.56.7.1.1 | ColumnsfpRSSIProfileIndex | not-accessible | mandatory | This object is the index to the sfpSfpRSSIProfileTable. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INSRVMOD: NO RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NA |
| 1.3.6.1.4.1.637.61.1.56.7.1.2 | ColumnsfpRSSIProfileName | read-write | mandatory | The corresponding name for a given profile id. The name corresponding to the ProfileId must also be unique. ALCATEL NOTE: ACCESS: NA USAGE: NA PERSIST: YES INS… |
| 1.3.6.1.4.1.637.61.1.56.7.1.3 | ColumnsfpRSSIProfileRefCount | read-only | mandatory | Indicates the number of entities using this profile. If the reference count is greater than 0, then this profile is 'in use', and may NOT be deleted. If the va… |
| 1.3.6.1.4.1.637.61.1.56.7.1.4 | ColumnsfpRSSIRowStatus | read-write | mandatory | This object is used to create a new row or delete an row. ALCATEL NOTE: ACCESS: NA usage: MAND persistent: YES INSRVMOD:YES RANGE:1,4,6 DEFVALUE: NA UNITS: NA … |
| 1.3.6.1.4.1.637.61.1.56.7.1.5 | ColumnsfpRSSIRxPowerAlmLow | read-write | mandatory | this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then alarm OLTRXPWLO will be reported. For CFP4, there is no modu… |
| 1.3.6.1.4.1.637.61.1.56.7.1.6 | ColumnsfpRSSIRxPowerAlmHigh | read-write | mandatory | this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value, then alarm OLTRXPWHI will be reported. For CFP4, there is no module… |
| 1.3.6.1.4.1.637.61.1.56.7.1.7 | ColumnsfpRSSIRxPowerWarnLow | read-write | mandatory | this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value, alarm OLTRXPWLOWARN will be reported. For CFP4, there is no modul… |
| 1.3.6.1.4.1.637.61.1.56.7.1.8 | ColumnsfpRSSIRxPowerWarnHigh | read-write | mandatory | this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value, alarm OLTRXPWHIWARN will be reported. For CFP4, there is no mod… |
| 1.3.6.1.4.1.637.61.1.56.7.1.9 | ColumnsfpRSSITxPowerAlmLow | read-write | mandatory | this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value, alarm OLTTXPWLO will be reported. For CFP4, there is no module level … |
| 1.3.6.1.4.1.637.61.1.56.7.1.10 | ColumnsfpRSSITxPowerAlmHigh | read-write | mandatory | this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value, alarm OLTTXPWHI will be reported. For CFP4, there is no module leve… |
| 1.3.6.1.4.1.637.61.1.56.7.1.11 | ColumnsfpRSSITxPowerWarnLow | read-write | mandatory | this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value, alarm OLTTXPWLOWARN will be reported. For CFP4, there is no modul… |
| 1.3.6.1.4.1.637.61.1.56.7.1.12 | ColumnsfpRSSITxPowerWarnHigh | read-write | mandatory | this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value, alarm OLTTXPWHIWARN will be reported. For CFP4, there is no mod… |
| 1.3.6.1.4.1.637.61.1.56.7.1.13 | ColumnsfpRSSITemperatureAlmLow | read-write | mandatory | this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then alarm OLTTEMPLO will be reported. For CFP4, this is the modul… |
| 1.3.6.1.4.1.637.61.1.56.7.1.14 | ColumnsfpRSSITemperatureAlmHigh | read-write | mandatory | this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value, alarm OLTTEMPHI will be reported. For CFP4, this is the module l… |
| 1.3.6.1.4.1.637.61.1.56.7.1.15 | ColumnsfpRSSITemperatureWarnLow | read-write | mandatory | this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then alarm OLTTEMPLOWARN will be reported. For CFP4, this is t… |
| 1.3.6.1.4.1.637.61.1.56.7.1.16 | ColumnsfpRSSITemperatureWarnHigh | read-write | mandatory | this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value, alarm OLTTEMPHIWARN will be reported. For CFP4, this is the … |
| 1.3.6.1.4.1.637.61.1.56.7.1.17 | ColumnsfpRSSIBiasAlmLow | read-write | mandatory | this object indicates the threshold for OLTBIASLO. when bias is less than this value, then alarm OLTBIASLO will be reported. For CFP4, this is the module level… |
| 1.3.6.1.4.1.637.61.1.56.7.1.18 | ColumnsfpRSSIBiasAlmHigh | read-write | mandatory | this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then alarm OLTBIASHI will be reported. For CFP4, this is the module lev… |
| 1.3.6.1.4.1.637.61.1.56.7.1.19 | ColumnsfpRSSIBiasWarnLow | read-write | mandatory | this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then alarm OLTBIASLOWARN will be reported. For CFP4, this is the modu… |
| 1.3.6.1.4.1.637.61.1.56.7.1.20 | ColumnsfpRSSIBiasWarnHigh | read-write | mandatory | this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then alarm OLTBIASHIWARN will be reported. For CFP4, this is the mo… |
| 1.3.6.1.4.1.637.61.1.56.7.1.21 | ColumnsfpRSSIVoltageAlmLow | read-write | mandatory | this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then alarm OLTVOLLO will be reported. ALCATEL NOTE: ACCESS: NA USAGE: N… |
| 1.3.6.1.4.1.637.61.1.56.7.1.22 | ColumnsfpRSSIVoltageAlmHigh | read-write | mandatory | this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then alarm OLTVOLHI will be reported. ALCATEL NOTE: ACCESS: NA USAGE:… |
| 1.3.6.1.4.1.637.61.1.56.7.1.23 | ColumnsfpRSSIVoltageWarnLow | read-write | mandatory | this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then alarm OLTVOLLOWARN will be reported. ALCATEL NOTE: ACCESS: NA … |
| 1.3.6.1.4.1.637.61.1.56.7.1.24 | ColumnsfpRSSIVoltageWarnHigh | read-write | mandatory | this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then alarm OLTVOLHIWARN will be reported. ALCATEL NOTE: ACCESS: N… |
| 1.3.6.1.4.1.637.61.1.56.7.1.25 | ColumnsfpRSSIExtRxPowerAlmLow | read-write | mandatory | this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then alarm OLTRXPWLO will be reported. ALCATEL NOTE: ACCESS: NA U… |
| 1.3.6.1.4.1.637.61.1.56.7.1.26 | ColumnsfpRSSIExtRxPowerAlmHigh | read-write | mandatory | this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value, then alarm OLTRXPWHI will be reported. ALCATEL NOTE: ACCESS: NA USA… |
| 1.3.6.1.4.1.637.61.1.56.7.1.27 | ColumnsfpRSSIExtRxPowerWarnLow | read-write | mandatory | this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value, alarm OLTRXPWLOWARN will be reported. ALCATEL NOTE: ACCESS: NA US… |
| 1.3.6.1.4.1.637.61.1.56.7.1.28 | ColumnsfpRSSIExtRxPowerWarnHigh | read-write | mandatory | this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value, alarm OLTRXPWHIWARN will be reported. ALCATEL NOTE: ACCESS: NA … |
| 1.3.6.1.4.1.637.61.1.56.7.1.29 | ColumnsfpRSSIExtTxPowerAlmLow | read-write | mandatory | this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value, alarm EXTOLTTXPWLO will be reported. ALCATEL NOTE: ACCESS: NA USAG… |
| 1.3.6.1.4.1.637.61.1.56.7.1.30 | ColumnsfpRSSIExtTxPowerAlmHigh | read-write | mandatory | this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value, alarm EXTOLTTXPWHI will be reported. ALCATEL NOTE: ACCESS: NA US… |
| 1.3.6.1.4.1.637.61.1.56.7.1.31 | ColumnsfpRSSIExtTxPowerWarnLow | read-write | mandatory | this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value, alarm EXTOLTTXPWLOWARN will be reported. ALCATEL NOTE: ACCESS:… |
| 1.3.6.1.4.1.637.61.1.56.7.1.32 | ColumnsfpRSSIExtTxPowerWarnHigh | read-write | mandatory | this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value, alarm EXTOLTTXPWHIWARN will be reported. ALCATEL NOTE: ACCES… |
| 1.3.6.1.4.1.637.61.1.56.7.1.33 | ColumnsfpRSSIExtBiasAlmLow | read-write | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then alarm EXTOLTBIASLO will be reported. For CFP4,t… |
| 1.3.6.1.4.1.637.61.1.56.7.1.34 | ColumnsfpRSSIExtBiasAlmHigh | read-write | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then alarm EXTOLTBIASHI will be reported. For CFP4… |
| 1.3.6.1.4.1.637.61.1.56.7.1.35 | ColumnsfpRSSIExtBiasWarnLow | read-write | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value, then alarm EXTOLTBIASLOWARN will be reported. Fo… |
| 1.3.6.1.4.1.637.61.1.56.7.1.36 | ColumnsfpRSSIExtBiasWarnHigh | read-write | mandatory | For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value, then alarm EXTOLTBIASHIWARN will be reported. … |
| 1.3.6.1.4.1.637.61.1.56.7.1.37 | ColumnsfpRssiProfileType | read-write | mandatory | RSSI profile type |
| 1.3.6.1.4.1.637.61.1.56.7.1.38 | ColumnsfpRSSIExtTemperatureAlmLow | read-write | mandatory | This object indicates the laser temperature low alarm threshold of network lane for CFP4. When any network lane's laser temperature of CFP4 is less than this v… |
| 1.3.6.1.4.1.637.61.1.56.7.1.39 | ColumnsfpRSSIExtTemperatureAlmHigh | read-write | mandatory | This object indicates the laser temperature high alarm threshold of network lane for CFP4. When any network lane's laser temperature of CFP4 is large than this… |
| 1.3.6.1.4.1.637.61.1.56.7.1.40 | ColumnsfpRSSIExtTemperatureWarnLow | read-write | mandatory | This object indicates the laser temperature low warning threshold of network lane for CFP4. When any network lane's laser temperature of CFP4 is less than this… |
| 1.3.6.1.4.1.637.61.1.56.7.1.41 | ColumnsfpRSSIExtTemperatureWarnHigh | read-write | mandatory | This object indicates the laser temperature high warning threshold of network lane for CFP4. When any network lane's laser temperature of CFP4 is large than th… |
| 1.3.6.1.4.1.637.61.1.56.8 | ScalarsfpRSSIProfileIndexNext | read-only | mandatory | This object contains an appropriate value to be used for sfpRSSIProfileIndex when creating entries in the sfpRSSIProfileTable. The value 0 indicates that no un… |
| 1.3.6.1.4.1.637.61.1.56.9 | ScalarsfpRSSIProfileMaxIndex | read-only | mandatory | This object represents the maximum number of sfpRSSIProfiles that can be created. The object sfpRSSIProfileMaxIndex will have values ranging from 0 to the valu… |
| 1.3.6.1.4.1.637.61.1.56.10 | Tabledsx1ClockConfigTable | not-accessible | mandatory | This table contains the 2E1/DS1 SFP Clock configuration information. ALCATEL NOTE: TABLESIZE: 10 |
| 1.3.6.1.4.1.637.61.1.56.10.1 | Rowdsx1ClockConfigEntry | not-accessible | mandatory | Each entry consists of a list of 2E1/DS1 SFP general configuration parameters. |
| 1.3.6.1.4.1.637.61.1.56.10.1.1 | Columndsx1SfpClkConfigLogicalSlot | read-only | mandatory | This is the first index of the dsx1ClockConfig Table. Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which ha… |
| 1.3.6.1.4.1.637.61.1.56.10.1.2 | Columndsx1SfpClkConfigFaceplateNumber | read-only | mandatory | This is the second index of the dsx1ClockConfigTable. It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, s… |
| 1.3.6.1.4.1.637.61.1.56.10.1.3 | Columndsx1SfpClkConfigSyncSource | read-write | mandatory | Select as sync source between clock recovered from Serdes or Tributary clock. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1..3 DEFVALUE… |
| 1.3.6.1.4.1.637.61.1.56.10.1.4 | Columndsx1SfpClkConfigDegradeAlarm | read-write | mandatory | Enable degrade alarm on los pin. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1 DEFVALUE: 1 UNITS: NA SPARSE: NO DESCR: Only Default val… |
| 1.3.6.1.4.1.637.61.1.56.10.1.5 | Columndsx1SfpClkConfigSoftwareReset | read-write | mandatory | noSoftwareReset (default value), this is the value that is returned when read the attribute. softwareReset, this is the value that can be set by the manager. T… |
| 1.3.6.1.4.1.637.61.1.56.10.1.6 | Columndsx1SfpClkAlarmState | read-only | mandatory | serdesFailAlarm (1):Failure of the SERDES clock alarm (active high) tributary1FailAlarm (2): Failure alarm: the tributary 1 clock is not present (active high) … |
| 1.3.6.1.4.1.637.61.1.56.10.1.7 | Columndsx1SfpClkConfigClkControlSignal | read-write | mandatory | SEL_LOC_OR_SRC. Control signal to select the VTCXO control signal (PWM) between DPLL output and a ~4MHZ square wave signal generated dividing the same system c… |
| 1.3.6.1.4.1.637.61.1.56.10.1.8 | Columndsx1SfpClkConfigClkSource | read-write | mandatory | CLK_SOURCE_SEL. This bit is used to select between local VTCXO and CLOCK FROM SERDES as synchronization source for the signals: CK_EN-25M and CK-EN-ETSI-ANSI 1… |
| 1.3.6.1.4.1.637.61.1.56.10.1.9 | Columndsx1SfpClkRowStatus | read-write | mandatory | This object is used to create a new row or delete an existing row in this table. The possible valid values are: (1) active (4) createdAndGo (6) destroy To crea… |
| 1.3.6.1.4.1.637.61.1.56.10.1.10 | Columndsx1SfpClkConfState | read-only | mandatory | Clock Configuration state bitmap. bit 0: high value indicates SyncSource Configuration fail bit 1: high value indicates DegradeAlarm Configuration fail bit 2: … |
| 1.3.6.1.4.1.637.61.1.56.11 | Tabledsx1GeneralConfigTable | not-accessible | mandatory | This table contains the 2E1/DS1 SFP General configuration information. ALCATEL NOTE: TABLESIZE: 11 |
| 1.3.6.1.4.1.637.61.1.56.11.1 | Rowdsx1GeneralConfigEntry | not-accessible | mandatory | Each entry consists of a list of 2E1/DS1 SFP general configuration parameters. A row entry is created or deleted in this table when the corresponding operation… |
| 1.3.6.1.4.1.637.61.1.56.11.1.1 | Columndsx1SfpReadyStatus | read-only | mandatory | This is the host SFP status. ready (0): notready (1): ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: No INSRVMOD: NA RANGE: 0,1 DEFVALUE: NA UNITS: NA SPARSE: NO … |
| 1.3.6.1.4.1.637.61.1.56.11.1.2 | Columndsx1SfpGenConfigMarket | read-write | mandatory | ETSI (0): used for ETSI Market for E1 Lines. ANSI (1): used for ANSI Market for T1/DS1 Lines. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANG… |
| 1.3.6.1.4.1.637.61.1.56.11.1.3 | Columndsx1SfpGenConfigTributary1 | read-write | mandatory | Enable/Disable Tributary1. disable (0): disable Tributary 1. enable (1): enable Tributary 1. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE… |
| 1.3.6.1.4.1.637.61.1.56.11.1.4 | Columndsx1SfpGenConfigTributary2 | read-write | mandatory | Enable/Disable Tributary2. disable (0): Disable Tributary 2. enable (1): enable Tributary 0. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE… |
| 1.3.6.1.4.1.637.61.1.56.11.1.5 | Columndsx1SfpGenConfigSERDES | read-write | mandatory | disable (0): Disable SERDES device. enable (1): enable SERDES device. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1 DEFVALUE: 1 UNITS: … |
| 1.3.6.1.4.1.637.61.1.56.11.1.6 | Columndsx1SfpGenConfigSERDESLoopBack | read-write | mandatory | Enable of SERDES device. When held low, the SERDES device enters in an ultralow-power idle state and the transmitter output pins are set to high impedance stat… |
| 1.3.6.1.4.1.637.61.1.56.11.1.7 | Columndsx1SfpGenConfigSGMIILocalLoopBack | read-write | mandatory | disable (0): SGMII local loopback disable towards CESoP. enable (1): SGMII local loopback enable towards CESoP. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES… |
| 1.3.6.1.4.1.637.61.1.56.11.1.8 | Columndsx1SfpGenConfigSGMIIRemoteLoopBack | read-write | mandatory | disable (0): SGMII remote loopback disable towards serdes. enable (1): SGMII remote loopback enable towards serdes. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST:… |
| 1.3.6.1.4.1.637.61.1.56.11.1.9 | Columndsx1SfpGenConfigLIUReset | read-write | mandatory | reset (0): A low level value (for more than 100ns) forces the LIU to reset state. This is the value that can be set by the manager. This value will trigger a L… |
| 1.3.6.1.4.1.637.61.1.56.11.1.10 | Columndsx1SfpGenConfigLIUHighImpedence | read-write | mandatory | low (0): high (1): A high level value places all transmitter drivers of the LIU in high Impedence state. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVM… |
| 1.3.6.1.4.1.637.61.1.56.11.1.11 | Columndsx1SfpGenConfigState | read-only | mandatory | General Configuration state bitmap. bit 0: high value indicates Market Configuration fail bit 1: high value indicates Tributory1 Configuration fail bit 2: high… |
| 1.3.6.1.4.1.637.61.1.56.12 | Tabledsx1PWTDMInterfaceTable | not-accessible | mandatory | This table contains the 2E1/DS1 SFP PW TDM interface configuration information. ALCATEL NOTE: TABLESIZE: 4 |
| 1.3.6.1.4.1.637.61.1.56.12.1 | Rowdsx1PWTDMInterfaceEntry | not-accessible | mandatory | Each entry consists of a list of 2E1/DS1 SFP TDM Interface parameters. A row entry is created or deleted in this table when the corresponding operation on a ro… |
| 1.3.6.1.4.1.637.61.1.56.12.1.1 | Columndsx1PWTDMInterfaceMarket | read-write | mandatory | etsi(0): used for ETSI Market for E1 Lines. ansi (1): used for ANSI Market for T1/DS1 Lines. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE… |
| 1.3.6.1.4.1.637.61.1.56.12.1.2 | Columndsx1PWTDMInterfaceWindowLength | read-write | mandatory | Window length measured in unit of 10 ms. Eg. wndow_len = 10 means window is 10*10 = 100ms long ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RAN… |
| 1.3.6.1.4.1.637.61.1.56.12.1.3 | Columndsx1PWTDMInterfaceWindowNumber | read-write | mandatory | Consecutively detected window number. Eg. wndow_num = 20 means if packets lost in consecutive 20 windows, then assert CESalarm (Circuit emulation service alarm… |
| 1.3.6.1.4.1.637.61.1.56.12.1.4 | Columndsx1PWTDMInterfaceConfState | read-only | mandatory | PWTDM Interface Configuration state bitmap. bit 0: high value indicates Market Configuration fail bit 1: high value indicates Window Length Configuration fail … |
| 1.3.6.1.4.1.637.61.1.56.13 | Tabledsx1PWTDMConfigTable | not-accessible | mandatory | This table contains the 2E1/DS1 SFP TDMoP pseudowire configuration information. ALCATEL NOTE: TABLESIZE: 19 |
| 1.3.6.1.4.1.637.61.1.56.13.1 | Rowdsx1PWTDMConfigEntry | not-accessible | mandatory | Each entry consists of a list of 2E1/DS1 SFP TDMoP parameters. |
| 1.3.6.1.4.1.637.61.1.56.13.1.1 | Columndsx1SfpPWTDMLogicalSlot | read-only | mandatory | This is the first index of the dsx1PWTDMConfig Table. Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which ha… |
| 1.3.6.1.4.1.637.61.1.56.13.1.2 | Columndsx1SfpPWTDMFaceplateNumber | read-only | mandatory | This is the second index of the dsx1PWTDMConfig Table. It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is zero, … |
| 1.3.6.1.4.1.637.61.1.56.13.1.3 | Columndsx1PWTDMTributaryIndex | read-only | mandatory | This is the third index of the dsx1PWTDMConfigTable. Normally, this object used to select the tributary selecton (1 or 2 or 3) of the 2xE1/DS1 FPGA where value… |
| 1.3.6.1.4.1.637.61.1.56.13.1.4 | Columndsx1PWTDMChannel | read-write | mandatory | Chan_ena 0: close this channel; 1: open this channel ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0,1 DEFVALUE: NA UNITS: NA SPARSE: NO … |
| 1.3.6.1.4.1.637.61.1.56.13.1.5 | Columndsx1PWTDMRtpMode | read-write | mandatory | Rtp_present 0: rtp is not present, configure to ACR mode; 1: rtp is present, configure DCR mode ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RA… |
| 1.3.6.1.4.1.637.61.1.56.13.1.6 | Columndsx1PWTDMPacketLength | read-write | mandatory | Config packet length bits (13:0) ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...16382 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
| 1.3.6.1.4.1.637.61.1.56.13.1.7 | Columndsx1PWTDMSourceAddressPointer | read-write | mandatory | SA select 2 bits field (TDM2Eth) 00 - Select Source Address 0 01 - Select Source Address 1 10 - Select Source Address 2 11 - Select Source Address 3 ALCATEL NO… |
| 1.3.6.1.4.1.637.61.1.56.13.1.8 | Columndsx1PWTDMSourceAddress | read-write | mandatory | MAC SA for each tributary ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
| 1.3.6.1.4.1.637.61.1.56.13.1.9 | Columndsx1PWTDMDestinationMac | read-write | mandatory | MAC DA for each tributary ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
| 1.3.6.1.4.1.637.61.1.56.13.1.10 | Columndsx1PWTDMPriority | read-write | mandatory | 802.1p 3 bits field. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...7 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
| 1.3.6.1.4.1.637.61.1.56.13.1.11 | Columndsx1PWTDMVlanId | read-write | mandatory | Vlan ID. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...4095 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
| 1.3.6.1.4.1.637.61.1.56.13.1.12 | Columndsx1PWTDMECIDEthToTDM | read-write | mandatory | ECID (Emulated Circuit Identifer) 20 bit field Eth2Tdm. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0..1048575 DEFVALUE: NA UNITS: NA S… |
| 1.3.6.1.4.1.637.61.1.56.13.1.13 | Columndsx1PWTDMECIDTDMToEth | read-write | mandatory | ECID (Emulated Circuit Identifer) 20 bit field Tdm2Eth. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0..1048575 DEFVALUE: NA UNITS: NA S… |
| 1.3.6.1.4.1.637.61.1.56.13.1.14 | Columndsx1PWTDJitterBufferSize | read-write | mandatory | Jitter Buffer Queue size. Actual size + configurable size + 1. Example configuring size of 7 mean buffer size of 8 packets ALCATEL NOTE: ACCESS: RW USAGE: NA P… |
| 1.3.6.1.4.1.637.61.1.56.13.1.15 | Columndsx1PWTDMConsequenceNumber | read-write | mandatory | New Sequence number ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 0...7 DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
| 1.3.6.1.4.1.637.61.1.56.13.1.16 | Columndsx1PWTDMClock | read-write | mandatory | TDM_clock_strategy. 00: differential mode; 01: loop back mode; 10:reference Node time mode; 11: adaptive mode. ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES … |
| 1.3.6.1.4.1.637.61.1.56.13.1.17 | Columndsx1PWTDMFPGAVersion | read-only | mandatory | FPGA software version. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA SPARSE: NO DESCR: NA |
| 1.3.6.1.4.1.637.61.1.56.13.1.18 | Columndsx1PWTDMRowStatus | read-write | mandatory | This object is used to create a new row or delete an existing row in this table. The possible valid values are: (1) active (4) createdAndGo (6) destroy To crea… |
| 1.3.6.1.4.1.637.61.1.56.13.1.19 | Columndsx1PWTDMConfState | read-only | mandatory | PWTDM Configuration state bitmap. bit 0: high value indicates Channel Configuration fail bit 1: high value indicates RTP modeSourceAddress PointerConfiguration… |
| 1.3.6.1.4.1.637.61.1.56.14 | Tabledsx1LineInterfaceUnitTable | not-accessible | mandatory | This table contains the 2E1/DS1 SFP Line Interface Unit configuration information. ALCATEL NOTE: TABLESIZE: 4 |
| 1.3.6.1.4.1.637.61.1.56.14.1 | Rowdsx1LineInterfaceUnitEntry | not-accessible | mandatory | Each entry consists of a list of 2E1/DS1 SFP Line Interface Unit parameters. A row entry is created or deleted in this table when the corresponding operation o… |
| 1.3.6.1.4.1.637.61.1.56.14.1.1 | Columndsx1SfpLIUConfLine | read-write | mandatory | This bit selects the E1 or T1/J1 operation mode globally. 0: E1 mode is selected. 1: T1/J1 mode is selected. Note: After bit T1/E1 is changed: Before accessing… |
| 1.3.6.1.4.1.637.61.1.56.14.1.2 | Columndsx1SfpLIURxSensitivity | read-write | mandatory | 0: Receive equalizer off (short haul receiver) 1: Receive equalizer on (long haul receiver) ALCATEL NOTE: ACCESS: RW USAGE: NA PERSIST: YES INSRVMOD: NA RANGE:… |
| 1.3.6.1.4.1.637.61.1.56.14.1.3 | Columndsx1SfpLIUTxConfig | read-write | mandatory | These bits select the transmit template/LBO for short-haul/long-haul applications. value T1/E1/J1 TCLK Cable Cable range/ Allowable Cable impedance LBO loss 00… |
| 1.3.6.1.4.1.637.61.1.56.14.1.4 | Columndsx1SfpLIUConfState | read-only | mandatory | Line Interface Unit Configuration state bitmap. bit 0: high value indicates ConfLine Configuration fail bit 1: high value indicates Receiver Sensitivity Config… |
| 1.3.6.1.4.1.637.61.1.56.15 | Tabledsx1FramerTable | not-accessible | mandatory | This table contains the 2E1/DS1 SFP Framer configuration. ALCATEL NOTE: TABLESIZE: 5 |
| 1.3.6.1.4.1.637.61.1.56.15.1 | Rowdsx1FramerEntry | not-accessible | mandatory | Each entry consists of a list of 2E1/DS1 SFP Framer parameters. A row entry is created or deleted in this table when the corresponding operation on a row is do… |
| 1.3.6.1.4.1.637.61.1.56.15.1.1 | Columndsx1FramerGenConfig | read-write | mandatory | Generai Configuration bitmap. bit 0: Framed (1) or unframed (0) TDM traffic selection bit 1: RAI transparent (only for E1) RAI: Remote Alarm Indication defined… |
| 1.3.6.1.4.1.637.61.1.56.15.1.2 | Columndsx1FramerLIU2IWFConfig | read-write | mandatory | Line Interface unit to Inter working Function Configuration bitmap. bit 0: Enable performance monitoring toward IWF bit 1: Enable AIS toward IWF bit 2: Enable … |
| 1.3.6.1.4.1.637.61.1.56.15.1.3 | Columndsx1FramerIWF2LIUConfig | read-write | mandatory | Generai Configuration bitmap. bit 0: Enable performance monitoring toward LIU bit 1: Enable AIS toward LIU bit 2: Enable RAI toward LIU (only for E1) bit 3: En… |
| 1.3.6.1.4.1.637.61.1.56.15.1.4 | Columndsx1FramerAlarmStatus | read-only | mandatory | Alarm Status bitmap. High value indicates an alarm has occured Bit 0 : CRC4 (Cylic Redundancy check-4) threshold alarm from LIU (only for E1) Bit 1 : CRC4 (Cyl… |
| 1.3.6.1.4.1.637.61.1.56.15.1.5 | Columndsx1FramerConfState | read-only | mandatory | Framer Configuration state bitmap. bit 0: high value indicates General Configuration fail bit 1: high value indicates LIU2IWF Configuration fail bit 2: high va… |
| 1.3.6.1.4.1.637.61.1.56.16 | Tabledsx1PWTDMProtocolEngineTable | not-accessible | mandatory | This table contains the 2E1/DS1 SFP protocol engine configuration information. ALCATEL NOTE: TABLESIZE: 11 DESCR: This Table is not supported, handled internal… |
| 1.3.6.1.4.1.637.61.1.56.16.1 | Rowdsx1PWTDMProtocolEngineEntry | not-accessible | mandatory | Each entry consists of a list of 2E1/DS1 SFP protocol engine parameters. |
| 1.3.6.1.4.1.637.61.1.56.16.1.1 | Columndsx1SfpProtLogicalSlot | read-only | mandatory | This is the first index of the dsx1sfpLogicalSlot. Normally, this object contains the Logical Slot ID (as defined in the Equipment MIB) of the card which has t… |
| 1.3.6.1.4.1.637.61.1.56.16.1.2 | Columndsx1SfpProtFaceplateNumber | read-only | mandatory | This is the second index of the dsx1PWTDMProtocolEngineTable. It is the number of the SFP cage, as shown on the card faceplate. If the faceplate cage number is… |
| 1.3.6.1.4.1.637.61.1.56.16.1.3 | Columndsx1PWTDMProtocolEngineDA1 | read-only | mandatory | MAC Destination Address 1 in DA pool (for Eth2TDM packet discard, verify whether received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO … |
| 1.3.6.1.4.1.637.61.1.56.16.1.4 | Columndsx1PWTDMProtocolEngineDA2 | read-only | mandatory | MAC Destination Address 2 in DA pool (for Eth2TDM packet discard, verify whether received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO … |
| 1.3.6.1.4.1.637.61.1.56.16.1.5 | Columndsx1PWTDMProtocolEngineDA3 | read-only | mandatory | MAC Destination Address 3 in DA pool (for Eth2TDM packet discard, verify whether received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO … |
| 1.3.6.1.4.1.637.61.1.56.16.1.6 | Columndsx1PWTDMProtocolEngineDA4 | read-only | mandatory | MAC Destination Address 4 in DA pool (for Eth2TDM packet discard, verify whether received packets DA is equal to this DA pool or not) ALCATEL NOTE: ACCESS: RO … |
| 1.3.6.1.4.1.637.61.1.56.16.1.7 | Columndsx1PWTDMProtocolEngineSA1 | read-only | mandatory | MAC Source Address 1 in SA pool (TDM2Eth, config SA on per PW basis) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: … |
| 1.3.6.1.4.1.637.61.1.56.16.1.8 | Columndsx1PWTDMProtocolEngineSA2 | read-only | mandatory | MAC Source Address 2 in SA pool (TDM2Eth, config SA on per PW basis) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: … |
| 1.3.6.1.4.1.637.61.1.56.16.1.9 | Columndsx1PWTDMProtocolEngineSA3 | read-only | mandatory | MAC Source Address 3 in SA pool (TDM2Eth, config SA on per PW basis) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: … |
| 1.3.6.1.4.1.637.61.1.56.16.1.10 | Columndsx1PWTDMProtocolEngineSA4 | read-only | mandatory | MAC Source Address 4 in SA pool (TDM2Eth, config SA on per PW basis) ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: NA DEFVALUE: 0 UNITS: … |
| 1.3.6.1.4.1.637.61.1.56.16.1.11 | Columndsx1RTPPayloadtype | read-only | mandatory | RTP payload type mode. 00 - PayloadType=all 0s, SSID=all 1s 01 - PayloadType=all 1s, SSID=all 1s 10 - PayloadType= ecid(18 downto 12), SSID=ecid 11 - PayloadTy… |
| 1.3.6.1.4.1.637.61.1.56.17 | TableltHostSfpConfigExtTable | not-accessible | mandatory | This table contains the host shelf LT SFP configuration information regarding link assignement to LT on FD-REM ALCATEL NOTE: TABLESIZE: 288 (Full FX-8 with FEL… |
| 1.3.6.1.4.1.637.61.1.56.17.1 | RowltHostSfpConfigExtEntry | not-accessible | mandatory | Each entry consists of a list of host shelf LT SFP configuration ltHostSfpConfigExtTable. |
| 1.3.6.1.4.1.637.61.1.56.17.1.1 | ColumnltHostConfigExtSfpFaceplateNumber | read-only | mandatory | This is the SFP number on the LT identified by ltHostConfigExtSfpLogSlotId. ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: YES INSRVMOD: NA RANGE: 1..24 DEFVALUE:… |
| 1.3.6.1.4.1.637.61.1.56.17.1.2 | ColumnltHostSfpCableToRack | read-write | mandatory | This is the Rack ID of the expansion shelf LSM which the SFP is planned to cable to. Value 0 means that no rack is specified. ALCATEL NOTE: ACCESS: NA USAGE: O… |
| 1.3.6.1.4.1.637.61.1.56.17.1.3 | ColumnltHostSfpCableToShelf | read-write | mandatory | This is the Shelf ID of the expansion shelf LSM which the host shelf SFP is planned to cable to. Value 0 means that no shelf is specified. ALCATEL NOTE: ACCESS… |
| 1.3.6.1.4.1.637.61.1.56.17.1.4 | ColumnltHostSfpCableToSlot | read-write | mandatory | This is the Slot ID of the expansion shelf LSM which the SFP is planned to cable to. Value 0 means that no slot is specified. ALCATEL NOTE: ACCESS: NA USAGE: O… |
| 1.3.6.1.4.1.637.61.1.56.17.1.5 | ColumnltHostConfigSfpLogSlotId | read-only | mandatory | The logical slot id of the board where the remote LT is plugged in ALCATEL NOTE: ACCESS: NA USAGE: OPT PERSIST: YES INSRVMOD: YES RANGE: DEP / depends on the s… |
| 1.3.6.1.4.1.637.61.1.56.18 | TableltHostSfpStatusTable | not-accessible | mandatory | This table contains the host shelf SFP or XFP status information. ALCATEL NOTE: TABLESIZE: 26 |
| 1.3.6.1.4.1.637.61.1.56.18.1 | RowltHostSfpStatusEntry | not-accessible | mandatory | Each entry consists of a list of SFP or XFP status parameters. |
| 1.3.6.1.4.1.637.61.1.56.18.1.1 | ColumnltHostStatusSfpFaceplateNumber | read-only | mandatory | This is the host shelf SFP or XFP cage number. For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1). For an XFP cage, it is 256 + (the faceplat… |
| 1.3.6.1.4.1.637.61.1.56.18.1.2 | ColumnltLanxPortNumber | read-only | mandatory | This is the Physical LANX or IHUB port to which the SFP or XFP is connected to. For an SHUB system, the lanxPortNumber here corresponds to lanxInterfaceIndex i… |
| 1.3.6.1.4.1.637.61.1.56.18.1.3 | ColumnltHostSfpDownlinkStatus | read-only | mandatory | This is the host shelf SFP or XFP status. ok (1): The SFP or XFP is operational. sfpNotPresent (2): The SFP or XFP cage is empty. los (3): The SFP or XFP has d… |
| 1.3.6.1.4.1.637.61.1.56.18.1.4 | ColumnltHostSfpCabledToRack | read-only | mandatory | This is the Rack ID of the expansion shelf LSM to which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. ALCAT… |
| 1.3.6.1.4.1.637.61.1.56.18.1.5 | ColumnltHostSfpCabledToShelf | read-only | mandatory | This is the Shelf ID of the expansion shelf LSM which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. ALCATEL… |
| 1.3.6.1.4.1.637.61.1.56.18.1.6 | ColumnltHostSfpCabledToSlot | read-only | mandatory | This is the Slot ID of the expansion shelf LSM which the host shelf SFP is cabled to. Value 0 means that SFP is not cabled to any expansion shelf LSM. ALCATEL … |
| 1.3.6.1.4.1.637.61.1.56.18.1.7 | ColumnltHostSfpType | read-only | mandatory | This variable indicates the type of the SFP or XFP, as read from the device. It is a bitmap represented as a sum, therefore, it can represent multiple types (c… |
| 1.3.6.1.4.1.637.61.1.56.18.1.8 | ColumnltHostSfpCablingMismatch | read-only | mandatory | This is the host shelf SFP cabling mismatch status: noMismatch(1): no cabling mismatch is detected. unexpectedRemoteLt(2): a remote LT is detected at an unassi… |
| 1.3.6.1.4.1.637.61.1.56.18.1.9 | ColumnltHostSfpCabledToPhysAddress | read-only | mandatory | The physical (MAC) address of the remote interface that is cabled to this host shelf SFP. If the remote interface does not have such an address or the address … |
| 1.3.6.1.4.1.637.61.1.56.18.1.10 | ColumnltHostStatusSfpLogSlotId | read-only | mandatory | The logical slot id of the board where the remote LT is plugged in ALCATEL NOTE: ACCESS: RO USAGE: NA PERSIST: NO INSRVMOD: NA RANGE: NA DEFVALUE: NA UNITS: NA… |