DOCS-IF-M-CMTS-MIB
158 objects
This MIB module contains the management objects for the configuration and management of the External PHY interface (DEPI) of the M-CMTS architecture (Modular CMTS).
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.6 | IdentitydocsIfMCmtsMib | This MIB module contains the management objects for the configuration and management of the External PHY interface (DEPI) of the M-CMTS architecture (Modular C… | ||
| 1.3.6.1.4.1.4491.2.1.6.0 | NodedocsIfMCmtsNotifications | |||
| 1.3.6.1.4.1.4491.2.1.6.1 | NodedocsIfMCmtsObjects | |||
| 1.3.6.1.4.1.4491.2.1.6.1.1 | NodedocsIfMCmtsBaseObjects | |||
| 1.3.6.1.4.1.4491.2.1.6.1.1.1 | IdentitydocsIfMCmtsBaseAdmin | current | Registration point for M-CMTS characterization of PHY parameters dependencies. | |
| 1.3.6.1.4.1.4491.2.1.6.1.1.1.1 | IdentitydocsPHYParamFixValue | current | Indicates that this PHY parameter is fix and cannot be changed. | |
| 1.3.6.1.4.1.4491.2.1.6.1.1.1.2 | IdentitydocsPHYParamSameValue | current | Indicates that the PHY parameter value is the same for the elements in a dependency group; thus, a change in the PHY parameter of an element in the group will … | |
| 1.3.6.1.4.1.4491.2.1.6.1.1.1.3 | IdentitydocsPHYParamAdjacentValues | current | Indicates that the PHY parameter has an adjacency or sequence pattern for the elements in a dependency group e.g., A group of channels all using J.83 Annex A, … | |
| 1.3.6.1.4.1.4491.2.1.6.1.1.1.4 | IdentitydocsPHYParamFrequencyRange | current | This object indicates that the frequency in a group ID is constrained to a frequency range. Vendors may extend the MIB construct containing this reference to d… | |
| 1.3.6.1.4.1.4491.2.1.6.1.2 | NodedocsIfMCmtsCoreObjects | |||
| 1.3.6.1.4.1.4491.2.1.6.1.2.1 | TabledocsIfMCmtsCoreDownstreamTable | not-accessible | current | M-CMTS Core extensions for the DOCSIS RFI Downstream docsIfDownstreamTable. |
| 1.3.6.1.4.1.4491.2.1.6.1.2.1.1 | RowdocsIfMCmtsCoreDownstreamEntry | not-accessible | current | A conceptual row for this table. There is a corresponding entry for each entry of docsIfDownstreamChannelTable. |
| 1.3.6.1.4.1.4491.2.1.6.1.2.1.1.1 | ColumndocsIfMCmtsCoreDownstreamType | read-only | current | The value 'integrated' means the Downstream Interface is integrated to the DOCSIS MAC interface. This type corresponds to the legacy DOCSIS Downstream Interfac… |
| 1.3.6.1.4.1.4491.2.1.6.1.2.1.1.2 | ColumndocsIfMCmtsCoreDownstreamPhyDependencies | read-only | current | The PHY parameters being flagged in the DEPI session as DEPI TSID group dependencies. A value of all bits on zero indicates no TSID group dependencies for PHY … |
| 1.3.6.1.4.1.4491.2.1.6.1.3 | NodedocsIfMCmtsEqamObjects | |||
| 1.3.6.1.4.1.4491.2.1.6.1.3.1 | TabledocsIfMCmtsEqamDownstreamTable | not-accessible | current | M-CMTS EQAM extensions for the DOCSIS RFI Downstream docsIfDownstreamTable. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1 | RowdocsIfMCmtsEqamDownstreamEntry | not-accessible | current | A conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.1 | ColumndocsIfMCmtsEqamDownstreamTSID | read-write | current | Represents the TSID value for the QAM channel of this M-CMTS Downstream Interface. The value '0' indicates no TSID is being configured in the EQAM device for t… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.2 | ColumndocsIfMCmtsEqamDownstreamPhyDependencies | read-only | current | The summary of the M-CMTS Downstream Interface dependencies based on the constraints of docsIfMCmtsEqamGroupDependencyEntry. A BIT position set to '1' indicate… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.3 | ColumndocsIfMCmtsEqamDownstreamDevicePhyParamLock | read-only | current | Indicates if by design the QAM Channel is directly configurable. This BIT set is derived from the dependency group a QAM channel belongs where docsIfMCmtsEqamG… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.4 | ColumndocsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock | read-write | current | Administrative configuration of lock bits for EQAM channels PHY parameters. A BIT set of this object is meaningful when the same BIT set in docsIfMCmtsEqamDown… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.5 | ColumndocsIfMCmtsEqamDownstreamAllocationType | read-write | current | Indicates the mechanisms authorized to reserve and control this M-CMTS Downstream interface. When configured to 'docsisOnly' indicates that it can be allocated… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.6 | ColumndocsIfMCmtsEqamDownstreamAllocationStatus | read-only | current | Indicates the service(s) the M-CMTS Downstream Interface is allocated for. 'other' BIT set to '1' indicates the resource is currently allocated to DOCSIS and/o… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7 | ColumndocsIfMCmtsEqamDownstreamAllocationTimeout | read-write | current | Indicates the number of seconds the EQAM device waits before advertising the QAM channel resource is idle and/or accepting a session establishment from a diffe… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8 | ColumndocsIfMCmtsEqamDownstreamDRRPAdvertizing | read-write | current | Indicates when a QAM channel resource should be advertised via DRRP (DOCSIS Resource Registration Protocol) to an Edge Resource Manager (ERM). This Object is u… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.1.1.9 | ColumndocsIfMCmtsEqamDownstreamUdpPortMapping | read-only | current | The UDP Port within a L2TPv3 Session PDU the EQAM uses to map DEPI flows to the EQAM channels associated to this table entry. When the EQAM device does not sup… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2 | TabledocsIfMCmtsEqamDownstreamCapabilitiesTable | not-accessible | current | This table contains the QAM channel capabilities for the M-CMTS Downstream Interface PHY parameters in the EQAM device. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1 | RowdocsIfMCmtsEqamDownstreamCapabilitiesEntry | not-accessible | current | A conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.1 | ColumndocsIfMCmtsEqamDownstreamCapabFrequency | read-only | current | The QAM channel frequency capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel frequency value has dependencies with other QAM channels and … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.2 | ColumndocsIfMCmtsEqamDownstreamCapabBandwidth | read-only | current | The QAM channel Bandwidth capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel bandwidth value has dependencies with other QAM channels as i… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.3 | ColumndocsIfMCmtsEqamDownstreamCapabPower | read-only | current | The QAM channel Power capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel power value has dependencies with other QAM channels as indicated… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.4 | ColumndocsIfMCmtsEqamDownstreamCapabModulation | read-only | current | The QAM channel Modulation capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel modulation value has dependencies with other QAM channels as… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.5 | ColumndocsIfMCmtsEqamDownstreamCapabInterleaver | read-only | current | The QAM channel Interleaver capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel interleave value has dependencies with other QAM channels a… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.6 | ColumndocsIfMCmtsEqamDownstreamCapabJ83Annex | read-only | current | The QAM channel J.83 Annex Capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel J.83 Annex value has dependencies with other QAM channels as… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.7 | ColumndocsIfMCmtsEqamDownstreamCapabConcurrentServices | read-only | current | The QAM channel Concurrent Services Capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel is part of a dependency group that supports concurr… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.8 | ColumndocsIfMCmtsEqamDownstreamCapabServicesTransport | read-only | current | The QAM channel Services transports modes Capabilities. 'eqamDependency' BIT set to '1' indicates the QAM channel Service transport type has dependencies with … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.2.1.9 | ColumndocsIfMCmtsEqamDownstreamCapabMuting | read-only | current | The QAM channel muting capabilities. 'eqamDependency' BIT set to '1' indicates the EQAM Mute state has dependencies with other QAM channels as indicated in doc… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.3 | TabledocsIfMCmtsEqamGroupDependencyTable | not-accessible | current | This table describes the rules that identify groups of QAM channels with PHY parameters dependencies. A PHY parameter dependency group means that a set to a QA… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.3.1 | RowdocsIfMCmtsEqamGroupDependencyEntry | not-accessible | current | A conceptual row of this table. QAM channels are modeled as PhysicalClass 'port' from the ENTITY-MIB. An QAM channel can be represented as part of an entity MI… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.3.1.1 | ColumndocsIfMCmtsEqamGroupDependencyPhyParam | not-accessible | current | This object represents the type of DOCSIS PHY parameter that may have dependencies when setting an individual object in the dependency group. The value 'all' m… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.3.1.2 | ColumndocsIfMCmtsEqamGroupDependencyPhysicalIndex | not-accessible | current | Indicates the physical element from where the PHY parameter dependency for QAM channels applies. All the QAM channels elements under this Physical index will b… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.3.1.3 | ColumndocsIfMCmtsEqamGroupDependencyGroupID | read-only | current | The internal ID assigned for the QAM channels in the dependency group. The value of this object is unique in the scope of the PHY parameter being mapped. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.3.1.4 | ColumndocsIfMCmtsEqamGroupDependencyType | read-only | current | The description of the type of dependency associated with this dependency group. Basic type of dependencies are docsPHYParamSameValue, docsPHYParamAdjacentValu… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4 | TabledocsIfMCmtsEqamGlobCfgDownTable | not-accessible | current | A Table for setting multiple parameters of multiple QAM channels. Creating an entry in this table will set automatically all QAM Channels in the containment tr… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1 | RowdocsIfMCmtsEqamGlobCfgDownEntry | not-accessible | current | The index of this table. Entries in this table persist after system re-initalization. It is common to have 'holes' in this table since not all the parameters a… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.1 | ColumndocsIfMCmtsEqamGlobCfgDownIndex | not-accessible | current | The unique identifier of entries in this table. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.2 | ColumndocsIfMCmtsEqamGlobCfgDownPhysicalIndex | read-create | current | The ENTITY-MIB Physical Index that includes the QAM channels associated to the global parameter being set. The QAM Channels covered by this global set are thos… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.3 | ColumndocsIfMCmtsEqamGlobCfgDownBandwidth | read-create | current | The object for global configuration of Downstream channel bandwidth of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex. A s… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.4 | ColumndocsIfMCmtsEqamGlobCfgDownPower | read-create | current | The object for global configuration of Downstream channel Power Level of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex. A… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.5 | ColumndocsIfMCmtsEqamGlobCfgDownModulation | read-create | current | The object for global configuration of Downstream channel modulation of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex. A … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.6 | ColumndocsIfMCmtsEqamGlobCfgDownInterleave | read-create | current | The object for global configuration of Downstream channel interleave of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex. A … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.7 | ColumndocsIfMCmtsEqamGlogCfgDownAnnex | read-create | current | The object for global configuration of Downstream channel J.83 Annex of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalIndex. A … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.8 | ColumndocsIfMCmtsEqamGlobCfgDownSymbolRateM | read-create | current | The object for global configuration of Downstream channel Symbol M factor of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalInde… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.9 | ColumndocsIfMCmtsEqamGlobCfgDownSymbolRateN | read-create | current | The object for global configuration of Downstream channel Symbol M factor of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCfgDownPhysicalInde… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.10 | ColumndocsIfMCmtsEqamGlobCfgDownLockParams | read-create | current | The object for global configuration of Downstream channel lock state of the PHY parameters of the QAM channels in the containment tree of docsIfMCmtsEqamGlobCf… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.12 | ColumndocsIfMCmtsEqamGlobCfgDownExecutionCode | read-only | current | Indicates the status of the global configuration entry execution. If different than 'none', represents the last error condition present. 'complete' indicates t… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.13 | ColumndocsIfMCmtsEqamGlobCfgDownErrorsCount | read-only | current | The number of error cases where a QAM channel was not successfully set. This value starts counting at zero any time the global configuration entry is executed.… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.4.1.14 | ColumndocsIfMCmtsEqamGlobCfgDownRowStatus | read-create | current | The status of this conceptual table row entry. In order to create an entry the object docsIfMCmtsEqamGlobCfgDownPhysicalIndex MUST be set This table has 'holes… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5 | TabledocsIfMCmtsChannelBlockTable | not-accessible | current | This table configure attributes of block channels and Controls channel Block Tests. A channel block is an ENTITY-MIB containment of PhysicalClass 'module' that… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1 | RowdocsIfMCmtsChannelBlockEntry | not-accessible | current | The conceptual row entry of this table Entries in this table are created at system Initialization for Block Channels compliant to DRFI Specification. Sets in e… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.1 | ColumndocsIfMCmtsChannelBlockPhysicalIndex | not-accessible | current | The Physical Index of the QAM Channel Block. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.2 | ColumndocsIfMCmtsChannelBlockNumberChannels | read-only | current | The Number of QAM Channels N associated to this entry. |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.3 | ColumndocsIfMCmtsChannelBlockCfgNumberChannels | read-write | current | The Number of QAM Channels N' to configure for the QAM block. The maximum number of channels per block follows the consideration of maximum number of digital c… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.4 | ColumndocsIfMCmtsChannelBlockMute | read-write | current | The Mute control object for the Block Channel A set to this object to 'true' is reflected in ifOperStatus set to 'down' of the QAM channels associated to the b… |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.5 | ColumndocsIfMCmtsChannelBlockTestType | read-only | current | A set of in-service and out-of-service test modes. The value 'noTest'(1) is the normal condition after reinitialization where the QAM channels are expected in … |
| 1.3.6.1.4.1.4491.2.1.6.1.3.5.1.6 | ColumndocsIfMCmtsChannelBlockTestIfIndex | read-write | current | The ifIndex of the QAM channel to perform the QAM channel test. A Set to a value that does not correspond to a QAM Channel within the Block channel returns err… |
| 1.3.6.1.4.1.4491.2.1.6.1.4 | NodedocsIfMCmtsDepiObjects | |||
| 1.3.6.1.4.1.4491.2.1.6.1.4.1 | NodedocsIfMCmtsDepiSessionObjects | |||
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1 | TabledocsIfMCmtsDepiSessionConfigTable | not-accessible | current | The Control table for the configuration of M-CMTS Downstream Interfaces. The M-CMTS Downstream Interface configuration information is contained in this table. … |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1 | RowdocsIfMCmtsDepiSessionConfigEntry | not-accessible | current | A conceptual row for this table. Entries are created by either management operations or other M-CMTS applications or interfaces (e.g., ERMI), the persistence o… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.1 | ColumndocsIfMCmtsDepiSessionConfigIndex | not-accessible | current | The index for entries in this conceptual table. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.2 | ColumndocsIfMCmtsDepiSessionConfigCableMacIfIndex | read-create | current | Defines the MAC domain (ifType docsCableMaclayer)on which the DEPI Session is being set for an existing M-CMTS Downstream interface. This object MUST be set to… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.3 | ColumndocsIfMCmtsDepiSessionConfigCableMCmtsDownIfIndex | read-create | current | Defines the Downstream channel index on which the DEPI Session is being set. The set of this object is optional. When this object is not specified the M-CMTS i… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.4 | ColumndocsIfMCmtsDepiSessionConfigAddrType | read-create | current | The type of InetAddress for docsIfMCmtsDepiSessionConfigLocalAddr and docsIfMCmtsDepiSessionConfigRemoteAddr. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.5 | ColumndocsIfMCmtsDepiSessionConfigLocalAddr | read-create | current | The InetAddress of the local entity the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.6 | ColumndocsIfMCmtsDepiSessionConfigRemoteAddr | read-create | current | The InetAddress of the remote peer the DEPI Session is set. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.7 | ColumndocsIfMCmtsDepiSessionConfigL2TPv3HeaderType | read-create | current | Indicates the type of L2TPv3 header being configured for the DEPI session. The value 'ip' means L2TPv3 Header Over IP The value 'udp' means L2TPv3 Header Over … |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.8 | ColumndocsIfMCmtsDepiSessionConfigMethod | read-create | current | Indicates the DEPI Tunnel mechanism used for the DEPI session. Currently only 'l2tpControl is supported. The value 'other' is used to indicate other means. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.9 | ColumndocsIfMCmtsDepiSessionConfigTSID | read-create | current | The TSID to be associated to the DEPI Session. TSID is a 16-bit unsigned integer value configured per QAM channel in the EQAM device and serves as a QAM channe… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.10 | ColumndocsIfMCmtsDepiSessionConfigDEPIMode | read-create | current | The DEPI mode of operation of this entry 'dmpt' indicates DOCSIS MPT mode (D-MPT) 'psp' indicates Packet Streaming Protocol. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.11 | ColumndocsIfMCmtsDepiSessionConfigRsrcAllocReq | read-create | current | A reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable used in the DEPI Session setup by the M-CMTS Core to configure EQAM PHBIDs. M-CMT… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.12 | ColumndocsIfMCmtsDepiSessionConfigCinPhbIdPolicy | read-create | current | A list of tags to reference CIN PHB policies in docsIfMCmtsDepiPhbPolicyTable for this DEPI session. This object is not meaningful for the EQAM, and reports a … |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.13 | ColumndocsIfMCmtsDepiSessionConfigSyncEnabled | read-create | current | Indicates the DOCSIS Sync message handling at the Edge QAM based upon PSP or DMPT mode of operation. In MPT mode 'true' indicates the EQAM MUST perform Sync Ti… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.14 | ColumndocsIfMCmtsDepiSessionConfigSyncInterval | read-create | current | Indicates the time nominal time interval for EQAM to insert DOCSIS Sync messages when operating in PSP mode. In DMPT mode this value is ignored. The unit refer… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.15 | ColumndocsIfMCmtsDepiSessionConfigPhyParamsFlag | read-create | current | When configuring an entry, DOCSIS PHY parameters may be set directly or default values are used to populate the entry. This object indicates which PHY paramete… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.16 | ColumndocsIfMCmtsDepiSessionConfigChannelFrequency | read-create | current | The channel frequency for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfChannelFrequen… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.17 | ColumndocsIfMCmtsDepiSessionConfigChannelModulation | read-create | current | The channel modulation for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChannelMo… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.18 | ColumndocsIfMCmtsDepiSessionConfigChannelInterleave | read-create | current | The channel Interleaver for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChannelI… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.19 | ColumndocsIfMCmtsDepiSessionConfigChannelPower | read-create | current | The channel power level for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChannelP… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.20 | ColumndocsIfMCmtsDepiSessionConfigChannelAnnex | read-create | current | The channel J.83 Annex type for the Downstream DEPI Session. A DEPI Session establishment success will update the corresponding ifIndex entry of docsIfDownChan… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.21 | ColumndocsIfMCmtsDepiSessionConfigChannelSymbolRateM | read-create | current | The value M for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.22 | ColumndocsIfMCmtsDepiSessionConfigChannelSymbolRateN | read-create | current | The value N for the estimation of the DS Symbol Rate as (10.24 MHz )*M/N |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.23 | ColumndocsIfMCmtsDepiSessionConfigChannelOutputRate | read-create | current | The percentage of the maximum output rate for the aggregated traffic that is being sent though this M-CMTS Downstream interface to the QAM channel associated w… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.24 | ColumndocsIfMCmtsDepiSessionConfigChannelBurstSize | read-create | current | The maximum burst size for the aggregate output rate of this M-CMTS Downstream Interface. The default value of this object corresponds to 3 M-CMTS Core payload… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.25 | ColumndocsIfMCmtsDepiSessionConfigStorage | read-create | current | The storage realization of the entry. No columnar values can be changed if the StorageType of an entry is 'permanent'. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.26 | ColumndocsIfMCmtsDepiSessionConfigRowStatus | read-create | current | The status of this conceptual table row entry. In order to set an entry to the 'active' status, the MIB objects below must be set to proper values: Other objec… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.1.1.27 | ColumndocsIfMCmtsDepiSessionConfigChannelId | read-create | current | The downstream channel identification of this M-CMTS Downstream interface. During entry creation The M-CMTS Core assigns a Channel ID if this object is not pro… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2 | TabledocsIfMCmtsDepiSessionInfoTable | not-accessible | current | This table provides M-CMTS Downstream Interface with DEPI session information related to the DEPI session configuration process. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1 | RowdocsIfMCmtsDepiSessionInfoEntry | not-accessible | current | A conceptual row for this table. Entries in this table are created when a DEPI Session Configuration Table entry becomes active. Both entries are linked throug… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.1 | ColumndocsIfMCmtsDepiSessionInfoCfgIndex | read-only | current | The value of the docsIfMCmtsDepiSessionConfigTable index (docsIfMCmtsDepiSessionConfigIndex) associated to this M-CMTS Downstream Interface Entry. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.2 | ColumndocsIfMCmtsDepiSessionInfoUdpPort | read-only | current | The UDP Port reported by the EQAM when the DEPI session uses the L2TPv3 Header Over UDP. This object reports a value 0 when the DEPI session is running with th… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.3 | ColumndocsIfMCmtsDepiSessionInfoMaxPayload | read-only | current | The maximum MTU negotiated between the M-CMTS Core and the EQAM during the DEPI session establishment process. The local payload MTU is known from the IfEntry … |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.4 | ColumndocsIfMCmtsDepiSessionInfoPathPayload | read-only | current | The maximum MTU traversing the CIN from M-CMTS Core to the EQAM. This calculated by the M-CMTS core by procedures such MTU discovery as described in the DEPI s… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.5 | ColumndocsIfMCmtsDepiSessionInfoIncludeDOCSISMsgs | read-only | current | Reports if the M-CMTS includes DOCSIS MAP messages and other MAC Management messages in the Downstream interface entry associated with this DEPI control entry.… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.6 | ColumndocsIfMCmtsDepiSessionInfoRsrcAllocResp | read-only | current | In the M-CMTS core a reference to docsIfMCmtsDepiRsrcAllocIndex of docsIfMCmtsDepiRsrcAllocTable as reported by the EQAM during the DEPI session establishment … |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.7 | ColumndocsIfMCmtsDepiSessionInfoConnCtrlID | read-only | current | Indicates the DEPI Tunnel Connection Control Identifier For L2TPv3 this corresponds to CCID. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.8 | ColumndocsIfMCmtsDepiSessionInfoEQAMSessionID | read-only | current | Indicates the DEPI Session Identifier associated to the EQAM IP host. In the M-CMTS it corresponds to the L2TPv3 Remote Session ID, while in the EQAM indicates… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.9 | ColumndocsIfMCmtsDepiSessionInfoOwner | read-only | current | The creation method of the entry. Applicable to both M-CMTS Core and EQAM devices. 'management' Indicates the entry was created via a direct configuration mana… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.10 | ColumndocsIfMCmtsDepiSessionInfoState | read-only | current | A high level state of the DEPI session. 'depiSessionUp' Indicates the DEPI session is UP and able to pass traffic. 'depiSessionError' Indicates the DEPI sessio… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.11 | ColumndocsIfMCmtsDepiSessionInfoErrorCode | read-only | current | The error Code raised when docsIfMCmtsDepiSessionInfoState is 'depiSessionError' 'invalidMACInterfaceValue' Indicates wrong assignment of the M-CMTS MAC interf… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.12 | ColumndocsIfMCmtsDepiSessionInfoCreationTime | read-only | current | The sysUptime when the entry was turned active. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.2.1.13 | ColumndocsIfMCmtsDepiSessionInfoStorage | read-only | current | The storage realization of the entry. This object value is the same as the corresponding entry of docsIfMCmtsDepiSessionInfoStorage. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3 | TabledocsIfMCmtsDepiRsrcAllocTable | not-accessible | current | A table containing PHBIDs Resources used for DEPI applications. At the M-CMTS core these entries contain information about the mapping of egress traffic to PHI… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1 | RowdocsIfMCmtsDepiRsrcAllocEntry | not-accessible | current | A conceptual row for this table. At minimum two entries for docsIfMCmtsDepiRsrcAllocSeq (two Flow ID entries) per docsIfMCmtsDepiRsrcAllocIndex value are neede… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.1 | ColumndocsIfMCmtsDepiRsrcAllocIndex | not-accessible | current | The first index of this table. Multiple DEPI Flow Ids are within a docsIfMCmtsDepiRsrcAllocIndex value. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.2 | ColumndocsIfMCmtsDepiRsrcAllocSeq | not-accessible | current | The sequence index for entries within the same docsIfMCmtsDepiRsrcAllocIndex value. EQAM IP Host may reply with less PHBIDs than requested, then, the M-CMTS Co… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.3 | ColumndocsIfMCmtsDepiRsrcAllocPhbId | read-create | current | The PHB identifier (per-Hub-Behavior ID) associated to this entry. In PSP a minimum of two PHBIDs for two flow IDs corresponds to PHBIDs EF and BE. BE is the P… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.4 | ColumndocsIfMCmtsDepiRsrcAllocFlowId | read-create | current | The Flow ID value reported in the Resource Allocation Response for the corresponding PHBID. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.5 | ColumndocsIfMCmtsDepiRsrcAllocUdpPort | read-create | current | The UDP Port reported by the Resource Allocation Response for the corresponding PHBID in this table. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.6 | ColumndocsIfMCmtsDepiRsrcAllocPolicyScnTags | read-create | current | A list of Service Class Names (SCN) tags associated to PHBID/Flow IDs. The policies associated to each DEPI Flow ID of this table allow the mapping of specific… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.7 | ColumndocsIfMCmtsDepiRsrcAllocStorage | read-create | current | The storage realization of this entry. Entries corresponding to a Resource Allocation Response are of type 'volatile' and do not persist. Entries set as 'perma… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.3.1.8 | ColumndocsIfMCmtsDepiRsrcAllocRowStatus | read-create | current | The status of this conceptual row. Administratively created entries need only set the value of docsIfMCmtsDepiRsrcAllocPhbId to become 'active'. All other read… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.4 | TabledocsIfMCmtsDepiSessionStatsTable | not-accessible | current | This table provides DEPI Session statistics for the M-CMTS Downstream Interface. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.4.1 | RowdocsIfMCmtsDepiSessionStatsEntry | not-accessible | current | A conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.4.1.1 | ColumndocsIfMCmtsDepiSessionInfoOutOfSequencePkts | read-only | current | The count of DEPI session packets out of sequence. It is vendor dependent the re-sequence of DEPI packets. EQAM Implementations that do not re-sequence DEPI pa… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5 | NodedocsIfMCmtsDepiSessionCinLatency | |||
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.1 | ScalardocsIfMCmtsDepiSessionCinLatencyInterval | read-write | current | The time interval used to measure periodically the CIN latency per DEPI session. Active measurement of CIN latency applies to active DEPI sessions only. This o… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.2 | ScalardocsIfMCmtsDepiSessionCinLatencyThrshld | read-write | current | The CIN latency threshold measured in DOCSIS Master clock ticks to be reported as an event when exceeded. The DOCSIS Master Clock is the 10.24 MHz reference cl… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.3 | ScalardocsIfMCmtsDepiSessionCinEventLevel | read-write | current | The desired event level to report in case of the CIN latency threshold being exceeded. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.4 | ScalardocsIfMCmtsDepiSessionCinLastValue | read-only | current | The CIN latency value measured for the DEPI session pointed by docsIfMCmtsDepiSessionCinLastValueIfIndex. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.5 | ScalardocsIfMCmtsDepiSessionCinLastValueIfIndex | read-only | current | The ifIndex of the DEPI Session associated to the CIN latency value pointed measured for the DEPI session pointed by docsIfMCmtsDepiSessionCinLastValue. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.5.6 | ScalardocsIfMCmtsDepiSessionCinLatencyValueLastTime | read-only | current | The sysUpTime value of the last time the object docsIfMCmtsDepiSessionCinLastValue was updated. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.6 | TabledocsIfMCmtsDepiSessionCinLatencyPerfTable | not-accessible | current | This table provides accumulative measurements of the CIN latency on the network. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.6.1 | RowdocsIfMCmtsDepiSessionCinLatencyPerfEntry | not-accessible | current | A conceptual row for this table. It is a vendor implementation to limit the number of entries per DEPI session (ifIndex) to be stored in this table. When the t… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.6.1.1 | ColumndocsIfMCmtsDepiSessionCinLatencyPerfIntervalSeq | not-accessible | current | The interval sequence where the CIN latency measurement was taken. It is valid an implementation that overrides the oldest sequence number entry with the most … |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.6.1.2 | ColumndocsIfMCmtsDepiSessionCinLatencyPerfValue | read-only | current | The CIN latency value measured for the DEPI session pointed by this entry. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.1.6.1.3 | ColumndocsIfMCmtsDepiSessionCinLatencyTime | read-only | current | The sysUpTime value of the last time this entry was updated. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2 | NodedocsIfMCmtsDepiQosObjects | |||
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.1 | TabledocsIfMCmtsDepiPhbPolicyTable | not-accessible | current | The policy rules that apply to DOCSIS traffic (traffic profiles) of a DEPI session. Traffic Profiles are ways to discriminate specific traffic flows for QOS tr… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.1.1 | RowdocsIfMCmtsDepiPhbPolicyEntry | not-accessible | current | The conceptual Table entry. A consumer of this table uses a lexicographical matching of entries to apply the respective policy, e.g., this table is used for tw… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.1.1.1 | ColumndocsIfMCmtsDepiPhbPolicyTag | not-accessible | current | The index of the policy. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.1.1.2 | ColumndocsIfMCmtsDepiPhbPolicySCN | read-create | current | The Service Class Name used to map DOCSIS traffic to DEPI Flow IDs and/or CIN PHBIDs. This value is not null terminated as other DOCSIS interfaces defines SCN. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.1.1.3 | ColumndocsIfMCmtsDepiPhbPolicyCinPhbId | read-create | current | The CIN PHBID assigned to transport the DOCSIS traffic that matches docsIfMCmtsDepiPhbPolicySCN for the related DEPI session. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.1.1.4 | ColumndocsIfMCmtsDepiPhbPolicyStorage | read-create | current | The storage realization of this entry 'permanent' columnar objects allow write access. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.1.1.5 | ColumndocsIfMCmtsDepiPhbPolicyRowStatus | read-create | current | The status of this conceptual table. Changes in this columnar objects while this entry is active will take effect on new DOCSIS packets being mapped by this po… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.2 | TabledocsIfMCmtsQosServiceFlowExtTable | not-accessible | current | This table contains M-CMTS Extensions of the DOCSIS Service Flow table to describe DEPI QOS associations to Service Flows. DEPI Connection Control Table indica… |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.2.1 | RowdocsIfMCmtsQosServiceFlowExtEntry | not-accessible | current | An entry in the table exists for each Service Flow ID of a M-CMTS Downstream Interface type. This table is an extension of DocsQosServiceFlowEntry. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.2.1.1 | ColumndocsIfMCmtsQosServiceFlowExtDepiFlowId | read-only | current | The DEPI Flow ID associated with this Service Flow. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.2.1.2 | ColumndocsIfMCmtsQosServiceFlowExtCinPhbId | read-only | current | The CIN PHBID associated with this Service Flow. |
| 1.3.6.1.4.1.4491.2.1.6.1.4.2.2.1.3 | ColumndocsIfMCmtsQosServiceFlowExtDepiIfIndex | read-only | current | The ifIndex of the M-CMTS DS interface pertaining to this Service flow. |
| 1.3.6.1.4.1.4491.2.1.6.2 | NodedocsIfMCmtsConformance | |||
| 1.3.6.1.4.1.4491.2.1.6.2.1 | NodedocsIfMCmtsCompliances | |||
| 1.3.6.1.4.1.4491.2.1.6.2.1.1 | CompliancedocsIfMCmtsCoreDeviceCompliance | current | The compliance statement for M-CMTS Core compliant devices. | |
| 1.3.6.1.4.1.4491.2.1.6.2.1.2 | CompliancedocsIfMCmtsEQAMCompliance | not-accessible | current | The compliance statement for M-CMTS EQAM compliant devices. |
| 1.3.6.1.4.1.4491.2.1.6.2.2 | NodedocsIfMCmtsGroups | |||
| 1.3.6.1.4.1.4491.2.1.6.2.2.1 | GroupdocsIfMCmtsBaseGroup | current | Group of objects implemented in M-CMTS compliant devices. | |
| 1.3.6.1.4.1.4491.2.1.6.2.2.2 | GroupdocsIfMCmtsCoreGroup | current | Group of objects implemented in M-CMTS Core compliant devices. | |
| 1.3.6.1.4.1.4491.2.1.6.2.2.3 | GroupdocsIfMCmtsEqamDevGroup | current | Group of objects implemented in M-CMTS EQAM compliant devices. |