MIB Viewer

CISCO-ITP-GSP2-MIB

94 objects
The MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of signalling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set.
OIDNameAccessStatusDescription
1.3.6.1.4.1.9.9.332IdentityciscoGsp2MIBThe MIB for providing information specified in ITU Q752 Monitoring and Measurements for signalling System No. 7(SS7) Network. This information can be used to m…
1.3.6.1.4.1.9.9.332.0NodeciscoGsp2MIBNotifs
1.3.6.1.4.1.9.9.332.1NodeciscoGsp2MIBObjects
1.3.6.1.4.1.9.9.332.1.1Nodecgsp2Events
1.3.6.1.4.1.9.9.332.1.1.1Tablecgsp2EventTablenot-accessiblecurrentA table used to provide information about all types of events on a signalling point.
1.3.6.1.4.1.9.9.332.1.1.1.1Rowcgsp2EventTableEntrynot-accessiblecurrentA table of SS7 events generated and received by a specific signalling point.
1.3.6.1.4.1.9.9.332.1.1.1.1.1Columncgsp2EventTypenot-accessiblecurrentThe type of event history as follows. 'as' - Application Service 'asp' - Application Service Process 'mtp3' - Message Transport Protocol Level 3 'pc' - Point-c…
1.3.6.1.4.1.9.9.332.1.1.1.1.2Columncgsp2EventLoggedEventsread-onlycurrentThe number of events that have been logged.
1.3.6.1.4.1.9.9.332.1.1.1.1.3Columncgsp2EventDroppedEventsread-onlycurrentThe number of events that could not be logged due to unavailable resources.
1.3.6.1.4.1.9.9.332.1.1.1.1.4Columncgsp2EventMaxEntriesread-writecurrentThe upper limit on the number of events that the event history can contain. A value of 0 will prevent any event history from being retained. When this table is…
1.3.6.1.4.1.9.9.332.1.1.1.1.5Columncgsp2EventMaxEntriesAllowedread-onlycurrentThis object specifies the maximum number of events that can be specified for cgsp2EventMaxEntries object.
1.3.6.1.4.1.9.9.332.1.1.2Tablecgsp2EventAsTablenot-accessiblecurrentA table of Application Service events generated per signalling point.
1.3.6.1.4.1.9.9.332.1.1.2.1Rowcgsp2EventAsTableEntrynot-accessiblecurrentAn entry is added to this table for each application service event associated with a particular application service. The table contains the latest number of ev…
1.3.6.1.4.1.9.9.332.1.1.2.1.1Columncgsp2EventAsNamenot-accessiblecurrentThe application server name. This name has only local significance.
1.3.6.1.4.1.9.9.332.1.1.2.1.2Columncgsp2EventAsIndexnot-accessiblecurrentIndex into application service event history.
1.3.6.1.4.1.9.9.332.1.1.2.1.3Columncgsp2EventAsTextread-onlycurrentA brief description of the application service event in text format.
1.3.6.1.4.1.9.9.332.1.1.2.1.4Columncgsp2EventAsTimestampread-onlycurrentThe value of sysUpTime at the time of the application service event was processed.
1.3.6.1.4.1.9.9.332.1.1.3Tablecgsp2EventAspTablenot-accessiblecurrentA table of application service process events generated per signalling point.
1.3.6.1.4.1.9.9.332.1.1.3.1Rowcgsp2EventAspTableEntrynot-accessiblecurrentAn entry is added to this table for each application service process event associated with a particular application service process. The table contains the lat…
1.3.6.1.4.1.9.9.332.1.1.3.1.1Columncgsp2EventAspNamenot-accessiblecurrentThe application server process name. This name has only local significance.
1.3.6.1.4.1.9.9.332.1.1.3.1.2Columncgsp2EventAspIndexnot-accessiblecurrentIndex into application service process event history.
1.3.6.1.4.1.9.9.332.1.1.3.1.3Columncgsp2EventAspTextread-onlycurrentA brief description of the application service process event in text format.
1.3.6.1.4.1.9.9.332.1.1.3.1.4Columncgsp2EventAspTimestampread-onlycurrentThe value of sysUpTime at the time of the application service process event was received.
1.3.6.1.4.1.9.9.332.1.1.4Tablecgsp2EventMtp3Tablenot-accessiblecurrentA table of MTP3 events generated per signalling point.
1.3.6.1.4.1.9.9.332.1.1.4.1Rowcgsp2EventMtp3TableEntrynot-accessiblecurrentAn MTP3 event that was previously generated by this signalling point. An entry is added to this table for each SS7 event generated on the managed system. The t…
1.3.6.1.4.1.9.9.332.1.1.4.1.1Columncgsp2EventMtp3Indexnot-accessiblecurrentIndex into MTP3 event history.
1.3.6.1.4.1.9.9.332.1.1.4.1.2Columncgsp2EventMtp3Textread-onlycurrentA brief description of the SS7 event in text format. Each event provides information of state transitions specific to the MTP3 protocol.
1.3.6.1.4.1.9.9.332.1.1.4.1.3Columncgsp2EventMtp3Timestampread-onlycurrentThe value of sysUpTime at the time of the event was received by MTP3 layer.
1.3.6.1.4.1.9.9.332.1.1.5Tablecgsp2EventPcTablenot-accessiblecurrentA table of point-code events generated per signalling point.
1.3.6.1.4.1.9.9.332.1.1.5.1Rowcgsp2EventPcTableEntrynot-accessiblecurrentAn entry is added to this table for each point-code event. The table contains the latest number of events defined by the cgsp2EventMaxEntries object. Once the …
1.3.6.1.4.1.9.9.332.1.1.5.1.1Columncgsp2EventPcnot-accessiblecurrentThe point code number.
1.3.6.1.4.1.9.9.332.1.1.5.1.2Columncgsp2EventPcIndexnot-accessiblecurrentIndex into point-code event history.
1.3.6.1.4.1.9.9.332.1.1.5.1.3Columncgsp2EventPcTextread-onlycurrentA brief description of the point-code event in text format.
1.3.6.1.4.1.9.9.332.1.1.5.1.4Columncgsp2EventPcTimestampread-onlycurrentThe value of sysUpTime at the time of the point-code event was received.
1.3.6.1.4.1.9.9.332.1.2Nodecgsp2Qos
1.3.6.1.4.1.9.9.332.1.2.1Tablecgsp2QosTablenot-accessiblecurrentA table of information related to the defining Quality of Service to transport SS7 packets using SCTP/IP. Entries are added to this table via cgsp2QosRowStatus…
1.3.6.1.4.1.9.9.332.1.2.1.1Rowcgsp2QosTableEntrynot-accessiblecurrentEach entry define information relate to a Quality of Service class as needed to transport SS7 packets using SCTP/IP.
1.3.6.1.4.1.9.9.332.1.2.1.1.1Columncgsp2QosClassnot-accessiblecurrentThe quality of service class that can be defined to transport SS7 Packets using SCTP/IP.
1.3.6.1.4.1.9.9.332.1.2.1.1.2Columncgsp2QosTyperead-createcurrentEnumerated list of QoS type that can be defined. A value ipPrecedence suggests that IP Type of Service (TOS) is based on cgsp2QosPrecedenceValue. A value ipDsc…
1.3.6.1.4.1.9.9.332.1.2.1.1.3Columncgsp2QosPrecedenceValueread-createcurrentA value to assign to the IP TOS bits in the IP datagram that carries one or more SS7 packets. The IP Precedence value is specified if cgsp2QosType is ipPrecede…
1.3.6.1.4.1.9.9.332.1.2.1.1.4Columncgsp2QosIpDscpread-createcurrentDiffServ CodePoint (DSCP) value to assign to the IP TOS bits in the IP datagram that carries one or more SS7 packets. DSCP provides scalable mechanisms to clas…
1.3.6.1.4.1.9.9.332.1.2.1.1.5Columncgsp2QosAclIdread-createcurrentITP Access lists can be used to use information specific to SS7 packets to assign an Qos class. A value of zero indicates that no access control list is presen…
1.3.6.1.4.1.9.9.332.1.2.1.1.6Columncgsp2QosRowStatusread-createcurrentThe object is used by a management station to create or delete the row entry in cgsp2QosTable following the RowStatus textual convention.
1.3.6.1.4.1.9.9.332.1.3Nodecgsp2LocalPeer
1.3.6.1.4.1.9.9.332.1.3.1Tablecgsp2LocalPeerTablenot-accessiblecurrentA local-peer table used establish SCTP associations. The port will be used to receive and sent requests to establish associations. Entries are added to this ta…
1.3.6.1.4.1.9.9.332.1.3.1.1Rowcgsp2LocalPeerTableEntrynot-accessiblecurrentA list of attributes of the local-peer.
1.3.6.1.4.1.9.9.332.1.3.1.1.1Columncgsp2LocalPeerPortnot-accessiblecurrentThe local SCTP port for this local-peer. The value zero is not allowed.
1.3.6.1.4.1.9.9.332.1.3.1.1.2Columncgsp2LocalPeerSlotNumberread-onlycurrentThis value is used to specify to which slot the local-peer will be offloaded. A value of negative one indicates the local-peer is not offloaded.
1.3.6.1.4.1.9.9.332.1.3.1.1.3Columncgsp2LocalPeerRowStatusread-createcurrentThe object is used by a management station to create or delete a row entry in cgsp2LocalPeerTable following the RowStatus textual convention.
1.3.6.1.4.1.9.9.332.1.3.1.1.4Columncgsp2LocalPeerProcessorNumberread-onlycurrentThis value is used to specify to which processor the local-peer will be offloaded on the line card indicated by cgsp2LocalPeerSlotNumber. For certain line card…
1.3.6.1.4.1.9.9.332.1.3.2Tablecgsp2LpIpAddrTablenot-accessiblecurrentA table of Local IP addresses group together to form the local-peer used to establish SCTP associations. For a given local-peer, there can be multiple local IP…
1.3.6.1.4.1.9.9.332.1.3.2.1Rowcgsp2LpIpAddrTableEntrynot-accessiblecurrentA list of attributes of the Local IP addresses for the local-peer.
1.3.6.1.4.1.9.9.332.1.3.2.1.1Columncgsp2LpIpAddressNumbernot-accessiblecurrentThis object specifies the index for the instance's IP address.
1.3.6.1.4.1.9.9.332.1.3.2.1.2Columncgsp2LpIpAddressTyperead-createcurrentThis object contains the type of the local IP address used to create the association.
1.3.6.1.4.1.9.9.332.1.3.2.1.3Columncgsp2LpIpAddressread-createcurrentThis object contains the local IP address used to create association associations.
1.3.6.1.4.1.9.9.332.1.3.2.1.4Columncgsp2LpIpAddressRowStatusread-createcurrentThe object is used by a management station to create or delete the row entry in cgsp2LpIpAddrTable following the RowStatus textual convention.
1.3.6.1.4.1.9.9.332.1.4Nodecgsp2Mtp3Errors
1.3.6.1.4.1.9.9.332.1.4.1Tablecgsp2Mtp3ErrorsTablenot-accessiblecurrentA table of MTP3 errors that have occurred on all Signalling Point supported by this device.
1.3.6.1.4.1.9.9.332.1.4.1.1Rowcgsp2Mtp3ErrorsTableEntrynot-accessiblecurrentA list of attributes used to provide a summary of the various MTP3 errors encountered by the device.
1.3.6.1.4.1.9.9.332.1.4.1.1.1Columncgsp2Mtp3ErrorsTypenot-accessiblecurrentThis object specifies the index for the various error types.
1.3.6.1.4.1.9.9.332.1.4.1.1.2Columncgsp2Mtp3ErrorsDescriptionread-onlycurrentA brief description of the MTP3 error in text format.
1.3.6.1.4.1.9.9.332.1.4.1.1.3Columncgsp2Mtp3ErrorsCountread-onlycurrentNumber of errors encountered for this type of MTP3 error as described in cgsp2Mtp3ErrorsDescription object.
1.3.6.1.4.1.9.9.332.1.5Nodecgsp2Operation
1.3.6.1.4.1.9.9.332.1.5.1Scalarcgsp2OperMtp3Offloadread-onlycurrentIndicates location of MTP3 management function as follows. 'main' - MTP3 Management function operates only on main processor. 'offload' - MTP3 Management funct…
1.3.6.1.4.1.9.9.332.1.5.2Scalarcgsp2OperRedundancyread-onlycurrentThe redundancy capability of devices for signalling points defined on this device as follows. 'none' - Device is not configured to support redundancy features.…
1.3.6.1.4.1.9.9.332.1.6Nodecgsp2Context
1.3.6.1.4.1.9.9.332.1.6.1Tablecgsp2ContextTablenot-accessiblecurrentDCS(Data Collector Server) use ContextId as index to get additional information about the resource being monitoring. This table provides informations used to i…
1.3.6.1.4.1.9.9.332.1.6.1.1Rowcgsp2ContextEntrynot-accessiblecurrentEach entry (conceptual row) represents a resource(Link or ASP) that can be monitored by the the Probeless Monitor Feature. Each are added to deleted from this …
1.3.6.1.4.1.9.9.332.1.6.1.1.1Columncgsp2ContextIdentifiernot-accessiblecurrentThe unique Id for LINK or ASP to Application
1.3.6.1.4.1.9.9.332.1.6.1.1.2Columncgsp2ContextTyperead-onlycurrentThis object indicate the type of resource Link or ASP.
1.3.6.1.4.1.9.9.332.1.6.1.1.3Columncgsp2ContextLinksetNameread-onlycurrentThe name of the Linkset in which the link is configured and this object only applies when the cgsp2ContextType indicates the resource is a Link.
1.3.6.1.4.1.9.9.332.1.6.1.1.4Columncgsp2ContextSlcread-onlycurrentThe Signalling Link Code for this link.This object only applies when the cgsp2ContextType indicates the resource is an Link.
1.3.6.1.4.1.9.9.332.1.6.1.1.5Columncgsp2ContextAsNameread-onlycurrentThe Aplication server name.This object only applies when the cgsp2ContextType indicates the resource is an ASP.
1.3.6.1.4.1.9.9.332.1.6.1.1.6Columncgsp2ContextAspNameread-onlycurrentThe Application Server Process Name.This object only applies when the cgsp2ContextType indicates the resource is an ASP.
1.3.6.1.4.1.9.9.332.1.6.1.1.7Columncgsp2ContextNetworkNameread-onlycurrentThe Network name configure for the instance in ITP
1.3.6.1.4.1.9.9.332.2NodeciscoGsp2MIBConform
1.3.6.1.4.1.9.9.332.2.1NodeciscoGsp2MIBCompliances
1.3.6.1.4.1.9.9.332.2.1.1ComplianceciscoGsp2MIBComplianceread-onlydeprecatedThe compliance statement for entities which implement the CISCO-ITP-GSP2-MIB.my MIB
1.3.6.1.4.1.9.9.332.2.1.2ComplianceciscoGsp2MIBComplianceRev1read-onlydeprecatedThe compliance statement for entities which implement the CISCO-ITP-GSP2-MIB.my MIB
1.3.6.1.4.1.9.9.332.2.1.3ComplianceciscoGsp2MIBComplianceRev2read-onlydeprecatedThe compliance statement for entities which implement the CISCO-ITP-GSP2-MIB.my MIB
1.3.6.1.4.1.9.9.332.2.1.4ComplianceciscoGsp2MIBComplianceRev3read-onlydeprecatedThe compliance statement for entities which implement the CISCO-ITP-GSP2-MIB.my MIB
1.3.6.1.4.1.9.9.332.2.1.5ComplianceciscoGsp2MIBComplianceRev4read-onlycurrentThe compliance statement for entities which implement the CISCO-ITP-GSP2-MIB.my MIB
1.3.6.1.4.1.9.9.332.2.2NodeciscoGsp2MIBGroups
1.3.6.1.4.1.9.9.332.2.2.1GroupciscoGsp2EventsGroupcurrentSS7 Event objects.
1.3.6.1.4.1.9.9.332.2.2.2GroupciscoGsp2QosGroupcurrentSS7 Quality of Service objects.
1.3.6.1.4.1.9.9.332.2.2.3GroupciscoGsp2LocalPeerGroupcurrentSS7 Local Peer objects.
1.3.6.1.4.1.9.9.332.2.2.4GroupciscoGsp2Mtp3ErrorsGroupcurrentSS7 MTP3 Error objects.
1.3.6.1.4.1.9.9.332.2.2.5GroupciscoGsp2OperationGroupcurrentSS7 operation redundancy objects.
1.3.6.1.4.1.9.9.332.2.2.6GroupciscoGsp2LocalPeerGroupSup1currentSS7 Local Peer supplemental object to ciscoGsp2LocalPeerGroup.
1.3.6.1.4.1.9.9.332.2.2.7GroupciscoGsp2ContextGroupcurrentContextTable object to ciscoGsp2ContextGroup.
Type Definitions
NameSyntaxStatusDescription
Cgsp2EventIndexUnsigned32 (1..2147483647)currentA monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value the agent flushes the event table and wraps the value back to 1. Where lower values represent older entries a…
Cgsp2TcQosClassUnsigned32 (0..7)currentThe quality of service classification to be assigned to the IP packets used to transport the SS7 messages. Zero is a special value and is reserved to carry all traffic that does not specify a Qos or when exact match of …
CItpTcContextIdUnsigned32 (1..4294967295)currentEach context is assigned an unique identifier starting with one and are monotonically increased by one.
CItpTcContextTypeINTEGER { unknown(0), cs7link(1), asp(6) }currentIndicate type or resources ....