EXTREME-QOS-MIB
41 objects
Extreme Quality-of-Service objects
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.3 | IdentityextremeQos | Extreme Quality-of-Service objects | ||
| 1.3.6.1.4.1.1916.1.3.1 | NodeextremeQosCommon | |||
| 1.3.6.1.4.1.1916.1.3.1.1 | ScalarextremeUnitPaceMode | read-write | deprecated | This object specifies whether the device currently recognises and gives priority treatment to the forwarding of packets with the PACE(tm) bit set in their MAC … |
| 1.3.6.1.4.1.1916.1.3.1.4 | ScalarextremeQosMode | read-write | deprecated | Indicates which QoS mode the device should use. ingress(1) applies priority-based QoS based on the incoming packet's destination IP or MAC address, 802.1p prio… |
| 1.3.6.1.4.1.1916.1.3.1.5 | ScalarextremeQosUnconfigure | read-write | deprecated | Setting this to true will reset all QoS settings in the device to factory defaults. Reads from this value return an undefined value. |
| 1.3.6.1.4.1.1916.1.3.1.6 | TableextremeQosProfileTable | not-accessible | current | This table lists QoS profiles. |
| 1.3.6.1.4.1.1916.1.3.1.6.1 | RowextremeQosProfileEntry | not-accessible | current | An individual QoS profile Entry. |
| 1.3.6.1.4.1.1916.1.3.1.6.1.1 | ColumnextremeQosProfileIndex | read-create | current | An index that uniquely identifies an entry in the qos table. |
| 1.3.6.1.4.1.1916.1.3.1.6.1.2 | ColumnextremeQosProfileName | read-create | current | A unique qos profile name. |
| 1.3.6.1.4.1.1916.1.3.1.6.1.3 | ColumnextremeQosProfileMinBw | read-create | current | The minumum percentage of bandwidth that this queue requires. The Switch is required to provide the minumum amount of bandwidth to the queue. The lowest possib… |
| 1.3.6.1.4.1.1916.1.3.1.6.1.4 | ColumnextremeQosProfileMaxBw | read-create | current | The maximum percentage of bandwidth that this queue is permitted to use. If a non-default value is set for this object then it negates any previously set value… |
| 1.3.6.1.4.1.1916.1.3.1.6.1.5 | ColumnextremeQosProfilePriority | read-create | current | The level of priority in which this queue will be serviced by the Switch. |
| 1.3.6.1.4.1.1916.1.3.1.6.1.6 | ColumnextremeQosProfileRowStatus | read-create | current | The status of the extremeQosProfile entry. This object can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: ac… |
| 1.3.6.1.4.1.1916.1.3.1.7 | TableextremeQosByVlanMappingTable | not-accessible | current | Table to associate a Vlan with the QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table correspon… |
| 1.3.6.1.4.1.1916.1.3.1.7.1 | RowextremeQosByVlanMappingEntry | not-accessible | current | The QoS associated with a particular Vlan. |
| 1.3.6.1.4.1.1916.1.3.1.7.1.1 | ColumnextremeQosByVlanMappingQosProfileIndex | read-write | current | Value of extremeQosProfileIndex that uniquely identifies a QoS Profile entry in extremeQosProfileTable. This indicates the QoS to be given to traffic for this … |
| 1.3.6.1.4.1.1916.1.3.1.8 | TableextremePerPortQosTable | not-accessible | current | Global Qos Profiles are defined in the extremeQosProfileTable. This table contains a list of ports for which the definition of certain global Qos Profiles has … |
| 1.3.6.1.4.1.1916.1.3.1.8.1 | RowextremePerPortQosEntry | not-accessible | current | An individual overridden QoS profile Entry. |
| 1.3.6.1.4.1.1916.1.3.1.8.1.1 | ColumnextremePerPortQosIndex | read-create | current | The value of this variable is the same as the value of extremeQosProfileIndex of the Qos Profile which is overridden (for the port specified by ifIndex) by the… |
| 1.3.6.1.4.1.1916.1.3.1.8.1.2 | ColumnextremePerPortQosMinBw | read-create | current | The minumum percentage of bandwidth that this queue on the specified port requires. The Switch is required to provide the minumum amount of bandwidth to the qu… |
| 1.3.6.1.4.1.1916.1.3.1.8.1.3 | ColumnextremePerPortQosMaxBw | read-create | current | The maximum percentage of bandwidth that this queue on the specified port is permitted to use. |
| 1.3.6.1.4.1.1916.1.3.1.8.1.4 | ColumnextremePerPortQosPriority | read-create | current | The level of priority in which this queue will be serviced by the Switch. |
| 1.3.6.1.4.1.1916.1.3.1.8.1.5 | ColumnextremePerPortQosRowStatus | read-create | current | The status of the extremePerPortQos entry. This object can be set to active(1) createAndGo(4) The following value may be read: active(1) Note that a destroy(6)… |
| 1.3.6.1.4.1.1916.1.3.1.9 | TableextremeQosIngressPriorityTable | not-accessible | current | This table lists QoS ingress priority settings. |
| 1.3.6.1.4.1.1916.1.3.1.9.1 | RowextremeQosIngressPriorityEntry | not-accessible | current | An individual QoS ingress priority Entry. |
| 1.3.6.1.4.1.1916.1.3.1.9.1.1 | ColumnextremeQosIngressPriorityIndex | read-only | current | An index that uniquely identifies an entry in the qos ingress priority table. |
| 1.3.6.1.4.1.1916.1.3.1.9.1.2 | ColumnextremeQosIngressPriorityName | read-only | current | A qos ingress priority name. |
| 1.3.6.1.4.1.1916.1.3.1.9.1.3 | ColumnextremeQosIngressPriorityValue | read-only | current | The ingress Qos priority value. |
| 1.3.6.1.4.1.1916.1.3.1.10 | TableextremeIQosProfileTable | not-accessible | current | This table lists ingress QoS profiles. |
| 1.3.6.1.4.1.1916.1.3.1.10.1 | RowextremeIQosProfileEntry | not-accessible | current | An individual ingress QoS profile Entry. |
| 1.3.6.1.4.1.1916.1.3.1.10.1.1 | ColumnextremeIQosProfileIndex | read-only | current | An index that uniquely identifies an entry in the ingress Qos table. |
| 1.3.6.1.4.1.1916.1.3.1.10.1.2 | ColumnextremeIQosProfileName | read-only | current | A unique ingress Qos profile name. |
| 1.3.6.1.4.1.1916.1.3.1.10.1.3 | ColumnextremeIQosProfileMinBwType | read-only | current | The type of the current minimum bandwith setting. A value of 1 signifies that the minimum bandwith value is a percentage of the configurable port bandwidth. A … |
| 1.3.6.1.4.1.1916.1.3.1.10.1.4 | ColumnextremeIQosProfileMinBw | read-only | current | The guaranteed minimum bandwidth for this queue, expressed as either a percentage or a specific bandwidth value, as specified by the value of extremeIQosProfil… |
| 1.3.6.1.4.1.1916.1.3.1.10.1.5 | ColumnextremeIQosProfileMaxBwType | read-only | current | The type of the current maximum bandwith setting. A value of 1 signifies that the maximum bandwith value is a percentage of the configurable port bandwidth. A … |
| 1.3.6.1.4.1.1916.1.3.1.10.1.6 | ColumnextremeIQosProfileMaxBw | read-only | current | The maximum allowed input bandwidth for this queue, expressed as either a percentage or a specific bandwidth value, as specified by the value of extremeIQosPro… |
| 1.3.6.1.4.1.1916.1.3.1.10.1.7 | ColumnextremeIQosProfileRED | read-only | current | The Random Early Drop threshold. When the input queue fill ratio exceeds this percentage, frames start to drop randomly with a linear increasing drop probabili… |
| 1.3.6.1.4.1.1916.1.3.1.10.1.8 | ColumnextremeIQosProfileMaxBuf | read-only | current | The percentage of the total ingress queue size to use. Lower values can be used to reduce the max latency through this queue, but with potentially greater loss… |
| 1.3.6.1.4.1.1916.1.3.1.11 | TableextremeIQosByVlanMappingTable | not-accessible | current | Table to associate a Vlan with the ingress QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table c… |
| 1.3.6.1.4.1.1916.1.3.1.11.1 | RowextremeIQosByVlanMappingEntry | not-accessible | current | The ingress QoS associated with a particular Vlan. |
| 1.3.6.1.4.1.1916.1.3.1.11.1.1 | ColumnextremeIQosByVlanMappingIQosProfileIndex | read-only | current | Value of extremeIQosProfileIndex that uniquely identifies an ingress QoS Profile entry in extremeIQosProfileTable. This indicates the QoS to be given to traffi… |