CTATM-CONFIG-MIB
93 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.10.1.1 | NodectATMBaseConfig | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.1.1 | ScalarctATMPvcIfDef | read-write | deprecated | This object is the MIB-II interface on which the next Permanent Virtual Circuit (PVC) will be created. It is an error to set an interface number which is not a… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.2 | ScalarctATMLecIfDef | read-write | obsolete | This object is the physical interface on which _all_ LAN Emulation Clients (LECs) will be created. It is an error to set an interface number which does not sup… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.3 | TablectATMDefApplicationTable | not-accessible | obsolete | A list of Default Application objects for this interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.3.1 | RowctATMDefApplicationEntry | not-accessible | obsolete | An entry containing objects pertaining to the default application on a physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.3.1.1 | ColumnctATMDefApplicationIfIndex | read-only | obsolete | Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.3.1.2 | ColumnctATMDefApplication | read-write | obsolete | The default application to be run on this physical ATM interface. Selecting lane04 will cause the application known as FORE LAN Emulation 0.4 to be the default… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.4 | TablectATMFramerStatusTable | not-accessible | obsolete | A list of framer status objects for this interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.4.1 | RowctATMFramerStatusEntry | not-accessible | obsolete | An entry containing objects pertaining to status of the framer on a physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.4.1.1 | ColumnctATMFramerStatusIfIndex | read-only | obsolete | Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.4.1.2 | ColumnctATMFramerStatus | read-write | obsolete | Setting this object to on will activate the Framer MIBs as specified by either RFC-1595 or RFC-1407 depending on whether the interface uses SONET framing or DS… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5 | TablectATMLecArpMacTable | not-accessible | current | A list of LEC-Index, MAC-address, associated with a particular VPI, VCI and ATM-address objects on this device. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5.1 | RowctATMLecArpMacEntry | not-accessible | current | An entry containing objects pertaining to LEC Index, MAC-address, associated with a particular VPI, VCI and and ATM-address on this device. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.1 | ColumnctATMLecArpMacLecIndex | read-only | obsolete | The lecIndex of the LEC which has learned the MAC-address given by ctATMLecArpMacAddress. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.2 | ColumnctATMLecArpMacAddress | read-only | obsolete | The MAC-address which is learned by this LEC. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.3 | ColumnctATMLecArpMacElanName | read-only | current | The name of the ELAN which is joined by this LEC. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.4 | ColumnctATMLecArpMacVpi | read-only | current | The data-direct VPI over which traffic destined for the MAC-address ctATMLecArpMacAddress is sent. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.5 | ColumnctATMLecArpMacVci | read-only | current | The data-direct VCI over which traffic destined for the MAC-address ctATMLecArpMacAddress is sent. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.5.1.6 | ColumnctATMLecArpMacATMAddress | read-only | current | The ATM-address of the destination end-station which is the logical destination of the MAC-address ctATMLecArpMacAddress. The ATM address is returned in a form… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6 | TablectATMPvcBwAllocTable | not-accessible | current | A list of PvcBwAllocEntries for this physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1 | RowctATMPvcBwAllocEntry | not-accessible | current | An entry containing objects pertaining to Bandwidth Allocation. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.1 | ColumnctATMPvcBwAllocPhysIface | read-only | obsolete | Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2 | ColumnctATMPvcBwAllocStatus | read-write | current | The values on and off can be written to this object. Selecting on will enable bandwidth allocation mode on this interface. When this mode is enabled all LECs a… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.3 | ColumnctATMPvcBwAllocBandwidth | read-only | obsolete | Returns the amount of bandwidth in use on this ATM interface in bits per second. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.7 | TablectATMDiscoveryElanTable | not-accessible | current | A list of DiscoveryElanEntries for this physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.7.1 | RowctATMDiscoveryElanEntry | not-accessible | current | An entry containing objects pertaining to discovering elans. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.1 | ColumnctATMDiscoveryElanIndex | read-only | current | There are a fixed number of elans (1 - MAX_ELANS) per physical interface to initiate the discovery process on. This is the index for these elans. This is NOT r… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.2 | ColumnctATMDiscoveryElanName | read-write | current | The device will try to discover, on this named elan, any other devices out in the atm cloud that it should set up an svc with. This allows flexibility in the n… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.3 | ColumnctATMDiscoveryElanMode | read-write | current | Master indicates other elans may discover this elan whereas slave elans may only discover other elans. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.4 | ColumnctATMDiscoveryElanStatus | read-write | current | Enabled indicates this elan should be used in the discovery process whereas disabled elans are not. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.7.1.5 | ColumnctATMDiscoveryElanPhysIface | read-only | obsolete | The physical interface number on which to initiate the discovery processes. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8 | TablectATMVclTable | not-accessible | current | A list of physical interface number, VPI, VCI, associated with a virtual ifIndex, application port, ATM Address, and Encapsulation type on this device. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1 | RowctATMVclEntry | not-accessible | current | An entry containing objects pertaining to physical interface number, VPI, VCI, associated with a particular virtual ifIndex, application port, ATM Address, and… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.1 | ColumnctATMVclIfIndex | read-only | obsolete | Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.2 | ColumnctATMVclVpi | read-only | obsolete | The VPI value of the VCL. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.3 | ColumnctATMVclVci | read-only | obsolete | The VCI value of the VCL. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.4 | ColumnctATMVclVirtualIfIndex | read-only | current | Returns an index for the virtual interface to which the information in this table pertains. It is equal to the MIB-II ifIndex. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.5 | ColumnctATMVclApplicationPort | read-only | current | Returns an index for the application port to which the information in this table pertains. |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.6 | ColumnctATMVclATMAddress | read-only | current | The ATM-address of the channel entry defined by ctATMVclEntry. The ATM address is returned in a form suitable for printing. The format (separators etc.) is imp… |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.8.1.7 | ColumnctATMVclEncapsulationType | read-only | current | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the… |
| 1.3.6.1.4.1.52.4.1.2.10.1.2 | NodectATMPhysicalRedundancy | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1 | NodectATMPhysicalRedundancyInterface | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1 | TablectATMPhyRedundTable | not-accessible | current | A list of redundancy objects for this physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1 | RowctATMPhyRedundEntry | not-accessible | current | An entry containing objects pertaining to ATM physical redundancy for a physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.1 | ColumnctATMPhyRedundIfIndex | read-only | obsolete | Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II ifIndex. |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.2 | ColumnctATMPhyRedundPrimaryPort | read-write | current | The physical port number to be used as the primary port. The primary port is the default port to become active and the port of priority, i.e. regardless of the… |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.3 | ColumnctATMPhyRedundActivePort | read-write | current | The physical port number to be used as the active port. The primary port defaults as the active port if this object is not set. Rules: - This object can always… |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.4 | ColumnctATMPhyRedundStatus | read-write | current | If this object is set to enable, then redundancy for this interface is enabled. If this object is set to disable, redundancy is disabled. If redundancy is disa… |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5 | ColumnctATMPhyRedundActivation | read-write | current | If this object is set to automatic, a backup port will automatically be activated upon failure of the active port. If this object is set to manual, it will req… |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.6 | ColumnctATMPhyRedundPrimaryRevert | read-write | current | If this object is set to automatic, the primary port will automatically be activated upon identifying it to be valid at any time. If this object is set to manu… |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.7 | ColumnctATMPhyRedundPerformTest | read-write | current | If this object is set to enable, then the automatic test (at the time given by ctATMPhyRedundTestTOD) is enabled. The test is periodic with a period of 24 hour… |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.8 | ColumnctATMPhyRedundTestTOD | read-write | current | Setting this object will set the time of day at which each redundant port of this interface will be tested for validity. The value is a null terminated string … |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.9 | ColumnctATMPhyRedundTestResult | read-only | current | This object returns the status of the last test performed on all the ports. If the test was performed as a result of ctATMPhyRedundPerformTest.immediate, then … |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10 | ColumnctATMPhyRedundReset | read-write | current | If this object is set to reset, the state of redundancy on this interface will be reset to factory defaults. When read this object will always return 1. |
| 1.3.6.1.4.1.52.4.1.2.10.1.3 | NodectATMIlmi | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1 | TablectATMIlmiTable | not-accessible | current | A list of ILMI objects for this physical ATM interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1 | RowctATMIlmiEntry | not-accessible | current | An entry containing objects pertaining to ILMI for this physical ATM interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.1 | ColumnctATMIlmiIfIndex | read-only | obsolete | Returns an index for the physical interface to which the information in this table pertains. It is equal to the MIB-II interface number for this interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2 | ColumnctATMIlmiStatus | read-write | current | If this object is set to enableAutoConfigure, then ILMI on this interface will attempt to automatically configure the version of UNI to use on this interface. … |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3 | ColumnctATMIlmiAtmAddress | read-write | current | This object is used as the ATM address of this interface if ILMI on this interface is disabled i.e, the value of IlmiStatus is set to disable. If ILMI address … |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.4 | ColumnctATMIlmiState | read-only | current | This object describes the current state of ILMI on this interface. The meaning of the various values returned is as follows: unknown -ILMI is in the process of… |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.5 | ColumnctATMIlmiRestart | read-write | current | Setting this object to restart will restart ILMI on this interface. Reading this object always returns a 1. |
| 1.3.6.1.4.1.52.4.1.2.10.1.4 | NodectATMSignalConfig | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1 | TablectATMSignalTable | not-accessible | current | A list of signaling object for this interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1 | RowctATMSignalEntry | not-accessible | current | An entry containing objects pertaining to ATM signaling on a physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.1 | ColumnctATMSignalIfIndex | read-only | obsolete | Returns an index for the physical interface to which the information in this table pertains. It is equal to ifIndex. |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.2 | ColumnctATMSignalStatus | read-write | current | If this object is set to enable, the signalling for this interface is enabled. If this object is set to disable, signalling is disabled. When read, this object… |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.3 | ColumnctATMSignalType | read-write | current | The type of signalling to be used on this interface. Setting this object to spans will cause the FORE SPANS protocol to be used for signalling on this interfac… |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.4 | ColumnctATMSignalQ93Status | read-only | current | If ctATMSignalType is other than spans, then the value of this object is the state of the layer 3 signalling stack on this interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.5 | ColumnctATMSignalQsaalStatus | read-only | current | If ctATMSignalType is other than spans, then the value of this object is the state of the layer-2 signalling stack (Q.SAAL) on this interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6 | ColumnctATMSignalRestart | read-write | current | Setting this object to restart will restart signalling on this interface. Reading this object always returns a 1. |
| 1.3.6.1.4.1.52.4.1.2.10.1.5 | NodectATMLANEServices | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.6 | NodectATMLANEInfoExtGroup | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1 | TablectATMLANEInfoExtStatusTable | not-accessible | current | Defines extentions to the lecConfigTable and the lecStatusTable in the ATM Forum's LANE MIB. |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1.1 | RowctATMLANEInfoExtStatusEntry | not-accessible | current | An entry containing objects describing information about an LEC (LAN Emulation Client). It is instanced by lecIndex which is the same as what is defined in the… |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.1 | ColumnctATMLANEInfoExtStatusUpTime | read-only | current | The amount of time in milliseconds since the LEC has reached the operational state. It will read 0 if the LEC is not operational. |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.2 | ColumnctATMLANEInfoExtStatus | read-only | current | LEC_active - The LEC is actually trying to become or is operational. See lecInterfaceState in the ATM Forum's LAN Emulation MIB to see which state the LEC is i… |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.3 | ColumnctATMLANEInfoExtStatusSendTopo | read-write | current | This configuration value is used to define whether or not this LEC should send a LE_TOPOLOGY_CHANGE message when the situation presents itself. |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.4 | ColumnctATMLANEInfoExtStatusTimeLeft | read-only | current | A string used to describe the amount of time left in a certain LEC state before the LEC will try again in that state. This will read NULL if the LEC is operati… |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.5 | ColumnctATMLANEInfoExtStatusNumQueues | read-write | current | This configuration value is used to define the number of traffic descriptors used by this LEC to implement Traffic Mangement. It's value ranges from 1 to ctATM… |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.1.1.6 | ColumnctATMLANEInfoExtStatusMaxNumQueues | read-only | current | Defines the maximum number that ctATMLANEInfoExtNumQueues can be set to. |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.2 | TablectATMLANEInfoExtTMTable | not-accessible | current | Defines a list, of length ctATMLANEInfoExtStatusNumQueues, of traffic descriptor indexes matching atmTrafficDescrParamIndex in the atmTrafficDescrParamTable de… |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.2.1 | RowctATMLANEInfoExtTMEntry | not-accessible | current | An entry containing OBJECTS describing information about an LEC's (LAN Emulation Client) Traffic Management parameters. It is instanced by lecIndex, which is t… |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.2.1.1 | ColumnctATMLANEInfoExtTMIndex | read-only | current | Defines the list index and will range from 1 to ctATMLANEInfoExtStatusNumQueues. |
| 1.3.6.1.4.1.52.4.1.2.10.1.6.2.1.2 | ColumnctATMLANEInfoExtTMTrafficDescrIndex | read-write | current | Defines a traffic descriptor index that matches the index atmTrafficDescrParamIndex in the atmTrafficDescrParamTable defined in the RFC 1695. NOTE: This table … |
| 1.3.6.1.4.1.52.4.1.2.10.1.7 | NodectATMTrafficManagementGroup | |||
| 1.3.6.1.4.1.52.4.1.2.10.1.7.1 | TablectATMTrafficDescrNameTable | not-accessible | current | An association between a string describing a traffic descriptor and a traffic descriptor index into the atmTrafficDescrParamTable in RFC 1695. |
| 1.3.6.1.4.1.52.4.1.2.10.1.7.1.1 | RowctATMTrafficDescrNameEntry | not-accessible | current | An entry containing objects associating a string describing a traffic descriptor on this device and a traffic descriptor index into the atmTrafficDescrParamTab… |
| 1.3.6.1.4.1.52.4.1.2.10.1.7.1.1.1 | ColumnctATMTrafficDescrName | read-write | current | The name of the traffic descriptor. |
| 1.3.6.1.4.1.52.4.1.2.10.1.7.2 | TablectATMTrafficServiceCategoriesSupportedTable | not-accessible | current | A table related to traffic management service categories supported. |
| 1.3.6.1.4.1.52.4.1.2.10.1.7.2.1 | RowctATMTrafficServiceCategoriesSupportedEntry | not-accessible | current | A table entry containing information related to the traffic management service categories that are supported for a certain physical interface. |
| 1.3.6.1.4.1.52.4.1.2.10.1.7.2.1.1 | ColumnctATMTrafficServiceCategoriesSupportedBitMask | read-only | current | This indicates the traffic service categories supported by this physical interface. other(0) Undefined, or service category unknown PVC Bandwidth Allocation(1)… |
| 1.3.6.1.4.1.52.4.1.2.10.1.7.2.1.2 | ColumnctATMTrafficManagementAllocBandwidth | read-only | current | Returns the amount of bandwidth in use on this ATM interface in bits per second. Value only valid when running more than just UBR traffic. |