CADANT-CMTS-SPECTRUM-MGMT-MIB
68 objects
The MIB module describes the C4 Upstream Spectrum Management
Imported Objects
| CADANT-CMTS-UPCHANNEL-MIB | cadIfUpstreamChannelEntry |
| CADANT-PRODUCTS-MIB | cadSpectrum |
| DOCS-IF-MIB | TenthdB |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.15.4 | IdentitycadSpMgtMib | The MIB module describes the C4 Upstream Spectrum Management | ||
| 1.3.6.1.4.1.4998.1.1.15.4.1 | NodecadSpMgtNotifications | |||
| 1.3.6.1.4.1.4998.1.1.15.4.2 | NodecadSpMgtObjects | |||
| 1.3.6.1.4.1.4998.1.1.15.4.2.1 | NodecadSpMgtGroup | |||
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1 | TablecadSpMgtGroupTable | not-accessible | current | Each entry in this table defines a C4 Upstream Spectrum Management group. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1 | RowcadSpMgtGroupEntry | not-accessible | current | A set of C4 Upstream Spectrum Management group information. Entries in the cadSpMgtGroupTable are created and deleted using the cadSpMgtGroupRowStatus object. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.1 | ColumncadSpMgtGroupIndex | not-accessible | current | The index used to identify the Upstream Spectrum Group. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.2 | ColumncadSpMgtGroupSamplePeriod | read-create | current | The time (in seconds) between samples used for the degradation and the improvement triggers. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.3 | ColumncadSpMgtGroupHopPeriod | read-create | current | The minimum period of time (in seconds) that must pass between successive state transitions. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.4 | ColumncadSpMgtGroupCodeword | read-create | current | The minimum number of codewords that must have been transmitted on the upstream channel before the degradation and improvement triggers are considered to be va… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.5 | ColumncadSpMgtGroupRetryPeriod | read-create | current | This object specifies the minimum wait time (in seconds) before the retry is attempted. The retry-period timer controls how quickly the state machine is allowe… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.6 | ColumncadSpMgtGroupEnabled | read-create | current | This object allows for the optional enabling and disabling of a spectrum group. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.1.1.7 | ColumncadSpMgtGroupRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). Support of the values includes createAndGo(4) and destroy(… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.2 | TablecadSpMgtStateTable | not-accessible | current | Each entry in this table defines a state used for C4 Upstream Spectrum Management. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1 | RowcadSpMgtStateEntry | not-accessible | current | A set of Upstream Spectrum Management state information. Entries in the cadSpMgtStateTable are created and deleted using the cadSpMgtStateRowStatus object. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.1 | ColumncadSpMgtStateIndex | not-accessible | current | The index used to identify the state in C4 Upstream Spectrum Management. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.2 | ColumncadSpMgtStateFrequency | read-create | current | The center of the frequency band for the upstream channel associated with this state. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.3 | ColumncadSpMgtStateWidth | read-create | current | The bandwidth for the upstream channel associated with this state. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.4 | ColumncadSpMgtStateModulationProfile | read-create | current | An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes the upstream channel associated with this state. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.2.1.5 | ColumncadSpMgtStateRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). Support of the values includes createAndGo(4) and destroy(… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3 | TablecadSpMgtTriggerTable | not-accessible | current | Each entry in this table defines a trigger for C4 Upstream Spectrum Management |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1 | RowcadSpMgtTriggerEntry | not-accessible | current | A set of Upstream Spectrum Management trigger information. Entries in the cadSpMgtTriggerTable are created and deleted using the cadSpMgtTriggerRowStatus objec… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.1 | ColumncadSpMgtTriggerIndex | not-accessible | current | The trigger index used to identify the trigger for each state transition. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.2 | ColumncadSpMgtTriggerType | read-create | current | The trigger type. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.3 | ColumncadSpMgtTriggerDay | read-create | current | The trigger day is to specify the reoccurrence of the TOD trigger for a week. The trigger day has the following defined values: 0: Sunday 1: Monday 2: Tuesday … |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.4 | ColumncadSpMgtTriggerTOD | read-create | current | Time of day to transition to next state, in HH:MM:SS format |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.5 | ColumncadSpMgtTriggerPeriod | read-create | current | The amount of time that should be loaded into a timer, in seconds, once the state machine has transitioned into the associated current state. When the timer ex… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.6 | ColumncadSpMgtTriggerThres1 | read-create | current | This object is applicable for trigger type of degradation (3) and improvement (4). For degradation trigger, this is the maximum acceptable percentage of FEC er… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.7 | ColumncadSpMgtTriggerThres2 | read-create | current | This object is applicable for trigger type of degradation (3) and improvement (4). For degradation trigger, this is the maximum acceptable percentage of uncorr… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.8 | ColumncadSpMgtTriggerThres3 | read-create | current | This object is applicable for trigger type of degradation (3) and improvement (4). For degradation trigger, this is the minimum acceptable Signal/Noise ratio (… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.3.1.9 | ColumncadSpMgtTriggerRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). Support of the values includes createAndGo(4) and destroy(… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.4 | TablecadSpMgtStateTransTable | not-accessible | current | Each entry in this table defines the state machine in C4 Upstream Spectrum Management. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.4.1 | RowcadSpMgtStateTransEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.4.1.1 | ColumncadSpMgtTransNextState | read-create | current | The index used to identify the next state to which the state machine may transition to as a result of this trigger. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.4.1.2 | ColumncadSpMgtStateTransRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). Support of the values includes createAndGo(4) and destroy(… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5 | TablecadSpMgtHistoryTable | not-accessible | current | Table of state transition history. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1 | RowcadSpMgtHistoryEntry | not-accessible | current | Entry of state transition history. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.1 | ColumncadSpMgtHistoryUpChannelIfIndex | not-accessible | current | IfIndex of the upstream channel. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.2 | ColumncadSpMgtHistoryTime | not-accessible | current | The value of this object is the actual clock time when this entry was created. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.3 | ColumncadSpMgtHistoryTriggerIndex | read-only | current | The trigger index used to identify the trigger for state transition. A value of 0 indicates a manual trigger. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.4 | ColumncadSpMgtHistoryFromStateIndex | read-only | current | The index used to identify the current state. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.5 | ColumncadSpMgtHistoryNextStateIndex | read-only | current | The index used to identify the next state to which the state machine may transition to. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.6 | ColumncadSpMgtHistoryResultStateIndex | read-only | current | The index used to identify the result state to which the state machine has transitioned to. For a successful state transition request, the value of this object… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.7 | ColumncadSpMgtHistorySNR | read-only | current | This object is the measured Signal/Noise ratio (in dB) for the upstream channel. This object is applicable when the value in cadSpMgtHistoryTriggerIndex define… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.8 | ColumncadSpMgtHistoryUFecError | read-only | current | This object is the measured percentage of uncorrectable FEC errors for the upstream channel. This object is applicable when the value in cadSpMgtHistoryTrigger… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.9 | ColumncadSpMgtHistoryFecError | read-only | current | This object is the measured percentage of FEC errors (uncorrectable plus correctable) for the upstream channel. This object is applicable when the value in cad… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.10 | ColumncadSpMgtHistorySpareCardId | read-only | current | The cardId of the spare CAM. The value of 0 indicates the CAM is not spared at the time the request is received. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.11 | ColumncadSpMgtHistoryText | read-only | current | This object provides a human-readable description of the entry, including all relevant context. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.12 | ColumncadSpMgtHistoryGroupId | read-only | current | The Upstream Spectrum Group index associated with the upstream channel. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.13 | ColumncadSpMgtHistoryStateChangeCount | read-only | current | Provides the count of state changes in the history entry. This object will always increase. It is 16 bits, once it is at 0xffff, the counter will roll over and… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.5.1.14 | ColumncadSpMgtHistorySysUpTime | read-only | current | Provides the system up time in the history entry. This object will always increase. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.6 | TablecadSpMgtUpChannelTable | not-accessible | current | This table describes Upstream Frequency Agility attributes of attached upstream channels. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.6.1 | RowcadSpMgtUpChannelEntry | not-accessible | current | The List of Upstream Frequency Agility attributes associated with an upstream channel. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.6.1.1 | ColumncadSpMgtUpChannelCurrState | read-only | current | The current state as a result of the upstream spectrum group state transition. This object is only applicable if upstream spectrum management is enabled for th… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.1.6.1.2 | ColumncadSpMgtUpChannelStateTransTime | read-only | current | The value of this object is the actual clock time when the current state information in cadIfUpChannelSpGroupCurrState is most recently updated. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.2 | NodecadSpMgtRequests | |||
| 1.3.6.1.4.1.4998.1.1.15.4.2.2.1 | ScalarcadSpMgtRequestUpChannelIfIndex | read-write | current | IfIndex of the upstream channel. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.2.2 | ScalarcadSpMgtRequestTriggerIndex | read-write | current | The trigger index used to identify the trigger. A value of 0 indicates no trigger is attempted. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.2.3 | ScalarcadSpMgtRequestNextState | read-write | current | The index used to identify the next state to which the state machine may transition to. |
| 1.3.6.1.4.1.4998.1.1.15.4.2.2.4 | ScalarcadSpMgtRequestSNR | read-write | current | This object is the measured Signal/Noise ratio (in dB) for the upstream channel. This object is applicable when the value in cadSpMgtRequestTriggerIndex define… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.2.5 | ScalarcadSpMgtRequestUFecError | read-write | current | This object is the measured percentage of uncorrectable FEC errors for the upstream channel. This object is applicable when the value in cadSpMgtRequestTrigger… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.2.6 | ScalarcadSpMgtRequestFecError | read-write | current | This object is the measured percentage of FEC errors (uncorrectable plus correctable) for the upstream channel. This object is applicable when the value in cad… |
| 1.3.6.1.4.1.4998.1.1.15.4.2.2.7 | ScalarcadSpMgtRequestCommit | read-write | current | The command to execute the request when set to true(1). The following are reasons for rejecting an SNMP SET to this object: - An operation is commited for a no… |
| 1.3.6.1.4.1.4998.1.1.15.4.3 | NodecadSpMgtConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SpTimeOfDay | OCTET STRING (SIZE (3)) | current | A time-of-day specification in hours:minutes:seconds. field octets contents range 1 1 hour 0..23 2 1 minutes 0..59 3 1 seconds 0..59 |
| SpTriggerDay | INTEGER { sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6), everyday(7) } | current | The trigger day is to specify the reoccurrence of the TOD trigger for a week. The trigger day has the following defined values: 7: every day 0: Sunday 1: Monday 2: Tuesday 3: Wednesday 4: Thursday 5: Friday 6: Saturday |
| SpTriggerType | INTEGER { tod(1), periodic(2), degradation(3), improvement(4) } | current | The trigger is used to manage the state transition in C4 Upstream Spectrum Management State Machine. The trigger has the following defined values: TOD - defined with <Time of Day> and reoccurring day within a week Perio… |
| Unsigned16 | Unsigned32 (0..65535) | current | An unsigned 16 bit integer. |