DLINK-3100-LLDP-MIB
47 objects
This private MIB module adds MIBs to LLDP (Link Layer Discovery Protocol).
Imported Objects
| DIFFSERV-DSCP-TC | Dscp |
| DLINK-3100-DEVICEPARAMS-MIB | rndErrorDesc rndErrorSeverity |
| DLINK-3100-MIB | rnd rndNotifications |
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| LLDP-EXT-MED-MIB | LldpXMedCapabilities |
| LLDP-MIB | LldpManAddress LldpPortList LldpPortNumber lldpRemIndex lldpRemLocalPortNum lldpRemTimeMark |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.94.89.89.0.209 | NotificationrlLldpTLVsTxOverloadingStateEnterTrap | current | Informational trap indicating that the port has entered the overloading state. | |
| 1.3.6.1.4.1.171.10.94.89.89.0.210 | NotificationrlLldpTLVsTxOverloadingStateExitTrap | current | Informational trap indicating that the port is no longer in the overloading state.. | |
| 1.3.6.1.4.1.171.10.94.89.89.110 | IdentityrlLldp | This private MIB module adds MIBs to LLDP (Link Layer Discovery Protocol). | ||
| 1.3.6.1.4.1.171.10.94.89.89.110.1 | NoderlLldpObjects | |||
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1 | NoderlLldpConfig | |||
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.1 | ScalarrlLldpEnabled | read-write | current | Setting this variable to 'true' will globally enable the LLDP feature (both transmit and receive functionalities). Setting this variable to 'false' will global… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.2 | ScalarrlLldpClearRx | read-write | current | A set of ports that are identified by a PortList, in which each port is represented as a bit. Clears the Rx information about the remote agents accordingly to … |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.3 | ScalarrlLldpDuMode | read-write | current | Action with LLDPDU upon globally disabled LLDP. If the associated rlLldpDuMode object has a value of 'filtering(1)', then received frames are containing LLDPDU… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4 | TablerlLldpAutoAdvLocPortManAddrTable | not-accessible | current | This table contains automaticaly selected management address, advertised on the local port. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4.1 | RowrlLldpAutoAdvLocPortManAddrEntry | not-accessible | current | Information about a local port, which advertises the Management address automatically. Entry also included an interface number, on which the Management address… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4.1.1 | ColumnrlLldpAutoAdvLocPortNum | not-accessible | current | The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object i… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4.1.2 | ColumnrlLldpAutoAdvManAddrOwnerIfId | read-write | current | The integer value is used to identify the interface number (port, trunk or vlan). The management address, automatically advertised from associated 'rlLldpAutoA… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4.1.3 | ColumnrlLldpAutoAdvManAddrNone | read-write | current | A value of 'true' indicates that the any management address hasn't advertised by the local port. Moreover, the configuration of automatic management address ad… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4.1.4 | ColumnrlLldpAutoAdvManAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated 'rlLldpAutoAdvManAddr' object. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4.1.5 | ColumnrlLldpAutoAdvManAddr | read-only | current | The string value used to identify the management address is automaticaly advertised by local port, and assigned on the associated 'rlLldpAutoAdvManAddrOwnerIfI… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.1.4.1.6 | ColumnrlLldpAutoAdvPortsStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2 | NoderlLldpXMedConfig | |||
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1 | TablerlLldpXMedLocMediaPolicyContainerTable | not-accessible | current | This table contains one row per policy number of media policy container configuration. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1 | RowrlLldpXMedLocMediaPolicyContainerEntry | not-accessible | current | Configuration of a particular policy in the media policy container. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.1 | ColumnrlLldpXMedLocMediaPolicyContainerIndex | not-accessible | current | The index value used to identify the Media Policy associated with this entry. The value of this object is used as a policy number index to the rlLldpXMedLocMed… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.2 | ColumnrlLldpXMedLocMediaPolicyContainerAppType | read-write | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.3 | ColumnrlLldpXMedLocMediaPolicyContainerVlanID | read-write | current | An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall … |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.4 | ColumnrlLldpXMedLocMediaPolicyContainerPriority | read-write | current | This object contains the value of the 802.1p priority which is associated with the given port on the local system. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.5 | ColumnrlLldpXMedLocMediaPolicyContainerDscp | read-write | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.6 | ColumnrlLldpXMedLocMediaPolicyContainerUnknown | read-write | current | A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority an… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.7 | ColumnrlLldpXMedLocMediaPolicyContainerTagged | read-write | current | A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is us… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.8 | ColumnrlLldpXMedLocMediaPolicyContainerPorts | read-write | current | A set of ports that are identified by a PortList, in which each port is represented as a bit. The local Media Policy Number will be associated with (or attache… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.2.1.1.9 | ColumnrlLldpXMedLocMediaPolicyContainerRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3 | TablerlLldpTLVsTxOverloadingTable | not-accessible | current | A table that show the which of the LLDP TLVs are not transmitted on individual ports due to insufficient room in the frame and the size of each TLV. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3.1 | RowrlLldpTLVsTxOverloadingEntry | not-accessible | current | LLDP TX overloading information that shows the transmission of TLVs on LLDP transmission capable ports. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3.1.1 | ColumnrlLldpTxOverloadingPortNum | not-accessible | current | The value of this object is used as a port index to the TLVs TX overloading Table . |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3.1.2 | ColumnrlLldpTxOverloadingIndex | not-accessible | current | The sequence number of the group into sent LLDP PPDU starting from 1. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3.1.3 | ColumnrlLldpTxOverloadingGroupId | read-only | current | Defines the TLVs groups. A value of mandatory(1) defines LLDP mandatory TLVs group A value of optinal(2) defines LLDP optional TLVs group A value of medCap(3) … |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3.1.4 | ColumnrlLldpTLVsTxSize | read-only | current | The size of the TLV in Bytes. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3.1.5 | ColumnrlLldpTLVsTxGroupOverloading | read-only | current | Boolean Flag, When TRUE indicating that LLDP TLVs were overloaded and the value of left size is negative |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.3.1.6 | ColumnrlLldpTLVsTxLeftSize | read-only | current | The size in Bytes of the available space left in the LLDPDU after adding the TLVs group. In case the Overloading Flag is TRUE, there not enough space in the LL… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.4 | TablerlLldpTLVsTxOverloadingSizeTable | not-accessible | current | A table that show the total size of the all TLVs and the LLDPDU free size . |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.4.1 | RowrlLldpTLVsTxOverloadingSizeEntry | not-accessible | current | LLDP TX overloading information |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.4.1.2 | ColumnrlLldpTotalTLVsTxSize | read-only | current | The Total size of all TLVs group in Bytes. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.4.1.3 | ColumnrlLldpTLVsTxOverloading | read-only | current | Boolean Flag, When TRUE indicating that LLDP TLVs group were overloaded and the value of left size is negative |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.4.1.4 | ColumnrlLldpLeftTLVsTxSize | read-only | current | The size in Bytes of the available space left in the LLDPDU after adding all TLVs group. In case the Overloading Flag is TRUE, there not enough space in the LL… |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.5 | ScalarrlLldpTLVsTxOverloadingPorts | read-only | current | Port list that represent the overloading state of each port |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.8 | TablerlLldpRemTtlTable | not-accessible | current | This table contains the remote device Time To Live LLDP TLV. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.8.1 | RowrlLldpRemTtlEntry | not-accessible | current | LLDP Time To TTL remove TLV. This uses the key as defind in lldpRemTable of the LLDP-MIB. |
| 1.3.6.1.4.1.171.10.94.89.89.110.1.8.1.1 | ColumnrlLldpRemTtl | read-only | current | This object contains the remote device Time To Live LLDP TLV. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PolicyContainerAppType | INTEGER { unknown(0), voice(1), voiceSignaling(2), guestVoice(3), guestVoiceSignaling(4), softPhoneVoice(5), videoconferencing(6), streamingVideo(7), videoSignaling(8) } | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. A value of voice(1) indicates that the media type defining a primary function of the application for the poli… |
| PolicyNumber | Integer32(1..32768) | current | Policy Number in the Media Policy Container. Policy numbers should be in the range of 1 and 32768 since 8 policies can be configured for each particular port and the number of ports range is 1 to 4096. |