CADANT-CMTS-UPCHANNEL-MIB
84 objects
Arris C4 Upstram Channel Configuration and Constants
Imported Objects
| CADANT-PRODUCTS-MIB | cadSpectrum |
| CADANT-TC | CardId |
| DOCS-IF-MIB | DocsisUpstreamType |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | -- do not import BITS Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.15.3 | IdentitycadUpchannelMib | Arris C4 Upstram Channel Configuration and Constants | ||
| 1.3.6.1.4.1.4998.1.1.15.3.1 | TablecadIfCmtsModulationTable | not-accessible | current | Describes a modulation profile associated with one or more upstream channels. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1 | RowcadIfCmtsModulationEntry | not-accessible | current | Describes a modulation profile for an Interval Usage Code for one or more upstream channels. Entries in this table are created by the operator. Initial default… |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.1 | ColumncadIfCmtsModIndex | not-accessible | current | An index into the Channel Modulation table representing a group of Interval Usage Codes, all associated with the same channel. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.2 | ColumncadIfCmtsModIntervalUsageCode | not-accessible | current | An index into the Channel Modulation table which, when grouped with other Interval Usage Codes, fully instantiate all modulation sets for a given upstream chan… |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.3 | ColumncadIfCmtsModControl | read-create | current | Controls and reflects the status of rows in this table. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.4 | ColumncadIfCmtsModType | read-create | current | The modulation type used on this channel. Returns other(1) if the modulation type is neither qpsk, qam16, qam8, qam32, qam64 or qam128. Type qam128 is used for… |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.5 | ColumncadIfCmtsModPreambleLen | read-create | current | The preamble length for this modulation profile in bits. Default value is the minimum needed by the implementation at the CMTS for the given modulation profile. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.6 | ColumncadIfCmtsModDifferentialEncoding | read-create | current | Specifies whether or not differential encoding is used on this channel. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.7 | ColumncadIfCmtsModFECErrorCorrection | read-create | current | The number of correctable errored bytes (t) used in forward error correction code. The value of 0 indicates no correction is employed. The number of check byte… |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.8 | ColumncadIfCmtsModFECCodewordLength | read-create | current | The number of data bytes (k) in the forward error correction codeword. This object is not used if cadIfCmtsModFECErrorCorrection is zero. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.9 | ColumncadIfCmtsModScramblerSeed | read-create | current | The 15 bit seed value for the scrambler polynomial. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.10 | ColumncadIfCmtsModMaxBurstSize | read-create | current | The maximum number of mini-slots that can be transmitted during this channel's burst time. Returns zero if the burst length is bounded by the allocation MAP ra… |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.11 | ColumncadIfCmtsModGuardTimeSize | read-create | current | The number of symbol-times which must follow the end of this channel's burst. Default value is the minimum time needed by the implementation for this modulatio… |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.12 | ColumncadIfCmtsModLastCodewordShortened | read-create | current | Indicates if the last FEC codeword is truncated. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.13 | ColumncadIfCmtsModScrambler | read-create | current | Indicates if the scrambler is employed. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.14 | ColumncadIfCmtsModPreambleValueOffset | read-only | current | The preamble value offset for this modulation profile. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.15 | ColumncadIfCmtsModBroadcomUwLength | read-only | current | The WHAT |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.16 | ColumncadIfCmtsModBroadcomUwPattern | read-only | current | The WHAT |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.17 | ColumncadIfCmtsModBroadcomUwDetectionWindow | read-only | current | The WHAT |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.18 | ColumncadIfCmtsModBroadcomUwMismatchThreshold | read-only | current | The WHAT |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.19 | ColumncadIfCmtsModByteInterleaverDepth | read-create | current | ATDMA Byte Interleaver Depth (Ir). This object returns 1 for non ATDMA profiles. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.20 | ColumncadIfCmtsModByteInterleaverBlockSize | read-create | current | ATDMA Byte Interleaver Block size (Br). This object returns zero for non ATDMA profiles |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.21 | ColumncadIfCmtsModPreambleType | read-create | current | Preamble type for DOCSIS 2.0 bursts |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.22 | ColumncadIfCmtsModTcmErrorCorrectionOn | read-create | current | Trellis Code Modulation (TCM) On/Off. This value returns false for non S-CDMA profiles. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.23 | ColumncadIfCmtsModScdmaInterleaverStepSize | read-create | current | S-CDMA Interleaver step size. This value returns zero for non S-CDMA profiles. This object defaults to 1 for S-CDMA profiles. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.24 | ColumncadIfCmtsModScdmaSpreaderEnable | read-create | current | S-CDMA spreader. This value returns false for non S-CDMA profiles. Default value for IUC 3 and 4 is OFF, for all other IUCs it is ON. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.25 | ColumncadIfCmtsModScdmaSubframeCodes | read-create | current | S-CDMA sub-frame size. This value returns zero for non S-CDMA profiles. |
| 1.3.6.1.4.1.4998.1.1.15.3.1.1.26 | ColumncadIfCmtsModChannelType | read-create | current | Describes the modulation channel type for this modulation entry. |
| 1.3.6.1.4.1.4998.1.1.15.3.2 | TablecadIfUpstreamChannelTable | not-accessible | current | This table describes the attributes of attached upstream channels. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1 | RowcadIfUpstreamChannelEntry | not-accessible | current | List of attributes for a single upstream channel. For Docsis 2.0 CMTSs, an entry in this table exists for each ifEntry with an ifType of docsCableUpstreamChann… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.1 | ColumncadIfUpChannelCardNumber | read-only | current | Card Number associated with this Channel. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.2 | ColumncadIfUpChannelId | read-only | current | The CMTS identification of the upstream channel. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.4 | ColumncadIfUpChannelFrequency | read-write | current | The center of the frequency band associated with this upstream channel. This object returns 0 if the frequency is undefined or unknown. Minimum permitted upstr… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.5 | ColumncadIfUpChannelWidth | read-write | current | The bandwidth of this upstream channel. This object returns 0 if the channel width is undefined or unknown. Minimum permitted channel width is 200,000 Hz curre… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.6 | ColumncadIfUpChannelModulationProfile | read-write | current | An entry identical to the cadIfModIndex in the cadIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping o… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.7 | ColumncadIfUpChannelPowerDesired | read-write | current | The CMTS desired receive power level. See Cadant documentation for range limitations due to ChannelWidth. If this CMTS interface does not support control of th… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.8 | ColumncadIfUpChannelSlotSize | read-write | current | The number of 6.25 microsecond ticks in each upstream mini- slot. Returns zero if the value is undefined or unknown. See the associated conformance object for … |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.9 | ColumncadIfUpChannelRangingBackoffStart | read-write | current | The initial random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adap… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.10 | ColumncadIfUpChannelRangingBackoffEnd | read-write | current | The final random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adapti… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.11 | ColumncadIfUpChannelTxBackoffStart | read-write | current | The initial random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptiv… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.12 | ColumncadIfUpChannelTxBackoffEnd | read-write | current | The final random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive … |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.13 | ColumncadIfUpChannelMapSize | read-write | current | The average size of MAPs in 800usec ticks. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.17 | ColumncadIfUpChannelMaxPowerAdjust | read-write | current | Maximum size of the CMTS range response power adjustments in 1/4 dBmV units. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.18 | ColumncadIfUpChannelThresholdPowerOffset | read-write | current | Ranging success threshold for CM power measured. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.19 | ColumncadIfUpChannelZeroPowerAdjust | read-write | current | If TRUE, then do NOT send power adjustments in the ranging responses. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.20 | ColumncadIfUpChannelZeroFreqAdjust | read-write | current | If TRUE, then do NOT send frequency adjustments in the ranging responses. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.21 | ColumncadIfUpChannelZeroTimingAdjust | read-write | current | If TRUE, then do NOT send timing adjustments in the ranging responses. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.22 | ColumncadIfUpChannelPreEqEnable | read-write | current | If true(1), then send back equalizer coefficients to the CMs to help them offset upstream channel noise. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.52 | ColumncadIfUpChannelPCNormAllowedUsage | read-write | current | Maximum percentage of upstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources non-exclusively all… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.53 | ColumncadIfUpChannelPCNormResUsage | read-write | current | Minimum percentage of upstream resources that may be used by non-emergency telephony services. This is also the maximum amount of resources exclusively allocat… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.54 | ColumncadIfUpChannelPCEmerAllowedUsage | read-write | current | Maximum percentage of upstream resources that may be used by emergency telephony services. The default is set from the globals in CadPcMibBase. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.55 | ColumncadIfUpChannelPCEmerResUsage | read-write | current | Minimum percentage of upstream resources that may be used by emergency telephony services. If the value of this object is non-zero, then a portion of the upstr… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.56 | ColumncadIfUpChannelPCTotalAllowedUsage | read-write | current | Maximum percentage of upstream resources that may be used by both normal and emergency telephony services. The default is set from the globals in CadPcMibBase. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.57 | ColumncadIfUpChannelIfIndex | not-accessible | current | IfIndex of this upstream channel. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.58 | ColumncadIfUpChannelScdmaActiveCodes | read-write | current | Applicable for SCDMA channel types only. Number of active codes. Returns zero for Non-SCDMA channel types. Note that legal values from 64..128 MUST be non-prim… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.59 | ColumncadIfUpChannelScdmaCodesPerSlot | read-write | current | Applicable for SCDMA channel types only. The number of SCDMA codes per mini-slot. Returns zero if the value is undefined, unknown or in case of a TDMA or ATDMA… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.60 | ColumncadIfUpChannelScdmaFrameSize | read-write | current | Applicable for SCDMA channel types only. SCDMA Frame size in units of spreading intervals. This value returns zero for non SCDMA Profiles. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.61 | ColumncadIfUpChannelScdmaHoppingSeed | read-write | current | Applicable for SCDMA channel types only. 15 bit seed used for code hopping sequence initialization. Returns zero for non-SCDMA channel types. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.62 | ColumncadIfUpChannelType | read-write | current | Defines the Upstream channel type. Given the channel type, other channel attributes can be checked for value validity at the time of entry creation and update. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.63 | ColumncadIfUpChannelCMKeepSpectralDensity | not-accessible | current | Indicates to the CMs that if is there is a modulation change, whether the CM MUST maintain its current transmit power or its current power spectral density. A … |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.64 | ColumncadIfUpChannelIngressCancellationInterval | read-write | current | The interval at which reserved burst intervals are scheduled for ingress cancellation analysis. A value of zero indicates ingress cancellation is disabled. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.65 | ColumncadIfUpChannelIngressCancellationSize | read-write | current | The number of minislots granted for each reserved burst interval that is scheduled for ingress cancellation analysis. A value of zero indicates the grant size … |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.66 | ColumncadIfUpChannelPCPreemptionAllowed | read-write | current | Indicates whether the system will preempt another session for an emergency call. The default is set from the globals in CadPcMibBase. |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.69 | ColumncadIfUpChannelSpGroupIndex | read-write | current | An entry identical to the cadSpMgtGroupIndex in the cadSpMgtGroupTable that describes the upstream spectrum management group. A value of zero means that upstre… |
| 1.3.6.1.4.1.4998.1.1.15.3.2.1.70 | ColumncadIfUpChannelNumberEqTaps | read-write | current | Contains the number of taps to be used by the upstream receiver's equalizer for non-ranging IUCs. Default value of 24 taps. |
| 1.3.6.1.4.1.4998.1.1.15.3.5 | NodecadUpchannelParams | |||
| 1.3.6.1.4.1.4998.1.1.15.3.5.6 | ScalarcadUpchannelFreqRange | read-write | current | This object is used to configure the C4 CMTS to accept upstream frequency ranges that conform with the EuroDOCSIS specifications (5 MHz to 65 MHz), to the exte… |
| 1.3.6.1.4.1.4998.1.1.15.3.5.7 | ScalarcadUpchannelRtpsPiggybackEnable | read-write | current | Allows piggybacking data requests when RTP bit'4' disabled if set this object to true. |
| 1.3.6.1.4.1.4998.1.1.15.3.5.8 | ScalarcadUpchannelCaCertDropEnable | read-write | current | Prevents storage of newly learned untrusted or invalid certificates if set this object to true. |
| 1.3.6.1.4.1.4998.1.1.15.3.5.9 | ScalarcadUpchannelRangingTimingOffset | read-write | current | This object controls TLV 46.8.2, an offset from the reference channel, to set the Ranging Offset of the burst transmission for the new channel so that bursts a… |
| 1.3.6.1.4.1.4998.1.1.15.3.5.10 | ScalarcadUpchannelRecoverImpairedOnAck | read-write | current | This parameter controls whether and how to attempt to recover an US channel if it is impaired after receipt of a REG-ACK or DBC-ACK. If set to attempt_indefini… |
| 1.3.6.1.4.1.4998.1.1.15.3.5.11 | ScalarcadUpchannelDsaRspSidTlvOverride | read-write | current | When this object is set to true, CMTS will include the SID in Upstream Service Flow TLV 24.3 in a DSA-RSP and not include a SID cluster TLV for a US flow when … |
| 1.3.6.1.4.1.4998.1.1.15.3.6 | TablecadUnicastPollingTable | not-accessible | current | This table contains the polling intervals used by the unicast polling algorithm of the MapMaker. This allows the MapMaker to adjust the polling for a service f… |
| 1.3.6.1.4.1.4998.1.1.15.3.6.1 | RowcadUnicastPollingEntry | not-accessible | current | Matrix of polling intervals used for various flow priorities. |
| 1.3.6.1.4.1.4998.1.1.15.3.6.1.1 | ColumncadUnicastPriority | not-accessible | current | An index repesenting the DOCSIS service flow priority. |
| 1.3.6.1.4.1.4998.1.1.15.3.6.1.2 | ColumncadUnicastSlowPollInterval | read-write | current | The slow poll interval repesents the worst cast latency for the first message when traffic is just starting. Broadcast opportunities should be used to help avo… |
| 1.3.6.1.4.1.4998.1.1.15.3.6.1.3 | ColumncadUnicastFastPollInterval | read-write | current | The fast poll interval represents the polling rate desired while traffic is flowing. A value of 0 disables fast polling |
| 1.3.6.1.4.1.4998.1.1.15.3.6.1.4 | ColumncadUnicastFastPollTimeout | read-write | current | The fast poll timeout represents the amount of time in fast polling before transitioning back to slow polling. This is expected to be used during call setup/te… |
| 1.3.6.1.4.1.4998.1.1.15.3.7 | NodecadUpchannelConformance | |||
| 1.3.6.1.4.1.4998.1.1.15.3.7.1 | NodecadUpchannelCompliances | |||
| 1.3.6.1.4.1.4998.1.1.15.3.7.1.1 | CompliancecadUpchannelCompliance | current | The compliance statement for Arris Upstream channel interfaces. | |
| 1.3.6.1.4.1.4998.1.1.15.3.7.2 | NodecadUpchannelGroups | |||
| 1.3.6.1.4.1.4998.1.1.15.3.7.2.1 | GroupcadUpchannelGroup | current | Group of objects required for implementing upstream channels in the Arris C4. |