CROUTE-MIB
393 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.31 | Nodecroute | |||
| 1.3.6.1.4.1.81.31.1 | NodeipRoute | |||
| 1.3.6.1.4.1.81.31.1.1 | NodeipGlobals | |||
| 1.3.6.1.4.1.81.31.1.1.1 | ScalaripGlobalsBOOTPRelayStatus | read-write | mandatory | Whenever to activate the BOOTP Relay protocol on the device. enable - set by the user, means activate the BOOTP Relay protocol over the defined VLANs. disable … |
| 1.3.6.1.4.1.81.31.1.1.2 | ScalaripGlobalsICMPErrMsgEnable | read-write | mandatory | Whenever to send ICMP messages such as Destination Unreachable, etc. |
| 1.3.6.1.4.1.81.31.1.1.3 | ScalaripGlobalsARPInactiveTimeout | read-write | mandatory | Time-out required to remove inactive ARP entries. The value is in seconds. The default value is 4 hours |
| 1.3.6.1.4.1.81.31.1.1.4 | ScalaripGlobalsPrimaryManagementIPAddress | read-write | mandatory | The Primary Management IP address. One of the device's IP interfaces that is used for some applications. |
| 1.3.6.1.4.1.81.31.1.1.5 | ScalaripGlobalsNextPrimaryManagementIPAddress | read-write | mandatory | The Primary Management Interface IP address for the next boot. The PMI address is used as source address for some applications (tftp/ftp/telnet clients, Media … |
| 1.3.6.1.4.1.81.31.1.2 | TableipInterfaceTable | not-accessible | mandatory | This table is an extention of MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.81.31.1.2.1 | RowipInterfaceEntry | not-accessible | mandatory | The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet. |
| 1.3.6.1.4.1.81.31.1.2.1.1 | ColumnipInterfaceAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.81.31.1.2.1.2 | ColumnipInterfaceNetMask | read-write | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.81.31.1.2.1.3 | ColumnipInterfaceLowerIfAlias | read-write | mandatory | This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and p… |
| 1.3.6.1.4.1.81.31.1.2.1.4 | ColumnipInterfaceType | read-write | mandatory | The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast |
| 1.3.6.1.4.1.81.31.1.2.1.5 | ColumnipInterfaceForwardIpBroadcast | read-write | mandatory | Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet. |
| 1.3.6.1.4.1.81.31.1.2.1.6 | ColumnipInterfaceBroadcastAddr | read-write | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.81.31.1.2.1.7 | ColumnipInterfaceProxyArp | read-write | mandatory | When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer … |
| 1.3.6.1.4.1.81.31.1.2.1.8 | ColumnipInterfaceStatus | read-write | mandatory | For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes d… |
| 1.3.6.1.4.1.81.31.1.2.1.9 | ColumnipInterfaceMainRouterAddr | read-write | mandatory | The IP address of the main router backed up on this interface. |
| 1.3.6.1.4.1.81.31.1.2.1.10 | ColumnipInterfaceARPServerStatus | read-write | mandatory | Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disa… |
| 1.3.6.1.4.1.81.31.1.2.1.11 | ColumnipInterfaceName | read-write | mandatory | The name of this interface for compatibility with cli. |
| 1.3.6.1.4.1.81.31.1.2.1.12 | ColumnipInterfaceNetbiosRebroadcast | read-write | mandatory | inbound - netbios received from the interface are rebarodcasted, outbound - netbios are rebraodcasted to this interface, both - netbios are rebroadacsted both … |
| 1.3.6.1.4.1.81.31.1.2.1.13 | ColumnipInterfaceIcmpRedirects | read-write | mandatory | enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - dis… |
| 1.3.6.1.4.1.81.31.1.2.1.14 | ColumnipInterfaceOperStatus | read-only | mandatory | The operational status of this interface. up - the interface is active. down - the interface is inactive. |
| 1.3.6.1.4.1.81.31.1.2.1.15 | ColumnipInterfaceDhcpRelay | read-write | mandatory | enable - enable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface. Requires that a relayEntry for the L2 interface over which this IP… |
| 1.3.6.1.4.1.81.31.1.2.1.16 | ColumnipInterfaceAddrType | read-only | mandatory | This Mib item presents the type of the the ip address whether is static, unnumbered or dynamic using two of the following methods: pppipcp (negotiated) or dhcp. |
| 1.3.6.1.4.1.81.31.1.2.1.17 | ColumnipInterfaceAddrUnnumbered | read-only | mandatory | The IP address that is borrowed for the unnumbered interface. In case this IP address is not valid then 0.0.0.0. If the current IP interface borrow the IP addr… |
| 1.3.6.1.4.1.81.31.1.2.1.18 | ColumnipInterfaceUnnumberedLowerIfAlias | read-write | mandatory | This object is an 'alias' name for the lower-layer interface used to borrow the IP unnumbered. In case the IP interface is not unnumbered then this value is nu… |
| 1.3.6.1.4.1.81.31.1.2.1.19 | ColumnipInterfaceReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.81.31.1.3 | NoderipGlobals | |||
| 1.3.6.1.4.1.81.31.1.3.1 | ScalarripGlobalsRIPEnable | read-write | mandatory | Whenever to activate the RIP protocol on the device. disable - don't activate RIP over all the IP interfaces enable - the status of each interface is relevant |
| 1.3.6.1.4.1.81.31.1.3.2 | ScalarripGlobalsLeakOSPFIntoRIP | read-write | mandatory | Whenever to leak (redistribute) routes learned from OSPF protocol into the domain of the RIP protocol. |
| 1.3.6.1.4.1.81.31.1.3.3 | ScalarripGlobalsLeakStaticIntoRIP | read-write | mandatory | Whenever to leak (redistribute) routes learned from Static Route into the domain of the RIP protocol. |
| 1.3.6.1.4.1.81.31.1.3.4 | ScalarripGlobalsPeriodicUpdateTimer | read-write | mandatory | The time in seconds between periodic RIP updates. The default value is 30 seconds |
| 1.3.6.1.4.1.81.31.1.3.5 | ScalarripGlobalsPeriodicInvalidRouteTimer | read-write | mandatory | The interval in seconds after which a route is declared invalid. The default value is 180 seconds |
| 1.3.6.1.4.1.81.31.1.3.6 | ScalarripGlobalsDefaultExportMetric | read-write | mandatory | The default metric for redistributed routes. The default value is 1 |
| 1.3.6.1.4.1.81.31.1.4 | TableripInterfaceTable | not-accessible | mandatory | This table is an extention of rip2IfConfTable, and is used to add/delete objects entries to/from that table. |
| 1.3.6.1.4.1.81.31.1.4.1 | RowripInterfaceEntry | not-accessible | mandatory | The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet. |
| 1.3.6.1.4.1.81.31.1.4.1.1 | ColumnripInterfaceAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.81.31.1.4.1.2 | ColumnripInterfaceMetric | read-write | mandatory | This variable indicates the number of hops that is to be assign to that interface. |
| 1.3.6.1.4.1.81.31.1.4.1.3 | ColumnripInterfaceSplitHorizon | read-write | mandatory | Whether to activate Poison Reverse algorithm, Split Horizon or none of them, on this interface |
| 1.3.6.1.4.1.81.31.1.4.1.4 | ColumnripInterfaceAcceptDefaultRoute | read-write | mandatory | Whether to accept the default route from receive RIP message. |
| 1.3.6.1.4.1.81.31.1.4.1.5 | ColumnripInterfaceSendDefaultRoute | read-write | mandatory | Whether to send the default route in RIP message. |
| 1.3.6.1.4.1.81.31.1.4.1.6 | ColumnripInterfaceState | read-only | mandatory | The operational (mandatory state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. in… |
| 1.3.6.1.4.1.81.31.1.4.1.7 | ColumnripInterfaceSendMode | read-write | mandatory | What the router sends on this interface. All - send the whole routing table according to the RIP version. DefaultOnly - send default route only. DoNotDend - do… |
| 1.3.6.1.4.1.81.31.1.4.1.8 | ColumnripInterfaceVersion | read-write | mandatory | What RIP information the router sends on this interface. |
| 1.3.6.1.4.1.81.31.1.5 | NodeospfGlobals | |||
| 1.3.6.1.4.1.81.31.1.5.1 | ScalarospfGlobalsLeakRIPIntoOSPF | read-write | mandatory | Whenever to leak (redistribute) routes learned from RIP protocol into the domain of the OSPF protocol. |
| 1.3.6.1.4.1.81.31.1.5.2 | ScalarospfGlobalsLeakStaticIntoOSPF | read-write | mandatory | Whenever to leak (redistribute) routes learned from Static Route into the domain of the OSPF protocol. |
| 1.3.6.1.4.1.81.31.1.5.3 | ScalarospfGlobalsLeakDirectIntoOSPF | read-write | mandatory | Whenever to leak (redistribute) routes learned from Direct into the domain of the OSPF protocol. |
| 1.3.6.1.4.1.81.31.1.5.4 | ScalarospfGlobalsDefaultExportMetric | read-write | mandatory | The default metric for redistributed routes. The default value is 20 |
| 1.3.6.1.4.1.81.31.1.6 | TablerelayTable | not-accessible | mandatory | This table is an extention of vlConfTable, and is used to add/delete DHCP Servers to/from that table. |
| 1.3.6.1.4.1.81.31.1.6.1 | RowrelayEntry | not-accessible | mandatory | The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch. |
| 1.3.6.1.4.1.81.31.1.6.1.1 | ColumnrelayVlIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.81.31.1.6.1.2 | ColumnrelayVlPrimaryServerAddr | read-write | mandatory | The IP address of the primary server, to which the BOOTP/DHCP requests to be sent. |
| 1.3.6.1.4.1.81.31.1.6.1.3 | ColumnrelayVlSeconderyServerAddr | read-write | mandatory | The IP address of the secondary server, to which the BOOTP/DHCP requests to be sent. |
| 1.3.6.1.4.1.81.31.1.6.1.4 | ColumnrelayVlStatus | read-write | mandatory | For deleting an DHCP/BOOTP servers entry. The entry will be deleted upon deleting the corresponding VLAN |
| 1.3.6.1.4.1.81.31.1.6.1.5 | ColumnrelayVlRelayAddr | read-write | mandatory | The IP address of the Relay, i.e. the router's IP address to write in the relayed request (giaddr field in the Bootp packet). When there are multiple IP interf… |
| 1.3.6.1.4.1.81.31.1.7 | NodeipAccessGlobals | |||
| 1.3.6.1.4.1.81.31.1.7.1 | ScalaripAccessControlEnable | read-write | mandatory | Whenever to activate the IP ACCESS CONTROL statements on the device. disable - don't activate IP ACCESS CONTROL over all the IP statements enable - activate IP… |
| 1.3.6.1.4.1.81.31.1.8 | TableipAccessControlTable | not-accessible | mandatory | This table is used to add/delete access control statement to/from that table. |
| 1.3.6.1.4.1.81.31.1.8.1 | RowipAccessControlEntry | not-accessible | mandatory | The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet. |
| 1.3.6.1.4.1.81.31.1.8.1.1 | ColumnipAccessControlIndex | read-only | mandatory | Entry index. |
| 1.3.6.1.4.1.81.31.1.8.1.2 | ColumnipAccessControlSrcAddr | read-write | mandatory | The IP address of the source address. |
| 1.3.6.1.4.1.81.31.1.8.1.3 | ColumnipAccessControlSrcMask | read-write | mandatory | The MASK address of the source address. |
| 1.3.6.1.4.1.81.31.1.8.1.4 | ColumnipAccessControlDstAddr | read-write | mandatory | The IP address of the destination address. |
| 1.3.6.1.4.1.81.31.1.8.1.5 | ColumnipAccessControlDstMask | read-write | mandatory | The MASK address of the destination address. |
| 1.3.6.1.4.1.81.31.1.8.1.6 | ColumnipAccessControlOperation | read-write | mandatory | How to operate the IP ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and repo… |
| 1.3.6.1.4.1.81.31.1.8.1.7 | ColumnipAccessControlActivation | read-write | mandatory | Does the IP ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular. |
| 1.3.6.1.4.1.81.31.1.8.1.8 | ColumnipAccessControlProtocol | read-write | mandatory | Over which protocol does the IP ACCESS CONTROL statement activate. Icmp, Tcp, Udp. None - means IP addresses only |
| 1.3.6.1.4.1.81.31.1.8.1.9 | ColumnipAccessControlApplication | read-write | mandatory | Over which application does the IP ACCESS CONTROL statement activate. The exception are: above1023 can work over TCP or UDP, none can't work over TCP or UDP or… |
| 1.3.6.1.4.1.81.31.1.8.1.10 | ColumnipAccessControlStatus | read-write | mandatory | For create/delete of a IP ACCESS CONTROL statement. |
| 1.3.6.1.4.1.81.31.1.9 | NodeipRedundancyGlobals | |||
| 1.3.6.1.4.1.81.31.1.9.1 | ScalaripRedundancyStatus | read-write | mandatory | Whenever to activate the IP REDUNDANCY mechanism on the device. enable - set by the user, means activate the IP REDUNDANCY mechanism over the defined IP interf… |
| 1.3.6.1.4.1.81.31.1.9.2 | ScalaripRedundancyTimeout | read-write | mandatory | Time-out required to activate the backup process of IP REDUNDANCY. After Time-out the Redundant router assumes that the main (Backuped) router is not operation… |
| 1.3.6.1.4.1.81.31.1.9.3 | ScalaripRedundancyPollingInterval | read-write | mandatory | The polling interval used to poll the Main (Backed up) router. The value is multiply of ipRedundancyTimeout. The value is in seconds. The default value is 3 |
| 1.3.6.1.4.1.81.31.1.10 | NodeipShortcutGlobals | |||
| 1.3.6.1.4.1.81.31.1.10.1 | ScalaripShortcutARPServerStatus | read-write | mandatory | Whenever to activate the ARP Server mechanism on the device. enable - set by the user, means activate the ARP Server mechanism over the defined IP interfaces. … |
| 1.3.6.1.4.1.81.31.1.11 | TableipMulticastInterfaceTable | not-accessible | mandatory | This table is used to update multicast parameters over interfaces already define |
| 1.3.6.1.4.1.81.31.1.11.1 | RowipMulticastInterfaceEntry | not-accessible | mandatory | The information concerning one of this entity's interfaces. |
| 1.3.6.1.4.1.81.31.1.11.1.1 | ColumnipMulticastInterfaceIfIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.81.31.1.11.1.2 | ColumnipMulticastInterfaceSendAll | read-write | mandatory | The user will be able to configure whenever to send the all Multicast packets to this interface. Enable - Enable the user to define this interface, over all th… |
| 1.3.6.1.4.1.81.31.1.11.1.3 | ColumnipMulticastInterfaceState | read-only | mandatory | The mandatory state (operational) of the IP Multicast from IP Multicast point of view. It depends on global ipMRouteEnable status and Multicast interface statu… |
| 1.3.6.1.4.1.81.31.1.11.1.4 | ColumnipMulticastInterfaceStatus | read-write | mandatory | For enable/disable of a IP multicast over an interface. |
| 1.3.6.1.4.1.81.31.1.12 | TabledistributionListTable | not-accessible | mandatory | This table is used to create distribution list for import and exporting route updates |
| 1.3.6.1.4.1.81.31.1.12.1 | RowdistributionListEntry | not-accessible | mandatory | The information concerning each entry in the distribution list |
| 1.3.6.1.4.1.81.31.1.12.1.1 | ColumndistributionListRoutingProtocol | read-only | mandatory | Specifies which routing protocol we are configuring this distribution list for |
| 1.3.6.1.4.1.81.31.1.12.1.2 | ColumndistributionListDirection | read-only | mandatory | Specifies whether this distribution list entry applies to import or export route updates |
| 1.3.6.1.4.1.81.31.1.12.1.3 | ColumndistributionListIfIndex | read-only | mandatory | Specifies the interface for incoming and outgoing updates on which to apply this distribution list. Relevant for RIP import/export and OSPF import policies, ot… |
| 1.3.6.1.4.1.81.31.1.12.1.4 | ColumndistributionListRouteProtocol | read-only | mandatory | Specifies to which routing protocols to apply this distribution list on outgoing updates |
| 1.3.6.1.4.1.81.31.1.12.1.5 | ColumndistributionListProtocolSpecific1 | read-write | mandatory | Specifies a routing protocol specific parameter |
| 1.3.6.1.4.1.81.31.1.12.1.6 | ColumndistributionListProtocolSpecific2 | read-write | mandatory | Specifies a routing protocol specific parameter |
| 1.3.6.1.4.1.81.31.1.12.1.7 | ColumndistributionListProtocolSpecific3 | read-write | mandatory | Specifies a routing protocol specific parameter |
| 1.3.6.1.4.1.81.31.1.12.1.8 | ColumndistributionListProtocolSpecific4 | read-write | mandatory | Specifies a routing protocol specific parameter |
| 1.3.6.1.4.1.81.31.1.12.1.9 | ColumndistributionListProtocolSpecific5 | read-write | mandatory | Specifies a routing protocol specific parameter |
| 1.3.6.1.4.1.81.31.1.12.1.10 | ColumndistributionListAccessListNumber | read-write | mandatory | Specifies the access list number attached to this distribution list |
| 1.3.6.1.4.1.81.31.1.12.1.11 | ColumndistributionListEntryStatus | read-write | mandatory | For adding and deleting distribution list entries |
| 1.3.6.1.4.1.81.31.1.13 | NodeipEZ2RouteMgmt | |||
| 1.3.6.1.4.1.81.31.1.13.1 | TableipEZ2BoostRouterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.1.1 | RowipEZ2BoostRouterEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.1.1.1 | ColumnipEZ2BoostRouterSlot | read-only | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.1.1.2 | ColumnipEZ2BoostRouterBRAddress | read-only | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.1.1.3 | ColumnipEZ2BoostRouterType | read-only | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.1.1.4 | ColumnipEZ2BoostRouterStatus | read-write | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.2 | TableipEZ2RControlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.2.1 | RowipEZ2RControlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.2.1.1 | ColumnipEZ2RControlSlot | read-only | mandatory | |
| 1.3.6.1.4.1.81.31.1.13.2.1.2 | ColumnipEZ2RControlBoostedRoutersTimeout | read-write | mandatory | Set the timeout of EZ2route routers |
| 1.3.6.1.4.1.81.31.1.13.2.1.3 | ColumnipEZ2RControlHostsTimeout | read-write | mandatory | Set the timeout of EZ2route hosts |
| 1.3.6.1.4.1.81.31.1.13.2.1.5 | ColumnipEZ2RControlAutoLearnMode | read-write | mandatory | |
| 1.3.6.1.4.1.81.31.1.14 | NodeipVRRP | |||
| 1.3.6.1.4.1.81.31.1.14.1 | ScalaripVRRPAdminStatus | read-write | mandatory | Global switch to enable/disable VRRP |
| 1.3.6.1.4.1.81.31.1.15 | NodeiphcObjects | |||
| 1.3.6.1.4.1.81.31.1.15.1 | TableiphcControlTable | not-accessible | mandatory | IPHC table |
| 1.3.6.1.4.1.81.31.1.15.1.1 | RowiphcControlEntry | not-accessible | mandatory | An list of iphc configuration parameters |
| 1.3.6.1.4.1.81.31.1.15.1.1.1 | ColumniphcIfIndex | read-only | mandatory | This object represents the interface index of the interface for which iphc parameters are configured. |
| 1.3.6.1.4.1.81.31.1.15.1.1.2 | ColumniphcControlTcpAdminStatus | read-write | mandatory | This object determines whether tcp header compression is enabled on this interface. |
| 1.3.6.1.4.1.81.31.1.15.1.1.3 | ColumniphcTcpSessions | read-write | mandatory | The maximum number of context identifiers for TCP connections on this interface. |
| 1.3.6.1.4.1.81.31.1.15.1.1.4 | ColumniphcNegotiatedTcpSessions | read-only | mandatory | The negotiated number of context identifiers for TCP connections on this interface. |
| 1.3.6.1.4.1.81.31.1.15.1.1.5 | ColumniphcControlRtpAdminStatus | read-write | mandatory | This object determines whether rtp header compression is enabled on this interface. |
| 1.3.6.1.4.1.81.31.1.15.1.1.6 | ColumniphcRtpSessions | read-write | mandatory | The maximum number of context identifiers for RTP connections on this interface. 0 means that no RTP headers will be compressed. |
| 1.3.6.1.4.1.81.31.1.15.1.1.7 | ColumniphcNegotiatedRtpSessions | read-only | mandatory | The negotiated number of context identifiers for Rtp connections on this interface. |
| 1.3.6.1.4.1.81.31.1.15.1.1.8 | ColumniphcControlNonTcpAdminStatus | read-write | mandatory | This object determines whether non tcp header compression is enabled on this interface. |
| 1.3.6.1.4.1.81.31.1.15.1.1.9 | ColumniphcNonTcpSessions | read-write | mandatory | The maximum number of context identifiers for non-TCP, non RTP connections on this interface. 0 means that no non-tcp, non-rtp headers will be compressed. |
| 1.3.6.1.4.1.81.31.1.15.1.1.10 | ColumniphcNegotiatedNonTcpSessions | read-only | mandatory | The negotiated number of context identifiers for non-TCP, non-RTP connections on this interface. |
| 1.3.6.1.4.1.81.31.1.15.1.1.11 | ColumniphcMaxPeriod | read-write | mandatory | The maximum number of compressed packets that can be sent between full headers. |
| 1.3.6.1.4.1.81.31.1.15.1.1.12 | ColumniphcMaxTime | read-write | mandatory | The maximum number of seconds between full headers. |
| 1.3.6.1.4.1.81.31.1.15.1.1.13 | ColumniphcControRtpMinPortNumber | read-write | mandatory | The minimal UDP destination port number to be considered as RTP traffic. |
| 1.3.6.1.4.1.81.31.1.15.1.1.14 | ColumniphcControRtpMaxPortNumber | read-write | mandatory | The maximal UDP destination port number to be considered as RTP traffic. |
| 1.3.6.1.4.1.81.31.1.15.1.1.15 | ColumniphcControlRtpCompressionRatio | read-only | mandatory | The average ratio between the compressed header size and the original header size on this interface. The value is expressed as a percentage value. Used for RTP… |
| 1.3.6.1.4.1.81.31.1.15.1.1.16 | ColumniphcControlNonTcpMode | read-write | mandatory | The non-TCP compression mode. ietf - standard according to RFC 2507. other - D-bit is set, but the order of the random fields is inverted |
| 1.3.6.1.4.1.81.31.1.15.1.1.17 | ColumniphcControlTcpCompressionRatio | read-only | mandatory | The average ratio between the compressed header size and the original header size on this interface. The value is expressed as a percentage value. Used for TCP… |
| 1.3.6.1.4.1.81.31.1.15.1.1.18 | ColumniphcControlTotalCompressionRatio | read-only | mandatory | The average ratio between the compressed header size and the original header size on this interface. The value is expressed as a percentage value. Used for the… |
| 1.3.6.1.4.1.81.31.1.16 | TableospfXtndIfTable | not-accessible | mandatory | This table provides an extension to the standard OSPF Interface Table, ospfIfTable, as defined in RFC 1253, RFC1850. |
| 1.3.6.1.4.1.81.31.1.16.1 | RowospfXtndIfEntry | not-accessible | mandatory | An entry describes one interface from the view point of OSPF. |
| 1.3.6.1.4.1.81.31.1.16.1.1 | ColumnospfXtndIfIpAddress | read-only | mandatory | Equivalent to ospfIfIpAddress in the standard ospfIfTable. The IP address of this OSPF interface. |
| 1.3.6.1.4.1.81.31.1.16.1.2 | ColumnospfXtndIfAddressLessIf | read-only | mandatory | Equivalent to ospfAddressLessIf in the standard ospfIfTable. For the purpose of easing the instancing of addressed and addressless interfaces; This variable ta… |
| 1.3.6.1.4.1.81.31.1.16.1.3 | ColumnospfXtndIfPassiveMode | read-write | mandatory | determines whether this OSPF interface is in active or passive mode. |
| 1.3.6.1.4.1.81.31.1.17 | NodenextHop | |||
| 1.3.6.1.4.1.81.31.1.17.1 | TablenextHopListTable | not-accessible | mandatory | This table configures the next hop lists parameters. |
| 1.3.6.1.4.1.81.31.1.17.1.1 | RownextHopListEntry | not-accessible | mandatory | next Hop list parameters. |
| 1.3.6.1.4.1.81.31.1.17.1.1.1 | ColumnnextHopListIndex | read-only | mandatory | next Hop List Index. |
| 1.3.6.1.4.1.81.31.1.17.1.1.2 | ColumnnextHopListName | read-write | mandatory | next Hop list name. |
| 1.3.6.1.4.1.81.31.1.17.1.1.3 | ColumnnextHopListRowStatus | read-write | mandatory | Used for creation/deletion of a list and for monitoring list status. Use createAndGo (4) to create a list. Destroy (6) to destroy a list. active(1), notInServi… |
| 1.3.6.1.4.1.81.31.1.17.1.1.4 | ColumnnextHopListActive | read-only | mandatory | State whether the next hop list is active or not. |
| 1.3.6.1.4.1.81.31.1.17.2 | TablenextHopTable | not-accessible | mandatory | Next Hop IP/Interface table. Each next hop List may contain several next hops. |
| 1.3.6.1.4.1.81.31.1.17.2.1 | RownextHopEntry | not-accessible | mandatory | next hop parameters. |
| 1.3.6.1.4.1.81.31.1.17.2.1.1 | ColumnnextHopIndex | read-only | mandatory | next hop index in the next hop list. |
| 1.3.6.1.4.1.81.31.1.17.2.1.2 | ColumnnextHopType | read-only | mandatory | Type of the next hop. 1 - IP address - next jop IP address. 2 - Interface - next hop interface. 3 - Null0 - Interface Null0 for dropping packets. |
| 1.3.6.1.4.1.81.31.1.17.2.1.3 | ColumnnextHopIP | read-write | mandatory | next hop IP address |
| 1.3.6.1.4.1.81.31.1.17.2.1.4 | ColumnnextHopInterface | read-write | mandatory | next hop interface - null0, GRE Tunnel, Serial. |
| 1.3.6.1.4.1.81.31.1.17.2.1.5 | ColumnnextHopStatus | read-only | mandatory | Presents whether this next hop is available or not. 1 - UP 2 - Down The status is used to for choosing the first IP/Interface UP/Valid in the next hop list. |
| 1.3.6.1.4.1.81.31.1.17.2.1.6 | ColumnnextHopRowStatus | read-write | mandatory | Used for creation/deletion of a next hop entry and for monitoring entry status. 1) create the next-hop entry by setting nextHopRowStatus==CreateAndWait At this… |
| 1.3.6.1.4.1.81.31.1.17.2.1.7 | ColumnnextHopTrackId | read-write | mandatory | Bind the status of this next hop to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means th… |
| 1.3.6.1.4.1.81.31.1.18 | TableospfCompleteIfTable | not-accessible | mandatory | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.81.31.1.18.1 | RowospfCompleteIfEntry | not-accessible | mandatory | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. |
| 1.3.6.1.4.1.81.31.1.18.1.1 | ColumnospfCompleteIfIpAddress | read-only | mandatory | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.81.31.1.18.1.2 | ColumnospfCompleteAddressLessIf | read-only | mandatory | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.81.31.1.18.1.3 | ColumnospfCompleteIfAreaId | read-write | mandatory | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.81.31.1.18.1.4 | ColumnospfCompleteIfType | read-write | mandatory | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 80… |
| 1.3.6.1.4.1.81.31.1.18.1.5 | ColumnospfCompleteIfAdminStat | read-write | mandatory | The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The va… |
| 1.3.6.1.4.1.81.31.1.18.1.6 | ColumnospfCompleteIfRtrPriority | read-write | mandatory | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.81.31.1.18.1.7 | ColumnospfCompleteIfTransitDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.81.31.1.18.1.8 | ColumnospfCompleteIfRetransInterval | read-write | mandatory | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.81.31.1.18.1.9 | ColumnospfCompleteIfHelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.81.31.1.18.1.10 | ColumnospfCompleteIfRtrDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.81.31.1.18.1.11 | ColumnospfCompleteIfPollInterval | read-write | mandatory | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.81.31.1.18.1.12 | ColumnospfCompleteIfState | read-only | mandatory | The OSPF Interface State. |
| 1.3.6.1.4.1.81.31.1.18.1.13 | ColumnospfCompleteIfDesignatedRouter | read-only | mandatory | The IP Address of the Designated Router. |
| 1.3.6.1.4.1.81.31.1.18.1.14 | ColumnospfCompleteIfBackupDesignatedRouter | read-only | mandatory | The IP Address of the Backup Designated Router. |
| 1.3.6.1.4.1.81.31.1.18.1.15 | ColumnospfCompleteIfEvents | read-only | mandatory | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.81.31.1.18.1.16 | ColumnospfCompleteIfAuthKey | read-write | mandatory | The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero … |
| 1.3.6.1.4.1.81.31.1.18.1.17 | ColumnospfCompleteIfStatus | read-write | mandatory | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.81.31.1.18.1.18 | ColumnospfCompleteIfMulticastForwarding | read-write | mandatory | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.81.31.1.18.1.19 | ColumnospfCompleteIfDemand | read-write | mandatory | Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this i… |
| 1.3.6.1.4.1.81.31.1.18.1.20 | ColumnospfCompleteIfAuthType | read-write | mandatory | The authentication type specified for an in- terface. Additional authentication types may be assigned locally. |
| 1.3.6.1.4.1.81.31.1.19 | TableospfCompleteIfMetricTable | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.81.31.1.19.1 | RowospfCompleteIfMetricEntry | not-accessible | mandatory | A particular TOS metric for a non-virtual in- terface identified by the interface index. |
| 1.3.6.1.4.1.81.31.1.19.1.1 | ColumnospfCompleteIfMetricIpAddress | read-only | mandatory | The IP address of this OSPF interface. On row creation, this can be derived from the in- stance. |
| 1.3.6.1.4.1.81.31.1.19.1.2 | ColumnospfCompleteIfMetricAddressLessIf | read-only | mandatory | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the valu… |
| 1.3.6.1.4.1.81.31.1.19.1.3 | ColumnospfCompleteIfMetricTOS | read-only | mandatory | The type of service metric being referenced. On row creation, this can be derived from the instance. |
| 1.3.6.1.4.1.81.31.1.19.1.4 | ColumnospfCompleteIfMetricValue | read-write | mandatory | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.81.31.1.19.1.5 | ColumnospfCompleteIfMetricStatus | read-write | mandatory | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.81.31.1.20 | Tablerip2CompleteIfStatTable | not-accessible | mandatory | A list of subnets which require separate status monitoring in RIP. |
| 1.3.6.1.4.1.81.31.1.20.1 | Rowrip2CompleteIfStatEntry | not-accessible | mandatory | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.4.1.81.31.1.20.1.1 | Columnrip2CompleteIfStatAddress | read-only | mandatory | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.81.31.1.20.1.2 | Columnrip2CompleteIfStatRcvBadPackets | read-only | mandatory | The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command… |
| 1.3.6.1.4.1.81.31.1.20.1.3 | Columnrip2CompleteIfStatRcvBadRoutes | read-only | mandatory | The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric). |
| 1.3.6.1.4.1.81.31.1.20.1.4 | Columnrip2CompleteIfStatSentUpdates | read-only | mandatory | The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information. |
| 1.3.6.1.4.1.81.31.1.20.1.5 | Columnrip2CompleteIfStatStatus | read-write | mandatory | Writing invalid has the effect of deleting this interface. |
| 1.3.6.1.4.1.81.31.1.21 | Tablerip2CompleteIfConfTable | not-accessible | mandatory | A list of subnets which require separate configuration in RIP. |
| 1.3.6.1.4.1.81.31.1.21.1 | Rowrip2CompleteIfConfEntry | not-accessible | mandatory | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.4.1.81.31.1.21.1.1 | Columnrip2CompleteIfConfAddress | read-only | mandatory | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.81.31.1.21.1.2 | Columnrip2CompleteIfConfDomain | read-write | obsolete | Value inserted into the Routing Domain field of all RIP packets sent on this interface. |
| 1.3.6.1.4.1.81.31.1.21.1.3 | Columnrip2CompleteIfConfAuthType | read-write | mandatory | The type of Authentication used on this interface. |
| 1.3.6.1.4.1.81.31.1.21.1.4 | Columnrip2CompleteIfConfAuthKey | read-write | mandatory | The value to be used as the Authentication Key whenever the corresponding instance of rip2CompleteIfConfAuthType has a value other than noAuthentication. A mod… |
| 1.3.6.1.4.1.81.31.1.21.1.5 | Columnrip2CompleteIfConfSend | read-write | mandatory | What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates usi… |
| 1.3.6.1.4.1.81.31.1.21.1.6 | Columnrip2CompleteIfConfReceive | read-write | mandatory | This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets. |
| 1.3.6.1.4.1.81.31.1.21.1.7 | Columnrip2CompleteIfConfDefaultMetric | read-write | mandatory | This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that n… |
| 1.3.6.1.4.1.81.31.1.21.1.8 | Columnrip2CompleteIfConfStatus | read-write | mandatory | Writing invalid has the effect of deleting this interface. |
| 1.3.6.1.4.1.81.31.1.21.1.9 | Columnrip2CompleteIfConfSrcAddress | read-write | mandatory | The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2CompleteIfConfAddr… |
| 1.3.6.1.4.1.81.31.1.22 | TableipCidrRouteStaticTable | not-accessible | mandatory | Static Route Table |
| 1.3.6.1.4.1.81.31.1.22.1 | RowipCidrRouteStaticEntry | not-accessible | mandatory | A particular route to a particular destina- tion |
| 1.3.6.1.4.1.81.31.1.22.1.1 | ColumnipCidrRouteStaticDest | not-accessible | mandatory | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o… |
| 1.3.6.1.4.1.81.31.1.22.1.2 | ColumnipCidrRouteStaticMask | not-accessible | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteStaticDest field. For those systems tha… |
| 1.3.6.1.4.1.81.31.1.22.1.3 | ColumnipCidrRouteStaticIfIndex | not-accessible | mandatory | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. Note that for regular static routes and for … |
| 1.3.6.1.4.1.81.31.1.22.1.4 | ColumnipCidrRouteStaticNextHop | not-accessible | mandatory | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. Note that for Via interface/DHCP static routes the next-hop is 0.0.0.0. |
| 1.3.6.1.4.1.81.31.1.22.1.5 | ColumnipCidrRouteStaticPreference | not-accessible | mandatory | Preference of the static route. high(0) - High priority route. low(250) - low priority route. In case of Discard route the preference is high(0). |
| 1.3.6.1.4.1.81.31.1.22.1.6 | ColumnipCidrRouteStaticUsedIfIndex | read-only | mandatory | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. When creating regular static route then ther… |
| 1.3.6.1.4.1.81.31.1.22.1.7 | ColumnipCidrRouteStaticUsedNextHop | read-only | mandatory | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. When creating DHCP static route using the default router as next hop then when… |
| 1.3.6.1.4.1.81.31.1.22.1.8 | ColumnipCidrRouteStaticType | read-only | mandatory | Type of the static route. via (1), discard (2), dhcp (3), regular (4) |
| 1.3.6.1.4.1.81.31.1.22.1.9 | ColumnipCidrRouteStaticCost | read-write | mandatory | The static route cost. |
| 1.3.6.1.4.1.81.31.1.22.1.10 | ColumnipCidrRouteStaticPermanent | read-write | mandatory | This MIB item conveys additional information about the route. Permanent(1) - Permanent Static route which is still active even if the next hop is down. Non-Per… |
| 1.3.6.1.4.1.81.31.1.22.1.11 | ColumnipCidrRouteStaticTrackId | read-write | mandatory | Bind the status of this static route to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 mean… |
| 1.3.6.1.4.1.81.31.1.22.1.12 | ColumnipCidrRouteStaticActive | read-only | mandatory | The status of the route. If it is active then it is found on the routing database and affect traffic else it is no found on the routing database and does not a… |
| 1.3.6.1.4.1.81.31.1.22.1.13 | ColumnipCidrRouteStaticRowStatus | read-write | mandatory | The row status variable, used according to row installation and removal conventions. The values that are supported are destroy, create-and-wait,create-and-go, … |
| 1.3.6.1.4.1.81.31.2 | NodeipxRoute | |||
| 1.3.6.1.4.1.81.31.2.1 | TableipxCircTable | not-accessible | mandatory | This table is an extention of Novell mib IpxCircTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.81.31.2.1.1 | RowipxCircEntry | not-accessible | mandatory | The information concerning one of this entity's IPX circuits. An IPX circuit is a logical connection to a certain IPX netNumber. |
| 1.3.6.1.4.1.81.31.2.1.1.1 | ColumnipxCircIndex | read-only | mandatory | The identifier of this circuit, unique within the instance of IPX. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.81.31.2.1.1.2 | ColumnipxCircNetNumber | read-write | mandatory | The IPX network number of this circuit. |
| 1.3.6.1.4.1.81.31.2.1.1.3 | ColumnipxCircLowerIfAlias | read-write | mandatory | This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and p… |
| 1.3.6.1.4.1.81.31.2.1.1.4 | ColumnipxCircEncapsulation | read-write | mandatory | The media type (encapsulation of layer2) of this circuit. |
| 1.3.6.1.4.1.81.31.2.1.1.5 | ColumnipxCircNetbios | read-write | mandatory | The type of the circuit. |
| 1.3.6.1.4.1.81.31.2.1.1.6 | ColumnipxCircStatus | read-write | mandatory | For adding and deleting Circuits. Deleting this row means deleting the corresponding entry in ipxCircTable. Deleting a Circuit also causes deletion of all stat… |
| 1.3.6.1.4.1.81.31.2.1.1.7 | ColumnipxCircRipUpdate | read-write | mandatory | The RIP periodic update interval, in seconds. |
| 1.3.6.1.4.1.81.31.2.1.1.8 | ColumnipxCircRipAgeMultiplier | read-write | mandatory | The holding multiplier for information received in RIP periodic updates. |
| 1.3.6.1.4.1.81.31.2.1.1.9 | ColumnipxCircRipStatus | read-write | mandatory | Indicates whether RIP information may be sent/received over this circuit. Set by the user |
| 1.3.6.1.4.1.81.31.2.1.1.10 | ColumnipxCircSapUpdate | read-write | mandatory | The SAP periodic update interval, in seconds. |
| 1.3.6.1.4.1.81.31.2.1.1.11 | ColumnipxCircSapAgeMultiplier | read-write | mandatory | The holding multiplier for information received in SAP periodic updates. |
| 1.3.6.1.4.1.81.31.2.1.1.12 | ColumnipxCircGetNearestServerReply | read-write | mandatory | Indicates whether to respond to SAP get nearest server requests received on this circuit. |
| 1.3.6.1.4.1.81.31.2.1.1.13 | ColumnipxCircSapStatus | read-write | mandatory | Indicates whether SAP information may be sent/received over this circuit. |
| 1.3.6.1.4.1.81.31.2.1.1.14 | ColumnipxCircRipState | read-only | mandatory | Indicates whether RIP information may be sent/received over this circuit. Set by the device to reflect the RIP status and the interface status |
| 1.3.6.1.4.1.81.31.2.1.1.15 | ColumnipxCircSapState | read-only | mandatory | Indicates whether SAP information may be sent/received over this circuit. Set by the device to reflect the SAP status and the interface status |
| 1.3.6.1.4.1.81.31.2.2 | TableipxDestTable | not-accessible | mandatory | This table replace the Novell mib IpxDestTable, and is used to add/delete entries to/from that table. |
| 1.3.6.1.4.1.81.31.2.2.1 | RowipxDestEntry | not-accessible | mandatory | The information concerning one of this entity's IPX Routes. An IPX service is a logical connection to a certain IPX Server. |
| 1.3.6.1.4.1.81.31.2.2.1.1 | ColumnipxDestNetNum | read-only | mandatory | The IPX network number portion of the IPX address of the destination. |
| 1.3.6.1.4.1.81.31.2.2.1.2 | ColumnipxDestProtocol | read-only | mandatory | The routing protocol from which knowledge of this destination was obtained. |
| 1.3.6.1.4.1.81.31.2.2.1.3 | ColumnipxDestTicks | read-write | mandatory | The delay in ticks to reach this destination. |
| 1.3.6.1.4.1.81.31.2.2.1.4 | ColumnipxDestHopCount | read-write | mandatory | The number of hops necessary to reach the destination. |
| 1.3.6.1.4.1.81.31.2.2.1.5 | ColumnipxDestNextHopCircIndex | read-write | mandatory | The unique identifier of the circuit, used to reach the next hop. |
| 1.3.6.1.4.1.81.31.2.2.1.6 | ColumnipxDestNextHopNICAddress | read-write | mandatory | The NIC address of the next hop. |
| 1.3.6.1.4.1.81.31.2.2.1.7 | ColumnipxDestNextHopNetNum | read-write | mandatory | The IPX network number of the next hop. |
| 1.3.6.1.4.1.81.31.2.2.1.8 | ColumnipxDestStatus | read-write | mandatory | |
| 1.3.6.1.4.1.81.31.2.2.1.9 | ColumnipxDestAge | read-only | mandatory | The age of the Routing table entry. |
| 1.3.6.1.4.1.81.31.2.3 | TableipxServTable | not-accessible | mandatory | This table replace the Novell mib IpxServTable, and is used to add/delete entries to/from that table. |
| 1.3.6.1.4.1.81.31.2.3.1 | RowipxServEntry | not-accessible | mandatory | The information concerning one of this entity's IPX Services. An IPX service is a logical connection to a certain IPX Server. |
| 1.3.6.1.4.1.81.31.2.3.1.1 | ColumnipxServType | read-only | mandatory | The service type. |
| 1.3.6.1.4.1.81.31.2.3.1.2 | ColumnipxServName | read-only | mandatory | The server name. |
| 1.3.6.1.4.1.81.31.2.3.1.3 | ColumnipxServProtocol | read-only | mandatory | The protocol from which knowledge of this service was obtained. |
| 1.3.6.1.4.1.81.31.2.3.1.4 | ColumnipxServNetNum | read-write | mandatory | The IPX network number portion of the IPX address of the service. |
| 1.3.6.1.4.1.81.31.2.3.1.5 | ColumnipxServNode | read-write | mandatory | The node portion of the IPX address of the service. |
| 1.3.6.1.4.1.81.31.2.3.1.6 | ColumnipxServSocket | read-write | mandatory | The socket portion of the IPX address of the service. |
| 1.3.6.1.4.1.81.31.2.3.1.7 | ColumnipxServHopCount | read-write | mandatory | The number of hops to the service. |
| 1.3.6.1.4.1.81.31.2.3.1.8 | ColumnipxServStatus | read-write | mandatory | |
| 1.3.6.1.4.1.81.31.2.3.1.9 | ColumnipxServAge | read-only | mandatory | The age of the SAP entry. |
| 1.3.6.1.4.1.81.31.2.4 | NodeipxAccessGlobals | |||
| 1.3.6.1.4.1.81.31.2.4.1 | ScalaripxAccessControlEnable | read-write | mandatory | Whenever to activate the IPX ACCESS CONTROL statements on the device. disable means don't activate IPX ACCESS CONTROL over all the IPX statements enable means … |
| 1.3.6.1.4.1.81.31.2.5 | TableipxAccessControlTable | not-accessible | mandatory | This table is used to add/delete IPX access control statement to/from that table. |
| 1.3.6.1.4.1.81.31.2.5.1 | RowipxAccessControlEntry | not-accessible | mandatory | The information concerning one of this entity's IPX access control statements. |
| 1.3.6.1.4.1.81.31.2.5.1.1 | ColumnipxAccessControlIndex | read-only | mandatory | Entry index. |
| 1.3.6.1.4.1.81.31.2.5.1.2 | ColumnipxAccessControlSrcAddr | read-write | mandatory | The IPX network of the source address. |
| 1.3.6.1.4.1.81.31.2.5.1.3 | ColumnipxAccessControlDstAddr | read-write | mandatory | The IPX network of the destination address. |
| 1.3.6.1.4.1.81.31.2.5.1.4 | ColumnipxAccessControlOperation | read-write | mandatory | How to operate the IPX ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and rep… |
| 1.3.6.1.4.1.81.31.2.5.1.5 | ColumnipxAccessControlActivation | read-write | mandatory | Does the IPX ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular. |
| 1.3.6.1.4.1.81.31.2.5.1.6 | ColumnipxAccessControlStatus | read-write | mandatory | For create/delete of an IPX ACCESS CONTROL statement. |
| 1.3.6.1.4.1.81.31.2.6 | NodeipxSapFilterGlobals | |||
| 1.3.6.1.4.1.81.31.2.6.1 | ScalaripxSapFilterEnable | read-write | mandatory | Whenever to activate the IPX SAP Filters statements on the device. disable means don't activate IPX SAP Filters over all the IPX SAP statements enable means ac… |
| 1.3.6.1.4.1.81.31.2.7 | TableipxSapFilterTable | not-accessible | mandatory | Table of input/output SAP filter according to IPX circuit number. |
| 1.3.6.1.4.1.81.31.2.7.1 | RowipxSapFilterEntry | not-accessible | mandatory | An entry in the SAP filter table |
| 1.3.6.1.4.1.81.31.2.7.1.1 | ColumnipxSapFilterID | read-only | mandatory | ID of SAP filter. |
| 1.3.6.1.4.1.81.31.2.7.1.2 | ColumnipxSapFilterCircIndex | read-write | mandatory | |
| 1.3.6.1.4.1.81.31.2.7.1.3 | ColumnipxSapFilterServiceNetNumber | read-write | mandatory | Number network of the filtered service. Value 0xFFFFFFFF applies for any network. DEFVAL {0xFFFFFFFF} |
| 1.3.6.1.4.1.81.31.2.7.1.4 | ColumnipxSapFilterServiceType | read-write | mandatory | The type of the service which may be filtered; value 0xFFFF applies for all types of service and it's default DEFVAL {0xFFFF} |
| 1.3.6.1.4.1.81.31.2.7.1.5 | ColumnipxSapFilterServerName | read-write | mandatory | The name of the service which may be filtered; wildcards (*) may be used in the end of the name. DEFVAL {*} |
| 1.3.6.1.4.1.81.31.2.7.1.6 | ColumnipxSapFilterDirection | read-write | mandatory | Type of filter-input or output |
| 1.3.6.1.4.1.81.31.2.7.1.7 | ColumnipxSapFilterAction | read-write | mandatory | Permit/deny receiving/transmitting of SAP entry |
| 1.3.6.1.4.1.81.31.2.7.1.8 | ColumnipxSapFilterStatus | read-write | mandatory | .... |
| 1.3.6.1.4.1.81.31.3 | Nodelayer2 | |||
| 1.3.6.1.4.1.81.31.3.1 | TablevlConfTable | not-accessible | mandatory | This table is an extention of MIB II ifTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.81.31.3.1.1 | RowvlConfEntry | not-accessible | mandatory | The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch. |
| 1.3.6.1.4.1.81.31.3.1.1.1 | ColumnvlConfIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.81.31.3.1.1.2 | ColumnvlConfAlias | read-write | mandatory | This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and p… |
| 1.3.6.1.4.1.81.31.3.1.1.3 | ColumnvlConfStatus | read-write | mandatory | For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed onl… |
| 1.3.6.1.4.1.81.31.3.2 | TablevlBridgeTable | not-accessible | mandatory | For each Bridge segment an entry of this table specifies a set of VLANs, which it contains. |
| 1.3.6.1.4.1.81.31.3.2.1 | RowvlBridgeEntry | not-accessible | mandatory | A entry of this table specifies a Group of VLANs and VLANs belonging to it |
| 1.3.6.1.4.1.81.31.3.2.1.1 | ColumnvlBridgeProtocol | read-only | mandatory | The protocol, supported by this VLAN. The meanings of the values are: other: none of the following. This VLAN includes any protocol except the following protoc… |
| 1.3.6.1.4.1.81.31.3.2.1.2 | ColumnvlBridgeGroupIndex | read-only | mandatory | A logical number, corresponded this group of VLANs |
| 1.3.6.1.4.1.81.31.3.2.1.3 | ColumnvlBridgeIndex | read-only | mandatory | A logical number, corresponded this VLAN. Each VLAN is allowed to participate in ONE group only |
| 1.3.6.1.4.1.81.31.3.2.1.4 | ColumnvlBridgeStatus | read-write | mandatory | It is used to create or delete an entry |
| 1.3.6.1.4.1.81.31.3.3 | Nodelayer2Globals | |||
| 1.3.6.1.4.1.81.31.3.3.1 | Scalarlayer2GlobalsBridgeEnable | read-write | mandatory | Whenever to activate the Bridge capability on the device. enable - set by the user, means activate the Bridge capability over the defined VLANs. disable - set … |
| 1.3.6.1.4.1.81.31.4 | NoderouteGroupMgmt | |||
| 1.3.6.1.4.1.81.31.4.1 | TablerouteGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.31.4.1.1 | RowrouteGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.81.31.4.1.1.1 | ColumnrouteGroupId | read-only | mandatory | |
| 1.3.6.1.4.1.81.31.4.1.1.2 | ColumnrouteGroupRouteMode | read-write | mandatory | A bit mask representing the routing mode of the module: bit 0 - L2 switching bit 1 - EZ2Route bit 2 - Router bit 3 - Rich L2 bit 4 - WebSwitch (Load balance, a… |
| 1.3.6.1.4.1.81.31.5 | NodedrLayer2 | |||
| 1.3.6.1.4.1.81.31.5.1 | TabledrVlConfTable | not-accessible | mandatory | This table is an extention of MIB II ifTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.81.31.5.1.1 | RowdrVlConfEntry | not-accessible | mandatory | The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch. |
| 1.3.6.1.4.1.81.31.5.1.1.1 | ColumndrVlConfSlot | read-only | mandatory | The slot number of the module |
| 1.3.6.1.4.1.81.31.5.1.1.2 | ColumndrVlConfIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.81.31.5.1.1.3 | ColumndrVlConfAlias | read-write | mandatory | This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and p… |
| 1.3.6.1.4.1.81.31.5.1.1.4 | ColumndrVlConfStatus | read-write | mandatory | For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed onl… |
| 1.3.6.1.4.1.81.31.6 | NodedrIpRoute | |||
| 1.3.6.1.4.1.81.31.6.1 | TabledrIpInterfaceTable | not-accessible | mandatory | This table is an extention of MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.81.31.6.1.1 | RowdrIpInterfaceEntry | not-accessible | mandatory | The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet. |
| 1.3.6.1.4.1.81.31.6.1.1.1 | ColumndrIpInterfaceSlot | read-only | mandatory | The slot number of the module |
| 1.3.6.1.4.1.81.31.6.1.1.2 | ColumndrIpInterfaceAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.81.31.6.1.1.3 | ColumndrIpInterfaceNetMask | read-write | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.81.31.6.1.1.4 | ColumndrIpInterfaceLowerIfAlias | read-write | mandatory | This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and p… |
| 1.3.6.1.4.1.81.31.6.1.1.5 | ColumndrIpInterfaceType | read-write | mandatory | The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast |
| 1.3.6.1.4.1.81.31.6.1.1.6 | ColumndrIpInterfaceForwardIpBroadcast | read-write | mandatory | Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet. |
| 1.3.6.1.4.1.81.31.6.1.1.7 | ColumndrIpInterfaceBroadcastAddr | read-write | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.81.31.6.1.1.8 | ColumndrIpInterfaceProxyArp | read-write | mandatory | When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer … |
| 1.3.6.1.4.1.81.31.6.1.1.9 | ColumndrIpInterfaceStatus | read-write | mandatory | For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes d… |
| 1.3.6.1.4.1.81.31.6.1.1.10 | ColumndrIpInterfaceMainRouterAddr | read-write | mandatory | The IP address of the main router backed up on this interface. |
| 1.3.6.1.4.1.81.31.6.1.1.11 | ColumndrIpInterfaceARPServerStatus | read-write | mandatory | Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disa… |
| 1.3.6.1.4.1.81.31.6.1.1.12 | ColumndrIpInterfaceName | read-write | mandatory | The name of this interface for compatibility with cli. |
| 1.3.6.1.4.1.81.31.6.1.1.13 | ColumndrIpInterfaceNetbiosRebroadcast | read-write | mandatory | How to deal with NETBIOS Broadcasts. inbound - netbios broadcasts received from the interface are rebarodcasted outbound - netbios broadcastrs are rebraodcaste… |
| 1.3.6.1.4.1.81.31.6.1.1.14 | ColumndrIpInterfaceIcmpRedirects | read-write | mandatory | enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - dis… |
| 1.3.6.1.4.1.81.31.6.1.1.15 | ColumndrIpInterfaceOperStatus | read-only | mandatory | The operational status of this interface. up - the interface is active. down - the interface is inactive. |
| 1.3.6.1.4.1.81.31.6.1.1.16 | ColumndrIpInterfaceDhcpRelay | read-write | mandatory | enable - enable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface. Requires that a relayEntry for the L2 interface over which this IP… |
| 1.3.6.1.4.1.81.31.7 | NodedrStaticCidr | |||
| 1.3.6.1.4.1.81.31.7.1 | TabledrStaticCidrTable | not-accessible | mandatory | The static route table for this entity. The table includes all static routes, both active and inactive. Note that inactive static routes are deleted from RFC20… |
| 1.3.6.1.4.1.81.31.7.1.1 | RowdrStaticCidrEntry | not-accessible | mandatory | A particular route to a particular destination, under a particular policy. |
| 1.3.6.1.4.1.81.31.7.1.1.1 | ColumndrStaticCidrEntID | read-only | mandatory | The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as ph… |
| 1.3.6.1.4.1.81.31.7.1.1.2 | ColumndrStaticCidrDest | read-only | mandatory | Equivalent to ipCidrRouteDest. The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit… |
| 1.3.6.1.4.1.81.31.7.1.1.3 | ColumndrStaticCidrMask | read-only | mandatory | Equivalent to ipCidrRouteMask. Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the drStaticCidrDest fi… |
| 1.3.6.1.4.1.81.31.7.1.1.4 | ColumndrStaticCidrTos | read-only | mandatory | Equivalent to ipCidrRouteTos. The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the … |
| 1.3.6.1.4.1.81.31.7.1.1.5 | ColumndrStaticCidrNextHop | read-only | mandatory | Equivalent to ipCidrRouteNextHop. On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.81.31.7.1.1.6 | ColumndrStaticCidrIfIndex | read-write | mandatory | Equivalent to ipCidrRouteIfIndex. The ifIndex value which identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.81.31.7.1.1.7 | ColumndrStaticCidrType | read-write | mandatory | Equivalent to ipCidrRouteType. The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a r… |
| 1.3.6.1.4.1.81.31.7.1.1.8 | ColumndrStaticCidrMetric1 | read-write | mandatory | Equivalent to ipCidrRouteMetric1. The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in t… |
| 1.3.6.1.4.1.81.31.7.1.1.9 | ColumndrStaticCidrPrecedence | read-write | mandatory | Equivalent to ipCidrRouteMetric5 (Avaya use of it). The precedence of this routing rule, compared to other routes which may have been learned vie other methods… |
| 1.3.6.1.4.1.81.31.7.1.1.10 | ColumndrStaticCidrCRPType | read-write | mandatory | The internal type of this static routing entry. routingFWLB - Route to a group of routing Firewalls bridgingFWLB - Route through a group of bridging Firewalls … |
| 1.3.6.1.4.1.81.31.7.1.1.11 | ColumndrStaticCidrOperStatus | read-only | mandatory | The operational status of this route. up - the route is active, and is present in ipCidrRouteTable. down - the route is inactive; it is not present in ipCidrRo… |
| 1.3.6.1.4.1.81.31.7.1.1.12 | ColumndrStaticCidrName | read-write | mandatory | A label given to this route by the user. Has no equivalent in ipCidrRouteTable. |
| 1.3.6.1.4.1.81.31.7.1.1.13 | ColumndrStaticOwner | read-write | mandatory | The user who is responsible for the entry. Management Apps should write: 'user on host' CLI should write:CLI_User on local device |
| 1.3.6.1.4.1.81.31.7.1.1.14 | ColumndrStaticCidrStatus | read-write | mandatory | Creation, activation, de-activation and deletion of a static route, using the RowStatus convention: active(1), notInService(2) , notReady(3), createAndGo(4), c… |
| 1.3.6.1.4.1.81.31.8 | NodeipTunnel | |||
| 1.3.6.1.4.1.81.31.8.1 | TableipTunnelTable | not-accessible | mandatory | ipTunnelTable parameters. |
| 1.3.6.1.4.1.81.31.8.1.1 | RowipTunnelEntry | not-accessible | mandatory | ipTunnel Entry Parameters. |
| 1.3.6.1.4.1.81.31.8.1.1.1 | ColumnipTunnelIfIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.81.31.8.1.1.2 | ColumnipTunnelIfStatus | read-write | mandatory | For adding and deleting IP Tunnel interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). |
| 1.3.6.1.4.1.81.31.8.1.1.3 | ColumnipTunnelIfLocalAddress | read-write | mandatory | The address of the local endpoint of the tunnel, or 0.0.0.0 if the device is free to choose any of its addresses at tunnel establishment time. |
| 1.3.6.1.4.1.81.31.8.1.1.4 | ColumnipTunnelIfRemoteAddress | read-write | mandatory | The address of the remote endpoint of the tunnel. |
| 1.3.6.1.4.1.81.31.8.1.1.5 | ColumnipTunnelIfEncapsMethod | read-only | mandatory | The encapsulation method used by the tunnel. |
| 1.3.6.1.4.1.81.31.8.1.1.6 | ColumnipTunnelIfConfigID | read-write | mandatory | An identifier used to distinguish between multiple tunnels of the same encapsulation method, with the same endpoints. If the encapsulation protocol only allows… |
| 1.3.6.1.4.1.81.31.8.1.1.7 | ColumnipTunnelIfHopLimit | read-write | mandatory | The TTL to use in the outer IP header. |
| 1.3.6.1.4.1.81.31.8.1.1.8 | ColumnipTunnelIfSecurity | read-write | mandatory | The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or en… |
| 1.3.6.1.4.1.81.31.8.1.1.9 | ColumnipTunnelIfDSCP | read-write | mandatory | The method used to set the high 6 bits of the TOS in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A value b… |
| 1.3.6.1.4.1.81.31.8.1.1.10 | ColumnipTunnelIfChecksum | read-write | mandatory | Verifying checksum of the GRE header. 1 - Check the checksum. 2 - Do not check the checksum. In case of checksum calaculation does not match to the packet chec… |
| 1.3.6.1.4.1.81.31.8.1.1.11 | ColumnipTunnelIfKey | read-write | mandatory | The Shared Key for the GRE Tunnel. |
| 1.3.6.1.4.1.81.31.8.1.1.12 | ColumnipTunnelIfKeyMode | read-write | mandatory | The mode according which the Key field is checked or not. 1 - Enable Key 2 - Disable Key |
| 1.3.6.1.4.1.81.31.8.1.1.13 | ColumnipTunnelIfOutOfOrderDrop | read-write | mandatory | 1 - Drop the packets in case of out of order packets. 2 - Do not Drop the packets in case of out of order packets. |
| 1.3.6.1.4.1.81.31.8.1.1.14 | ColumnipTunnelIfAgingTimer | read-write | mandatory | The timer (minutes) for aging of path MTU discovery. 0 - Disable aging is done. |
| 1.3.6.1.4.1.81.31.8.1.1.15 | ColumnipTunnelIfMTUDiscovery | read-write | mandatory | Path MTU discovery. 1 - Enable Path MTU discovery. 2 - Disable Path MTU discovery. |
| 1.3.6.1.4.1.81.31.8.1.1.16 | ColumnipTunnelIfMTU | read-only | mandatory | mandatory GRE Tunnel MTU Value (Bytes) |
| 1.3.6.1.4.1.81.31.8.1.1.17 | ColumnipTunnelIfKeepAliveRetries | read-write | mandatory | The number of times that a device will keep sending keepalive packets without a response before the interface becomes inactive. This item is changeable only wh… |
| 1.3.6.1.4.1.81.31.8.1.1.18 | ColumnipTunnelIfKeepAliveRate | read-write | mandatory | The rate at which the keepalive packets are sent in seconds. I.e. One keepalive packet will be send in ipTunnelIfKeepAliveRate seconds. If ipTunnelIfKeepAliveR… |
| 1.3.6.1.4.1.81.31.9 | NodeipDynamic | |||
| 1.3.6.1.4.1.81.31.9.1 | TableipDynamicTable | not-accessible | mandatory | ipDynamicTable parameters. Used for PPP-IPCP/DHCP connections which gathered dynamic IP addresses. |
| 1.3.6.1.4.1.81.31.9.1.1 | RowipDynamicEntry | not-accessible | mandatory | ipDynamic Entry Parameters. This entry is created when the user activates a row in the ipNegotiated table or in the cigDhcpClientsTable in CIG-CLIENTS for spec… |
| 1.3.6.1.4.1.81.31.9.1.1.1 | ColumnipDynamicIfIndex | read-only | mandatory | A unique value for each interface. |
| 1.3.6.1.4.1.81.31.9.1.1.2 | ColumnipDynamicIfAlias | read-only | mandatory | This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. It is the same as the ifAlias from the standard inte… |
| 1.3.6.1.4.1.81.31.9.1.1.3 | ColumnipDynamicAddrType | read-only | mandatory | This Mib item presents the type of the the ip address whether is ppp ipcp (negotiated) or dhcp. |
| 1.3.6.1.4.1.81.31.9.1.1.4 | ColumnipDynamicIPAddress | read-only | mandatory | The IP address received from remote peer during the PPP-IPCP session or from DHCP server using DHCP client. |
| 1.3.6.1.4.1.81.31.9.1.1.5 | ColumnipDynamicNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.81.31.9.1.1.6 | ColumnipDynamicInterfaceName | read-only | mandatory | The name of the IP dynamic interface. |
| 1.3.6.1.4.1.81.31.9.1.1.7 | ColumnipDynamicOperStatus | read-only | mandatory | The operational status of this IP dynamic interface. up - the interface is active. down - the interface is inactive. |
| 1.3.6.1.4.1.81.31.9.1.1.8 | ColumnipDynamicIcmpRedirects | read-write | mandatory | enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - dis… |
| 1.3.6.1.4.1.81.31.10 | NodeipNegotiated | |||
| 1.3.6.1.4.1.81.31.10.1 | TableipNegotiatedTable | not-accessible | mandatory | ipNegotiatedTable parameters. Used for PPP-IPCP connections which gathered dynamic IP addresses. |
| 1.3.6.1.4.1.81.31.10.1.1 | RowipNegotiatedEntry | not-accessible | mandatory | ipNegotiated Entry Parameters. |
| 1.3.6.1.4.1.81.31.10.1.1.1 | ColumnipNegotiatedIfIndex | read-only | mandatory | A unique value for each interface. |
| 1.3.6.1.4.1.81.31.10.1.1.2 | ColumnipNegotiatedRowStatus | read-write | mandatory | For adding and deleting IP Negotiated PPP-IPCP interfaces. For configuring only Negotiated parameters use create and wait for specific interface. When activati… |
| 1.3.6.1.4.1.81.31.10.1.1.3 | ColumnipNegotiatedIfAlias | read-only | mandatory | This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. It is the same as the ifAlias from the standard inte… |
| 1.3.6.1.4.1.81.31.10.1.1.4 | ColumnipNegotiatedIPAddress | read-only | mandatory | The IP address received from remote peer during the PPP-IPCP session. |
| 1.3.6.1.4.1.81.31.11 | NodeipNAT | |||
| 1.3.6.1.4.1.81.31.11.1 | TableipNATPoolListTable | not-accessible | mandatory | NAT pool list Table. |
| 1.3.6.1.4.1.81.31.11.1.1 | RowipNATPoolListEntry | not-accessible | mandatory | NAT pool list parameters. |
| 1.3.6.1.4.1.81.31.11.1.1.1 | ColumnipNATPoolListIndex | read-only | mandatory | NAT Pool List Index. |
| 1.3.6.1.4.1.81.31.11.1.1.2 | ColumnipNATPoolListName | read-write | mandatory | NAT Pool list name. |
| 1.3.6.1.4.1.81.31.11.1.1.3 | ColumnipNATPoolListRowStatus | read-write | mandatory | Used for creation/deletion of a list and for monitoring list status. Use createAndGo (4) to create a list. Destroy (6) to destroy a list. active(1), notInServi… |
| 1.3.6.1.4.1.81.31.11.2 | TableipNATPoolTable | not-accessible | mandatory | NAT Pool entry parameters. |
| 1.3.6.1.4.1.81.31.11.2.1 | RowipNATPoolEntry | not-accessible | mandatory | NAT Pool parameters. |
| 1.3.6.1.4.1.81.31.11.2.1.1 | ColumnipNATPoolIndex | read-only | mandatory | NAT Pool index in the NAT Pool list. |
| 1.3.6.1.4.1.81.31.11.2.1.2 | ColumnipNATPoolIPAddress | read-write | mandatory | NAT Pool Source IP Address to be NAT'ed. |
| 1.3.6.1.4.1.81.31.11.2.1.3 | ColumnipNATPoolIPMask | read-write | mandatory | NAT Pool Source IP Network Mask to be NAT'ed. |
| 1.3.6.1.4.1.81.31.11.2.1.4 | ColumnipNATPoolMapIPAddress | read-write | mandatory | NAT Pool Mapping to IP Address. |
| 1.3.6.1.4.1.81.31.11.2.1.5 | ColumnipNATPoolMapIPMask | read-write | mandatory | NAT Pool Mapping to Network Mask. |
| 1.3.6.1.4.1.81.31.11.2.1.6 | ColumnipNATPoolRowStatus | read-write | mandatory | Used for creation/deletion of a NAT pool entry and for monitoring entry status. active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), dest… |