CM-ENTITY-MIB
848 objects
This module defines the Entity MIB definitions used by the F3 (FSP150CM/CC) product lines. These definitions are vendor specific extensions to the standard ENTITY MIB (RFC2737). Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | AdminState CmPmIntervalType OperationalState RestartType SecondaryState TDMFrequencySourceType VlanId |
| CM-SYSTEM-MIB | CmAutoProvMode |
| ENTITY-MIB | PhysicalIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.3 | IdentitycmEntityMIB | This module defines the Entity MIB definitions used by the F3 (FSP150CM/CC) product lines. These definitions are vendor specific extensions to the standard ENT… | ||
| 1.3.6.1.4.1.2544.1.12.3.1 | NodecmEntityObjects | |||
| 1.3.6.1.4.1.2544.1.12.3.1.1 | TablenetworkElementTable | not-accessible | current | Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1 | RownetworkElementEntry | not-accessible | current | A conceptual row in the networkElementTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.1 | ColumnneIndex | read-only | current | An arbitrary integer index value used to uniquely identify a NetworkElement. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.2 | ColumnneName | read-create | current | An administratively-assigned name for the Network Element. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.3 | ColumnneType | read-create | current | Type of Network Element. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.4 | ColumnneContact | read-create | current | The textual identification of the contact person for the Network Element, together with information on how to contact this person. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.5 | ColumnneLocation | read-create | current | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.6 | ColumnneDescription | read-only | current | A textual description of the Network Element. This value should include the full name and version identification of the system's hardware type, software operat… |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.7 | ColumnneCmdPromptPrefix | read-create | current | User specified command prompt prefix, used by the CLI, at the Network Element level. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.8 | ColumnneAccepted | read-only | current | Indicates whether or not the Network Element is accepted or not. When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered wi… |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.9 | ColumnneFromPort | read-create | current | The Network Element port to which this Network Element is connected. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.10 | ColumnneProvAction | read-write | current | When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with 'neAccepted' object as 'false'. User must invoke the 'accept' … |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.11 | ColumnneStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.12 | ColumnneRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.13 | ColumnneAutoProvMode | read-create | current | Autoprovisioning mode which controls automatic creation of cards plugged into the slots of Network Element. Supported values are off(1) and auto(3). When neAut… |
| 1.3.6.1.4.1.2544.1.12.3.1.1.1.14 | ColumnneFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the Network Element level. Value of this objec is propagated to all the cards beloning to the Network E… |
| 1.3.6.1.4.1.2544.1.12.3.1.2 | TableshelfTable | not-accessible | current | Contains information on shelf within the NetworkElement. In the case of FSP150CM, there is a single shelf for each NetworkElement. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1 | RowshelfEntry | not-accessible | current | A conceptual row in the shelfTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.1 | ColumnshelfIndex | read-only | current | An integer index value used to uniquely identify a Shelf within a NetworkElement. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.2 | ColumnshelfEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.3 | ColumnshelfType | read-write | current | Shelf Type of the shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.4 | ColumnshelfbackplaneRev | read-only | current | The backplane revision number. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.5 | ColumnshelfbackplaneDOM | read-only | current | Backplane Date of Manufacture. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.6 | ColumnshelfbackplaneSerialNo | read-only | current | Backplane Serial Number. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.7 | ColumnshelfAction | read-write | current | Invoke action on the shelf, such as lamp test. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.8 | ColumnshelfAdminState | read-write | current | Administrative State of the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.9 | ColumnshelfOperationalState | read-only | current | Operational State of the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.10 | ColumnshelfSecondaryState | read-only | current | Secondary State of the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.11 | ColumnshelfMfgSite | read-only | current | This is the shelf's Manufacturer site. |
| 1.3.6.1.4.1.2544.1.12.3.1.2.1.12 | ColumnshelfOscillatorType | read-only | current | The mOscillatorType. |
| 1.3.6.1.4.1.2544.1.12.3.1.3 | TableslotTable | not-accessible | current | Contains information on slot within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1 | RowslotEntry | not-accessible | current | A conceptual row in the slotTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.1 | ColumnslotIndex | read-only | current | The actual physical slot index that uniquely identify a Slot within a shelf. Slot number 255 is used to indicate system level entities. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.2 | ColumnslotEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this slot. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.3 | ColumnslotType | read-only | current | Slot Type of the slot. 'generic' slots can hold NEMI card as well as line cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.4 | ColumnslotCardType | read-only | current | Card Type of the slot. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.5 | ColumnslotCardUnitName | read-only | current | This is the inserted card's unit name. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.6 | ColumnslotCardFormatVersion | read-only | current | This is the inserted card's format version. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.7 | ColumnslotCardCLEICode | read-only | current | This is the inserted card's CLEI code. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.8 | ColumnslotCardPartNumber | read-only | current | This is the inserted card's Part Number. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.9 | ColumnslotCardHwRev | read-only | current | This is the inserted card's Hardware Revision. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.10 | ColumnslotCardSwRev | read-only | current | This is the inserted card's Software Revision. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.11 | ColumnslotCardSerialNum | read-only | current | This is the inserted card's Serial Number. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.12 | ColumnslotCardMfgName | read-only | current | This is the inserted card's Manufacturer Name. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.13 | ColumnslotCardMfgDate | read-only | current | This is the inserted card's Manufacturer date. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.14 | ColumnslotCardMfgSite | read-only | current | This is the inserted card's Manufacturer site. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.15 | ColumnslotSecondaryState | read-only | current | Secondary State of the Slot. |
| 1.3.6.1.4.1.2544.1.12.3.1.3.1.16 | ColumnslotCardPhysicalAddress | read-only | current | This is the inserted card's MAC Address, if applicable. |
| 1.3.6.1.4.1.2544.1.12.3.1.4 | TablepsuTable | not-accessible | current | Contains information on Power Supply Units within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1 | RowpsuEntry | not-accessible | current | A conceptual row in the psuTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.1 | ColumnpsuEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.2 | ColumnpsuType | read-only | current | PSU Type of the PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.3 | ColumnpsuAdminState | read-write | current | Administrative State of the PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.4 | ColumnpsuOperationalState | read-only | current | Operational State of the PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.5 | ColumnpsuSecondaryState | read-only | current | Secondary State of the PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.6 | ColumnpsuOutputVoltage | read-only | current | Output Voltage of the PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.7 | ColumnpsuTemperature | read-only | current | Temperature of the PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.8 | ColumnpsuOutputCurrent | read-only | current | Output Current of the PSU. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.9 | ColumnpsuStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.4.1.10 | ColumnpsuRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.5 | TablefanTable | not-accessible | current | Contains information on FANs within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.5.1 | RowfanEntry | not-accessible | current | A conceptual row in the fanTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.5.1.1 | ColumnfanEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this FAN. |
| 1.3.6.1.4.1.2544.1.12.3.1.5.1.2 | ColumnfanAdminState | read-write | current | Administrative State of the FAN. |
| 1.3.6.1.4.1.2544.1.12.3.1.5.1.3 | ColumnfanOperationalState | read-only | current | Operational State of the FAN. |
| 1.3.6.1.4.1.2544.1.12.3.1.5.1.4 | ColumnfanSecondaryState | read-only | current | Secondary State of the FAN. |
| 1.3.6.1.4.1.2544.1.12.3.1.5.1.5 | ColumnfanStorageType | read-create | current | Storage Type of the FAN. |
| 1.3.6.1.4.1.2544.1.12.3.1.5.1.6 | ColumnfanRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.6 | TablescuTable | not-accessible | current | Contains information on SCU within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1 | RowscuEntry | not-accessible | current | A conceptual row in the scuTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.1 | ColumnscuEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the SCU card. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.2 | ColumnscuAdminState | read-write | current | Administrative State of the SCU. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.3 | ColumnscuOperationalState | read-only | current | Operational State of the SCU. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.4 | ColumnscuSecondaryState | read-only | current | Secondary State of the SCU. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.5 | ColumnscuVoltage | read-only | current | Voltage of the SCU. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.6 | ColumnscuTemperature | read-only | current | Temperature of the SCU. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.7 | ColumnscuRestartAction | read-write | current | Allows to perform specified action on the SCU card. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.8 | ColumnscuStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.9 | ColumnscuRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.10 | ColumnscuFlashModelNum | read-only | current | This provides the Compact Flash Model Number on the SCU card. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.11 | ColumnscuFlashFirmwareRev | read-only | current | This provides the Compact Flash Firmware Revision on the SCU card. |
| 1.3.6.1.4.1.2544.1.12.3.1.6.1.12 | ColumnscuFlashSerialNum | read-only | current | This provides the Compact Flash Serial Number on the SCU card. |
| 1.3.6.1.4.1.2544.1.12.3.1.7 | TablenemiTable | not-accessible | current | Contains information on NEMI within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1 | RownemiEntry | not-accessible | current | A conceptual row in the nemiTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.1 | ColumnnemiEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the NEMI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.2 | ColumnnemiAdminState | read-write | current | Administrative State of the NEMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.3 | ColumnnemiOperationalState | read-only | current | Operational State of the NEMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.4 | ColumnnemiSecondaryState | read-only | current | Secondary State of the NEMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.5 | ColumnnemiVoltage | read-only | current | Voltage of the NEMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.6 | ColumnnemiTemperature | read-only | current | Temperature of the NEMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.7 | ColumnnemiRestartAction | read-write | current | Allows to perform specified action on the NEMI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.8 | ColumnnemiStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.9 | ColumnnemiRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.10 | ColumnnemiForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.11 | ColumnnemiFlashModelNum | read-only | current | This provides the Flash Model Number on the NEMI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.12 | ColumnnemiFlashFirmwareRev | read-only | current | This provides the Flash Firmware Revision on the NEMI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.7.1.13 | ColumnnemiFlashSerialNum | read-only | current | This provides the Flash Serial Number on the NEMI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8 | TableethernetNTUCardTable | not-accessible | current | Contains information on Ethernet NTU Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1 | RowethernetNTUCardEntry | not-accessible | current | A conceptual row in the ethernetNTUCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.1 | ColumnethernetNTUCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.2 | ColumnethernetNTUCardAdminState | read-write | current | Administrative State of the Ethernet NTU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.3 | ColumnethernetNTUCardOperationalState | read-only | current | Operational State of the Ethernet NTU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.4 | ColumnethernetNTUCardSecondaryState | read-only | current | Secondary State of the Ethernet NTU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.5 | ColumnethernetNTUCardVoltage | read-only | current | Voltage of the Ethernet NTU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.6 | ColumnethernetNTUCardTemperature | read-only | current | Temperature of the Ethernet NTU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.7 | ColumnethernetNTUCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.8 | ColumnethernetNTUCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTU card. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.9 | ColumnethernetNTUCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.8.1.10 | ColumnethernetNTUCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.9 | TableethernetCPMRCardTable | not-accessible | current | Contains information on Ethernet CPMR Cards within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1 | RowethernetCPMRCardEntry | not-accessible | current | A conceptual row in the ethernetCPMRCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.1 | ColumnethernetCPMRCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet CPMR Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.2 | ColumnethernetCPMRCardAdminState | read-write | current | Administrative State of the Ethernet CPMR Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.3 | ColumnethernetCPMRCardOperationalState | read-only | current | Operational State of the Ethernet CPMR Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.4 | ColumnethernetCPMRCardSecondaryState | read-only | current | Secondary State of the Ethernet CPMR Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.5 | ColumnethernetCPMRCardVoltage | read-only | current | Voltage of the Ethernet CPMR Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.6 | ColumnethernetCPMRCardTemperature | read-only | current | Temperature of the Ethernet CPMR Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.7 | ColumnethernetCPMRCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet CPMR card. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.8 | ColumnethernetCPMRCardPSU1State | read-only | current | Operational State of Power Supply Unit 1 on Ethernet CPMR chassis. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.9 | ColumnethernetCPMRCardPSU2State | read-only | current | Operational State of Power Supply Unit 2 on Ethernet CPMR chassis. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.10 | ColumnethernetCPMRCardFAN1State | read-only | current | Operational State of FAN 1 on Ethernet CPMR chassis. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.11 | ColumnethernetCPMRCardFAN2State | read-only | current | Operational State of FAN 2 on Ethernet CPMR chassis. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.12 | ColumnethernetCPMRCardPsuType | read-only | current | PSU Type on Ethernet CPMR chassis. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.13 | ColumnethernetCPMRCardLLFMode | read-only | current | Current Link Loss Forwarding Mode on CPMR. |
| 1.3.6.1.4.1.2544.1.12.3.1.9.1.14 | ColumnethernetCPMRCardLLFModeAction | read-write | current | Operation to set the appropriate mode on CPMR. |
| 1.3.6.1.4.1.2544.1.12.3.1.10 | TableethernetNTEGE101CardTable | not-accessible | current | Contains information on Ethernet NTE GE101 Cards. These are supported on the FSP150CC GE101 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1 | RowethernetNTEGE101CardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE101CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.1 | ColumnethernetNTEGE101CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.2 | ColumnethernetNTEGE101CardAdminState | read-write | current | Administrative State of the Ethernet NTE GE101 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.3 | ColumnethernetNTEGE101CardOperationalState | read-only | current | Operational State of the Ethernet NTE GE101 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.4 | ColumnethernetNTEGE101CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE101 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.5 | ColumnethernetNTEGE101CardVoltage | read-only | current | Voltage of the Ethernet NTE GE101 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.6 | ColumnethernetNTEGE101CardTemperature | read-only | current | Temperature of the Ethernet NTE GE101 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.7 | ColumnethernetNTEGE101CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE101 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.10.1.8 | ColumnethernetNTEGE101CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE101 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11 | TableethernetNTEGE206CardTable | not-accessible | current | Contains information on Ethernet NTE GE206 Cards. These are supported on the FSP150CC GE206 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1 | RowethernetNTEGE206CardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE206CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.1 | ColumnethernetNTEGE206CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.2 | ColumnethernetNTEGE206CardAdminState | read-write | current | Administrative State of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.3 | ColumnethernetNTEGE206CardOperationalState | read-only | current | Operational State of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.4 | ColumnethernetNTEGE206CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.5 | ColumnethernetNTEGE206CardVoltage | read-only | current | Voltage of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.6 | ColumnethernetNTEGE206CardTemperature | read-only | current | Temperature of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.7 | ColumnethernetNTEGE206CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.8 | ColumnethernetNTEGE206CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE206 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.11.1.9 | ColumnethernetNTEGE206CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.12 | TablepseudoWireE3CardTable | not-accessible | obsolete | Contains information on Pseudo Wire E3 (Emulation Edge to Edge) Cards. These are supported on the FSP150CC GE206 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1 | RowpseudoWireE3CardEntry | not-accessible | obsolete | A conceptual row in the pseudoWireE3CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.1 | ColumnpseudoWireE3CardEntityIndex | read-only | obsolete | Entity Index from ENTITY-MIB for the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.2 | ColumnpseudoWireE3CardAdminState | read-write | obsolete | Administrative State of the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.3 | ColumnpseudoWireE3CardOperationalState | read-only | obsolete | Operational State of the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.4 | ColumnpseudoWireE3CardSecondaryState | read-only | obsolete | Secondary State of the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.5 | ColumnpseudoWireE3CardIpAddress | read-write | obsolete | External management IP Address of the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.6 | ColumnpseudoWireE3CardIpNetmask | read-write | obsolete | External management IP Net mask of the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.7 | ColumnpseudoWireE3CardIpGateway | read-write | obsolete | External management IP Gateway of the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.8 | ColumnpseudoWireE3CardDhcpEnabled | read-write | obsolete | External management - whether DHCP is enabled. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.9 | ColumnpseudoWireE3CardMgmtVlanId | read-write | obsolete | External management VLAN Id for the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.10 | ColumnpseudoWireE3CardTimeOfDay | read-write | obsolete | Time of day for the Pseudo Wire E3 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.12.1.11 | ColumnpseudoWireE3CardRestartAction | read-write | obsolete | Allows to perform restart action on the Pseudo Wire E3 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.13 | TablescuTTable | not-accessible | current | Contains information on SCU-T within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1 | RowscuTEntry | not-accessible | current | A conceptual row in the scuTTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.1 | ColumnscuTEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the SCU-T card. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.2 | ColumnscuTAdminState | read-write | current | Administrative State of the SCU-T. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.3 | ColumnscuTOperationalState | read-only | current | Operational State of the SCU-T. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.4 | ColumnscuTSecondaryState | read-only | current | Secondary State of the SCU-T. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.5 | ColumnscuTVoltage | read-only | current | Voltage of the SCU-T. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.6 | ColumnscuTTemperature | read-only | current | Temperature of the SCU-T. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.7 | ColumnscuTRestartAction | read-write | current | Allows to perform specified action on the SCU-T card. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.8 | ColumnscuTStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.13.1.9 | ColumnscuTRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.14 | TableethernetNTECardTable | not-accessible | current | Contains information on Ethernet NTE Cards within the Shelf. These cards support 10M, 100M and 1G Ethernet Interfaces. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1 | RowethernetNTECardEntry | not-accessible | current | A conceptual row in the ethernetNTECardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.1 | ColumnethernetNTECardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.2 | ColumnethernetNTECardAdminState | read-write | current | Administrative State of the Ethernet NTE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.3 | ColumnethernetNTECardOperationalState | read-only | current | Operational State of the Ethernet NTE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.4 | ColumnethernetNTECardSecondaryState | read-only | current | Secondary State of the Ethernet NTE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.5 | ColumnethernetNTECardVoltage | read-only | current | Voltage of the Ethernet NTE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.6 | ColumnethernetNTECardTemperature | read-only | current | Temperature of the Ethernet NTE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.7 | ColumnethernetNTECardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.8 | ColumnethernetNTECardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE card. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.9 | ColumnethernetNTECardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.14.1.10 | ColumnethernetNTECardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.15 | TableethernetNTEGE201CardTable | not-accessible | current | Contains information on Ethernet NTE GE201 Cards. These are supported on the FSP150CC GE201 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1 | RowethernetNTEGE201CardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE201CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.1 | ColumnethernetNTEGE201CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE201 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.2 | ColumnethernetNTEGE201CardAdminState | read-write | current | Administrative State of the Ethernet NTE GE201 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.3 | ColumnethernetNTEGE201CardOperationalState | read-only | current | Operational State of the Ethernet NTE GE201 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.4 | ColumnethernetNTEGE201CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE201 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.5 | ColumnethernetNTEGE201CardVoltage | read-only | current | Voltage of the Ethernet NTE GE201 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.6 | ColumnethernetNTEGE201CardTemperature | read-only | current | Temperature of the Ethernet NTE GE201 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.7 | ColumnethernetNTEGE201CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.8 | ColumnethernetNTEGE201CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE201 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.15.1.9 | ColumnethernetNTEGE201CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.16 | TableethernetNTEGE201SyncECardTable | not-accessible | current | Contains information on Ethernet NTE GE201SyncE Cards. These are supported on the FSP150CC GE201SyncE product. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1 | RowethernetNTEGE201SyncECardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE201SyncECardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.1 | ColumnethernetNTEGE201SyncECardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE201SyncE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.2 | ColumnethernetNTEGE201SyncECardAdminState | read-write | current | Administrative State of the Ethernet NTE GE201SyncE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.3 | ColumnethernetNTEGE201SyncECardOperationalState | read-only | current | Operational State of the Ethernet NTE GE201SyncE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.4 | ColumnethernetNTEGE201SyncECardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE201SyncE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.5 | ColumnethernetNTEGE201SyncECardVoltage | read-only | current | Voltage of the Ethernet NTE GE201SyncE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.6 | ColumnethernetNTEGE201SyncECardTemperature | read-only | current | Temperature of the Ethernet NTE GE201SyncE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.7 | ColumnethernetNTEGE201SyncECardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201SyncE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.8 | ColumnethernetNTEGE201SyncECardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE201SyncE card. |
| 1.3.6.1.4.1.2544.1.12.3.1.16.1.9 | ColumnethernetNTEGE201SyncECardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.17 | TableethernetNTEGE206FCardTable | not-accessible | current | Contains information on Ethernet NTE GE206F Cards. These are supported on the FSP150CC GE206 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1 | RowethernetNTEGE206FCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE206FCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.1 | ColumnethernetNTEGE206FCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.2 | ColumnethernetNTEGE206FCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.3 | ColumnethernetNTEGE206FCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.4 | ColumnethernetNTEGE206FCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.5 | ColumnethernetNTEGE206FCardVoltage | read-only | current | Voltage of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.6 | ColumnethernetNTEGE206FCardTemperature | read-only | current | Temperature of the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.7 | ColumnethernetNTEGE206FCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.8 | ColumnethernetNTEGE206FCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE206 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.17.1.9 | ColumnethernetNTEGE206FCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.18 | Tableethernet1x10GCardTable | not-accessible | current | Contains information on Ethernet 1x10G Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1 | Rowethernet1x10GCardEntry | not-accessible | current | A conceptual row in the ethernet1x10GCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.1 | Columnethernet1x10GCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet 1x10G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.2 | Columnethernet1x10GCardAdminState | read-write | current | Administrative State of the Ethernet 1x10G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.3 | Columnethernet1x10GCardOperationalState | read-only | current | Operational State of the Ethernet 1x10G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.4 | Columnethernet1x10GCardSecondaryState | read-only | current | Secondary State of the Ethernet 1x10G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.5 | Columnethernet1x10GCardTemperature | read-only | current | Temperature of the Ethernet 1x10G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.6 | Columnethernet1x10GCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.7 | Columnethernet1x10GCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet 1x10G card. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.8 | Columnethernet1x10GCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.9 | Columnethernet1x10GCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.18.1.10 | Columnethernet1x10GCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.19 | Tableethernet10x1GCardTable | not-accessible | current | Contains information on Ethernet 10x1G Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1 | Rowethernet10x1GCardEntry | not-accessible | current | A conceptual row in the ethernet10x1GCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.1 | Columnethernet10x1GCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet 10x1G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.2 | Columnethernet10x1GCardAdminState | read-write | current | Administrative State of the Ethernet 10x1G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.3 | Columnethernet10x1GCardOperationalState | read-only | current | Operational State of the Ethernet 10x1G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.4 | Columnethernet10x1GCardSecondaryState | read-only | current | Secondary State of the Ethernet 10x1G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.5 | Columnethernet10x1GCardTemperature | read-only | current | Temperature of the Ethernet 10x1G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.6 | Columnethernet10x1GCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.7 | Columnethernet10x1GCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet 10x1G card. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.8 | Columnethernet10x1GCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.9 | Columnethernet10x1GCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.19.1.10 | Columnethernet10x1GCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.20 | TableethernetSWFCardTable | not-accessible | current | Contains information on Ethernet SWF Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1 | RowethernetSWFCardEntry | not-accessible | current | A conceptual row in the ethernetSWFCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.1 | ColumnethernetSWFCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet SWF Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.2 | ColumnethernetSWFCardAdminState | read-write | current | Administrative State of the Ethernet SWF Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.3 | ColumnethernetSWFCardOperationalState | read-only | current | Operational State of the Ethernet SWF Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.4 | ColumnethernetSWFCardSecondaryState | read-only | current | Secondary State of the Ethernet SWF Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.5 | ColumnethernetSWFCardTemperature | read-only | current | Temperature of the Ethernet SWF Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.6 | ColumnethernetSWFCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet SWF card. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.7 | ColumnethernetSWFCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.8 | ColumnethernetSWFCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.20.1.9 | ColumnethernetSWFCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.21 | TablestuCardTable | not-accessible | current | Contains information on STU Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1 | RowstuCardEntry | not-accessible | current | A conceptual row in the stuCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.1 | ColumnstuCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the STU Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.2 | ColumnstuCardAdminState | read-write | current | Administrative State of the Stu Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.3 | ColumnstuCardOperationalState | read-only | current | Operational State of the Stu Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.4 | ColumnstuCardSecondaryState | read-only | current | Secondary State of the Stu Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.5 | ColumnstuCardTemperature | read-only | current | Temperature of the Stu Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.6 | ColumnstuCardRestartAction | read-write | current | Allows to perform specified action on the Stu card. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.7 | ColumnstuCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.8 | ColumnstuCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.21.1.9 | ColumnstuCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.22 | TableamiTable | not-accessible | current | Contains information on AMI within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.22.1 | RowamiEntry | not-accessible | current | A conceptual row in the amiTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.22.1.1 | ColumnamiEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the AMI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.22.1.2 | ColumnamiAdminState | read-write | current | Administrative State of the AMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.22.1.3 | ColumnamiOperationalState | read-only | current | Operational State of the AMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.22.1.4 | ColumnamiSecondaryState | read-only | current | Secondary State of the AMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.22.1.5 | ColumnamiTemperature | read-only | current | Temperature of the AMI. |
| 1.3.6.1.4.1.2544.1.12.3.1.22.1.6 | ColumnamiRestartAction | read-write | current | Allows to perform specified action on the AMI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.23 | TablestiTable | not-accessible | current | Contains information on STI within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1 | RowstiEntry | not-accessible | current | A conceptual row in the stiTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1.1 | ColumnstiEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the STI card. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1.2 | ColumnstiAdminState | read-write | current | Administrative State of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1.3 | ColumnstiOperationalState | read-only | current | Operational State of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1.4 | ColumnstiSecondaryState | read-only | current | Secondary State of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1.5 | ColumnstiTemperature | read-only | current | Temperature of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1.6 | ColumnstiStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.23.1.7 | ColumnstiRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.24 | Tablef3UsbHostTable | not-accessible | current | Contains information on Usb Host. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1 | Rowf3UsbHostEntry | not-accessible | current | A conceptual row in the f3UsbHostTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.1 | Columnf3UsbHostIndex | read-only | current | The actual physical usb host index that uniquely identify a usb host. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.2 | Columnf3UsbHostEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the usb host. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.3 | Columnf3UsbHostUnitName | read-only | current | This is the inserted usb device's unit name. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.4 | Columnf3UsbHostFormatVersion | read-only | current | This is the inserted usb device's format version. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.5 | Columnf3UsbHostCLEICode | read-only | current | This is the inserted usb device's CLEI code. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.6 | Columnf3UsbHostPartNumber | read-only | current | This is the inserted usb device's Part Number. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.7 | Columnf3UsbHostHwRev | read-only | current | This is the inserted usb device's Hardware Revision. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.8 | Columnf3UsbHostSwRev | read-only | current | This is the inserted usb device's Software Revision. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.9 | Columnf3UsbHostSerialNum | read-only | current | This is the inserted usb device's Serial Number. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.10 | Columnf3UsbHostMfgName | read-only | current | This is the inserted usb device's Manufacturer Name. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.11 | Columnf3UsbHostMfgDate | read-only | current | This is the inserted usb device's Manufacturer date. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.12 | Columnf3UsbHostMfgSite | read-only | current | This is the inserted usb device's Manufacturer site. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.13 | Columnf3UsbHostSecondaryState | read-only | current | Secondary State of the usb device. |
| 1.3.6.1.4.1.2544.1.12.3.1.24.1.14 | Columnf3UsbHostPhysicalAddress | read-only | current | This is the inserted usb device's MAC Address, if applicable. |
| 1.3.6.1.4.1.2544.1.12.3.1.25 | TableethernetNTEGE112CardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Cards. These are supported on the FSP150CC GE112 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1 | RowethernetNTEGE112CardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE112CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.1 | ColumnethernetNTEGE112CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.2 | ColumnethernetNTEGE112CardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.3 | ColumnethernetNTEGE112CardOperationalState | read-only | current | Operational State of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.4 | ColumnethernetNTEGE112CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.5 | ColumnethernetNTEGE112CardVoltage | read-only | current | Voltage of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.6 | ColumnethernetNTEGE112CardTemperature | read-only | current | Temperature of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.7 | ColumnethernetNTEGE112CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.8 | ColumnethernetNTEGE112CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.9 | ColumnethernetNTEGE112CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.10 | ColumnethernetNTEGE112CardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE112 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.25.1.11 | ColumnethernetNTEGE112CardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26 | TableethernetNTEGE114CardTable | not-accessible | current | Contains information on Ethernet NTE GE114 Cards. These are supported on the FSP150CC GE114 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1 | RowethernetNTEGE114CardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.1 | ColumnethernetNTEGE114CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE114 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.2 | ColumnethernetNTEGE114CardAdminState | read-write | current | Administrative State of the Ethernet NTE GE114 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.3 | ColumnethernetNTEGE114CardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.4 | ColumnethernetNTEGE114CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.5 | ColumnethernetNTEGE114CardVoltage | read-only | current | Voltage of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.6 | ColumnethernetNTEGE114CardTemperature | read-only | current | Temperature of the Ethernet NTE GE114 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.7 | ColumnethernetNTEGE114CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.8 | ColumnethernetNTEGE114CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.9 | ColumnethernetNTEGE114CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.10 | ColumnethernetNTEGE114CardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.26.1.11 | ColumnethernetNTEGE114CardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27 | TableethernetNTEGE206VCardTable | not-accessible | current | Contains information on Ethernet NTE GE206V Cards. These are supported on the FSP150CC GE206V product. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1 | RowethernetNTEGE206VCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE206VCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.1 | ColumnethernetNTEGE206VCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE206V Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.2 | ColumnethernetNTEGE206VCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE206V Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.3 | ColumnethernetNTEGE206VCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE206V Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.4 | ColumnethernetNTEGE206VCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE206V Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.5 | ColumnethernetNTEGE206VCardVoltage | read-only | current | Voltage of the Ethernet NTE GE206V Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.6 | ColumnethernetNTEGE206VCardTemperature | read-only | current | Temperature of the Ethernet NTE GE206V Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.7 | ColumnethernetNTEGE206VCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206V Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.8 | ColumnethernetNTEGE206VCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE206V card. |
| 1.3.6.1.4.1.2544.1.12.3.1.27.1.9 | ColumnethernetNTEGE206VCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.28 | TableethernetGE4SCCCardTable | not-accessible | current | Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1 | RowethernetGE4SCCCardEntry | not-accessible | current | A conceptual row in the ethernetGE4SCCCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.1 | ColumnethernetGE4SCCCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.2 | ColumnethernetGE4SCCCardAdminState | read-write | current | Administrative State of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.3 | ColumnethernetGE4SCCCardOperationalState | read-only | current | Operational State of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.4 | ColumnethernetGE4SCCCardSecondaryState | read-only | current | Secondary State of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.5 | ColumnethernetGE4SCCCardVoltage | read-only | current | Voltage of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.6 | ColumnethernetGE4SCCCardTemperature | read-only | current | Temperature of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.7 | ColumnethernetGE4SCCCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet GE-4S Connector card. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.8 | ColumnethernetGE4SCCCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.28.1.9 | ColumnethernetGE4SCCCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.29 | TableethernetGE4ECCCardTable | not-accessible | current | Contains information on Ethernet GE206V Optical Port Expander Cards. These are supported on the FSP150CC GE206V product. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1 | RowethernetGE4ECCCardEntry | not-accessible | current | A conceptual row in the ethernetGE4ECCCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.1 | ColumnethernetGE4ECCCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.2 | ColumnethernetGE4ECCCardAdminState | read-write | current | Administrative State of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.3 | ColumnethernetGE4ECCCardOperationalState | read-only | current | Operational State of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.4 | ColumnethernetGE4ECCCardSecondaryState | read-only | current | Secondary State of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.5 | ColumnethernetGE4ECCCardVoltage | read-only | current | Voltage of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.6 | ColumnethernetGE4ECCCardTemperature | read-only | current | Temperature of the Ethernet GE-4S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.7 | ColumnethernetGE4ECCCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet GE-4S Connector card. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.8 | ColumnethernetGE4ECCCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.29.1.9 | ColumnethernetGE4ECCCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.30 | TableethernetNTEXG210CardTable | not-accessible | current | Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1 | RowethernetNTEXG210CardEntry | not-accessible | current | A conceptual row in the ethernetNTEXG210CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.1 | ColumnethernetNTEXG210CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE XG210 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.2 | ColumnethernetNTEXG210CardAdminState | read-write | current | Administrative State of the Ethernet NTE XG210 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.3 | ColumnethernetNTEXG210CardOperationalState | read-only | current | Operational State of the Ethernet NTE XG210 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.4 | ColumnethernetNTEXG210CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE XG210 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.5 | ColumnethernetNTEXG210CardVoltage | read-only | current | Voltage of the Ethernet NTE XG210 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.6 | ColumnethernetNTEXG210CardTemperature | read-only | current | Temperature of the Ethernet NTE XG210 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.7 | ColumnethernetNTEXG210CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.8 | ColumnethernetNTEXG210CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE XG210 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.30.1.9 | ColumnethernetNTEXG210CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.31 | TableethernetXG1XCCCardTable | not-accessible | current | Contains information on Ethernet XG210/SH1PCS XFP Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1 | RowethernetXG1XCCCardEntry | not-accessible | current | A conceptual row in the ethernetXG1XCCCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.1 | ColumnethernetXG1XCCCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet XG-1-XFP Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.2 | ColumnethernetXG1XCCCardAdminState | read-write | current | Administrative State of the Ethernet XG-1-XFP Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.3 | ColumnethernetXG1XCCCardOperationalState | read-only | current | Operational State of the Ethernet XG-1-XFP Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.4 | ColumnethernetXG1XCCCardSecondaryState | read-only | current | Secondary State of the Ethernet XG-1-XFP Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.5 | ColumnethernetXG1XCCCardVoltage | read-only | current | Voltage of the Ethernet XG-1-XFP Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.6 | ColumnethernetXG1XCCCardTemperature | read-only | current | Temperature of the Ethernet XG-1-XFP Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.7 | ColumnethernetXG1XCCCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet XG-1-XFP Connector card. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.8 | ColumnethernetXG1XCCCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.31.1.9 | ColumnethernetXG1XCCCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.32 | TableethernetXG1SCCCardTable | not-accessible | current | Contains information on Ethernet XG210/SH1PCS SFP+ Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1 | RowethernetXG1SCCCardEntry | not-accessible | current | A conceptual row in the ethernetXG1SCCCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.1 | ColumnethernetXG1SCCCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet XG-1-SFP+ Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.2 | ColumnethernetXG1SCCCardAdminState | read-write | current | Administrative State of the Ethernet XG-1-SFP+ Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.3 | ColumnethernetXG1SCCCardOperationalState | read-only | current | Operational State of the Ethernet XG-1-SFP+ Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.4 | ColumnethernetXG1SCCCardSecondaryState | read-only | current | Secondary State of the Ethernet XG-1-SFP+ Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.5 | ColumnethernetXG1SCCCardVoltage | read-only | current | Voltage of the Ethernet XG-1-SFP+ Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.6 | ColumnethernetXG1SCCCardTemperature | read-only | current | Temperature of the Ethernet XG-1-SFP+ Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.7 | ColumnethernetXG1SCCCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet XG-1-SFP+ Connector card. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.8 | ColumnethernetXG1SCCCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.32.1.9 | ColumnethernetXG1SCCCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.33 | TableethernetOverOCSTMCardTable | not-accessible | current | Contains information on STM1-4-ET Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1 | RowethernetOverOCSTMCardEntry | not-accessible | current | A conceptual row in the ethernetOverOCSTMCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.1 | ColumnethernetOverOCSTMCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the STM1-4-ET Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.2 | ColumnethernetOverOCSTMCardAdminState | read-write | current | Administrative State of the STM1-4-ET Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.3 | ColumnethernetOverOCSTMCardOperationalState | read-only | current | Operational State of the STM1-4-ET Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.4 | ColumnethernetOverOCSTMCardSecondaryState | read-only | current | Secondary State of the STM1-4-ET Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.5 | ColumnethernetOverOCSTMCardTemperature | read-only | current | Temperature of the STM1-4-ET Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.6 | ColumnethernetOverOCSTMCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the STM1-4-ET Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.7 | ColumnethernetOverOCSTMCardRestartAction | read-write | current | Allows to perform specified action on the STM1-4-ET card. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.8 | ColumnethernetOverOCSTMCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.9 | ColumnethernetOverOCSTMCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.10 | ColumnethernetOverOCSTMCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.33.1.11 | ColumnethernetOverOCSTMCardMode | read-write | current | This attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH.. |
| 1.3.6.1.4.1.2544.1.12.3.1.34 | TablepseudoWireOcnStmCardTable | not-accessible | current | Contains information on Pseudo Wire OCN STM Cards. These are supported on the FSP150CC GE206v product. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1 | RowpseudoWireOcnStmCardEntry | not-accessible | current | A conceptual row in the pseudoWireOcnStmCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.1 | ColumnpseudoWireOcnStmCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.2 | ColumnpseudoWireOcnStmCardAdminState | read-write | current | Administrative State of the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.3 | ColumnpseudoWireOcnStmCardOperationalState | read-only | current | Operational State of the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.4 | ColumnpseudoWireOcnStmCardSecondaryState | read-only | current | Secondary State of the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.5 | ColumnpseudoWireOcnStmCardIpAddress | read-write | current | IP Address associated with the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.6 | ColumnpseudoWireOcnStmCardMode | read-write | current | Card Mode of with the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.7 | ColumnpseudoWireOcnStmCardVoltage | read-only | current | Voltage of the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.8 | ColumnpseudoWireOcnStmCardTemperature | read-only | current | Temperature of the Pseudo Wire OCN/STM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.9 | ColumnpseudoWireOcnStmCardRestartAction | read-write | current | Allows to perform specified action on the Pseudo Wire OCN/STM card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.10 | ColumnpseudoWireOcnStmCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.11 | ColumnpseudoWireOcnStmCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.12 | ColumnpseudoWireOcnStmCardPSNEncapsulation | read-write | current | This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.13 | ColumnpseudoWireOcnStmCardFreqSourceType | read-write | current | This object represents the TDM Frequency source type of OC/STM card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.14 | ColumnpseudoWireOcnStmCardFreqSource | read-write | current | This object represents the TDM Frequency source of OC/STM card. |
| 1.3.6.1.4.1.2544.1.12.3.1.34.1.15 | ColumnpseudoWireOcnStmCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.35 | TablepseudoWireE1T1CardTable | not-accessible | current | Contains information on Pseudo Wire T1/E1 Cards. These are supported on the FSP150CC GE206v product. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1 | RowpseudoWireE1T1CardEntry | not-accessible | current | A conceptual row in the pseudoWireE1T1CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.1 | ColumnpseudoWireE1T1CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.2 | ColumnpseudoWireE1T1CardAdminState | read-write | current | Administrative State of the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.3 | ColumnpseudoWireE1T1CardOperationalState | read-only | current | Operational State of the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.4 | ColumnpseudoWireE1T1CardSecondaryState | read-only | current | Secondary State of the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.5 | ColumnpseudoWireE1T1CardIpAddress | read-write | current | IP Address associated with the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.6 | ColumnpseudoWireE1T1CardMode | read-write | current | Card Mode of with the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.7 | ColumnpseudoWireE1T1CardVoltage | read-only | current | Voltage of the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.8 | ColumnpseudoWireE1T1CardTemperature | read-only | current | Temperature of the Pseudo Wire T1/E1 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.9 | ColumnpseudoWireE1T1CardRestartAction | read-write | current | Allows to perform specified action on the Pseudo Wire T1/E1 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.10 | ColumnpseudoWireE1T1CardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.11 | ColumnpseudoWireE1T1CardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.35.1.12 | ColumnpseudoWireE1T1CardPSNEncapsulation | read-write | current | This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets. |
| 1.3.6.1.4.1.2544.1.12.3.1.36 | Tableethernet1x10GHighPerCardTable | not-accessible | current | Contains information on Ethernet 1x10G High Performance Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1 | Rowethernet1x10GHighPerCardEntry | not-accessible | current | A conceptual row in the ethernet1x10GHighPerCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.1 | Columnethernet1x10GHighPerCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet 1x10G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.2 | Columnethernet1x10GHighPerCardAdminState | read-write | current | Administrative State of the Ethernet 1x10G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.3 | Columnethernet1x10GHighPerCardOperationalState | read-only | current | Operational State of the Ethernet 1x10G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.4 | Columnethernet1x10GHighPerCardSecondaryState | read-only | current | Secondary State of the Ethernet 1x10G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.5 | Columnethernet1x10GHighPerCardTemperature | read-only | current | Temperature of the Ethernet 1x10G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.6 | Columnethernet1x10GHighPerCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.7 | Columnethernet1x10GHighPerCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet 1x10G High Performance card. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.8 | Columnethernet1x10GHighPerCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.9 | Columnethernet1x10GHighPerCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.36.1.10 | Columnethernet1x10GHighPerCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.37 | Tableethernet10x1GHighPerCardTable | not-accessible | current | Contains information on Ethernet 10x1G High Performance Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1 | Rowethernet10x1GHighPerCardEntry | not-accessible | current | A conceptual row in the ethernet10x1GHighPerCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.1 | Columnethernet10x1GHighPerCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet 10x1G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.2 | Columnethernet10x1GHighPerCardAdminState | read-write | current | Administrative State of the Ethernet 10x1G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.3 | Columnethernet10x1GHighPerCardOperationalState | read-only | current | Operational State of the Ethernet 10x1G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.4 | Columnethernet10x1GHighPerCardSecondaryState | read-only | current | Secondary State of the Ethernet 10x1G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.5 | Columnethernet10x1GHighPerCardTemperature | read-only | current | Temperature of the Ethernet 10x1G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.6 | Columnethernet10x1GHighPerCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet 10x1G High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.7 | Columnethernet10x1GHighPerCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet 10x1G High Performance card. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.8 | Columnethernet10x1GHighPerCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.9 | Columnethernet10x1GHighPerCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.37.1.10 | Columnethernet10x1GHighPerCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.38 | TableethernetNTET1804CardTable | not-accessible | current | Contains information on Ethernet NTE T1804 Cards. These are supported on the FSP150CC T1804 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1 | RowethernetNTET1804CardEntry | not-accessible | current | A conceptual row in the ethernetNTET1804CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.1 | ColumnethernetNTET1804CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE T1804 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.2 | ColumnethernetNTET1804CardAdminState | read-write | current | Administrative State of the Ethernet NTE T1804 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.3 | ColumnethernetNTET1804CardOperationalState | read-only | current | Operational State of the Ethernet NTE T1804 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.4 | ColumnethernetNTET1804CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE T1804 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.5 | ColumnethernetNTET1804CardVoltage | read-only | current | Voltage of the Ethernet NTE GE112S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.6 | ColumnethernetNTET1804CardTemperature | read-only | current | Temperature of the Ethernet NTE T1804 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.7 | ColumnethernetNTET1804CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE T1804 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.8 | ColumnethernetNTET1804CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE T1804 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.9 | ColumnethernetNTET1804CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.38.1.10 | ColumnethernetNTET1804CardMode | read-write | current | This attribute is to show/set E1/T1 mode of the NET T1804 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39 | TableethernetNTET3204CardTable | not-accessible | current | Contains information on Ethernet NTE T3204 Cards. These are supported on the FSP150CC T3204 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1 | RowethernetNTET3204CardEntry | not-accessible | current | A conceptual row in the ethernetNTET3204CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.1 | ColumnethernetNTET3204CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE T3204 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.2 | ColumnethernetNTET3204CardAdminState | read-write | current | Administrative State of the Ethernet NTE T3204 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.3 | ColumnethernetNTET3204CardOperationalState | read-only | current | Operational State of the Ethernet NTE T3204 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.4 | ColumnethernetNTET3204CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE T3204 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.5 | ColumnethernetNTET3204CardVoltage | read-only | current | Voltage of the Ethernet NTE GE112S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.6 | ColumnethernetNTET3204CardTemperature | read-only | current | Temperature of the Ethernet NTE T3204 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.7 | ColumnethernetNTET3204CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE T3204 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.8 | ColumnethernetNTET3204CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE T3204 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.9 | ColumnethernetNTET3204CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.39.1.10 | ColumnethernetNTET3204CardMode | read-write | current | This attribute is to show/set E3/T3 mode of the NET T3204 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40 | TableethernetNTEGESyncProbeCardTable | not-accessible | current | Contains information on Ethernet NTE-GE SyncProbe Card. These are supported on the FSP150CC GE SyncProbe product. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1 | RowethernetNTEGESyncProbeCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGESyncProbeCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.1 | ColumnethernetNTEGESyncProbeCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE SyncProbe Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.2 | ColumnethernetNTEGESyncProbeCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE SyncProbe Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.3 | ColumnethernetNTEGESyncProbeCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE SyncProbe Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.4 | ColumnethernetNTEGESyncProbeCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE SyncProbe Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.5 | ColumnethernetNTEGESyncProbeCardVoltage | read-only | current | Voltage of the Ethernet NTE GE SyncProbe Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.6 | ColumnethernetNTEGESyncProbeCardTemperature | read-only | current | Temperature of the Ethernet NTE GE SyncProbe Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.7 | ColumnethernetNTEGESyncProbeCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE SyncProbe Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.8 | ColumnethernetNTEGESyncProbeCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE SyncProbe card. |
| 1.3.6.1.4.1.2544.1.12.3.1.40.1.9 | ColumnethernetNTEGESyncProbeCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.41 | TableethernetGE8SCCCardTable | not-accessible | current | Contains information on Ethernet XG210/SH1PCS Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS product. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1 | RowethernetGE8SCCCardEntry | not-accessible | current | A conceptual row in the ethernetGE8SCCCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.1 | ColumnethernetGE8SCCCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.2 | ColumnethernetGE8SCCCardAdminState | read-write | current | Administrative State of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.3 | ColumnethernetGE8SCCCardOperationalState | read-only | current | Operational State of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.4 | ColumnethernetGE8SCCCardSecondaryState | read-only | current | Secondary State of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.5 | ColumnethernetGE8SCCCardVoltage | read-only | current | Voltage of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.6 | ColumnethernetGE8SCCCardTemperature | read-only | current | Temperature of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.7 | ColumnethernetGE8SCCCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet GE-8S Connector card. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.8 | ColumnethernetGE8SCCCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.41.1.9 | ColumnethernetGE8SCCCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.42 | TableethernetNTEGE114HCardTable | not-accessible | current | Contains information on Ethernet NTE GE114H Cards. These are supported on the FSP150CC GE114H product. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1 | RowethernetNTEGE114HCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114HCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.1 | ColumnethernetNTEGE114HCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE114H Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.2 | ColumnethernetNTEGE114HCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE114H Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.3 | ColumnethernetNTEGE114HCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114H Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.4 | ColumnethernetNTEGE114HCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114H Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.5 | ColumnethernetNTEGE114HCardVoltage | read-only | current | Voltage of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.6 | ColumnethernetNTEGE114HCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114H Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.7 | ColumnethernetNTEGE114HCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114H Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.8 | ColumnethernetNTEGE114HCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114H card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.9 | ColumnethernetNTEGE114HCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.10 | ColumnethernetNTEGE114HCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114H card. |
| 1.3.6.1.4.1.2544.1.12.3.1.42.1.11 | ColumnethernetNTEGE114HCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114H card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43 | TableethernetNTEGE114PHCardTable | not-accessible | current | Contains information on Ethernet NTE GE114PH Cards. These are supported on the FSP150CC GE114PH product. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1 | RowethernetNTEGE114PHCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114PHCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.1 | ColumnethernetNTEGE114PHCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE114PH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.2 | ColumnethernetNTEGE114PHCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE114PH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.3 | ColumnethernetNTEGE114PHCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114PH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.4 | ColumnethernetNTEGE114PHCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114PH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.5 | ColumnethernetNTEGE114PHCardVoltage | read-only | current | Voltage of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.6 | ColumnethernetNTEGE114PHCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114PH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.7 | ColumnethernetNTEGE114PHCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114PH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.8 | ColumnethernetNTEGE114PHCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114PH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.9 | ColumnethernetNTEGE114PHCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.10 | ColumnethernetNTEGE114PHCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114PH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.43.1.11 | ColumnethernetNTEGE114PHCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114PH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.44 | TableethernetFE36ECardTable | not-accessible | current | Contains information on Ethernet 36x100M Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1 | RowethernetFE36ECardEntry | not-accessible | current | A conceptual row in the ethernetFE36ECardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.1 | ColumnethernetFE36ECardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet FE36E Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.2 | ColumnethernetFE36ECardAdminState | read-write | current | Administrative State of the Ethernet FE36E Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.3 | ColumnethernetFE36ECardOperationalState | read-only | current | Operational State of the Ethernet FE36E Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.4 | ColumnethernetFE36ECardSecondaryState | read-only | current | Secondary State of the Ethernet FE36E Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.5 | ColumnethernetFE36ECardTemperature | read-only | current | Temperature of the Ethernet FE36E Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.6 | ColumnethernetFE36ECardRestartAction | read-write | current | Allows to perform specified action on the Ethernet FE36E card. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.7 | ColumnethernetFE36ECardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.8 | ColumnethernetFE36ECardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.9 | ColumnethernetFE36ECardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.44.1.10 | ColumnethernetFE36ECard8023azEnabled | read-write | current | This object describes whether enable 802.3az energy efficient. |
| 1.3.6.1.4.1.2544.1.12.3.1.45 | TableethernetNTEGE114SHCardTable | not-accessible | current | Contains information on Ethernet NTE GE114SH Cards. These are supported on the FSP150CC GE114SH product. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1 | RowethernetNTEGE114SHCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114SHCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.1 | ColumnethernetNTEGE114SHCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE114SH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.2 | ColumnethernetNTEGE114SHCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE114SH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.3 | ColumnethernetNTEGE114SHCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114SH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.4 | ColumnethernetNTEGE114SHCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114SH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.5 | ColumnethernetNTEGE114SHCardVoltage | read-only | current | Voltage of the Ethernet NTE GE112 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.6 | ColumnethernetNTEGE114SHCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114SH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.7 | ColumnethernetNTEGE114SHCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114SH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.8 | ColumnethernetNTEGE114SHCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114SH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.9 | ColumnethernetNTEGE114SHCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.10 | ColumnethernetNTEGE114SHCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114SH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.45.1.11 | ColumnethernetNTEGE114SHCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114SH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46 | TableethernetNTEGE114SCardTable | not-accessible | current | Contains information on Ethernet NTE GE114S Cards. These are supported on the FSP150CC GE114S product. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1 | RowethernetNTEGE114SCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114SCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.1 | ColumnethernetNTEGE114SCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE114S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.2 | ColumnethernetNTEGE114SCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE114S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.3 | ColumnethernetNTEGE114SCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.4 | ColumnethernetNTEGE114SCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.5 | ColumnethernetNTEGE114SCardVoltage | read-only | current | Voltage of the Ethernet NTE GE112S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.6 | ColumnethernetNTEGE114SCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.7 | ColumnethernetNTEGE114SCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114S Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.8 | ColumnethernetNTEGE114SCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114S card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.9 | ColumnethernetNTEGE114SCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.10 | ColumnethernetNTEGE114SCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114S card. |
| 1.3.6.1.4.1.2544.1.12.3.1.46.1.11 | ColumnethernetNTEGE114SCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114S card. |
| 1.3.6.1.4.1.2544.1.12.3.1.47 | TablestuHighPerCardTable | not-accessible | current | Contains information on STU Cards. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1 | RowstuHighPerCardEntry | not-accessible | current | A conceptual row in the stuHighPerCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.1 | ColumnstuHighPerCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the STU High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.2 | ColumnstuHighPerCardAdminState | read-write | current | Administrative State of the Stu High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.3 | ColumnstuHighPerCardOperationalState | read-only | current | Operational State of the Stu High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.4 | ColumnstuHighPerCardSecondaryState | read-only | current | Secondary State of the Stu High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.5 | ColumnstuHighPerCardTemperature | read-only | current | Temperature of the Stu High Performance Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.6 | ColumnstuHighPerCardRestartAction | read-write | current | Allows to perform specified action on the Stu High Performance card. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.7 | ColumnstuHighPerCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.8 | ColumnstuHighPerCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.47.1.9 | ColumnstuHighPerCardForceOffLineAction | read-write | current | On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is he… |
| 1.3.6.1.4.1.2544.1.12.3.1.48 | TablestiHighPerTable | not-accessible | current | Contains information on STI within the Shelf. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1 | RowstiHighPerEntry | not-accessible | current | A conceptual row in the stiTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1.1 | ColumnstiHighPerEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the STI High Per card. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1.2 | ColumnstiHighPerAdminState | read-write | current | Administrative State of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1.3 | ColumnstiHighPerOperationalState | read-only | current | Operational State of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1.4 | ColumnstiHighPerSecondaryState | read-only | current | Secondary State of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1.5 | ColumnstiHighPerTemperature | read-only | current | Temperature of the STI. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1.6 | ColumnstiHighPerStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.48.1.7 | ColumnstiHighPerRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.49 | TableethernetGE8ECCCardTable | not-accessible | current | Contains information on Ethernet XG210 Optical Port Expander Cards. These are supported on the FSP150CC XG210, SH1PCS products. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1 | RowethernetGE8ECCCardEntry | not-accessible | current | A conceptual row in the ethernetGE8ECCCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.1 | ColumnethernetGE8ECCCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.2 | ColumnethernetGE8ECCCardAdminState | read-write | current | Administrative State of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.3 | ColumnethernetGE8ECCCardOperationalState | read-only | current | Operational State of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.4 | ColumnethernetGE8ECCCardSecondaryState | read-only | current | Secondary State of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.5 | ColumnethernetGE8ECCCardVoltage | read-only | current | Voltage of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.6 | ColumnethernetGE8ECCCardTemperature | read-only | current | Temperature of the Ethernet GE-8S Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.7 | ColumnethernetGE8ECCCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet GE-8S Connector card. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.8 | ColumnethernetGE8ECCCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.49.1.9 | ColumnethernetGE8ECCCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.50 | TablenetworkElementLLDPParamsTable | not-accessible | current | Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table. |
| 1.3.6.1.4.1.2544.1.12.3.1.50.1 | RownetworkElementLLDPParamsEntry | not-accessible | current | A conceptual row in the networkElementLLDPParamsTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.50.1.1 | ColumnneLLDPParamsLLDPEnableAction | read-create | current | This object allows user enable or disable LLDP on all the ports in the NE. |
| 1.3.6.1.4.1.2544.1.12.3.1.51 | TableethernetNTESH1PCSCardTable | not-accessible | current | Contains information on Ethernet NTE SH1PCS Cards. These are supported on the FSP150CC SH1PCS product. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1 | RowethernetNTESH1PCSCardEntry | not-accessible | current | A conceptual row in the ethernetNTESH1PCSCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.1 | ColumnethernetNTESH1PCSCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE SH1PCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.2 | ColumnethernetNTESH1PCSCardAdminState | read-write | current | Administrative State of the Ethernet NTE SH1PCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.3 | ColumnethernetNTESH1PCSCardOperationalState | read-only | current | Operational State of the Ethernet NTE SH1PCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.4 | ColumnethernetNTESH1PCSCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE SH1PCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.5 | ColumnethernetNTESH1PCSCardVoltage | read-only | current | Voltage of the Ethernet NTE SH1PCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.6 | ColumnethernetNTESH1PCSCardTemperature | read-only | current | Temperature of the Ethernet NTE SH1PCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.7 | ColumnethernetNTESH1PCSCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE SH1PCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.8 | ColumnethernetNTESH1PCSCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE SH1PCS card. |
| 1.3.6.1.4.1.2544.1.12.3.1.51.1.9 | ColumnethernetNTESH1PCSCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.52 | TableethernetNTEOSA5411CardTable | not-accessible | current | Contains information on Ethernet NTE OSA5411 Card. These are supported on the FSP150CC OSA5411 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1 | RowethernetNTEOSA5411CardEntry | not-accessible | current | A conceptual row in the ethernetNTEOSA5411CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.1 | ColumnethernetNTEOSA5411CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5411 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.2 | ColumnethernetNTEOSA5411CardAdminState | read-write | current | Administrative State of the Ethernet NTE OSA5411 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.3 | ColumnethernetNTEOSA5411CardOperationalState | read-only | current | Operational State of the Ethernet NTE OSA5411 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.4 | ColumnethernetNTEOSA5411CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE OSA5411 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.5 | ColumnethernetNTEOSA5411CardVoltage | read-only | current | Voltage of the Ethernet NTE OSA5411 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.6 | ColumnethernetNTEOSA5411CardTemperature | read-only | current | Temperature of the Ethernet NTE OSA5411 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.7 | ColumnethernetNTEOSA5411CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5411 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.8 | ColumnethernetNTEOSA5411CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE OSA5411 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.52.1.9 | ColumnethernetNTEOSA5411CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.53 | TableethernetNTEGE112ProCardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1 | RowethernetNTEGE112ProCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE112ProCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.1 | ColumnethernetNTEGE112ProCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.2 | ColumnethernetNTEGE112ProCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.3 | ColumnethernetNTEGE112ProCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE112Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.4 | ColumnethernetNTEGE112ProCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE112Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.5 | ColumnethernetNTEGE112ProCardVoltage | read-only | current | Voltage of the Ethernet NTE GE112Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.6 | ColumnethernetNTEGE112ProCardTemperature | read-only | current | Temperature of the Ethernet NTE GE112Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.7 | ColumnethernetNTEGE112ProCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.8 | ColumnethernetNTEGE112ProCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112Pro card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.9 | ColumnethernetNTEGE112ProCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.10 | ColumnethernetNTEGE112ProCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE112Pro card. |
| 1.3.6.1.4.1.2544.1.12.3.1.53.1.11 | ColumnethernetNTEGE112ProCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112Pro card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54 | TableethernetNTEGE112ProMCardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1 | RowethernetNTEGE112ProMCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE112ProMCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.1 | ColumnethernetNTEGE112ProMCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.2 | ColumnethernetNTEGE112ProMCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.3 | ColumnethernetNTEGE112ProMCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE112ProM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.4 | ColumnethernetNTEGE112ProMCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE112ProM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.5 | ColumnethernetNTEGE112ProMCardVoltage | read-only | current | Voltage of the Ethernet NTE GE112ProM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.6 | ColumnethernetNTEGE112ProMCardTemperature | read-only | current | Temperature of the Ethernet NTE GE112ProM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.7 | ColumnethernetNTEGE112ProMCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProM Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.8 | ColumnethernetNTEGE112ProMCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112ProM card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.9 | ColumnethernetNTEGE112ProMCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.10 | ColumnethernetNTEGE112ProMCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE112ProM card. |
| 1.3.6.1.4.1.2544.1.12.3.1.54.1.11 | ColumnethernetNTEGE112ProMCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112ProM card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55 | TableethernetNTEXG210CCardTable | not-accessible | current | Contains information on Ethernet NTE XG210 Cards. These are supported on the FSP150CC XG210 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1 | RowethernetNTEXG210CCardEntry | not-accessible | current | A conceptual row in the ethernetNTEXG210CCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.1 | ColumnethernetNTEXG210CCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE XG210C Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.2 | ColumnethernetNTEXG210CCardAdminState | read-write | current | Administrative State of the Ethernet NTE XG210C Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.3 | ColumnethernetNTEXG210CCardOperationalState | read-only | current | Operational State of the Ethernet NTE XG210C Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.4 | ColumnethernetNTEXG210CCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE XG210C Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.5 | ColumnethernetNTEXG210CCardVoltage | read-only | current | Voltage of the Ethernet NTE XG210C Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.6 | ColumnethernetNTEXG210CCardTemperature | read-only | current | Temperature of the Ethernet NTE XG210C Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.7 | ColumnethernetNTEXG210CCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE XG210C Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.8 | ColumnethernetNTEXG210CCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE XG210 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.55.1.9 | ColumnethernetNTEXG210CCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.56 | TableethernetGE8SCryptoConnectorCardTable | not-accessible | current | Contains information on Ethernet XG210C Optical Port Expander Cards. These are supported on the XG210C MACSEC board. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1 | RowethernetGE8SCryptoConnectorCardEntry | not-accessible | current | A conceptual row in the ethernetGE8SCryptoConnectorCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.1 | ColumnethernetGE8SCryptoConnectorCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet GE-8SC Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.2 | ColumnethernetGE8SCryptoConnectorCardAdminState | read-write | current | Administrative State of the Ethernet GE-8SC Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.3 | ColumnethernetGE8SCryptoConnectorCardOperationalState | read-only | current | Operational State of the Ethernet GE-8SC Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.4 | ColumnethernetGE8SCryptoConnectorCardSecondaryState | read-only | current | Secondary State of the Ethernet GE-8SC Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.5 | ColumnethernetGE8SCryptoConnectorCardVoltage | read-only | current | Voltage of the Ethernet GE-8SC Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.6 | ColumnethernetGE8SCryptoConnectorCardTemperature | read-only | current | Temperature of the Ethernet GE-8SC Connector Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.7 | ColumnethernetGE8SCryptoConnectorCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet GE-8SC Connector card. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.8 | ColumnethernetGE8SCryptoConnectorCardStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.3.1.56.1.9 | ColumnethernetGE8SCryptoConnectorCardRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.3.1.57 | TableethernetNTEGE114ProCardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1 | RowethernetNTEGE114ProCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114ProCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.1 | ColumnethernetNTEGE114ProCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.2 | ColumnethernetNTEGE114ProCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.3 | ColumnethernetNTEGE114ProCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.4 | ColumnethernetNTEGE114ProCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.5 | ColumnethernetNTEGE114ProCardVoltage | read-only | current | Voltage of the Ethernet NTE GE114Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.6 | ColumnethernetNTEGE114ProCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.7 | ColumnethernetNTEGE114ProCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.8 | ColumnethernetNTEGE114ProCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114Pro card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.9 | ColumnethernetNTEGE114ProCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.10 | ColumnethernetNTEGE114ProCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114Pro card. |
| 1.3.6.1.4.1.2544.1.12.3.1.57.1.11 | ColumnethernetNTEGE114ProCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114Pro card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58 | TableethernetNTEGE114ProCCardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1 | RowethernetNTEGE114ProCCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114ProCCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.1 | ColumnethernetNTEGE114ProCCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.2 | ColumnethernetNTEGE114ProCCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.3 | ColumnethernetNTEGE114ProCCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114ProC Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.4 | ColumnethernetNTEGE114ProCCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114ProC Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.5 | ColumnethernetNTEGE114ProCCardVoltage | read-only | current | Voltage of the Ethernet NTE GE114ProC Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.6 | ColumnethernetNTEGE114ProCCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114ProC Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.7 | ColumnethernetNTEGE114ProCCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProC Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.8 | ColumnethernetNTEGE114ProCCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProC card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.9 | ColumnethernetNTEGE114ProCCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.10 | ColumnethernetNTEGE114ProCCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114ProC card. |
| 1.3.6.1.4.1.2544.1.12.3.1.58.1.11 | ColumnethernetNTEGE114ProCCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProC card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59 | TableethernetNTEGE114ProSHCardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1 | RowethernetNTEGE114ProSHCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114ProSHCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.1 | ColumnethernetNTEGE114ProSHCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.2 | ColumnethernetNTEGE114ProSHCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.3 | ColumnethernetNTEGE114ProSHCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114ProS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.4 | ColumnethernetNTEGE114ProSHCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114ProS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.5 | ColumnethernetNTEGE114ProSHCardVoltage | read-only | current | Voltage of the Ethernet NTE GE114ProS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.6 | ColumnethernetNTEGE114ProSHCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114ProS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.7 | ColumnethernetNTEGE114ProSHCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.8 | ColumnethernetNTEGE114ProSHCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProS card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.9 | ColumnethernetNTEGE114ProSHCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.10 | ColumnethernetNTEGE114ProSHCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114ProSH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.59.1.11 | ColumnethernetNTEGE114ProSHCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProSH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60 | TableethernetNTEGE114ProCSHCardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1 | RowethernetNTEGE114ProCSHCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114ProCSHCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.1 | ColumnethernetNTEGE114ProCSHCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.2 | ColumnethernetNTEGE114ProCSHCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.3 | ColumnethernetNTEGE114ProCSHCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114ProCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.4 | ColumnethernetNTEGE114ProCSHCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114ProCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.5 | ColumnethernetNTEGE114ProCSHCardVoltage | read-only | current | Voltage of the Ethernet NTE GE114ProCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.6 | ColumnethernetNTEGE114ProCSHCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114ProCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.7 | ColumnethernetNTEGE114ProCSHCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProCS Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.8 | ColumnethernetNTEGE114ProCSHCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProCS card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.9 | ColumnethernetNTEGE114ProCSHCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.10 | ColumnethernetNTEGE114ProCSHCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114ProCS card. |
| 1.3.6.1.4.1.2544.1.12.3.1.60.1.11 | ColumnethernetNTEGE114ProCSHCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProCS card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61 | TableethernetNTEGE114ProHECardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1 | RowethernetNTEGE114ProHECardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114ProHECardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.1 | ColumnethernetNTEGE114ProHECardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.2 | ColumnethernetNTEGE114ProHECardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.3 | ColumnethernetNTEGE114ProHECardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114ProHE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.4 | ColumnethernetNTEGE114ProHECardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114ProHE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.5 | ColumnethernetNTEGE114ProHECardVoltage | read-only | current | Voltage of the Ethernet NTE GE114ProHE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.6 | ColumnethernetNTEGE114ProHECardTemperature | read-only | current | Temperature of the Ethernet NTE GE114ProHE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.7 | ColumnethernetNTEGE114ProHECardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114ProHE Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.8 | ColumnethernetNTEGE114ProHECardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProHE card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.9 | ColumnethernetNTEGE114ProHECardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.10 | ColumnethernetNTEGE114ProHECardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114ProHE card. |
| 1.3.6.1.4.1.2544.1.12.3.1.61.1.11 | ColumnethernetNTEGE114ProHECardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114ProHE card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62 | TableethernetNTEGE112ProHCardTable | not-accessible | current | Contains information on Ethernet NTE GE112 Pro Cards. These are supported on the FSP150CC GE112 Pro product. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1 | RowethernetNTEGE112ProHCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE112ProHCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.1 | ColumnethernetNTEGE112ProHCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.2 | ColumnethernetNTEGE112ProHCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE112 Pro Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.3 | ColumnethernetNTEGE112ProHCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE112ProH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.4 | ColumnethernetNTEGE112ProHCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE112ProH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.5 | ColumnethernetNTEGE112ProHCardVoltage | read-only | current | Voltage of the Ethernet NTE GE112ProH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.6 | ColumnethernetNTEGE112ProHCardTemperature | read-only | current | Temperature of the Ethernet NTE GE112ProH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.7 | ColumnethernetNTEGE112ProHCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE112ProH Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.8 | ColumnethernetNTEGE112ProHCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112ProH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.9 | ColumnethernetNTEGE112ProHCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.10 | ColumnethernetNTEGE112ProHCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE112ProH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.62.1.11 | ColumnethernetNTEGE112ProHCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE112ProH card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63 | TableethernetNTEOSA5420CardTable | not-accessible | current | Contains information on Ethernet NTE OSA5420 Card. These are supported on the FSP150CC OSA5420 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1 | RowethernetNTEOSA5420CardEntry | not-accessible | current | A conceptual row in the ethernetNTEOSA5420CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.1 | ColumnethernetNTEOSA5420CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5420 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.2 | ColumnethernetNTEOSA5420CardAdminState | read-write | current | Administrative State of the Ethernet NTE OSA5420 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.3 | ColumnethernetNTEOSA5420CardOperationalState | read-only | current | Operational State of the Ethernet NTE OSA5420 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.4 | ColumnethernetNTEOSA5420CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE OSA5420 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.5 | ColumnethernetNTEOSA5420CardVoltage | read-only | current | Voltage of the Ethernet NTE OSA5420 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.6 | ColumnethernetNTEOSA5420CardTemperature | read-only | current | Temperature of the Ethernet NTE OSA5420 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.7 | ColumnethernetNTEOSA5420CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5420 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.8 | ColumnethernetNTEOSA5420CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE OSA5420 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.63.1.9 | ColumnethernetNTEOSA5420CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.64 | TableethernetNTEOSA5421CardTable | not-accessible | current | Contains information on Ethernet NTE OSA5421 Card. These are supported on the FSP150CC OSA5421 product. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1 | RowethernetNTEOSA5421CardEntry | not-accessible | current | A conceptual row in the ethernetNTEOSA5421CardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.1 | ColumnethernetNTEOSA5421CardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE OSA5421 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.2 | ColumnethernetNTEOSA5421CardAdminState | read-write | current | Administrative State of the Ethernet NTE OSA5421 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.3 | ColumnethernetNTEOSA5421CardOperationalState | read-only | current | Operational State of the Ethernet NTE OSA5421 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.4 | ColumnethernetNTEOSA5421CardSecondaryState | read-only | current | Secondary State of the Ethernet NTE OSA5421 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.5 | ColumnethernetNTEOSA5421CardVoltage | read-only | current | Voltage of the Ethernet NTE OSA5421 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.6 | ColumnethernetNTEOSA5421CardTemperature | read-only | current | Temperature of the Ethernet NTE OSA5421 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.7 | ColumnethernetNTEOSA5421CardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE OSA5421 Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.8 | ColumnethernetNTEOSA5421CardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE OSA5421 card. |
| 1.3.6.1.4.1.2544.1.12.3.1.64.1.9 | ColumnethernetNTEOSA5421CardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.65 | TableethernetNTEGE114GCardTable | not-accessible | current | Contains information on Ethernet NTE GE114G Cards. These are supported on the FSP150CC GE114G product. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1 | RowethernetNTEGE114GCardEntry | not-accessible | current | A conceptual row in the ethernetNTEGE114GCardTable. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.1 | ColumnethernetNTEGE114GCardEntityIndex | read-only | current | Entity Index from ENTITY-MIB for the Ethernet NTE GE114G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.2 | ColumnethernetNTEGE114GCardAdminState | read-write | current | Administrative State of the Ethernet NTE GE114G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.3 | ColumnethernetNTEGE114GCardOperationalState | read-only | current | Operational State of the Ethernet NTE GE114G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.4 | ColumnethernetNTEGE114GCardSecondaryState | read-only | current | Secondary State of the Ethernet NTE GE114G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.5 | ColumnethernetNTEGE114GCardVoltage | read-only | current | Voltage of the Ethernet NTE GE114G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.6 | ColumnethernetNTEGE114GCardTemperature | read-only | current | Temperature of the Ethernet NTE GE114G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.7 | ColumnethernetNTEGE114GCardSnmpDyingGaspEnabled | read-write | current | Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE114G Card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.8 | ColumnethernetNTEGE114GCardRestartAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114G card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.9 | ColumnethernetNTEGE114GCardFineGrainedPmInterval | read-write | current | Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is inter… |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.10 | ColumnethernetNTEGE114GCardSwitchPortActionPort | read-create | current | Which port to perform specified switch action on the Ethernet NTE GE114G card. |
| 1.3.6.1.4.1.2544.1.12.3.1.65.1.11 | ColumnethernetNTEGE114GCardSwitchPortAction | read-write | current | Allows to perform specified action on the Ethernet NTE GE114G card. |
| 1.3.6.1.4.1.2544.1.12.3.2 | NodecmEntityConformance | |||
| 1.3.6.1.4.1.2544.1.12.3.2.1 | NodecmEntityCompliances | |||
| 1.3.6.1.4.1.2544.1.12.3.2.1.1 | CompliancecmEntityCompliance | current | Describes the requirements for conformance to the CM Entity group. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2 | NodecmEntityGroups | |||
| 1.3.6.1.4.1.2544.1.12.3.2.2.1 | GroupcmEntityObjectGroup | deprecated | *************** THIS OBJECT GROUP IS DEPRECATED ****************** A collection of objects used to manage the CM Entity group. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.2 | GroupcommonEntityGroup | current | A collection of common objects used to manage any F3 product family product. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.3 | GrouppsuGroup | current | A collection of objects used to manage the F3 Power Supply units. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.4 | GroupfanGroup | current | A collection of objects used to manage the F3 Fan units. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.5 | GrouphubshelfGroup | current | A collection of objects used to manage the CM Hub Shelf entities. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.6 | GroupnteGe206CardGroup | current | A collection of objects used to manage the GE206 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.7 | GroupnteGe201SyncECardGroup | current | A collection of objects used to manage the GE201 Sync Ethernet Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.8 | GroupnteGe201NonSyncECardGroup | current | A collection of objects used to manage the GE201 Non SyncE Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.9 | GroupnteGe206FCardGroup | current | A collection of objects used to manage the GE206F Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.10 | GroupnteGe112CardGroup | current | A collection of objects used to manage the GE112 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.11 | GroupnteGe114CardGroup | current | A collection of objects used to manage the GE114 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.12 | GroupnteGe206VCardGroup | current | A collection of objects used to manage the GE206V Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.13 | GroupnteXg210CardGroup | current | A collection of objects used to manage the XG210 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.14 | GrouppseudoWireCardOcnStmCardGroup | current | A collection of objects used to manage the Pseudo Wire OCN/STM Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.15 | GrouppseudoWireCardE1T1CardGroup | current | A collection of objects used to manage the Pseudo Wire E1/T1 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.16 | GroupnteT1804CardGroup | current | A collection of objects used to manage the T1804 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.17 | GroupnteT3204CardGroup | current | A collection of objects used to manage the T3204 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.18 | GroupnteGeSyncProbeCardGroup | current | A collection of objects used to manage the GE SyncProbe Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.19 | Groupxg1XCCCardGroup | current | A collection of objects used to manage the XG 1X CC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.20 | Groupxg1SCCCardGroup | current | A collection of objects used to manage the XG 1S CC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.21 | Groupge4ECCCardGroup | current | A collection of objects used to manage the GE 4E CC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.22 | Groupge4SCCCardGroup | current | A collection of objects used to manage the GE 4S CC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.23 | Groupge8SCCCardGroup | current | A collection of objects used to manage the GE 8S CC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.24 | GroupnteGe114HCardGroup | current | A collection of objects used to manage the GE114H Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.25 | GroupnteGe114PHCardGroup | current | A collection of objects used to manage the GE114PH Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.26 | GroupethernetOverOCSTMCardGroup | current | A collection of objects used to manage the cards. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.27 | Groupethernet1x10GHighPerCardGroup | current | A collection of objects used to manage the cards. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.28 | GroupethernetFE36ECardGroup | current | A collection of objects used to manage the cards. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.29 | GroupnteGe114SHCardGroup | current | A collection of objects used to manage the GE114SH Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.30 | GroupnteGe114SCardGroup | current | A collection of objects used to manage the GE114S Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.31 | Groupge8ECCCardGroup | current | A collection of objects used to manage the GE 8E CC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.32 | GroupneLLDPParamsGroup | current | A collection of objects used to manage the LLDP params on NE. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.33 | GroupnteSh1PcsCardGroup | current | A collection of objects used to manage the SH1PCS Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.34 | GroupnteOsa5411CardGroup | current | A collection of objects used to manage the OSA5411 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.35 | GroupnteGe112ProCardGroup | current | A collection of objects used to manage the GE112Pro Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.36 | GroupnteGe112ProMCardGroup | current | A collection of objects used to manage the GE112ProM Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.37 | GroupnteGe114ProCardGroup | current | A collection of objects used to manage the GE114Pro Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.38 | GroupnteGe114ProCCardGroup | current | A collection of objects used to manage the GE114ProC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.39 | GroupnteGe114ProSHCardGroup | current | A collection of objects used to manage the GE114ProSH Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.40 | GroupnteGe114ProCSHCardGroup | current | A collection of objects used to manage the GE114ProCSH Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.41 | GroupnteGe114ProHECardGroup | current | A collection of objects used to manage the GE114ProHE Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.42 | GroupnteGe112ProHCardGroup | current | A collection of objects used to manage the GE112ProH Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.43 | GroupnteXg210CCardGroup | current | A collection of objects used to manage the XG210 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.44 | GroupgeGE8SCryptoConnectorCardGroup | current | A collection of objects used to manage the GE 8S CC Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.45 | GroupnteOsa5420CardGroup | current | A collection of objects used to manage the OSA5420 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.46 | GroupnteOsa5421CardGroup | current | A collection of objects used to manage the OSA5421 Card. | |
| 1.3.6.1.4.1.2544.1.12.3.2.2.47 | GroupnteGe114GCardGroup | current | A collection of objects used to manage the GE114G Card. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CardType | INTEGER { none (1), psu (2), fan (3), nemi (4), scu (5), eth-10-100-1000-ntu (6), eth-cpmr (7), eth-ge-101(8), eth-ge-206(9), eth-ge-201(10), eth-ge-201se(11), eth-10-100-1000-nte(12), scu-t(13), eth-ge-206f(14), eth-xg-1x(15), swf-140g(16), stu(17), eth-ge-10s(18), ami(19), sti(20), eth-ge-112(21), eth-ge-114(22), eth-ge-206v(23), eth-ge-4e-cc(24), eth-ge-4s-cc(25), eth-xg-210(26), eth-xg-1x-cc(27), eth-xg-1s-cc(28), stm1-4-et(29), pwe3-ocnstm(30), pwe3-e1t1(31), eth-xg-1x-h(32), eth-ge-10s-h(33), eth-t1804(34), eth-t3204(35), eth-ge-syncprobe(36), eth-ge-8s-cc(37), eth-ge-114h(38), eth-ge-114ph(39), eth-fe-36e(40), eth-ge-114sh(41), eth-ge-114s(42), sti-h(43), stu-h(44), eth-ge-8e-cc(45), eth-sh1pcs(46), eth-osa5411(47), ethGe112Pro(48), ethGe112ProM(49), ethGe114Pro(50), ethGe114ProC(51), ethGe114ProSH(52), ethGe114ProCSH(53), ethGe114ProHE(54), ethGe112ProH(55), eth-xg-210c(56), eth-ge-8sc-cc(57), eth-osa5420(58), eth-osa5421(59), bits-x16(60), eth-ge-114g(61) } | current | Card Type. |
| CmCPMRLinkLossFwdMode | INTEGER { llfmode-none(1), llfmode-acc2acc(2), llfmode-net2acc(3), llfmode-both(4) } | current | Link Loss Forwarding Mode on the CPMR. |
| LLDPEnableAction | INTEGER { notApplicable(0), enableLLDP(1), disableLLDP(2), enableLLDPTxOnly(3), enableLLDPRxOnly(4) } | current | Enable (TxAndRx, Tx-Only, Rx-Only) LLDP or Disable LLDP. |
| NeProvAction | INTEGER { accept (1), decline(2) } | current | Network Element Action to accept or decline the Network Element. |
| NetworkElementType | INTEGER { onerackunit (1), hubshelf (2), cle (3), aggregation (4), cpmr (5), ccge101(6), ccge206(7), ccge201(8), ccge201se(9), ccge206f(10), ccge112(11), ccge114(12), ccge206v(13), ccxg210(14), cct1804(15), cct3204(16), ccsyncprobe(17), ccge114h(18), ccge114ph(19), ccge114sh(20), ccge114s(21), sh1pcs(22), ccosa5411(23), ccge112pro(24), ccge112proM(25), ccge114pro(26), ccge114proC(27), ccge114proSH(28), ccge114proCSH(29), ccge114proHE(30), ccge112proH(31), ccxg210c(32), ccosa5420(33), ccosa5421(34), ccge114g(35) } | current | Network Element Type. |
| PortCarrierType | INTEGER { not-applicable (0), t1 (1), e1 (2), t3 (3), e3 (4), oc3 (5), oc12 (6), stm1 (7), stm4 (8) } | current | This attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH. |
| PSNEncapsulationMode | INTEGER { ethernet(1), mpls(2) } | current | OCN/STM Card Mode. |
| PsuType | INTEGER { unknown (0), ac (1), dc (2) } | current | Power Supply Type. |
| PWE3E1T1CardMode | INTEGER { t1-16(1), e1-16(2) } | current | OCN/STM Card Mode. |
| PWE3OCNSTMCardMode | INTEGER { stm4(1), oc12(2), stm1(3), oc3(4) } | current | OCN/STM Card Mode. |
| ShelfAction | INTEGER { initiateLampTest (1), initiateACO(2), coldRestart(3) } | current | Shelf Action. |
| ShelfType | INTEGER { onerackunit (1), hubshelf (2), cle (3), aggregation (4), cpmr (5), onerackunit-ge101(6), onerackunit-ge206(7), onerackunit-ge201(8), onerackunit-ge201se(9), onerackunit-ge206f(10), onerackunit-ge112(11), onerackunit-ge114(12), onerackunit-ge206v(13), onerackunit-xg210(14), onerackunit-t1804(15), onerackunit-t3204(16), onerackunit-syncprobe(17), onerackunit-ge114h(18), onerackunit-ge114ph(19), onerackunit-ge114sh(20), onerackunit-ge114s(21), onerackunit-sh1pcs(22), onerackunit-osa5411(23), onerackunitGe112Pro(24), ge112ProM(25), onerackunitGe114Pro(26), onerackunitGe114ProC(27), onerackunitGe114ProSH(28), onerackunitGe114ProCSH(29), onerackunitGe114ProHE(30), onerackunitGe112ProH(31), onerackunit-xg210c(32), onerackunit-osa5420(33), onerackunit-osa5421(34), onerackunit-ge114g(35) } | current | Shelf Type. |
| SlotType | INTEGER { scu (1), psu (2), fan (3), generic (4), lag (5), nemi (6), stu (7), swf-140g (8), ami (9), sti (10) } | current | Slot Type. |
| SwitchPortAction | INTEGER { not-applicable (0), switch (1) } EthernetNTEGE112CardEntry ::= SEQUENCE { ethernetNTEGE112CardEntityIndex PhysicalIndex, ethernetNTEGE112CardAdminState AdminState, ethernetNTEGE112CardOperationalState OperationalState, ethernetNTEGE112CardSecondaryState SecondaryState, ethernetNTEGE112CardVoltage Integer32, ethernetNTEGE112CardTemperature Integer32, ethernetNTEGE112CardSnmpDyingGaspEnabled TruthValue, ethernetNTEGE112CardRestartAction RestartType, ethernetNTEGE112CardFineGrainedPmInterval CmPmIntervalType, ethernetNTEGE112CardSwitchPortActionPort VariablePointer, ethernetNTEGE112CardSwitchPortAction SwitchPortAction } | current | Switch port action. |