F3-AMP-MIB
63 objects
This module defines the Automatic Management Provisioning MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | VlanId |
| CM-IP-MIB | IpManagementTunnelEncapsulationType IpManagementTunnelType IpSourceAddrType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.24 | Identityf3AMPMIB | This module defines the Automatic Management Provisioning MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.24.1 | Nodef3AmpConfigObjects | |||
| 1.3.6.1.4.1.2544.1.12.24.1.1 | Tablef3AmpConfigTable | not-accessible | current | A list of entries corresponding to Automatic Management Provisioning configuration instance for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1 | Rowf3AmpConfigEntry | not-accessible | current | A conceptual row in the f3AmpConfigTable. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.1 | Columnf3AmpConfigIndex | not-accessible | current | An integer index value used to uniquely identify this AMP Config within the System. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.2 | Columnf3AmpConfigRole | read-create | current | Configures AMP instance to be either Client or Server. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.3 | Columnf3AmpConfigProtocol | read-create | current | Configures protocol over which AMP message will be transported. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.4 | Columnf3AmpConfigEnabled | read-create | current | Enables or Disables AMP on a Port. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.5 | Columnf3AmpConfigPort | read-create | current | Port on which AMP Server or Client will operate. This port will transmit/receive AMP messages. The AMP can operate on Access Ports and Network Port and f3AmpCo… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.6 | Columnf3AmpConfigStatus | read-only | current | The Status of AMP. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.7 | Columnf3AmpConfigRemSysName | read-create | current | When f3AmpConfigRole is 'server' this object specifies sysName which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.8 | Columnf3AmpConfigRemSysIpAddr | read-create | current | When f3AmpConfigRole is 'server' this object specifies System IP address which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpCon… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.9 | Columnf3AmpConfigRemSysIpMask | read-create | current | When f3AmpConfigRole is 'server' this object specifies System IP mask which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfig… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.10 | Columnf3AmpConfigRemSysDefGateway | read-create | current | When f3AmpConfigRole is 'server' this object specifies System Default Gateway which is sent in a AMP message to be configfured on a AMP Client device. When f3A… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.11 | Columnf3AmpConfigRemSysSNMPV1IfName | read-only | current | When f3AmpConfigRole is 'server' this object specifies System SNMPV1 Interface Name which is sent in a AMP message to be configfured on a AMP Client device. Wh… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.12 | Columnf3AmpConfigRemSysSrcIpAddrType | read-only | current | When f3AmpConfigRole is 'server' this object specifies System Source IP Address type which is sent in an AMP message to be configfured on an AMP Client device.… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.13 | Columnf3AmpConfigRemSysSrcIpAddrIfName | read-only | current | When f3AmpConfigRole is 'server' this object specifies System Source IP Interface name sent in an AMP message to be configured on an AMP Client device. When f3… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.14 | Columnf3AmpConfigRemTunnelIndex | read-create | current | When f3AmpConfigRole is 'server' this object specifies index of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. … |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.15 | Columnf3AmpConfigRemTunnelName | read-create | current | When f3AmpConfigRole is 'server' this object specifies a Management Tunnel name which is sent in an AMP message to be configfured on an AMP Client device. When… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.16 | Columnf3AmpConfigRemTunnelType | read-create | current | When f3AmpConfigRole is 'server' this object specifies a Management Tunnel type value which is sent in an AMP message to be configfured on an AMP Client device… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.17 | Columnf3AmpConfigRemTunnelIpAddr | read-create | current | When f3AmpConfigRole is 'server' this object specifies IP Address of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client dev… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.18 | Columnf3AmpConfigRemTunnelIpMask | read-create | current | When f3AmpConfigRole is 'server' this object specifies IP Mask of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.19 | Columnf3AmpConfigRemTunnelVlanId | read-create | current | When f3AmpConfigRole is 'server' this object specifies VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device.… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.20 | Columnf3AmpConfigRemTunnelSVlanId | read-create | current | When f3AmpConfigRole is 'server' this object specifies S-TAG VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client d… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.21 | Columnf3AmpConfigRemTunnelSVlanIdEnabled | read-create | current | When f3AmpConfigRole is 'server' this object specifies a Management Tunnel S-TAG VlanId Enable value which is sent in an AMP message to be configfured on an AM… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.22 | Columnf3AmpConfigRemTunnelRip2PktsEnabled | read-create | current | When f3AmpConfigRole is 'server' this object specifies a Management Tunnel RIP2 Packates Enabled value which is sent in an AMP message to be configfured on an … |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.23 | Columnf3AmpConfigRemTunnelCOS | read-create | current | When f3AmpConfigRole is 'server' this object specifies COS of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. Wh… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.24 | Columnf3AmpConfigRemTunnelCIR | read-create | current | When f3AmpConfigRole is 'server' this object specifies CIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. Wh… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.25 | Columnf3AmpConfigRemTunnelEIR | read-create | current | When f3AmpConfigRole is 'server' this object specifies EIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. Wh… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.26 | Columnf3AmpConfigRemTunnelBufferSize | read-create | current | When f3AmpConfigRole is 'server' this object specifies Buffer Size of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client de… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.27 | Columnf3AmpConfigRemTunnelEncapType | read-create | current | When f3AmpConfigRole is 'server' this object specifies Encapsulation Type of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Cl… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.28 | Columnf3AmpConfigRemTunnelMtu | read-create | current | When f3AmpConfigRole is 'server' this object specifies MTU of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. Wh… |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.29 | Columnf3AmpConfigAction | read-create | current | This object may be used to initiate user action on this AMP Config instance. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.30 | Columnf3AmpConfigStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.24.1.1.1.31 | Columnf3AmpConfigRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.24.2 | Nodef3AmpStatsObjects | |||
| 1.3.6.1.4.1.2544.1.12.24.2.1 | Tablef3AmpStatsTable | not-accessible | current | A list of entries corresponding to Automatic Management Provisioning Statistics |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1 | Rowf3AmpStatsEntry | not-accessible | current | A conceptual row in the f3AmpStatsTable. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.1 | Columnf3AmpStatsProvDataTx | read-only | current | The number of Provisioning Data messages sent by AMP Server. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.2 | Columnf3AmpStatsProvDataRx | read-only | current | The number of Provisioning Data messages received by AMP Client. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.3 | Columnf3AmpStatsProvRequestTx | read-only | current | The number of Provisioning Request messages sent by AMP Client. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.4 | Columnf3AmpStatsProvRequestRx | read-only | current | The number of Provisioning Request received sent by AMP Server. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.5 | Columnf3AmpStatsConfigSuccessTx | read-only | current | The number of Configuration Success messages sent sent by AMP Client. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.6 | Columnf3AmpStatsConfigSuccessRx | read-only | current | The number of Configuration Success messages received by AMP Server. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.7 | Columnf3AmpStatsConfigFailTx | read-only | current | The number of Configuration Success messages received by AMP Client. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.8 | Columnf3AmpStatsConfigFailRx | read-only | current | The number of Configuration Success messages received by AMP Server. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.9 | Columnf3AmpStatsSpuriousMessageRx | read-only | current | The number of Spurious messages received by AMP Client or Server |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.10 | Columnf3AmpStatsTimeoutRx | read-only | current | The number of messages which were not received within the time out value. AMP Client can time out while waiting for Prov Data message. AMP Server can time out … |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.11 | Columnf3AmpStatsLastRxStatus | read-only | current | Last received Configuration Status. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.12 | Columnf3AmpStatsRxTimeStamp | read-only | current | Time of last received Configuration Status. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.13 | Columnf3AmpStatsLastTxStatus | read-only | current | Last sent Configuration Status. |
| 1.3.6.1.4.1.2544.1.12.24.2.1.1.14 | Columnf3AmpStatsTxTimeStamp | read-only | current | Time of last sent Configuration Status. |
| 1.3.6.1.4.1.2544.1.12.24.3 | Nodef3AmpConformance | |||
| 1.3.6.1.4.1.2544.1.12.24.3.1 | Nodef3AmpCompliances | |||
| 1.3.6.1.4.1.2544.1.12.24.3.1.1 | Compliancef3AmpCompliance | current | Describes the requirements for conformance to the F3-AMP-MIB compilance. | |
| 1.3.6.1.4.1.2544.1.12.24.3.2 | Nodef3AmpGroups | |||
| 1.3.6.1.4.1.2544.1.12.24.3.2.1 | Groupf3AmpConfigGroup | current | A collection of objects used to manage the AMP Configuration. | |
| 1.3.6.1.4.1.2544.1.12.24.3.2.2 | Groupf3AmpStatsGroup | current | A collection of objects used to manage the AMP Statistics. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AMPConfigAction | INTEGER { noAction (1), clearStats (2) } | current | Defines Actions available for f3AmpConfig object |
| AMPConfigStatus | INTEGER { none (1), provision (2), noPeer (3), request (4), configSuccess (5), configFail (6), timeout (7) } | current | Defines AMP Configuration Status. |
| AMPProtocol | INTEGER { efmOam (1) } | current | Defines protocol over which AMP messages are sent. |
| AMPRole | INTEGER { client (1), server (2) } | current | Defines client or server role. |
| AMPStatus | INTEGER { notAvailable (1), disabled (2), associatingActive (3), associatingPassive (4), associated (5), noPeer (6) } | current | Defines AMP Status. |