CM-SYSTEM-MIB
202 objects
This module defines the System MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | FileTransferProtocol fsp150cm TrapCounter |
| CM-COMMON-MIB | IpVersion RestartType |
| IF-MIB | InterfaceIndex |
| IPV6-TC | Ipv6Address |
| LLDP-V2-MIB | lldpV2RemEntry |
| LLDP-V2-TC-MIB | LldpV2DestAddressTableIndex |
| SNMP-FRAMEWORK-MIB | SnmpEngineID |
| SNMP-TARGET-MIB | snmpTargetAddrName |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.2 | IdentitycmSystemMIB | This module defines the System MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.2.1 | NodecmSystemObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.1 | NodecmErrorInfoObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.1.1 | ScalarlastSetErrorInformation | read-only | current | This provides detailed information on the last SNMP SET operation failure on the enterprise MIBs. |
| 1.3.6.1.4.1.2544.1.12.2.1.2 | NodecmCliObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.2.1 | ScalarcliCmdPromptPrefix | read-write | current | User specified command prompt prefix, used by the CLI, at the system level. |
| 1.3.6.1.4.1.2544.1.12.2.1.3 | NodecmAccessProtocols | |||
| 1.3.6.1.4.1.2544.1.12.2.1.3.1 | ScalartelnetEnabled | read-write | current | This provides ability to enable/disable the TELNET protocol on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.2 | ScalarsshEnabled | read-write | current | This provides ability to enable/disable the Secure Shell protocol on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.3 | ScalarftpEnabled | read-write | current | This provides ability to enable/disable the File Transfer Protocol (FTP) on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.4 | ScalarscpEnabled | read-write | current | This provides ability to enable/disable the Secure Copy (SCP) on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.5 | ScalarserialPortEnabled | read-write | current | This provides ability to enable/disable the Serial Port on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.6 | ScalarhttpEnabled | read-write | current | This provides ability to enable/disable the HTTP protocol on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.7 | ScalarhttpsEnabled | read-write | current | This provides ability to enable/disable the HTTP protocol on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.8 | ScalarsftpEnabled | read-write | current | This provides ability to enable/disable the SFTP protocol on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.3.9 | ScalartftpEnabled | read-write | current | This provides ability to enable/disable the TFTP protocol on the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.4 | NodecmSysSecObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.4.1 | ScalarsecurityBanner | read-write | current | This provides ability to manage the security banner text used for Graphical User Interface as well as CLI access. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2 | TableaclTable | not-accessible | current | A list of entries corresponding to the access control IP network addresses. Agent provides upto 10 access control IP network addresses to be configured. Access… |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1 | RowaclEntry | not-accessible | current | An entry containing information applicable to a particular Access Control IP Network Address that can be configured. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.1 | ColumnaclEntryIndex | read-only | current | An arbitrary integer index value used to uniquely identify an ACL entry within an ACL. The manager may not assume any particular semantics or meaning to this i… |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.2 | ColumnaclEntryFilterAction | read-only | current | Whether the network IP address specified by aclEntryNetworkAddress and aclEntryNetworkMask has permission to access the system. Currently, only 'permit' is sup… |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.3 | ColumnaclEntryNetworkAddress | read-write | current | The network IP address of the entry that will be permitted to access the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.4 | ColumnaclEntryNetworkMask | read-write | current | The network IP mask of the entry that will be permitted to access the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.5 | ColumnaclEntryEnabled | read-write | current | This enables/disables the entity specified by aclEntryNetworkAddress and aclEntryNetworkMask to access the system. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.6 | ColumnaclEntryIpVersion | read-write | current | This object describe the ip version. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.7 | ColumnaclEntryNetworkIpv6Addr | read-write | current | This object describe the ipv6 adress. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.2.1.8 | ColumnaclEntryPrefixLength | read-write | current | This object describe the ipv6 Prefix length. |
| 1.3.6.1.4.1.2544.1.12.2.1.4.3 | ScalarserialPortDisconnectAutoLogOff | read-write | current | This provides ability to manage the property of the system, which causes Auto Logoff of the user session on the serial port, when the serial port is disconnect… |
| 1.3.6.1.4.1.2544.1.12.2.1.4.4 | ScalarsecurityPromptEnabled | read-write | current | This object allows management of the CLI security prompt. |
| 1.3.6.1.4.1.2544.1.12.2.1.5 | NodecmSysModeObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.5.1 | ScalarntpMode | read-write | current | This provides ability to manage the Network Time Protocol (NTP) mode on the system. Currently, the system only supports 'client' mode. |
| 1.3.6.1.4.1.2544.1.12.2.1.5.2 | ScalarautoProvMode | read-write | current | This provides ability to manage the Auto Provisioning Mode on the system. If the auto provisioning mode is 'off', auto discovery is disabled. Network Elements … |
| 1.3.6.1.4.1.2544.1.12.2.1.5.3 | ScalarsysTimeOfDayType | read-write | current | This object provides ability to configure System Time of Day source. This can be local, ntp or ptp. Before setting sysTimeOfDayType the f3PtpSysTimeOfDayClock … |
| 1.3.6.1.4.1.2544.1.12.2.1.5.4 | ScalarntpServerConfigType | read-write | current | This object describe the ntp server configure type. |
| 1.3.6.1.4.1.2544.1.12.2.1.5.5 | ScalarsysLogServerConfigType | read-write | current | This object describe the sys log server configure type. |
| 1.3.6.1.4.1.2544.1.12.2.1.5.6 | ScalarsysUseUtcLeapOffsetEnable | read-write | current | This attribute indicates whether to use the currentUtcLeapOffset in Announce message from PTP to get UTC time from TAI based timestamps in case we want DM/TWAM… |
| 1.3.6.1.4.1.2544.1.12.2.1.6 | NodecmDatabaseObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.6.1 | ScalardatabaseAction | read-write | current | Initiates a configuration database action. This object is write only. Supported actions are: backup(1) - Backup the saved configuration database. restore(2) - … |
| 1.3.6.1.4.1.2544.1.12.2.1.6.2 | ScalardatabaseLastSaveTime | read-only | current | This object gives value of the last database save time. |
| 1.3.6.1.4.1.2544.1.12.2.1.6.3 | TabledatabaseTable | not-accessible | current | This table lists information about thns. |
| 1.3.6.1.4.1.2544.1.12.2.1.6.3.1 | RowdatabaseEntry | not-accessible | current | A conceptual row in the databaseTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.6.3.1.1 | ColumndatabaseIndex | read-only | current | An arbitrary integer index value used to uniquely identify an entry within the databaseTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.6.3.1.2 | ColumndatabaseType | read-only | current | The type of database partition. |
| 1.3.6.1.4.1.2544.1.12.2.1.6.3.1.3 | ColumndatabaseVersion | read-only | current | The database version string. |
| 1.3.6.1.4.1.2544.1.12.2.1.7 | NodecmSoftwareObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.7.1 | ScalarsoftwareAction | read-write | current | This object is write only. Setting this object initiates the specified action. Supported actions are: install(1) - Install software. schedule-upgrade(2) - Sche… |
| 1.3.6.1.4.1.2544.1.12.2.1.7.2 | ScalarsoftwareUpgradeTime | read-write | current | Specifies the date and time to perform a software upgrade reboot. If this object is set to a date and time in the past or has never been set, the upgrade reboo… |
| 1.3.6.1.4.1.2544.1.12.2.1.7.3 | ScalarsoftwareValidationTimer | read-write | current | Time in minutes before the system will reboot and revert to the active software after a software upgrade. If set to 0, the timer is disabled and the software w… |
| 1.3.6.1.4.1.2544.1.12.2.1.7.4 | TablesoftwareTable | not-accessible | current | This table lists information about the software installed in the active and standby partitions. |
| 1.3.6.1.4.1.2544.1.12.2.1.7.4.1 | RowsoftwareEntry | not-accessible | current | A conceptual row in the softwareTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.7.4.1.1 | ColumnsoftwareIndex | read-only | current | An arbitrary integer index value used to uniquely identify an entry within the softwareTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.7.4.1.2 | ColumnsoftwareType | read-only | current | The type of software partition. |
| 1.3.6.1.4.1.2544.1.12.2.1.7.4.1.3 | ColumnsoftwareVersion | read-only | current | The software version string. |
| 1.3.6.1.4.1.2544.1.12.2.1.8 | NodecmFileServicesObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.8.1 | ScalarfileServicesAction | read-write | current | This object is write only. Setting this object initiates a file transfer Supported actions are: get-database(1) - Copy a backup database from a remote server a… |
| 1.3.6.1.4.1.2544.1.12.2.1.8.2 | ScalarfileServicesMethod | read-write | current | Specifies the method of transferring the file. Note that web(4) is a read-only enumeration. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.3 | ScalarfileServicesServerIp | read-write | current | IP address of the remote server. The value of this object is cleared when fileServicesAction is set. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.4 | ScalarfileServicesUserId | read-write | current | User ID to use to authenticate the file transfer. The value of this object is cleared when fileServicesAction is set. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.5 | ScalarfileServicesPassword | read-write | current | User password to authenticate the file transfer. Reading this object will return an empty string if the password has not been set or ***** if the password has … |
| 1.3.6.1.4.1.2544.1.12.2.1.8.6 | ScalarfileServicesRemoteFile | read-write | current | Path and name of the remote file. The value of this object is cleared when fileServicesAction is set. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.7 | ScalarfileServicesStatus | read-only | current | Status of the user initiated file transfer. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.8 | ScalarfileServicesPercentComplete | read-only | current | Percent completion of operation. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.9 | ScalarfileServicesMode | read-only | current | This object provides information on the current state of file services. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.10 | ScalarfileServicesServerType | read-write | current | This object describe the remote server's address type. |
| 1.3.6.1.4.1.2544.1.12.2.1.8.11 | ScalarfileServicesServerIpv6Addr | read-write | current | IPv6 address of the remote server. The value of this object is cleared when fileServicesAction is set. |
| 1.3.6.1.4.1.2544.1.12.2.1.9 | NodecmLogObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.9.1 | NodecmSysLogObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.9.1.1 | TablesysLogServerTable | not-accessible | current | This table allows configuration of the remote syslog hosts. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1 | RowsysLogServerEntry | not-accessible | current | A conceptual row in the sysLogServerTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.1 | ColumnsysLogServerIndex | read-only | current | An integer index value used to uniquely identify an entry within the sysLogServerTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.2 | ColumnsysLogIpAddress | read-write | current | IP address of the remote syslog server. Value of 0.0.0.0 indicates the sys log server is not configured. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.3 | ColumnsysLogPort | read-write | current | Optional port address of the remote log server. If not specified, the default port for the standard syslog utility (UDP Port 514) will be used. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.4 | ColumnsysLogIpVersion | read-write | current | This object describe the ip version. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.5 | ColumnsysLogIpv6Addr | read-write | current | This object describe the ipv6 address. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.2 | NodecmSecLogObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.9.2.1 | ScalarsecLog2sysLogEnabled | read-write | current | This allows to enable/disable the system security log to syslog. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.3 | NodecmAuditLogObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.9.3.1 | ScalarauditLog2sysLogEnabled | read-write | current | This allows to enable/disable the system audit log to syslog. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.3.2 | ScalarauditLog2fileEnabled | read-write | current | This allows to enable/disable the system audit log to file. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.4 | NodecmAlarmLogObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.9.4.1 | ScalaralarmLog2sysLogEnabled | read-write | current | This allows to enable/disable the system alarm log to syslog. |
| 1.3.6.1.4.1.2544.1.12.2.1.9.4.2 | ScalaralarmLog2fileEnabled | read-write | current | This allows to enable/disable the system alarm log to file. |
| 1.3.6.1.4.1.2544.1.12.2.1.10 | NodecmTimeObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.10.1 | ScalarntpClientEnabled | read-write | current | This allows to enable/disable the NTP client. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.2 | ScalarntpPrimaryServer | read-write | current | IP address of the primary remote NTP time server. Value of 0.0.0.0 indicates the NTP server is not configured. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.3 | ScalarntpBackupServer | read-write | current | IP address of the backup remote NTP time server. Value of 0.0.0.0 indicates the NTP server is not configured. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.4 | ScalarntpType | read-only | current | Type of communication with the remote NTP server. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.5 | ScalarntpActiveServer | read-only | current | Indication of which server is currently active. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.6 | ScalarntpSwitchServer | read-write | current | Operation to switch the NTP Server. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.7 | ScalarntpServerRoundTripDelay | read-only | current | This object provides the round-trip delay (in microseconds) to the NTP Server. It returns a value of 0 if NTP is not enabled. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.8 | ScalarntpServerPrecision | read-only | current | This object provides the precision (in microseconds) to the NTP Server. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.9 | ScalarntpPollingInterval | read-write | current | This object allows ability to configure the NTP polling interval in seconds. Polling interval is the time between successive NTP client requests to update loca… |
| 1.3.6.1.4.1.2544.1.12.2.1.10.10 | ScalarntpPrimaryServerIpVersion | read-write | current | This object describe the ipversion of ntp server. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.11 | ScalarntpPrimaryServerIpv6Addr | read-write | current | This object describe the ipv6 adress of ntp primary server. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.12 | ScalarntpBackupServerIpVersion | read-write | current | This object describe the ipversion of ntp server. |
| 1.3.6.1.4.1.2544.1.12.2.1.10.13 | ScalarntpBackupServerIpv6Addr | read-write | current | This object describe the ipv6 adress of ntp backup server. |
| 1.3.6.1.4.1.2544.1.12.2.1.11 | NodecmSnmpObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.11.1 | Tablef3SnmpTargetAddrExtTable | not-accessible | current | This table is an extension of the standard snmpTargetAddrTable(SNMP-TARGET-MIB). This table is used to manage the SNMP Dying Gasp support. |
| 1.3.6.1.4.1.2544.1.12.2.1.11.1.1 | Rowf3SnmpTargetAddrExtEntry | not-accessible | current | A conceptual row in the f3SnmpTargetAddrExtTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.1 | Columnf3SnmpTargetAddrExtDyingGaspPort | read-only | current | When SNMP Dying Gasp is enabled at Card level, this attribute provides information on the interface (physical port) through which this Target Address is reacha… |
| 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.2 | Columnf3SnmpTargetAddrExtDyingGaspEnabled | read-write | current | When SNMP Dying Gasp is enabled at Card level, this attribute specifies whether this Target Address entry should be used in the SNMP Dying Gasp TRAP PDU or not. |
| 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.3 | Columnf3SnmpTargetAddrExtDyingGaspActive | read-only | current | When SNMP Dying Gasp is enabled at Card level, in case of multiple target addresses resolving to the same interface (port), this flag indicates which target ad… |
| 1.3.6.1.4.1.2544.1.12.2.1.11.1.1.4 | Columnf3SnmpTargetAddrExtBulkTrapsEnabled | read-write | current | Provides ability to enable/disable the Snmp Bulk Traps on the Target Address. |
| 1.3.6.1.4.1.2544.1.12.2.1.11.2 | Scalarf3SnmpEngineID | read-write | current | An SNMP engine's administratively-unique identifier. Please note that f3SnmpEngineID differs from the standard snmpEngineID (SNMP-FRAMEWORK-MIB) with MAX-ACCES… |
| 1.3.6.1.4.1.2544.1.12.2.1.11.3 | Scalarf3SnmpLongIfAlias | read-write | current | This provides ability to enable/disable longer version of ifAlias. If enabled, ifAlias variable can support up to 255 character string and when disabled ifAlia… |
| 1.3.6.1.4.1.2544.1.12.2.1.12 | NodecmResetCauseObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.12.1 | Scalarf3SysLastResetType | read-only | current | This provides the System Last Reset Type. |
| 1.3.6.1.4.1.2544.1.12.2.1.12.2 | Scalarf3SysLastResetCauseType | read-only | current | This provides the System Last Reset Cause Type. |
| 1.3.6.1.4.1.2544.1.12.2.1.12.3 | Scalarf3SysLastAbnormalResetTimestamp1 | read-only | current | This provides the timestamp of the most recent abnormal reset. Note that the system keeps debug logs with 3 most recent abnormal resets. 8 octets of 0 value in… |
| 1.3.6.1.4.1.2544.1.12.2.1.12.4 | Scalarf3SysLastAbnormalResetTimestamp2 | read-only | current | This provides the timestamp of the second most recent abnormal reset. Note that the system keeps debug logs with 3 most recent abnormal resets. 8 octets of 0 v… |
| 1.3.6.1.4.1.2544.1.12.2.1.12.5 | Scalarf3SysLastAbnormalResetTimestamp3 | read-only | current | This provides the timestamp of the third most recent abnormal reset. Note that the system keeps debug logs with 3 most recent abnormal resets. 8 octets of 0 va… |
| 1.3.6.1.4.1.2544.1.12.2.1.13 | Nodef3NotifObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.13.1 | Scalarf3DatabaseSyncTrapObject | not-accessible | current | This object provides the Object Identifier (OID) of the entity that needs to be synchronized. This object is not accessible, it is only carried in the f3Databa… |
| 1.3.6.1.4.1.2544.1.12.2.1.14 | Nodef3ConfigFileObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.14.1 | Scalarf3ConfigFileActionFileName | read-write | current | Configuration File name on which configFileAction is initiated. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.2 | Scalarf3ConfigFileAction | read-write | current | Configuration File action to invoke config file operations. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.3 | Scalarf3ConfigFileStatus | read-only | current | This object provides status of Configuration File actions. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.4 | Scalarf3ConfigFileErrorInformation | read-only | current | This object provides additional information for failed Configuration File actions. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.5 | Tablef3ConfigFileTable | not-accessible | current | This table lists information about the configuration files that are resident on the node. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.5.1 | Rowf3ConfigFileEntry | not-accessible | current | A conceptual row in the f3ConfigFileTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.5.1.1 | Columnf3ConfigFileIndex | not-accessible | current | An arbitrary integer index value used to uniquely identify an entry within the f3ConfigFileTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.5.1.2 | Columnf3ConfigFileName | read-only | current | Name of the configuration file. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.5.1.3 | Columnf3ConfigFileDescription | read-write | current | User description of the configuration file. |
| 1.3.6.1.4.1.2544.1.12.2.1.14.6 | Scalarf3ConfigFilePercentComplete | read-only | current | This object provides configure file percent complete. |
| 1.3.6.1.4.1.2544.1.12.2.1.15 | NodecmFeatureManagementObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.15.1 | Tablef3SystemFeatureTable | not-accessible | current | This table allows ability to manage enabling/disabling system features. |
| 1.3.6.1.4.1.2544.1.12.2.1.15.1.1 | Rowf3SystemFeatureEntry | not-accessible | current | A conceptual row in the f3SystemFeatureTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.15.1.1.1 | Columnf3SystemFeatureIndex | read-only | current | An arbitrary integer index value used to uniquely identify an entry within the f3SystemFeatureTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.15.1.1.2 | Columnf3SystemFeatureName | read-only | current | This object provides the name of the system feature. |
| 1.3.6.1.4.1.2544.1.12.2.1.15.1.1.3 | Columnf3SystemFeatureEnabled | read-write | current | This object allows system feature control. If a specific feature is disabled, the relevant operations to use that feature are denied. |
| 1.3.6.1.4.1.2544.1.12.2.1.16 | NodecmLldpV2DestAdressADVAExtObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.16.1 | Tablef3SystemLldpV2DestAddressADVAExtTable | not-accessible | current | This extension table adds a row status to allow user add/delete/edit the LLDP Destination Address which is defined to Read-Only in the standard MIB. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.1.1 | Rowf3SystemLldpV2DestAddressADVAExtEntry | not-accessible | current | A conceptual row in the f3SystemLldpV2DestAddressADVAExtTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.1.1.1 | Columnf3SystemLldpV2DestAddressADVAExtIndex | not-accessible | current | An arbitrary integer index value used to uniquely identify an entry within the f3SystemLldpV2DestAddressADVAExtTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.1.1.2 | Columnf3SystemLldpV2ADVAExtDestMacAddress | read-write | current | This attribute description the standard MIB about LLDP Destination Mac Address. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.1.1.3 | Columnf3SystemLldpV2DestAddressADVAExtRowStatus | read-write | current | The status of this row. The f3SystemLldpV2DestAddressADVAExtRowStatus object may be modified if the associated instance of this object is equal to active(1), n… |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2 | Tablef3SystemLldpV2PortConfigADVAExtTable | not-accessible | current | This extension table adds a row status to allow user add/delete/edit the LLDP Destination Address for one port. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1 | Rowf3SystemLldpV2PortConfigADVAExtEntry | not-accessible | current | A conceptual row in the f3SystemLldpV2PortConfigADVAExtTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.1 | Columnf3SystemLldpV2PortConfigADVAExtIfIndex | not-accessible | current | The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB. The value of this object is used… |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.2 | Columnf3SystemLldpV2PortConfigADVAExtDestAddressIndex | not-accessible | current | The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the M… |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.3 | Columnf3SystemLldpV2PortConfigADVAExtAdminStatus | read-write | current | The administratively desired status of the local LLDP agent. If the associated f3SystemLldpV2PortConfigADVAExtAdminStatus object is set to a value of 'txOnly(1… |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.4 | Columnf3SystemLldpV2PortConfigADVAExtNotificationEnable | read-write | current | The f3SystemLldpV2PortConfigADVAExtNotificationEnable controls, on a per agent basis, whether or not notifications from the agent are enabled. The value true(1… |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.5 | Columnf3SystemLldpV2PortConfigADVAExtTLVsTxEnable | read-write | current | The f3SystemLldpV2PortConfigADVAExtTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent… |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.6 | Columnf3SystemLldpV2PortConfigADVAExtStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.2.1.7 | Columnf3SystemLldpV2PortConfigADVAExtRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.2.1.16.3 | Tablef3SystemLldpV2ManAddrConfigTxPortsADVAExtTable | not-accessible | current | This extension table adds a row status to allow user add/delete/edit the LLDP Destination Address for one port. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.3.1 | Rowf3SystemLldpV2ManAddrConfigTxPortsADVAExtEntry | not-accessible | current | A conceptual row in the f3SystemLldpV2ManAddrConfigTxPortsADVAExtTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.1 | Columnf3SystemLldpV2ManAddrConfigTxPortsADVAExtRefInterface | not-accessible | current | This object describe the Tx Port is on what interface, its value should be management tunnel or one dcn or none. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.2 | Columnf3SystemLldpV2ManAddrConfigTxPortsADVAExtEnable | read-write | current | This object describe the interface on Tx Ports whether enabled. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.3 | Columnf3SystemLldpV2ManAddrConfigTxPortsADVAExtStorageType | read-create | current | The storage type for this conceptual row. |
| 1.3.6.1.4.1.2544.1.12.2.1.16.3.1.4 | Columnf3SystemLldpV2ManAddrConfigTxPortsADVAExtRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.2.1.17 | Nodef3LldpV2ConfigurationADVAExtObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.17.1 | Scalarf3LldpMaxNeighborsAction | read-write | current | Discard: information selected to be discarded is the information in the current LLDPDU. Delete entry::information selected to be discarded is currently in the … |
| 1.3.6.1.4.1.2544.1.12.2.1.18 | NodesnmpIPv6UDPDomain | |||
| 1.3.6.1.4.1.2544.1.12.2.1.19 | Nodef3RawDataObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.1.19.1 | Scalarf3RawDataServerFtProtocol | read-write | current | Specifies the method of transferring the file. Note that web(4) is a read-only enumeration. |
| 1.3.6.1.4.1.2544.1.12.2.1.19.2 | Scalarf3RawDataServerFtServerName | read-write | current | IP address of the raw data server. Value of 0.0.0.0 indicates the raw data server is not configured. |
| 1.3.6.1.4.1.2544.1.12.2.1.19.3 | Scalarf3RawDataServerFtUserId | read-write | current | User ID to use to authenticate the file transfer. |
| 1.3.6.1.4.1.2544.1.12.2.1.19.4 | Scalarf3RawDataServerFtPasswd | read-write | current | User password to authenticate the file transfer. Reading this object will return an empty string if the password has not been set or ***** if the password has … |
| 1.3.6.1.4.1.2544.1.12.2.1.20 | Nodef3LldpV2RemoteSystemsData | |||
| 1.3.6.1.4.1.2544.1.12.2.1.20.1 | Tablef3LldpV2RemExtTable | not-accessible | current | This table is an extension of the standard lldpV2RemTable (LLDP-V2-MIB). This table adds remote TTL attribute support |
| 1.3.6.1.4.1.2544.1.12.2.1.20.1.1 | Rowf3LldpV2RemExtEntry | not-accessible | current | A conceptual row in the f3LldpV2RemExtTable. |
| 1.3.6.1.4.1.2544.1.12.2.1.20.1.1.1 | Columnf3LldpV2RemTTL | read-only | current | Integer value which indicates the number of seconds that the recipient LLDP agent is to regard the information associated with particular MSAP identifier to be… |
| 1.3.6.1.4.1.2544.1.12.2.2 | NodecmSystemNotifications | |||
| 1.3.6.1.4.1.2544.1.12.2.2.1 | NotificationcmStateChangeTrap | current | This is the State Change Notification per Interface sent by the agent. The actual attribute value is sent by the agent in the form of a varbind list, as additi… | |
| 1.3.6.1.4.1.2544.1.12.2.2.2 | NotificationcmAttributeValueChangeTrap | current | This is the Attribute Value Change Notification sent by the agent. The actual attribute value is sent by the agent in the form of a varbind list, as additional… | |
| 1.3.6.1.4.1.2544.1.12.2.2.3 | NotificationcmObjectCreationTrap | current | This is the Object Creation Notification sent by the agent. The index value of the SNMP Row that is created is sent by the agent in the form of a varbind list,… | |
| 1.3.6.1.4.1.2544.1.12.2.2.4 | NotificationcmObjectDeletionTrap | current | This is the Object Deletion Notification sent by the agent. The index value of the SNMP Row that is deleted is sent by the agent in the form of a varbind list,… | |
| 1.3.6.1.4.1.2544.1.12.2.2.5 | NotificationcmSnmpDyingGaspTrap | current | This is the Dying Gasp SNMP trap sent by the agent. | |
| 1.3.6.1.4.1.2544.1.12.2.2.6 | Notificationf3DatabaseSyncTrap | current | This is the Database Synchronization trap sent by the agent for bulk operations. The var bind list can contain multiple variables with OIDs as f3DatabaseSyncTr… | |
| 1.3.6.1.4.1.2544.1.12.2.3 | NodecmSystemConformance | |||
| 1.3.6.1.4.1.2544.1.12.2.3.1 | NodecmSystemCompliances | |||
| 1.3.6.1.4.1.2544.1.12.2.3.1.1 | CompliancecmSystemCompliance | current | Describes the requirements for conformance to the CM System group. | |
| 1.3.6.1.4.1.2544.1.12.2.3.2 | NodecmSystemGroups | |||
| 1.3.6.1.4.1.2544.1.12.2.3.2.1 | GroupcmSystemObjectGroup | current | A collection of objects used to manage the CM System group. | |
| 1.3.6.1.4.1.2544.1.12.2.3.2.2 | GroupcmSystemNotifGroup | current | A collection of notifications used in the CM System group. | |
| 1.3.6.1.4.1.2544.1.12.2.3.2.3 | GroupcmSystemObjectGroupCmHub | current | A collection of objects used to manage the CM System group. | |
| 1.3.6.1.4.1.2544.1.12.2.3.3 | Nodef3SystemBulkGroups | |||
| 1.3.6.1.4.1.2544.1.12.2.3.3.1 | Groupf3SystemObjectBulkGroup | current | A collection of objects used to manage the F3 System Bulk group. | |
| 1.3.6.1.4.1.2544.1.12.2.3.3.2 | Groupf3SystemNotifBulkGroup | current | A collection of notifications used in the F3 System Bulk group. | |
| 1.3.6.1.4.1.2544.1.12.2.4 | Nodef3BulkNotifObjects | |||
| 1.3.6.1.4.1.2544.1.12.2.4.1 | Scalarf3StartNeEventLogIndex | read-only | current | This object provides the associated neEventsLogged counter for the logged first event (trap) in the bulk trap. |
| 1.3.6.1.4.1.2544.1.12.2.4.2 | Scalarf3EndNeEventLogIndex | read-only | current | This object provides the associated neEventsLogged counter for the logged last event (trap) in the bulk trap. |
| 1.3.6.1.4.1.2544.1.12.2.5 | Nodef3SystemBulkNotifications | |||
| 1.3.6.1.4.1.2544.1.12.2.5.1 | Notificationf3BulkTrap | current | This is the bulk trap sent by the agent for bulk operations. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CmAclFilterAction | INTEGER { permit (1), deny (2) } | current | Enumerations for Access Control List permit - Permit access, deny - Deny access. |
| CmAutoProvMode | INTEGER { off (1), confirm (2), auto (3) } | current | Enumerations for Auto Provisioning Mode off - manual mode, confirm - auto provisioning with confirmation auto - true auto provisioning. |
| CmFileServicesMode | INTEGER { idle(1), dbupload(2), dbdownload(3), dbbackup(4), dbrestore(5), swdownload(6), swinstall(7), swupgrade(8), swvalidate(9), swcancelupgrade(10), swrevert(11), rebooting(12), debugfileupload(13), securitylogfileupload(14), alarmlogfileupload(15), auditlogfileupload(16), dbpropagate(17), swpropagate(18), sysdiagfileupload(19), sysdiagfilesave(20), configfileupload(21), configfiledownload(22), defaultvalsfiledownload(23), satresultupload(24) } | current | File Services Operation. idle - Idle and available. dbupload - Database upload in progress. dbdownload - Database download in progress. dbbackup - Database backup in progress. dbrestore - Database restore in progress. s… |
| CmFileServicesStatus | INTEGER { in-progress(1), success(2), login-failed(3), file-not-found(4), permission-denied(5), server-unreachable(6), no-space-left(7), invalid-file-type(8), nobackup-database(9), no-sw-toinstall(10), sw-not-installed(11), validation-timer-notactive(12), cannot-revert(13), install-failed(14), upgrade-failed(15), revert-failed(16), failure(17), badarchive(18), incompatarchive(19), swVersionNotApproved(20) } | current | Status of the user initiated file transfer. in-progress - File transfer / processing is in progress. success - File transfer and processing completed successfully. login-failed - Login failed. file-not-found - File not … |
| CmFileTransferMethod | INTEGER { ftp (1), scp (2), sftp (3), web (4) } | current | Enumerations for File Transfer Methods ftp - FTP scp - SCP sftp- Secure FTP web - WEB based, this is a read-only. |
| CmNtpMode | INTEGER { client (1), server (2), both (3) } | current | Enumerations for NTP Types client, server, both. |
| CmNtpServerType | INTEGER { not-applicable(0), primary (1), secondary (2) } | current | Enumerations for NTP Server Types primary secondary . |
| CmNtpType | INTEGER { unicast (1) } | current | Enumerations for NTP Types unicast multicast anycast . |
| CmRestartCauseType | INTEGER { poweronreset(1), userinitiated(2), unreoverableappevent(3), unrecoverablesysevent(4), hwwatchdogexpired(5), bustxntimeout(6), hardware(7) } | current | System Restart Cause Type. poweronreset - Interruption of power. userinitiated - User initiated such as software upgrade, restore database, restore system defaults, restore factory defaults unrecoverableappevent - Unrec… |
| CmVersionType | INTEGER { active (1), standby (2), staging (3) } | current | Enumerations for Version Type active, standby. |
| F3ConfigFileAction | INTEGER { none(0), restart-with-file(1), save-delta(2), remove(3), save-full(4), load-config(5) } | current | Defines the actions on configuration file. none - Unused value restart-with-file - Restart the system; System will revert to using system defaults and will apply the specified configuration files on restart save-delta -… |
| F3ConfigFileStatus | INTEGER { not-applicable(0), initial(1), in-progress(2), completed(3), failed(4) } | current | Defines the status of configuration file actions. initial - Initial status in-progress - Configuration File Operation is in progress completed - Configuration File Operation completed failed - Configuration File Operati… |
| FileTransferServerType | INTEGER { ipaddr (1), ipv6addr (2), hostname (3), url (4) } | current | Defines the file transfer server Type. ipaddr - server ipv4 address ipv6addr - server ipv6 address hostname - server host name URL - the URL of the remote server |
| LldpV2ConfigurationADVAExtMaxNeighborsAction | INTEGER { delete-entry(1), discard-lldppdu(2) } | current | Discard: information selected to be discarded is the information in the current LLDPDU. Deleteentry:information selected to be discarded is currently in the LLDP remote systems MIB. |
| ServerConfigType | INTEGER { dhcp (1), userdefined (2) } | current | Defines the file transfer server Type. DHCP - Server is assigned by DHCP server USERDEFINED - server assinged with user configuration. |
| TimeOfDayType | INTEGER { local(1), ntp(2), ptp(3), timeclock(4) } | current | Defines the System Time Of Day Type. local - System time driven by local clock ntp - System time driven by NTP client ptp - System time driven by PTP Telecom Slave timeclock - Sytem time driven by time clock |