EXTREME-VLAN-MIB
121 objects
Extreme Virtual LAN objects
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1916.1.2 | IdentityextremeVlan | Extreme Virtual LAN objects | ||
| 1.3.6.1.4.1.1916.1.2.1 | NodeextremeVlanGroup | |||
| 1.3.6.1.4.1.1916.1.2.1.1 | TableextremeVlanGlobalMappingTable | not-accessible | deprecated | This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a glob… |
| 1.3.6.1.4.1.1916.1.2.1.1.1 | RowextremeVlanGlobalMappingEntry | not-accessible | current | An individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTa… |
| 1.3.6.1.4.1.1916.1.2.1.1.1.1 | ColumnextremeVlanGlobalMappingIdentifier | read-only | current | An index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN … |
| 1.3.6.1.4.1.1916.1.2.1.1.1.2 | ColumnextremeVlanGlobalMappingIfIndex | read-only | current | The value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry. |
| 1.3.6.1.4.1.1916.1.2.1.2 | TableextremeVlanIfTable | not-accessible | current | This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be … |
| 1.3.6.1.4.1.1916.1.2.1.2.1 | RowextremeVlanIfEntry | not-accessible | current | An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIf… |
| 1.3.6.1.4.1.1916.1.2.1.2.1.1 | ColumnextremeVlanIfIndex | read-create | current | The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex … |
| 1.3.6.1.4.1.1916.1.2.1.2.1.2 | ColumnextremeVlanIfDescr | read-create | current | This is a description of the VLAN interface. |
| 1.3.6.1.4.1.1916.1.2.1.2.1.3 | ColumnextremeVlanIfType | read-create | current | The VLAN interface type. |
| 1.3.6.1.4.1.1916.1.2.1.2.1.4 | ColumnextremeVlanIfGlobalIdentifier | read-create | deprecated | An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, th… |
| 1.3.6.1.4.1.1916.1.2.1.2.1.6 | ColumnextremeVlanIfStatus | read-create | current | The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: ac… |
| 1.3.6.1.4.1.1916.1.2.1.2.1.7 | ColumnextremeVlanIfIgnoreStpFlag | read-write | current | Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, th… |
| 1.3.6.1.4.1.1916.1.2.1.2.1.8 | ColumnextremeVlanIfIgnoreBpduFlag | read-write | current | Setting this object to true causes this VLAN's BPDU's to be ignored by the Spanning Tree process. This can be used to keep the root bridge within one's own net… |
| 1.3.6.1.4.1.1916.1.2.1.2.1.9 | ColumnextremeVlanIfLoopbackModeFlag | read-write | current | Setting this object to true causes loopback mode to be enabled on this VLAN. |
| 1.3.6.1.4.1.1916.1.2.1.2.1.10 | ColumnextremeVlanIfVlanId | read-write | current | The VLAN ID of this VLAN. |
| 1.3.6.1.4.1.1916.1.2.1.2.1.11 | ColumnextremeVlanIfEncapsType | read-create | current | The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. |
| 1.3.6.1.4.1.1916.1.2.1.2.1.12 | ColumnextremeVlanIfAdminStatus | read-write | current | Enable/disable this VLAN interface. Setting this object to true will administratively enable this VLAN. |
| 1.3.6.1.4.1.1916.1.2.2 | NodeextremeVirtualGroup | |||
| 1.3.6.1.4.1.1916.1.2.2.1 | ScalarextremeNextAvailableVirtIfIndex | read-only | current | The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The curr… |
| 1.3.6.1.4.1.1916.1.2.3 | NodeextremeEncapsulationGroup | |||
| 1.3.6.1.4.1.1916.1.2.3.1 | TableextremeVlanEncapsIfTable | not-accessible | current | This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the syst… |
| 1.3.6.1.4.1.1916.1.2.3.1.1 | RowextremeVlanEncapsIfEntry | not-accessible | current | An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextA… |
| 1.3.6.1.4.1.1916.1.2.3.1.1.1 | ColumnextremeVlanEncapsIfIndex | read-create | current | The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by … |
| 1.3.6.1.4.1.1916.1.2.3.1.1.2 | ColumnextremeVlanEncapsIfType | read-create | current | The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. |
| 1.3.6.1.4.1.1916.1.2.3.1.1.3 | ColumnextremeVlanEncapsIfTag | read-create | current | The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. |
| 1.3.6.1.4.1.1916.1.2.3.1.1.4 | ColumnextremeVlanEncapsIfStatus | read-create | current | The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may … |
| 1.3.6.1.4.1.1916.1.2.4 | NodeextremeVlanIpGroup | |||
| 1.3.6.1.4.1.1916.1.2.4.1 | TableextremeVlanIpTable | not-accessible | current | A list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index. |
| 1.3.6.1.4.1.1916.1.2.4.1.1 | RowextremeVlanIpEntry | not-accessible | current | A extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface. |
| 1.3.6.1.4.1.1916.1.2.4.1.1.1 | ColumnextremeVlanIpNetAddress | read-create | current | The IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index. |
| 1.3.6.1.4.1.1916.1.2.4.1.1.2 | ColumnextremeVlanIpNetMask | read-create | current | The IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress. |
| 1.3.6.1.4.1.1916.1.2.4.1.1.3 | ColumnextremeVlanIpStatus | read-create | current | The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) destroy(6) The following values may be read: active(1) Setting th… |
| 1.3.6.1.4.1.1916.1.2.4.1.1.4 | ColumnextremeVlanIpForwardingState | read-create | current | Indicates whether the IP Forwarding on this Vlan is Enable or not. A true value indicates that the Vlan is Enable. |
| 1.3.6.1.4.1.1916.1.2.5 | NodeextremeProtocolGroup | |||
| 1.3.6.1.4.1.1916.1.2.5.1 | TableextremeVlanProtocolTable | not-accessible | current | Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProto… |
| 1.3.6.1.4.1.1916.1.2.5.1.1 | RowextremeVlanProtocolEntry | not-accessible | current | One member protocol ID of a protocol definition. |
| 1.3.6.1.4.1.1916.1.2.5.1.1.1 | ColumnextremeVlanProtocolIndex | read-create | current | An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare and 16 in EXOS).… |
| 1.3.6.1.4.1.1916.1.2.5.1.1.2 | ColumnextremeVlanProtocolIdIndex | read-create | current | An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to … |
| 1.3.6.1.4.1.1916.1.2.5.1.1.3 | ColumnextremeVlanProtocolName | read-create | current | A human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProto… |
| 1.3.6.1.4.1.1916.1.2.5.1.1.4 | ColumnextremeVlanProtocolDllEncapsType | read-create | current | Represents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and m… |
| 1.3.6.1.4.1.1916.1.2.5.1.1.5 | ColumnextremeVlanProtocolId | read-create | current | The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a conca… |
| 1.3.6.1.4.1.1916.1.2.5.1.1.6 | ColumnextremeVlanProtocolStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.1916.1.2.5.2 | TableextremeVlanProtocolVlanTable | not-accessible | current | Table to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited… |
| 1.3.6.1.4.1.1916.1.2.5.2.1 | RowextremeVlanProtocolVlanEntry | not-accessible | current | A mapping of untagged packets of one protocol onto a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.5.2.1.1 | ColumnextremeVlanProtocolVlanIfIndex | read-create | current | The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex … |
| 1.3.6.1.4.1.1916.1.2.5.2.1.2 | ColumnextremeVlanProtocolVlanProtocolIndex | read-create | current | An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare). |
| 1.3.6.1.4.1.1916.1.2.5.2.1.3 | ColumnextremeVlanProtocolVlanStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.1916.1.2.5.3 | TableextremeVlanProtocolDefTable | not-accessible | current | Table of defined combinations of protocols and DLLEncaps type. This table will typically contain some default entries for popular protocols chosen by ExtremeWa… |
| 1.3.6.1.4.1.1916.1.2.5.3.1 | RowextremeVlanProtocolDefEntry | not-accessible | current | One member representing combination of protocol and DLLEncaps Type. |
| 1.3.6.1.4.1.1916.1.2.5.3.1.1 | ColumnextremeVlanProtocolDefName | not-accessible | current | A human-readable string representing this protocol. A ExtremeVlanProtocolEntry with extremeVlanProtocol2Name of ANY represents a match on all protocols: this e… |
| 1.3.6.1.4.1.1916.1.2.5.3.1.2 | ColumnextremeVlanProtocolDefDllEncapsType | not-accessible | current | Represents the type of data-link encapsulation in which the protocol designated by extremeVlanProtocolDefName is carried. The value any(1) is used to indicate … |
| 1.3.6.1.4.1.1916.1.2.5.3.1.3 | ColumnextremeVlanProtocolDefValue | not-accessible | current | The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a conca… |
| 1.3.6.1.4.1.1916.1.2.5.3.1.4 | ColumnextremeVlanProtocolDefStatus | read-only | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.1916.1.2.5.4 | TableextremeVlanProtocolBindingTable | not-accessible | current | Table to apply one of the protocol definitions in extremeVlanProtocolDefTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limi… |
| 1.3.6.1.4.1.1916.1.2.5.4.1 | RowextremeVlanProtocolBindingEntry | not-accessible | current | A mapping of untagged packets of one protocol onto a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.5.4.1.1 | ColumnextremeVlanProtocolBindingIfIndex | not-accessible | current | The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex … |
| 1.3.6.1.4.1.1916.1.2.5.4.1.2 | ColumnextremeVlanProtocolBindingName | read-create | current | A human-readable string representing this protocol. A ExtremeVlanProtocolBindingEntry with extremeVlanProtocolBindingName of ANY represents a match on all prot… |
| 1.3.6.1.4.1.1916.1.2.5.4.1.3 | ColumnextremeVlanProtocolBindingStatus | read-only | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.1916.1.2.6 | NodeextremeVlanOpaqueGroup | |||
| 1.3.6.1.4.1.1916.1.2.6.1 | TableextremeVlanOpaqueTable | not-accessible | current | This table lists the ports associated with each VLAN interface. |
| 1.3.6.1.4.1.1916.1.2.6.1.1 | RowextremeVlanOpaqueEntry | not-accessible | current | This represents the tagged and untagged ports on each slot per vlan. |
| 1.3.6.1.4.1.1916.1.2.6.1.1.1 | ColumnextremeVlanOpaqueTaggedPorts | read-only | current | Each bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise. |
| 1.3.6.1.4.1.1916.1.2.6.1.1.2 | ColumnextremeVlanOpaqueUntaggedPorts | read-only | current | Each bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise. |
| 1.3.6.1.4.1.1916.1.2.6.2 | TableextremeVlanOpaqueControlTable | not-accessible | current | This table is used to configure the ports associated with each VLAN interface. The table is used to add/delete ports on a vlan. The table is transitional in na… |
| 1.3.6.1.4.1.1916.1.2.6.2.1 | RowextremeVlanOpaqueControlEntry | not-accessible | current | This represents a control table entry (command) to configure the tagged and untagged ports on each slot per vlan. The first index of the entry is the ifIndex o… |
| 1.3.6.1.4.1.1916.1.2.6.2.1.1 | ColumnextremeVlanOpaqueControlPorts | read-create | current | The octet string representing a list of ports in bitwise form. |
| 1.3.6.1.4.1.1916.1.2.6.2.1.2 | ColumnextremeVlanOpaqueControlOperation | read-create | current | The operation code for this entry. addTagged(1) = Ports referred to in the extremeVlanOpaqueControlPorts variable are added as tagged ports to the VLAN indicat… |
| 1.3.6.1.4.1.1916.1.2.6.2.1.3 | ColumnextremeVlanOpaqueControlStatus | read-write | current | The status of this entry as per standard RowStatus conventions. Note however, that only the CreateAndGo state is supported. |
| 1.3.6.1.4.1.1916.1.2.7 | NodeextremeVlanStackGroup | |||
| 1.3.6.1.4.1.1916.1.2.7.1 | TableextremeVlanStackTable | not-accessible | current | Represents those components of the ifStackTable that do not contain a Physical interface. |
| 1.3.6.1.4.1.1916.1.2.7.1.1 | RowextremeVlanStackEntry | not-accessible | current | Each entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physic… |
| 1.3.6.1.4.1.1916.1.2.7.1.1.1 | ColumnextremeVlanStackHigherLayer | read-only | current | The higher layer in the logical vlan hierarchy. |
| 1.3.6.1.4.1.1916.1.2.7.1.1.2 | ColumnextremeVlanStackLowerLayer | read-only | current | The lower layer in the logical vlan hierarchy. |
| 1.3.6.1.4.1.1916.1.2.8 | NodeextremeVlanStatsGroup | |||
| 1.3.6.1.4.1.1916.1.2.8.1 | TableextremeVlanL2StatsTable | not-accessible | current | This tables contains per-VLAN layer 2 statistics information. |
| 1.3.6.1.4.1.1916.1.2.8.1.1 | RowextremeVlanL2StatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.1916.1.2.8.1.1.1 | ColumnextremeVlanL2StatsIfDescr | read-only | current | This is a description(name) of the VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.1.1.2 | ColumnextremeVlanL2StatsPktsToCpu | read-only | current | The total number of packets of this VLAN sent to the CPU. |
| 1.3.6.1.4.1.1916.1.2.8.1.1.3 | ColumnextremeVlanL2StatsPktsLearnt | read-only | current | The total number of packets learnt on this VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.1.1.4 | ColumnextremeVlanL2StatsIgmpCtrlPktsSnooped | read-only | current | The total number of IGMP control packets snooped on this VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.1.1.5 | ColumnextremeVlanL2StatsIgmpDataPktsSwitched | read-only | current | The total number of IGMP data packets switched on this VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2 | TableextremePortVlanStatsTable | not-accessible | current | Vlan statistics per port. |
| 1.3.6.1.4.1.1916.1.2.8.2.1 | RowextremePortVlanStatsEntry | not-accessible | current | Vlan port statistics Entry. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.1 | ColumnextremeStatsPortIfIndex | read-only | current | The index of this table. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.2 | ColumnextremeStatsVlanNameIndex | read-only | current | The index of this table. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.3 | ColumnextremePortVlanStatsCntrType | read-only | current | The flag to decide what fields to display, basic or extended. Currently, it is read-only and will reflect whatever has been set for the switch through the cli. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.4 | ColumnextremePortVlanUnicastReceivedPacketsCounter | read-only | current | The number of Unicast packets received by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.5 | ColumnextremePortVlanMulticastReceivedPacketsCounter | read-only | current | The number of Multicast packets received by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.6 | ColumnextremePortVlanBroadcastReceivedPacketsCounter | read-only | current | The number of Broadcast packets received by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.7 | ColumnextremePortVlanTotalReceivedBytesCounter | read-only | current | The total number of bytes received by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.8 | ColumnextremePortVlanTotalReceivedFramesCounter | read-only | current | The total number of frames received by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.9 | ColumnextremePortVlanUnicastTransmittedPacketsCounter | read-only | current | The number of Unicast packets transmitted by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.10 | ColumnextremePortVlanMulticastTransmittedPacketsCounter | read-only | current | The number of Multicast packets transmitted by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.11 | ColumnextremePortVlanBroadcastTransmittedPacketsCounter | read-only | current | The number of Broadcast packets transmitted by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.12 | ColumnextremePortVlanTotalTransmittedBytesCounter | read-only | current | The total number of bytes transmitted by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.13 | ColumnextremePortVlanTotalTransmittedFramesCounter | read-only | current | The total number of frames transmitted by a port for a particular VLAN. |
| 1.3.6.1.4.1.1916.1.2.8.2.1.14 | ColumnextremePortConfigureVlanStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.1916.1.2.9 | NodeextremeVlanAggregationGroup | |||
| 1.3.6.1.4.1.1916.1.2.9.1 | TableextremeVlanAggregationTable | not-accessible | current | This table contains the VLAN aggregation information. |
| 1.3.6.1.4.1.1916.1.2.9.1.1 | RowextremeVlanAggregationEntry | not-accessible | current | Information about the individual VLAN aggregation entry. |
| 1.3.6.1.4.1.1916.1.2.9.1.1.1 | ColumnextremeVlanAggregationSuperVlanIfIndex | read-only | current | The Super Vlan index for this entry. |
| 1.3.6.1.4.1.1916.1.2.9.1.1.2 | ColumnextremeVlanAggregationSubVlanIfIndex | read-only | current | The Sub Vlan index for this entry. |
| 1.3.6.1.4.1.1916.1.2.9.1.1.3 | ColumnextremeVlanAggregationSubVlanStartIpNetAddress | read-create | current | This represents the start network address of the IP range. |
| 1.3.6.1.4.1.1916.1.2.9.1.1.4 | ColumnextremeVlanAggregationSubVlanStartIpNetMask | read-only | current | This represents the start network address mask of the IP range |
| 1.3.6.1.4.1.1916.1.2.9.1.1.5 | ColumnextremeVlanAggregationSubVlanEndIpNetAddress | read-create | current | This represents the end network address of the IP range. |
| 1.3.6.1.4.1.1916.1.2.9.1.1.6 | ColumnextremeVlanAggregationSubVlanEndIpNetMask | read-only | current | This represents the end network address mask of the IP range. |
| 1.3.6.1.4.1.1916.1.2.9.1.1.7 | ColumnextremeVlanAggregationStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.1916.1.2.9.2 | TableextremeVlanAggregationConfigTable | not-accessible | current | This table contains the sub VLAN proxy setting information. |
| 1.3.6.1.4.1.1916.1.2.9.2.1 | RowextremeVlanAggregationConfigEntry | not-accessible | current | Information about the individual VLAN aggregation entry. |
| 1.3.6.1.4.1.1916.1.2.9.2.1.1 | ColumnextremeVlanAggregationConfigSuperVlanIfIndex | read-only | current | The Super Vlan index for this entry. |
| 1.3.6.1.4.1.1916.1.2.9.2.1.2 | ColumnextremeVlanAggregationConfigSubVlanProxyEnable | read-create | current | The boolean flag that prevents normal communication between sub vlans. |
| 1.3.6.1.4.1.1916.1.2.10 | NodeextremeVlanTranslationGroup | |||
| 1.3.6.1.4.1.1916.1.2.10.1 | TableextremeVlanTranslationTable | not-accessible | current | This table contains the VLAN translation information. |
| 1.3.6.1.4.1.1916.1.2.10.1.1 | RowextremeVlanTranslationEntry | not-accessible | current | Information about the individual VLAN translation entry. |
| 1.3.6.1.4.1.1916.1.2.10.1.1.1 | ColumnextremeVlanTranslationSuperVlanIfIndex | read-only | current | The Super Vlan index for this entry. |
| 1.3.6.1.4.1.1916.1.2.10.1.1.2 | ColumnextremeVlanTranslationMemberVlanIfIndex | read-only | current | The member Vlan index for this entry. |
| 1.3.6.1.4.1.1916.1.2.10.1.1.3 | ColumnextremeVlanTranslationStatus | read-create | current | The status of this entry. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ExtremeVlanEncapsType | INTEGER { vlanEncaps8021q(1), vlanEncapsNone(2) } | ||
| ExtremeVlanType | INTEGER { vlanLayer2(1) } |