F3-OSPF-MIB
63 objects
This module defines the OSPF MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-IP-MIB | cmIpInterfaceEntry ipManagementTunnelEntry |
| OSPF-MIB | AreaID DesignatedRouterPriority HelloRange OspfAuthenticationType ospfNbrEntry RouterID |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.35 | Identityf3OspfMIB | This module defines the OSPF MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.35.1 | Nodef3OspfConfigObjects | |||
| 1.3.6.1.4.1.2544.1.12.35.1.1 | Tablef3OspfRouterTable | not-accessible | current | A list of entries corresponding to OSPF Router instance for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1 | Rowf3OspfRouterEntry | not-accessible | current | A conceptual row in the f3OspfRouterTable. |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.1 | Columnf3OspfRouterIndex | not-accessible | current | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.2 | Columnf3OspfRouterMetricType | read-create | current | The metric type can be specified to define how the cost of redistributed routes are to be calculated. This attribute must be set to zero if f3OspfRouterMetric … |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.3 | Columnf3OspfRouterMetric | read-create | current | The metric value to use as the default cost to be associated with any redistributed routes. This attribute must be set to zero if the f3OspfRouterMetricType ha… |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.4 | Columnf3OspfRouterRedistributionType | read-create | current | The redistribution type is used to enable redistribution of routes of a specified protocol. |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.5 | Columnf3OspfRouterNumAttachedAreas | read-only | current | Number of attached areas for the OSPF Router. |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.6 | Columnf3OspfRouterAreaBdrRtrStatus | read-create | current | A flag to note whether this router is an Area Border Router. |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.7 | Columnf3OspfRouterStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.35.1.1.1.8 | Columnf3OspfRouterRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.35.1.2 | Tablef3OspfAreaTable | not-accessible | current | A list of entries corresponding to OSPF Area configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1 | Rowf3OspfAreaEntry | not-accessible | current | A conceptual row in the f3OspfAreaTable. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.1 | Columnf3OspfAreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.2 | Columnf3OspfAreaType | read-create | current | The type of an area. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.3 | Columnf3OspfAreaAuthType | read-create | current | The authentication type specifies whether no authentication, simple authentication, or MD5 authentication is required for this area. Keying information must be… |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.4 | Columnf3OspfAreaDefaultCost | read-create | current | The default cost for summary LSA's announced to stubby areas. This only applies to stubby areas. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.5 | Columnf3OspfAreaSpfRuns | read-only | current | A count of the number of times the Shortest Path algorithm has been run for this area. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.6 | Columnf3OspfAreaLsaCount | read-only | current | The total number of link state advertisements in this area's link state database, excluding AS-external LSAs. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.7 | Columnf3OspfAreaStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.35.1.2.1.8 | Columnf3OspfAreaRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.35.1.3 | Tablef3OspfIpInterfaceExtTable | not-accessible | current | A list of entries corresponding to OSPF Interface configuration purposes. This table extends cmIpInterfaceTable from CM-IP-MIB. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1 | Rowf3OspfIpInterfaceExtEntry | not-accessible | current | A conceptual row in the f3OspfIpInterfaceExtTable. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.1 | Columnf3OspfIpInterfaceExtStatus | read-write | current | The OSPF admin status for the IP Interface. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.2 | Columnf3OspfIpInterfaceExtAreaId | read-write | current | The Area ID with which this IP Interface is associated. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.3 | Columnf3OspfIpInterfaceExtIfType | read-write | current | The OSPF interface type for the IP Interface. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.4 | Columnf3OspfIpInterfaceExtHelloInterval | read-write | current | The number of seconds between OSPF Hello packets for the IP Interface. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.5 | Columnf3OspfIpInterfaceExtRtrDeadInterval | read-write | current | The number of seconds that must pass from the last received Hello packet before a neighbor router is declared down. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.6 | Columnf3OspfIpInterfaceExtRetransInterval | read-write | current | The number of seconds for the Retransmit Timer Interval value for the IP Interface. The value is used when retransmitting Database Description and Link State R… |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.7 | Columnf3OspfIpInterfaceExtRtrPriority | read-write | current | The OSPF router priority for the IP Interface. The router with the highest priority will be more eligible to become Designated Router. Setting the value to 0 m… |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.8 | Columnf3OspfIpInterfaceExtCost | read-write | current | The cost associated with the IP Interface for use in the Shortest Path calculations. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.9 | Columnf3OspfIpInterfaceExtAuthType | read-write | current | The OSPF authentication type for the IP Interface. This value supersedes the authentication type defined for the Area. |
| 1.3.6.1.4.1.2544.1.12.35.1.3.1.10 | Columnf3OspfIpInterfaceExtAuthKey | read-write | current | The OSPF authentication key for the IP Interface. If the authentication type is Simple, the authentication key is limited to 8 characters. If the authenticatio… |
| 1.3.6.1.4.1.2544.1.12.35.1.4 | Tablef3OspfIpMgmtTunnelExtTable | not-accessible | current | A list of entries corresponding to OSPF Interface configuration purposes. This table extends ipManagementTunnelTable from CM-IP-MIB. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1 | Rowf3OspfIpMgmtTunnelExtEntry | not-accessible | current | A conceptual row in the f3OspfIpMgmtTunnelExtTable. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.1 | Columnf3OspfIpMgmtTunnelExtStatus | read-write | current | The OSPF admin status for the IP Management Tunnel. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.2 | Columnf3OspfIpMgmtTunnelExtAreaId | read-write | current | The Area ID with which this IP Management Tunnel is associated. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.3 | Columnf3OspfIpMgmtTunnelExtIfType | read-write | current | The OSPF interface type for the IP Management Tunnel. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.4 | Columnf3OspfIpMgmtTunnelExtHelloInterval | read-write | current | The number of seconds between OSPF Hello packets for the IP Management Tunnel. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.5 | Columnf3OspfIpMgmtTunnelExtRtrDeadInterval | read-write | current | The number of seconds that must pass from the last received Hello packet before a neighbor router is declared down. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.6 | Columnf3OspfIpMgmtTunnelExtRetransInterval | read-write | current | The number of seconds for the Retransmit Timer Interval value for the IP Interface. The value is used when retransmitting Database Description and Link State R… |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.7 | Columnf3OspfIpMgmtTunnelExtRtrPriority | read-write | current | The OSPF router priority for the IP Management Tunnel. The router with the highest priority will be more eligible to become Designated Router. Setting the valu… |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.8 | Columnf3OspfIpMgmtTunnelExtCost | read-write | current | The cost associated with the IP Management Tunnel for use in the Shortest Path calculations. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.9 | Columnf3OspfIpMgmtTunnelExtAuthType | read-write | current | The OSPF authentication type for the IP Management Tunnel. This value supersedes the authentication type defined for the Area. |
| 1.3.6.1.4.1.2544.1.12.35.1.4.1.10 | Columnf3OspfIpMgmtTunnelExtAuthKey | read-write | current | The OSPF authentication key for the IP Management Tunnel. If the authentication type is Simple, the authentication key is limited to 8 characters. If the authe… |
| 1.3.6.1.4.1.2544.1.12.35.1.5 | Tablef3OspfNbrExtTable | not-accessible | current | This table extends ospfNbrTable from OSPF-MIB. |
| 1.3.6.1.4.1.2544.1.12.35.1.5.1 | Rowf3OspfNbrExtEntry | not-accessible | current | A conceptual row in the f3OspfNbrExtTable. |
| 1.3.6.1.4.1.2544.1.12.35.1.5.1.1 | Columnf3OspfNbrExtRole | read-only | current | The OSPF role for this neighbor router. |
| 1.3.6.1.4.1.2544.1.12.35.2 | Nodef3OspfConformance | |||
| 1.3.6.1.4.1.2544.1.12.35.2.1 | Nodef3OspfCompliances | |||
| 1.3.6.1.4.1.2544.1.12.35.2.1.1 | Compliancef3OspfCompliance | current | Describes the requirements for conformance to the F3-OSPF-MIB compilance. | |
| 1.3.6.1.4.1.2544.1.12.35.2.2 | Nodef3OspfGroups | |||
| 1.3.6.1.4.1.2544.1.12.35.2.2.1 | Groupf3OspfRouterGroup | current | A collection of objects used to manage the OSPF Router. | |
| 1.3.6.1.4.1.2544.1.12.35.2.2.2 | Groupf3OspfAreaGroup | current | A collection of objects used to manage the OSPF Area. | |
| 1.3.6.1.4.1.2544.1.12.35.2.2.3 | Groupf3OspfIpInterfaceExtGroup | current | A collection of objects used to manage OSPF configuration of IP Interface. | |
| 1.3.6.1.4.1.2544.1.12.35.2.2.4 | Groupf3OspfIpMgmtTunnelExtGroup | current | A collection of objects used to manage OSPF configuration of IP Management Tunnel. | |
| 1.3.6.1.4.1.2544.1.12.35.2.2.5 | Groupf3OspfNbrExtGroup | current | A collection of objects used to manage OSPF configuration of OSPF Neighbor. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OspfAreaType | INTEGER { normal (1), stub (2) } | current | The OSPF area type. |
| OspfMetricType | INTEGER { e1 (1), e2 (2) } | current | The metric type can be specified to define how the cost of redistributed routes are to be calculated. A metric type of E1 means that the redistribution cost plus the cost to the ASBR is used for the route while a metric… |
| OspfRedistributionType | INTEGER { none (1), rip (2) } | current | Enables redistribution of routes of a specific protocol or kind into OSPF. The only supported type is RIP. |
| OspfRole | INTEGER { bdr (1), dr (2), drother (3) } | current | The OSPF role of the neighbor router. |
| OspfState | INTEGER { enabled (1), disabled (2), passive (3) } | current | Allows user configuration of the behavior associated with the OSPF interface. ENABLED - OSPF is enabled and the interface will send HELLOs and form adjacencies. DISABLED - the interface is not advertised and does not pa… |