F3-SYNC-MIB
87 objects
This module defines the Synchronization MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | AdminState F3DisplayString OperationalState SecondaryState |
| CM-ENTITY-MIB | neIndex shelfIndex slotIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.12 | Identityf3SyncMIB | This module defines the Synchronization MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.12.1 | Nodef3SyncObjects | |||
| 1.3.6.1.4.1.2544.1.12.12.1.1 | Tablef3SyncTable | not-accessible | current | A list of entries corresponding to the Sync entities. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1 | Rowf3SyncEntry | not-accessible | current | An entry containing information applicable to a particular Sync Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.1 | Columnf3SyncIndex | read-only | current | Unique index value associated with the Synchronization Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.2 | Columnf3SyncAdminState | read-write | current | This object represents the Administrative State of the Sync Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.3 | Columnf3SyncOperationalState | read-only | current | This object represents the Operational State of the Sync Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.4 | Columnf3SyncSecondaryState | read-only | current | This object represents the Secondary State of the Sync Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.5 | Columnf3SyncNetworkClockType | read-write | current | This object represents the regional clock type for the system. This object determines which QL codes are supported. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.6 | Columnf3SyncSelectedReference | read-only | current | This object provides the source of the currently selected Sync reference. This would be the OID of the actual entity (bits port, traffic port etc.). An OID val… |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.7 | Columnf3SyncClockMode | read-only | current | This object provides the system clock mode. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.8 | Columnf3SyncQL | read-only | current | This object provides the QL of the system reference. This is the value for each external reference’s Transmit QL attribute unless it should be transmitting Q… |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.9 | Columnf3SyncAlias | read-create | current | This object allows SNMP management entities to provide an alias to the Sync entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.10 | Columnf3SyncDomain | read-write | current | This object represents the Sync entity's domain type. A Sync entity can be in chassis (system) domain (applicable for HUB shelf and Aggregation shelf) or line … |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.11 | Columnf3SyncSelectionMode | read-write | current | This object represents the Sync entity's selection mode. If this mode is configured as ql-mode, the selection of which reference should be used shall be based … |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.12 | Columnf3SyncWaitToRestoreTime | read-write | current | This object allows configuration of the Sync entity's wait-to-restore time (in minutes). A value of 0 disables WTR timers for all references. |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.13 | Columnf3SyncOperationSyncRef | read-write | current | This object allows configuration of the Object Identifier of the Sync Reference Entity on which the f3SyncOperationType is performed. A value of 0.0 denotes no… |
| 1.3.6.1.4.1.2544.1.12.12.1.1.1.14 | Columnf3SyncOperationType | read-write | current | This object allows to perform the specified operation on the Sync Reference specified by f3SyncOperationSyncRef. |
| 1.3.6.1.4.1.2544.1.12.12.1.2 | Tablef3SyncRefTable | not-accessible | current | A list of entries corresponding to the Sync Reference entities. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1 | Rowf3SyncRefEntry | not-accessible | current | An entry containing information applicable to a particular Sync Reference Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.1 | Columnf3SyncRefIndex | read-only | current | Unique index value associated with the Sync Reference Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.2 | Columnf3SyncRefReference | read-create | current | This object represents the external sync reference to be used as system clock reference source. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.3 | Columnf3SyncRefPriority | read-create | current | This object represents the priority of the external sync reference to be used as system clock reference source. This value is not mandatory when a single clock… |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.4 | Columnf3SyncRefStatus | read-only | current | This object provides the sync reference status. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.5 | Columnf3SyncRefState | read-only | current | This object provides the sync reference state. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.6 | Columnf3SyncRefReceivedQL | read-only | current | This object provides the sync reference received QL. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.7 | Columnf3SyncRefStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.8 | Columnf3SyncRefRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.9 | Columnf3SyncRefAlias | read-create | current | This object allows SNMP management entities to provide an alias to the Sync Reference entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.10 | Columnf3SyncRefEffectiveQL | read-only | current | This object provides the sync reference effective QL. |
| 1.3.6.1.4.1.2544.1.12.12.1.2.1.11 | Columnf3SyncRefOperationType | read-only | current | This object provides information on the current/active operation on this sync reference. |
| 1.3.6.1.4.1.2544.1.12.12.1.3 | Tablef3TimeClockTable | not-accessible | current | A list of entries corresponding to the Time Clock entities. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1 | Rowf3TimeClockEntry | not-accessible | current | An entry containing information applicable to a particular Time Clock Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.1 | Columnf3TimeClockIndex | not-accessible | current | Unique index value associated with the Time Clock Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.2 | Columnf3TimeClockAlias | read-write | current | This object allows SNMP management entities to provide an alias to the Time Clock entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.3 | Columnf3TimeClockAdminState | read-write | current | This object represents the Administrative State of the Time Clock Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.4 | Columnf3TimeClockOperationalState | read-only | current | This object represents the Operational State of the Time Clock Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.5 | Columnf3TimeClockSecondaryState | read-only | current | This object represents the Secondary State of the Time Clock Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.6 | Columnf3TimeClockSelectedReference | read-only | current | This object provides the source of the currently selected Time Clock reference. This would be the OID of the actual entity (GPS port, PPS port etc.). An OID va… |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.7 | Columnf3TimeClockClockMode | read-only | current | This object provides the Time Clock mode. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.8 | Columnf3TimeClockClockClass | read-only | deprecated | This object provides the Time Clock Clock Class |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.9 | Columnf3TimeClockSelectionMode | read-write | current | !! Currently Only Priority Mode is supported !! This object represents the Time Clock entity's selection mode. If this mode is configured as ql-mode, the selec… |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.10 | Columnf3TimeClockWaitToRestoreTime | read-write | current | This object allows configuration of the Time Clock entity's wait-to-restore time (in minutes). A value of 0 disables WTR timers for all references. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.11 | Columnf3TimeClockOperationTimeClockRef | read-write | current | This object allows configuration of the Object Identifier of the TimeClock Reference Entity on which the f3TimeClockOperationType is performed. A value of 0.0 … |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.12 | Columnf3TimeClockOperationType | read-write | current | This object allows to perform the specified operation on the Time Clock Reference specified by f3TimeClockOperationTimeClockRef. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.13 | Columnf3TimeClockLeap59 | read-only | current | True if last minute of current UTC day contains 59 seconds, else false |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.14 | Columnf3TimeClockLeap61 | read-only | current | True if last minute of current UTC day contains 61 seconds, else false |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.15 | Columnf3TimeClockTimeTraceAbilityStatus | read-only | current | This object describe the trace ability status. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.16 | Columnf3TimeClockExpectedQL | read-write | current | This object describe the expected quality level. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.17 | Columnf3TimeClockCurrentQL | read-only | current | This object describe the current quality level. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.18 | Columnf3TimeClockSyncRefCandidate | read-write | current | This object describe whether it is sync reference candiddate. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.19 | Columnf3TimeClockTimeHoldoverPerformance | read-write | current | This object describe the Holdover performance. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.20 | Columnf3TimeClockUtcOffset | read-only | current | This object describe the UTC offset. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.21 | Columnf3TimeClockCurrentTimeOfDay | read-only | current | This object allows specification of the Time Clock Current Time of Day. |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.22 | Columnf3TimeClockFrequencyReference | read-write | current | This object provides the source of the currently selected frequency source for the Time Clock. This would be the OID of the actual entity (GNSS Receiver port, … |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.23 | Columnf3TimeClockFrequencyClockMode | read-only | current | This object provides the Frequency Clock mode determined according to the used f3TimeClockFrequencyReference. In Case the f3TimeClockFrequencyReference is not … |
| 1.3.6.1.4.1.2544.1.12.12.1.4 | Tablef3TimeClockRefTable | not-accessible | current | A list of entries corresponding to the Time Clock Reference entities. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1 | Rowf3TimeClockRefEntry | not-accessible | current | An entry containing information applicable to a particular Time Clock Reference Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.1 | Columnf3TimeClockRefIndex | not-accessible | current | Unique index value associated with the Time Clock Reference Entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.2 | Columnf3TimeClockRefAlias | read-create | current | This object allows SNMP management entities to provide an alias to the Time Clock Reference entity. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.3 | Columnf3TimeClockRefReference | read-create | current | This object represents the external reference to be used as system clock reference source. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.4 | Columnf3TimeClockRefPriority | read-create | current | This object represents the priority of the external reference to be used as Time clock reference source. This value is not mandatory when a single clock refere… |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.5 | Columnf3TimeClockRefStatus | read-only | current | This object provides the Time Clock reference status. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.6 | Columnf3TimeClockRefState | read-only | current | This object provides the Time Clock reference state. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.7 | Columnf3TimeClockRefOperationType | read-only | current | This object provides information on the current/active operation on this Time Clock reference. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.8 | Columnf3TimeClockRefStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.12.1.4.1.9 | Columnf3TimeClockRefRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.12.2 | Nodef3SyncConformance | |||
| 1.3.6.1.4.1.2544.1.12.12.2.1 | Nodef3SyncCompliances | |||
| 1.3.6.1.4.1.2544.1.12.12.2.1.1 | Compliancef3SyncCompliance | current | Describes the requirements for conformance to the F3 Sync group. | |
| 1.3.6.1.4.1.2544.1.12.12.2.2 | Nodef3SyncGroups | |||
| 1.3.6.1.4.1.2544.1.12.12.2.2.1 | Groupf3SyncObjectGroup | current | A collection of objects used to manage the F3 Sync Object group. | |
| 1.3.6.1.4.1.2544.1.12.12.2.2.2 | Groupf3TimeClockObjectGroup | current | A collection of objects used to manage the F3 TimeClock Object group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ClockMode | INTEGER { notAvailable(0), freerun (1), holdover (2), tracking (3), lossoflock (4), locked (5), bypass(6) } | current | Enumerations for Clock Mode. freerun - Free Run, holdover - Hold over, tracking - Tracking, lossoflock - Loss of Lock, locked - Locked, bypass - the frequency entity is not functioning and is being bypassed. One of its … |
| HoldoverAccuracy | INTEGER { time-500ns(1), time-1000ns(2), time-1500ns(3), time-5000ns(4), time-10000ns(5) } | current | |
| NetworkClockType | INTEGER { option1 (1), option2 (2) } | current | Enumerations for Network Clock Type. option1 - represents an SDH regional clock type, option2 - represents a SONET regional clock type. |
| SquelchControl | INTEGER { never(1), holdover (2), lock (3), squelch-ql(4) } | current | Describes the Squelch Control of the PTP ports. |
| SSMQualityLevel | INTEGER { not-applicable(0), ql-dnu (1), ql-eec1 (2), ql-eec2 (3), ql-inv (4), ql-inv0 (5), ql-inv1 (6), ql-inv2 (7), ql-inv3 (8), ql-inv5 (9), ql-inv7 (10), ql-inv8 (11), ql-inv9 (12), ql-inv10 (13), ql-inv11 (14), ql-inv12 (15), ql-none (16), ql-nsupp (17), ql-prc (18), ql-prov (19), ql-prs (20), ql-smc (21), ql-ssu-a (22), ql-ssu-b (23), ql-st2 (24), ql-st3e (25), ql-stu (26), ql-tnc (27), ql-unc (28), ql-failed(29), ql-inv6(30), ql-inv13(31), ql-inv14(32), ql-dus (33), ql-na (34) } | current | Enumerations for Sync Status Messages Quality Level |
| SyncDomainType | INTEGER { chassis(1), linecard(2) } | current | Enumerations for Sync Domain type, chassis, linecard. |
| SyncOperationType | INTEGER { none(1), forcedswitch(2), manualswitch(3), lockout(4), clearwtr(5), clearlockout(6), clearswitch(7) } | current | Enumerations for Sync Operation Type, none - No action, forcedswitch - can be used to override the currently selected reference, assuming the the chosen reference is not locked out. A forced switch overrides a manual sw… |
| SyncRefState | INTEGER { not-applicable(0), active(1), standby(2), unavailable(3), lockedout(4) } | current | Enumerations for Sync Reference state, active, standby, unavailable. |
| SyncRefStatus | INTEGER { not-applicable(0), ref-ok(1), ref-failed(2), ref-freq-ok(3) } | current | Enumerations for Sync Reference status, ref-ok, ref-failed. |
| SyncSelectionMode | INTEGER { ql-mode(1), priority-mode(2) } | current | Enumerations for Sync Selection Mode, ql-mode, priority-mode. |
| TimeClockMode | INTEGER { freerun (1), warmup (2), tracking (3), transition (4), holdover (5), locked (6) } | current | Enumerations for Time Clock Mode. freerun - Free Run, warmup - Warm Up, tracking - Tracking, transition - Transition, holdover - Holdover, locked - Locked. |
| TimeHoldoverPerformance | INTEGER { time-500ns(1), time-1000ns(2), time-1500ns(3), time-5000ns(4), time-10000ns(5), time-0ns(6), time-100ns(7) } | current | |
| TimeSource | INTEGER { atomic(1), gps(2), ptp(3), internal(4), other(5) } | current | Enumerations for Time Source, atomic, gps, ptp, internal, other. |
| TimeTraceAbilityStatus | INTEGER { notTraceAble (1), timeLocked (2), timeFreqLock (3), timeHoldover (4) } | current | Describes the time trace ability status. |