CISCO-MEGACO-EXT-MIB
243 objects
The MIB module is an extension of CISCO-IETF-MEGACO-MIB. It defines the attributes of ITU H.248 protocol.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.104 | IdentityciscoMegacoExtMIB | The MIB module is an extension of CISCO-IETF-MEGACO-MIB. It defines the attributes of ITU H.248 protocol. | ||
| 1.3.6.1.4.1.9.10.104.0 | NodeciscoMegacoExtMIBNotifications | |||
| 1.3.6.1.4.1.9.10.104.1 | NodeciscoMegacoExtMIBObjects | |||
| 1.3.6.1.4.1.9.10.104.1.1 | NodecmedxConfig | |||
| 1.3.6.1.4.1.9.10.104.1.1.1 | TablecmedxGatewayConfigTable | not-accessible | current | The Cisco media gateway configuration extended table defines the parameters related to the configuration of the media gateway in H.248 protocol. Each entry rep… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1 | RowcmedxGatewayConfigEntry | not-accessible | current | An entry containing additional H.248 protocol related configuration applicable to a media gateway. The following objects must be provided when the entry is cre… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.1 | ColumncmedxGatewayMgcGroupIndex | read-create | current | This object specifies the MGC group parameters associated with MGC group index. Those parameters are for the communication between this media gateway and the M… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.2 | ColumncmedxGatewayIpAddressIndex | read-create | current | This object specifies the media gateway IP address. It is the index of the entry in cMediaGwIpConfigTable which defines the media gateway address over control … |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.3 | ColumncmedxGatewayAssociationId | read-only | current | This object indicates the unique identification of the H.248 association assigned by the H.248 Stack. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.4 | ColumncmedxGatewayMaxContexts | read-create | current | Maximum number of contexts is allowed in this media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.5 | ColumncmedxGatewayMaxTermsInContext | read-create | current | Maximum number of terminations per context in this media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.6 | ColumncmedxGatewayMgExecTime | read-create | current | This object specifies the interval within which the MGC expects a response to any transaction from the MG (exclusive of network delay specified by the object c… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.7 | ColumncmedxGatewayMgcExecTime | read-create | current | This object specifies the interval within which the MG should expects a response to any transaction from the MGC (exclusive of network delay specified by the o… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.8 | ColumncmedxGatewayProvisionRespTime | read-create | deprecated | This object specifies the time within which to expect a Pending Response if a transaction cannot be completed in the media gateway and in the MGCs of the media… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.9 | ColumncmedxGatewayNumConnRetries | read-create | current | The number of times the media gateway retries to connect to MGC before it sends out disconnect command. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.10 | ColumncmedxGatewayMaxWaitingDelay | read-create | current | When a media gateway is powered on, it should initiate a restart timer to a random value, uniformly distributed between 0 and the value specified in this objec… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.11 | ColumncmedxGatewayRestartDelay | read-create | current | This object specifies The time delay before the media gateway accept any call from MGC after it sends the command 'ServiceChange' with a 'Restart'. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.12 | ColumncmedxGatewayRespRetentionTime | read-create | current | This object specifies the time till which the responses should be retained before they are sent if they receive a repetition of a transaction that is still bei… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.13 | ColumncmedxGatewayInitialRtt | read-create | current | Initial round-trip time for the H.248 transaction to be responded. It reflects the network delay time. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.14 | ColumncmedxGatewayInactivityTime | read-create | current | This object specifies the the period of silence between messages from MGC. If the period of silence exceeds the value of this object, then a Notify command wit… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.15 | ColumncmedxGatewayHeaderAddrType | read-create | current | The address type in the H.248 message header. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.16 | ColumncmedxGatewayDownServiceDelay | read-create | current | This object specifies the grace period before the media gateway link to be taken out of service. The value of 0 means to take the media gateway link out of ser… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.17 | ColumncmedxGatewayActiveMgcAddress | read-only | current | The address of the currently active MGC in this media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.18 | ColumncmedxGatewayActiveMgcDomain | read-only | current | The domain name of the currently active MGC in this media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.19 | ColumncmedxGatewayActiveMgcPortNum | read-only | current | The transport layer port number of the currently active MGC in this media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.20 | ColumncmedxGatewayStateChangeReason | read-only | current | This object indicates the reason for the operational state change (cmedGatewayOperStatus) in the media gateway link. mgcDirected (1) - The state change is dire… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.21 | ColumncmedxGatewayStateChangeMethod | read-only | current | This object indicates the method for the operational state change (cmedGatewayOperStatus) in the media gateway link. other (1) - None of the methods listed bel… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.22 | ColumncmedxGatewayAdminAction | read-create | current | This object specifies the action that users used to change the service state of the media gateway link. This object can be modified while the entry is active. … |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.23 | ColumncmedxGatewayServiceState | read-only | current | This object indicates current operation status of the media gateway link. inService (1) - The media gateway link is in-service. pendingIs (2) - The media gatew… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.24 | ColumncmedxGatewayDynamicTpktVersion | read-create | current | This object specifies the TPKT header version that is dynamically assigned based on the size of the packet presented to TCP layer. The TPKT header version is s… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.25 | ColumncmedxGatewayMaxCommandMsgSize | read-create | current | This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway initiated commands. For example, this o… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.26 | ColumncmedxGatewayMaxReplyMsgSize | read-create | current | This object specifies the maximum message size on this gateway link for a H248 transaction containing the media gateway reply messages to MGC. For example, thi… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.27 | ColumncmedxGatewaySctpAssocId | read-only | current | This object specifies the SCTP association ID associated with the H.248 association. This SCTP association ID is the index (cSctpAssocId) of the entry in cSctp… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.28 | ColumncmedxGatewaySrvChgProfile | read-create | current | This object specifies the profile name used in the profile parameter of ServiceChange message to specify the attributes and behaviors of the media gateway. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.29 | ColumncmedxGatewaySrvChgProfileVer | read-create | current | This object specifies the version of the profile indicated in cmedxGatewaySrvChgProfile. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.30 | ColumncmedxGatewayMsgTokenType | read-create | current | This object specifies the H248 message is in short formatted PDU or long formatted PDU. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.31 | ColumncmedxGatewayMgProvisionRspTime | read-create | current | This object specifies the time within which to expect a Pending Response if a transaction cannot be completed in the media gateway and in the MGCs of the media… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.32 | ColumncmedxGatewayMgcProvisionRspTime | read-create | current | This object specifies the time within which to expect a Pending Response from the MGC if a transaction cannot be completed. The value of this object should be … |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.33 | ColumncmedxGatewayMgOrigPendLimit | read-create | current | This object specifies the number of TransactionPendings that MG will send. Once this limit is exceeded, MG will send a TransactionReply with Error 506. |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.34 | ColumncmedxGatewayMgcOrigPendLimit | read-create | current | This object specifies the number of TransactionPendings that MG expects to receive. Once this limit is exceeded, MG will assume a TransactionReply with Error 5… |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.35 | ColumncmedxGatewayDomainName | read-create | current | This object specifies the unique domain name to be used for each gateway link. This object is relevant only if cmedxGatewayHeaderAddrType is set to 'dns'. The … |
| 1.3.6.1.4.1.9.10.104.1.1.1.1.36 | ColumncmedxGatewayCmbDnAndPortInMID | read-create | current | This object specifies whether the MID should be a combination of the transport port number and the domain name represented by cmedGatewayPort and cmedxGatewayD… |
| 1.3.6.1.4.1.9.10.104.1.1.2 | TablecmedxTerminationTypeTable | not-accessible | current | This table defines the attributes of a termination type for a group of ephemeral terminations. |
| 1.3.6.1.4.1.9.10.104.1.1.2.1 | RowcmedxTerminationTypeEntry | not-accessible | current | Each entry represents one termination type for a group of ephemeral terminations in H.248. When creating an entry, the object cmedxTermType have to be provided. |
| 1.3.6.1.4.1.9.10.104.1.1.2.1.1 | ColumncmedxTermTypeId | not-accessible | current | An unique identification number that is assigned to the termination type by the manager |
| 1.3.6.1.4.1.9.10.104.1.1.2.1.2 | ColumncmedxTermType | read-create | current | This object specifies the type of a group of ephemeral terminations. unknown (1) - none of the types listed below. scn (2) - SCN/DS terminations pdnRtp (3) - P… |
| 1.3.6.1.4.1.9.10.104.1.1.2.1.3 | ColumncmedxTermTypeProfileId | read-create | current | The property profile identifier with which the terminations within this termination type will be associated. |
| 1.3.6.1.4.1.9.10.104.1.1.2.1.4 | ColumncmedxTermTypePkgIds | read-create | current | The H.248 packages applied to this termination type. |
| 1.3.6.1.4.1.9.10.104.1.1.2.1.5 | ColumncmedxTermTypeRowStatus | read-create | current | This object is used to create new rows, modify existing rows and to delete existing rows. |
| 1.3.6.1.4.1.9.10.104.1.1.3 | TablecmedxProfileTable | not-accessible | current | This table contains a list of the configurable properties in the H.248 profile supported in a media gateway. A property profile can be applied to a termination… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1 | RowcmedxProfileEntry | not-accessible | current | Each entry represents all possible configurable properties supported by Cisco media gateway in an H.248 profile. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.1 | ColumncmedxProfileIndex | not-accessible | current | This object uniquely identifies the H.248 profile. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.2 | ColumncmedxProfilePlayCpToneInterDur | read-create | current | This object specifies the duration for playing a list of call progressing tones between two call progressing signals. The value of 0 indicates there is no wait… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.3 | ColumncmedxProfileDtmfDigitOnDur | read-create | current | This object specifies the duration of the active DTMF digit during DTMF playout from the gateway. A complete DTMF digit is characterized by DTMF on with durati… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.4 | ColumncmedxProfileDtmfPauseDur | read-create | current | This object specifies the duration of the pause after an active DTMF digit during DTMF playout from the gateway. For playout of multiple DTMF digits, the sum o… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.5 | ColumncmedxProfileCot1Frequency | read-create | current | This object specifies the tone frequency to be transmit between gateways in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.6 | ColumncmedxProfileCot2Frequency | read-create | current | This object specifies the tone frequency to be received between gateways in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.7 | ColumncmedxProfileInitiateCotDur | read-create | current | This object specifies the duration for the continuity test tone to be played when the gateway initiates a COT. The value of 0 indicates that the tone will be p… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.8 | ColumncmedxProfileRespCotMethod | read-create | current | This object specifies the method for responding to COT (Continuity Test Tone) when the gateway detects a the continuity test signal. loopback (1) - The gateway… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.9 | ColumncmedxProfileDetectLongCpToneDur | read-create | current | This object specifies the duration for detecting a long call progressing tone. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.10 | ColumncmedxProfileDetectLongDigitDur | read-create | current | This object specifies the duration for detecting a long digit tone signal. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.11 | ColumncmedxProfileEchoCancelEnabled | read-create | current | This object specifies whether or not the Echo Cancellation is enabled or not. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.12 | ColumncmedxProfileEchoCancelTail | read-create | current | This object specifies the Echo Canceler coverage. This object is valid if the cmedxProfileEchoCancelEnabled object is 'true'. echoCanceller8ms - 8 ms echo canc… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.13 | ColumncmedxProfileInGainControl | read-create | current | This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB se… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.14 | ColumncmedxProfileOutAttnControl | read-create | current | This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to t… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.15 | ColumncmedxProfileVoIpVadEnabled | read-create | current | This object specifies VAD (Voice Activity Detection) is enabled for the compression DSPs of this interface when the application is VoIP. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.16 | ColumncmedxProfileVoIpVadTimer | read-create | current | This object specifies the hangover time for VAD in the VoIP application. Once the voice inactivity is detected, the media gateway waits for the duration of thi… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.17 | ColumncmedxProfileVoAal2VadTimer | read-create | current | This object specifies the hangover time for VAD in the VoATM over AAL2 application. Once the voice inactivity is detected, the media gateway waits for the dura… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.18 | ColumncmedxProfileAtmBearerType | read-create | current | This object specifies ATM bearer type. bearerSvc (1) - the ATM bearer type is SVC (Switched Virtual Circuit). bearerPvc (1) - the ATM bearer type is PVC (Perma… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.19 | ColumncmedxProfileAtmAalPartialFill | read-create | current | This object specifies the fill level of cells in case of AAL adaptation . The value of this object will be used if the MGC does not specify partial fill in the… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.20 | ColumncmedxProfileAtmAalType | read-create | current | This object specifies the adaptation layer of ATM. other (1) - None of the types listed below. aal1 (2) - ATM AAL1 adaptation layer aal1Sdt (3) - ATM AAL1 with… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.21 | ColumncmedxProfileSuppressBearerDigit | read-create | current | This object controls if the digits should be suppressed from voice media stream. When MGC has requested digits, if this object is set to 'true', the digits wil… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.22 | ColumncmedxProfileRowStatus | read-create | current | When an entry is created, at least one of the objects in the entry has to be provided and the default value will be assigned to the rest of the objects. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.23 | ColumncmedxProfileOriginatingCotTx | read-create | current | This object specifies the COT tone to be transmitted from originating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.24 | ColumncmedxProfileOriginatingCotRx | read-create | current | This object specifies the COT tone to be received in originating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.25 | ColumncmedxProfileTerminatingCotTx | read-create | current | This object specifies the COT tone to be transmitted from terminating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.26 | ColumncmedxProfileTerminatingCotRx | read-create | current | This object specifies the COT tone to be received in terminating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.27 | ColumncmedxProfileComfortNoiseGenerate | read-create | current | This object specifies the type of comfort noise generation: (1) none: No comfort noise generation applied (2) simple: Cisco Proprietary comfort noise generatio… |
| 1.3.6.1.4.1.9.10.104.1.1.4 | TablecmedxCallReduceControlTable | not-accessible | current | The MIB objects in this table are used to control the rate at which call attempts are made by Media gateway controller on this Media Gateway. |
| 1.3.6.1.4.1.9.10.104.1.1.4.1 | RowcmedxCallReduceControlEntry | not-accessible | current | An entry in this table contains the control parameters that indicate the frequency and number of notifications sent to MGC in the event congestion is detected … |
| 1.3.6.1.4.1.9.10.104.1.1.4.1.1 | ColumncmedxCallCongEnabled | read-write | current | This object controls if the H.248 congestion package (H.248.10) and its associated features should be enabled for the media gateway. If this object is set to '… |
| 1.3.6.1.4.1.9.10.104.1.1.4.1.2 | ColumncmedxCallRenotifInterval | read-write | current | This object specifies the interval of the congestion renotification from the media gateway to the MGC. In the event of congestion on the Media Gateway, gateway… |
| 1.3.6.1.4.1.9.10.104.1.1.4.1.3 | ColumncmedxCRRNumOfLevel | read-write | current | This objects specifies the number of level corresponding to which a different call reduction rate notification is generated towards MGC. Each level has a diffe… |
| 1.3.6.1.4.1.9.10.104.1.1.4.1.4 | ColumncmedxCurrentCRR | read-only | current | This object indicates the current percentage reduction in the rate of calls that MGC is attempting towards MG. |
| 1.3.6.1.4.1.9.10.104.1.1.4.1.5 | ColumncmedxCrrNotifyState | read-only | current | This object indicates the current gateway congestion notification state. The value of 'true' means the gateway will notify MGC when the gateway is congested. T… |
| 1.3.6.1.4.1.9.10.104.1.1.4.1.6 | ColumncmedxCrrNotifyEnabled | read-only | current | This object indicates the bit map of the H248 association index (cmedGatewayLinkId) in which the gateway congestion notification is enabled. The MSB (most sign… |
| 1.3.6.1.4.1.9.10.104.1.1.4.1.7 | ColumncmedxCurrentCallState | read-only | current | This object indicates the state of the gateway in accepting the incoming new call. acceptCall - the incoming new call will be processed. dropCall - the incomin… |
| 1.3.6.1.4.1.9.10.104.1.1.5 | TablecmedxCallReduceLevelTable | not-accessible | current | The table presents mapping between a level and corresponding call reduction rate. |
| 1.3.6.1.4.1.9.10.104.1.1.5.1 | RowcmedxCallReduceLevelEntry | not-accessible | current | The number of entry on this table is determined by the MIB object 'cmedxCRRNumOfLevel'. |
| 1.3.6.1.4.1.9.10.104.1.1.5.1.1 | ColumncmedxCallReduceLevelNum | not-accessible | current | The index starts from 1, and the maximum index equals to 'cmedxCRRNumOfLevel'. |
| 1.3.6.1.4.1.9.10.104.1.1.5.1.2 | ColumncmedxCallReduceRate | read-write | current | This object indicates call reduction rate (CRR) for a given call reduce rate level. The default value of this object is based on the formula: level 1: 100 othe… |
| 1.3.6.1.4.1.9.10.104.1.1.6 | TablecmedxCodecNegotiationTable | not-accessible | current | This table contains configuration information for different type of CODEC negotiation of calls which include voice call over adaptation layer AAL1 and AAL5. If… |
| 1.3.6.1.4.1.9.10.104.1.1.6.1 | RowcmedxCodecNegotiationEntry | not-accessible | current | An entry represents a CODEC rate supported for VoIP or VoATM with AAL1 or AAL5 application in the media gateway. A list of entries for all CODEC types supporte… |
| 1.3.6.1.4.1.9.10.104.1.1.6.1.1 | ColumncmedxCodecNegotiationCodec | not-accessible | current | This object specifies the CODEC to be used in this profile. |
| 1.3.6.1.4.1.9.10.104.1.1.6.1.2 | ColumncmedxCodecNegotiationPreference | read-write | current | This object specified the preference configured by the user for each CODEC. Lower the number, higher the preference of the CODEC. If this object is set to 0, t… |
| 1.3.6.1.4.1.9.10.104.1.1.7 | TablecmedxOverloadControlTable | not-accessible | current | This table is used to configure the media gateway overload control parameters specified in H.248.11 package. |
| 1.3.6.1.4.1.9.10.104.1.1.7.1 | RowcmedxOverloadControlEntry | not-accessible | current | An entry in this table contains the overload control parameters of the media gateway. |
| 1.3.6.1.4.1.9.10.104.1.1.7.1.1 | ColumncmedxOverloadControlEnabled | read-write | current | This object controls if the H.248 overload package (H.248.11) and its associated features should be enabled for the media gateway. If this object is set to 'fa… |
| 1.3.6.1.4.1.9.10.104.1.1.7.1.2 | ColumncmedxOverloadNotifyState | read-only | current | This object indicates the current gateway overload notification state. The value of 'true' means the gateway will notify MGC when the gateway is overloaded. Th… |
| 1.3.6.1.4.1.9.10.104.1.1.7.1.3 | ColumncmedxOverloadNotifyEnabled | read-only | current | This object indicates the bit map of the H248 association index (cmedGatewayLinkId) in which the gateway overload notification is enabled. The MSB (most signif… |
| 1.3.6.1.4.1.9.10.104.1.2 | NodecmedxStats | |||
| 1.3.6.1.4.1.9.10.104.1.2.1 | TablecmedxGatewayStatsTable | not-accessible | current | This table is extended from cmedGatewayStatsTable which contains additional control protocol related statistics of the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.1.1 | RowcmedxGatewayStatsEntry | not-accessible | current | Entry holding statistics about a group of media Gateway/signaling link pair |
| 1.3.6.1.4.1.9.10.104.1.2.1.1.1 | ColumncmedxGatewayLastEvent | read-only | current | The event code of the last event occurred on the link. |
| 1.3.6.1.4.1.9.10.104.1.2.2 | TablecmedxCommandStatsTable | not-accessible | current | This table provides the H.248 Command related statistics for the media gateway link. The H.248 protocol provides commands for manipulating the logical entities… |
| 1.3.6.1.4.1.9.10.104.1.2.2.1 | RowcmedxCommandStatsEntry | not-accessible | current | The system creates one entry for each media gateway link when it is created. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.1 | ColumncmedxCmdNumAddFails | read-only | current | Total number of cumulative ADD commands failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.2 | ColumncmedxCmdNumAddSucceeds | read-only | current | Total number of cumulative ADD command succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.3 | ColumncmedxCmdNumSubtractFails | read-only | current | Total number of cumulative SUBTRACT commands failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.4 | ColumncmedxCmdNumSubtractSucceeds | read-only | current | Total number of cumulative SUBTRACT commands succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.5 | ColumncmedxCmdNumMoveFails | read-only | current | Total number of cumulative MOVE commands failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.6 | ColumncmedxCmdNumMoveSucceeds | read-only | current | Total number of cumulative MOVE commands succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.7 | ColumncmedxCmdNumModifyFails | read-only | current | Total number of cumulative MODIFY commands failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.8 | ColumncmedxCmdNumModifySucceeds | read-only | current | Total number of cumulative MODIFY commands succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.9 | ColumncmedxCmdNumAuditValFails | read-only | current | Total number of cumulative AUDIT VALUE commands failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.10 | ColumncmedxCmdNumAuditValSucceeds | read-only | current | Total number of cumulative AUDIT VALUE commands succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.11 | ColumncmedxCmdNumAuditCapFails | read-only | current | Total number of cumulative AUDIT CAPABILITY commands failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.12 | ColumncmedxCmdNumAuditCapSucceeds | read-only | current | Total number of cumulative AUDIT CAPABILITY commands succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.13 | ColumncmedxCmdNumNotifyFails | read-only | current | Total number of cumulative NOTIFY commands failed to respond from MGC. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.14 | ColumncmedxCmdNumNotifySucceeds | read-only | current | Total number of cumulative NOTIFY commands successfully responded from the MGC. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.15 | ColumncmedxCmdNumSrvChgFromMgcFails | read-only | current | Total number of cumulative ServiceChange commands from MGC to MG failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.16 | ColumncmedxCmdNumSrvChgFromMgcSucceeds | read-only | current | Total number of cumulative ServiceChange commands from MGC to MG succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.17 | ColumncmedxCmdNumSrvChgFromMgFails | read-only | current | Total number of cumulative ServiceChange commands from MG to MGC failed in MGC. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.18 | ColumncmedxCmdNumSrvChgFromMgSucceeds | read-only | current | Total number of cumulative ServiceChange commands from MG to MGC succeeded in MGC. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.19 | ColumncmedxCmdTotalFails | read-only | current | Total number of commands failed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.20 | ColumncmedxCmdTotalSucceeds | read-only | current | Total number of commands succeeded in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.21 | ColumncmedxCmdTotal | read-only | current | Total number of failed and successful commands in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.22 | ColumncmedxCmdNumAddPendings | read-only | current | Total number of cumulative ADD commands remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.23 | ColumncmedxCmdNumSubtractPendings | read-only | current | Total number of cumulative SUBTRACT commands remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.24 | ColumncmedxCmdNumMovePendings | read-only | current | Total number of cumulative MOVE commands remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.25 | ColumncmedxCmdNumModifyPendings | read-only | current | Total number of cumulative MODIFY commands remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.26 | ColumncmedxCmdNumAuditValPendings | read-only | current | Total number of cumulative AUDIT VALUE commands remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.27 | ColumncmedxCmdNumAuditCapPendings | read-only | current | Total number of cumulative AUDIT CAPABILITY commands remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.28 | ColumncmedxCmdNumNotifyPendings | read-only | current | Total number of cumulative NOTIFY commands remain pending in response from MGC. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.29 | ColumncmedxCmdNumSrvChgFromMgcPendings | read-only | current | Total number of cumulative ServiceChange commands from MGC to MG remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.30 | ColumncmedxCmdNumSrvChgFromMgPendings | read-only | current | Total number of cumulative ServiceChange commands from MG to MGC remain pending in MGC. |
| 1.3.6.1.4.1.9.10.104.1.2.2.1.31 | ColumncmedxCmdTotalPendings | read-only | current | Total number of commands remain pending in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3 | TablecmedxContextStatsTable | not-accessible | current | This table provides the H.248 Context related statistics for the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1 | RowcmedxContextStatsEntry | not-accessible | current | The system creates one entry for each media gateway link when it is created. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.1 | ColumncmedxCntxNumActiveContexts | read-only | current | The current number of active contexts in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.2 | ColumncmedxCntxPeakNumActiveContexts | read-only | current | Peak number of active contexts in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.3 | ColumncmedxCntxNumContextAllocated | read-only | current | Total number of contexts has been allocated in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.4 | ColumncmedxCntxNumContextFreed | read-only | current | Total number of contexts has been freed in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.5 | ColumncmedxCntxShortestContextLife | read-only | current | The shortest life span for the contexts in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.6 | ColumncmedxCntxAverageContextLife | read-only | current | The average life span for the contexts in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.7 | ColumncmedxCntxLongestContextLife | read-only | current | The longest life span for the contexts in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.3.1.8 | ColumncmedxCntxNumCntxMoreThan2Terms | read-only | current | The number of contexts having more than 2 terminations in the media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.4 | TablecmedxPhysicalTermStatsTable | not-accessible | current | This table contains statistics related to physical terminations in a media gateway. |
| 1.3.6.1.4.1.9.10.104.1.2.4.1 | RowcmedxPhysicalTermStatsEntry | not-accessible | current | Each entry contains the statistics for a physical termination in the media gateway. |
| 1.3.6.1.4.1.9.10.104.1.2.4.1.1 | ColumncmedxPhyTermStatsNumAdds | read-only | current | Number of total ADD commands on this physical termination. |
| 1.3.6.1.4.1.9.10.104.1.2.4.1.2 | ColumncmedxPhyTermStatsNumFailures | read-only | current | Number of total command failures on this physical termination. |
| 1.3.6.1.4.1.9.10.104.1.2.4.1.3 | ColumncmedxPhyTermStatsOosFromMgcs | read-only | current | Number of total out of service initiated from MGC on this physical termination. |
| 1.3.6.1.4.1.9.10.104.1.2.4.1.4 | ColumncmedxPhyTermStatsOosFromOams | read-only | current | Number of total out of service initiated from OAM (Operation Administration Management, either MG or NMS) on this physical termination. |
| 1.3.6.1.4.1.9.10.104.1.2.5 | TablecmedxEphemeralTermStatsTable | not-accessible | current | This table contains statistics related to ephemeral terminations. |
| 1.3.6.1.4.1.9.10.104.1.2.5.1 | RowcmedxEphemeralTermStatsEntry | not-accessible | current | Each entry contains the statistics of all ephemeral terminations for the termination type. |
| 1.3.6.1.4.1.9.10.104.1.2.5.1.1 | ColumncmedxEphTermStatsType | not-accessible | current | This object specifies the statistics of the termination type to be retrieved. all (1) - Statistics for all ephemeral termination types. scn (2) - Statistics fo… |
| 1.3.6.1.4.1.9.10.104.1.2.5.1.2 | ColumncmedxEphTermStatsNumAdds | read-only | current | Number of total ADD commands has been initiated on this termination type. |
| 1.3.6.1.4.1.9.10.104.1.2.5.1.3 | ColumncmedxEphTermStatsNumFailures | read-only | current | Number of total command failures on this termination type. |
| 1.3.6.1.4.1.9.10.104.1.2.6 | TablecmedxCommandProcStatsTable | not-accessible | current | This table provides the statistics related to H.248 command processing on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1 | RowcmedxCommandProcStatsEntry | not-accessible | current | The information in each entry is for a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.1 | ColumncmedxCmdPhyTermAddRespTimeMin | read-only | current | The minimum add response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.2 | ColumncmedxCmdPhyTermAddRespTimeMax | read-only | current | The maximum add response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.3 | ColumncmedxCmdPhyTermAddRespTimeAvg | read-only | current | The average add response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.4 | ColumncmedxCmdPhyTermAddRespTimeCount | read-only | current | The number of add responses for physical terminations which have been sent during the statistics interval on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.5 | ColumncmedxCmdPhyTermModRespTimeMin | read-only | current | The minimum modify response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.6 | ColumncmedxCmdPhyTermModRespTimeMax | read-only | current | The maximum modify response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.7 | ColumncmedxCmdPhyTermModRespTimeAvg | read-only | current | The average modify response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.8 | ColumncmedxCmdPhyTermModRespTimeCount | read-only | current | The number of modify responses for physical terminations which have been sent during the statistics interval on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.9 | ColumncmedxCmdPhyTermSubRespTimeMin | read-only | current | The minimum subtract response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.10 | ColumncmedxCmdPhyTermSubRespTimeMax | read-only | current | The maximum subtract response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.11 | ColumncmedxCmdPhyTermSubRespTimeAvg | read-only | current | The average subtract response time (ms) for physical terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.12 | ColumncmedxCmdPhyTermSubRespTimeCount | read-only | current | The number of subtract responses for physical terminations which have been sent during the statistics interval on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.13 | ColumncmedxCmdEphTermAddRespTimeMin | read-only | current | The minimum add response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.14 | ColumncmedxCmdEphTermAddRespTimeMax | read-only | current | The maximum add response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.15 | ColumncmedxCmdEphTermAddRespTimeAvg | read-only | current | The average add response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.16 | ColumncmedxCmdEphTermAddRespTimeCount | read-only | current | The number of add responses for ephemeral terminations which have been sent during the statistics interval on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.17 | ColumncmedxCmdEphTermModRespTimeMin | read-only | current | The minimum modify response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.18 | ColumncmedxCmdEphTermModRespTimeMax | read-only | current | The maximum modify response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.19 | ColumncmedxCmdEphTermModRespTimeAvg | read-only | current | The average modify response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.20 | ColumncmedxCmdEphTermModRespTimeCount | read-only | current | The number of modify responses for ephemeral terminations which have been sent during the statistics interval on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.21 | ColumncmedxCmdEphTermSubRespTimeMin | read-only | current | The minimum subtract response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.22 | ColumncmedxCmdEphTermSubRespTimeMax | read-only | current | The maximum subtract response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.23 | ColumncmedxCmdEphTermSubRespTimeAvg | read-only | current | The average subtract response time (ms) for ephemeral terminations on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.24 | ColumncmedxCmdEphTermSubRespTimeCount | read-only | current | The number of subtract responses for ephemeral terminations which have been sent during the statistics interval on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.25 | ColumncmedxCmdNumInProgCmds | read-only | current | The number of in-progress commands on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.26 | ColumncmedxCmdMaxInProgCmds | read-only | current | The maximum number of in-progress commands on a media gateway link. |
| 1.3.6.1.4.1.9.10.104.1.2.6.1.27 | ColumncmedxCmdSinceLastReset | read-only | current | The elapsed time (in seconds) from the last periodic reset. All (non-accumulator) statistic objects were zeroed on the last reset. |
| 1.3.6.1.4.1.9.10.104.1.2.7 | TablecmedxOverloadStatsTable | not-accessible | current | This table contains statistics related to gateway overload control (H.248.11). |
| 1.3.6.1.4.1.9.10.104.1.2.7.1 | RowcmedxOverloadStatsEntry | not-accessible | current | Each entry contains the statistics of gateway overload control. |
| 1.3.6.1.4.1.9.10.104.1.2.7.1.1 | ColumncmedxOverloadEnterCounts | read-only | current | The number of times that the gateway enters the overload condition because of any of CAC monitoring resources has exceeded the medium threshold specified by th… |
| 1.3.6.1.4.1.9.10.104.1.2.7.1.2 | ColumncmedxOverloadExitCounts | read-only | current | The number of times that the gateway exits the overload condition when all of CAC monitoring resources have fallen below the low threshold specified by the val… |
| 1.3.6.1.4.1.9.10.104.1.2.7.1.3 | ColumncmedxOverloadCurrentState | read-only | current | This object indicates the current overload state of the gateway. normal - In normal condition. overload - In overload condition. |
| 1.3.6.1.4.1.9.10.104.1.2.7.1.4 | ColumncmedxOverloadLastResetTime | read-only | current | This object contains the value of sysUpTime when the last counter reset occurred by setting cmedxOverloadCountersClear to 'true'. If no counter reset has occur… |
| 1.3.6.1.4.1.9.10.104.1.2.7.1.5 | ColumncmedxOverloadCountersClear | read-write | current | When this object is to set value of true(1), all statistics counters in the table cmedxOverloadStatsTable will be reset to zero. Setting this object to a value… |
| 1.3.6.1.4.1.9.10.104.1.2.8 | TablecmedxOverloadResourceStatsTable | not-accessible | current | This table contains the statistics of the resource utilization when the gateway enters overload condition. |
| 1.3.6.1.4.1.9.10.104.1.2.8.1 | RowcmedxOverloadResourceStatsEntry | not-accessible | current | Each entry contains the utilization statistics of the resource when the gateway is overloaded. |
| 1.3.6.1.4.1.9.10.104.1.2.8.1.1 | ColumncmedxOverloadRsResourceIndex | not-accessible | current | This object uniquely identifies the utilization of the resource is monitored for the gateway overload. The value of 0 is to sum the individual statistical coun… |
| 1.3.6.1.4.1.9.10.104.1.2.8.1.2 | ColumncmedxOverloadRsHighCounts | read-only | current | The accumulated number of times that the utilization of the resource is above the high threshold specified by ccacSysRpHighThreshold when the gateway enters th… |
| 1.3.6.1.4.1.9.10.104.1.2.8.1.3 | ColumncmedxOverloadRsMedCounts | read-only | current | The accumulated number of times that the utilization of the resource is above the medium threshold specified by ccacSysRpMedThreshold when the gateway enters t… |
| 1.3.6.1.4.1.9.10.104.1.2.8.1.4 | ColumncmedxOverloadRsLowCounts | read-only | current | The accumulated number of times that the utilization of the resource is above the low threshold specified by ccacSysRpLowThreshold when the gateway enters the … |
| 1.3.6.1.4.1.9.10.104.1.2.8.1.5 | ColumncmedxOverloadContributorCounts | read-only | current | The accumulated number of times the CAC monitoring resource causes the gateway entering the overload condition since the last counter reset. |
| 1.3.6.1.4.1.9.10.104.1.2.8.1.6 | ColumncmedxOverloadRsLastResetTime | read-only | current | This object contains the value of sysUpTime when the last counter reset occurred by setting cmedxOverloadRsCountersClear to 'true'. If no counter reset has occ… |
| 1.3.6.1.4.1.9.10.104.1.2.8.1.7 | ColumncmedxOverloadRsCountersClear | read-write | current | When this object is to set value of true(1), all statistics counters in the table cmedxOverloadResourceStatsTable will be reset to zero. Setting this object to… |
| 1.3.6.1.4.1.9.10.104.1.2.9 | TablecmedxEphemeralTermStatsInfoTable | not-accessible | current | This table contains statistics information related to ephemeral terminations. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1 | RowcmedxEphemeralTermStatsInfoEntry | not-accessible | current | Each entry contains the ephemeral termination statistics inforamtion for a specific level. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.1 | ColumncmedxEphTermInfoStatsIndex | not-accessible | current | This object uniquely identifies the entry to store ephemeral termination statistics information. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.2 | ColumncmedxEphTermInfoStatsIndexType | read-only | current | This object is used to indicate index ('cmedxEphTermInfoStatsIndex') type. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.3 | ColumncmedxEphTermInfoNumTerm | read-only | current | The accumulated number of ephemeral termination. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.4 | ColumncmedxEphTermInfoNumInUsed | read-only | current | The number of ephemeral termination currently in use. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.5 | ColumncmedxEphTermInfoMaxNumInUsed | read-only | current | The high watermark of number of ephemeral termination in use. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.6 | ColumncmedxEphTermInfoMinDuration | read-only | current | The minimum duration of ephemeral termination. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.7 | ColumncmedxEphTermInfoMaxDuration | read-only | current | The maximum duration of ephemeral termination. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.8 | ColumncmedxEphTermInfoAvgDuration | read-only | current | The average duration of ephemeral termination. |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.9 | ColumncmedxEphTermInfoCounterClear | read-write | current | When this object is set to value of true(1), all statistics counters with type of Counter32SinceReset in this table will be reset to zero. Setting this object … |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.10 | ColumncmedxEphTermInfoSinceLastClear | read-only | current | The elapsed time from the last counter clear. The following objects are set to zero on the last counter clear: 'cmedxEphTermInfoNumTerm' |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.11 | ColumncmedxEphTermInfoSinceLastReset | read-only | current | The elapsed time from the last reset. The following objects are set to zero on the last reset: 'cmedxEphTermInfoNumInUsed' 'cmedxEphTermInfoMaxNumInUsed' 'cmed… |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.12 | ColumncmedxEphTermIndexInfo | read-only | current | This object is used to store the index ('cmedxEphTermInfoStatsIndex') related information. Example: for bpvc ('cmedxEphTermInfoStatsIndexType'), the vpi and vc… |
| 1.3.6.1.4.1.9.10.104.1.2.9.1.13 | ColumncmedxEphTermInfoNumFreed | read-only | current | Total number of ephemeral terminations that have been freed. |
| 1.3.6.1.4.1.9.10.104.2 | NodeciscoMegacoExtConformance | |||
| 1.3.6.1.4.1.9.10.104.2.1 | NodecmedxCompliances | |||
| 1.3.6.1.4.1.9.10.104.2.1.1 | CompliancecmedxCompliance | deprecated | Compliance statement for entities which implement the CiSCO-MEGACO-EXT-MIB. This has been replaced by cmedxComplianceRev1 | |
| 1.3.6.1.4.1.9.10.104.2.1.2 | CompliancecmedxComplianceRev1 | deprecated | Compliance statement for entities which implement the CiSCO-MEGACO-EXT-MIB. This has been replaced by cmedxComplianceRev2. | |
| 1.3.6.1.4.1.9.10.104.2.1.3 | CompliancecmedxComplianceRev2 | deprecated | Compliance statement for entities which implement the CiSCO-MEGACO-EXT-MIB. | |
| 1.3.6.1.4.1.9.10.104.2.1.4 | CompliancecmedxComplianceRev3 | deprecated | Compliance statement for entities which implement the CiSCO-MEGACO-EXT-MIB. | |
| 1.3.6.1.4.1.9.10.104.2.1.5 | CompliancecmedxComplianceRev4 | current | Compliance statement for entities which implement the CiSCO-MEGACO-EXT-MIB. | |
| 1.3.6.1.4.1.9.10.104.2.2 | NodecmedxGroups | |||
| 1.3.6.1.4.1.9.10.104.2.2.1 | GroupcmedxConfigGroup | deprecated | This group contains of all the configuration extended information for a media gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.2 | GroupcmedxStatsGroup | deprecated | This group contains of all the statistics information for the statistics in a media gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.3 | GroupcmedxCallReduceRateGroup | current | This group contains objects used to manage and/or monitor the rate at which call attempts are made by Media gateway controller on this Media Gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.4 | GroupcmedxCodecNegotiationGroup | current | This group contains objects used for CODEC negotiation between MG and MGC. | |
| 1.3.6.1.4.1.9.10.104.2.2.5 | GroupcmedxConfigExtGroup | current | This group contains of the objects related to Megaco message size provisioning and BellCore standard COT a media gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.6 | GroupcmedxServiceStateGroup | current | This group contains of the objects to change the service state of a media gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.7 | GroupcmedxConfigGroupRev1 | deprecated | This group contains of all the configuration extended information for a media gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.8 | GroupcmedxCallReduceRateNotifyGroup | current | This group contains objects used for H.248.10 congestion control notification. | |
| 1.3.6.1.4.1.9.10.104.2.2.9 | GroupcmedxOverloadControlGroup | current | This group contains objects used for H.248.11 overload control package. | |
| 1.3.6.1.4.1.9.10.104.2.2.10 | GroupcmedxOverloadStatsGroup | current | This group contains objects used for the statistics of H.248.11 overload control. | |
| 1.3.6.1.4.1.9.10.104.2.2.11 | GroupcmedxStatsExtGroup | current | This group contains objects related to the extended statistics of H.248. | |
| 1.3.6.1.4.1.9.10.104.2.2.12 | GroupcmedxEphemeralTermStatsGroup | current | This group contains objects related to ephemeral termination statistics of H.248. | |
| 1.3.6.1.4.1.9.10.104.2.2.13 | GroupcmedxConfigGroupRev2 | current | This group contains of all the configuration extended information for a media gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.14 | GroupcmedxStatsGroupRev1 | current | This group contains of all the statistics information for the statistics in a media gateway. | |
| 1.3.6.1.4.1.9.10.104.2.2.15 | GroupcmedxConfigDomainInfoGroup | current | This group specifies the domain name and port configuration for a media gateway. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CH248Packages | BITS { pkgG(0), pkgRoot(1), pkgToneGen(2), pkgToneDet(3), pkgDG(4), pkgDD(5), pkgCG(6), pkgCD(7), pkgCT(8), pkgNT(9), pkgRTP(10), pkgTDMC(11), pkgAN(12), pkgBCG(13), pkgXCG(14), pkgSrvTn(15), pkgXsrvTn(16), pkgChp(17), pkgIT(18), pkgLLTR(19), pkgBCAS(20), pkgRBS(21), pkgOSES(22), pkgAMET(23), pkgBCASAddr(24), pkgCASBlock(25), pkgGRI(26), rtcpxr(27), xrbm(28), qac(29), pkgDS(30), pkgETerm(31), pkgXnq(32), pkgCTYP(33), pkgIPFAX(34) } | current | This textual convention defines all possible packages in H.248 protocol. |
| CMedxCotTones | INTEGER { co1(1), co2(2) } | current | This textual convention defines the tones to be used between originating gateway and terminating gateway in the COT (Continuity Test). co1 (1) - CO1 is either 2000Hz or 2010Hz depending on the region/country regulation.… |