CISCO-DOCS-REMOTE-QUERY-MIB
29 objects
This MIB module provides the management of the Cisco Cable Modem Termination Systems (CMTS) Remote Query feature. This feature, implemented on a CMTS, facilitates SNMP polling of remote cable modems (CMs). This MIB includes the configuration and status objects of the CMTS CM Poller and remote CMs that polled by the CMTS CM Poller
Imported Objects
| CISCO-DOCS-EXT-MIB | cdxCmCpeMacAddress |
| CISCO-SMI | ciscoExperiment |
| DOCS-IF-MIB | TenthdB TenthdBmV |
| SNMP-FRAMEWORK-MIB | SnmpAdminString SnmpEngineID |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.59 | IdentityciscoDocsRemoteQueryMIB | This MIB module provides the management of the Cisco Cable Modem Termination Systems (CMTS) Remote Query feature. This feature, implemented on a CMTS, facilita… | ||
| 1.3.6.1.4.1.9.10.59.1 | NodeciscoDocsRemQueryMIBObjects | |||
| 1.3.6.1.4.1.9.10.59.1.1 | NodecdrqPoller | |||
| 1.3.6.1.4.1.9.10.59.1.1.1 | ScalarcdrqCmtsCmPollerEnable | read-write | current | An indication of whether the CMTS CM Poller is running. When the poller is enabled, it polls the remote CMs periodically specified in the cdrqCmtsCmPollerInter… |
| 1.3.6.1.4.1.9.10.59.1.1.2 | ScalarcdrqCmtsCmPollerInterval | read-write | current | An interval between two polling cycles of the CMTS CM Poller. The poller will not start the next cycle until it finished polling for the last CM , even though … |
| 1.3.6.1.4.1.9.10.59.1.1.3 | ScalarcdrqCmtsCmPollerCommunity | read-write | current | The read community string is used for polling the CMs. Any change in the cdrqCmtsCmPollerCommunity will not be reflected if the poller has already been enabled… |
| 1.3.6.1.4.1.9.10.59.1.1.4 | ScalarcdrqCmtsCmPollerContextEngineID | read-write | current | The contextEngineID indicating the location of the context in which management information is accessed when using the user name specified by the corresponding … |
| 1.3.6.1.4.1.9.10.59.1.1.5 | ScalarcdrqCmtsCmPollerContextName | read-write | current | The context in which management information is accessed when using the user name specified by the corresponding instance of cdrqCmtsCmPollerCommunity. This obj… |
| 1.3.6.1.4.1.9.10.59.1.1.6 | ScalarcdrqCmtsCmPollerStartTime | read-only | current | The value of sysUpTime when the last polling cycle started. cdrqCmtsCmPollerStartTime is set to 0 when the CMTS is first restarted and doesn't get reset after … |
| 1.3.6.1.4.1.9.10.59.1.1.7 | ScalarcdrqCmtsCmPollerStopTime | read-only | current | The value of sysUpTime when the last polling cycle finished. cdrqCmtsCmPollerStopTime is set to 0 when the CMTS is first restarted and doesn't get reset after … |
| 1.3.6.1.4.1.9.10.59.1.2 | NodecdrqCM | |||
| 1.3.6.1.4.1.9.10.59.1.2.1 | TablecdrqCmtsCmStatusTable | not-accessible | current | This table contains the status of the cable modems that are polled by the CMTS CM Poller. The information will be overwritten when a new polling cycle starts. … |
| 1.3.6.1.4.1.9.10.59.1.2.1.1 | RowcdrqCmtsCmStatusEntry | not-accessible | current | A list of the cable modem's attributes that are polled by a CMTS. |
| 1.3.6.1.4.1.9.10.59.1.2.1.1.1 | ColumncdrqCmtsCmDownChannelPower | read-only | current | The CM's received power level. This object may be set to zero if the CM does not support power level measurement. If the CM downstream interface is down, this … |
| 1.3.6.1.4.1.9.10.59.1.2.1.1.2 | ColumncdrqCmtsCmStatusTxPower | read-only | current | The operational transmit power for the CM upstream channel. |
| 1.3.6.1.4.1.9.10.59.1.2.1.1.3 | ColumncdrqCmtsCmUpChnlTxTimingOffset | read-only | current | A measure of the current round trip time. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. |
| 1.3.6.1.4.1.9.10.59.1.2.1.1.4 | ColumncdrqCmtsCmSigQSignalNoise | read-only | current | Signal/Noise ratio as perceived for the CM downstream channel. |
| 1.3.6.1.4.1.9.10.59.1.2.1.1.5 | ColumncdrqCmtsCmSigQMicroreflections | read-only | current | Total microreflections including in-channel response as perceived on the CM downstream, measured in dBc below the signal level. This object is not assumed to r… |
| 1.3.6.1.4.1.9.10.59.1.2.1.1.6 | ColumncdrqCmtsCmPollTime | read-only | current | The value of sysUpTime when this CM entry was polled. If this value is larger than the cdrqCmtsCmPollerStopTime, either by receiving it from the cdrqCmtsCmRQDo… |
| 1.3.6.1.4.1.9.10.59.2 | NodeciscoDocsRQNotificationsPrefix | |||
| 1.3.6.1.4.1.9.10.59.2.0 | NodeciscoDocsRQNotifications | |||
| 1.3.6.1.4.1.9.10.59.2.0.1 | NotificationcdrqCmtsCmRQDoneNotification | current | This notification is sent when CMTS CM Poller finished polling for the current cycle. The cdrqCmtsCmPollerStartTime is the time when the polling cycle started.… | |
| 1.3.6.1.4.1.9.10.59.3 | NodeciscoDocsRemoteQueryConformance | |||
| 1.3.6.1.4.1.9.10.59.3.1 | NodecdrqDocsRemoteQueryCompliances | |||
| 1.3.6.1.4.1.9.10.59.3.1.1 | CompliancecdrqDocsRemoteQueryCompliance | current | The compliance statement for entities which implement the Cisco Remote Query MIB | |
| 1.3.6.1.4.1.9.10.59.3.2 | NodecdrqDocsRemoteQueryGroups | |||
| 1.3.6.1.4.1.9.10.59.3.2.1 | GroupcdrqPollerGroup | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) for configuring and monitoring the CMTS CM Poller. | |
| 1.3.6.1.4.1.9.10.59.3.2.2 | GroupcdrqCMGroup | current | Group of objects implemented in Cable Modem Termination Systems (CMTS) for monitoring cable modems via CMTS CM Poller. | |
| 1.3.6.1.4.1.9.10.59.3.2.3 | GroupcdrqNotificationGroup | current | The notification which a CISCO-DOCS-REMOTE-QUERY-MIB entity may implement. |