CADANT-CMTS-PACKETCABLE-MIB
101 objects
PacketCable general-purpose management MIB. This MIB contains objects which are specific to PacketCable but not covered in any of the more-specialized MIBS.
Imported Objects
| CADANT-CMTS-DOWNCHANNEL-MIB | cadIfCmtsCardNumber |
| CADANT-CMTS-PROCESS-MIB | cadOvSysCpuStatus |
| CADANT-PRODUCTS-MIB | cadCable |
| CADANT-TC | AdminState CardId |
| DOCS-QOS3-MIB | IfDirection |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.115 | IdentitycadPCMIB | PacketCable general-purpose management MIB. This MIB contains objects which are specific to PacketCable but not covered in any of the more-specialized MIBS. | ||
| 1.3.6.1.4.1.4998.1.1.115.1 | NodecadPCMibObjects | |||
| 1.3.6.1.4.1.4998.1.1.115.1.1 | NodecadPCMibBase | |||
| 1.3.6.1.4.1.4998.1.1.115.1.1.3 | ScalarcadPCPreemptionAllowed | read-write | current | Indicates whether the system will preempt another session for an emergency call. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.4 | ScalarcadPCUpNormAllowedUsage | read-write | current | Maximum percentage of upstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources non-exclusively all… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.5 | ScalarcadPCUpNormResUsage | read-write | current | Minimum percentage of upstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources exclusively allocat… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.6 | ScalarcadPCUpEmerAllowedUsage | read-write | current | Maximum percentage of upstream resources that may be used by emergency telephony services. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.7 | ScalarcadPCUpEmerResUsage | read-write | current | Minimum percentage of upstream resources that may be used by emergency telephony services. If the value of this object is non-zero, then a portion of the upstr… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.8 | ScalarcadPCDownNormAllowedUsage | read-write | current | Maximum percentage of downstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources non-exclusively a… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.9 | ScalarcadPCDownNormResUsage | read-write | current | Minimum percentage of downstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources exclusively alloc… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.10 | ScalarcadPCDownEmerAllowedUsage | read-write | current | Maximum percentage of downstream resources that may be used by emergency telephony services. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.11 | ScalarcadPCDownEmerResUsage | read-write | current | Minimum percentage of downstream resources that may be used by emergency telephony services. If the value of this object is non-zero, then a portion of the ups… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.12 | TablecadPCCAMTable | not-accessible | current | Table of Per-CAM PacketCable Data for 2D12U only |
| 1.3.6.1.4.1.4998.1.1.115.1.1.12.1 | RowcadPCCAMEntry | not-accessible | current | This entry contains all of the PacketCable data that is to be managed on a per-CAM basis. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.1 | ColumncadFreeDSxAllowed | read-write | current | Indicates whether the authorization module will allow a DOCSIS MAC Messaging Dynamic Services request (DSx) without a gate-ID in an authorization block. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.2 | ColumncadPCMaxOverloadDSaCalls | read-write | current | the max number of connections we will allow per 10 second interval when the system cpu is in a normal condition, i.e. no overload. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.3 | ColumncadPCMaxYellowOverloadDSaCalls | read-write | current | the max number of connections we will allow per 10 second interval when the system cpu is in a yellow overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.4 | ColumncadPCMaxRedOverloadDSaCalls | read-write | current | the max number of connections we will allow per 10 second interval when the system cpu is in a red overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.12.1.5 | ColumncadPCCardId | not-accessible | current | The unique id of this card within the shelf. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.13 | ScalarcadPCAdminState | read-write | current | The administrative state of PacketCable services on the CMTS. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.14 | ScalarcadPCMaxOverloadCalls | read-write | obsolete | the max number of connections we will allow per 10 second interval when the system cpu is in a normal condition, i.e. no overload. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.15 | ScalarcadPCMaxYellowOverloadCalls | read-write | obsolete | the max number of connections we will allow per 10 second interval when the system cpu is in a yellow overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.16 | ScalarcadPCMaxRedOverloadCalls | read-write | obsolete | the max number of connections we will allow per 10 second interval when the system cpu is in a red overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.17 | ScalarcadPCDownTotalAllowedUsage | read-write | current | Maximum percentage of downstream resources that may be used by both normal and emergency telephony services. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.18 | ScalarcadPCUpTotalAllowedUsage | read-write | current | Maximum percentage of upstream resources that may be used by both normal and emergency telephony services. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.19 | ScalarcadPCMaxOverloadGateMsgs | read-write | current | the max number of gate messages that the system will process per 10 second interval when the system cpu is in a normal condition, i.e. no overload. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.20 | ScalarcadPCMaxYellowOverloadGateMsgs | read-write | current | the max number of gate messages that the system will process per 10 second interval when the system cpu is in a yellow overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.21 | ScalarcadPCMaxRedOverloadGateMsgs | read-write | current | the max number of gate messages that the system will process per 10 second interval when the system cpu is in a red overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.25 | ScalarcadPCClearGateCounts | read-write | current | set to true to clear the gate counts, always false when read |
| 1.3.6.1.4.1.4998.1.1.115.1.1.26 | ScalarcadPCClearAnomalyCounts | read-write | current | set to true to clear the anomaly counts, always false when read |
| 1.3.6.1.4.1.4998.1.1.115.1.1.27 | ScalarcadPCClearConnRateOverloadCounts | read-write | current | set to true to clear the connection rate overload counts, always false when read |
| 1.3.6.1.4.1.4998.1.1.115.1.1.28 | ScalarcadPCClearEvMsgCounts | read-write | current | set to true to clear the event messaging counts, always false when read |
| 1.3.6.1.4.1.4998.1.1.115.1.1.29 | ScalarcadPCClearCopsCounts | read-write | current | set to true to clear the COPS counts, always false when read |
| 1.3.6.1.4.1.4998.1.1.115.1.1.30 | ScalarcadPCClearGateCtlCounts | read-write | current | set to true to clear the gate control counts, always false when read |
| 1.3.6.1.4.1.4998.1.1.115.1.1.40 | NodecadPCMibGateCounts | |||
| 1.3.6.1.4.1.4998.1.1.115.1.1.40.1 | ScalarcadPCTotalGateCount | read-only | current | Total number of gates that have been created since the last reboot of the system or since the last time that this counter was manually reset. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.40.2 | ScalarcadPCGateAllocatedStateCount | read-only | current | Total number of gates that are currently in the ALLOCATED state |
| 1.3.6.1.4.1.4998.1.1.115.1.1.40.3 | ScalarcadPCGateAuthorizedStateCount | read-only | current | Total number of gates that are currently in the AUTHORIZED state |
| 1.3.6.1.4.1.4998.1.1.115.1.1.40.4 | ScalarcadPCGateReservedStateCount | read-only | current | Total number of gates that are currently in the RESERVED state |
| 1.3.6.1.4.1.4998.1.1.115.1.1.40.5 | ScalarcadPCGateCommittedStateCount | read-only | current | Total number of gates that are currently in the COMMITTED state |
| 1.3.6.1.4.1.4998.1.1.115.1.1.40.6 | ScalarcadPCGateLastCleared | read-only | current | The value of sysUptime when the gate counts were last cleared. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.45 | TablecadPCAnomalyCountTable | not-accessible | current | Table of anomaly counts |
| 1.3.6.1.4.1.4998.1.1.115.1.1.45.1 | RowcadPCAnomalyCountEntry | not-accessible | current | Entry of anomaly counts |
| 1.3.6.1.4.1.4998.1.1.115.1.1.45.1.1 | ColumncadPCAnomalyCode | not-accessible | current | PacketCable anomaly code |
| 1.3.6.1.4.1.4998.1.1.115.1.1.45.1.2 | ColumncadPCAnomalyCount | read-only | current | Count of anomalies of the corresponding type that have occurred since boot or since the last manual reset of this count. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.46 | ScalarcadPCAnomalyLastCleared | read-only | current | The value of sysUptime when the anomaly counts were last cleared. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.47 | ScalarcadPCSendSubId | read-write | current | Indicates whether the C4 will send a subscriber ID in every DQoS gate-open and gate-close message. This is provisioned per-CMTS. ECN DQOS1.5-N-06.0339-4 |
| 1.3.6.1.4.1.4998.1.1.115.1.1.50 | TablecadPCConnRateReqHistoryTable | not-accessible | current | Table of connection request rate history |
| 1.3.6.1.4.1.4998.1.1.115.1.1.50.1 | RowcadPCConnRateReqHistoryEntry | not-accessible | current | Entry of connection request rate |
| 1.3.6.1.4.1.4998.1.1.115.1.1.50.1.1 | ColumncadPCConnRateReqHistoryTimeStamp | not-accessible | current | Value of sysUpTime (rounded down to the nearest second) when this entry was created |
| 1.3.6.1.4.1.4998.1.1.115.1.1.50.1.2 | ColumncadPCConnRateReqHistoryCount | read-only | current | Count of connection requests (gates) made during the second |
| 1.3.6.1.4.1.4998.1.1.115.1.1.51 | ScalarcadPCConnReqMaxHistRate | read-only | current | Maximum value of any cadPCConnReqRateCount since system boot or reset of this value. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.55 | TablecadPCConnRateOverloadRejTable | not-accessible | current | Table of Per-card rate overload reject connection counts |
| 1.3.6.1.4.1.4998.1.1.115.1.1.55.1 | RowcadPCConnRateOverloadRejEntry | not-accessible | current | This entry contains the connection rate overload rejection counts. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.55.1.1 | ColumncadPCConnRateOverloadRejCount | read-only | current | Number of connections that have been rejected as a result of rate overload protection while the system is in the corresponding system-wide overload state since… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.55.1.2 | ColumncadPCConnRateOverloadRejCardId | not-accessible | current | The unique id of this card within the shelf. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.56 | ScalarcadPCConnRateOverloadLastCleared | read-only | current | The value of sysUptime when the connection rate overload counts were last cleared. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.60 | TablecadPCEvMsgCountTable | not-accessible | current | Table of counts of event messages that have been transmitted to each RKS or DF (for Electronic Surveillance Call Data) server |
| 1.3.6.1.4.1.4998.1.1.115.1.1.60.1 | RowcadPCEvMsgCountEntry | not-accessible | current | This entry contains counts of event messages that have been transmitted |
| 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.1 | ColumncadPCEvMsgCountServer | not-accessible | current | IP address of RKS or DF server |
| 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.2 | ColumncadPCEvMsgServerIsDF | not-accessible | current | Indicator of type of server. Set to true(1) if server is a delivery function server. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.3 | ColumncadPCEvMsgType | read-only | current | Type of message being counted. These map directly to the event message opcodes in the Event Messaging reference |
| 1.3.6.1.4.1.4998.1.1.115.1.1.60.1.4 | ColumncadPCEvMsgCount | read-only | current | Count of rejected connections due to channel bandwidth congestion since boot or since the last manual reset of this count. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.61 | ScalarcadPCEvMsgCountLastCleared | read-only | current | The value of sysUptime when the event messaging counts were last cleared. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.65 | TablecadPCCopsCountTable | not-accessible | current | Table of counts of event messages that have been sent to or received from each server. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.65.1 | RowcadPCCopsCountEntry | not-accessible | current | This entry contains counts of COPS messages. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.1 | ColumncadPCCopsServer | not-accessible | current | IP address of CMS or PS server |
| 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.2 | ColumncadPCCopsDirection | not-accessible | current | direction of message flow from viewpoint of the CMTS |
| 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.3 | ColumncadPCCopsOpcode | not-accessible | current | Type of message being counted. These map directly to the COPS opcodes in RFC 2748. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.65.1.4 | ColumncadPCCopsCount | read-only | current | Count of COPS messages |
| 1.3.6.1.4.1.4998.1.1.115.1.1.66 | ScalarcadPCCopsCountLastCleared | read-only | current | The value of sysUptime when the COPS counts were last cleared. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.70 | TablecadPCGateCtlCountTable | not-accessible | current | Table of counts of event messages that have been sent to or received from each server. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.70.1 | RowcadPCGateCtlCountEntry | not-accessible | current | This entry contains counts of gate control messages. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.70.1.1 | ColumncadPCGateCtlOpcode | not-accessible | current | Type of message being counted. These map directly to the gate command type opcodes in the DQoS spec. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.70.1.2 | ColumncadPCGateCtlCount | read-only | current | Count of messages since boot or since the last manual reset of this count. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.71 | ScalarcadPCGateCtlCountLastCleared | read-only | current | The value of sysUptime when the gate control counts were last cleared. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.75 | TablecadPCDefAdmCtlTable | not-accessible | current | Table of Per-Priority PacketCable admission control policies |
| 1.3.6.1.4.1.4998.1.1.115.1.1.75.1 | RowcadPCDefAdmCtlEntry | not-accessible | current | This entry contains all of the default PacketCable admission policy data. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.1 | ColumncadPCDefAdmCtlDirection | not-accessible | current | Direction for this default policy data. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.2 | ColumncadPCDefAdmCtlPriority | not-accessible | current | Priority value assigned to this row. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.3 | ColumncadPCDefAdmCtlAllowedUsage | read-write | current | Maximum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources non-exclusively … |
| 1.3.6.1.4.1.4998.1.1.115.1.1.75.1.4 | ColumncadPCDefAdmCtlReservedUsage | read-write | current | Minimum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources exclusively allo… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.80 | TablecadPC1xAdmCtlMapTable | not-accessible | current | Table of mappings of PacketCable 1.x to PacketCable Multimedia admission control policies |
| 1.3.6.1.4.1.4998.1.1.115.1.1.80.1 | RowcadPC1xAdmCtlMapEntry | not-accessible | current | This entry contains mapping of one PacketCable 1.x admission policy to a PacketCable Multimedia policy. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.80.1.1 | ColumncadPC1xAdmCtlMapPriority | not-accessible | current | PacketCable 1.x session class priority value |
| 1.3.6.1.4.1.4998.1.1.115.1.1.80.1.2 | ColumncadPCAdmCtlMapPriority | read-only | current | PacketCable Multimedia Priority value assigned to this row. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.85 | TablecadPCInterfaceAdmCtlTable | not-accessible | current | Table of Per-Priority PacketCable admission control policies. There exists a row per cable downstream and per cable upstream for each of the CadPCAdmCtlPriorit… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.85.1 | RowcadPCInterfaceAdmCtlEntry | not-accessible | current | This entry contains all of the default PacketCable admission policy data. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.85.1.1 | ColumncadPCInterfaceAdmCtlPriority | not-accessible | current | Priority value assigned to this row. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.85.1.2 | ColumncadPCInterfaceAdmCtlAllowedUsage | read-write | current | Maximum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources non-exclusively … |
| 1.3.6.1.4.1.4998.1.1.115.1.1.85.1.3 | ColumncadPCInterfaceAdmCtlReservedUsage | read-write | current | Minimum percentage of resources that may be used by requests at the corresponding priority level. This is also the maximum amount of resources exclusively allo… |
| 1.3.6.1.4.1.4998.1.1.115.1.1.86 | TablecadPCCAMCblMacTable | not-accessible | current | Table of Per-CAM PacketCable Data |
| 1.3.6.1.4.1.4998.1.1.115.1.1.86.1 | RowcadPCCAMCblMacEntry | not-accessible | current | This entry contains all of the PacketCable data that is to be managed on a per-mac domain basis. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.1 | ColumncadPCCAMCblMacIfIndex | not-accessible | current | Indicates whether the authorization module will allow a DOCSIS MAC Messaging Dynamic Services request (DSx) without a gate-ID in an authorization block. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.2 | ColumncadPCCAMCblMacFreeDSxAllowed | read-write | current | Indicates whether the authorization module will allow a DOCSIS MAC Messaging Dynamic Services request (DSx) without a gate-ID in an authorization block. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.3 | ColumncadPCCblMacMaxOverloadDSaCalls | read-write | current | the max number of connections we will allow per 10 second interval when the system cpu is in a normal condition, i.e. no overload. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.4 | ColumncadPCCblMacMaxYellowOverloadDSaCalls | read-write | current | the max number of connections we will allow per 10 second interval when the system cpu is in a yellow overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.86.1.5 | ColumncadPCCblMacMaxRedOverloadDSaCalls | read-write | current | the max number of connections we will allow per 10 second interval when the system cpu is in a red overload condition. |
| 1.3.6.1.4.1.4998.1.1.115.1.1.90 | ScalarcadPCPEPIDHostname | read-write | current | If set to true, the PEP-ID on the COPS connection will set to the currently configured hostname of the CMTS. If false, the PEP-ID will will be set to the local… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CadPCAdmCtlPriority | INTEGER { eightPriority (1), seventhPriority (2), sixthPriority (3), fifthPriority (4), fourthPriority (5), thirdPriority (6), secondPriority (7), firstPriority (8) } | current | Symbolic description of CAC priority levels for PacketCable sessions. Note that the MIB values are one greater than the Session Class priority values defined in the PacketCable MultiMedia Specification. |
| CadPCAnomalyCode | INTEGER { deletedLocalGateCoordinationFailure (1), deletedRemoteGateCoordinationFailure (2), deletedRevokedAuthorization (3), deletedUnexpectedGateOpen (4), deletedLocalGateCloseFailure (5), deletedUnknownReason (127), failedNoGatesAvailable (65535), closedPreemptionOfResources (65537), closedLackOfReservationMaintenance (65538), closedMTADeregistration (65539), closedTimerT0Expiry (65540), closedTimerT1Rxpiry (65541), closedTimerT7Rxpiry (65542), closedTimerT8Rxpiry (65543), closedUnknownReason (65663), failedUnknownGateId (131072), failedIllegalSessionClassValue (196608), failedMTAExceededGateLimit (262144), failedGateAlreadySet (327680), failedMissingRequiredObject (393216), failedInvalidObject (458752), failedUnknownReason (8323072) } | current | Corresponds to the PacketCable Reason and PacketCable Error codes documented in PKT-SP-DQOS-I06-030415. To get index for PacketCable Error, mask off the low-order 16-bit Error Sub-code. The PacketCable Reasons match the… |