CISCO-MEDIA-QUALITY-MIB
215 objects
This MIB module enhances the DIAL-CONTROL-MIB (RFC2128) by providing call information and voice and video quality statistics of call legs over a telephony and voice over IP network. *** ABBREVIATIONS, ACRONYMS AND SYMBOLS *** ASP - Acoustic Shock Protection MIC - Microphone MOS - Mean Opinion Score NR - Noise Reduction TDM - Time-Division Multiplexing VOIP - Voice Over IP
Imported Objects
| CISCO-DIAL-CONTROL-MIB | cCallHistoryIndex |
| CISCO-SMI | ciscoMgmt |
| CISCO-VOICE-COMMON-DIAL-CONTROL-MIB | CvcCallReferenceIdOrZero CvcCoderTypeRate CvcGUid |
| DIAL-CONTROL-MIB | callActiveIndex callActiveSetupTime |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.769 | IdentityciscoMediaQualityMIB | This MIB module enhances the DIAL-CONTROL-MIB (RFC2128) by providing call information and voice and video quality statistics of call legs over a telephony and … | ||
| 1.3.6.1.4.1.9.9.769.0 | NodeciscoMediaQualityMIBNotifs | |||
| 1.3.6.1.4.1.9.9.769.1 | NodeciscoMediaQualityMIBObjects | |||
| 1.3.6.1.4.1.9.9.769.1.1 | NodecmqVoiceCallActive | |||
| 1.3.6.1.4.1.9.9.769.1.1.1 | TablecmqVoIPCallActiveTable | not-accessible | current | This table is the VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1 | RowcmqVoIPCallActiveEntry | not-accessible | current | An entry (conceptual row) in the cmqVoIPCallActiveTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB is c… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.1 | ColumncmqVoIPCallActiveConnectionId | read-only | current | The global connection identifier for the active VoIP leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.2 | ColumncmqVoIPCallActiveCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not h… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.3 | ColumncmqVoIPCallActiveRxCodecId | read-only | current | The codec type of the endpoint for the established voice path. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.4 | ColumncmqVoIPCallActiveRxSevConcealRatioPct | read-only | current | The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.5 | ColumncmqVoIPCallActiveRxCallConcealRatioPct | read-only | current | The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.6 | ColumncmqVoIPCallActiveRxPktLossRatioPct | read-only | current | The ratio of total effective received packet loss to the number of RTP packets expected. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.7 | ColumncmqVoIPCallActiveRxRoundTripTime | read-only | current | The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.8 | ColumncmqVoIPCallActiveRxCallDur | read-only | current | Duration of receive path open from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.9 | ColumncmqVoIPCallActiveRxVoiceDur | read-only | current | Duration of speech received from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.10 | ColumncmqVoIPCallActiveRxPktLossConcealDur | read-only | current | The sum of error predictive concealment and bad protocol concealment in milliseconds. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.11 | ColumncmqVoIPCallActiveRxPktCntExpected | read-only | current | The expected number of packets to be received. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.12 | ColumncmqVoIPCallActiveRxPktCntNotArrived | read-only | current | The expected number of packets minus the number of received packets. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.13 | ColumncmqVoIPCallActiveRxPktCntComfortNoise | read-only | current | The number of received comfort noise packets for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.14 | ColumncmqVoIPCallActiveRxPktCntUnusableLate | read-only | current | The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.15 | ColumncmqVoIPCallActiveRxPktCntDiscarded | read-only | current | The sum of the number of late packets and the number of bad protocol packets. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.16 | ColumncmqVoIPCallActiveRxPktCntEffLoss | read-only | current | The total number of never-arrived packets and the number of discarded packets. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.17 | ColumncmqVoIPCallActiveRxUnimpairedSecOK | read-only | current | The cumulative number of seconds during which there was no concealment and is considered as OK seconds. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.18 | ColumncmqVoIPCallActiveRxConcealSec | read-only | current | The cumulative number of seconds during which there was some concealment. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.19 | ColumncmqVoIPCallActiveRxSevConcealSec | read-only | current | The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.20 | ColumncmqVoIPCallActiveRxJBufMode | read-only | current | The jitter buffer mode configured for the endpoint. adaptive (1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter bu… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.21 | ColumncmqVoIPCallActiveRxJBufNomDelay | read-only | current | The nominal jitter buffer playout delay in milliseconds configured for the endpoint. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.22 | ColumncmqVoIPCallActiveRxJBufDlyNow | read-only | current | The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames m… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.23 | ColumncmqVoIPCallActiveRxJBufLowWater | read-only | current | The minimum jitter buffer playout delay in milliseconds configured for the endpoint. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.24 | ColumncmqVoIPCallActiveRxJBuffHiWater | read-only | current | The maximum jitter buffer playout delay in milliseconds configured for the endpoint. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.25 | ColumncmqVoIPCallActive3550JShortTermAvg | read-only | current | The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.26 | ColumncmqVoIPCallActive3550JCallAvg | read-only | current | The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.27 | ColumncmqVoIPCallActiveRxSignalLvl | read-only | current | The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.28 | ColumncmqVoIPCallActiveRxPred107Rscore | read-only | current | The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.29 | ColumncmqVoIPCallActiveRxPred107RMosListen | read-only | current | The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.30 | ColumncmqVoIPCallActiveRxPred107RScoreConv | read-only | current | The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.31 | ColumncmqVoIPCallActiveRxPred107RMosConv | read-only | current | Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid sco… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.32 | ColumncmqVoIPCallActiveRxPred107CodecIeBase | read-only | current | The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.33 | ColumncmqVoIPCallActiveRxPred107CodecBPL | read-only | current | The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.34 | ColumncmqVoIPCallActiveRxPred107DefaultR0 | read-only | current | R0 is a factor based on signal-to-noise ratio which also includes loudness ratings. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.35 | ColumncmqVoIPCallActiveRxPred107IeEff | read-only | current | Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.36 | ColumncmqVoIPCallActiveRxPred107Idd | read-only | current | Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.37 | ColumncmqVoIPCallActiveRxPredMosLqoAvg | read-only | current | The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid scor… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.38 | ColumncmqVoIPCallActiveRxPredMosLqoRecent | read-only | current | The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid sco… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.39 | ColumncmqVoIPCallActiveRxPredMosLqoBaseline | read-only | current | The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value … |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.40 | ColumncmqVoIPCallActiveRxPredMosLqoMin | read-only | current | The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid scor… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.41 | ColumncmqVoIPCallActiveRxPredMosLqoNumWin | read-only | current | A window in 8 seconds of frame loss data required to calculate the MOS estimate. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.42 | ColumncmqVoIPCallActiveRxPredMosLqoBursts | read-only | current | The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value in… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.43 | ColumncmqVoIPCallActiveRxPredMosLqoFrLoss | read-only | current | The average frame loss count since call start. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.44 | ColumncmqVoIPCallActiveRxPredMosLqoVerID | read-only | current | The MOS K-factor version ID, e.g. CVTQ v0.95 |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.45 | ColumncmqVoIPCallActiveTxCodecId | read-only | current | The codec type of the endpoint for the established voice path. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.46 | ColumncmqVoIPCallActiveTxVadEnabled | read-only | current | This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabl… |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.47 | ColumncmqVoIPCallActiveTxTmrCallDur | read-only | current | Duration of transmit path open from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.48 | ColumncmqVoIPCallActiveTxTmrActSpeechDur | read-only | current | Duration of speech transmitted from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.49 | ColumncmqVoIPCallActiveTxSignalLvl | read-only | current | The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.1.1.50 | ColumncmqVoIPCallActiveTxNoiseFloor | read-only | current | The instantaneous noise floor level estimate if VAD is enabled. |
| 1.3.6.1.4.1.9.9.769.1.1.2 | TablecmqCommonCallActiveNRTable | not-accessible | current | This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise reductio… |
| 1.3.6.1.4.1.9.9.769.1.1.2.1 | RowcmqCommonCallActiveNREntry | not-accessible | current | An entry (conceptual row) in the cmqCommonCallActiveNRTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB … |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.1 | ColumncmqCommonCallActiveNRConnectionId | read-only | current | The global connection identifier for the active leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.2 | ColumncmqCommonCallActiveNRCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not h… |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.3 | ColumncmqCommonCallActiveNRCallType | read-only | current | This object indicates the call type of the active call leg. tdm(1): TDM call leg. voip (2): VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.4 | ColumncmqCommonCallActiveNREnabledMic | read-only | current | This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'fa… |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.5 | ColumncmqCommonCallActiveNREnabledEar | read-only | current | This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'fa… |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.6 | ColumncmqCommonCallActiveNRDirMic | read-only | current | This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio s… |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.7 | ColumncmqCommonCallActiveNRDirEar | read-only | current | This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio s… |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.8 | ColumncmqCommonCallActiveNRLibVer | read-only | current | The library version of noise reduction module being used. |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.9 | ColumncmqCommonCallActiveNRIntensity | read-only | current | The intensity of the noise reduction being applied to audio signals. |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.10 | ColumncmqCommonCallActivePreNRNoiseFloorEstMic | read-only | current | The estimated noise floor level before noise redunction is applied in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.11 | ColumncmqCommonCallActivePostNRNoiseFloorEstMic | read-only | current | The estimated noise floor level after noise redunction is applied in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.12 | ColumncmqCommonCallActivePreNRNoiseFloorEstEar | read-only | current | The estimated noise floor level before noise redunction is applied in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.1.2.1.13 | ColumncmqCommonCallActivePostNRNoiseFloorEstEar | read-only | current | The estimated noise floor level after noise redunction is applied in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3 | TablecmqCommonCallActiveASPTable | not-accessible | current | This table is the voice and VoIP extension to the callActiveTable of DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoustic shock… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1 | RowcmqCommonCallActiveASPEntry | not-accessible | current | An entry (conceptual row) in the cmqCommonCallActiveASPTable. An entry into this table is created when its associated call active entry in the DIAL-CONTROL-MIB… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.1 | ColumncmqCommonCallActiveASPConnectionId | read-only | current | The global connection identifier for the active leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.2 | ColumncmqCommonCallActiveASPCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not h… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.3 | ColumncmqCommonCallActiveASPCallType | read-only | current | This object indicates the call type of the active call leg. tdm (1): TDM call leg. voip (2): VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.4 | ColumncmqCommonCallActiveASPEnabledMic | read-only | current | This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a va… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.5 | ColumncmqCommonCallActiveASPEnabledEar | read-only | current | This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a va… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.6 | ColumncmqCommonCallActiveASPDirMic | read-only | current | This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.7 | ColumncmqCommonCallActiveASPDirEar | read-only | current | This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.8 | ColumncmqCommonCallActiveASPMode | read-only | current | The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower det… |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.9 | ColumncmqCommonCallActiveASPVer | read-only | current | The version of acoustic shock protection applied to the audio signal. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.10 | ColumncmqCommonCallActiveNumSigASPTriggMic | read-only | current | The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.11 | ColumncmqCommonCallActiveDurSigASPTriggMic | read-only | current | The cumulative duration of all significant aooustic shock protection triggers in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.12 | ColumncmqCommonCallActiveTotNumASPTriggMic | read-only | current | The total number of acoustic shock protection triggers in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.13 | ColumncmqCommonCallActiveTotASPDurMic | read-only | current | The total duration of active acoustic shock protection suppression in milliseconds in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.14 | ColumncmqCommonCallActiveLoudestFreqEstForLongEpiMic | read-only | current | The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.15 | ColumncmqCommonCallActiveLongestDurEpiMic | read-only | current | The duration of the longest acoustic shock protection episode in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.16 | ColumncmqCommonCallActiveNumSigASPTriggEar | read-only | current | The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.17 | ColumncmqCommonCallActiveDurSigASPTriggEar | read-only | current | The cumulative duration of all significant aooustic shock protection triggers in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.18 | ColumncmqCommonCallActiveTotNumASPTriggEar | read-only | current | The total number of acoustic shock protection triggers in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.19 | ColumncmqCommonCallActiveTotASPDurEar | read-only | current | The total duration of active acoustic shock protection suppression in milliseconds in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.20 | ColumncmqCommonCallActiveLoudestFreqEstForLongEpiEar | read-only | current | The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.1.3.1.21 | ColumncmqCommonCallActiveLongestDurEpiEar | read-only | current | The duration of the longest acoustic shock protection episode in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2 | NodecmqVoiceCallHistory | |||
| 1.3.6.1.4.1.9.9.769.1.2.1 | TablecmqVoIPCallHistoryTable | not-accessible | current | This table is the VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics for the VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1 | RowcmqVoIPCallHistoryEntry | not-accessible | current | An entry (conceptual row) in the cmqVoIPCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTROL-… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.1 | ColumncmqVoIPCallHistoryConnectionId | read-only | current | The global connection identifier for the VoIP leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.2 | ColumncmqVoIPCallHistoryCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not h… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.3 | ColumncmqVoIPCallHistoryRxCodecId | read-only | current | The codec type of the endpoint for the established voice path. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.4 | ColumncmqVoIPCallHistoryRxSevConcealRatioPct | read-only | current | The ratio of severely concealed seconds to the sum of unimpaired seconds and concealed seconds. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.5 | ColumncmqVoIPCallHistoryRxCallConcealRatioPct | read-only | current | The ratio of the recent concealment time to recent talk-mode time interval. The talk-mode interval is 3 seconds. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.6 | ColumncmqVoIPCallHistoryRxPktLossRatioPct | read-only | current | The ratio of total effective received packet loss to the number of RTP packets expected. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.7 | ColumncmqVoIPCallHistoryRxRoundTripTime | read-only | current | The round-trip delay is the sum of measured network delay plus transmit and receive endpoint processing delays. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.8 | ColumncmqVoIPCallHistoryRxCallDur | read-only | current | Duration of receive path open from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.9 | ColumncmqVoIPCallHistoryRxVoiceDur | read-only | current | Duration of speech received from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.10 | ColumncmqVoIPCallHistoryRxPktLossConcealDur | read-only | current | The sum of error predictive concealment and bad protocol concealment in milliseconds. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.11 | ColumncmqVoIPCallHistoryRxPktCntExpected | read-only | current | The expected number of packets to be received. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.12 | ColumncmqVoIPCallHistoryRxPktCntNotArrived | read-only | current | The expected number of packets minus the number of received packets. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.13 | ColumncmqVoIPCallHistoryRxPktCntComfortNoise | read-only | current | The number of received comfort noise packets for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.14 | ColumncmqVoIPCallHistoryRxPktCntUnusableLate | read-only | current | The number of received voice packets that arrived too late to playout with CODEC (Coder/Decoder) during the call. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.15 | ColumncmqVoIPCallHistoryRxPktCntDiscarded | read-only | current | The sum of the number of late packets and the number of bad protocol packets. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.16 | ColumncmqVoIPCallHistoryRxPktCntEffLoss | read-only | current | The total number of never-arrived packets and the number of discarded packets. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.17 | ColumncmqVoIPCallHistoryRxUnimpairedSecOK | read-only | current | The cumulative number of seconds during which there was no concealment and is considered as OK seconds. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.18 | ColumncmqVoIPCallHistoryRxConcealSec | read-only | current | The cumulative number of seconds during which there was some concealment. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.19 | ColumncmqVoIPCallHistoryRxSevConcealSec | read-only | current | The total number of seconds that are severely concealed from the start of the voice stream. A severly concealed second has more than 50ms of concealment. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.20 | ColumncmqVoIPCallHistoryRxJBufMode | read-only | current | The jitter buffer mode configured for the endpoint. adaptive(1): an adaptive size algorithm for jitter buffer, fixed (2): a fixed size algorithm for jitter buf… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.21 | ColumncmqVoIPCallHistoryRxJBufNomDelay | read-only | current | The nominal jitter buffer playout delay in milliseconds configured for the endpoint. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.22 | ColumncmqVoIPCallHistoryRxJBufDlyNow | read-only | current | The playout delay buffer in milliseconds to accommodate interarrival jitter. The interarrival jitter is the network arrival jitter between consecutive frames m… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.23 | ColumncmqVoIPCallHistoryRxJBufLowWater | read-only | current | The minimum jitter buffer playout delay in milliseconds configured for the endpoint. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.24 | ColumncmqVoIPCallHistoryRxJBuffHiWater | read-only | current | The maximum jitter buffer playout delay in milliseconds configured for the endpoint. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.25 | ColumncmqVoIPCallHistory3550JShortTermAvg | read-only | current | The instantaneous RFC3550 playout delay buffer in milliseconds to accommodate packet jitter. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.26 | ColumncmqVoIPCallHistory3550JCallAvg | read-only | current | The long-term average of multiple RFC3550 playout delay buffer in milliseconds to accommodate packet jitter. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.27 | ColumncmqVoIPCallHistoryRxSignalLvl | read-only | current | The instantaneous input signal level to the telephony interface (TDM to IP network) that is used by the call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.28 | ColumncmqVoIPCallHistoryRxPred107Rscore | read-only | current | The R-factor based MOS Listening Quality, which is listening quality minus clarity only, with no delay component. A value of 0 indicates an invalid score and a… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.29 | ColumncmqVoIPCallHistoryRxPred107RMosListen | read-only | current | The MOS Listening Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid score… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.30 | ColumncmqVoIPCallHistoryRxPred107RScoreConv | read-only | current | The R-factor based MOS Conversation Quality, which is based on loss plus absolute delay. A value of 0 indicates an invalid score and a positive value indicates… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.31 | ColumncmqVoIPCallHistoryRxPred107RMosConv | read-only | current | Th MOS Conversation Quality Estimate is computed on a running basis with a new value every 10 seconds of received speech. A value of 0 indicates an invalid sco… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.32 | ColumncmqVoIPCallHistoryRxPred107CodecIeBase | read-only | current | The base Ie score is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in killobits per second. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.33 | ColumncmqVoIPCallHistoryRxPred107CodecBPL | read-only | current | The bpl is a factor to calculate IeEff value. It is obtained from G.113 table according to the codec type and is defined in kilobits per second. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.34 | ColumncmqVoIPCallHistoryRxPred107DefaultR0 | read-only | current | R0 is a factor based on signal-to-noise ratio which also includes loudness ratings. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.35 | ColumncmqVoIPCallHistoryRxPred107IeEff | read-only | current | Ie-eff is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Ie is a component which depends on the real… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.36 | ColumncmqVoIPCallHistoryRxPred107Idd | read-only | current | Idd is one of the components to contribute to MOS R-factor calculations, where R-factor is based on ITU-T G.107. Idd is a delay impairment factor which depends… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.37 | ColumncmqVoIPCallHistoryRxPredMosLqoAvg | read-only | current | The statistical average MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid scor… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.38 | ColumncmqVoIPCallHistoryRxPredMosLqoRecent | read-only | current | The most recent MOS score with K-factor input based on frame loss and codec. A value of 0 indicates an invalid score and a positive value indicates a valid sco… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.39 | ColumncmqVoIPCallHistoryRxPredMosLqoBaseline | read-only | current | The maximum or codec zero-impairment baseline MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value … |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.40 | ColumncmqVoIPCallHistoryRxPredMosLqoMin | read-only | current | The statistical minimum MOS score of all the previous instantaneous values. A value of 0 indicates an invalid score and a positive value indicates a valid scor… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.41 | ColumncmqVoIPCallHistoryRxPredMosLqoNumWin | read-only | current | A window in 8 seconds of frame loss data required to calculate the MOS estimate. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.42 | ColumncmqVoIPCallHistoryRxPredMosLqoBursts | read-only | current | The MOS score calculated with K-factor input of consecutive frame loss events, or error bursts. A value of 0 indicates an invalid score and a positive value in… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.43 | ColumncmqVoIPCallHistoryRxPredMosLqoFrLoss | read-only | current | The average frame loss count since call start. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.44 | ColumncmqVoIPCallHistoryRxPredMosLqoVerID | read-only | current | The MOS K-factor version ID, e.g. CVTQ v0.95 |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.45 | ColumncmqVoIPCallHistoryTxCodecId | read-only | current | The codec type of the endpoint for the established voice path. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.46 | ColumncmqVoIPCallHistoryTxVadEnabled | read-only | current | This flag indicates whether VAD (Voice Activation Detector) is enabled or disabled. A value of 'true' indicates enabled and a value of 'false' indicates disabl… |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.47 | ColumncmqVoIPCallHistoryTxTmrCallDur | read-only | current | Duration of transmit path open from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.48 | ColumncmqVoIPCallHistoryTxTmrActSpeechDur | read-only | current | Duration of speech transmitted from this peer to voice gateway for the call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.49 | ColumncmqVoIPCallHistoryTxSignalLvl | read-only | current | The instantaneous output signal level from the telephony interface (TDM to IP network) that is used by the call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.1.1.50 | ColumncmqVoIPCallHistoryTxNoiseFloor | read-only | current | The instantaneous noise floor level estimate if VAD is enabled. |
| 1.3.6.1.4.1.9.9.769.1.2.2 | TablecmqCommonCallHistoryNRTable | not-accessible | current | This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when noise … |
| 1.3.6.1.4.1.9.9.769.1.2.2.1 | RowcmqCommonCallHistoryNREntry | not-accessible | current | An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTRO… |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.1 | ColumncmqCommonCallHistoryNRConnectionId | read-only | current | The global connection identifier for the history leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.2 | ColumncmqCommonCallHistoryNRCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not h… |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.3 | ColumncmqCommonCallHistoryNRCallType | read-only | current | This object indicates the call type of the history call leg. tdm (1): TDM call leg. voip (2): VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.4 | ColumncmqCommonCallHistoryNREnabledMic | read-only | current | This flag indicates whether noise reduction is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a value of 'fa… |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.5 | ColumncmqCommonCallHistoryNREnabledEar | read-only | current | This flag indicates whether noise reduction is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a value of 'fa… |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.6 | ColumncmqCommonCallHistoryNRDirMic | read-only | current | This object indicates the direction to which noise reduction is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2): audio s… |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.7 | ColumncmqCommonCallHistoryNRDirEar | read-only | current | This object indicates the direction to which noise reduction is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2): audio s… |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.8 | ColumncmqCommonCallHistoryNRLibVer | read-only | current | The library version of noise reduction module being used. |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.9 | ColumncmqCommonCallHistoryNRIntensity | read-only | current | The intensity of the noise reduction being applied to audio signals. |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.10 | ColumncmqCommonCallHistoryPreNRNoiseFloorEstMic | read-only | current | The estimated noise floor level before noise redunction is applied in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.11 | ColumncmqCommonCallHistoryPostNRNoiseFloorEstMic | read-only | current | The estimated noise floor level after noise redunction is applied in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.12 | ColumncmqCommonCallHistoryPreNRNoiseFloorEstEar | read-only | current | The estimated noise floor level before noise redunction is applied in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2.2.1.13 | ColumncmqCommonCallHistoryPostNRNoiseFloorEstEar | read-only | current | The estimated noise floor level after noise redunction is applied in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3 | TablecmqCommonCallHistoryASPTable | not-accessible | current | This table is the voice and VoIP extension to the cCallHistoryTable of CISCO-DIAL-CONTROL-MIB. It contains voice quality information and statistics when acoust… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1 | RowcmqCommonCallHistoryASPEntry | not-accessible | current | An entry (conceptual row) in the cmqCommonCallHistoryTable. An entry into this table is created when its associated call history entry in the CISCO-DIAL-CONTRO… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.1 | ColumncmqCommonCallHistoryASPConnectionId | read-only | current | The global connection identifier for the history leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.2 | ColumncmqCommonCallHistoryASPCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. An audio-only call with a call reference ID of zero will not h… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.3 | ColumncmqCommonCallHistoryASPCallType | read-only | current | This object indicates the call type of the history call leg. tdm (1): TDM call leg voip (2): VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.4 | ColumncmqCommonCallHistoryASPEnabledMic | read-only | current | This flag indicates whether acoustic shock protection is enabled or disabled in the MIC direction. A value of 'true' for this object indicates enabled and a va… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.5 | ColumncmqCommonCallHistoryASPEnabledEar | read-only | current | This flag indicates whether acoustic shock protection is enabled or disabled in the ear direction. A value of 'true' for this object indicates enabled and a va… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.6 | ColumncmqCommonCallHistoryASPDirMic | read-only | current | This object indicates the direction to which acoustic shock protection is applied in the network with respect to MIC. tdm (1): audio stream is from TDM, wan (2… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.7 | ColumncmqCommonCallHistoryASPDirEar | read-only | current | This object indicates the direction to which acoustic shock protection is applied in the network with respect to ear. tdm (1): audio stream is from TDM, wan (2… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.8 | ColumncmqCommonCallHistoryASPMode | read-only | current | The acoutsic shock protection mode indicates the sensitivity of operation. auto (1): default mode, a trade-off between slow and fast mode, slow (2): slower det… |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.9 | ColumncmqCommonCallHistoryASPVer | read-only | current | The version of acoutsic shock protection applied to audio signals. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.10 | ColumncmqCommonCallHistoryNumSigASPTriggMic | read-only | current | The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.11 | ColumncmqCommonCallHistoryDurSigASPTriggMic | read-only | current | The cumulative duration of all significant aooustic shock protection triggers in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.12 | ColumncmqCommonCallHistoryTotNumASPTriggMic | read-only | current | The total number of acoustic shock protection triggers in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.13 | ColumncmqCommonCallHistoryTotASPDurMic | read-only | current | The total duration of acoustic shock protection suppression in milliseconds in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.14 | ColumncmqCommonCallHistoryLoudestFreqEstForLongEpiMic | read-only | current | The loudest frequency estimate for the longest acoustic shock protection episode in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.15 | ColumncmqCommonCallHistoryLongestDurEpiMic | read-only | current | The duration of the longest acoustic shock protection episode in the MIC direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.16 | ColumncmqCommonCallHistoryNumSigASPTriggEar | read-only | current | The number of significant acoustic shock protection triggers which has a duration of greater than 2 seconds and is applied in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.17 | ColumncmqCommonCallHistoryDurSigASPTriggEar | read-only | current | The cumulative duration of all significant aooustic shock protection triggers in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.18 | ColumncmqCommonCallHistoryTotNumASPTriggEar | read-only | current | The total number of acoustic shock protection triggers in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.19 | ColumncmqCommonCallHistoryTotASPDurEar | read-only | current | The total duration of acoustic shock protection suppression in milliseconds in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.20 | ColumncmqCommonCallHistoryLoudestFreqEstForLongEpiEar | read-only | current | The loudest frequency estimate for the longest acoustic shock protection episode in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.2.3.1.21 | ColumncmqCommonCallHistoryLongestDurEpiEar | read-only | current | The duration of the longest acoustic shock protection episode in the ear direction. |
| 1.3.6.1.4.1.9.9.769.1.3 | NodecmqVideoCallActive | |||
| 1.3.6.1.4.1.9.9.769.1.3.1 | TablecmqVideoCallActiveTable | not-accessible | current | This table is the video extension to the call active table of DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1 | RowcmqVideoCallActiveEntry | not-accessible | current | An entry (conceptual row) in the cmqVideoCallActiveTable. An entry is added to the table when the below conditions are met: 1. A call active entry in callActiv… |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.1 | ColumncmqVideoCallActiveConnectionId | read-only | current | The global connection identifier for the video leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.2 | ColumncmqVideoCallActiveCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.3 | ColumncmqVideoCallActiveRxMOSInstant | read-only | current | Instantaneous aggregated MOS in the receive direction, where 0 is an invalid score and the lowest score starts with 1. A value of 100 indicates the best video … |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.4 | ColumncmqVideoCallActiveRxCompressDegradeInstant | read-only | current | The percentage of quality loss (indicated by RX instantaneous MOS) due to the initial compression of video at an end point introduced by a video encoder. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.5 | ColumncmqVideoCallActiveRxNetworkDegradeInstant | read-only | current | The percentage of quality loss (indicated by RX instantaneous MOS) due to network factors, such as jitter, delay and packet loss. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.6 | ColumncmqVideoCallActiveRxTransscodeDegradeInstant | read-only | current | The percentage of quality loss (indicated by RX instantaneous MOS) due to the transcoding, including transrating, of a video stream. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.7 | ColumncmqVideoCallActiveRxMOSAverage | read-only | current | Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A va… |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.8 | ColumncmqVideoCallActiveRxCompressDegradeAverage | read-only | current | The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.9 | ColumncmqVideoCallActiveRxNetworkDegradeAverage | read-only | current | The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss. |
| 1.3.6.1.4.1.9.9.769.1.3.1.1.10 | ColumncmqVideoCallActiveRxTransscodeDegradeAverage | read-only | current | The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream. |
| 1.3.6.1.4.1.9.9.769.1.4 | NodecmqVideoCallHistory | |||
| 1.3.6.1.4.1.9.9.769.1.4.1 | TablecmqVideoCallHistoryTable | not-accessible | current | This table is the video extension to the call history table of CISCO-DIAL-CONTROL-MIB. It contains video quality information for the VoIP call leg. |
| 1.3.6.1.4.1.9.9.769.1.4.1.1 | RowcmqVideoCallHistoryEntry | not-accessible | current | An entry (conceptual row) in the cmqVideoCallHistoryTable. An entry is added to the table when the below conditions are met: 1. A call history entry in cCallHi… |
| 1.3.6.1.4.1.9.9.769.1.4.1.1.1 | ColumncmqVideoCallHistoryConnectionId | read-only | current | The global connection identifier for the video leg of the call. |
| 1.3.6.1.4.1.9.9.769.1.4.1.1.2 | ColumncmqVideoCallHistoryCallReferenceId | read-only | current | The call reference ID associates the video call entry and voice call entry of the same endpoint. |
| 1.3.6.1.4.1.9.9.769.1.4.1.1.3 | ColumncmqVideoCallHistoryRxMOSAverage | read-only | current | Average aggregated MOS in the receive direction since the beginning of the video session. 0 indicates an invalid score and the lowest score starts with 1. A va… |
| 1.3.6.1.4.1.9.9.769.1.4.1.1.4 | ColumncmqVideoCallHistoryRxCompressDegradeAverage | read-only | current | The percentage of quality loss (indicated by RX average MOS) due to the initial compression of video at an end point introduced by a video encoder. |
| 1.3.6.1.4.1.9.9.769.1.4.1.1.5 | ColumncmqVideoCallHistoryRxNetworkDegradeAverage | read-only | current | The percentage of quality loss (indicated by RX average MOS) due to network factors, such as jitter, delay and packet loss. |
| 1.3.6.1.4.1.9.9.769.1.4.1.1.6 | ColumncmqVideoCallHistoryRxTransscodeDegradeAverage | read-only | current | The percentage of quality loss (indicated by RX average MOS) due to the transcoding, including transrating, of a video stream. |
| 1.3.6.1.4.1.9.9.769.2 | NodeciscoMediaQualityMIBConform | |||
| 1.3.6.1.4.1.9.9.769.2.1 | NodeciscoMediaQualityMIBCompliances | |||
| 1.3.6.1.4.1.9.9.769.2.1.1 | ComplianceciscoMediaQualityMIBCompliance | current | The compliance statement for the SNMP entities that implement ciscoMediaQualityMIB module. | |
| 1.3.6.1.4.1.9.9.769.2.2 | NodeciscoMediaQualityMIBGroups | |||
| 1.3.6.1.4.1.9.9.769.2.2.1 | GroupcmqVoiceCallActiveGroup | current | The collection of objects that provide voice quality statistics for active voice calls. | |
| 1.3.6.1.4.1.9.9.769.2.2.2 | GroupcmqVoiceCallHistoryGroup | current | The collection of objects that provide voice quality statistics for history voice calls. | |
| 1.3.6.1.4.1.9.9.769.2.2.3 | GroupcmqVideoCallActiveGroup | current | The collection of objects that provide video quality statistics for active video calls. | |
| 1.3.6.1.4.1.9.9.769.2.2.4 | GroupcmqVideoCallHistoryGroup | current | The collection of objects that provide video quality statistics for history video calls. |