CISCO-DOCS-EXT-MIB
301 objects
This is the MIB module for the Cisco specific extension objects of Data Over Cable Service, Radio Frequency interface. There is a standard MIB for Data-Over-Cable Service Interface Specifications (DOCSIS) and in Cisco, it is called DOCS-IF-MIB. Besides the objects in DOCS-IF-MIB, this MIB module contains the extension objects to manage the Cable Modem Termination Systems (CMTS). This MIB module includes objects for the scheduler that supports Quality of Service (QoS) of MCNS/DOCSIS compliant Radio Frequency (RF) interfaces in Cable Modem Termination Systems (CMTS). And the purpose is to let users configure attributes of the schedulers in order to ensure the Quality of Service and fairness for modem requests according to users' business needs. Also this MIB shows various states of the schedulers for users to monitor of the schedulers' current status. This MIB module also includes connection status objects for cable modems and Customer Premise Equipment (CPE) and the purpose is to let users easily get the connection status and manage access group information about cable modems and CPE. This MIB module also includes objects for upstream configuration for automated spectrum management in order to mitigate upstream impairment. This MIB module also includes objects to keep count of the total # of modems, # of registered and # of active modems on the mac interface as well as each upstream. Glossary: BE Best Effort CPE Customer Premise Equipment CM Cable Modem CMTS Cable Modem Termination Systems DMIC Dynamic Message Integrity Check DOCSIS Data Over Cable Service Interface Specifications IE Information Element NIC Network Interface Card QoS Quality of Service RF Radio Frequency RTPS Real-Time Polling Service SFID Service Flow ID SID Service Id TOD Time of the Day UGS Unsolicited Grant Service UGS-AD Unsolicited Grant Service with Activity Detection
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.116 | IdentityciscoDocsExtMIB | This is the MIB module for the Cisco specific extension objects of Data Over Cable Service, Radio Frequency interface. There is a standard MIB for Data-Over-Ca… | ||
| 1.3.6.1.4.1.9.9.116.1 | NodeciscoDocsExtMIBObjects | |||
| 1.3.6.1.4.1.9.9.116.1.1 | NodecdxQosCtrlObjects | |||
| 1.3.6.1.4.1.9.9.116.1.1.1 | TablecdxQosCtrlUpTable | not-accessible | current | For each upstream interface, this table maintains a number of objects related to Quality of Service scheduler which uses these attributes to control cable mode… |
| 1.3.6.1.4.1.9.9.116.1.1.1.1 | RowcdxQosCtrlUpEntry | not-accessible | current | A list of attributes for each upstream MAC scheduler that supports Quality of Service. Entries in this table exist for each ifEntry with ifType of docsCableUps… |
| 1.3.6.1.4.1.9.9.116.1.1.1.1.1 | ColumncdxQosCtrlUpAdmissionCtrl | read-write | current | The admission control status for minimum guaranteed upstream bandwidth scheduling service requests for this upstream. When this object is set to 'true', if the… |
| 1.3.6.1.4.1.9.9.116.1.1.1.1.2 | ColumncdxQosCtrlUpMaxRsvdBWPercent | read-write | current | The percentage of upstream maximum reserved bandwidth to the raw bandwidth if the admission control is enabled on this upstream. For example, if the upstream i… |
| 1.3.6.1.4.1.9.9.116.1.1.1.1.3 | ColumncdxQosCtrlUpAdmissionRejects | read-only | current | The count of cable modem registration requests rejected on this upstream interface due to insufficient reserved bandwidth for serving the cable modems with Uns… |
| 1.3.6.1.4.1.9.9.116.1.1.1.1.4 | ColumncdxQosCtrlUpReservedBW | read-only | current | The current total reserved bandwidth in bits per second of this upstream interface. It is the sum of all cable modems' minimum guaranteed bandwidth in bits per… |
| 1.3.6.1.4.1.9.9.116.1.1.1.1.5 | ColumncdxQosCtrlUpMaxVirtualBW | read-only | current | The maximum virtual bandwidth capacity of this upstream interface if the admission control is enabled. It is the raw bandwidth in bits per second times the per… |
| 1.3.6.1.4.1.9.9.116.1.1.2 | TablecdxQosIfRateLimitTable | not-accessible | current | This table describes the attributes of rate limiting for schedulers in cable upstream and downstream interfaces that support Quality of Service. The rate limit… |
| 1.3.6.1.4.1.9.9.116.1.1.2.1 | RowcdxQosIfRateLimitEntry | not-accessible | current | List of the rate limiting attributes for cable upstream and downstream interfaces schedulers that support Quality of Service. Entries in this table exist for e… |
| 1.3.6.1.4.1.9.9.116.1.1.2.1.1 | ColumncdxQosIfRateLimitAlgm | read-write | current | To ensure fairness, the CMTS will throttle the rate for bandwidth request (upstream)/packet sent (downstream) at which CMTS issues grants(upstream) or allow pa… |
| 1.3.6.1.4.1.9.9.116.1.1.2.1.2 | ColumncdxQosIfRateLimitExpWt | read-write | current | Weight for exponential moving average of loss rate for weighted excess packet discard algorithm to maintain. The higher value of the weight makes the algorithm… |
| 1.3.6.1.4.1.9.9.116.1.1.2.1.3 | ColumncdxQosIfRateLimitShpMaxDelay | read-write | current | The maximum shaping delay in milliseconds. That is, the maximum amount time of buffering the CMTS will allow for any rate exceeded flow. If the max buffering d… |
| 1.3.6.1.4.1.9.9.116.1.1.2.1.4 | ColumncdxQosIfRateLimitShpGranularity | read-write | current | The width in milliseconds of each element in shaping delay queue, that is, the shaping granularity. The shaping granularity is only applied to rate limit algor… |
| 1.3.6.1.4.1.9.9.116.1.1.3 | TablecdxCmtsServiceExtTable | not-accessible | current | The list contains the additional attributes of a single Service ID that provided by docsIfCmtsServiceEntry. |
| 1.3.6.1.4.1.9.9.116.1.1.3.1 | RowcdxCmtsServiceExtEntry | not-accessible | current | Additional objects for docsIfCmtsServiceTable entry including downstream traffic statistics and excess counts against the Quality of Service limits for each Se… |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.1 | ColumncdxIfCmtsServiceOutOctets | read-only | current | The cumulative number of Packet Data octets sent for this Service ID. |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.2 | ColumncdxIfCmtsServiceOutPackets | read-only | current | The cumulative number of Packet data packets sent for this Service ID. |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.3 | ColumncdxQosMaxUpBWExcessRequests | read-only | current | The number of upstream bandwidth requests which exceeds the maximum upstream bandwidth allowed for a service defined in the Quality of Service profile associat… |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.4 | ColumncdxQosMaxDownBWExcessPackets | read-only | current | The number of downstream bandwidth packets which exceeds the maximum downstream bandwidth allowed for a service defined in the Quality of Service profile assoc… |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.5 | ColumncdxIfCmtsServiceHCInOctets | read-only | current | The cumulative number of Packet Data octets received on this Service ID. The count does not include the size of the Cable MAC header. This object is a 64-bit v… |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.6 | ColumncdxIfCmtsServiceHCInPackets | read-only | current | The cumulative number of Packet Data packets received on this Service ID. This object is a 64-bit version of docsIfCmtsServiceInPackets. |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.7 | ColumncdxIfCmtsServiceHCOutOctets | read-only | current | The cumulative number of Packet Data octets sent for this Service ID. This object is a 64-bit version of cdxIfCmtsServiceOutOctets. |
| 1.3.6.1.4.1.9.9.116.1.1.3.1.8 | ColumncdxIfCmtsServiceHCOutPackets | read-only | current | The cumulative number of Packet Data packets sent for this Service ID. This object is a 64-bit version of cdxIfCmtsServiceOutPackets. |
| 1.3.6.1.4.1.9.9.116.1.1.4 | TablecdxUpInfoElemStatsTable | not-accessible | current | The table contains the attributes of a particular Information Element type for each instance of the MAC scheduler. It is indexed by upstream ifIndex. An Entry … |
| 1.3.6.1.4.1.9.9.116.1.1.4.1 | RowcdxUpInfoElemStatsEntry | not-accessible | current | The list of statistics for a type of Information Element(IE) which defines the allowed usage for a range of upstream mini slots. One entry exists for each Info… |
| 1.3.6.1.4.1.9.9.116.1.1.4.1.1 | ColumncdxUpInfoElemStatsNameCode | not-accessible | current | This entry describes the Information Element (IE) type. Enumerations are : reqIE(1) : Request Information Element, The request Information Element provides an … |
| 1.3.6.1.4.1.9.9.116.1.1.4.1.2 | ColumncdxUpInfoElemStatsIEType | read-only | current | The current number of mini-slots used for the Information Element type. The value is only a snapshot since the current number of mini-slots of this IE type cou… |
| 1.3.6.1.4.1.9.9.116.1.2 | NodecdxQosQueueObjects | |||
| 1.3.6.1.4.1.9.9.116.1.2.1 | TablecdxBWQueueTable | not-accessible | current | This table describes the attributes of queues in cable interfaces schedulers that support Quality of Service. |
| 1.3.6.1.4.1.9.9.116.1.2.1.1 | RowcdxBWQueueEntry | not-accessible | current | The list of queue attributes in cable upstream and downstream interfaces schedulers that supports Quality of Service. Entries in this table exist for each ifEn… |
| 1.3.6.1.4.1.9.9.116.1.2.1.1.1 | ColumncdxBWQueueNameCode | not-accessible | current | The name code for the queue. cirQ :CIR queue. The queue is for Committed Information Rate (CIR) type of service which serves Service IDs which have minimum gua… |
| 1.3.6.1.4.1.9.9.116.1.2.1.1.2 | ColumncdxBWQueueOrder | read-only | current | The relative order of this queue to the other queues within the cable interface. The smaller number has higher order. That is, 0 is the highest order and 10 is… |
| 1.3.6.1.4.1.9.9.116.1.2.1.1.3 | ColumncdxBWQueueNumServedBeforeYield | read-only | current | The maximum number of requests/packets the scheduler can serve before yielding to another queue. The value 0 means all requests must be served before yielding … |
| 1.3.6.1.4.1.9.9.116.1.2.1.1.4 | ColumncdxBWQueueType | read-only | current | The queuing type which decides the position of a request/packet within the queue. unknown : queue type unknown. other : not fifo, and not priority. fifo : firs… |
| 1.3.6.1.4.1.9.9.116.1.2.1.1.5 | ColumncdxBWQueueMaxDepth | read-only | current | The maximum number of requests/packets which the queue can support.The range is 0-50 for DOCSIS1.0 and for DOCSIS1.1 it is 0-64. |
| 1.3.6.1.4.1.9.9.116.1.2.1.1.6 | ColumncdxBWQueueDepth | read-only | current | The current number of requests/packets in the queue. The range is 0-50 for DOCSIS1.0 and for DOCSIS1.1 it is 0-64. |
| 1.3.6.1.4.1.9.9.116.1.2.1.1.7 | ColumncdxBWQueueDiscards | read-only | current | The number of requests/packets discarded because of queue overflow (queue depth > queue maximum depth). |
| 1.3.6.1.4.1.9.9.116.1.3 | NodecdxCmtsCmCpeObjects | |||
| 1.3.6.1.4.1.9.9.116.1.3.1 | TablecdxCmCpeTable | not-accessible | current | This table contains information about cable modems (CM) or Customer Premises Equipments (CPE). |
| 1.3.6.1.4.1.9.9.116.1.3.1.1 | RowcdxCmCpeEntry | not-accessible | current | The list contains information for a cable modem (CM) or a Customer Premises Equipment (CPE). An entry exist for each cable modem supported by CMTS and each Cus… |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.1 | ColumncdxCmCpeMacAddress | not-accessible | current | The Mac address to identify a cable modem or a Customer Premises Equipment. |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.2 | ColumncdxCmCpeType | read-only | current | Indicate this entry is for cable modem or Customer Premises Equipment. The enumerations are: cm(1): cable modem cpe(2): Customer Premises Equipment |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.3 | ColumncdxCmCpeIpAddress | read-only | current | Ip address of the cable modem or Customer Premises Equipment. |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.4 | ColumncdxCmCpeIfIndex | read-only | current | The CMTS cable MAC interface index (ifType of docsCableMaclayer(127)) that cable modem or Customer Premises Equipment connects to. Use cdxCmCpeIfIndex and cdxC… |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.5 | ColumncdxCmCpeCmtsServiceId | read-only | current | The cable modem's primary Service ID if the type is cm. The primary Service ID for the CM which the CPE connects if the type is cpe. Use cdxCmCpeIfIndex and cd… |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.6 | ColumncdxCmCpeCmStatusIndex | read-only | current | Pointer to an entry in docsIfCmtsCmStatusTable identifying status of the CM (which the CPE connects to.) |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.7 | ColumncdxCmCpeAccessGroup | read-write | current | ASCII text to identify the Access Group for a CM or CPE. Access Group is to filter the upstream traffic for that CM or CPE. |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.8 | ColumncdxCmCpeResetNow | read-write | current | Setting this object to true(1) causes the device to reset. Reading this object always returns false(2). For cdxCmCpeType value cm(1), CMTS removes the CM from … |
| 1.3.6.1.4.1.9.9.116.1.3.1.1.9 | ColumncdxCmCpeDeleteNow | read-write | current | Setting this object to true(1) causes the CM/CPE to be deleted. Reading this object always returns false(2). For cdxCmCpeType value cm(1), CMTS delete CM from … |
| 1.3.6.1.4.1.9.9.116.1.3.2 | TablecdxCmtsCmStatusExtTable | not-accessible | current | The list contains the additional CM status information. |
| 1.3.6.1.4.1.9.9.116.1.3.2.1 | RowcdxCmtsCmStatusExtEntry | not-accessible | current | Additional objects for docsIfCmtsCmStatusTable entry. |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.1 | ColumncdxCmtsCmStatusValue | read-only | current | Current Cable Modem connectivity state. The object extends states in docsIfCmtsCmStatusValue in more details. The enumerations are: offline(1) : modem consider… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.2 | ColumncdxIfCmtsCmStatusOnlineTimes | read-only | current | The number of times that the modem changes the connectivity state from 'offline' to 'online' over the time period from the modem's first ranging message receiv… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.3 | ColumncdxIfCmtsCmStatusPercentOnline | read-only | current | The percentage of time that the modem stays 'online' over the time period from the modem's first ranging message received by CMTS until now. The value for this… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.4 | ColumncdxIfCmtsCmStatusMinOnlineTime | read-only | current | The minimum period of time the modem stayed 'online' over the time period from the modem's first ranging message received by CMTS until now. The modem is consi… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.5 | ColumncdxIfCmtsCmStatusAvgOnlineTime | read-only | current | The average period of time the modem stayed 'online' over the time period from the modem's first ranging message received by CMTS until now. The modem is consi… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.6 | ColumncdxIfCmtsCmStatusMaxOnlineTime | read-only | current | The maximum period of time the modem stayed 'online' over the time period from the modem's first ranging message received by CMTS until now. The modem is consi… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.7 | ColumncdxIfCmtsCmStatusMinOfflineTime | read-only | current | The minimum period of time modem stayed 'offline' over the time period from the modem's first ranging message received by CMTS until now. The modem is consider… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.8 | ColumncdxIfCmtsCmStatusAvgOfflineTime | read-only | current | The average period of time the modem stayed 'offline' over the time period from the modem's first ranging message received by CMTS until now. The modem is cons… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.9 | ColumncdxIfCmtsCmStatusMaxOfflineTime | read-only | current | The maximum period of time the modem stayed 'offline' over the time period from the modem's first ranging message received by CMTS until now. The modem is cons… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.10 | ColumncdxIfCmtsCmStatusDynSidCount | read-only | current | The number of active dynamic SIDs on this modem. Prior to getting the assigned the Service Flow IDs(SFID) the CM must must complete a number of protocol transa… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.11 | ColumncdxIfCmtsCmStatusAddlInfo | read-only | current | This object indicates additional attributes regarding the CM. 1. noisyPlant indicates that the CM connection is noisy. 2. modemPowerMaxOut indicates that the m… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.12 | ColumncdxIfCmtsCmStatusOnlineTimesNum | read-only | current | The number of times that the modem changes the connectivity state from 'offline' to 'online' over the time period from the modem's first ranging message receiv… |
| 1.3.6.1.4.1.9.9.116.1.3.2.1.13 | ColumncdxIfCmtsCmStatusLastResetTime | read-only | current | The last cable modem connectivity statistics reset time. If the value of this object is '0', then the cable modem connectivity statistics had not been reset. |
| 1.3.6.1.4.1.9.9.116.1.3.3 | TablecdxCmtsMacExtTable | not-accessible | current | This table contains the additions attributes of a CMTS MAC interface that provided by docsIfCmtsMacTable. |
| 1.3.6.1.4.1.9.9.116.1.3.3.1 | RowcdxCmtsMacExtEntry | not-accessible | current | Additional objects for docsIfCmtsMacTable entry including the cable modem notification enable/disable and the interval of cable modem notification sent by the … |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.1 | ColumncdxCmtsCmOnOffTrapEnable | read-write | current | An indication of whether the cdxCmtsCmOnOffNotification is enabled. The default value is false(2). |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.2 | ColumncdxCmtsCmOnOffTrapInterval | read-write | current | The interval for cdxCmtsCmOnOffNotification sent by CMTS for one online/offline state change if cdxCmtsCmOnOffTrapEnable is true. If there are more than one st… |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.3 | ColumncdxCmtsCmDefaultMaxCpes | read-write | current | The default maximum number of permitted CPEs per modem in this cable interface. A modem can override this value by setting the object cdxCmtsCmMaxCpeNumber in … |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.4 | ColumncdxCmtsCmTotal | read-only | current | The total count of cable modems on this cable mac interface since boot. |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.5 | ColumncdxCmtsCmActive | read-only | current | The count of cable modems that are active. Active cable modems are recognized by the cdxCmtsCmStatusValue other than offline(1). |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.6 | ColumncdxCmtsCmRegistered | read-only | current | The count of cable modems that are registered and online on this cable mac interface. Registered cable modems are those with one of the following values. regis… |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.7 | ColumncdxCmtsCmDMICMode | read-write | current | The Dynamic Shared Secret feature can operate in three different modes, depending on what action should be taken for cable modems that fail the CMTS MIC verifi… |
| 1.3.6.1.4.1.9.9.116.1.3.3.1.8 | ColumncdxCmtsCmDMICLockQos | read-write | current | If cdxCmtsCmDMICMode is set to lockingMode(3), this object would contain the restrictive QoS profile number as indicated by docsIfQosProfIndex if set and it wi… |
| 1.3.6.1.4.1.9.9.116.1.3.4 | ScalarcdxCmtsCmChOverTimeExpiration | read-write | current | The time period to expire a CMTS channel override operation. Within the time period, if the CMTS cannot send out a RNG-RSP message with channel override fields… |
| 1.3.6.1.4.1.9.9.116.1.3.5 | TablecdxCmtsCmChOverTable | not-accessible | current | A table of CMTS operation entries to instruct cable modems to move to a new downstream and/or upstream channel. An entry in this table is an operation that has… |
| 1.3.6.1.4.1.9.9.116.1.3.5.1 | RowcdxCmtsCmChOverEntry | not-accessible | current | A CMTS operation entry to instruct a cable modem to move to a new downstream and/or upstream channel. A CMTS operator can use this to initiate an operation in … |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.1 | ColumncdxCmtsCmChOverSerialNumber | not-accessible | current | Object which specifies a unique entry in the table. A management station wishing to initiate a channel override operation should use a pseudo-random value for … |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.2 | ColumncdxCmtsCmChOverMacAddress | read-create | current | The mac address of the cable modem that the CMTS instructs to move to a new downstream and/or upstream channel. This column must be set to a valid Mac address … |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.3 | ColumncdxCmtsCmChOverDownFrequency | read-create | current | The new downstream frequency which the cable modem is instructed to move to. The value 0 is to ask the CMTS not to override the downstream frequency. |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.4 | ColumncdxCmtsCmChOverUpChannelId | read-create | current | The new channel Id which the cable modem is instructed to move to. The value -1 is to ask the CMTS not to override the upstream channel Id. |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.5 | ColumncdxCmtsCmChOverTrapOnCompletion | read-create | current | Specifies whether or not a cdxCmtsCmChOverNotification should be issued on completion of the operation. If such a notification is desired, it is the responsibi… |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.6 | ColumncdxCmtsCmChOverOpInitiatedTime | read-only | current | The value of sysUpTime at which the operation was initiated. Since it is possible to have more than one entry in this table for a cable modem, this object can … |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.7 | ColumncdxCmtsCmChOverState | read-only | current | The status of the specified channel override operation. The enumerations are: messageSent(1): the CMTS has sent a RNG-RSP message with channel override to the … |
| 1.3.6.1.4.1.9.9.116.1.3.5.1.8 | ColumncdxCmtsCmChOverRowStatus | read-create | current | The status of this table entry. This value for cdxCmtsCmChOverMacAddress must be valid Mac address currently in the CMTS in order for the row status to be set … |
| 1.3.6.1.4.1.9.9.116.1.3.6 | TablecdxCmtsCmTable | not-accessible | current | This table contains attributes or configurable parameters for cable modems from a CMTS. |
| 1.3.6.1.4.1.9.9.116.1.3.6.1 | RowcdxCmtsCmEntry | not-accessible | current | The list contains a cable modem's attributes or configurable parameters from a CMTS. |
| 1.3.6.1.4.1.9.9.116.1.3.6.1.1 | ColumncdxCmtsCmMaxCpeNumber | read-write | current | The maximum number of permitted CPEs connecting to the modem. The value -1 means to use the default value of maximum hosts per modem in the CMTS cable interfac… |
| 1.3.6.1.4.1.9.9.116.1.3.6.1.2 | ColumncdxCmtsCmCurrCpeNumber | read-only | current | The current number of CPEs connecting to the modem. The value 0 means no hosts connecting to the modem. |
| 1.3.6.1.4.1.9.9.116.1.3.6.1.3 | ColumncdxCmtsCmQosProfile | read-write | current | The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular modem's primary SID. When trying to change the … |
| 1.3.6.1.4.1.9.9.116.1.3.7 | TablecdxCmtsCmStatusDMICTable | not-accessible | current | This table contains the list of modems which failed the CMTS Dynamic Message Integrity Check (DMIC). The modems are either Marked: The modems failed the DMIC c… |
| 1.3.6.1.4.1.9.9.116.1.3.7.1 | RowcdxCmtsCmStatusDMICEntry | not-accessible | current | Additional DMIC objects for docsIfCmtsCmStatusTable entry. |
| 1.3.6.1.4.1.9.9.116.1.3.7.1.1 | ColumncdxCmtsCmStatusDMICMode | read-only | current | This shows all the cable modems that are online or offline and that had failed the Dynamic CMTS MIC verification check. The state is mentioned as follows: mark… |
| 1.3.6.1.4.1.9.9.116.1.3.7.1.2 | ColumncdxCmtsCmStatusDMICUnLock | read-write | current | When set to TRUE, it forces the cable modems to reinitialize, and the cable modems must re-register with a valid DOCSIS configuration file before being allowed… |
| 1.3.6.1.4.1.9.9.116.1.3.8 | TablecdxCmToCpeTable | not-accessible | current | This table contains information about CPE connects behind cable modem. It will return IP address and IP address type of each CPE connect to a CM. It is not int… |
| 1.3.6.1.4.1.9.9.116.1.3.8.1 | RowcdxCmToCpeEntry | not-accessible | current | Represents an entry in the table. Each entry is created if there is CPE connects to a cable modem. The indices uniquely identify a CPE. It is never the intent … |
| 1.3.6.1.4.1.9.9.116.1.3.8.1.1 | ColumncdxCmToCpeCmMacAddress | not-accessible | current | The MAC address that uniquely identifies a cable modem that CPEs connects to. |
| 1.3.6.1.4.1.9.9.116.1.3.8.1.2 | ColumncdxCmToCpeInetAddressType | read-only | current | The type of Internet address of the cdxCmToCpeInetAddress. |
| 1.3.6.1.4.1.9.9.116.1.3.8.1.3 | ColumncdxCmToCpeInetAddress | read-only | current | This object identifies the address assigned to this CPE. |
| 1.3.6.1.4.1.9.9.116.1.3.9 | TablecdxCpeToCmTable | not-accessible | current | This table contains information about cable modems with CPE connects to. It is not intended to walk the whole table. An application would need to query this ta… |
| 1.3.6.1.4.1.9.9.116.1.3.9.1 | RowcdxCpeToCmEntry | not-accessible | current | An entry in cdxCpeToCmTable. Each entry contains information on the MAC address, IP Address, and status index for the cable modem with a specific CPE connects … |
| 1.3.6.1.4.1.9.9.116.1.3.9.1.1 | ColumncdxCpeToCmCpeMacAddress | not-accessible | current | This object identifies the MAC address of the CPE. |
| 1.3.6.1.4.1.9.9.116.1.3.9.1.2 | ColumncdxCpeToCmMacAddress | read-only | current | This object identifies the MAC address of the cable modem. |
| 1.3.6.1.4.1.9.9.116.1.3.9.1.3 | ColumncdxCpeToCmInetAddressType | read-only | current | The type of Internet address of the cdxCpeToCmInetAddress object. |
| 1.3.6.1.4.1.9.9.116.1.3.9.1.4 | ColumncdxCpeToCmInetAddress | read-only | current | This object identifies the address assigned to this cable modem. |
| 1.3.6.1.4.1.9.9.116.1.3.9.1.5 | ColumncdxCpeToCmStatusIndex | read-only | current | An entry in docsIfCmtsCmStatusTable identifying status index of the cable modem which the CPE connects to. |
| 1.3.6.1.4.1.9.9.116.1.3.10 | TablecdxCpeIpPrefixTable | not-accessible | current | The table contains a list CPE's IP Prefix management information. |
| 1.3.6.1.4.1.9.9.116.1.3.10.1 | RowcdxCpeIpPrefixEntry | not-accessible | current | An entry contains information of CM's MAC, CPE's IP prefix type, CPE's IP prefix address, CPE's IP prefix length and CPE's MAC address. An entry is created if … |
| 1.3.6.1.4.1.9.9.116.1.3.10.1.1 | ColumncdxCpeIpPrefixCmMacAddress | not-accessible | current | This object indicates the MAC address of the cable modem. |
| 1.3.6.1.4.1.9.9.116.1.3.10.1.2 | ColumncdxCpeIpPrefixType | not-accessible | current | This object indicates the IP prefix type of the CPE. This is the type of cdxCpeIpPrefixAddress object. |
| 1.3.6.1.4.1.9.9.116.1.3.10.1.3 | ColumncdxCpeIpPrefixAddress | not-accessible | current | This object indicates the IP prefix address. The type of this address is determined by the value of cdxCpeIpPrefixType object. |
| 1.3.6.1.4.1.9.9.116.1.3.10.1.4 | ColumncdxCpeIpPrefixLen | not-accessible | current | This object indicates the IP prefix length of the CPE. This is the length of cdxCpeIpPrefixAddress object. |
| 1.3.6.1.4.1.9.9.116.1.3.10.1.5 | ColumncdxCpeIpPrefixCpeMacAddress | read-only | current | This object indicates the MAC address of CPE. |
| 1.3.6.1.4.1.9.9.116.1.3.10.1.6 | ColumncdxCpeIpPrefixCpeType | read-only | current | This object indicates the type of CPE. Device Type: B - CM Bridge, R - CM Router IP Assignment Method: D - DHCP the format looks like 'R/D'. |
| 1.3.6.1.4.1.9.9.116.1.4 | NodecdxSpecMgmtObjects | |||
| 1.3.6.1.4.1.9.9.116.1.4.1 | TablecdxIfUpstreamChannelExtTable | not-accessible | current | This table contains upstream channel attributes for automated Spectrum management, in addition to the ones provided by docsIfUpstreamChannelEntry. It also cont… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1 | RowcdxIfUpstreamChannelExtEntry | not-accessible | current | Additional objects for docsIfUpstreamChannelEntry,including the secondary upstream channel modulation profile,the lower bound for the channel width and the num… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.1 | ColumncdxIfUpChannelWidth | read-write | current | The lower bound for the bandwidth of this upstream channel. The bandwidth specified by docsIfUpChannelWidth is used as the upper bound of the upstream channel.… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.2 | ColumncdxIfUpChannelModulationProfile | read-write | current | The secondary modulation profile for the upstream channel. This should be a QPSK modulation profile if the primary profile is QAM-16. The CMTS will switch from… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.3 | ColumncdxIfUpChannelCmTotal | read-only | current | The total count of cable modems on this upstream channel since boot. |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.4 | ColumncdxIfUpChannelCmActive | read-only | current | The count of cable modems that are active.Active cable modems are recognized by the cdxCmtsCmStatusValue other than offline(1). |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.5 | ColumncdxIfUpChannelCmRegistered | read-only | current | The count of cable modems that are registered and online on this upstream. Registered cable modems are those with one of the following values: registrationComp… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.6 | ColumncdxIfUpChannelInputPowerLevel | read-write | current | The Upstream Input power level at the CMTS interface. This is the expected power level and is different from the actual power received. If not configured the d… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.7 | ColumncdxIfUpChannelAvgUtil | read-only | current | The average percentage of upstream channel utilization. This item indicates the running average of percent channel utilization in CMTS upstream Mac scheduler. |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.8 | ColumncdxIfUpChannelAvgContSlots | read-only | current | The average percentage of contention mini-slots. This item indicates the running average of percent contention mini-slots in CMTS upstream Mac scheduler. |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.9 | ColumncdxIfUpChannelRangeSlots | read-only | current | The average percentage of initial ranging mini-slots. This item indicates the running average of percent initial ranging mini-slots in CMTS upstream Mac schedu… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.10 | ColumncdxIfUpChannelNumActiveUGS | read-only | current | This object indicates the number of active Unsolicited Grant Service (UGS) on a given upstream. This would be used for the user to evaluate traffic load at any… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.11 | ColumncdxIfUpChannelMaxUGSLastOneHour | read-only | current | This object indicates the maximum number of Unsolicited Grant Service (UGS) allocated on a given upstream in the last one hour. This would be used for the user… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.12 | ColumncdxIfUpChannelMinUGSLastOneHour | read-only | current | This object indicates the minimum number of Unsolicited Grant Service (UGS) allocated on a given upstream in the last one hour. This would be used for the user… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.13 | ColumncdxIfUpChannelAvgUGSLastOneHour | read-only | current | This object indicates the average number of Unsolicited Grant Service (UGS) allocated on a given upstream in the last one hour. This would be used for the user… |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.14 | ColumncdxIfUpChannelMaxUGSLastFiveMins | read-only | current | This object indicates the maximum number of Unsolicited Grant Service (UGS) allocated on a given upstream in the last five minutes. This would be used for the … |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.15 | ColumncdxIfUpChannelMinUGSLastFiveMins | read-only | current | This object indicates the minimum number of Unsolicited Grant Service (UGS) allocated on a given upstream in the last five minutes. This would be used for the … |
| 1.3.6.1.4.1.9.9.116.1.4.1.1.16 | ColumncdxIfUpChannelAvgUGSLastFiveMins | read-only | current | This object indicates the average number of Unsolicited Grant Service (UGS) allocated on a given upstream in the last five minutes. This would be used for the … |
| 1.3.6.1.4.1.9.9.116.1.5 | NodecdxWBResilObjects | |||
| 1.3.6.1.4.1.9.9.116.1.5.1 | ScalarcdxWBResilRFChangeDampenTime | read-write | current | This object specifies the amount of time an RF channel must remain in its new state, either UP or DOWN, before the transition is considered valid. This value a… |
| 1.3.6.1.4.1.9.9.116.1.5.2 | ScalarcdxWBResilRFChangeTriggerPercentage | read-write | current | This object specifies the percentage of cable modems (CMs) that must report that a particular Non Primary RF channel is DOWN, before that channel is removed fr… |
| 1.3.6.1.4.1.9.9.116.1.5.3 | ScalarcdxWBResilRFChangeTriggerCount | read-write | current | This object specifies the count of cable modems (CMs) that must report that a particular Non Primary RF channel is DOWN, before that channel is removed from an… |
| 1.3.6.1.4.1.9.9.116.1.5.4 | ScalarcdxWBResilRFChangeTriggerMoveSecondary | read-write | current | This object specifies whether the secondary service flows are allowed to be moved and created on the narrowband interface. |
| 1.3.6.1.4.1.9.9.116.1.5.5 | ScalarcdxWBResilNotificationEnable | read-write | current | An indication of whether the cdxWBResilRFDown, cdxWBResilRFUp, cdxWBResilCMPartialServiceNotif, cdxWBResilCMFullServiceNotif, cdxWBResilEvent, cdxWBResilUsFull… |
| 1.3.6.1.4.1.9.9.116.1.5.6 | ScalarcdxWBResilNotificationsInterval | read-write | current | This object specifies the interval that cdxWBResilEvent traps could be sent per cable modem. It is to avoid too many cdxWBResilEvent traps sent for a cable mod… |
| 1.3.6.1.4.1.9.9.116.1.5.7 | ScalarcdxWBResilEventLevel | accessible-for-notify | current | This object indicates the priority level of the event. |
| 1.3.6.1.4.1.9.9.116.1.5.8 | ScalarcdxWBResilEventType | accessible-for-notify | current | This object indicates the type of the event received by CMTS. |
| 1.3.6.1.4.1.9.9.116.1.5.9 | ScalarcdxWBResilUpdateTime | accessible-for-notify | current | This object indicates the time when CMTS receives the latest wideband resiliency event. |
| 1.3.6.1.4.1.9.9.116.1.5.10 | ScalarcdxWBResilEventTotalCount | accessible-for-notify | current | The object denotes the count of event CMTS received. |
| 1.3.6.1.4.1.9.9.116.1.5.11 | ScalarcdxWBResilEventTotalDupCount | accessible-for-notify | current | The object denotes the duplicate count of event CMTS received. |
| 1.3.6.1.4.1.9.9.116.1.5.12 | ScalarcdxUsResilEventType | accessible-for-notify | current | The object denotes the type of upstream partial service event. |
| 1.3.6.1.4.1.9.9.116.1.5.13 | TablecdxWBResilCmTable | not-accessible | current | This table contains information regarding the channel list in the CMTS assigned bonding group a cable modem is assigned to use. When a modem is operating in pa… |
| 1.3.6.1.4.1.9.9.116.1.5.13.1 | RowcdxWBResilCmEntry | not-accessible | current | The list contains information for a cable modem(CM). Provided the following information for a cable modem: How many downstream channels in total; How many upst… |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.1 | ColumncdxWBResilCmIndex | not-accessible | current | This attribute uniquely identifies a CM. The CMTS must assign a single id value for each CM MAC address seen by the CMTS. The CMTS should ensure that the assoc… |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.2 | ColumncdxWBResilCmMacAddr | read-only | current | This attribute represents the MAC address of the CM. If the CM has multiple MAC addresses, this is the MAC address associated with the MAC Domain interface. |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.3 | ColumncdxWBResilCmTotalDsNum | read-only | current | Total downstream channel number of the CM. |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.4 | ColumncdxWBResilCmTotalUsNum | read-only | current | Total upstream channel number of the CM. |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.5 | ColumncdxWBResilCmCurrentDsNum | read-only | current | Current active downstream channel number, it's the total downstream channel minus downstream partial service channel number. |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.6 | ColumncdxWBResilCmCurrentUsNum | read-only | current | Current active upstream channel number, it's the total upstream channel minus upstream partial service channel number. |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.7 | ColumncdxWBResilCmImpairedDsChIndex | read-only | current | Impaired downstream channel index list. The index in list is rf channel ifIndex. If there's no downstream channel impaired, return empty. The output looks like… |
| 1.3.6.1.4.1.9.9.116.1.5.13.1.8 | ColumncdxWBResilCmImpairedUsChIndex | read-only | current | Impaired upstream channel index list. The index in list is upstream channel ifIndex. If there's no upstream channel impaired, return empty. The output looks li… |
| 1.3.6.1.4.1.9.9.116.1.6 | NodecdxDownstreamObjects | |||
| 1.3.6.1.4.1.9.9.116.1.6.1 | TablecdxRFtoPrimaryChannelMappingTable | not-accessible | current | This table contains information of the mapping of the physical RF channels to the primary RF channels. |
| 1.3.6.1.4.1.9.9.116.1.6.1.1 | RowcdxRFtoPrimaryChannelMappingEntry | not-accessible | current | An Entry provides the association between the physical RF channels and the primary RF Channels. |
| 1.3.6.1.4.1.9.9.116.1.6.1.1.1 | ColumncdxPrimaryChannelIfIndex | read-only | current | The ifIndex of the primary channel interface. |
| 1.3.6.1.4.1.9.9.116.1.6.2 | TablecdxPrimaryChanneltoRFMappingTable | not-accessible | current | This table contains information of the mapping of the primary RF channels to the physical RF channels. |
| 1.3.6.1.4.1.9.9.116.1.6.2.1 | RowcdxPrimaryChanneltoRFMappingEntry | not-accessible | current | An Entry provides the association between the primary RF channels and the physical RF Channels. |
| 1.3.6.1.4.1.9.9.116.1.6.2.1.1 | ColumncdxPhysicalRFIfIndex | read-only | current | The ifIndex of the physical RF channel interface. |
| 1.3.6.1.4.1.9.9.116.1.7 | NodecdxCmtsMtcCmSfObjects | |||
| 1.3.6.1.4.1.9.9.116.1.7.1 | TablecdxCmtsMtcCmTable | not-accessible | current | This table contains CM management information of Transmit Channel Set(TCS) in the system. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1 | RowcdxCmtsMtcCmEntry | not-accessible | current | An entry provides the CM statistics and management information of a specific TCS. The interface populated in this table is of ifType = docsCableMaclayer(127). |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.1 | ColumncdxCmtsMtcTcsId | not-accessible | current | This object indicates the Id of the Transmit Channel Set. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.2 | ColumncdxCmtsMtcCmTotal | read-only | current | This object indicates the total number of cable modems which use this TCS in the MAC domain. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.3 | ColumncdxCMtsMtcCmOperational | read-only | current | This object indicates the number of operational cable modems which uses this TCS in the MAC domain. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.4 | ColumncdxCmtsMtcCmRegistered | read-only | current | This object indicates the number of registered cable modems which use this TCS in the MAC domain. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.5 | ColumncdxCmtsMtcCmUnregistered | read-only | current | This object indicates the number of unregistered cable modem which use this TCS in the MAC domain. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.6 | ColumncdxCmtsMtcCmOffline | read-only | current | This object indicates the number of offline cable modems which uses this TCS in the MAC domain. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.7 | ColumncdxCmtsMtcCmWideband | read-only | current | This object indicates the number of operational cable modems which are in wideband state and use this TCS in the MAC domain. |
| 1.3.6.1.4.1.9.9.116.1.7.1.1.8 | ColumncdxCmtsMtcUpstreamBondGrp | read-only | current | This object specifies the upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2 | TablecdxCmtsUscbSflowTable | not-accessible | current | This table contains the Upstream Channel Bonding Service Flow management information. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1 | RowcdxCmtsUscbSflowEntry | not-accessible | current | A entry contains the Service Flow statistics for a specific Upstream Channel Bonding group. The interface populated in this table is of ifType = docsCableMacla… |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.1 | ColumncdxCmtsUsBondingGrpId | not-accessible | current | This object indicates upstream bonding group identifier within the MAC Domain. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.2 | ColumncdxCmtsUscbSfTotal | read-only | current | This object indicates the total number of service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.3 | ColumncdxCmtsUscbSfPri | read-only | current | This object indicates the total number of primary service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.4 | ColumncdxCmtsUscbStaticSfBe | read-only | current | This object indicates the number of static BE service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.5 | ColumncdxCmtsUscbStaticSfUgs | read-only | current | This object indicates the number of static UGS service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.6 | ColumncdxCmtsUscbStaticSfUgsad | read-only | current | This object indicates the number of static UGS-AD service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.7 | ColumncdxCmtsUscbStaticSfRtps | read-only | current | This object indicates the number of static RTPS service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.8 | ColumncdxCmtsUscbStaticSfNrtps | read-only | current | This object indicates the number of static NRTPS service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.9 | ColumncdxCmtsUscbDynSfBe | read-only | current | This object indicates the number of dynamic BE service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.10 | ColumncdxCmtsUscbDynSfUgs | read-only | current | This object indicates the number of dynamic UGS service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.11 | ColumncdxCmtsUscbDynSfUgsad | read-only | current | This object indicates the number of dynamic UGS-Ad service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.12 | ColumncdxCmtsUscbDynSfRtps | read-only | current | This object indicates the number of dynamic RTPS service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.13 | ColumncdxCmtsUscbDynSfNrtps | read-only | current | This object indicates the number of dynamic NRTPS service flows which use this upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.7.2.1.14 | ColumncdxCmtsUscbDescr | read-write | current | This object indicates the description of upstream channel bonding group. |
| 1.3.6.1.4.1.9.9.116.1.8 | NodecdxCmtsDocsisLBObjects | |||
| 1.3.6.1.4.1.9.9.116.1.8.1 | ScalarcdxCmtsDocsisLBEnable | read-write | current | This is a cisco private object. Setting this object to true(1) enables d2.0 loadbalancing on CMTS and allows user to further config other options for d3.0 load… |
| 1.3.6.1.4.1.9.9.116.1.8.2 | ScalarcdxCmtsD30LBEnable | read-write | current | Setting this object to true(1) enables d3.0 static loadbalancing on CMTS and allows user to further config other objects for d3.0 loadbalancing(cdxCmtsD30LBUps… |
| 1.3.6.1.4.1.9.9.116.1.8.3 | ScalarcdxCmtsD30LBUpstreamEnable | read-write | current | Setting this object to true(1) enables upstream loadbalancing in docsis 3.0 static loadbalancing. Default is false(2).Only if docsis-enable and docsis30-enable… |
| 1.3.6.1.4.1.9.9.116.1.8.4 | ScalarcdxCmtsD30LBStaticEnable | read-write | current | Setting this to true(1) enables autonomous D30 LB to move wideband modems if LB group is not in a balancing state.Default is false(2). Only if docsis-enable an… |
| 1.3.6.1.4.1.9.9.116.1.8.5 | ScalarcdxCmtsD30LBDynEnable | read-write | current | Setting this to true(1) enables autonomous D30 LB to move wideband modems if LB group is not in a balancing state.Default is false(2). Only if docsis-enable an… |
| 1.3.6.1.4.1.9.9.116.1.9 | NodecdxRPDGS7KObjects | |||
| 1.3.6.1.4.1.9.9.116.1.9.1 | TablecdxRPDGS7KTable | not-accessible | current | The cdxRPDGS7KTable contains the attributes of GS7K. An Entry exists for each instance. It is indexed by GS7K's MacAddress. |
| 1.3.6.1.4.1.9.9.116.1.9.1.1 | RowcdxRPDGS7KEntry | not-accessible | current | The list of statistics for all the sensor, such as volatage, the state of TriSwitch. |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.1 | ColumncdxRPDGS7KMacAddress | read-only | current | This is MacAddress of RPDGS7K which is used for index |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.2 | ColumncdxRPDGS7KPS1p24v | read-only | current | This is the Object of RPDGS7KPS1p24v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.3 | ColumncdxRPDGS7KPS1p8v | read-only | current | This is the Object of RPDGS7KPS1p8v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.4 | ColumncdxRPDGS7KPS1p5v | read-only | current | This is the Object of RPDGS7KPS1p5v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.5 | ColumncdxRPDGS7KPS1n6v | read-only | current | This is the Object of RPDGS7KPS1n6v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.6 | ColumncdxRPDGS7KPS1AC | read-only | current | This is the Object of RPDGS7KPS1AC |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.7 | ColumncdxRPDGS7KPS2p24v | read-only | current | RPDGS7KPS2p24v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.8 | ColumncdxRPDGS7KPS2p8v | read-only | current | This is the Object of RPDGS7KPS2p8v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.9 | ColumncdxRPDGS7KPS2p5v | read-only | current | This is the Object of RPDGS7KPS2p5v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.10 | ColumncdxRPDGS7KPS2n6v | read-only | current | This is the Object of RPDGS7KPS2n6v |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.11 | ColumncdxRPDGS7KPS2AC | read-only | current | This is the Object of RPDGS7KPS2AC |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.12 | ColumncdxRPDGS7KTx1OptPower | read-only | current | This is the Object of RPDGS7K Tx4 Opt Power |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.13 | ColumncdxRPDGS7KRx1OptPower | read-only | current | This is the Object of RPDGS7K Rx4 Opt Power |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.14 | ColumncdxRPDGS7KTriSwitch | read-write | current | This is the Object of RPDGS7K TriSwitch, The relationship which the number indicates is low(1) for -6dB high(2) for 0dB pad(3) for off |
| 1.3.6.1.4.1.9.9.116.1.9.1.1.15 | ColumncdxRPDGS7KTamp | read-only | current | This is the Object of RPDGS7K Tamp |
| 1.3.6.1.4.1.9.9.116.1.10 | NodecdxCmtsDHCPRelayObjects | |||
| 1.3.6.1.4.1.9.9.116.1.10.1 | TablecdxBundleIpHelperTable | not-accessible | current | A list of cable helper entries on Bundle/Sub-Bundle interface. |
| 1.3.6.1.4.1.9.9.116.1.10.1.1 | RowcdxBundleIpHelperEntry | not-accessible | current | The conceptual row of cdxBundleIpHelperEntry. An instance exists for Cable Bundle/Sub-Bundle Interface. |
| 1.3.6.1.4.1.9.9.116.1.10.1.1.1 | ColumncdxBundleHelperAddr | not-accessible | current | Cable helper IP address |
| 1.3.6.1.4.1.9.9.116.1.10.1.1.2 | ColumncdxBundleHelperType | read-only | current | This object describes which kind of device will be associated to a cable helper. The entity may support more than one device class. For example, the entity sup… |
| 1.3.6.1.4.1.9.9.116.1.11 | NodecdxCmtsIPv6DHCPRelayObjects | |||
| 1.3.6.1.4.1.9.9.116.1.11.1 | TablecdxBundleIPv6DHCPRelayTable | not-accessible | current | Ipv6 dhcp relay configurations on Bundle/Sub-Bundle interface. |
| 1.3.6.1.4.1.9.9.116.1.11.1.1 | RowcdxBundleIPv6DHCPRelayEntry | not-accessible | current | The conceptual row of cdxBundleIPv6DHCPRelayTable. An instance exist for the Bundle/Sub-Bundle interface. |
| 1.3.6.1.4.1.9.9.116.1.11.1.1.1 | ColumncdxBundleIPv6DHCPRelayInsertVSSOption | read-only | current | Insert VSS option in Relay-Forward Messages |
| 1.3.6.1.4.1.9.9.116.1.11.1.1.2 | ColumncdxBundleIPv6DHCPRelayTrustToRelayReply | read-only | current | Interface is trusted to process relay-replies |
| 1.3.6.1.4.1.9.9.116.1.11.1.1.3 | ColumncdxBundleIPv6DHDPRelaySourceIfname | read-only | current | Source interface name for IPv6 DHCP relayed messages |
| 1.3.6.1.4.1.9.9.116.1.11.2 | TablecdxBundleIPv6DHCPRelayDestTable | not-accessible | current | A list of IPv6 DHCP relay destination entries on Cable Bundle/Sub-Bundle interfaces. |
| 1.3.6.1.4.1.9.9.116.1.11.2.1 | RowcdxBundleIPv6DHCPRelayDestEntry | not-accessible | current | The conceptual row of cdxBundleIPv6DHCPRelayDestTable. An instance exists for the Cable Bundle/Sub-Bundle interface. |
| 1.3.6.1.4.1.9.9.116.1.11.2.1.1 | ColumncdxBundleIPv6DHCPRelayDestOutIfVrfIndex | not-accessible | current | The vrf identifier that the cdxBundleIPv6DHCPRelayDestOutIfIndex belongs to, it is assigned to each VRF and is used to uniquely identify it, if it is zero, mea… |
| 1.3.6.1.4.1.9.9.116.1.11.2.1.2 | ColumncdxBundleIPv6DHCPRelayDestAddr | not-accessible | current | IPv6 DHCP relay destination address |
| 1.3.6.1.4.1.9.9.116.1.11.2.1.3 | ColumncdxBundleIPv6DHCPRelayDestOutIfIndex | not-accessible | current | The snmp ifIndex of the IPv6 DHCP relay destination output interface. If the ifIndex is 0, it means there is no output interface specified |
| 1.3.6.1.4.1.9.9.116.1.11.2.1.4 | ColumncdxBundleIPv6DHCPRelayDestSourceAddress | read-only | current | IPv6 DHCP relay destination source address |
| 1.3.6.1.4.1.9.9.116.1.11.2.1.5 | ColumncdxBundleIPv6DHCPRelayDestLinkAddress | read-only | current | IPv6 DHCP relay destination link address |
| 1.3.6.1.4.1.9.9.116.1.12 | NodecdxCmtsCmNotificationObjects | |||
| 1.3.6.1.4.1.9.9.116.1.12.1 | ScalarcdxCmtsCmFiberNodeId | accessible-for-notify | current | Fiber node id the modem registered in. For Narrow band modems which have no, fiber node ID configured, return 0. |
| 1.3.6.1.4.1.9.9.116.1.12.2 | ScalarcdxCmtsCmRpdMacAddress | accessible-for-notify | current | The Mac address of the RPD the modem belongs to. For modems on Integrated CMTS, return empty string. |
| 1.3.6.1.4.1.9.9.116.1.12.3 | ScalarcdxCmtsCmRpdName | accessible-for-notify | current | The name/alias of the RPD the modem belongs to. For modems on Integrated CMTS, return empty string. |
| 1.3.6.1.4.1.9.9.116.1.12.4 | ScalarcdxCmtsCmRpdUpstreamPort | accessible-for-notify | current | RPD Upstream port number the modem registered. For modems on Integrated CMTS, return 65535. |
| 1.3.6.1.4.1.9.9.116.1.12.5 | ScalarcdxCmtsCmRpdDownstreamPort | accessible-for-notify | current | RPD downstream port number the modem registered. For modems on Integrated CMTS, return 65535. |
| 1.3.6.1.4.1.9.9.116.1.12.6 | ScalarcdxCmtsCmRegistrationTime | accessible-for-notify | current | The time when the modem registered. |
| 1.3.6.1.4.1.9.9.116.2 | NodeciscoDocsExtNotificationsPrefix | |||
| 1.3.6.1.4.1.9.9.116.2.0 | NodeciscoDocsExtNotifications | |||
| 1.3.6.1.4.1.9.9.116.2.0.1 | NotificationcdxCmtsCmOnOffNotification | current | This notification indicates that the cable modem coming online and going offline. A notification will be sent from CMTS for a cable modem status changing to on… | |
| 1.3.6.1.4.1.9.9.116.2.0.2 | NotificationcdxCmtsCmChOverNotification | current | This notification is sent at the completion of a CMTS channel override operation if cdxCmtsCmChOverTrapOnCompletion is true in the original entry. Once a chann… | |
| 1.3.6.1.4.1.9.9.116.2.0.3 | NotificationcdxCmtsCmDMICLockNotification | current | This notification is sent whenever a modem is locked because it failed the Dynamic Message Integrity Check. | |
| 1.3.6.1.4.1.9.9.116.2.0.4 | NotificationcdxWBResilRFDown | current | This notification indicates that a RF channel changed state to logical DOWN state. | |
| 1.3.6.1.4.1.9.9.116.2.0.5 | NotificationcdxWBResilRFUp | current | This notification indicates that a RF channel changed state to logical UP state. | |
| 1.3.6.1.4.1.9.9.116.2.0.6 | NotificationcdxWBResilCMPartialServiceNotif | current | This notification indicates that a Cable Modem is in partial service. Object docsIfCmtsCmStatusDownChannelIfIndex represents the target wideband/narrowband ifi… | |
| 1.3.6.1.4.1.9.9.116.2.0.7 | NotificationcdxWBResilCMFullServiceNotif | current | This notification indicates that a Cable Modem is recovered from partial service. Object docsIfCmtsCmStatusDownChannelIfIndex represents the target wideband/na… | |
| 1.3.6.1.4.1.9.9.116.2.0.8 | NotificationcdxWBResilEvent | current | This notification indicates that a wideband resiliency event is received by CMTS. | |
| 1.3.6.1.4.1.9.9.116.2.0.9 | NotificationcdxWBResilUsPartialServiceNotif | current | This notification indicates that a Cable Modem is inenters upstream partial service. Object docsIfCmtsCmStatusUpChannelIfIndex represents the target upstream c… | |
| 1.3.6.1.4.1.9.9.116.2.0.10 | NotificationcdxWBResilUsFullServiceNotif | current | This notification indicates that a Cable Modem upstream channel is recovered from upstream partial service to full service mode. Object docsIfCmtsCmStatusUpCha… | |
| 1.3.6.1.4.1.9.9.116.3 | NodeciscoDocsExtConformance | |||
| 1.3.6.1.4.1.9.9.116.3.1 | NodecdxDocsExtCompliances | |||
| 1.3.6.1.4.1.9.9.116.3.1.1 | CompliancecdxDocsExtCompliance | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.2 | CompliancecdxDocsExtComplianceRev1 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.3 | CompliancecdxDocsExtComplianceRev2 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.4 | CompliancecdxDocsExtComplianceRev3 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.5 | CompliancecdxDocsExtComplianceRev4 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.6 | CompliancecdxDocsExtComplianceRev5 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.7 | CompliancecdxDocsExtComplianceRev6 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.8 | CompliancecdxDocsExtComplianceRev7 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.9 | CompliancecdxDocsExtComplianceRev8 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.10 | CompliancecdxDocsExtComplianceRev9 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.11 | CompliancecdxDocsExtComplianceRev10 | read-only | obsolete | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.12 | CompliancecdxDocsExtComplianceRev11 | read-only | deprecated | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.13 | CompliancecdxDocsExtComplianceRev12 | read-only | current | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. |
| 1.3.6.1.4.1.9.9.116.3.1.14 | CompliancecdxDocsExtComplianceRev13 | current | The compliance statement for devices that implement MCNS compliant Radio Frequency Interfaces and DOCSIS features. | |
| 1.3.6.1.4.1.9.9.116.3.2 | NodecdxDocsExtGroups | |||
| 1.3.6.1.4.1.9.9.116.3.2.1 | GroupcdxQosCtrlGroup | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) cable interfaces for states of the scheduler supporting Data-Over-Cable Service Interfac… | |
| 1.3.6.1.4.1.9.9.116.3.2.2 | GroupcdxQosQueueGroup | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) cable interfaces for the queuing states of the scheduler supporting Data-Over-Cable Serv… | |
| 1.3.6.1.4.1.9.9.116.3.2.3 | GroupcdxCmtsCmCpeGroup | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.4 | GroupcdxQosCtrlGroupRev1 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) cable interfaces for states of the scheduler supporting Data-Over-Cable Service Interfac… | |
| 1.3.6.1.4.1.9.9.116.3.2.5 | GroupcdxCmtsCmCpeGroupRev1 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.6 | GroupcdxSpecMgmtGroup | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) cable interfaces for automated upstream spectrum management. | |
| 1.3.6.1.4.1.9.9.116.3.2.7 | GroupcdxCmtsCmCpeGroupRev2 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.8 | GroupcdxSpecMgmtGroupRev1 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) cable interfaces for automated upstream spectrum management. | |
| 1.3.6.1.4.1.9.9.116.3.2.9 | GroupcdxCmtsCmCpeGroupRev3 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.10 | GroupcdxQosCtrlGroupRev2 | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) cable interfaces for states of the scheduler supporting Data-Over-Cable Service Interfac… | |
| 1.3.6.1.4.1.9.9.116.3.2.11 | GroupcdxCmtsCmCpeGroupRev4 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.12 | GroupcdxSpecMgmtGroupRev2 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for upstream interfaces. | |
| 1.3.6.1.4.1.9.9.116.3.2.13 | GroupcdxNotifGroup | obsolete | A group of notifications implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.14 | GroupcdxSpecMgmtGroupRev3 | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) for upstream interfaces. | |
| 1.3.6.1.4.1.9.9.116.3.2.15 | GroupcdxCmtsCmCpeGroupRev5 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.16 | GroupcdxCmtsCmCpeGroupRev6 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.17 | GroupcdxCmtsCmCpeGroupRev7 | obsolete | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.18 | GroupcdxCmtsCmCpeGroupRev8 | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.19 | GroupcdxNotifGroupRev1 | current | A group of notifications implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring cable modems or Customer Premises Equipments. | |
| 1.3.6.1.4.1.9.9.116.3.2.20 | GroupcdxCmtsCmCpeDeleteGroup | current | A collection of object(s) to delete Cable Modem(CM) or Customer Premises Equipment(CPE) in CMTS. | |
| 1.3.6.1.4.1.9.9.116.3.2.21 | GroupcdxWBResilGroup | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring Wideband Resiliency information. | |
| 1.3.6.1.4.1.9.9.116.3.2.22 | GroupcdxNotifGroupExt | current | A group of notifications implemented in Cable Modem Termination Systems (CMTS) for managing and monitoring wideband resiliency events. | |
| 1.3.6.1.4.1.9.9.116.3.2.23 | GroupcdxQosCtrlGroupExt | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) cable interfaces for 64bit couters about sending and receiving for the same SID. | |
| 1.3.6.1.4.1.9.9.116.3.2.24 | GroupcdxDownstreamGroup | current | Group of objects implements in Cable Modem Termination System (CMTS for downstream interfaces. | |
| 1.3.6.1.4.1.9.9.116.3.2.25 | GroupcdxCpeIpPrefixGroup | current | A collection of objects providing CM management information of TCS. | |
| 1.3.6.1.4.1.9.9.116.3.2.26 | GroupcdxCmtsMtcCmGroup | current | A collection of objects providing CM management information of TCS. | |
| 1.3.6.1.4.1.9.9.116.3.2.27 | GroupcdxCmtsUscbSflowGroup | current | A collection of objects providing Upstream Channel Bonding Service Flow management information. | |
| 1.3.6.1.4.1.9.9.116.3.2.28 | GroupcdxCmtsDocsisLBGroup | current | A collection of objects providing config of D3.0 Load Balancing Feature. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CdxResettableCounter32 | Gauge32 | current | This TC describes an object which counts events with the following semantics: objects of this type will be set to zero(0) on creation or reset indirectly by other objects or certain event and will thereafter count appro… |
| CdxUpstreamBondGrpList | OCTET STRING (SIZE (0..320)) | current | This data type is a human-readable string that represents the upstream bonding group list within a MAC Domain. When there is no upstream bonding group in a MAC Domain, it will be empty. |