CISCO-PROXY-CONTROL-MIB
71 objects
This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing Proxy management information. *** ABBREVIATIONS, ACRONYMS AND SYMBOLS *** GSM - Global System for Mobile Communication AMR-NB - Adaptive Multi Rate - Narrow Band iLBC - internet Low Bitrate Codec iSAC - internet Speech Audio Codec
Imported Objects
| CISCO-DIAL-CONTROL-MIB | cCallHistoryIndex |
| CISCO-SMI | ciscoExperiment |
| CISCO-VOICE-COMMON-DIAL-CONTROL-MIB | CvcGUid |
| DIAL-CONTROL-MIB | AbsoluteCounter32 callActiveIndex callActiveSetupTime |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.57 | IdentityciscoProxyControlMIB | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing Proxy management information. *** ABBREVIATIONS, ACRONYMS AND SYMBOLS *** GSM - Globa… | ||
| 1.3.6.1.4.1.9.10.57.1 | NodeciscoProxyControlMIBObjects | |||
| 1.3.6.1.4.1.9.10.57.1.1 | NodecProxyCallActive | |||
| 1.3.6.1.4.1.9.10.57.1.1.1 | TablecProxyCallActiveTable | not-accessible | current | This table is the Proxy extension to the call Active table of IETF Dial Control MIB. It contains Proxy call leg information about specific proxied calls. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1 | RowcProxyCallActiveEntry | not-accessible | current | The information regarding a single proxied call leg. An entry of this table is created when its associated call Active entry in the IETF Dial Control MIB is cr… |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.1 | ColumncProxyCallActiveConnectionId | read-only | current | The global call identifier for the Proxy call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.2 | ColumncProxyCallActiveRemoteIPAddress | read-only | current | Remote system IP address for the call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.3 | ColumncProxyCallActiveAudioUDPPort | read-only | current | Remote system UDP listener port to which to transmit voice packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.4 | ColumncProxyCallActiveVideoUDPPort | read-only | current | Remote system UDP listener port to which to transmit video packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.5 | ColumncProxyCallActiveT120TCPPort1 | read-only | current | First remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.6 | ColumncProxyCallActiveT120TCPPort2 | read-only | current | Second remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.7 | ColumncProxyCallActiveT120TCPPort3 | read-only | current | Third remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.8 | ColumncProxyCallActiveT120TCPPort4 | read-only | current | Fourth remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.9 | ColumncProxyCallActiveEndpointType | read-only | current | The type of end point this proxy call leg is connected to. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.10 | ColumncProxyCallActiveEndpointVendor | read-only | current | The H225 Manufacturers code for this endpoint. Zero indicates unknown vendor. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.11 | ColumncProxyCallActiveRequestBandwidth | read-only | current | The requested bandwidth for this proxied call leg. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.12 | ColumncProxyCallActiveActualBandwidth | read-only | current | The actual bandwidth used by the proxied call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.13 | ColumncProxyCallActiveAudioCoderRate | read-only | current | The negotiated coder rate. It specifies the transmit rate of audio compression to its associated call leg for the call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.14 | ColumncProxyCallActiveVideoCoderRate | read-only | current | The negotiated coder rate. It specifies the transmit rate of video compression to its associated call leg for the call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.15 | ColumncProxyCallActiveRxAudioPackets | read-only | current | The number of audio packets received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.16 | ColumncProxyCallActiveRxAudioBytes | read-only | current | The number of audio bytes received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.17 | ColumncProxyCallActiveTxAudioPackets | read-only | current | The number of audio packets transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.18 | ColumncProxyCallActiveTxAudioBytes | read-only | current | The number of audio bytes transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.19 | ColumncProxyCallActiveRxVideoPackets | read-only | current | The number of video packets received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.20 | ColumncProxyCallActiveRxVideoBytes | read-only | current | The number of video bytes received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.21 | ColumncProxyCallActiveTxVideoPackets | read-only | current | The number of video packets transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.22 | ColumncProxyCallActiveTxVideoBytes | read-only | current | The number of video bytes transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.23 | ColumncProxyCallActiveRxT120Packets | read-only | current | The number of T120 data packets received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.24 | ColumncProxyCallActiveRxT120Bytes | read-only | current | The number of T120 data bytes received from the remote end of this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.25 | ColumncProxyCallActiveTxT120Packets | read-only | current | The number of T120 data packets transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.1.1.1.26 | ColumncProxyCallActiveTxT120Bytes | read-only | current | The number of T120 data bytes transmitted to the remote end of this call. |
| 1.3.6.1.4.1.9.10.57.1.2 | NodecProxyCallHistory | |||
| 1.3.6.1.4.1.9.10.57.1.2.1 | TablecProxyCallHistoryTable | not-accessible | current | This table is the Proxy extension to the History call table of IETF Dial Control MIB. It contains PROXY call leg information about proxied call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1 | RowcProxyCallHistoryEntry | not-accessible | current | The information regarding a single proxied call leg. An entry of this table is created when its associated call History entry in the IETF Dial Control MIB is c… |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.1 | ColumncProxyCallHistoryConnectionId | read-only | current | The global call identifier for the Proxy call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.2 | ColumncProxyCallHistoryRemoteIPAddress | read-only | current | Remote system IP address for the call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.3 | ColumncProxyCallHistoryAudioUDPPort | read-only | current | Remote system UDP listener port to which to transmit voice packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.4 | ColumncProxyCallHistoryVideoUDPPort | read-only | current | Remote system UDP listener port to which to transmit video packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.5 | ColumncProxyCallHistoryT120TCPPort1 | read-only | current | First remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.6 | ColumncProxyCallHistoryT120TCPPort2 | read-only | current | Second remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.7 | ColumncProxyCallHistoryT120TCPPort3 | read-only | current | Third remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.8 | ColumncProxyCallHistoryT120TCPPort4 | read-only | current | Fourth remote system UDP listener port to which to transmit T120 packets for the call. A value of zero indicates that no port was used. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.9 | ColumncProxyCallHistoryEndpointType | read-only | current | The type of end point this proxy call leg is connected to. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.10 | ColumncProxyCallHistoryEndpointVendor | read-only | current | The H225 Manufacturers code for this endpoint. Zero indicates unknown vendor. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.11 | ColumncProxyCallHistoryRequestBandwidth | read-only | current | The requested bandwidth for this proxied call leg. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.12 | ColumncProxyCallHistoryActualBandwidth | read-only | current | The actual bandwidth used by the proxied call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.13 | ColumncProxyCallHistoryAudioCoderRate | read-only | current | The negotiated coder rate. It specifies the transmit rate of audio compression to its associated call leg for the call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.14 | ColumncProxyCallHistoryVideoCoderRate | read-only | current | The negotiated coder rate. It specifies the transmit rate of video compression to its associated call leg for the call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.15 | ColumncProxyCallHistoryRxAudioPackets | read-only | current | The number of audio packets received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.16 | ColumncProxyCallHistoryRxAudioBytes | read-only | current | The number of audio bytes received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.17 | ColumncProxyCallHistoryTxAudioPackets | read-only | current | The number of audio packets transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.18 | ColumncProxyCallHistoryTxAudioBytes | read-only | current | The number of audio bytes transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.19 | ColumncProxyCallHistoryRxVideoPackets | read-only | current | The number of video packets received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.20 | ColumncProxyCallHistoryRxVideoBytes | read-only | current | The number of video bytes received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.21 | ColumncProxyCallHistoryTxVideoPackets | read-only | current | The number of video packets transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.22 | ColumncProxyCallHistoryTxVideoBytes | read-only | current | The number of video bytes transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.23 | ColumncProxyCallHistoryRxT120Packets | read-only | current | The number of T120 data packets received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.24 | ColumncProxyCallHistoryRxT120Bytes | read-only | current | The number of T120 data bytes received from the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.25 | ColumncProxyCallHistoryTxT120Packets | read-only | current | The number of T120 data packets transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.1.2.1.1.26 | ColumncProxyCallHistoryTxT120Bytes | read-only | current | The number of T120 data bytes transmitted to the remote end for this call. |
| 1.3.6.1.4.1.9.10.57.2 | NodeciscoProxyControlMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.10.57.2.0 | NodeciscoProxyControlMIBNotifications | |||
| 1.3.6.1.4.1.9.10.57.3 | NodeciscoProxyControlMIBConformance | |||
| 1.3.6.1.4.1.9.10.57.3.1 | NodeciscoProxyControlMIBCompliances | |||
| 1.3.6.1.4.1.9.10.57.3.1.1 | ComplianceciscoProxyControlMIBCompliance | current | The compliance statement for entities which implement the CISCO PROXY CONTROL MIB | |
| 1.3.6.1.4.1.9.10.57.3.2 | NodeciscoProxyControlMIBGroups | |||
| 1.3.6.1.4.1.9.10.57.3.2.1 | GroupcProxyCallActiveGroup | current | A collection of objects providing the PROXY Call Active entry capability. | |
| 1.3.6.1.4.1.9.10.57.3.2.2 | GroupcProxyCallHistoryGroup | current | A collection of objects providing the PROXY Call Active entry capability. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CProxyAudioCodec | INTEGER { other(0), nonStandard(1), g711Alawr64k(2), g711Alawr56k(3), g711Ulawr64k(4), g711Ulawr56k(5), g722r64k(6), g722r56k(7), g722r48k(8), g7231(9), g728(10), g729(11), g729AnnexA(12), is11172(13), is13818(14), g729AnnexB(15), g729AnnexAB(16), g729AnnexC(17), gsmFullRate(18), gsmHalfRate(19), gsmEnhancedFullRate(20), gsmAmrNb(21), iLBC(22), iSAC(23) } | current | A tag to identify the type of encoding used to compress the voice data of the call. iLBC - iILBC 13330 or 15200 bps iSAC - iSAC 10 to 32 kbps |
| CProxyEndptType | INTEGER { other(0), proxy(1), gateway(2) } | current | A tag to identify the type of end point that the Proxy is connected to. |
| CProxyVideoCodec | INTEGER { other(0), nonStandard(1), h261(2), h262(3), h263(4), is11172(5) } | current | A tag to identify the type of encoding used to compress the video data of the call. |