MIB Viewer

F3-EOTDM-MIB

42 objects
This module defines the EOTDM MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
OIDNameAccessStatusDescription
1.3.6.1.4.1.2544.1.12.17Identityf3EOTDMMIBThis module defines the EOTDM MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
1.3.6.1.4.1.2544.1.12.17.1Nodef3EotdmObjects
1.3.6.1.4.1.2544.1.12.17.1.1TablevcgTablenot-accessiblecurrentA list of entries corresponding to virtual concatenate groups.
1.3.6.1.4.1.2544.1.12.17.1.1.1RowvcgEntrynot-accessiblecurrentA conceptual row in the vcgTable.
1.3.6.1.4.1.2544.1.12.17.1.1.1.1ColumnvcgIndexread-onlycurrentAn integer index value used to uniquely identify this vcg within a card.
1.3.6.1.4.1.2544.1.12.17.1.1.1.2ColumnvcgIfIndexread-onlycurrentThis object has the same value as ifIndex for vcg.
1.3.6.1.4.1.2544.1.12.17.1.1.1.3ColumnvcgAssociatedEthernetPortread-onlycurrentThis object describes the related Ethernet Port of the vcg.
1.3.6.1.4.1.2544.1.12.17.1.1.1.4ColumnvcgAdminStateread-writecurrentThis object represents the Administrative State of the vcg.
1.3.6.1.4.1.2544.1.12.17.1.1.1.5ColumnvcgOperationalStateread-onlycurrentThis object represents the Operational State of the vcg.
1.3.6.1.4.1.2544.1.12.17.1.1.1.6ColumnvcgSecondaryStateread-onlycurrentThis object represents the Secondary State of the vcg.
1.3.6.1.4.1.2544.1.12.17.1.1.1.7ColumnvcgTyperead-onlycurrentType of paths in this VCG. All paths in this VCG are the same type. This is a required field when creating a VCG, and can not be changed on an existing VCG. Se…
1.3.6.1.4.1.2544.1.12.17.1.1.1.8ColumnvcgLcasEnabledread-writecurrentThis object provides whether Lcas is enabled/disabled.
1.3.6.1.4.1.2544.1.12.17.1.1.1.9ColumnvcgWtrTimerread-writecurrentThis object specifies wait to restore(WTR) time for LCAS protocol. When creating VCG with LCAS enabled, it is the default value, says 5 minutes. When creating …
1.3.6.1.4.1.2544.1.12.17.1.1.1.10ColumnvcgHoldOffTimerread-writecurrentThis object specifies hold off time for LCAS protocol. When creating VCG with LCAS enabled, it is the default value, says 0 ms. When creating VCG with LCAS dis…
1.3.6.1.4.1.2544.1.12.17.1.1.1.11ColumnvcgClearWtrTimerread-createcurrentThis object will trigger an action. When writing with '1', a 'clear WTR timer' action for all paths in the VCG is triggered. Writing '0' is no effect. When rea…
1.3.6.1.4.1.2544.1.12.17.1.1.1.12ColumnvcgRowStatusread-createcurrentThe status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description …
1.3.6.1.4.1.2544.1.12.17.1.2TablevcgMemberTablenot-accessiblecurrentA list of entries corresponding to VCGs. Each entry of the table represents a path which is allocated to a VCG.
1.3.6.1.4.1.2544.1.12.17.1.2.1RowvcgMemberEntrynot-accessiblecurrentA conceptual row in the vcgMemberTable.
1.3.6.1.4.1.2544.1.12.17.1.2.1.1ColumnvcgMemberIndexread-onlycurrentAn integer index value used to uniquely identify this vcg member.
1.3.6.1.4.1.2544.1.12.17.1.2.1.2ColumnvcgMemberIfIndexread-createcurrentThis object has the same value as ifIndex for vcg path. An integer index value used to uniquely identify this vcg path.
1.3.6.1.4.1.2544.1.12.17.1.2.1.3ColumnvcgMemberRowStatusread-createcurrentThe status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description …
1.3.6.1.4.1.2544.1.12.17.1.2.1.4ColumnvcgMemberSoSendSeqread-onlycurrentAs the source side, this object reports the sequence number sent to the sink side. The sequence number is determined by the LCAS protocol (when LCAS is enabled…
1.3.6.1.4.1.2544.1.12.17.1.2.1.5ColumnvcgMemberSoLcasSendCtrlread-onlycurrentAs the source side, this object reports the CTRL status which is sent to the sink side. The CTRL status is determined by the LCAS protocol. When LCAS is not us…
1.3.6.1.4.1.2544.1.12.17.1.2.1.6ColumnvcgMemberSoLcasRecvMstread-onlycurrentAs the source side, this object reports the member status which is received from sink side. The member status is determined by the LCAS protocol. When LCAS is …
1.3.6.1.4.1.2544.1.12.17.1.2.1.7ColumnvcgMemberSoLcasStateread-onlycurrentThis object reports the current source status of this path as determined by the LCAS protocol. When LCAS is not in use, the value 'srcNotAppl' is returned.
1.3.6.1.4.1.2544.1.12.17.1.2.1.8ColumnvcgMemberSkRecvSeqread-onlycurrentAs the sink side, this object reports the sequence number which is received from source side. If SQ is invalid, -1 is returned.
1.3.6.1.4.1.2544.1.12.17.1.2.1.9ColumnvcgMemberSkRecvExpectSeqread-onlycurrentAs the sink side, this object reports the sequence number expected. If LCAS is enabled, this value is -1. Otherwise, it's the order that each path was added in…
1.3.6.1.4.1.2544.1.12.17.1.2.1.10ColumnvcgMemberSkLcasRecvCtrlread-onlycurrentAs the sink side, this object reports the CTRL status which is received from source side. The CTRL status is determined by the LCAS protocol. When LCAS is not …
1.3.6.1.4.1.2544.1.12.17.1.2.1.11ColumnvcgMemberSkLcasSendMstread-onlycurrentAs the sink side, this object reports the member status which is sent to source side. The 'member status' is determined by the status of received path member. …
1.3.6.1.4.1.2544.1.12.17.1.2.1.12ColumnvcgMemberSkLcasStateread-onlycurrentThis object reports the current sink status of this path as determined by the LCAS protocol. When LCAS is not in use, the value 'sinkNotAppl' is returned.
1.3.6.1.4.1.2544.1.12.17.2Nodef3EotdmConformance
1.3.6.1.4.1.2544.1.12.17.2.1Nodef3EotdmCompliances
1.3.6.1.4.1.2544.1.12.17.2.1.1Compliancef3EotdmCompliancecurrentDescribes the requirements for conformance to the f3 Tdm group.
1.3.6.1.4.1.2544.1.12.17.2.2Nodef3EotdmGroups
1.3.6.1.4.1.2544.1.12.17.2.2.1Groupf3EotdmObjectGroupcurrentA collection of objects used to manage the f3 Tdm group.
Type Definitions
NameSyntaxStatusDescription
CtrlStateINTEGER { ctrlNotAppl (0), ctrlFixed (1), ctrlAdd (2), ctrlNorm (3), ctrlEos (4), ctrlIdle (5), ctrlDnu (6) }currentDiscribes the CTRL status of a virtual container in LCAS control packet: - ctrlNotAppl: NA: Not applicable, ie, this VC is not allocated to a VCG or LCAS is disabled - ctrlFixed: FIXED: This end uses fixed bandwidth (no…
HoldOffTimeINTEGER (0..100)currentHold off time for LCAS protocol when the dMSU defect occured (Unit: 100ms).
LcasSkStateINTEGER { sinkNotAppl (0), sinkIdle (1), sinkOk (2), sinkFail (3) }currentThe status of LCAS protocol at the sink end of a virtual container: - sinkNotAppl: NA: Not applicable, ie, this VC is not allocated to a VCG or LCAS is disabled - sinkIdle: IDLE: The virtual container is not in use. - s…
LcasSoStateINTEGER { srcNotAppl (0), srcIdle (1), srcAdd (2), srcNorm (3), srcDnu (4), srcRemove (5) }currentThe status of LCAS protocol at the source end of a virtual container: - srcNotAppl: NA: Not applicable, ie, this VC is not allocated to a VCG or LCAS is disabled -srcIdle: IDLE: The VC is not in use or has been removed.…
MstStateINTEGER { mstNotAppl (0), mstOk (1), mstFail (2) }currentDiscribes the MST status of a virtual container in LCAS control packet: - mstNotAppl: NA: Not applicable, ie, this VC is not allocated to a VCG or LCAS is disabled - mstOk: OK: The MST status of this virtual container i…
VcgTypeINTEGER { none (0), t1 (1), e1 (2), t3 (3), e3 (4), vc12 (5), vc3 (6), vc4 (7), vt15 (8), sts1 (9), sts3c (10) }currentDescribes the VC type in a virtual concatenate group. All VCs in this group is the same type.
WtrTimeINTEGER (0..12)currentWait to restore(WTR) time for LCAS protocol when the dMSU defect occured (Unit: minute).