BROCADE-SPX-MIB
47 objects
Management Information for 802.1BR SPX system configuration and operational status. Supported Platforms: - supported on FastIron ICX7750/ICX7450 platforms. Copyright 1996-2017 Ruckus Wireless, Inc. All rights reserved. This Ruckus Wireless, Inc SNMP Management Information Base Specification embodies Ruckus Wireless, Inc confidential and proprietary intellectual property. Ruckus Wireless, Inc retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Ruckus Wireless, Inc Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Imported Objects
| FOUNDRY-SN-AGENT-MIB | DisplayString |
| FOUNDRY-SN-SWITCH-GROUP-MIB | snSwitch |
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.40 | IdentitybrcdSPXMIB | Management Information for 802.1BR SPX system configuration and operational status. Supported Platforms: - supported on FastIron ICX7750/ICX7450 platforms. Cop… | ||
| 1.3.6.1.4.1.1991.1.1.3.40.1 | NodebrcdSPXGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.40.1.1 | ScalarbrcdSPXGlobalConfigCBState | read-write | current | Configure CB (Control Bridge) state for 802.1BR feature on the global level. The set operation is allowed only on CB device. none: reserve state. enable: 802.1… |
| 1.3.6.1.4.1.1991.1.1.3.40.1.2 | ScalarbrcdSPXGlobalConfigPEState | read-write | current | Configure PE (Port Extender) state for 802.1BR feature on the global level. The set operation is allowed only on PE standalone device. none: reserve state enab… |
| 1.3.6.1.4.1.1991.1.1.3.40.1.3 | ScalarbrcdSPXGlobalConfigZeroTouchEnable | read-write | current | Configure CB (Control Bridge) Zero Touch feature for 802.1BR on the global level. The Zero Touch feature discovers new PE capable units, assigns them IDs, defi… |
| 1.3.6.1.4.1.1991.1.1.3.40.1.4 | ScalarbrcdSPXGlobalConfigZeroTouchDeny | read-write | current | Configure CB (Control Bridge) Zero Touch for 802.1BR on the global level. The Zero Touch feature discovers new PE capable units, assigns them IDs, defines SPX-… |
| 1.3.6.1.4.1.1991.1.1.3.40.1.5 | ScalarbrcdSPXGlobalConfigAllowPEMovement | read-write | current | Configure CB (Control Bridge) allow PE (Port Extender) movement for 802.1BR feature on the global level.It allows the user to move PE unit without changing its… |
| 1.3.6.1.4.1.1991.1.1.3.40.2 | NodebrcdSPXTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.40.2.1 | TablebrcdSPXConfigUnitTable | not-accessible | current | 802.1BR SPX configuration unit table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1 | RowbrcdSPXConfigUnitEntry | not-accessible | current | An entry in SPX configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.1 | ColumnbrcdSPXConfigUnitIndex | not-accessible | current | The SPX unit Id. CB unit ID is from 1 to 16. PE unit ID is from 17 to 56 |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.2 | ColumnbrcdSPXConfigUnitPEName | read-write | current | A name description of PE unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.3 | ColumnbrcdSPXConfigUnitPESPXPort1 | read-write | current | A PE SPX port on PE unit. It returns 0 if SPX port does not exist. Note that the maximum PE SPX port on a PE unit is 2. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.4 | ColumnbrcdSPXConfigUnitPESPXPort2 | read-write | current | A PE SPX port on PE unit. It returns 0 if SPX port does not exist. Note that the maximum PE SPX port on a PE unit is 2. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.5 | ColumnbrcdSPXConfigUnitPESPXLag1 | read-write | current | A list of interface indices which are the port membership of a SPX LAG group on PE. Each interface index is a 32-bit integer in big endian order. It returns NU… |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.6 | ColumnbrcdSPXConfigUnitPESPXLag2 | read-write | current | A list of interface indices which are the port membership of a SPX LAG group on PE. Each interface index is a 32-bit integer in big endian order. It returns NU… |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.7 | ColumnbrcdSPXConfigUnitRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.8 | ColumnbrcdSPXConfigUnitType | read-only | current | A description of the configured/active system type for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.1.1.9 | ColumnbrcdSPXConfigUnitState | read-only | current | A state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2 | TablebrcdSPXOperUnitTable | not-accessible | current | 802.1BR SPX operation unit table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1 | RowbrcdSPXOperUnitEntry | not-accessible | current | An entry in SPX operation table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.1 | ColumnbrcdSPXOperUnitIndex | not-accessible | current | The SPX unit Id. CB unit ID is from 1 to 16. PE unit ID is from 17 to 56 |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.2 | ColumnbrcdSPXOperUnitType | read-only | current | A description of the configured/active system type for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.3 | ColumnbrcdSPXOperUnitRole | read-only | current | A role for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.4 | ColumnbrcdSPXOperUnitMac | read-only | current | A MAC address for each unit |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.5 | ColumnbrcdSPXOperUnitPriority | read-only | current | The priority in Active/backup election on CB units. PE unit doesn't have priority, and 0 as default value. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.6 | ColumnbrcdSPXOperUnitState | read-only | current | A state for each unit |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.7 | ColumnbrcdSPXOperUnitDescription | read-only | current | Describes the CB stacking or PE joining state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.8 | ColumnbrcdSPXOperUnitImgVer | read-only | current | The version of the running software image for each unit |
| 1.3.6.1.4.1.1991.1.1.3.40.2.2.1.9 | ColumnbrcdSPXOperUnitBuildlVer | read-only | current | The version of the running software build for each unit |
| 1.3.6.1.4.1.1991.1.1.3.40.2.3 | TablebrcdSPXCBSPXPortTable | not-accessible | current | SPX configuration CB SPX port table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.3.1 | RowbrcdSPXCBSPXPortEntry | not-accessible | current | An entry in the SPX configuration CB SPX port table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.3.1.1 | ColumnbrcdSPXCBSPXPortPort | not-accessible | current | The IfIndex for the configured CB SPX port. CB unit can have multiple SPX ports per unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.3.1.2 | ColumnbrcdSPXCBSPXPortPEGroup | read-write | current | The name of IfIndex for the configured CB SPX port. It is an optional field |
| 1.3.6.1.4.1.1991.1.1.3.40.2.3.1.3 | ColumnbrcdSPXCBSPXPortRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...create… |
| 1.3.6.1.4.1.1991.1.1.3.40.2.4 | TablebrcdSPXCBSPXLagTable | not-accessible | current | SPX configuration CB SPX LAG table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.4.1 | RowbrcdSPXCBSPXLagEntry | not-accessible | current | An entry in the SPX configuration CB SPX LAG table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.4.1.1 | ColumnbrcdSPXCBSPXLagPrimaryPort | not-accessible | current | The LAG primary port for the configured CB SPX LAG. This primary port is the smallest port in the CB SPX LAG group. CB unit can have multiple SPX LAGs per unit. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.4.1.2 | ColumnbrcdSPXCBSPXLagLagIflist | read-write | current | A list of interface indices which are the port membership of a SPX Lag group on CB. Each interface index is a 32-bit integer in big endian order. It returns NU… |
| 1.3.6.1.4.1.1991.1.1.3.40.2.4.1.3 | ColumnbrcdSPXCBSPXLagPEGroup | read-write | current | The name of SPX LAG for the configured CB SPX LAG. It is an optional field |
| 1.3.6.1.4.1.1991.1.1.3.40.2.4.1.4 | ColumnbrcdSPXCBSPXLagRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...create… |
| 1.3.6.1.4.1.1991.1.1.3.40.2.5 | TablebrcdSPXPEGroupTable | not-accessible | current | SPX CB SPX port and PE group table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.5.1 | RowbrcdSPXPEGroupEntry | not-accessible | current | An entry in the SPX PE group table. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.5.1.1 | ColumnbrcdSPXPEGroupCBSPXPort | not-accessible | current | The IfIndex for the CB SPX port which is connected to a group of PE units |
| 1.3.6.1.4.1.1991.1.1.3.40.2.5.1.2 | ColumnbrcdSPXPEGroupPEGroup | read-only | current | The name of IfIndex for the configured CB SPX port. It is an optional field |
| 1.3.6.1.4.1.1991.1.1.3.40.2.5.1.3 | ColumnbrcdSPXPEGroupPEIdList | read-only | current | A list of PE unit ID indices which are attached to a CB SPX port. |
| 1.3.6.1.4.1.1991.1.1.3.40.2.5.1.4 | ColumnbrcdSPXPEGroupCBSPXEndPort | read-only | current | The IfIndex for the CB SPX port which is connected to a group of PE units. This CB SPX port is at other end if it is a ring topology. It returns 0 if it is a c… |